The University of Southampton
University of Southampton Institutional Repository

Near wall flow over urban-like roughness

Near wall flow over urban-like roughness
Near wall flow over urban-like roughness
In this study, comprehensive measurements over a number of urban-type surfaces with the same area density of 25% have been performed in a wind tunnel. The experiments were conducted at a free stream velocity of 10 m s-1 and the main instrumentation was 120 ° x-wire anemometry, but measurement accuracy was checked using laser Doppler anemometry. The results have confirmed the strong three-dimensionality of the turbulent flow in the roughness sublayer and the depths of the inertial sublayer (log-law region) and roughness sublayer for each surface have been determined. Spatial averaging has been used to remove the variability of the flow in the roughness sublayer due to individual obstacles and it is shown that the spatially averaged mean velocity in the inertial sublayer and roughness sublayer can, together, be described by a single log-law with a mean zero-plane displacement and roughness length for the surface, provided that the proper surface stress is known. The spatially averaged shear stresses in the inertial sublayer and roughness sublayer are compared with the surface stress deduced from form drag measurements on the roughness elements themselves. The dispersive stress arising from the spatial inhomogeneity in the mean flow profiles was deduced from the data and is shown to be negligible compared with the usual Reynolds stresses in the roughness sublayer. Comparisons have been made between a homogeneous (regular element array) surface and one consisting of random height elements of the same total volume. Although the upper limits of the inertial sublayer for both surfaces were almost identical at equivalent fetch, the roughness sublayer was much thicker for the random surface than for the uniform surface, the friction velocity and the roughness length were significantly larger and the 'roughness efficiency' was greater. It is argued that the inertial sublayer may not exist at all in some of the more extreme rough urban areas. These results will provide fundamental information for modelling urban air quality and forecasting urban wind climates.
0006-8314
229-259
Cheng, Hong
01cdf4fe-cc46-484e-82ed-1af57a538e26
Castro, Ian P.
66e6330d-d93a-439a-a69b-e061e660de61
Cheng, Hong
01cdf4fe-cc46-484e-82ed-1af57a538e26
Castro, Ian P.
66e6330d-d93a-439a-a69b-e061e660de61

Cheng, Hong and Castro, Ian P. (2002) Near wall flow over urban-like roughness. Boundary-Layer Meteorology, 104 (2), 229-259. (doi:10.1023/A:1016060103448).

Record type: Article

Abstract

In this study, comprehensive measurements over a number of urban-type surfaces with the same area density of 25% have been performed in a wind tunnel. The experiments were conducted at a free stream velocity of 10 m s-1 and the main instrumentation was 120 ° x-wire anemometry, but measurement accuracy was checked using laser Doppler anemometry. The results have confirmed the strong three-dimensionality of the turbulent flow in the roughness sublayer and the depths of the inertial sublayer (log-law region) and roughness sublayer for each surface have been determined. Spatial averaging has been used to remove the variability of the flow in the roughness sublayer due to individual obstacles and it is shown that the spatially averaged mean velocity in the inertial sublayer and roughness sublayer can, together, be described by a single log-law with a mean zero-plane displacement and roughness length for the surface, provided that the proper surface stress is known. The spatially averaged shear stresses in the inertial sublayer and roughness sublayer are compared with the surface stress deduced from form drag measurements on the roughness elements themselves. The dispersive stress arising from the spatial inhomogeneity in the mean flow profiles was deduced from the data and is shown to be negligible compared with the usual Reynolds stresses in the roughness sublayer. Comparisons have been made between a homogeneous (regular element array) surface and one consisting of random height elements of the same total volume. Although the upper limits of the inertial sublayer for both surfaces were almost identical at equivalent fetch, the roughness sublayer was much thicker for the random surface than for the uniform surface, the friction velocity and the roughness length were significantly larger and the 'roughness efficiency' was greater. It is argued that the inertial sublayer may not exist at all in some of the more extreme rough urban areas. These results will provide fundamental information for modelling urban air quality and forecasting urban wind climates.

This record has no associated files available for download.

More information

Published date: August 2002

Identifiers

Local EPrints ID: 22167
URI: http://eprints.soton.ac.uk/id/eprint/22167
ISSN: 0006-8314
PURE UUID: 14889a20-0e28-423d-b8ab-9d7bd81b67f9

Catalogue record

Date deposited: 13 Mar 2006
Last modified: 15 Mar 2024 06:35

Export record

Altmetrics

Contributors

Author: Hong Cheng
Author: Ian P. Castro

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×