The University of Southampton
University of Southampton Institutional Repository

Some notes on the influence of manufacturing on the fatigue life of welded aluminum marine structures

Some notes on the influence of manufacturing on the fatigue life of welded aluminum marine structures
Some notes on the influence of manufacturing on the fatigue life of welded aluminum marine structures
Designers are constantly looking for ways to reduce the structure weight to lower the overall displacement and hence the cost of fast ferries and other high-speed vessels. The easiest option for the designer is to choose a lightweight material. Aluminum has become the adopted choice of material for high-speed vessels owing to its high strength to weight characteristics. Unlike steel, aluminum is more prone to fatigue cracking and has no fatigue limit. In order to minimize weight, the designer will make use of finite element methods to optimize the scantlings and perform fatigue checks against established codes. This can lead to a structure that has the empirical margins of safety reduced owing to the accuracy of mathematical modeling. However, what is often overlooked is the effect the manufacturing process has on the fatigue life of the fabricated structure. This aspect is excluded from the designer's fatigue calculations, which assist in reducing the scantlings. Currently, there is no guidance for fatigue life reduction for the designer that establishes good and bad workshop practice, other than experience, or the implications of basic shipyard fabrication. It is shown that whereas strain-hardened alloys improve mechanical strength, they reduce ductility. This has consequences when forming the hull plate by potentially introducing cracklike flaws into the alloy matrix if the plater overrolls the plate. If there is misalignment or there is too much gap between the plates, the weld will create localized stress concentrations. If the welder has poor joint preparation or gas shielding, porosity can be introduced into the weld. Porosity has a significant effect on the fatigue life of the weldment. This paper brings together a collection of data on such issues that the designer needs to be aware of to prevent an unwanted fatigue failure in the fabrication process.
8756-1417
164-175
Kecsmar, J.
fe8068f3-ded5-402a-827e-e4f9e714dcfd
Shenoi, R.A.
a37b4e0a-06f1-425f-966d-71e6fa299960
Kecsmar, J.
fe8068f3-ded5-402a-827e-e4f9e714dcfd
Shenoi, R.A.
a37b4e0a-06f1-425f-966d-71e6fa299960

Kecsmar, J. and Shenoi, R.A. (2004) Some notes on the influence of manufacturing on the fatigue life of welded aluminum marine structures. Journal of Ship Production, 20 (3), 164-175.

Record type: Article

Abstract

Designers are constantly looking for ways to reduce the structure weight to lower the overall displacement and hence the cost of fast ferries and other high-speed vessels. The easiest option for the designer is to choose a lightweight material. Aluminum has become the adopted choice of material for high-speed vessels owing to its high strength to weight characteristics. Unlike steel, aluminum is more prone to fatigue cracking and has no fatigue limit. In order to minimize weight, the designer will make use of finite element methods to optimize the scantlings and perform fatigue checks against established codes. This can lead to a structure that has the empirical margins of safety reduced owing to the accuracy of mathematical modeling. However, what is often overlooked is the effect the manufacturing process has on the fatigue life of the fabricated structure. This aspect is excluded from the designer's fatigue calculations, which assist in reducing the scantlings. Currently, there is no guidance for fatigue life reduction for the designer that establishes good and bad workshop practice, other than experience, or the implications of basic shipyard fabrication. It is shown that whereas strain-hardened alloys improve mechanical strength, they reduce ductility. This has consequences when forming the hull plate by potentially introducing cracklike flaws into the alloy matrix if the plater overrolls the plate. If there is misalignment or there is too much gap between the plates, the weld will create localized stress concentrations. If the welder has poor joint preparation or gas shielding, porosity can be introduced into the weld. Porosity has a significant effect on the fatigue life of the weldment. This paper brings together a collection of data on such issues that the designer needs to be aware of to prevent an unwanted fatigue failure in the fabrication process.

This record has no associated files available for download.

More information

Published date: 2004

Identifiers

Local EPrints ID: 22904
URI: http://eprints.soton.ac.uk/id/eprint/22904
ISSN: 8756-1417
PURE UUID: 652687fb-98dd-4fb2-86c0-5b60e154ed87

Catalogue record

Date deposited: 23 Mar 2006
Last modified: 22 Jul 2022 20:27

Export record

Contributors

Author: J. Kecsmar
Author: R.A. Shenoi

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×