The University of Southampton
University of Southampton Institutional Repository

Use of copper cast alloys to control Escherichia coli O157 cross-contamination during food processing

Use of copper cast alloys to control Escherichia coli O157 cross-contamination during food processing
Use of copper cast alloys to control Escherichia coli O157 cross-contamination during food processing
The most notable method of infection from Escherichia coli O157 (E. coli O157) is through contaminated food
products, usually ground beef. The objective of this study was to evaluate seven cast copper alloys (61 to 95%
Cu) for their ability to reduce the viability of E. coli O157, mixed with or without ground beef juice, and to
compare these results to those for stainless steel. E. coli O157 (NCTC 12900) (2 107 CFU) mixed with
extracted beef juice (25%) was inoculated onto coupons of each copper cast alloy or stainless steel and
incubated at either 22°C or 4°C for up to 6 h. E. coli O157 viability was determined by plate counts in addition
to staining in situ with the respiratory indicator fluorochrome 5-cyano-2,3-ditolyl tetrazolium. Without beef
extract, three alloys completely killed the inoculum during the 6-h exposure at 22°C. At 4°C, only the
high-copper alloys (>85%) significantly reduced the numbers of O157. With beef juice, only one alloy (95% Cu)
completely killed the inoculum at 22°C. For stainless steel, no significant reduction in cell numbers occurred.
At 4°C, only alloys C83300 (93% Cu) and C87300 (95% Cu) significantly reduced the numbers of E. coli O157,
with 1.5 and 5 log kills, respectively. Reducing the inoculum to 103 CFU resulted in a complete kill for all seven
cast copper alloys in 20 min or less at 22°C. These results clearly demonstrate the antimicrobial properties of
cast copper alloys with regard to E. coli O157, and consequently these alloys have the potential to aid in food
safety.
0099-2240
4239-4244
Noyce, J.O.
195b81fe-c6e2-4804-a8d4-4ffdca5661a1
Michels, H.
19792f0f-238b-452a-b65b-36f0be5c2f23
Keevil, C.W.
cb7de0a7-ce33-4cfa-af52-07f99e5650eb
Noyce, J.O.
195b81fe-c6e2-4804-a8d4-4ffdca5661a1
Michels, H.
19792f0f-238b-452a-b65b-36f0be5c2f23
Keevil, C.W.
cb7de0a7-ce33-4cfa-af52-07f99e5650eb

Noyce, J.O., Michels, H. and Keevil, C.W. (2006) Use of copper cast alloys to control Escherichia coli O157 cross-contamination during food processing. Applied and Environmental Microbiology, 72 (6), 4239-4244. (doi:10.1128/AEM.02532-05).

Record type: Article

Abstract

The most notable method of infection from Escherichia coli O157 (E. coli O157) is through contaminated food
products, usually ground beef. The objective of this study was to evaluate seven cast copper alloys (61 to 95%
Cu) for their ability to reduce the viability of E. coli O157, mixed with or without ground beef juice, and to
compare these results to those for stainless steel. E. coli O157 (NCTC 12900) (2 107 CFU) mixed with
extracted beef juice (25%) was inoculated onto coupons of each copper cast alloy or stainless steel and
incubated at either 22°C or 4°C for up to 6 h. E. coli O157 viability was determined by plate counts in addition
to staining in situ with the respiratory indicator fluorochrome 5-cyano-2,3-ditolyl tetrazolium. Without beef
extract, three alloys completely killed the inoculum during the 6-h exposure at 22°C. At 4°C, only the
high-copper alloys (>85%) significantly reduced the numbers of O157. With beef juice, only one alloy (95% Cu)
completely killed the inoculum at 22°C. For stainless steel, no significant reduction in cell numbers occurred.
At 4°C, only alloys C83300 (93% Cu) and C87300 (95% Cu) significantly reduced the numbers of E. coli O157,
with 1.5 and 5 log kills, respectively. Reducing the inoculum to 103 CFU resulted in a complete kill for all seven
cast copper alloys in 20 min or less at 22°C. These results clearly demonstrate the antimicrobial properties of
cast copper alloys with regard to E. coli O157, and consequently these alloys have the potential to aid in food
safety.

This record has no associated files available for download.

More information

Submitted date: 27 October 2005
Published date: June 2006

Identifiers

Local EPrints ID: 30161
URI: http://eprints.soton.ac.uk/id/eprint/30161
ISSN: 0099-2240
PURE UUID: 2921b934-3d48-496f-818f-e821ddd01374
ORCID for C.W. Keevil: ORCID iD orcid.org/0000-0003-1917-7706

Catalogue record

Date deposited: 11 May 2006
Last modified: 16 Mar 2024 03:24

Export record

Altmetrics

Contributors

Author: J.O. Noyce
Author: H. Michels
Author: C.W. Keevil ORCID iD

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×