Browse by Divisions pre August 2011

Abu-Sharkh, S.M. and Barinberg, V. (1998) Design and performance of a new technique for sensorless control of a downhole brushless PM motor. In, Seventh International Conference on Power Electronics and Variable Speed Drives, 1998. Seventh InternationalConference on Power Electronics and Variable Speed Drives (PEVD98) USA, Institute of Electrical and Electronics Engineers, 263-268. (IEE Conference Publication 456).

Abu-Sharkh, S.M. and Barinberg, V. (1998) A new approach to rotor position estimation for a PM brushless motor drive. In, Proceedings of 9th Mediterranean Electrotechnical Conference, 1998. MELECON 98. 9th Mediterranean Electrotechnical Conference, 1998. MELECON 98 USA, Institute of Electrical and Electronics Engineers, 1199-202. (doi:10.1109/MELCON.1998.699424).

Aglietti, G.S., Langley, R.S., Rogers, E. and Gabriel, S.B. (1998) Active control strategies for equipment loaded panels. In, Proceedings of MOVIC '98 - The Fourth International Conference on Motion and Vibration Control. MOVIC '98 - The Fourth International Conference on Motion and Vibration Control Zurich, Switzerland, Institute of Robotics ETH, 515-520.

Aglietti, G.S., Langley, R.S., Rogers, E., Gabriel, S.B. and Stoustrup, J. (1998) Modelling of equipment loaded panels for robust control investigations. In, ISMA23 International Conference on Noise & Vibration Engineering, Leuven, Belgium, 16 - 18 Sep 1998. , 1209-1216.

Aglietti, G.S., Stoustrup, J., Rogers, E., Langley, R.S. and Gabriel, S.B. (1998) LTR control methodologies for microvibrations. In, Proceedings of the 1998 IEEE International Conference on Control Applications. 1998 IEEE International Conference on Control Applications Piscataway, USA, Institute of Electrical and Electronics Engineers, 624-628. (doi:10.1109/CCA.1998.728572).

Alam, M and Sandham, N.D. (1998) Numerical study of separation bubbles with turbulent reattachment followed by a boundary layer relaxation. In, Emerson, D.R., Ecer, A., Periaux, J., Satofuka, N. and Fox, P. (eds.) Parallel Computational Fluid Dynamics. Recent Developments and Advances Using Parallel Computers. Computational Fluid Dynamics '97 Amsterdam, The Netherlands, North Holland, 571-578.

Allen, R. (1998) Subzero. In, Remotely Operated Vehicles of the World: 1998-99 Edition. Ledbury, UK, Oilfield Publications, p.160. (Vessels of the World).

Amaratunga, S., Tutty, O.R. and Roberts, G.T. (1998) Computations of laminar, high enthalpy air flow over a compression ramp. In, Proceedings of Third European Symposium on Aerothermodynamics for Space Vehicles. Third European Symposium on Aerothermodynamics for Space Vehicles Frascati, Italy, European Space Agency. (European Space Agency Special Publication SP-426).

Amaratunga, S.R., Tutty, O.R. and Roberts, G.T. (1998) Numerical predictions of hypersonic flow over a 2-D compression ramp. Journal of Spacecraft and Rockets, 35, (2), 230-232.

Amirhaghi, S., Plappert, E., Bajic, Z., Reehal, H.S., Wood, R.J.K.W. and Wheeler, D.W. (1998) Growth and wear properties of diamond coatings on W and WC substrates. In, Proceedings of Diamond 98 Conference 1998.

Atkinson, John, Cranny, Andy and Simonis de Cloke, Cinzia (1998) A low cost oxygen sensor fabricated as a screen-printed semiconductor device suitable for unheated operation at ambient temperatures. Sensors and Actuators B: Chemical, 47, (1-3), 171-180. (doi:10.1016/S0925-4005(98)00020-3).

Atkinson, John Karl (1998) Thick film chemical sensors. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Avital, E.J., Sandham, N.D. and Luo, K.H. (1998) Mach wave radiation by mixing layers. Part I: analysis of the sound field. Theoretical and Computational Fluid Dynamics, 12, (2), 73-90. (doi:10.1007/s001620050100).

