Browse by Divisions pre August 2011

Leighton, T.G., Heald, G.J., Griffiths, H. and Griffiths, G. (eds.) (2001) Acoustical oceanography, St Albans, UK, Institute of Acoustics, 424pp. (Proceedings of the Institute of Acoustics, 23 Part 2).

Holford, K.M., Dulieu-Barton, J.M., Brandon, J.A., Gilchrist, M.D. and Worden, K. (eds.) (2001) Damage assessment of structures IV, Uetikon-Zurich, Switzerland, Trans Tech, 486pp. (DAMAS).

DeBoer, M., Judy, M., Kahn, H. and Spearing, S.M (eds.) (2001) Materials science of microelectromechanical systems (MEMS) devices III, Materials Research Society, 348pp.

Wilson, P.A. and Hearn, G.E. (eds.) (2001) Proceedings of 6th International Conference on Fast Sea Transportation (FAST2001), London, UK, Royal Institution of Naval Architects, 284pp.

Leighton, T.G., Heald, G.J., Griffiths, H. and Griffiths, G. (eds.) (2001) Proceedings of the Institute of Acoustics Conference on Acoustical Oceanography, Bath, UK, Bath University Press, 424pp.

Abu-Sharkh, S.M., Abu-Sara, M. and Hussien, Z.F. (2001) Current control of utility-connected DC-AC three-phase voltage-source inverters using repetitive feedback. In, Proceedings of 9th European Conference on Power Electronics and Applications (EPE 01), Graz, Austria, 27 - 29 Aug 2001. 6pp.

Abu-Sharkh, S.M., Turnock, S.R. and Draper, G. (2001) Performance of a tip-driven electric thrusters for unmanned underwater vehicles. In, The Proceedings of The Eleventh (2001) International Offshore and Polar Engineering Conference. The Eleventh (2001) International Offshore and Polar Engineering Conference Mountain View, USA, International Society of Offshore and Polar Engineers (ISOPE), 321-324.

Abu-Sharkh, S.M., Yuratich, M., Harris, M.R. and Head, P. (2001) A PM brushless motor for downhole drilling. In, Drives and Controls Power Electronic Conference, London, GB,

Afanaviev, P. and Kerridge, D.H. (2001) Reactivity of V2O5, MoO5 and WO3 in molten KNO3, studied by mass spectormetry. Journal Alloys and Compounds, 322, (1-2), 97-102. (doi: 10.1016/S0925-8388(01)00955-0).

Ahmad, S.M., Chipperfield, A.J. and Tokhi, M.O. (2001) Parametric modelling and dynamic characterization of a two-degree-of-freedom twin-rotor multi-input multi-output system. Proceedings of the Institution of Mechanical Engineers Part G, Journal of Aerospace Engineering, 215, (2), 63-78. (doi:10.1243/0954410011531772).

Ahmed, T., Hudson, D.A. and Temarel, P. (2001) Effects of hull geometry and irregular frequencies on three-dimensional seakeeping predictions. In, NuTTS 2001: Fourth Numerical Towing Tank Symposium, Hamburg, Germany, Sep 2001. 4pp.

Al-Mosawi, M.K., Beduz, C., Yifeng, Yang, Webb, M. and Power, A. (2001) The effect of flux diverters on AC losses of a 10kVA high temperature superconducting demonstrator transformer. Institute of Electrical and Electronics Engineers: Transactions on Applied Superconductivity, 11, (1), 2800-2803. (doi:10.1109/77.919645).

Alam, M. and Sandham, N.D. (2001) DNS of transition near the leading edge of an aerofoil. In, Geurts, Bernard J., Friedrich, Rainer and Métais, Olivier (eds.) Direct and Large-Eddy Simulation IV. DLES4: 4th International ERCOFTAC Workshop on Direct and Large-Eddy Simulation The Netherlands, Kluwer Academic, 285-292. (ERCOFTAC Series 8). (1078).

Alonso-Vazquez, A., Luage-Pederson, H., Lidgren, L. and Taylor, M. (2001) Stability of ankle arthrodesis with internal fixation. A preliminary finite element study. In, International Society of Biomechanics XVIIIth Congress, Zurich, Switzerland, 08 - 13 Jul 2001. , 681.

Amirhagi, S., Reehal, H.S., Wood, R.J.K. and Wheeler, D.W. (2001) Diamond coatings on tungsten carbide and their erosive wear properties. Surface and Coatings Technology, 135, (2-3), 126-138. (doi: 10.1016/S0257-8972(00)01083-5).

Anthony, D.K. and Elliott, S.J. (2001) On reducing vibration transmission in a two-dimensional cantilever truss structure using geometric optimization and active vibration control techniques. Journal of the Acoustical Society of America, 110, (2), 1191-1194. (doi:10.1121/1.1381022).

Ashworth, Mike, Emerson, David R., Sandham, Neil D., Yao, Yufeng and Li, Qinling (2001) Parallel DNS using a compressible turbulent channel flow benchmark. In, Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2001) Barcelona, Spain, The International Center for Numerical Methods in Engineering (CIMNE).

Athanassiadou, M. and Castro, I.P. (2001) Neutral flow over a series of rough hills: a laboratory experiment. Boundary-Layer Meteorology, 101, (1), 1-30. (doi: 10.1023/A:1019250801054).

Atkinson, J.K. and Glasspool, W.V. (2001) An investigation of the factors influencing stability in continuously-powered screen-printed amperometric dissolved oxygen sensors. Microelectronics International, 18, (2), 26-31.

Atkinson, J.K., Sion, R. and Zhang, Z. (2001) Effects of aspect ratio on the temperature coefficient of resistance matching and low frequency noise levels in thick film strain sensors. Microelectronics International, 18, (1), 40-43. (doi: 10.1108/13565360110380107).

Atkinson, J.K. and Sion, R.P. (2001) A novel low cost sensor for measuring cylinder pressure and improving performance of an internal combustion engine. Sensor Review, 22, (2), 139-148. (doi:10.1108/02602280210697230).

Bah, M. T., Keane, A. J. and Bhaskar, A. (2001) Effects of Uncertainty in Root Fixity on Turbine Blade Free Vibration. In, Bathe, K.J. (ed.) Computational fluid and solid mechanics: Proceedings of the first MIT conference on computational fluid and solid mechanics. first MIT Conference on Computational Fluid and Solid Mechanics USA, Elsevier Science. (2088).

Bah, M.T., Bhaskar, A. and Keane, A.J. (2001) Statistical investigation of the free vibration mistuned blade system. In, Proceedings of USNCCM VI: Sixth US National Congress on Computational Mechanics. USNCCM VI: Sixth US National Congress on Computational Mechanics USA, United States Association for Computational Mechanics, p.858.

Bahaj, A.S., James, P.A.B. and McBride, J.W. (2001) Accelerated lifetime testing of photovoltaic connectors: implications to built environment applications. In, Proceedings of the 17th European Solar Energy Conference held in Munich, Germany, 22-26 October 2001 [3-volume book set and CD-ROM]. Seventeenth European Solar Energy Conference Munich, Germany; Florence, Italy, WIP-Munich and ETA-Florence, 630-633.

Bailey, P.A., Ballard, E.J. and Temarel, P. (2001) Dynamic behaviour of rigid mono- and multi-hulled vessels in waves, incorporating non-linear excitation. In, Wu, You-Sheng, Zhou, Guo-Jun and Cui, Wei-Cheng (eds.) Proceedings of the 8th International Symposium on Practical Design of Ships and Other Floating Structures. 8th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2001) Oxford, UK, Elsevier, 571-578.

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (2001) Comparisons between theory and experiment in a seakeeping validation study. Transactions of the Royal Institution of Naval Architects, 143, 44-77.

Ball, G.J. (2001) Lagrangian modelling of interfaces under high deformation using a free Lagrange technique. In, Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS - CFD 2001). European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS - CFD 2001) Barcelona, Spain, International Center for Numerical Methods in Engineering, 1-18.

Ballard, E.J., Du, S.X. and Hudson, D.A. (2001) Motions of mono/multi-hulled vessels in regular waves. In, Proceedings of the Sixth International Conference on Fast Sea Transportation (FAST 2001). Sixth International Conference on Fast Sea Transportation (FAST 2001) London, UK, The Royal Institution of Naval Architects, 219-233.

Barrett, D.S. and Taylor, M. (2001) Influence of lift-off on polyethylene stresses in TKR. In, 47th Annual Meeting of the Orthopaedic Research Society, San Francisco, USA, 25 - 28 Feb 2001. 1pp.

Bazoune, A., Khulief, Y.A., Stephen, N.G. and Mohiuddin, M.A. (2001) Dynamic response of spinning tapered Timoshenko beams using modal reduction. Finite Elements in Analysis and Design, 37, (3), 199-219. (doi:10.1016/S0168-874X(00)00030-5).

