Items where Division is "Faculty of Engineering and the Environment > Engineering Sciences > Engineering Materials Surface Engineering" and Year is 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
[tool] Add To Shelf...
Group by: No Grouping | Authors/Creators | Item Type
Number of items: 39.

Thomsen, O.T. (ed.) (2011) Dedication of special issue of JSSM to the life of Professor Vitaly R. Skvortsov. Journal of Sandwich Structures and Materials, 13, (6), 639-640. (doi:10.1177/1099636211426130).

Achintha, Mithila and Nowell, David (2011) Eigenstrain modelling of residual stresses generated by arrays of LSP shots. Procedia Engineering, 10, 1327-1332. (doi:10.1016/j.proeng.2011.04.221).

Ahmad, E.A., Liborio, L., Kramer, D., Mallia, G., Kucernak, A.R. and Harrison, N.M. (2011) Thermodynamic stability of LaMnO3 and its competing oxides: A hybrid density functional study of an alkaline fuel cell catalyst. Physical Review B, 84, (8), 085137. (doi:10.1103/PhysRevB.84.085137).

Alhajeri, Saleh N., Kawasaki, Megumi, Gao, Nong and Langdon, Terence G. (2011) The evolution of homogenity during processing aluminium alloys by HPT. In, Wang, Jing Tao, Figueiredo, Roberto B. and Langdon, Terence G. (eds.) Nanomaterials by Severe Plastic Deformation: NanoSPD5. Zurich, Switzerland, Trans Tech, 277-282. (Materials Science Forum, 667-669). (doi:10.4028/

An, X.H., Lin, Y., Wu, S.D., Zhang, Z.F., Figueiredo, R.B., Gao, N. and Langdon, T.G. (2011) Significance of stacking fault energy on microstructural evolution in Cu and Cu-Al alloys processed by high-pressure torsion. Philosophical Magazine, 91, (25), 3307-3326. (doi:10.1080/14786435.2011.577757).

Bao, D., Rajab, K.Z., Hao, Y., Kallos, E., Tang, W.X., Argyropoulos, C., Piao, Y.Z. and Yang, Shoufeng (2011) All-dielectric invisibility cloaks made of BaTiO3-loaded polyurethane foam. New Journal of Physics, 13 (doi:10.1088/1367-2630/13/10/103023).

Chen, Yulong, Evans, Julian RG and Yang, Shoufeng (2011) A rapid-doping method for high-throughput discovery applied to thick- film PTCR materials. Journal of the American Ceramic Society, 94, (11), 3748-3756. (doi:10.1111/j.1551-2916.2011.04667.x).

Chen, Yulong and Yang, Shoufeng (2011) PTCR effect in donor doped barium titanate: review of compositions, microstructures, processing and properties. Advances in Applied Ceramics, 110, (5), 257-269. (doi:10.1179/1743676111Y.0000000001).

Commin, Loreleï, Dumont, Myriam, Rotinat, René, Pierron, Fabrice, Masse, Jean-Eric and Barrallier, Laurent (2011) Texture evolution in Nd:YAG-laser welds of AZ31 magnesium alloy hot rolled sheets and its influence on mechanical properties. Materials Science and Engineering A, 528, (4-5), 2049-2055. (doi:10.1016/j.msea.2010.11.061).

Connesson, N., Maquin, F. and Pierron, F. (2011) Dissipated energy measurements as a marker of microstructural evolution: 316L and DP600. Acta Materialia, 59, (10), 4100-4115. (doi:10.1016/j.actamat.2011.03.034).

Connesson, N., Maquin, F. and Pierron, F. (2011) Experimental energy balance during the first cycles of cyclically loaded specimens under the conventional yield stress. Experimental Mechanics, 51, (1), 23-44. (doi:10.1007/s11340-010-9336-4).

Duan, Zhi Chao and Langdon, Terence G. (2011) Effect of special ECAP die configuration on microhardness distribution in pure aluminium. Materials Science Forum, 667-669, 69-74. (doi:10.4028/

Fang, Liping, Parel, Thomas, Danos, Lefteris and Markvart, Tom (2011) Modelling the performance of fluorescent solar collectors. In, 7th Photovoltaic Science, Applications and Technology Conference C93 (PVSAT-7), Edinburgh, GB, 06 - 08 Apr 2011. 4pp, 165-168.