Avital, E.J., Sandham, N.D. and Luo, K.H. (1998) Mach wave radiation by mixing layers. Part II: analysis of the source field. Theoretical and Computational Fluid Dynamics, 12, (2), 91-108. (doi:10.1007/s001620050101).

Bahaj, A.S., Ballard, J.R., James, P.A.B. and Mucci, P.E.R. (1998) A new approach to photovoltaic roof tiles. In, Proceedings of 2nd World Conference and Exhibition on Photovoltaic Solar Energy Conversion, Vienna, Austria, 06 - 10 Jul 1998. , 2690-2693.

Bailey, J.D. and Hill, M. (1998) The use of a hypermedia system to develop confidence in engineering design. International Journal of Mechanical Engineering Education, 26, (2), 111-125.

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (1998) The measurement and prediction of fluid actions experienced by a manoeuvring vessel. In, MAN '98: Symposium on Forces Acting on a Manoeuvring Vessel, Val de Reuil, France, 16 - 18 Sep 1998. , 1M-8M.

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (1998) Theoretical and experimental techniques for predicting seakeeping and manoeuvring ship characteristics. In, RINA International Conference on Ship Motions and Manoeuvrability, Royal Institute of Naval Architects, London, UK, Feb 1998.

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (1998) Theoretical validation of the hydrodynamics of high speed mono- and multi-hull vessels travelling in a seaway. In, Oosterveld, M.C.W. and Tan, S.G. (eds.) Practical Design of Ships and Mobile Units. Proceedings of the seventh International Symposium on Practical Design of Ships and Mobile Units, The Hague, The Netherlands, September 1998. PRADS '98: Proceedings of the Seventh International Symposium on Practical Design of Ships and Mobile Units Amsterdan, The Netherlands, Elsevier, 567-576. (Developments in Marine Technology 11).

Ball, G.J. and East, R.A. (1998) Blast wave attenuation by an aqueous foam sheet: a Free-Lagrange simulation. In, Houwing, A.F.P. (ed.) Proceedings of the 21st International Symposium on Shock Waves. 21st International Symposium on Shock Waves , Panther, 79-84.

Beduz, C., Cereda, E., Dutoit, B., Friend, C.M., De la Fuente, G.F., Hughes, T., Le Lay, L., Navarro, R., Spiller, D.M., Yang, Y. and Zannella, S. (1998) A series of round-robin measurements of the self-field ac loss of Bi-2223 tapes. Superconductor Science and Technology, 11, (7), 675-679. (doi:10.1088/0953-2048/11/7/010).

Beduz, C. and Scurlock, R.G. (1998) Cryogenic refrigeration below 70k. In, Proceedings of ICEC17, Bournemouth, UK, 14 - 17 Jul 1998. , 17-22.

Benchekchou, B., Coni, M., Howarth, H.V.C. and White, R.G. (1998) Some aspects of vibration damping improvement in composite materials. Composites Part B: Engineering, 29, (6), 809-817. (doi:10.1016/S1359-8368(98)00024-9).

Beshara, M. and Keane, A.J. (1998) Vibration energy flows between plates with compliant and dissipative couplings. Journal of Sound and Vibration, 213, (3), 511-535. (doi:10.1006/jsvi.1998.1521).

Brown, M. and Lewis, H.G. (1998) Support vector machines and linear spectral unmixing for remote sensing. In, Singh, Sameer (ed.) International Conference on Advances in Pattern Recognition: Proceedings of ICAPR 98. International Conference on Advances in Pattern Recognition (ICAPR 98) London, Springer, 395-404.

Calvert, J.R. and Farrar, R.A. (1998) An engineering data book, Southampton, UK, Calvert Technical Press, 88pp.

Chu, F. and Holmes, R. (1998) The effect of squeeze film damper parameters on the unbalance response and stability of a flexible rotor. Journal of Engineering for Gas Turbines and Power, 120, 140-148.

Chu, Fulei and Holmes, Roy (1998) Efficient computation on nonlinear responses of a rotating assembly incorporating the squeeze-film damper. Computer Methods in Applied Mechanics and Engineering, 164, (3-4), 363-373. (doi:10.1016/S0045-7825(98)00097-8).

Ciavarella, M. (1998) Tangential loading of general three-dimensional contacts. Journal of Applied Mechanics, 65, (4), 998-1003.