Bedford, G.M., Vitanov, V.I. and Voutchkov, I.I. (2001) On the thermo-mechanical events during friction surfacing of high speed steels. Surface and Coatings Technology, 141, (1), 34-39. (doi:10.1016/S0257-8972(01)01129-X).

Bergamini, G., Ciavarella, M. and Demelio, G. (2001) Recent trends in structural design of ultra-light refrigerated semitrailers. International Journal of Heavy Vehicle Systems, 8, (2), 142-154.

Bhaskar, A., Sahu, S.S. and Nakra, B.C. (2001) Approximations and reanalysis over a parameter interval for dynamic design. Journal of Sound and Vibration, 248, (1), 178-186. (doi:10.1006/jsvi.2001.3686).

Bhaskar, Atul (2001) Taussky' s theorem, symmetrizability and modal analysis revisted. Proceedings of The Royal Society A: Mathematical, Physical and Engineering Sciences, 457, (2014), 2455-2480. (doi: 10.1098/rspa.2001.0820).

Bingham, A.E., Hampshire, J.K., Miao, S.H. and Temarel, P., Wilson, P. A. (ed.) (2001) Motions and loads for a trimaran travelling in regular waves. 6th International Conference on Fast Sea Transportation, 2, 167-176. (doi:10.3940/rina.ft.2007.).

Birkin, P.R., Watson, Y.E., Smith, K.L., Leighton, T.G. and Simpson, M.D. (2001) Measurement of species flux from a bubble using an acousto-electrochemical technique. In, Leighton, T.G., Heald, G.J., Griffiths, H. and Griffiths, G. (eds.) 'Acoustical Oceanography', Proceedings of the Institute of Acoustics. London, UK, Institute of Acoustics, 242-249. (Proceedings of the Institute of Acoustics, 23 2).

Blake, J.I.R., Shenoi, R.A., House, J. and Turton, T. (2001) Progressive damage analysis of tee joints with viscoelastic inserts. Composites Part A: Applied Science and Manufacturing, 32, (5), 641-653. (doi:10.1016/S1359-835X(00)00158-5).

Blake, J.I.R. and Wilson, P.A., Wilson, P.A. (ed.) (2001) An analysis of planing craft vertical dynamics in calm water and waves. , 77-90. (doi:10.3940/rina.ft.2001).

Blake, J.I.R. and Wilson, P.A. (2001) A visual experimental technique for planing craft performance. Transactions of Royal Institution of Naval Architects, 143, (285), 393-404.

Bonar, J.M., McGregor, B.M., Cowern, N.E.B., Dan, A.H., Cooke, G.A. and Willoughby, A.F.W. (2001) Furnace and RTA injection of point defects into CVD grown B-doped Si and SiGe. In, Materials Research Society Symposium Proceedings. , Materials Research Socciety, B4.9.1-B4.9.6.

Bonar, J.M., Willoughby, A.F.W., Dan, A.H., McGregor, B.M., Lerch, W., Loffelmacher, D., Cooke, G.A. and Dowsett, M.G. (2001) Antimony and boron diffusion in SiGe and Si under the influence of injected point defects. Journal of Materials Science: Materials in Electronics, 12, (4-6), 219-221. (doi:10.1023/A:1011299017835).

Borri-Brunetto, M., Chiaia, B. and Ciavarella, M. (2001) Incipient sliding of rough surfaces in contact: a multiscale numerical analysis. Computer Methods in Applied Mechanics and Engineering, 190, (46-47), 6053-6073. (doi: 10.1016/S0045-7825(01)00218-3).

Bose, K., Wheeler, D.W. and Wood, R.J.K. (2001) Micro-abrasion of CVD diamond coatings. In, University of Southampton School of Engineering Sciences Postgraduate Conference, Southampton, UK, 2001.

Bose, K. and Wood, R.J.K. (2001) Simulation of erosive wear of CVD boron carbide coatings by static and repetitive nanoindentation. In, 2nd World Tribology Congress, Vienna, Austria, Sep 2001. Vienna, Austria, 2nd World Tribology Congress4pp.

Boselli, J., Pitcher, P.D., Gregson, P.J. and Sinclair, I. (2001) Numerical modelling of particle distribution effects on fatigue in Al–SiCp composites. Materials Science and Engineering: A, 300, (1-2), 113-124. (doi:10.1016/S0921-5093(00)01671-3).

Boyd, S.W., Winkle, I.E. and Day, A.H. (2001) Bonded butt joint in pultruded GRP panels. In, Proceedings of the Sixth International Conference on Structural Adhesives in Engineering. Sixth International Conference on Structural Adhesives in Engineering London, UK, IOM Communications, 27-30.

Boyd, Stephen W., Day, Alexander H. and Winkle, Ian E. (2001) Design considerations for lightweight high-speed ships using planked construction. In, Proceedings of the 6th International Conference on Fast Sea Transportation (FAST 2001). 6th International Conference on Fast Sea Transportation (FAST 2001) London, UK, The Royal Institution of Naval Architects, 231-241.

Brandon, M.A., Millard, N.W., McPhail, S.D., Stevenson, P., Pebody, M., Perrett, J., Squires, M. and Griffiths, G. (2001) Measurements of the sea ice thickness distribution and icebergs using Autonomous Underwater Vehicle Autosub 2 in Antarctica. EOS: Transactions, American Geophysical Union, 82, (47, supplement), F658-[1pp].

Bressloff, N.W. (2001) A parallel pressure implicit splitting of operators algorithm applied to flows at all speeds. International Journal for Numerical Methods in Fluids, 36, (5), 497-518. (doi:10.1002/fld.140).

Bressloff, N.W. (2001) Three-dimesional pulsatile flow through asymmetrically and symmetrically constricted vessels. In, Proceedings of Bioengineering Conference: Summer Bioengineering Conference. Bioengineering Conference: Summer Bioengineering Conference New York, USA, American Society Of Mechanical Engineers, 525-526.

Burianek, Dennis A. and Spearing, S. Mark (2001) Delamination growth from facesheet seams in cross-ply titanium/graphite hybrid laminates. Composites Science and Technology, 61, (2), 261-269. (doi: 10.1016/S0266-3538(00)00206-2).

Cao, Q., Xu, L., Djidjeli, K., Price, W.G. and Twizell, E.H. (2001) Analysis of period-doubling and chaos of a non-symmetric oscillator with piecewise-linearity. Chaos, Solitons and Fractals, 12, (10), 1917-1927. (doi:10.1016/S0960-0779(00)00155-7).

Castro, Ian, Vosper, Simon, Paisley, Martin and Hayden, Paul (2001) Vortex shedding behind tapered obstacles in neutral & stratified flow. Dynamics of Atmospheres and Oceans, 34, (2-4), 145-163. (doi:10.1016/S0377-0265(01)00065-3).

Chen, J. and New, A. (2001) Application of decohesive model with mixed damage scale in fracture analysis of composite materials. Fatigue & Fracture of Engineering Materials & Structures, 24, (11), 761-769. (doi:10.1046/j.1460-2695.2001.00441.x).

Chen, J., Taylor, M., Gregson, P.J. and Browne, M. (2001) Introducing an interface failure model to predict fatigue crack growth of biomedical material specimens. In, Fifth International Symposium on Computer Methods in Biomechaniocs and Biomedical Engineering, 31st October - 3rd November 2001, , 63F.

Chen, Kuo-Shen, Spearing, S.M. and Nemeth, Noel N. (2001) Structural design of a silicon micro turbo generator. AIAA Journal, 39, 720-728.

Chen, Z.M. and Xin, Z. (2001) Homogeneity criterion for the Navier-Stokes equations in the whole spaces. Journal of Mathematical Fluid Mechanics, 3, (2), 152-182.

Chen, Zhi-Min and Price, W.G. (2001) Blow-up rate estimates for weak solutions of the Navier-Stokes equations. Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 457, (2015), 2625-2642. (doi: 10.1098/rspa.2001.0854).

Chen, Zhi-Min and Price, W.G. (2001) Morrey space techniques applied to the interior regularity problem of the Navier-Stokes equations. Nonlinearity, 14, (6), 1453-1472. (doi:10.1088/0951-7715/14/6/303).

Chernyshenko, S.I. (2001) Large-scale instability of the flow past an airfoil in the presence of other bodies. In, VIII All-Russian Congress on Theoretical and Applied Mechanics, Perm, Russia, 23 - 29 Aug 2001. 1pp.

Chipperfield, A.J. (2001) Modelling Control Systems Using IEC 61499. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems & Control Engineering, 216, (2), 211.