Frostig, Y. and Thomsen, O.T. (2011) Geometrically nonlinear thermomechanical response of circular sandwich plates with a compliant core. Journal of Mechanics of Materials and Structures, 6, (6), 925-948. (doi:10.2140/jomms.2011.6.925).

Frostig, Y. and Thomsen, O.T. (2011) Non-linear thermo-mechanical behaviour of delaminated curved sandwich panels with a compliant core. International Journal of Solids and Structures, 48, (14-15), 2218-2237. (doi:10.1016/j.ijsolstr.2011.03.027).

Ghosh, , K.S. and Gao, N. (2011) Determination of kinetic parameters from calorimetric study of solid state reactions in 7150 Al-Zn-Mg alloy. Transactions of Nonferrous Metals Society of China, 21, (6), 1199-1209. (doi:10.1016/S1003-6326(11)60843-1).

Kawasaki, Megumi, Figueiredo, Roberto B. and Langdon, Terence G. (2011) An investigation of hardness homogeneity throughout disks processed by high-pressure torsion. Acta Materialia, 59, (1), 308-316. (doi:10.1016/j.actamat.2010.09.034).

Kim, J-H, Nunio, F., Pierron, F. and Vedrine, P. (2011) Characterizing elastic properties of superconducting windings by simulations and experiments. Superconductor Science and Technology, 24, (12), 125001-[16pp]. (doi:10.1088/0953-2048/24/12/125001).

Kimiaeifar, A., Lund, E., Thomsen, O.T. and Sørensen, J.D. (2011) Application of the homotopy analysis method to determine the analytical limit state functions and reliability index for large deflection of a cantilever beam subjected to static co-planar loading. Computers & Mathematics with Applications, 62, (12), 4646-4655. (doi:10.1016/j.camwa.2011.10.050).

Kimiaeifar, A., Thomsen, O.T. and Lund, E. (2011) Evaluation of closed-form solutions based on the HPM and HAM approaches for the steady flow of third grade fluids in a porous half space. IMA Journal of Applied Mathematics, 76, (2), 326-339. (doi:10.1093/imamat/hxq042).

Lada, Maria, Starink, Marco J., Carrasco, Miguel, Chen, Lichun, Miskiewicz, Pawel, Brookes, Paul, Obarowska, Margaret and Smith, David C. (2011) Morphology control via dual solvent crystallization for high-mobility functionalized pentacene-blend thin film transistors. Journal of Materials Chemistry, 21, (30), 11232-11238. (doi:10.1039/C1JM11119A).

Li, Jingzhong, Zhang, Nianxian, Ding , Hua and Li, Yinglong (2011) The effect of temperature on microstructure and hardness of AZ80 Mg alloy during equal channel angualr pressing. Journal of Plasticity Engineering, 20-24. (doi:10.3969/j.issn.1007-2012.2011.03.006).

Li, X.M. and Starink, M.J. (2011) Identification and analysis of intermetallic phases in overaged Zr-containing and Cr-containing Al-Zn-Mg-Cu alloys. Journal of Alloys and Compounds, 509, (12), 471-476. (doi:10.1016/j.jallcom.2010.09.064).

Liu, Hong, Leray, Dimitri, Pons, Patrick, Broue, Adrien and Martegoutte, Julien (2011) Validation of finite element structural simulation for ohmic microcontact. Procedia Engineering, 25, 419-422. (doi:10.1016/j.proeng.2011.12.104).

Mbuya, Thomas O., Sinclair, Ian, Moffat, Andrew J. and Reed, Philippa A.S. (2011) Analysis of fatigue crack initiation and S-N response of model cast aluminium piston alloys. Materials Science & Engineering: A , 528, (24), 7331-7340. (doi:10.1016/j.msea.2011.06.007).