Ciavarella, M., Demelio, G. and Pappalettere, C. (1998) On the post-processing of data obtained from cracked components. The Journal of Strain Analysis for Engineering Design, 33, (1), 67-71.

Ciavarella, M., Hills, D.A. and Monno, G. (1998) Contact problems for a wedge with rounded apex. International Journal of Mechanical Sciences, 40, (10), 977-988. (doi:10.1016/S0020-7403(97)00141-0).

Ciavarella, M., Hills, D.A. and Monno, G. (1998) The influence of rounded edges on indentation by a flat punch. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 212, (4), 319-327. (doi:10.1243/0954406981521259).

Ciavarella, Michele (1998) The generalized Cattaneo partial slip plane contact problem. I - Theory. International Journal of Solids and Structures, 35, (18), 2349-2362. (doi:10.1016/S0020-7683(97)00154-6).

Ciavarella, Michele (1998) The generalized Cattaneo partial slip plane contact problem. II - Examples. International Journal of Solids Structures, 35, (18), 2363-2378. (doi:10.1016/S0020-7683(97)00155-8).

Clowes, J.R., Syngellakis, S. and Zervas, M.N. (1998) Pressure sensitivity of side-hole optical fibre sensors. IEEE Photonics Technology Letters, 10, (6), 857-859. (doi:10.1109/68.681509).

Cranny, A.W.J. and Atkinson, J.K. (1998) Thick film silver-silver chloride reference electrodes. Measurement Science and Technology, 9, (9), 1557-1565. (doi:10.1088/0957-0233/9/9/027).

Crisan, A., Gordeev, S.N., Manton, S., Rassau, A.P., Popa, S., Beduz, C., De Groot, P.A.J., Gagnon, R. and Taillefer, L. (1998) Investigations of the zero-field (a,b)-plane conductivity of YBa2Cu3O7-d near the critical temperature. Physica C: Superconductivity, 309, (1-2), 1-7. (doi:10.1016/S0921-4534(98)00578-4).

Cunningham, P.R., Xioa, Y. and White, R.G. (1998) The design of advanced aircraft structures to resist acoustic fatigue; work in progress. Strain: An International Journal for Experimental Mechanics, 34, (2), 43-49.

Dargie, Peter, Sion, Russell, Atkinson, John and White, Neil (1998) An investigation of the effect of poling conditions on the characteristics of screen-printed piezoceramics. Microelectronics International, 15, (2), 6-10. (doi:10.1108/13565369810215564).

East, R.A. (1998) Book review. Principles of Gas-Solid Flows, by Liang-Shih Fan and Chao Zhu. Aeronautical Journal, 102, p.406.

El-Beltagy, M.A. and Keane, A.J. (1998) Optimisation for multilevel problems: a comparison of various algorithms. In, Parmee, Ian C. (ed.) Adaptive Computing in Design and Manufacture: the Integration of Evolutionary and Adaptive Computing Technologies with Product/System Design and Realisation. , Springer, 111-120.

Gabriel, S.B., Osborne, J.J., Roberts, G.T. and Chambers, A.R. (1998) Development of a renewable atomic oxygen sensor for low Earth orbit. Journal of Spacecraft and Rockets, 35, (3), 413-415.

Gao, N. and Baker, T.N. (1998) Austenite grain growth behavior of microalloyed Al-V-N and Al-V-Ti-N steels. ISIJ International, 38, (7), 744-751.

Glasspool, Wendy and Atkinson, John (1998) A screen-printed amperometric dissolved oxygen sensor utilising an imobilised electrolyte gel and membrane. Sensors and Actuators B: Chemical, 48, (1-3), 308-17. (doi:10.1016/S0925-4005(98)00063-X).

Glasspool, Wendy Victoria (1998) An investigation of the characteristics of thick film amperometric dissolved oxygen sensors. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Gowlett, D.J., McDonald, P.C., Scurlock, R.G. and Watson, J.H.P. (1998) The effect of energisation current on the calibration of silicon diode thermometers. In, Proceedings of the International Cryogenics Engineering Conference (ICEC17). International Cryogenic Engineering Conference No.17 (ICEC17) Bristol, UK, Institute of Physics, 775-779.