Chmelik, F., Lukac, P., Kainer, K.-U. and Langdon, T.G. (2001) Non-destructive characterization of magnesium-based metal matrix composites subjected to thermal cycling. In, Mazel, Pavel (ed.) Defektoskopie 2001. Brno, Czech Republic, Czech Society for Nondestructive Testing, 137-144.

Chung, Y.M., Luo, K.H. and Williams, J.J.R. (2001) Direct numerical simulation of an impinging jet. In, Linborg, L. (ed.) Proceedings of Second International Symposium on Turbulence and Shear Flow Phenomena. Second International Symposium on Turbulence and Shear Flow Phenomena , Kluwer, 271-276.

Chung, Y.M., Tucker, P.G. and Luo, K.H. (2001) Large-eddy simulation of complex internal flows. In, Direct and Large-Eddy Simulation IV, Enschede, The Netherlands, 18 - 20 Jul 2001. , 373-80.

Ciavarella, M. (2001) Closure on "Some comments on recent generalizations of Cattaneo–Mindlin". International Journa of Solids Structures, 38, (14), 2459-2463. (doi:10.1016/S0020-7683(00)00102-5).

Ciavarella, M., Decuzzi, P. and Monno, G. (2001) The design of hydrodynamically lubricated journal bearings against crack propagation. The Journal of Strain Analysis for Engineering Design, 36, (2), 245-250.

Ciavarella, M. and Demelio, G. (2001) Elastic multiscale contact of rough surfaces: Archard's model revisited and comparisons with modern fractal models. Journal of Applied Mechanics, 68, (3), 496-498. (doi: 10.1115/1.1352016).

Ciavarella, M. and Demelio, G. (2001) A review of analytical aspects of fretting fatigue, with extension to damage parameters, and application to dovetail joints. International Journal of Solids and Structures, 38, (10-13), 1791-1811. (doi:10.1016/S0020-7683(00)00136-0).

Ciavarella, Michele and Decuzzi, Paolo (2001) The state of stress induced by the plane frictionless cylindrical contact. I. The case of elastic similarity. International Journal of Solids and Structures, 38, (26-27), 4507-4523. (doi:10.1016/S0020-7683(00)00289-4).

Ciavarella, Michele and Decuzzi, Paolo (2001) The state of stress induced by the plane frictionless cylindrical contact. II. The general case (elastic dissimilarity). International Journal of Solids Structures, 38, (26-27), 4525-4533. (doi:10.1016/S0020-7683(00)00290-0).

Collar, P. and Griffiths, G. (2001) Single point current meters. In, Steele, John H., Thorpe, Steve A. and Turekian, Karl K. (eds.) Encyclopedia of Ocean Sciences. San Diego, USA, Academic Press, 2796-2803. (doi:10.1006/rwos.2001.0326).

Cotton, J., Grant, J.W., Jensen, M.K. and Love, B.J. (2001) Analytical solutions to the shear strength of interfaces failing under flexure loading conditions. International Journal of Adhesion and Adhesives, 21, (1), 65-70. (doi:10.1016/S0143-7496(00)00031-2).

Cotton, J.R., Zioupos, P. and Taylor, M. (2001) Simulated material property degradation during fatigue of human cancellous bone, as modelled by a regular honeycombe structure. In, Kamm, R.D., Schmid-Schonbein, G.W., Ateshian, G.A. and Hefzy, M.S. (eds.) Proceedings of 2001 Bioengineering Conference, ASME 2001. 2001 ASME Summer Bioengineering Conference Snowbird, Utah, USA, ASME, 287-288.

Cotton, J.R., Zioupos, P. and Taylor, M. (2001) Simulation of material property evolution of cortical bone in bending fatigue and its implications on cancellous bone. In, International Society of Biomechanics XVIIIth Congress, Zurich, Switzerland, 08 - 13 Jul 2001. , 215-216.

Cotton, J.R., Zioupos, P., Winwood, K., Anderson, P., Davies, G.R. and Taylor, M. (2001) Static FEA of cortical bone tensile test with variations in modulus identified from micro-CT scans. In, Proceedings of the 16th Conference of the European Society of Biomaterials. 16th Conference of the European Society of Biomaterials , European Society of Biomaterials, 125.

Cox, S.J., Fairman, M.J., Xue, G., Wason, J.L. and Keane, A.J. (2001) The GRID: computational and data resource sharing in engineering optimisation and design search. In, Proceedings of the 2001 ICPP Workshops. International Conference on Parallel Processing Workshops (ICPP) 2001 , IEEE Computer Society, 207-12. (doi:10.1109/ICPPW.2001.951947).

Cunningham, P.R., Dulieu-Barton, Janice M., Dutton, A.G. and Shenoi, R.A. (2001) Thermoelastic characterisation of damage around a circular hole in a GRP component. Key Engineering Materials, 221-222, 453-463.

Cunningham, P.R. and White, R.G. (2001) A new measurement technique for the estimation of core shear strain in closed sandwich structures. Composite Structures, 51, (3), 319-334. (doi: 10.1016/S0263-8223(00)00148-3).

Dan, A.H., Willoughby, A.F.W., Bonar, J.M. and McGregor, B.M. (2001) Diffusion studies of antimony and boron in Si and SiGe under point defect injections by Rapid Thermal Anneal. In, Proceedings of the Seventh Postgraduate Conference in Engineering Materials, Southampton, UK, 2000. Southampton, UK, University of Southampton2pp, 17-18.

DeFazio, L., Syngellakis, S., Wood, R.J.K., Furgiuele, F.M. and Sciume, G. (2001) Nanoindentation of CVD diamond: comparison of an FE model with analytical and experimental data. Diamond and Related Materials, 10, (3-7), 765-769. (doi: 10.1016/S0925-9635(00)00496-9).

Decuzzi, P., Ciavarella, M. and Monno, G. (2001) Frictionally excited thermoelastic instability in multi-disk clutches and brakes. Journal of Tribology, 123, (4), 865-871. (doi:10.1115/1.1352740).

Dokos, L., Chambers, A.R. and Mowlem, M.C. (2001) Application of time frequency analysis on data from a low velocity impact using fibre optic sensors. In, International Committee on Composite Materials (ICCM) 13, Beijing, China, 13 Jun 2001. , 25-29.

Donaldson, Lord of Lymington (2001) A rocky road to maritime safety. Southampton, UK, University of Southampton, 17pp. (Ship Science Reports, (121) ).

Dransfeld, S., Tatnall, A.R.L., Robinson, I.S. and Mobley, C.D. (2001) Retrieval of optically active parameters from oceanic reflectance spectra using multi-layer perceptron and K-Nearest neighbour algorithms. In, Proceedings of Current Problems in Optics of Natural Waters. Current Problems in Optics of Natural Waters Dartmouth, Canada, Bedford Institute of Oceanography, 99-105.

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2001) An alternative expression of the restoring coefficient matrix associated with a moving flexible structure. In, China Ship Scientific Research Center 50th Jubilee Workshop, Wuxi, China, Sep 2001.

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2001) Methods to reduce the effects of irregular frequencies in hydrodynamic analysis of vessels with forward speed. In, Wu, You-Sheng, Zhou, Guo-Jun and Cui, Wei-Cheng (eds.) Practical design of ships and other floating structures. 8th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS) , Elsevier, 847-855.

Duan, W.Y., Huang, D.B., Hudson, D.A. and Price, W.G., Wilson, Philip A. (ed.) (2001) Comparison of two seakeeping prediction methods for high speed multi-hull vessels. FAST 2001: Sixth International Conference on Fast Sea Transportation, 2, 243-250. (doi:10.3940/rina.ft.2001).

Dulieu-Barton, J.M., Earl, J.S. and Shenoi, R.A. (2001) Determination of the stress distribution in foam-cored sandwich construction tee joints. Journal of Strain Analysis for Engineering Design, 36, (6), 545-560. (doi:10.1243/0309324011514700).

Earl, J.S., Dulieu-Barton, J.M. and Shenoi, R.A. (2001) Thermoelastic stress analysis of aged sandwich structures. In, ICCM13: 13th International Conference on Composite Materials, Beijing, China, Jun 2001. 10pp.

El-Beltagy, Mohammed A. and Keane, Andy J. (2001) Evolutionary optimization for computationally expensive problems using Gaussian processes. In, Proceedings of the International Conference on Artificial Intelligence (IC-AI'2001). International Conference on Artificial Intelligence (IC-AI'2001) , CSREA Press, 708-714.

Eniolotu, O., Taylor, A., New, A., Roques, A. and Browne, M. (2001) Experimental and analytical evaluation of the dynamic change in viscosity during PMMA bone cement curing. In, 16th European Conference of the European Society for Biomaterials, London, UK, Sep 2001. , LMP25.

Fangohr, H., Cox, S.J. and De Groot, P.A.J. (2001) Vortex dynamics in two-dimensional systems at high driving forces. Physical Review B, 64, (6), 064505-[10pp]. (doi:10.1103/PhysRevB.64.064505).

