Items where Division is "Faculty of Engineering and the Environment > Engineering Sciences > Engineering Materials Surface Engineering" and Year is 2012
 | Up a level |
A
Ahmad, E.A., Mallia, G., Kramer, D., Tileli, V., Kucernak, A.R. and Harrison, N.M. (2012) Comment on "2D Atomic Mapping of Oxidation States in Transition Metal Oxides by Scanning Transmission Electron Microscopy and Electron Energy-Loss Spectroscopy". Physical Review Letters, 108, (25), 259701-[2pp]. (doi:10.1103/PhysRevLett.108.259701).
Al-Hajjaj, A.A., Zamora, B., Bavykin, D.V., Shah, A.A., Walsh, F.C. and Reguera, E. (2012) Sorption of hydrogen onto titanate nanotubes decorated with a nanostructured Cd3[Fe(CN)6]2 Prussian Blue analogue. International Journal of Hydrogen Energy, 37, (1), 318-326. (doi:10.1016/j.ijhydene.2011.09.094).
An, X.H, Wu, S.D, Zhang, Z. F, Figueiredo, R.B., Gao, N. and Langdon, T.G. (2012) Enhanced strength–ductility synergy in nanostructured Cu and Cu–Al alloys processed by high-pressure torsion and subsequent annealing. Scripta Materialia, 66, (5), 227-230. (doi:10.1016/j.scriptamat.2011.10.043).
B
Bavykin, Dmitry V., Stuchinskaya , Tanya L., Danos, Lefteris and Russell, David A. (2012) Emission wavelength tuning in rare earth fluoride upconverting nanoparticles decorated with dye coated titanate nanotubes. Langmuir, 28, (50), 17419-17425. (doi:10.1021/la304043d).
C
Cao, Y., Wang, Y.B., Liao, X.Z., Kawasaki, M., Ringer, S.P., Langdon, T.G. and Zhu, Y.T. (2012) Applied stress controls the production of nano-twins in coarse-grained metals. Applied Physics Letters, 101, (23), 231903-1. (doi:10.1063/1.4769216).
Chen, Y.J, Li, Y.J, Walmsley, J.C, Gao, N., Roven, H.J, Starink, M.J. and Langdon, T.G. (2012) Microstructural heterogeneity in hexagonal close-packed pure Ti processed by high-pressure torsion. Journal of Materials Science, 47, (12), 4838-4844. (doi:10.1007/s10853-012-6343-0).
Chinh, N.Q., Csanádi, T., Gubicza, J., Lendvai, J. and Langdon, T.G. (2012) Possible self-Organized criticality in the Portevin-Le Chatelier effect during decomposition of solid solution alloys. Materials Research Society Communications, 2, 1-4. (doi:10.1557/mrc.2011.25).
Chinh, N.Q., Csanádi, T., Györi, T., Valiev, R.Z., Straumal, B.B., Kawasaki, M. and Langdon, T.G. (2012) Strain rate sensitivity studies in an ultrafine-grained Al-30wt.%Zn alloy using micro- and nano-indentation. Materials Science and Engineering A, 543, 117-120. (http://dx.doi.org/10.1016/j.msea.2012.02.056).
Chinh, N.Q., Győri, T., Valiev, R.Z., Szommer, P., Varga, G., Havancsák, K. and Langdon, T.G. (2012) Observations of unique plastic behavior in micro-pillars of an ultrafine-grained alloy. MRS Communications, 2, (3), 75-78. (doi:10.1557/mrc.2012.11).
Commin , Lorelei, Dumont, M., Rotinat , R., Pierron, F., Masse, J.-E. and Barrallier, L. (2012) Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds. Materials Science and Engineering A, 551, 288-292. (doi:10.1016/j.msea.2012.05.021).
Crump, D.A. and Dulieu-Barton, J.M. (2012) Assessment of non-adiabatic behaviour in thermoelastic stress analysis of composite sandwich panels. Experimental Mechanics, 52, 829-842. (doi:10.1007/s11340-012-9601-9).
