The University of Southampton
University of Southampton Institutional Repository

NanTroSEIZE Stage 2: NanTroSEIZE riser/riserless observatory, IODP Expedition 319 Preliminary Report, 10 May–31 August 2009

NanTroSEIZE Stage 2: NanTroSEIZE riser/riserless observatory, IODP Expedition 319 Preliminary Report, 10 May–31 August 2009
NanTroSEIZE Stage 2: NanTroSEIZE riser/riserless observatory, IODP Expedition 319 Preliminary Report, 10 May–31 August 2009
The Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) is a coordinated, multiexpedition drilling project designed to investigate fault mechanics and seismogenesis along subduction megathrusts through direct sampling, in situ measurements, and long-term monitoring in conjunction with allied laboratory and numerical modeling studies. The fundamental scientific objectives of the NanTroSEIZE project include characterizing the nature of fault slip and strain accumulation, fault and wall rock composition, fault architecture, and state variables throughout the active plate boundary system. As part of the NanTroSEIZE program, operations during Integrated Ocean Drilling Program (IODP) Expedition 319 included riser drilling, analyses of cuttings and core samples, downhole measurements and logging, and casing at Site C0009 in the Kumano forearc basin as well as riserless drilling, logging while drilling (LWD), casing, and observatory operations at Site C0010 across a major splay fault (termed the "megasplay") that bounds the seaward edge of the forearc basin near its updip terminus. In addition, we drilled at contingency Site C0011 to collect logging-while-drilling data in advance of planned coring operations scheduled as part of IODP Expedition 322.

Site C0009 marked the first riser drilling in IODP history. This allowed several scientific operations unprecedented in IODP, including carefully controlled measurements of in situ pore pressure, permeability and minimum principal stress magnitude, real-time mud gas analysis, and laboratory analyses of cuttings throughout the entire riser-drilled depth range (~700–1600 meters below seafloor [mbsf]). We conducted a leak-off test at one depth interval and successfully deployed the wireline Modular Formation Dynamics Tester 12 times to directly measure in situ stress magnitude, formation pore pressure, and permeability. During all phases of riser drilling, we collected mud gas for geochemical analyses and cuttings samples were collected throughout the entire riser-drilled depth range. Integration of data from cuttings, wireline logging, and cores (from a limited depth interval) allowed definition of a single integrated set of lithologic units and comparison with previously drilled IODP Site C0002 to determine the evolutionary history of the forearc basin. After casing the borehole, we conducted a long-offset (up to 30 km) two-ship active seismic experiment, recording shots within the borehole to image the megasplay and master décollement beneath the borehole, and to evaluate seismic velocity and anisotropy of the forearc basin and accretionary prism sediments around the borehole.

At riserless Site C0010, operations included drilling with measurement while drilling (MWD)/LWD across the megasplay fault to 555 mbsf, casing the borehole with screens at the depth of the fault, conducting an observatory dummy run to test future strainmeter and seismometer deployment procedures, and installation of a temporary pore pressure and temperature monitoring system in advance of planned future permanent observatory emplacement. The observatory system (termed a "smart plug") marks the first observatory installation of the NanTroSEIZE program. MWD/LWD data at this site were used to define unit boundaries and the fault zone target interval for placement of the casing screens. Through comparison with previously drilled Site C0004 these data also provide insights into along-strike differences in the architecture of the megasplay fault and hanging wall.
319
Integrated Ocean Drilling Program Management International, Inc
Saffer, D.
8a49aada-6347-4c10-969d-2f51a1a02610
McNeill, L.C.
1fe6a1e0-ca1a-4b6f-8469-309d0f9de0cf
Araki, E.
ec409510-dbaf-46a4-be44-c8babee86152
Byrne, T.
8daf6b56-0237-49ad-bb69-c3553d654864
Eguchi, N.
8bae6134-8307-414d-9f7e-cadf0788bef9
Toczko, S.
3bd44c94-ce66-4036-8258-d6980c01400e
Takahashi, K.
688388ae-ea43-48e0-a27e-e07871bc4915
Saffer, D.
8a49aada-6347-4c10-969d-2f51a1a02610
McNeill, L.C.
1fe6a1e0-ca1a-4b6f-8469-309d0f9de0cf
Araki, E.
ec409510-dbaf-46a4-be44-c8babee86152
Byrne, T.
8daf6b56-0237-49ad-bb69-c3553d654864
Eguchi, N.
8bae6134-8307-414d-9f7e-cadf0788bef9
Toczko, S.
3bd44c94-ce66-4036-8258-d6980c01400e
Takahashi, K.
688388ae-ea43-48e0-a27e-e07871bc4915