Fangohr, Hans, de Groot, Peter A.J. and Cox, Simon J. (2001) Critical transverse forces in weakly pinned driven vortex systems. Physical Review B, 63, (6), 064501-[5pp]. (doi:10.1103/PhysRevB.63.064501).

Farrant, T., Tan, M. and Price, W.G. (2001) A cell boundary element method applied to laminar vortex shedding from circular cylinders. Computers and Fluids, 30, (2), 211-236. (doi:10.1016/S0045-7930(00)00009-8).

Fitzgerald, A.G., Jiang, Liudi, Rose, M.J. and Dines, T.J. (2001) Microstructural properties of amorphous carbon nitride films synthesized by dc magnetron sputtering. Applied Surface Science, 175-176, 525-530. (doi:10.1016/S0169-4332(01)00107-6).

Fujita, T., Horita, Z. and Langdon, T.G. (2001) Diffusivity measurements in ultrafine-grained Al-Mg alloys produced by equal-channel angular pressing. In, Chandra, T., Higashi, K., Suryanarayana, C. and Tome, C. (eds.) THERMEC 2000 - International Conference on Processing and Manufacturing of Advanced Materials. International Conference on Processing and Manufacturing of Advanced Materials Oxford, UK, Elsevier.

Fujita, Tomoyuki, Hasegawa, Hirsashi, Horita, Zenji and Langdon, Terence G. (2001) Diffusion in ultrafine-grained Al-Mg alloys. In, Diffusion in Materials DIMAT2000. International Conference on Diffusion in Materials Switzerland, Trans Tech, 1205-1210. (Defect and Diffusion Forum 194-199).

Fukuda, M., Oh-ishi, K., Horita, Z. and Langdon, T.G. (2001) Microstructures and mechanical properties of low-carbon steel processed by equal-channel angular pressing. In, Takaki, S. and Maki, T. (eds.) Ultrafine Grained Steels. International Symposium on Ultrafine Grained Steels (ISUGS 2001) Tokyo, Japan, Iron and Steel Institute of Japan, 156-159.

Furukawa, M., Horita, Z. and Langdon, T.G. (2001) Developing ultrafine grain sizes using severe plastic deformation. Advanced Engineering Materials, 3, 121-125. (doi:10.1002/1527-2648(200103)3:3<121::AID-ADEM121>3.0.CO;2-V).

Furukawa, M., Horita, Z. and Langdon, T.G. (2001) The principles of processing using severe plastic deformation: Application to aluminum alloys. In, Tiryakioglu, M. (ed.) Advances in the Metallurgy of Aluminum Alloys. James T. Staley Honorary Symposium on Aluminum Alloys , ASM International, 47-56.

Furukawa, M., Horita, Z. and Langdon, T.G. (2001) Using severe plastic deformation for the processing of structural metals. In, Lesuer, D.R. and Srivatsan, T.S. (eds.) Modeling the Performance of Engineering Structural Materials. Symposium Sponsored by the Structural Materials Division (Smd) of Tms (The Minerals, Metals & Materials Society) Held During the fall , TMS, 267-276.

Furukawa, M., Horita, Z., Nemoto, M. and Langdon, T.G. (2001) Review: Processing of metals by equal-channel angular pressing. Journal of Materials Science, 36, (12), 2835-2843. (doi:10.1023/A:1017932417043).

Furukawa, M., Lee, S., Horita, Z. and Langdon, T.G. (2001) Mechanical properties of Al-Mg-Sc and commercial aluminum alloys after equal-channel angular pressing. In, Kim, Nack J., Lee, C.S. and Eylon, D. (eds.) Proceedings of the International Conference on Light Materials for Transportation Systems (LiMAT-2001) (2nd) Held in Pusan, Korea on May 6-10, 2001. International Conference on Light Materials for Transportation Systems (LiMAT-2001) Pohang, Korea, Center for Advanced Aerospace Materials, 647-652.

Furukawa, M., Utsunomiya, A., Komura, S., Horita, Z., Nemoto, M. and Langdon, T.G. (2001) Optimization for superplasticity in ultrafine-grained Al-Mg-Sc alloys using equal-channel angular pressing,. In, Chandra, Namas (ed.) Superplasticity in Advanced Materials - ICSAM-2000. International Conference on Superplasticity in Advanced Materials (ICSAM-2000) Switzerland, Trans Tech, 431-436. (Materials Science Forum 357-359).

Furukawa, M., Utsunomiya, A., Matsubara, K., Horita, Z. and Langdon, T.G. (2001) Influence of magnesium on grain refinement and ductility in a dilute Al-Sc alloy. Acta Materialia, 49, (18), 3829-3838. (doi:10.1016/S1359-6454(01)00262-2).

Furukawa, Minoru, Horita, Zenji and Langdon, Terence G. (2001) Achieving superplasticity and superplastic forming through severe plastic deformation. In, Materials Research Society Fall Meeting 2000: Symposium B, Boston, USA, 27 Nov - 01 Dec 2000. , B8.5.1-B8.5.12.

Gao, N., Dwyer-Joyce, R.S. and Grieve, D.G. (2001) Disc machine testing to assess the life of surface-damaged railway track. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 215, (4), 261-275.

Gratton, G.B. (2001) The weightshift-controlled microlight aeroplane. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 215, (3), 147-154. (doi: 10.1243/0954410011533130).

Gregson, P.J. and Browne, M. (2001) Lifetime predictions for orthopaedic implants. In, Holford, K.M., Brandon, J.A., Dulieu-Barton, J.M., Gilchrist, M.D. and Worden, K. (eds.) Damage Assessment of Structures IV. 4th International Conference, DAMAS , Trans Tech, 383-394. (Key Engineering Materials, 205 293-294).

Gregson, R.K., Petley, G.W., Yonge, C., Peebles, A., Browne, M., Clough, J.B. and Warner, J.O. (2001) Development and assessment of a system to quantify paediatric chest physiotherapy techniques. In, 2001 Congress of the Chartered Society of Physiotherapy, Birmingham, UK, 2001. , 23.

Griffin, I., Schroder, P., Chipperfield, A. and Fleming, P. (2001) Multiobjective optimisation approach to robust controller design. In, Verbruiggen, H., Chan, C.W. and Vingerhoeds, R.A. (eds.) New Technologies for Computer Control. First IFAC Conference on New Technologies for Computer Control Oxford, UK, Elsevier, 111-116. (IFAC Proceedings).

Griffiths, G., Davis, R., Erikson, C.P., Frye, P., Marchand, T., Dickey, T. and Weller, R. (2001) Towards new platform technology for sustained observations. In, Koblinsky, C.J. and Smith, N.R. (eds.) Observing the Ocean for Climate in the 21st Century. First International Conference on Ocean Observations for Climate (OCEANOBS99) Melbourne, Australia, GODAE Project Office/Bureau of Meteorology, 324-337.

Griffiths, G., Enoch, P. and Millard, N.W. (2001) On the radiated noise of the Autosub autonomous underwater vehicle. ICES Journal of Marine Science, 58, (6), 1195-2000. (doi:10.1006/jmsc.2001.1120).

Griffiths, G., Fielding, S. and Roe, H.S.J. (2001) Some observations of biophysical interaction in the ocean using high frequency acoustics. Proceedings of Institute of Acoustics, 23, 189-195.

Griffiths, G., Millard, N., Mcphail, S.D., Stevenson, P., Brierley, A.S., Fernandes, P.G., Smeed, D.A., Stansfield, K., Thorpe, S.A., Osborn, T., Farmer, D.M., Statham, P.J., Connelly, D.P., German, C.R., Cunningham, A. and Burkill, P. (2001) Standard and special: Sensors used during the Autosub Science Missions programme. In, Proceedings of the AUSI Sensors Workshop, Miami, 4 Apr 2001, Miami FL, USA. AUSI Sensors Workshop Miami FL, USA, Autonomous Undersea Systems Institute, [17p].

Griffiths, G., Millard, N., Mcphail, S.D., Stevenson, P., Pebody, M., Perrett, J. and Webb, A. (2001) Multidisciplinary measurements with the Autosub Autonomous Underwater Vehicle. In, Hydro 2001 Proceedings, 27-29 March 2001, University of East Anglia, Norwich, UK. Hydro 2001 London, Hydrographic Society, 5/1-5/8. (Hydrographic Society Special Publication 42).

Grooves, Steve, Symonds, Nicola, Wood, Robert and Mellor, Brian (2001) Impact testing of downhole tubing internal coatings. NACE 2001, Houston, USA, 11 - 16 Mar 2001. USA, National Association of Corrosion Engineers (NACE)8pp.