Crump, Jennifer, Qiao, Xiao Guang and Starink, Marco J. (2012) The effect of high-pressure torsion on the behaviour of intermetallic particles present in Al–1Mg and Al–3Mg. Journal of Materials Science, 47, (4), 1751-1757. (doi:10.1007/s10853-011-5955-0 ).
Csanádi, T., Chinh, N.Q., Gubicza, J. and Langdon, T.G. (2012) Macroscopic and microscopic descriptions of the plastic deformation of Fcc metals over a wide range [-4pt] of strain and temperature. Acta Physica Polonica A, 122, (3), 630-633.
D
Danos, Lefteris, Parel, Thomas and Markvart, Tomas et al. (2012) Increased efficiencies on CdTe solar cells via luminescence down-shifting with excitation energy transfer between dyes. Solar Energy Materials and Solar Cells, 98, 486-490. (doi:10.1016/j.solmat.2011.11.009).
Devivier, Cédric, Pierron, F. and Wisnom, Michael (2012) Damage detection in composite materials using full-field slope measurements. Composites Part A Applied Science and Manufacturing, 43, (10), 1650-1666. (doi:10.1016/j.compositesa.2011.11.009).
F
Fang, L., Parel, T. S., Danos, L. and Markvart, T. (2012) Photon reabsorption in fluorescent solar collectors. Journal of Applied Physics, 111, (7), 076104-1-076104-3. (doi:10.1063/1.3702815).
Figueiredo, Roberto B., Aguilar, Maria T.P., Cetlin, Paulo R. and Langdon, Terence G. (2012) Analysis of plastic flow during high-pressure torsion. Journal of Materials Science, 47, (22), 7807-7814. (doi:10.1007/s10853-012-6506-z).
Figueiredo, Roberto B., Kawasaki, Megumi and Langdon, Terence G. (2012) An evaluation of homogeneity and heterogeneity in metals processed by high-pressure torsion. Acta Physica Polonica A, 422, 425-429.
Figueiredo, Roberto B. and Langdon, Terence G. (2012) Fabricating ultrafine-grained materials through the application of severe plastic deformation: a review of developments in Brazil. Journal of Materials Research and Technology, 1, 55-62.
Figueiredo, Roberto B. and Langdon, Terence G. (2012) Influence of rolling direction on flow and cavitation in a superplastic magnesium alloy processed by equal-channel angular pressing. Materials Science and Engineering A, 556, 211-220. (doi:10.1016/j.msea.2012.06.079).
Figueiredo, Roberto B., Pereira, Pedro Henrique R., Aguilar, Maria Teresa P., Cetlin, Paulo R. and Langdon, Terence G. (2012) Using finite element modelling to examine the temperature distribution in quasi-constrained high-pressure torsion. Acta Materialia, 60, (6-7), 3190-3198. (doi:10.1016/j.actamat.2012.02.027).
Fragaki, Aikaterini and Markvart, Tom (2012) System memory effects in the sizing of stand-alone PV systems. Progress in Photovoltaics Research and Applications (doi:10.1002/pip.2160).
G
Gao, Nong, Wang, Chuan Ting, Wood, Robert J.K. and Langdon, Terence G. (2012) Tribological properties of ultrafine-grained materials processed by severe plastic deformation. Journal of Materials Science, 47, (12), 4779-4797. (doi:10.1007/s10853-011-6231-z).
Ghosh, K.S., Gao, N. and Starink, M.J. (2012) Characterization of high pressure torsion processed 7150 Al-Zn-Mg-Cu alloy. Materials Science and Engineering A, 552, 164-171. (doi:10.1016/j.msea.2012.05.026).
H
Hegedűs, Z., Gubicza, J., Kawasaki, M., Chinh, N.Q., Fogarassy, Z. and Langdon, T.G. (2012) Microstructure of low stacking fault energy silver processed by different routes of severe plastic deformation. Journal of Alloys and Compounds, 536, supplement 1 , S190-S193. (doi:10.1016/j.jallcom.2011.10.070).