Harris, I.L., Chambers, A.R. and Roberts, G.T. (1998) Results from the Atomic Oxygen Experiment on the STRV-1a spacecraft. Journal of Spacecraft and Rockets, 35, (5), 647-652.

Harris, M.R., Pajooman, G.H., Abu-Sharkh, S.M. and Mecrow, B.C. (1998) Comparison of flux-concentrated and surface-magnet configurations of the VRPM (transverse-flux) machine. In, Proceedings of Thirteenth International Conference on Electrical Machines (ICEM'98), Istanbul, Turkey, 02 - 04 Sep 1998. , 1119-1122.

Harris, M.S., Nightingale, C., McDonald, P.C. and Keary, A. (1998) Physical property measurement and computer simulated performance prediction of rigid polyisocyanurate foam at cryogenic temperatures. Journal of Cellular Plastics, 34, (5), 412-429. (doi:10.1177/0021955X9803400503).

Hill, M., Bailey, J.D. and Reed, P.A.S. (1998) Hypermedia systems for improving knowledge, understanding and skills in engineering degree courses. Computers and Education, 31, (1), 69-88. (doi:10.1016/S0360-1315(98)00019-0).

Holmes, R. (1998) Rotor vibration control using squeeze-film dampers. In, Proceedings of IFToMM: Fifth International Conference on Rotor Dynamics, Darmstadt, Germany, 1998. , 32-51.

Hughes, T.J., Yang, Y., Beduz, C. and Power, A. (1998) Magnet coupling and self-field AC losses of two neighbouring Ag sheathed PbBi2223 tapes. Physica C: Superconductivity, 310, (1-4), 187-191. (doi:10.1016/S0921-4534(98)00459-6).

Irenji, Neamat Taghizadeh (1998) Calculation of Electromagnetic Rotor Losses in High-Speed Permanent Magnet Machines. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 191pp.

Jeffery, P.A., McBride, J.W., Swingler, J. and Weaver, P.M. (1998) An investigation into arc contact immobility and current limiting performance of miniature circuit breakers using the Taguchi design of experiments. In, Proceedings of 19th International Conference on Electric Contact Phenomena (ICEC'98), Nuremberg, Germany, 14 - 17 Sep 1998. , 473-478.

Jeffrey, D.R., Zhang, X. and Hurst, D.W. (1998) Some aspects of the time-averaged and unsteady aerodynamics of Gurney flaps. In, Proceedings of 1st MIRA International Conference on Vehicle Aerodynamics. 1st MIRA International Conference on Vehicle Aerodynamics Nuneaton, UK, MIRA. (350).

Jeong, H.K. and Shenoi, R.A. (1998) Reliability analysis of mid-plane symmetric laminated plates using direct simulation method. Composite Structures, 43, (1), 1-13. (doi:10.1016/S0263-8223(98)00085-3).

Jeong, H.K. and Shenoi, R.A. (1998) Reliability analysis of specially orthotropic plates using Hasofer-Lind's safety index method. In, Proceedings of the 17th International on Offshore Mechanics and Arctic Engineering. 17th International on Offshore Mechanics and Arctic Engineering New York, USA, American Society Of Mechanical Engineers (ASME), 98-1485.

Jiang, Liudi, Sun, Yuping, Wan, Xinggong, Wang, Kaiyou, Xu, Guoyang, Chen, Xianhui, Ruan, Keqing and Du, Jiaju (1998) Improvement of the phase formation and superconductivity of the (Bi,Pb)2Sr2Ca2Cu3Ox silver sheathed tapes with B2O3 addition. Physica C: Superconductivity and its Applications, 300, (1-2), 61-66. (doi:10.1016/S0921-4534(98)00064-1).

Keary, A., Richardson, R.N. and Beduz, C. British Oxygen Company (1998) Synthetic liquid air research. Research report for BOC. Southampton, UK, University of Southampton, Institute of Cryogenics, 52pp.

Keary, A.C. and Bowen, R.J. (1998) Analytical study of the effect of natural convection on cryogenic pipe freezing. International Journal of Heat and Mass Transfer, 41, (10), 1129-1138. (doi:10.1016/S0017-9310(97)00269-X).

Keary, A.C., Bowen, R.J. and Syngellakis, S. (1998) Stress development during pipe freezing: Review and analysis. Southampton, GB, Department of Mechanical Engineering (Departmental Report, 98/01).