Saffer, D., McNeill, L.C., Araki, E., Byrne, T., Eguchi, N., Toczko, S. and Takahashi, K. (2009) NanTroSEIZE Stage 2: NanTroSEIZE riser/riserless observatory, IODP Expedition 319 Preliminary Report, 10 May–31 August 2009 (IODP Preliminary Reports, 319) Tokyo, JP. Integrated Ocean Drilling Program Management International, Inc 83pp. (doi:10.2204/iodp.pr.319.2009).

Record type: Monograph (Project Report)

Abstract

The Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) is a coordinated, multiexpedition drilling project designed to investigate fault mechanics and seismogenesis along subduction megathrusts through direct sampling, in situ measurements, and long-term monitoring in conjunction with allied laboratory and numerical modeling studies. The fundamental scientific objectives of the NanTroSEIZE project include characterizing the nature of fault slip and strain accumulation, fault and wall rock composition, fault architecture, and state variables throughout the active plate boundary system. As part of the NanTroSEIZE program, operations during Integrated Ocean Drilling Program (IODP) Expedition 319 included riser drilling, analyses of cuttings and core samples, downhole measurements and logging, and casing at Site C0009 in the Kumano forearc basin as well as riserless drilling, logging while drilling (LWD), casing, and observatory operations at Site C0010 across a major splay fault (termed the "megasplay") that bounds the seaward edge of the forearc basin near its updip terminus. In addition, we drilled at contingency Site C0011 to collect logging-while-drilling data in advance of planned coring operations scheduled as part of IODP Expedition 322.

Site C0009 marked the first riser drilling in IODP history. This allowed several scientific operations unprecedented in IODP, including carefully controlled measurements of in situ pore pressure, permeability and minimum principal stress magnitude, real-time mud gas analysis, and laboratory analyses of cuttings throughout the entire riser-drilled depth range (~700–1600 meters below seafloor [mbsf]). We conducted a leak-off test at one depth interval and successfully deployed the wireline Modular Formation Dynamics Tester 12 times to directly measure in situ stress magnitude, formation pore pressure, and permeability. During all phases of riser drilling, we collected mud gas for geochemical analyses and cuttings samples were collected throughout the entire riser-drilled depth range. Integration of data from cuttings, wireline logging, and cores (from a limited depth interval) allowed definition of a single integrated set of lithologic units and comparison with previously drilled IODP Site C0002 to determine the evolutionary history of the forearc basin. After casing the borehole, we conducted a long-offset (up to 30 km) two-ship active seismic experiment, recording shots within the borehole to image the megasplay and master décollement beneath the borehole, and to evaluate seismic velocity and anisotropy of the forearc basin and accretionary prism sediments around the borehole.

At riserless Site C0010, operations included drilling with measurement while drilling (MWD)/LWD across the megasplay fault to 555 mbsf, casing the borehole with screens at the depth of the fault, conducting an observatory dummy run to test future strainmeter and seismometer deployment procedures, and installation of a temporary pore pressure and temperature monitoring system in advance of planned future permanent observatory emplacement. The observatory system (termed a "smart plug") marks the first observatory installation of the NanTroSEIZE program. MWD/LWD data at this site were used to define unit boundaries and the fault zone target interval for placement of the casing screens. Through comparison with previously drilled Site C0004 these data also provide insights into along-strike differences in the architecture of the megasplay fault and hanging wall.

This record has no associated files available for download.

More information

Published date: 2009

Identifiers

Local EPrints ID: 178289
URI: http://eprints.soton.ac.uk/id/eprint/178289
PURE UUID: 5335ce68-6d97-4655-8fc1-ac04a8f4767c
ORCID for L.C. McNeill: ORCID iD orcid.org/0000-0002-8689-5882

Catalogue record

Date deposited: 24 Mar 2011 10:08
Last modified: 15 Mar 2024 03:09

Export record

Altmetrics

Contributors

Author: D. Saffer
Author: L.C. McNeill ORCID iD
Author: E. Araki
Author: T. Byrne
Author: N. Eguchi
Author: S. Toczko
Author: K. Takahashi

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×