Guerts, B., Vreman, B., Kuerten, H. and Luo, K.H. (2001) Level-set dynamics and mixing efficiency of passive and active scalars in DNS and LES of turbulent mixing layers. In, Linborg, L. (ed.) Proceedings of Second International Symposium on Turbulence and Shear Flow Phenomena. Second International Symposium on Turbulence and Shear Flow Phenomena , Kluwer, 187-92.

Habbab, H., Syngellakis, S. and Mellor, B.G. (2001) Assessment of the reliability of instrumented micro-indentation data. In, University of Southampton School of Engineering Sciences Postgraduate Conference, Southampton, UK, 2001. , 35-6.

Hammond, Joseph K. and Waters, Timothy P. (2001) Signal processing for experimental modal analysis. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 359, (1778), 41-59. (doi:10.1098/rsta.2000.0713).

Hearn, G.E., Veldhuis, I.J.S., Veer, R. van't and Steenbergen, R.J. (2001) Conceptual design investigation of a very high speed transpacific container vessel. In, Proceedings of FAST 2001. 6th International Conference on Fast Sea Transportation (FAST 2001) London, UK, The Royal Institution of Naval Architects, 81-107.

Hiett, B.P., Generowicz, J.M., Cox, S.J., Molinari, M., Beckett, D., Parker, G.J. and Thomas, K.S. (2001) Finite element modelling of photonic crystals. In, PREP 2001: Third conference on postgraduate research in electronics, photonics, communications and software : 9-11 April 2001,University of Keele, UK. , Engineering and Physical Sciences Research Council, 87-88.

Hiett, B.P., Generowicz, J.M., Cox, S.J., Molinari, M., Beckett, D.H., Parker, G.J. and Thomas, K.S. (2001) Finite element modelling of photonic crystals. In, EPSRC PREP 2001 Conference, Keele, UK, 09 - 11 Apr 2001. Swindon, UK, Engineering and Physical Sciences Research Council (EPSRC), 87-88.

Hill, M., McBride, J.W., Zhang, D. and Loh, J. (2001) Computer aided error analysis for a three-dimensional precision surface mapping system. In, Peggs, G.N. (ed.) Laser Metrology & Machine Performance V. Lamdamap 2001: Fifth International Conference on Laser Metrology, and Machine Tool performance Southampton, UK, WIT Press, 279-288. (Transactions on Engineering Sciences 34). (doi:10.2495/LAMDAMAP010251).

Hirdaris, S.E., Price, W.G. and Temarel, P. (2001) Symmetric and antisymmetric hydroelastic analysis of a bulker in waves. In, Proceedings of the 8th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2001), Shanghai, China, 16 - 21 Sep 2001. , 903-910.

Hiroki, Akamatsu, Fujinami, Takayoshi, Horita, Zenji and Langdon, Terence G. (2001) Influence of rolling on the superplastic behavior of an Al-Mg-Sc alloy after ECAP. Scripta Materialia, 44, (5), 759-764. (doi:10.1016/S1359-6462(00)00666-7).

Hjalmarsson, H. and Veres, S. (2001) Robust loopshaping using iterative feedback tuning. In, Proceedings of the European Control Conference, Porto, Portugal, Sep 2001. , 2046-2051.

Horita, Z., Fujinami, T., Nemoto, M. and Langdon, T.G. (2001) Improvement of mechanical properties for Al alloys using equal-channel angular pressing. Journal of Materials Processing Technology, 117, (3), 288-292. (doi:10.1016/S0924-0136(01)00783-X).

Horita, Z., Fujinami, T., Sato, K., Kang, S.B., Kim, H.W. and Langdon, T.G. (2001) Microstructures and mechanical properties of aluminum alloys processed by equal-channel Aagular pressing. In, Tiryakioglu, M. (ed.) Advances in the Metallurgy of Aluminum Alloys. James T. Staley Honorary Symposium on Aluminum Alloys , ASM, 271-275.

Horita, Z., Furukawa, M., Nemoto, M. and Langdon, T.G. (2001) Microstructural control using equal-channel angular pressing. Netsu-shori (Journal of The Japan Society for Heat Treatment), 41, 68-74.

Horita, Z., Lee, S., Ota, S., Neishi, K. and Langdon, T.G. (2001) Equal-channel angular pressing as a production tool for superplastic materials. In, Chandra, Namas (ed.) Superplasticity in Advanced Materials - ICSAM-2000. International Conference on Superplasticity in Advanced Materials (ICSAM-2000) Switzerland, Trans Tech, 471-476. (Materials Science Forum 357-359).

Hu, Z. and Sandham, N.D. (2001) Large domain simulations of plane Comette and Poiseuille flow. In, Proceedings of the 2nd International Symposium on Turbulence and Shear Flow Phenomena (TSFP 2), Stockholm, Sweden, Jun 2001. , 377-382.

Hu, Z.W., Morfey, C.N.D. and Sandham, N.D. (2001) Aeroacoustics of wall-bounded turbulent flows. In, 7th AIAA/CEAS Aeroacoustics Conference and Exhibit. Collection of technical papers. 7th AIAA/CEAS Aeroacoustics Conference and Exhibit USA, American Institute of Aeronautics and Astronautics, 1-11.

Hudson, Dominic A., Molland, A.F., Price, W.G. and Temarel, P. (2001) Seakeeping performance of high speed catamaran vessels in head and oblique waves. In, Wilson, Philip A. (ed.) FAST 2001: Sixth International Conference on Fast Sea Transportation. FAST 2001: Sixth International Conference on Fast Sea Transportation London, UK, The Royal Institution of Naval Architects, 247-257. (1124).

Hunt, J.C.R., Sandham, N.D., Vassilicos, J.C.V., Launder, B.E., Monkewitz, P.A. and Hewitt, G.F. (2001) Developments in turbulence research: a review based on the 1999 Programme of the Isaac Newton Institute, Cambridge. Journal of Fluid Mechanics, 436, 353-391. (doi:10.1017/S002211200100430X).

Jeffrey, David, Zhang, Xin and Hurst, David W. (2001) Some aspects of the aerodynamics of Gurney flaps on a double-element wing. Journal Fluids Engineering: Transactions of the ASME, 123, (1), 99-104. (doi: 10.1115/1.1334376).

Jeong, H.K. and Shenoi, R.A. (2001) Structural reliability of fibre reinforced composite plates. RINA Transactions Part B, 143, 73-98.

Jiang, L., Fitzgerald, A.G. and Rose, M.J. (2001) Surface morphology studies on carbon nitride films prepared by rf magnetron sputtering. In, Aindow, M. and Kiely, C.J. (eds.) Electron Microscopy and Analysis 2001. EMAG2001: Electron Microscopy and Analysis Group Conference , Taylor & Francis, 85-89. (Institute of Physics Conference Series, 168).

Jiang, Liudi, Fitzgerald, A.G. and Rose, M.J. (2001) The effect of postdeposition annealing on chemical bonding in amorphous carbon nitride films prepared by DC magnetron sputtering. Applied Surface Science, 181, (3-4), 331-338. (doi:10.1016/S0169-4332(01)00427-5).

Jiang, X. and Luo, K.H. (2001) Direct numerical simulation of the near field dynamics of a rectangular reactive plume. International Journal of Heat and Fluid Flow, 22, (6), 633-642. (doi: 10.1016/S0142-727X(01)00123-0).

Jiang, X. and Luo, K.H. (2001) Direct numerical simulation of transitional noncircular buoyant reactive jets. Theoretical and Computational Fluid Dynamics, 15, (3), 183-198. (doi:10.1007/PL00013288).

Jiang, X. and Luo, K.H. (2001) Dynamics of transitional noncircular buoyant reactive jets with side-wall effects. In, Guerts, Bernard J., Friedrich, Rainer and Métais, Olivier (eds.) Direct and Large-Eddy Simulation IV. DLES4: 4th International ERCOFTAC Workshop on Direct and Large-Eddy Simulation The Netherlands, Kluwer Academic, 189-196. (ERCOFTAC Series 8).

Jiang, X. and Luo, K.H. (2001) Mixing and entrainment of transitional noncircular buoyant reactive plumes. Flow, Turbulence and Combustion, 67, (1), 57-79. (doi:10.1023/A:1013539806013).

Jiang, X. and Luo, K.H. (2001) Spatial DNS of flow transition of a rectangular buoyant reacting free jet (in special issue on Second International Symposium on Turbulence and Shear Flow Phenomena). Journal of Turbulence, 2, (15), 1-18. (doi:10.1088/1468-5248/2/1/015).

Jin, H. and McLean, D. (2001) Design of a state feedback controller to achieve minimum eigenvalue differential sensitivity. Transactions of the Institute of Measurement and Control, 23, (2), 127-138.