Lea, R.K. and Allen, R. Institute of Sound and Vibration (1998) Control and design of a submersible for astern motion. Southampton, UK, University of Southampton, Institute of Sound and Vibration Research (98/09).

Lewis, H.G. and Brown, M. (1998) FLIERS software framework and toolkit version 2.0: user guides. Southampton, UK, Department of Electronics and Computer Science, University of Southampton, 29pp. (ISIS Technical Report).

Lewis, H.G., Brown, M. and Tatnall, A.R.L. (1998) A software framework and toolkit for fuzzy land cover estimation from remotely sensed imagery. In, Proceedings of the GCTE/LUCC Open Science Conference on Global Change, Barcelona, Spain, 14 - 18 Mar 1998.

Lewis, H.G., Brown, M., Tatnall, A.R.L., Nixon, M.S. and Manslow, J.F. (1998) Data analysis and empirical classification in FLIERS. Southampton, UK, Department of Electronics and Computer Science, University of Southampton (ISIS Technical Report).

Li, Bao Cheng and Syngellakis, Stavros (1998) Numerical conformal mapping based on the generalised conjugation operation. Mathematics of Computation, 67, (222), 619-639.

Manton, S.J., Beduz, C., Yang, Y., Deligianis, K. and DeGroot, P.A.J. (1998) Enhanced flux pinning in lithium doped melted grown YBCO by low fluency neutron irradiation. Materials Science and Engineering: B, 53, (1-2), 182-184. (doi:10.1016/S0921-5107(97)00334-6).

Martinez, E., Hughes, T.J., Diez, C., Angurel, L.A., Yang, Y. and Beduz, C. (1998) Self-field AC losses of textured Bi2Sr2CaCu2O8+δ thin rods. Physica C: Superconductivity, 310, (1-4), 71-75. (doi:10.1016/S0921-4534(98)00436-5).

Maul, C., McBride, J.W. and Swingler, J. (1998) Measuring the constriction resistance in low power applications using non-linear techniques. In, Proceedings of 19th International Conference on Electric Contact Phenomena (ICEC'98), Nuremberg, Germany, 14 - 17 Sep 1998. , 117-121.

McBride, J.W. (1998) Highlight - a recently completed project. Power Engineering Journal, 12, (4), 172.

McBride, J.W., Weaver, P.M. and Jeffery, P.A. (1998) Arc root mobility during contact opening at high current. IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part A, 21, (1), 61-67. (doi:10.1109/95.679034).

McDonald, P.C. (1998) Self-regulating temperature control of a Gifford-McMahon refrigerator for potential use with neon in high-Tc power applications. Superconductor Science and Technology, 11, 817-820. (doi:10.1088/0953-2048/11/8/001).

McDonald, P.C. and Iosifescu, C. (1998) Use of a LVDT displacement transducer in measurements at low temperatures. Measurement Science and Technology, 9, 563-569. (doi:10.1088/0957-0233/9/4/002).

McDonald, Paul (1998) Review. Cryogenic Regenerative Heat Exchangers. High Temperatures - High Pressures, 30, (6), 725-726.

McLean, D. and Matsuda, H. (1998) Helicopter station-keeping; comparing LQR, fuzzy logic and neural net controllers. Engineering Applications of Artificial Intelligence, 11, (3), 411-418. (doi:10.1016/S0952-1976(98)00005-0).

Mihell, J.A. and Atkinson, J.K. (1998) Planar thick-film pH electrodes based on ruthenium dioxide hydrate. Sensors and Actuators B: Chemical, 48, (1-3), 505-511. (doi:10.1016/S0925-4005(98)00090-2).

Miller, M.K., Russell, K.F., Pareige, P.J., Starink, M.J. and Thomson, R.C. (1998) Low temperature copper solubilities in Fe-Cu-Ni. Materials Science and Engineering A, 250, (1), 49-54. (doi:10.1016/S0921-5093(98)00535-8).

Moshrefi-Torbati, M. and Hammond, J. K. (1998) Physical and geometrical interpretation of fractional operators. Journal of the Franklin Institute, 335, (6), 1077-1086. (doi:10.1016/S0016-0032(97)00048-3).

