The University of Southampton
University of Southampton Institutional Repository

The effect of plastic deformation on the thermoelastic constant and the potential to evaluate residual stress

The effect of plastic deformation on the thermoelastic constant and the potential to evaluate residual stress
The effect of plastic deformation on the thermoelastic constant and the potential to evaluate residual stress
In some metals it has been shown that the introduction of plastic deformation or strain modifies the thermoelastic constant, K. If it was possible to define the magnitude of the change in thermoelastic constant over a range of plastic strain, then the plastic strain that a material has experienced could be established based on a measured change in the thermoelastic constant. This variation of the thermoelastic constant and the ability to estimate the plastic strain that has been experienced, has potential to form the basis of a novel non-destructive, non-contact, full-field technique for residual stress assessment using thermoelastic stress analysis (TSA). Recent research has suggested that the change in thermoelastic constant is related to the material dislocation that occurs during strain hardening, and thus the change in K for a material that does not strain harden would be significantly less than for a material that does. In the work described in this paper, the change in thermoelastic constant for three materials (316L stainless steel, AA2024 and AA7085) with different strain hardening characteristics is investigated. As the change in thermoelastic response due to plastic strain is small, and metallic specimens require a paint coating for TSA, the effects of the paint coating and other test factors on the thermoelastic response have been considered
978-3-03785-202-6
1660-9336
458-463
Trans Tech Publications
Robinson, A.F.
88cd470c-4c0e-4d31-a56b-a23609518813
Dulieu-Barton, J.M.
9e35bebb-2185-4d16-a1bc-bb8f20e06632
Quinn, S.
0805cab8-0ef5-4f65-9ed6-25fd5563d1a6
Burguete, R.L.
1fd6577f-2899-4206-a4f3-6d06d97b99b1
Burguete, R.L.
Lucas, M.
Patterson, E.A.
Quinn, S.
Robinson, A.F.
88cd470c-4c0e-4d31-a56b-a23609518813
Dulieu-Barton, J.M.
9e35bebb-2185-4d16-a1bc-bb8f20e06632
Quinn, S.
0805cab8-0ef5-4f65-9ed6-25fd5563d1a6
Burguete, R.L.
1fd6577f-2899-4206-a4f3-6d06d97b99b1
Burguete, R.L.
Lucas, M.
Patterson, E.A.
Quinn, S.

Robinson, A.F., Dulieu-Barton, J.M., Quinn, S. and Burguete, R.L. (2011) The effect of plastic deformation on the thermoelastic constant and the potential to evaluate residual stress. Burguete, R.L., Lucas, M., Patterson, E.A. and Quinn, S. (eds.) In Advances in Experimental Mechanics VIII. vol. 70, Trans Tech Publications. pp. 458-463 . (doi:10.4028/www.scientific.net/AMM.70.458).

Record type: Conference or Workshop Item (Paper)

Abstract

In some metals it has been shown that the introduction of plastic deformation or strain modifies the thermoelastic constant, K. If it was possible to define the magnitude of the change in thermoelastic constant over a range of plastic strain, then the plastic strain that a material has experienced could be established based on a measured change in the thermoelastic constant. This variation of the thermoelastic constant and the ability to estimate the plastic strain that has been experienced, has potential to form the basis of a novel non-destructive, non-contact, full-field technique for residual stress assessment using thermoelastic stress analysis (TSA). Recent research has suggested that the change in thermoelastic constant is related to the material dislocation that occurs during strain hardening, and thus the change in K for a material that does not strain harden would be significantly less than for a material that does. In the work described in this paper, the change in thermoelastic constant for three materials (316L stainless steel, AA2024 and AA7085) with different strain hardening characteristics is investigated. As the change in thermoelastic response due to plastic strain is small, and metallic specimens require a paint coating for TSA, the effects of the paint coating and other test factors on the thermoelastic response have been considered

This record has no associated files available for download.

More information

Published date: August 2011
Venue - Dates: 8th International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation, 2011-09-07 - 2011-09-09
Organisations: Engineering Science Unit

Identifiers

Local EPrints ID: 338764
URI: http://eprints.soton.ac.uk/id/eprint/338764
ISBN: 978-3-03785-202-6
ISSN: 1660-9336
PURE UUID: b4eec5e6-45bd-4022-ab3d-7987a8c5f930
ORCID for S. Quinn: ORCID iD orcid.org/0000-0002-9727-5080

Catalogue record

Date deposited: 17 May 2012 10:37
Last modified: 14 Mar 2024 11:04

Export record

Altmetrics

Contributors

Author: A.F. Robinson
Author: S. Quinn ORCID iD
Author: R.L. Burguete
Editor: R.L. Burguete
Editor: M. Lucas
Editor: E.A. Patterson
Editor: S. Quinn

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×