Karayiannis, T. and Molland, A.F. (2001) A decision making model for alternative high-speed ferries. In, Proceedings of Sixth International Conference on Fast Sea Transportation (FAST 2001). Sixth International Conference on Fast Sea Transportation (FAST 2001) London, UK, Royal Institution of Naval Architects (RINA), 1-11.

Karpov, E.G., Dorofeev, D.L. and Stephen, N.G. (2001) Characteristic deformation spectrum of repetitive beam-like trusses. In, Sixth US National Congress on Computational Mechanics, Dearborn, USA, 01 - 04 Aug 2001. , 598.

Karpov, E.G., Dorofeev, D.L. and Stephen, N.G. (2001) On the characteristic deformation spectrum of repetitive beam-like lattices. In, Mechanics and Materials Conference (McMAT) 2001, San Diego, USA, Jun 2001.

Keane, A.J. (2001) An introduction to evolutionary computing in design search and optimisation. In, Kallel, Leila, Naudts, Bart and Rogers, Alex (eds.) Theoretical aspects of evolutionary computing. , Springer, 1-11. (Natural Computing Series).

Keane, A.J. and Nair, P.B. (2001) Problem solving environments in aerospace design. Advances in Engineering Software, 32, (6), 477-487. (doi:10.1016/S0965-9978(00)00108-3).

Keary, A.C., Syngellakis, S. and Bowen, R.J. (2001) Experimental and analytical study of thermal stresses during pipe freezing. Proceedings of the Institution of Mechanical Engineers. Part E: Journal of Process Mechanical Engineering, 215, (1), 63-77. (doi:10.1243/0954408011530307).

Kerridge, D.H. and Berg, R.W. (2001) Nyt lys pa storknede eutektiske saltblandingers struktur. Dansk Kemi, 82, 16-19.

Kerridge, D.H. and Berg, R.W. (2001) Structures of sloid salt eutectics unsing the Raman microscope. In, Proceedings of 6th International Conference on Molten Salt Chemistry & Technology, Shanghai, China, 08 - 13 Aug 2001.

Kesner, Keith, Hill, Martyn, McHugh, John and Turner, John D. (2001) Cross-sectional modes in the impact-echo assessment of concrete structures. Journal of Structural Engineering, 127, (5), 595-597. (doi: 10.1061/(ASCE)0733-9445(2001)127:5(595)).

Kim, Sanghee, Hall, Wendy and Keane, Andy (2001) Using document structures for personal ontologies and user modelling. In, Proceedings of User Modeling 2001: 8th International Conference, UM 2001. User Modeling 2001: 8th International Conference (UM 2001) London, UK, Springer, 240-242. (Lecture Notes in Computer Science 2109).

Komura, S., Furukawa, M., Horita, Z., Nemoto, M. and Langdon, T.G. (2001) Optimizing the procedure for equal-channel angular pressing for maximum superplasticity. Materials Science and Engineering: A, 297, (1-3), 111-118. (doi:10.1016/S0921-5093(00)01255-7).

Ku, C.H., Browne, M., Gregson, P.J. and Pioletti, D.P. (2001) Biocompatibility tests of different Ti6Al4V surface treatments. In, 16th Conference of the European Society for Biomaterials, London, UK, 12 - 14 Sep 2001. , T17.

Lai, H. and Yan, Y.Y. (2001) The effect of choosing dependent variables and cell-face velocities on convergence of the SIMPLE algorithm using non-orthogonal grids. International Journal of Numerical Methods for Heat & Fluid Flow, 11, (6), 524-546. (doi:10.1108/EUM0000000005667).

Langdon, T.G. (2001) Creep of single-phase alloys. In, Buschow, K.H.J., Cahn, R.W., Flemings, M.C., Ilschner, B., Kramer, E.J. and Mahajan, S. (eds.) Encyclopedia of materials: science and technology. , Elsevier, 1817-1822.

Langdon, T.G. (2001) The principles of high temperature flow in metal matrix composites. In, Proceedings of the 16th Symposium on Structures and Materials in Space Engineering, Sagamihara, Japan, 2001. , 1-4.

Langdon, Terence G, Furukawa, Minoru, Nemoto, Minoru and Horita, Zenji (2001) Using severe plastic deformation for grain refinement and superplasticity. In, Chandra, Namas (ed.) Superplasticity in Advanced Materials - ICSAM-2000. International Conference on Superplasticity in Advanced Materials (ICSAM-2000) Switzerland, Trans Tech, 489-498. (Materials Science Forum 357-359).

Lawal, A.A. and Sandham, N.D. (2001) Direct simulation of transonic flow over a bump. In, Geurts, B.J., Friedrich, Rainer and Métais, Olivier (eds.) Direct and large-eddy simulation IV. , Springer, 301-310. (ERCOFTAC Series 8).

Leary, S.J., Voutchkov, I., Bhaskar, A. and Keane, A.J. (2001) The use of multifidelity approximations in engineering design. In, Waltrup, P.J. (ed.) Proceedings of the 15th International Symposium on Air Breathing Machines. 15th International Symposium on Air Breathing Machines (ISABE XV) Reston, USA, American Institute of Aeronautics and Astronautics.

Leary, Stephen J., Bhaskar, Atul and Keane, Andy J. (2001) A constraint mapping approach to the structural optimization of an expensive model using surrogates (in special issue on surrogate modelling and space mapping for engineering optimization). Optimization and Engineering, 2, (4), 385-398. (doi:10.1023/A:1016038305014).

Lee, K.K., Harris, C.J., Gunn, S.R. and Reed, P.A.S. (2001) Approaches to imbalanced data for classification: a case study. In, Proceedings of the International ICSC Congress on Computational Intelligence: Methods & Applications. International ICSC Congress on Computational Intelligence: Methods & Applications (CIMA 2001) Millet, Canada, ICSC Interdisciplinary Research.

Lee, K.K., Harris, C.J., Gunn, S.R. and Reed, P.A.S. (2001) A case study of SVM extension techniques on classification of imbalanced data. In, International Conference on Neural Networks and Applications, Puerto de la Cruz, Spain, , 309-314.

Lee, K.K., Harris, C.J., Gunn, S.R. and Reed, P.A.S. (2001) Classification of imbalanced data with transparent kernel. In, Proceedings of IJCNN '01. International Joint Conference on Neural Networks, 2001. IJCNN '01. International Joint Conference on Neural Networks, 2001 Piscataway, USA, Institute of Electrical and Electronics Engineers, 2410-2415. (doi:10.1109/IJCNN.2001.938744).

Lee, K.K., Harris, C.J., Gunn, S.R. and Reed, P.A.S. (2001) Control sensitivity SVM for imbalanced data a case study on automotive material. In, 5th International Conference on Artificial Neural Networks and Genetic Algorithms (ICANNGA 2001), Prague, Czech Republic, 22 - 25 Apr 2001. 4pp.

Lee, K.K., Harris, C.J., Gunn, S.R. and Reed, P.A.S. (2001) Regression models for classification to enhance interpretability. In, Proceedings of the 3rd international conference on intelligent processing and manufacturing of materials (IPMM). 3rd International Conference Intelligent Processing and Manufacturing of Materials , Intelligent Processing and Manufacturing of Materials.

Lee, S., Akamatsu, H., Utsunomiya, A., Neishi, K., Furukawa, M., Horita, Z. and Langdon, T.G. (2001) Superplasticity of ultrafine-grained Al-Mg-Sc-Zr alloys produced by equal-channel angular pressing. In, Chandra, T., Higashi, K., Suryanarayana, C. and Tome, C. (eds.) THERMEC 2000 - International Conference on Processing and Manufacturing of Advanced Materials. International Conference on Processing and Manufacturing of Advanced Materials Oxford, UK, Elsevier.

Lee, S., Furukawa, M., Horita, Z. and Langdon, T.G. (2001) Improving the superplastic properties of an aluminum alloy using equal-channel angular pressing. In, The 2nd International Conference on Light Metals for Transportation Systems, Pusan, Korea, 06 - 10 May 2001. Pohang, Korea, Pohang University of Science and Technology, 399-404.

Lee, Sang Mok and Langdon, Terence G. (2001) High strain rate superplasticity in a Zn-22% Al Alloy after equal-channel angular pressing. In, Chandra, Namas (ed.) Superplasticity in Advanced Materials - ICSAM-2000. International Conference on Superplasticity in Advanced Materials (ICSAM-2000) Switzerland, Trans Tech, 321- 326. (Materials Science Forum 357-359).

Lee, Sang-Joon and Lim, Hee-Chang (2001) A numerical study on flow around a triangular prism located behind a porous fence. Fluid Dynamics Research, 28, (3), 209-221. (doi:10.1016/S0169-5983(00)00030-7).

Lewis, H.G. (2001) Modifications to SDS source code for medium-term risk analysis for satellite constellations. Southampton, UK, School of Engineering Sciences, University of Southampton (Aeronautics and Astronautics Technical Report, (AA-HGL-08022001) ).