Morgeneyer, T.F., Helfen, L., Sinclair, I., Proudhon, H., Xu, F. and Baumbach, T. (2011) Ductile crack initiation and propagation assessed via in situ synchrotron radiation-computed laminography. Scripta Materialia, 65, (11), 1010-1013. (doi:10.1016/j.scriptamat.2011.09.005).

Moulart, R., Pierron, F., Hallett, S. R. and Wisnom, M. R. (2011) Full-field strain measurement and identification of composites moduli at high strain rate with the virtual fields method. Experimental Mechanics, 51, (4), 509-536. (doi:10.1007/s11340-010-9433-4).

Pierron, F., Sutton, M. A. and Tiwari, V. (2011) Ultra high speed DIC and virtual fields method analysis of a three point bending impact test on an aluminium bar. Experimental Mechanics, 51, (4), 537-563. (doi:10.1007/s11340-010-9402-y).

Santiuste, C., Thomsen, O.T. and Frostig, Y. (2011) Thermo-mechanical load interactions in foam cored axi-symmetric sandwich circular plates – high-order and FE models. Composite Structures, 93, (2), 369-376. (doi:10.1016/j.compstruct.2010.09.005).

Schoettle, C, Reed, P.A.S., Sinclair, I. and Starink, M.J. (2011) Lifing predictions for Nickel based superalloys exhibiting sustained macroscopic deflected fatigue crack. In, 8th International Charles Parsons Turbine Conference , Portsmouth, UK, 05 - 08 Sep 2011. 6pp.

Scott, A.E., Hepples, W., Kalantzis, N., Wright, P., Mavrogordato, M.N., Sinclair, I. and Spearing, S.M. (2011) High resolution damage detection of loaded carbon/epoxy laminates using synchrotron radiation computed tomography. In, 18th International Conference on Composite Materials (ICCM-18) , Cheju, KR, 21 - 26 Aug 2011.

Soady, K.A., Mellor, B.G., Shackleton, J., Morris, A. and Reed, P.A.S. (2011) The effect of shot peening on notched low cycle fatigue. Materials Science and Engineering A, 528, 8579-8588. (doi:10.1016/j.msea.2011.08.003).

Starink, M.J. (2011) A model for co-clusters and their strengthening in Al-Cu-Mg based alloys. Thermec 2011, Quebec, CA, 31 Jul - 05 Aug 2011.

Starink, M.J. (2011) The thermodynamics of and strengthening due to co-clusters in ternary Al alloys: 2xxx and 6xxx alloys. European Conference on Aluminium Alloys, Bremen, DE, 05 - 07 Oct 2011.

Thomsen, O.T. and Charca, S. (2011) Assessment of the interface shear strength of metal-polymer system based on the single filament fragmentation test method. Applied Mechanics and Materials, 70, 446-451. (doi:10.4028/

Wu, Ai Hui, Syngellakis, Stavros and Mellor, B.G. (2011) Effect of thermal input on finite element predictions of welding residual stresses. Advanced Materials Research, 399-401, 1976-1983. (doi:10.4028/

Xu, Y. and Mellor, B.G. (2011) Characterization of acoustic emission signals from particulate filled thermoset and thermoplastic polymeric coatings in four point bend tests. Materials Letters, 65, (23-24), 3609-3611. (doi:10.1016/j.matlet.2011.08.012).

Zhang, Nianxian, Ding, Hua, Li, Jizhong, Wu, Xiaolin, Li , Yinglong and Xia, Kenong (2011) Microstructure and mechanical properties of ultra-fine grain AZ80 alloy processed by back pressure equal channel angular pressing. [in special issue: Nanomaterials by Severe Plastic Deformation: NanoSPDS] Materials Science Forum, 667-669, 547-552. (doi:10.4028/

Zhang, Yue, Figueiredo, Roberto B., Alhajeri, Saleh N., Wang, Jing Tao, Gao, Nong and Langdon, Terence G. (2011) Structure and mechanical properties of commercial purity titanium processed by ECAP at room temperature. Materials Science and Engineering A, 528, (25-26), 7708-7714. (doi:10.1016/j.msea.2011.06.054).

This list was generated on Tue Feb 9 02:39:20 2016 GMT.