The University of Southampton
University of Southampton Institutional Repository

Sensors for thermal conductivity at high temperatures

Sensors for thermal conductivity at high temperatures
Sensors for thermal conductivity at high temperatures
This thesis describes research undertaken to improve a technique for the measurement of the thermal conductivity of molten materials. The research follows on from the work of previous researchers who designed and tested an instrument for the measurements of the thermal conductivity of molten metals up to 750 K. The previously used transient hot-wire technique, which consisted of the experimental measurement of the voltage response of a sensor and a subsequent inverse Unite element analysis, has been significantly upgraded.

The experimental part of the technique has been improved by the introduction of a new design of the sensor for the measurement of the thermal conductivity. Both the new and the original designs have been used to investigate the same material samples in order to demonstrate the robustness and repeatability of the experimental technique. Additionally, the finite element analysis employed has also undergone various major improvements and resulted in a new finite element model which not only represents the true geometry of the experimental device but also employs a more accurate solution of the transient, conductive heat transfer.

The significant upgrade of the technique and the availability of two different sensor designs have helped to uncover systematic errors which could not have been previously identified and may have resulted in deviations of the measured thermal conductivity. Five original sensors and five sensors with the new design have been used to investigate the thermal conductivity of molten indium, tin and lead at various temperatures up to 750 K. The results have been compared to previously published data and the discrepancies have been discussed and explained. Each metal has been measured using at least two sensors and the consistency of the measured data has also been verified by using two different samples of pure tin. Besides the pure metals, the thermal conductivity of several metal alloys currently used in industry has been investigated within the same temperature range. The overall uncertainty of the measurements of the thermal conductivity is estimated to be ±3 %.
Bilek, Jaromir
44c35320-4330-4f07-9ec8-2d180390116f
Bilek, Jaromir
44c35320-4330-4f07-9ec8-2d180390116f

Bilek, Jaromir (2006) Sensors for thermal conductivity at high temperatures. University of Southampton, School of Engineering, Doctoral Thesis, 191pp.

Record type: Thesis (Doctoral)

Abstract

This thesis describes research undertaken to improve a technique for the measurement of the thermal conductivity of molten materials. The research follows on from the work of previous researchers who designed and tested an instrument for the measurements of the thermal conductivity of molten metals up to 750 K. The previously used transient hot-wire technique, which consisted of the experimental measurement of the voltage response of a sensor and a subsequent inverse Unite element analysis, has been significantly upgraded.

The experimental part of the technique has been improved by the introduction of a new design of the sensor for the measurement of the thermal conductivity. Both the new and the original designs have been used to investigate the same material samples in order to demonstrate the robustness and repeatability of the experimental technique. Additionally, the finite element analysis employed has also undergone various major improvements and resulted in a new finite element model which not only represents the true geometry of the experimental device but also employs a more accurate solution of the transient, conductive heat transfer.

The significant upgrade of the technique and the availability of two different sensor designs have helped to uncover systematic errors which could not have been previously identified and may have resulted in deviations of the measured thermal conductivity. Five original sensors and five sensors with the new design have been used to investigate the thermal conductivity of molten indium, tin and lead at various temperatures up to 750 K. The results have been compared to previously published data and the discrepancies have been discussed and explained. Each metal has been measured using at least two sensors and the consistency of the measured data has also been verified by using two different samples of pure tin. Besides the pure metals, the thermal conductivity of several metal alloys currently used in industry has been investigated within the same temperature range. The overall uncertainty of the measurements of the thermal conductivity is estimated to be ±3 %.

Text
47126-01.pdf - Other
Restricted to Repository staff only

More information

Published date: June 2006
Organisations: University of Southampton

Identifiers

Local EPrints ID: 47126
URI: http://eprints.soton.ac.uk/id/eprint/47126
PURE UUID: 58930186-d3c4-41ad-999e-f9e6f157dad7

Catalogue record

Date deposited: 13 Aug 2007
Last modified: 15 Mar 2024 09:31

Export record

Contributors

Author: Jaromir Bilek

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×