Lewis, H.G. and Brown, M. (2001) A generalized confusion matrix for assessing area estimates from remote sensing imagery. International Journal of Remote Sensing, 22, (16), 3223-3235. (doi:10.1080/01431160152558332).

Lewis, H.G., Swinerd, G.G., Williams, N. and Gittins, G. (2001) DAMAGE: a dedicated GEO debris model framework. In, Proceedings of the Third European Conference on Space Debris. 3rd European Conference on Space Debris Noordwijk, Netherlands, The European Space Agency (ESA), 373-378. (European Space Agency Special Publication 473).

Lewis, H.G., Swinerd, G.G., Williams, N. and Gittins, G. (2001) Investigating the long-term evolution of the debris environment in high Earth orbit using the DAMAGE model. In, 52nd International Astronautical Congress, Toulouse, France, 01 - 05 Oct 2001. 8pp.

Li, X.-M. and Starink, M.J. (2001) The effect of compositional variations on characteristics of coarse intermetallic particles in overaged 7000 aluminium alloys. Materials Science and Technology, 17, (11), 1324-1328.

Limbert, G. and Taylor, M. (2001) An explicit three dimensional finite element model of an incompressible tranversely isotropic hyperelastic material: application to the study of the human ACL ligament. In, Bathe, K.J. (ed.) Proceedings of the First MIT Conference on Computational Fluid and Solid Mechanics. The First MIT Conference on Computational Fluid and Solid Mechanics Cambridge, UK, Elsevier, 319-322.

Limbert, G. and Taylor, M. (2001) Three dimensional finite element model of the anterior cruciate ligament: influence of the initial strain field. In, Jones, M.L., Middleton, J., Pande, G.N. and Shrive, N.G. (eds.) Computer Methods in Biomechanics and Biomedical Engineering. Fourth International Symposium on Computer Methods in Biomechanics and Biomedical Engineering Oxford, UK, Taylor & Francis.

Liu, J., Mwanza, M.C., Reed, P.A.S. and Syngellakis, S. (2001) Assessment of local elastic-plastic properties in an aluminium bearing alloy. In, Proceedings of the Seventh Postgraduate Conference in Engineering Materials, Southampton, UK, 2000. Southampton, UK, University of Southampton2pp, 7-8.

London, A.P., Ayón, A.A., Epstein, A.H., Spearing, S.M., Harrison, T, Peles, Y. and Kerrebrock, J.L. (2001) Microfabrication of a high pressure bipropellant rocket engine. Sensors and Actuators A: Physical, 92, (1-3), 351-357. (doi: 10.1016/S0924-4247(01)00571-4).

Lou, B.Y., Wang, T.D., Huang, J.C. and Langdon, T.G. (2001) On the activation energies observed in Al-based materials deformed at ultrahigh temperatures. In, Chandra, Namas (ed.) Superplasticity in Advanced Materials - ICSAM-2000. 2000 International Conference on Superplasticity in Advanced Materials (ICSAM-2000) Switzerland, Trans Tech, 545-550. (Materials Science Forum 357-359).

Luo, K.H. (2001) DNS and LES of Turbulence-Combustion Interactions. In, Geurts, Bernard J. (ed.) Modern simulation strategies for turbulent flow. , R.T. Edwards, 263-295.

Luo, K.H., Geurts, B.J. (ed.) (2001) DNS and LES of turbulence-combustion interactions. ERCOFTAC Bulletin, (48), 46-49.

Luo, K.H. (2001) Some recent findings on turbulent diffusion flames from DNS. Zeitschrift für Angewandte Mathematik und Mechanik - Journal of Applied Mathematics and Mechanics, 81, S545-S546.

Luo, K.H. and Zhou, X. (2001) Large-eddy simulation of variable-density turbulent flows impinging on wall plates and cavity enclosures. In, Geurts, Bernard J., Friedrich, Rainer and Métais, Olivier (eds.) Direct and Large-Eddy Simulation IV. DLES4: 4th International ERCOFTAC Workshop on Direct and Large-Eddy Simulation The Netherlands, Kluwer Academic, 245-252. (ERCOFTAC Series 9). (2614).

Manganelli, P. and Wilson, P.A. (2001) Measurements of slamming on yacht structures. In, 15th Chesapeake Sailing Yacht Symposium, Chesapeake, USA, 2001. Chesapeake, USA, , 79-88.

Markvart, T. (2001) Solar electricity for the third millennium (feature article). Photovoltaics Bulletin: Elsevier Advanced Technology, (1), 7-11.

Martin, C., Lewis, H.G. and Walker, R. (2001) Studying the MEO and GEO space debris environments with the integrated debris evolution suite (IDES) model. In, Proceedings of the Third European Conference on Space Debris. 3rd European Conference on Space Debris Noordwijk, Netherlands, The European Space Agency (ESA), 351-354. (European Space Agency Special Publication 473).

Matsubara, K., Utsunomiya, A., Furukawa, M., Horita, Z. and Langdon, T.G. (2001) Superplasticity of aluminum alloys containing various solid solution elements processed using equal-channel angular pressing. In, Hanada, S., Zhong, Z., Nam, S.W. and Wright, R.N. (eds.) The Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). Fourth Pacific Rim International Conference on Advanced Materials and Processing Sendai, Japan, Japan Institute of Metal, 2003-2006. (2905).

Maul, C., McBride, J.W. and Swingler, J. (2001) Intermittency phenomena in electrical connectors. IEEE Transactions on Components and Packaging Technologies, 24, (3), 370-377. (doi:10.1109/6144.946482).

Maul, Christian (2001) Intermittent electrical discontinuities in tin-plated automotive contacts. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

McBride, J.W. (2001) A review of volumetric erosion studies in low voltage electrical contacts. IEICE technical report. EMD, 101, (326), 1-8.

McBride, J.W., Hill, M., Loh, J. and Zhang, D. (2001) Sensitivity of a 3-D surface mapping system to environmental perturbations. In, Peggs, G.N. (ed.) Laser Metrology & Machine Performance V. Southampton, UK, WIT Press, 187-195. (Transactions on Engineering Sciences 34). (doi:10.2495/LAMDAMAP010171).

McBride, J.W. and Weaver, P.M. (2001) Review of arcing phenomena in low voltage current limiting circuitbreakers. IEE Proceedings - Science, Measurement and Technology, 148, (1), 1-7. (doi:10.1049/ip-smt:20010185).

McDonald, P.C. (2001) Cryogenically cooled amplifiers for deep space communication. University of Southampton, Faculty of Engineering, Science and Mathematics, School of Engineering Sciences, Doctoral Thesis , 260pp.

McLean, D. (2001) Controllable factors in aviation safety. Measurement and Control, 34, 14-18.

Mcbride, J.W., Pechrach, K. and Weaver, P.M. (2001) Arc root commutation from moving contacts in low voltage devices. IEEE Transactions on Components and Packaging Technologies, 24, (3), 331-336. (doi:10.1109/6144.946475).

Meers, S.D., Leighton, T.G., Clarke, J.W.L., Heald, G.J., Dumbrell, H.A. and White, P.R., Leighton, T.G., Heald, G.J., Griffiths, H. and Griffiths, G. (eds.) (2001) The importance of bubble ring-up and pulse length in estimating the bubble distribution from propagation measurements. Proceedings of the Institute of Acoustics: Acoustical Oceanography, 23, (2), 6pp.

Meunier, M. and Shenoi, R.A. (2001) Dynamic analysis of composite sandwich plates with damping modelled using high-order shear deformation theory. Composite Structures, 54, (2-3), 243-254. (doi: 10.1016/S0263-8223(01)00094-0).

Meunier, M. and Shenoi, R.A., Wilson, P.A. and Hearn, G.E. (eds.) (2001) Transient analysis of FRP sandwich panels used in High Performance Craft. Proceedings of the 6th International Conference on Fast Sea Transportation, FAST2001, Southampton, 3 (doi:10.3940/rina.ft.2001.74).

Meurers, T. and Veres, S.M. (2001) FSF based feedback control with online secondary path estimation. In, Proceedings of Internoise 2001, Rome, Italy, 02 - 07 Sep 2001. , 815-820.

Meurers, T. and Veres, S.M. (2001) Further results on the iterative design for noise attenuation. International Journal of Acoustics and Vibration, 6, (4), 219-225.

Meurers, T. and Veres, S.M. (2001) A model free frequency domain self-tuner for active sound and vibration control. In, 8th International Conference on Sound and Vibration, Hong Kong, 2001. ICSV, 207-214.

Mirazo, José M. and Spearing, S. Mark (2001) Damage modeling of notched graphite/epoxy sandwich panels in compression. Applied Composite Materials, 8, (3), 191-216. (doi: 10.1023/A:1011272028561).