Moshrefi-Torbati, M., Simonis de Cloke, C. and Keane, A.J. (1998) Vibrational optimization of a mass-loaded stepped plate. Journal of Sound and Vibration, 213, (5), 865-887. (doi:10.1006/jsvi.1998.1536).

Mucci, Peter (1998) The design of an optical cell for the infra-red analysis of plastic materials. Journal of Engineering Design, 9, (1), 47-56. (doi:10.1080/095448298261660).

Muggleton, J.M. and Allen, R. (1998) Insights into the measurement of vertibral translation in the sagittal plane. Medical Engineering & Physics, 20, (1), 21-32. (doi:10.1016/S1350-4533(97)00045-3).

Nair, P.B., Keane, A.J. and Shimpi, R.P. (1998) Combining approximation concepts with genetic algorithm-based structural optimization procedures. In, 39th AIAA/ASME/ASCE/AHS/ACS Structures, Structural Dynamics and Materials Conference and Exhibition. Collection of technical papers, Pt.2. 39th AIAA/ASME/ASCE/AHS/ACS Structures, Structural Dynamics and Materials Conference and Exhibition USA, American Institute of Aeronautics and Astronautics, 1741-1751. (AIAA-1998-1912).

Nair, Presanth B., Keane, Andrew J. and Langley, Robin S. (1998) Improved first-order approximation of eigenvalues and eigenvectors. AIAA Journal, 36, (9), 1721-1727. (201).

Penson, R. and Allen, R. (1998) Intracranial hypertension: condition monitoring by time domain analysis. In, ASEE Instrumentation Division Program, Seattle, USA, 28 Jun - 01 Jul 1998. Washington DC, USA, American Society for Engineering Education9pp.

Penson, R.P and Allen, R. (1998) Intracranial pressure monitoring by time domain analysis. Journal of the Royal Society of Health, 118, (5), 289-294.

Price, N.M., Liu, M., Eatock Taylor, R. and Keane, A.J. (1998) Vibrations of cylindrical pipes and open shells. Journal of Sound and Vibration, 218, (3), 361-387. (doi: 10.1006/jsvi.1998.1862).

Puget, Y., Trethewey, K.R. and Wood, R.J.K. (1998) Electrochemical noise analysis of polyurethane coated steel subjected to erosion-corrosion. Wear, 233-235, 552-567. (doi:10.1016/S0043-1648(99)00226-4).

Richardson, R.N. (1998) Safety with cryogens. In, Seeber, Bernd (ed.) Handbook of Applied Superconductivity. UK, Institute of Physics, 875-888.

Richardson, R.N. and Arp, V. (1998) The properties of cryogens. In, Seeber, Bernd (ed.) Handbook of Applied Superconductivity. UK, Institute of Physics, 603-638.

Richardson, R.N., Bowen, R.J. and Evans, B.E. (1998) Maintaining water in a liquid state during operations in a cold climate: final report for DERA. Phase 2: experimental investigation. Southampton, UK, University of Southampton, Institute of Cryogenics, 55pp.

Robinson, G.M. and Keane, A.J. (1998) A case for multi-level optimisation in aeronautical design. In, Proceedings of the Royal Aeronautical Society Conference on Multidisciplinary Design and Optimisation. Royal Aeronautical Society Conference on Multidisciplinary Design and Optimisation London, UK, Royal Aeronautical Society, 1-6.

Rona, A., Chen, X.X., Zhang, X. and Edwards, J.A. (1998) Control of cavity flow oscillation through leading edge flow modification. In, 36th Aerospace Sciences Meeting and Exhibit, Reno, USA, 12 - 15 Jan 1998.

Sandham, N.D. and Howard, R.J.A. (1998) Direct simulation of turbulence using massively parallel computers. In, Emerson, D.R., Ecer, A., Periaux, J., Satofuka, N. and Fox, P. (eds.) Parallel Computational Fluid Dynamics '97. Computational Fluid Dynamics '97 Amsterdam, The Netherlands, North Holland, 23-32.

Scurlock, R.G. and Beduz, C. (1998) Reduction of the effects of asymmetrical convection in titled pulse-tube refridgerators. Cryogenics, 38, (3), 359-360. (doi:10.1016/S0011-2275(97)00167-7).