Helfen, Lukas, Morgeneyer, Thilo F., Xu, Feng, Mavrogordato, Mark N., Sinclair, Ian, Schillinger, Burkhard and Baumbach, Tilo (2012) Synchrotron and neutron laminography for three-dimensional imaging of devices and flat material specimens. International Journal of Materials Research, 2012, (2), 170-173. (doi:10.3139/146.110668).
Huang, Yi, Figueiredo, Roberto B., Baudin, Thierry, Brisset, François and Langdon, Terence G. (2012) Evolution of strength and homogenity in a magnesium alloy processed by high-pressure torsion at different temperatures. Advanced Engineering Materials, 14, 1018-1026. (doi:10.1002/adem.201200016).
Huang, Yi, Figueiredo, Roberto B., Baudin, Thierry, Helbert, Anne-Laure, Brisset, François and Langdon, Terence G. (2012) Effect of temperature on the processing of a magnesium alloy by high-pressure torsion. Journal of Materials Science, 47, 7796-7806. (doi:10.1007/s10853-012-6578-9).
Huang, Yi, Figueiredo, Roberto B. and Langdon, Tenerence G. (2012) Effect of HPT processing temperature on strength of a Mg-Al-Zn alloy. Reviews on Advanced Materials Science, 31, 129-137.
K
Kawasaki, Megumi, Figueiredo, Roberto B. and Langdon, Terence G. (2012) Twenty-five years of severe plastic deformation: recent developments in evaluating the degree of homogeneity through the thickness of disks processed by high-pressure torsion. Journal of Materials Science, 47, (22), 7719-7725. (doi:10.1007/s10853-012-6507-y).
Kawasaki, Megumi and Langdon, Terence G. (2012) Using deformation mechanism maps to depict flow processes in superplastic ultrafine-grained materials. Journal of Materials Science, 47, (22), 7726-7734. (doi:10.1007/s10853-012-6487-y).
Khoo, Jiyi and Yang, Shoufeng (2012) A drop-on-demand printer for dry powder dispensing. In, Wigglesworth, Mark and Wood, Terry (eds.) Management of Chemical and Biological Samples for Screening Applications. Singapore, SG, Wiley VCH.
Kimiaeifar, A., Toft, H., Lund, E., Thomsen, O.T. and Sørensen, J.D. (2012) Reliability analysis of adhesive bonded scarf joints. Engineering Structures, 35, 281-287. (doi:10.1016/j.engstruct.2011.11.013).
Korznikova, E.A., Mironov, S. Yu, Korznikov, A.V., Zhilyaev, A.P. and Langdon, T.G. (2012) Microstructural evolution and electro-resistivity in HPT nickel. Materials Science and Engineering A, 556, 437-445. (doi:10.1016/j.msea.2012.07.010).
L
Langdon, Terence G. (2012) The current status of bilk nanostructured materials. Reviews on Advanced Materials Science, 31, 1-4.
Leong, Martin, Overgaard, Lars C.T., Daniel, Isaac M., Lund, Erik and Thomsen, Ole T. (2012) Interlaminar/interfiber failure of unidirectional glass fiber reinforced composites used for wind turbine blades. Journal of Composite Materials, 1-16. (doi:10.1177/0021998312440132).
Leong, Martin, Overgaard, Lars C.T., Thomsen, Ole T., Lund, Erik and Daniel, Isaac M. (2012) Investigation of failure mechanisms in GFRP sandwich structures with face sheet wrinkle defects used for wind turbine blades. Composite Structures, 94, (2), 768-778. (doi:10.1016/j.compstruct.2011.09.012).
Li, X.M. and Starink, M.J. (2012) DSC study on phase transitions and their correlation with properties of overaged Al-Zn-Mg-Cu alloys. Journal of Materials Engineering and Performance, 21, 977-984. (doi:10.1007/s11665-011-9973-5).
