The University of Southampton
University of Southampton Institutional Repository

Micro- and nanomechanical analysis of articular cartilage by indentation-type atomic force microscopy: validation with a gel-microfiber composite microscopy

Micro- and nanomechanical analysis of articular cartilage by indentation-type atomic force microscopy: validation with a gel-microfiber composite microscopy
Micro- and nanomechanical analysis of articular cartilage by indentation-type atomic force microscopy: validation with a gel-microfiber composite microscopy
As documented previously, articular cartilage exhibits a scale-dependent dynamic stiffness when probed by indentation-type atomic force microscopy (IT-AFM). In this study, a micrometer-size spherical tip revealed an unimodal stiffness distribution (which we refer to as microstiffness), whereas probing articular cartilage with a nanometer-size pyramidal tip resulted in a bimodal nanostiffness distribution. We concluded that indentation of the cartilage's soft proteoglycan (PG) gel gave rise to the lower nanostiffness peak, whereas deformation of its collagen fibrils yielded the higher nanostiffness peak. To test our hypothesis, we produced a gel-microfiber composite consisting of a chondroitin sulfate-containing agarose gel and a fibrillar poly(ethylene glycol)-terephthalate/poly(butylene)-terephthalate block copolymer. In striking analogy to articular cartilage, the microstiffness distribution of the synthetic composite was unimodal, whereas its nanostiffness exhibited a bimodal distribution. Also, similar to the case with cartilage, addition of the negatively charged chondroitin sulfate rendered the gel-microfiber composite's water content responsive to salt. When the ionic strength of the surrounding buffer solution increased from 0.15 to 2 M NaCl, the cartilage's microstiffness increased by 21%, whereas that of the synthetic biomaterial went up by 31%. When the nanostiffness was measured after the ionic strength was raised by the same amount, the cartilage's lower peak increased by 28%, whereas that of the synthetic biomaterial went up by 34%. Of interest, the higher peak values remained unchanged for both materials. Taken together, these results demonstrate that the nanoscale lower peak is a measure of the soft PG gel, and the nanoscale higher peak measures collagen fibril stiffness. In contrast, the micrometer-scale measurements fail to resolve separate stiffness values for the PG and collagen fibril moieties. Therefore, we propose to use nanostiffness as a new biomarker to analyze structure-function relationships in normal, diseased, and engineered cartilage.
0006-3495
2731-2740
Loparic, Marko
4e68cec6-e997-4eae-af08-ba4548caebce
Wirz, Dieter
9b54711d-f9fc-4ba5-a0d2-916d7274efe6
Daniels, A.U.
79d2d48d-1aa7-4584-9924-5328ca4c8650
Raiteri, Roberto
6242d937-2e7f-4b42-a19e-320f9b420144
VanLandingham, Mark R.
caaf6166-9e41-458e-8d04-432bf00d57c3
Guex, Geraldine
7edc385a-618c-45eb-bd16-603665bc8884
Martin, Ivan
a6c0b810-3113-43cd-aa25-243a5f05364b
Aebi, Ueli
ea7e2491-b815-4ea3-a657-28e2e057f09f
Stolz, Martin
7bfa1d59-511d-471b-96ce-679b343b5d1d
Loparic, Marko
4e68cec6-e997-4eae-af08-ba4548caebce
Wirz, Dieter
9b54711d-f9fc-4ba5-a0d2-916d7274efe6
Daniels, A.U.
79d2d48d-1aa7-4584-9924-5328ca4c8650
Raiteri, Roberto
6242d937-2e7f-4b42-a19e-320f9b420144
VanLandingham, Mark R.
caaf6166-9e41-458e-8d04-432bf00d57c3
Guex, Geraldine
7edc385a-618c-45eb-bd16-603665bc8884
Martin, Ivan
a6c0b810-3113-43cd-aa25-243a5f05364b
Aebi, Ueli
ea7e2491-b815-4ea3-a657-28e2e057f09f
Stolz, Martin
7bfa1d59-511d-471b-96ce-679b343b5d1d

Loparic, Marko, Wirz, Dieter, Daniels, A.U., Raiteri, Roberto, VanLandingham, Mark R., Guex, Geraldine, Martin, Ivan, Aebi, Ueli and Stolz, Martin (2010) Micro- and nanomechanical analysis of articular cartilage by indentation-type atomic force microscopy: validation with a gel-microfiber composite microscopy. Biophysical Journal, 98 (11), 2731-2740. (doi:10.1016/j.bpj.2010.02.013).

Record type: Article

Abstract

As documented previously, articular cartilage exhibits a scale-dependent dynamic stiffness when probed by indentation-type atomic force microscopy (IT-AFM). In this study, a micrometer-size spherical tip revealed an unimodal stiffness distribution (which we refer to as microstiffness), whereas probing articular cartilage with a nanometer-size pyramidal tip resulted in a bimodal nanostiffness distribution. We concluded that indentation of the cartilage's soft proteoglycan (PG) gel gave rise to the lower nanostiffness peak, whereas deformation of its collagen fibrils yielded the higher nanostiffness peak. To test our hypothesis, we produced a gel-microfiber composite consisting of a chondroitin sulfate-containing agarose gel and a fibrillar poly(ethylene glycol)-terephthalate/poly(butylene)-terephthalate block copolymer. In striking analogy to articular cartilage, the microstiffness distribution of the synthetic composite was unimodal, whereas its nanostiffness exhibited a bimodal distribution. Also, similar to the case with cartilage, addition of the negatively charged chondroitin sulfate rendered the gel-microfiber composite's water content responsive to salt. When the ionic strength of the surrounding buffer solution increased from 0.15 to 2 M NaCl, the cartilage's microstiffness increased by 21%, whereas that of the synthetic biomaterial went up by 31%. When the nanostiffness was measured after the ionic strength was raised by the same amount, the cartilage's lower peak increased by 28%, whereas that of the synthetic biomaterial went up by 34%. Of interest, the higher peak values remained unchanged for both materials. Taken together, these results demonstrate that the nanoscale lower peak is a measure of the soft PG gel, and the nanoscale higher peak measures collagen fibril stiffness. In contrast, the micrometer-scale measurements fail to resolve separate stiffness values for the PG and collagen fibril moieties. Therefore, we propose to use nanostiffness as a new biomarker to analyze structure-function relationships in normal, diseased, and engineered cartilage.

This record has no associated files available for download.

More information

Published date: 2 June 2010
Organisations: Engineering Mats & Surface Engineerg Gp

Identifiers

Local EPrints ID: 71693
URI: http://eprints.soton.ac.uk/id/eprint/71693
ISSN: 0006-3495
PURE UUID: b29a7c36-fa9d-4b8b-8427-d0d338ba022e
ORCID for Martin Stolz: ORCID iD orcid.org/0000-0002-0732-0811

Catalogue record

Date deposited: 21 Dec 2009
Last modified: 14 Mar 2024 02:55

Export record

Altmetrics

Contributors

Author: Marko Loparic
Author: Dieter Wirz
Author: A.U. Daniels
Author: Roberto Raiteri
Author: Mark R. VanLandingham
Author: Geraldine Guex
Author: Ivan Martin
Author: Ueli Aebi
Author: Martin Stolz ORCID iD

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×