Simoes, J.A., Taylor, M., Marques, A.T. and Jeronimidis, G. (1998) Preliminary investigation of a novel controlled stiffness proximal femoral prosthesis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 212, (3), 165-175.

Spearing, S. Mark, Lagace, Paul A. and McManus, Hugh L.N. (1998) On the role of lengthscale in the prediction of failure of composite structures: assessment and needs. Applied Composites Materials, 5, (3), 139-149. (doi:10.1023/A:1008876701815).

Spearing, S.M. and Beaumont, P.W.R. (1998) Towards a predictive design methodology based on the physical modelling of the fracture of fiber composite. Applied Composite Materials, 5, (2), 69-94. (doi:10.1023/A:1008811721083).

Starink, M.J. and Zahra, A.-M. (1998) β′ and β precipitation in an Al–Mg alloy studied by DSC and TEM. Acta Materialia, 46, (10), 3381-3397. (doi:10.1016/S1359-6454(98)00053-6).

Starink, M.J. and Zahra, A.-M. (1998) Kinetics of isothermal and non-isothermal precipitation in an Al-6at%Si alloy. Philosophical Magazine A, 77, (1), 187-199. (doi:10.1080/014186198254696).

Starink, M.J. and Zahra, A.-M. (1998) Precipitation in a high silicon Al-Si alloy studied by isothermal calorimetry. Materials Science and Engineering A, 241, (1-2), 277-280. (doi:10.1016/S0921-5093(97)00460-7).

Starink, M.J., Zahra, C.Y. and Zahra, A.-M. (1998) Analysis of precipitation in Al-based alloys using a novel model for nucleation and growth reactions. Journal of Thermal Analysis and Calorimetry, 51, 933-942.

Sun, Yuping, Xu, Guoyang, Jiang, Liudi, Song, Wenhai, Wan, Xinggong, Du, Jiaju, Duan, Zhenzhong and Zhou, Lian (1998) C-axis I-V characteristics in highly c-axis-oriented (Bi,Pb)2Sr2Ca2Cu3Ox silver-sheathed tapes. Physica Status Solidi A, 168, (2), 479-485. (doi:10.1002/(SICI)1521-396X(199808)168:2<479::AID-PSSA479>3.0.CO;2-O).

Swingler, J. and McBride, J.W. (1998) The synergistic relationship of stresses in the automotive connector. In, Proceedings of the 19th International Conference on Electric Contact Phenomena, Nuremberg, Germany, 1998. , 141-145.

Swingler, J. and Mcbride, J.W. (1998) Modelling of energy transport in arcing electrical contacts to determine mass transfer. IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part A, 21, (1), 54-60. (doi:10.1109/95.679033).

Sykulski, J.K., Stoll, R.L., Goddard, K., Beduz, C., Yang, Y. and Power, A. (1998) Design of a HTS demonstrator transformer. In, Dew-Hughes, D., Scurlock, R. and Watson James, H.P. (eds.) Proceedings of the Seventeenth International Cryogenic Engineering Conference. ICEC17: Seventeenth International Cryogenic Engineering Conference Abingdon, UK, Taylor & Francis, 571-574.

Syngellakis, S. (1998) Boundary element methods in structural dynamic system problems. In, Leondes, Cornelius T. (ed.) Structural Dynamic Systems Computational Techniques and Optimization: Finite Element Analysis (FEA) Techniques. London, UK, Chemical Rubber Company, 97-147. (Gordon and Breach International Series in Engineering, Technology and Applied Science).

Syngellakis, S. (1998) A boundary element scheme for plate post-buckling analysis. In, Brebbia, C.A. (ed.) Boundary Element Research in Europe. Ashhurst, UK, Computational Mechanics, 305-316. (Modelling and Simulation, 20).

Syngellakis, S. (1998) Stability. In, Aliabadi, M.H. (ed.) Plate Bending Analysis With Boundary Elements. Ashurst, UK, Computational Mechanics, 309-533. (Advances in Boundary Elements, 2). (184).

Taylor, M., Tanner, K.E. and Freeman, M.A.R. (1998) Finite element analysis of the implanted proximal tibia: A relationship between the initial cancellous bone stresses and implant migration. Journal of Biomechanics, 31, (4), 303-10. (doi:10.1016/S0021-9290(98)00022-0).

