The University of Southampton
University of Southampton Institutional Repository

Electrostatic charge monitoring of unlubricated sliding wear of a bearing steel

Electrostatic charge monitoring of unlubricated sliding wear of a bearing steel
Electrostatic charge monitoring of unlubricated sliding wear of a bearing steel
Previous papers [O.D. Tasbaz, H.E.G. Powrie, R.J.K. Wood, Electrostatic monitoring of oil lubricated contacts for early detection of wear, in: Proceedings of the International Conference on Condition Monitoring, University of Wales Swansea, 12–15 April 1999; Wear 230 (1) (1999) 86; H.E.G. Powrie, O.D. Tasbaz, R.J.K Wood, C.E. Fisher, Performance of an electrostatic oil monitoring system during FZG Scuffing Test, in: Proceedings of the International Conference on Condition Monitoring, University of Wales Swansea, UK, 1999, pp. 155–174; Condition Monitor 177 (2001) 6] have shown that electrostatic sensing technology can be used to successfully monitor adhesive wear processes in oil-lubricated contacts. This work has shown that ‘precursor’ charge signals can be detected prior to the onset of adhesive wear. The possible charging mechanisms involved have been identified as tribocharging, surface charge variations, triboemission and debris generation. This paper details experimental work focused on monitoring the unlubricated wear performance of a bearing steel sliding against a bearing steel using electrostatic sensing technology. Tests were carried out using a modified and instrumented pin-on-disc wear test rig with conditions designed to produce sliding wear in the mild oxidational wear regime. Test results have shown that there is a direct correlation between both the wear rate and coefficient of friction with the magnitude of charge detected. The influence of the periodical formation and delamination of oxidation products is also presented. The charge detected was found to be predominantly negative. The dominant wear related charging mechanism was thought to be surface charging as a result of contact potential difference.
Electrostatic charge, Contact potential difference, Condition monitoring, Mild oxidational wear, Electrostatic monitoring
0043-1648
430-443
Morris, S.
e0829176-4c63-4df7-b487-c40757814b8f
Wood, R.J.K.
d9523d31-41a8-459a-8831-70e29ffe8a73
Harvey, T.J.
3b94322b-18da-4de8-b1af-56d202677e04
Powrie, H.E.G.
7a4ce31f-8441-47a3-827a-5463dcdfedfb
Morris, S.
e0829176-4c63-4df7-b487-c40757814b8f
Wood, R.J.K.
d9523d31-41a8-459a-8831-70e29ffe8a73
Harvey, T.J.
3b94322b-18da-4de8-b1af-56d202677e04
Powrie, H.E.G.
7a4ce31f-8441-47a3-827a-5463dcdfedfb

Morris, S., Wood, R.J.K., Harvey, T.J. and Powrie, H.E.G. (2003) Electrostatic charge monitoring of unlubricated sliding wear of a bearing steel. Wear, 255 (1-6), 430-443. (doi:10.1016/S0043-1648(03)00089-9).

Record type: Article

Abstract

Previous papers [O.D. Tasbaz, H.E.G. Powrie, R.J.K. Wood, Electrostatic monitoring of oil lubricated contacts for early detection of wear, in: Proceedings of the International Conference on Condition Monitoring, University of Wales Swansea, 12–15 April 1999; Wear 230 (1) (1999) 86; H.E.G. Powrie, O.D. Tasbaz, R.J.K Wood, C.E. Fisher, Performance of an electrostatic oil monitoring system during FZG Scuffing Test, in: Proceedings of the International Conference on Condition Monitoring, University of Wales Swansea, UK, 1999, pp. 155–174; Condition Monitor 177 (2001) 6] have shown that electrostatic sensing technology can be used to successfully monitor adhesive wear processes in oil-lubricated contacts. This work has shown that ‘precursor’ charge signals can be detected prior to the onset of adhesive wear. The possible charging mechanisms involved have been identified as tribocharging, surface charge variations, triboemission and debris generation. This paper details experimental work focused on monitoring the unlubricated wear performance of a bearing steel sliding against a bearing steel using electrostatic sensing technology. Tests were carried out using a modified and instrumented pin-on-disc wear test rig with conditions designed to produce sliding wear in the mild oxidational wear regime. Test results have shown that there is a direct correlation between both the wear rate and coefficient of friction with the magnitude of charge detected. The influence of the periodical formation and delamination of oxidation products is also presented. The charge detected was found to be predominantly negative. The dominant wear related charging mechanism was thought to be surface charging as a result of contact potential difference.

This record has no associated files available for download.

More information

Published date: 2003
Keywords: Electrostatic charge, Contact potential difference, Condition monitoring, Mild oxidational wear, Electrostatic monitoring

Identifiers

Local EPrints ID: 22443
URI: http://eprints.soton.ac.uk/id/eprint/22443
ISSN: 0043-1648
PURE UUID: 0ea6007b-609a-49fc-9efe-ee48f4f50c24
ORCID for R.J.K. Wood: ORCID iD orcid.org/0000-0003-0681-9239

Catalogue record

Date deposited: 21 Mar 2006
Last modified: 19 Mar 2024 02:33

Export record

Altmetrics

Contributors

Author: S. Morris
Author: R.J.K. Wood ORCID iD
Author: T.J. Harvey
Author: H.E.G. Powrie

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×