Li, Zongqi and Yang, Shoufeng (2012) Nanobiomaterials library synthesis for high-throughput screening using a dry powder printing method. Nano LIFE, 2, (1) (doi:10.1142/S1793984411000402).
Loucif, A., Figueiredo, R.B., Kawasaki, M., Baudin, T., Brisset, F., Chemam, R. and Langdon, T.G. (2012) Effect of aging on microstructural development in an Al–Mg–Si alloy processed by high-pressure torsion. Journal of Materials Science, 47, (22 ), 7815-7820. (doi:10.1007/s10853-012-6400-8).
Loucif, Aicha, Baudin, Thierry, Brisset, François, Figueiredo, Roberto B., Chemam, Rafik and Langdon, Terence G. (2012) An investigation of microtexture evolution in an AlMgSi alloy processed by high-pressure torsion. Materials Science Forum, 702-703, 165-168. (doi:10.4028/www.scientific.net/MSF.702-703.165).
Lu, C.-H., Maddox, B.R., Remington, B.A., Brigna, E.M., Kawasaki, M., Langdon, T.G., Park, H.-G., Kad, B. and Meyers, M.A. (2012) Laser compression of nanocrystalline tantalum. AIP Conference Proceedings, 1426, 1387-1390. (doi:10.1063/1.3686540).
Lu, Xuesong, Chen, Lifeng, Amini, Negar, Yang, Shoufeng, Evans, J.R.G. and Guo, Z.X. (2012) Novel methods to fabricate macroporous 3D carbon scaffolds and ordered surface mesopores on carbon filaments. Journal of Porous Materials, 19, (5), 529-536. (doi:10.1007/s10934-011-9501-x).
M
Maletta, C., Furgiuele, F., Sgambitterra, E., Callisti, M., Mellor, B.G. and Wood, R.J.K. (2012) Indentation response of a NiTi shape memory alloy: modeling and experiments. Frattura ed Integrita Strutturale, 21, 5-12. (doi:10.3221/IGF-ESIS.21.01).
Markvart, T., Danos, L., Alderman, N., Fang, L. and Parel, T. (2012) Harvesting sunshine: solar cells, photosynthesis and the thermodynamics of light. 27th European Solar Photovoltaic Conference and Exhibition, Frankfurt am Main, DE, 24 - 28 Sep 2012. 6pp.
Matoso, Mariana S., Figueiredo, Roberto B., Kawasaki, Megumi, Santos, Danoberto and Langdon, Terence G. (2012) Processing a twinning-induced plasticity steel by high-pressure torsion. Scripta Materialia, 67, (7-8), 649-652. (doi:10.1016/j.scriptamat.2012.07.019).
Mbuya, Thomas O., Sinclair, I., Moffatt, A.J. and Reed, P.A.S. (2012) Micromechanisms of fatigue crack growth in cast aluminium piston alloys. International Journal of Fatigue, 42, 227-327. (doi:10.1016/j.ijfatigue.2011.10.015).
N
Ni, S., Wang, Y.B., Liao, X.Z., Figueiredo, R.B., Li, H.Q., Ringer, S.P., Langdon, T.G. and Zhu, Y.T. (2012) The effect of dislocation density on the interactions between dislocations and twin boundaries in nanocrystalline materials. Acta Materialia, 60, (6-7), 3181-3189. (doi:10.1016/j.actamat.2012.02.026).
O
Ovid'ko, I.A. and Langdon , T.G. (2012) Enhanced ductility of nanocrystalline and ultrafine-grained metals. Reviews on Advanced Materials Science, 30, (2), 103-111.
P
Pierron, F. and Forquin, P. (2012) Ultra high speed full-field deformation measurements on concrete spalling specimens and stiffness identification with the Virtual Fields Method. Strain, 28, (5), 388-405. (doi:10.1111/j.1475-1305.2012.00835.x).