Thew, M.T. and Smyth, I.C. (1998) Development and performance of oil-water hydrocyclone separators: a review. In, Proceedings of IMM Conference on Innovation in Physical Separation Technologies. IMM Conference on Innovation in Physical Separation Technologies London, GB, Institute of Materials, Minerals and Mining, 77-89.

Trethewey, K.R., Wood, R.J.K., Puget, Y. and Roberge, P.R. (1998) Development of a knowledge-based system for materials management. Materials & Design, 19, (1-2), 39-56. (doi:10.1016/S0261-3069(98)00010-7).

Wan, Xinggong, Sun, Yuping, Song, Wenhai, Wang, Kaiyou, Jiang, Liudi and Du, Jiaju (1998) Enhanced flux pinning of Bi-2223/Ar tapes with nano-MgO particles addition. Physica C: Superconductivity and its Applications, 307, (1-2), 46-50. (doi:10.1016/S0921-4534(98)00400-6).

Weber, J., Leitch, A.W.R. and Alex, V. (1998) Hydrogen molecules in crystalline silicon. In, Huff, H.R., Tsuya, H. and Gösele, U. (eds.) Semiconductor Silicon. Semiconductor Silicon (8th International Symposium) Pennington, USA, Electrochemical Society, 973-983. (Proceedings of the Electrochemical Society Pv 98-1).

Westbury, P.S., Sandham, N.D. and Morrison, J.F. (1998) Bursts and subgrid-scale energy transfer in turbulent wall-bounded flow. In, Frisch, Uriel (ed.) Advances in Turbulence. 7th European Turbulence Conference USA, Kluwer Academic Publishers, 23-26. (Fluid Mechanics and Its Applications, VII).

Wheeler, D.W. and Wood, R.J.K.W. (1998) Solid particle erosion of CVD diamond coatings. In, Proceedings of International Conference on Erosive and Abrasive Wear (ICEAW 99), Cambridge, UK, 13 - 17 Sep 1998.

Whitten, T., Merry, S.L. and Allen, R. (1998) A novel propulsion system for small underwater vehicles. In, Oceanology International 98: the global ocean. Conference Proceedings Vol. 3. Oceanology International 98 : The Global Ocean New Malden, UK, Spearhead Exhibitions Ltd, 165-174.

Wood, R.J.K. and Wheeler, D.W. (1998) Design and performance of a high velocity air-sand jet impingement erosion facility. Wear, 220, (2), 95-112. (doi:10.1016/S0043-1648(98)00196-3).

Wood, R.J.K., Wheeler, D.W., Lejeau, D.C. and Mellor, B.G. (1998) Sand erosion performance of CVD boron carbide coated tungsten carbide. In, Proceedings of International Conference on Erosive and Abrasive Wear (ICEAW 1998), Cambridge, UK, 14 - 17 Sep 1998.

Wood, R.J.K.W., Puget, Y., Trethewey, K.R. and Stokes, K. (1998) The performance of marine coatings and pipe materials under fluid-borne sand erosion. Wear, 219, (1), 46-59. (doi:10.1016/S0043-1648(98)00231-2).

Xing, J.T. and Price, W. G. (1998) Variational principles for three kinds of nonlinear elastodynamic problems. Advances in Engineering Mechanics, in Honor of Academician Hu Haichang&#39;s 70th Birthda, (editors. Wang Dajun and Qu Guangji, 36-44.

Xing, J.T. and Price, W. G. (1998) A variational solution method applied to a nonlinear water-structure interaction system. Proceedings of the international conference on vibration engineering},(ed. B.C. Wen, 1, 219-224.

Yang, Y., Hughes, T.J., Beduz, C. and Darmann, F. (1998) Experimental study on AC losses in Ag sheathed PbBi2223 tapes with twist filaments. Physica C: Superconductivity, 310, (1-4), 147-153. (doi:10.1016/S0921-4534(98)00451-1).

Zahra, A.-M. and Starink, M.J. (1998) Modelling of nucleation and growth processes in aluminium alloys. In, Ciach, R. (ed.) Advanced Light Alloys and Composites. NATO Advanced Study Institute on Advanced Light Metals and Composites Berlin, Germany, Springer, 17-22. (NATO Science Partnership Sub-Series: 3 59).