Pierron, F. and Grédiac, Michel (2012) The virtual fields method. Extracting constitutive mechanical parameters from full-field deformation measurements, New York, US, Springer-Verlag , 517pp.
Proudhon, Henry, Moffat, A., Sinclair, Ian and Buffiere, Jean-Yves (2012) Three-dimensional characterisation and modelling of small fatigue corner cracks in high strength Al-alloys. [in special issue: Use of large scale facilities for research in metallurgy ] Comptes Rendus Physique, 13, (3), 316-327. (doi:10.1016/j.crhy.2011.12.005).
Q
Qiao, X.G. and Starink, Marco J. (2012) Prediction of hardness of Al alloys processed by accumulative roll bonding. Materials Science and Engineering A, 531, 45-50. (doi:10.1016/j.msea.2011.10.005).
R
Rahmani, O., Khalili, S.M.R. and Thomsen, O.T. (2012) A high-order theory for the analysis of circular cylindrical composite sandwich shells with transversely compliant core subjected to external loads. Composite Structures, 94, (7), 2129-2142. (doi:10.1016/j.compstruct.2012.02.002).
Rossi, Marco and Pierron, Fabrice (2012) Identification of plastic constitutive parameters at large deformations from three dimensional displacement fields. Computational Mechanics, 49, (1), 53-71. (doi:10.1007/s00466-011-0627-0).
Rossi, Marco and Pierron, Fabrice (2012) On the use of simulated experiments in designing tests for material characterization from full-field measurements. International Journal of Solids and Structures, 49, (3-4), 420-435. (doi:10.1016/j.ijsolstr.2011.09.025).
S
Sabbaghianrad, Shima, Kawasaki, Megumi and Langdon, Terence G. (2012) Microstructural evolution and the mechanical properties of an aluminum alloy processed by high-pressure torsion. Journal of Materials Science, 47, (22), 7789-7795. (doi:10.1007/s10853-012-6524-x).
Schoettle, C., Sinclair, I., Starink, M.J. and Reed, P.A.S. (2012) Deflected teardrop cracking in nickel based superalloys: sustained macroscopic deflected fatigue crack growth. International Journal of Fatigue, 44, 188-201. (doi:10.1016/j.ijfatigue.2012.04.017).
Scott, A.E., Sinclair, I. and Spearing, S.M. et al. (2012) Damage accumulation in a carbon/epoxy composite: comparison between a multiscale model and computed tomography experimental results. Composites Part A: Applied Science and Manufacturing, 43, (9), 1514-1522. (doi:10.1016/j.compositesa.2012.03.011).
Sklenicka, V., Dvorak, J., Kral, P., Svoboda, M., Kvapilova, M. and Langdon, T.G. (2012) Factors influencing creep flow and ductility in ultrafine-grained metals. Materials Science and Engineering: A, 558, 403-411. (doi:10.1016/j.msea.2012.08.019).
Sordi, Vitor L., Ferrante, Maurizio, Kawasaki, Megumi and Langdon, Terence G. (2012) Microstructure and tensile strength of grade 2 titanium processed by equal-channel angular pressing and by rolling. Journal of Materials Science, 47, (22), 7870-7876. (doi:10.1007/s10853-012-6593-x).
Starink, M.J., Cao, L.F. and Rometsch, P.A. (2012) A model for the thermodynamics of and strengthening due to co-clusters in Al-Mg-Si based alloys. Acta Materialia, 60, (10), 4194-4207. (doi:10.1016/j.actamat.2012.04.032).
Starink, Marco J. (2012) A model for co-clusters and their strengthening in Al-Cu-Mg based alloys: a comparison with experimental data. International Journal of Materials Research, 8, 942-947.
Sutcliffe, M.P.F., Monroy Acevesa, C., Stronge, W.J., Choudhury, R.S. and Wright, P. (2012) Moderate speed impact damage to 2D-braided glass–carbon composites. Composite Structures, 94, (5), 1781-1792. (doi:10.1016/j.compstruct.2011.12.026).
V
Valiev, Ruslan Z., Sabirov, Ilchat, Zhilyaev, Alexander P and Langdon, Terence G. (2012) Bulk nanostructured metals for innovative applications. JOM, 64, (10), 1134-1142. (doi:10.1007/s11837-012-0427-9).
W
Wang, Chuan Ting, Gao, Nong, Gee, Mark G, Wood, Robert J.K. and Langdon, Terence G. (2012) Effect of grain size on the micro-tribological behavior of pure titanium processed by high-pressure torsion. Wear, 280-281, 28-35. (doi:10.1016/j.wear.2012.01.012).
Wang, J.T., Li, Z., Wang, J. and Langdon, T.G. (2012) Principles of severe plastic deformation using tube high-pressure shearing. Scripta Materialia, 67, (10), 810-813. (doi:10.1016/j.scriptamat.2012.07.028).
Wen, Haiming, Zhao, Yonghao, Topping, Troy D., Ashford, Dustin, Figueiredo, Roberto B., Xu, Cheng, Langdon, Terence G. and Lavernia, Enrique J. (2012) Influence of pressing temperature on microstructure evolution and mechanical behaviour of ultrafine-grained Cu processing by equal-channel angular pressing. Advanced Engineering Materials, 14, (3), 185-194. (doi:10.1002/adem.201100080).
White, Rachel D, Bavykin, Dmitry V. and Walsh, Frank C. (2012) Spontaneous scrolling of kaolinite nanosheets into halloysite nanotubes in an aqueous suspension in the presence of GeO2. The Journal of Physical Chemistry C, 116, 8824-8833. (doi:10.1021/jp300068t).
White, Rachel D., Bavykin, Dmitry V. and Walsh, F.C. (2012) The stability of halloysite nanotubes in acidic and alkaline aqueous suspensions. Nanotechnology, 23, 065705-065715. (doi:10.1088/0957-4484/23/6/065705).
Wongsa-Ngam, Jittraporn, Kawasaki, Megumi and Langdon, Terence G. (2012) Achieving homogeneity in a Cu–Zr alloy processed by high-pressure torsion. Journal of Materials Science, 47, (22), 7782-7788. (doi:10.1007/s10853-012-6587-8).
Wongsa-Ngam, Jittraporn, Kawasaki, Megumi and Langdon, Terence G. (2012) The development of hardness homogeneity in a Cu–Zr alloy processed by equal-channel angular pressing. Materials Science and Engineering A, 556, 526-532. (doi:10.1016/j.msea.2012.07.022).
Z
Zhang, P., An, A.H., Zhang, Z.J., Wu, S.D., Li, S.X., Zhang, Z.F., Figueiredo, R.B., Gao, N. and Langdon, T.G. (2012) Optimizing strength and ductility of Cu-Zn alloys through severe plastic deformation. Scripta Materialia, 67, (11), 871-874. (doi:10.1016/j.scriptamat.2012.07.040).
Zhang, S., Dulieu-Barton, J.M., Fruehmann, R.K. and Thomsen, O.T. (2012) A methodology for obtaining material properties of polymeric foam at elevated temperatures. [in special issue: Sandwich Structures] Experimental Mechanics, 52, (1), 3-15. (doi:10.1007/s11340-011-9519-7).
Zhang, Yiming, Ubic, Rick, Xue, Dongfeng and Yang, Shoufeng (2012) Predicting the structural stability and formability of ABO3-Type perovskite compounds using artificial neural networks. Materials Focus, 1, (1), 57-64. (http://dx.doi.org/10.1166/mat.2012.1009).
Zhilyaev, Alexander P. and Langdon, Terence G. (2012) Microstructure and microtexture evolution in pure metals after ultra-high straining. Journal of Materials Science, 47, (22), 7888-7893. (doi:10.1007/s10853-012-6429-8).