Molinari, M., Blott, B.H., Cox, S.J. and Daniell, G.J. (2001) Non-linear electrical tomography reconstruction of simple test objects and a simulated head slice. In, Proceedings of the 3rd EPSRC Engineering Network Meeting on Biomedical Applications of EIT, London, UK, 2001. , 26.

Molinari, M., Cox, S.J., Blott, B.H. and Daniell, G.J. (2001) Adaptive mesh refinement techniques for electrical impedance tomography. Physiological Measurement, 22, (1), 91-96. (doi:10.1088/0967-3334/22/1/312).

Molinari, M., Cox, S.J., Blott, B.H. and Daniell, G.J. (2001) Efficient non-linear 3D electrical tomography reconstruction. In, 2nd World Congress on Industrial Process Tomography, Hannover, Germany, 29 - 31 Aug 2001. Virtual Centre for Industrial Process Tomography, ISBN: 0 85316 2247, 424-432.

Molinari, M., Cox, S.J., Blott, B.H. and Daniell, G.J. (2001) Optimal finite element modelling and efficient reconstruction in non-linear 3D electrical resistance tomography. In, Proceedings of the 3rd EPSRC Engineering Network Meeting on Biomedical Applications of EIT, London, UK, 2001. 5pp, 41-45.

Molinari, M., Fangohr, H., Generowicz, J. and Cox, S.J. (2001) Finite element optimizations for efficient non-linear electrical tomography reconstruction. In, Proceedings of the 2nd World Congress on Industrial Process Tomography, Hanover, Germany, 29 - 31 Aug 2001. Virtual Centre for Industrial Process Tomography, ISBN: 0 85316 2247, 406-417.

Molinari, Marc, Cox, Simon J., Blott, Barry H. and Daniell, Geoffrey J., Fischer, G. and Roithinger, F.X. (eds.) (2001) Efficient non-linear 3D electrical tomography and finite element optimizations for functional source imaging. Biomedizinische Technik / Biomedical Engineering, 46, (E2), 130-131.

Molland, A.F., Wellicome, J.F., Temarel, P., Cic, J. and Taunton, D.J. (2001) Experimental investigation of the seakeeping characteristics of fast displacement catamarans in head and oblique seas. Transactions of the Royal Institution of Naval Architects, 143, 78-97.

Molland, A.F., Wilson, P.A. and Taunton, D.J. (2001) A systematic series of experimental wash wave measurements for high speed displacement monohull and catamaran forms in shallow water. Southampton, UK, University of Southampton, 194pp. (Ship Science Reports, (122) ).

Molland, A.F., Wilson, P.A., Turnock, S.R., Taunton, D.J.S. and Chandraprabha, S, Wilson, P. A. (ed.) (2001) The prediction of the characteristics of ship generated near field wash waves. Proceedings of 6th International Conference on fast sea transportation, FAST2001, 1, 149-164. (doi:10.3940/rina.ft.2001.15).

Morfey, C.L. and Tan, M. (2001) Unsteady drag on a cylinder due to transverse oscillation at finite amplitude. Journal of Sound and Vibration, 246, (4), 705-721. (doi:10.1006/jsvi.2001.3695).

Mowlem, Matthew C., Chambers, Alan and Dakin, John P. (2001) Development of sensor technology to facilitate in-situ measurement of damage in composite materials for spacecraft applications. In, Wilson, Alan R. and Asanuma, Hiroshi (eds.) Smart Materials. Bellingham, USA, International Society for Optical Engineering, 144-151. (Proceedings of SPIE, 4234). (doi:10.1117/12.424400).

Mwanza, M.C., Liu, J., Reed, P.A.S. and Syngellakis, S. (2001) Microstructural characterisation of fatigue in novel plain bearing alloys. In, Proceedings of the Seventh Postgraduate Conference in Engineering Materials, Southampton, UK, 2001. , 11-12.

Nair, P.B., Choudhury, A. and Keane, A.J. (2001) Some greedy algorithms for sparse nonlinear regression. In, Brodley, Carla E. and Danylik, Andrea Pohoreckyj (eds.) Proceedings of the Eighteenth International Conference on Machine Learning. Eighteenth International Conference on Machine Learning San Francisco, USA, Morgan Kaufmann, 369-376.

Nair, Prasanth B. (2001) On the theoretical foundations of stochastic reduced basis methods. In, Proceedings of the 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference and Exhibition. 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference and Exhibition Reston, USA, American Institute of Aeronautics and Astronautics, 1677.

Nair, Prasnath B. and Keane, Andrew J. (2001) Passive vibration suppression of flexible space structures via optimal geometric redesign. AIAA Journal, 39, (7), 1338-1346.

Nayak, A.K., Shenoi, R.A. and Moy, S.S.J. (2001) Modelling damping effects in sandwich structures using the finite element method. In, International Conference on Theoretical, Applied, Experimental and Computational Mechanics, Kharagpur, India, 27 - 30 Dec 2001. 10pp.

Nefti, K. and Coleman, G.N. (2001) Assessment of selected turbulence models for a suddenly decelerated wall-bounded shear flow. Southampton, UK, University of Southampton, 7pp. (Aeronautics and Flight Mechanics (AFM), (AFM-01/02) ).

Neishi, K., Fujinami, T., Oh-ishi, K., Horita, Z. and Langdon, T.G. (2001) Superplasticity in Cu-Zn-Zr alloys processed by equal-channel angular pressing. In, Hanada, S., Zhong, Z., Nam, S.W. and Wright, R.N. (eds.) The Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). Sendai, JP, Japan Institute of Metals, 2007-2010.

Neishi, K., Horita, Z. and Langdon, T.G. (2001) Achieving superplasticity in a Cu-40% Zn alloy through severe plastic deformation. Scripta Materialia, 45, (8), 965-970. (doi:10.1016/S1359-6462(01)01119-8).

Neishi, K., Uchida, T., Yamauchi, A., Nakamura, K., Horita, Z. and Langdon, T.G. (2001) Low-temperature superplasticity in a Cu-Zn-Sn alloy processed by severe plastic deformation. Materials Science and Engineering, 307, (1-2), 23-28. (doi:10.1016/S0921-5093(00)01970-5).

Newman, S. (2001) Book review. Brassey's World Military Technology: Military Rotorcraft, Second Edition. P. Thicknesse, A. Jones, K. Knowles, M. Kellett, A. Mowat and M. Edwards, Brassey's, Chrysalis Books Limited (Batsford), London: 2000, 160pp, £35 (ISBN 1 857 533259). Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 215, (4), 253-255. (doi:10.1243/0954410011533239).

Newman, S.J. (2001) The helicopter: how it flies. In, Ballantyne Symposium, Royal Aeronautical Society, London, UK, Jan 2001. (Submitted).

Newman, S.J. (2001) Safety implications of helicopter blade sailing. In, Institute of Measurement & Control Symposium, Controlling Aviation Safety, Winchester, UK, 21 - 22 Nov 2001. (Submitted).

Newman, Simon (2001) The foundations of helicopter flight, Halsted Press

Newman, Simon, Brown, Richard, Perry, John, Lewis, Steven, Orchard, Matthew and Modha, Ajay (2001) Comparative numerical and experimental investigations of the vortex ring phenomenon in rotorcraft. In, American Helicopter Society, 57TH Annual Forum, Washington DC, USA, 09 - 11 May 2001. USA, American Helicopter Society International21pp.

Ng, Whui Liang (2001) Unified numerical predictions of free buring arc propoerties in nitrogen. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Oh-ishi, Keiichiro, Horita, Zenji, Smith, David J. and Langdon, Terence G. (2001) Grain boundary structure in Al-Mg and Al-Mg-Sc alloys after equal-channel pressing. Journal of Materials Research, 16, 583-589.

Osborne, J.J., Harris, I.L., Roberts, G.T. and Chambers, A.R. (2001) Satellite and rocket-borne atomic oxygen sensor techniques. Review of Scientific Instruments, 72, (11), 4025-4041. (doi:10.1063/1.1406928).

Pahutov, M., Sklenicka, V., Kucharov, K., Svoboda, M. and Langdon, T.G. (2001) High temperature creep resistance in magnesium alloys and their composites. In, Parker, D.J. (ed.) Creep and fracture of engineering materials and structures: proceedings of the 9th international conference. 9th International Conference on Creep and Fracture of Engineering Materials and Structures Abington, UK, Woodhead, 153-172.

Palissery, V., Taylor, M. and Browne, M. (2001) Characterisation of static and fatigue behaviour of a polyurethane foam material to model cancellous bone. In, Conference of European Society for Biomaterials 2001, London, UK, 12 - 14 Sep 2001.

Pang, H.T. and Reed, P.A.S. (2001) Effects of microstructural variation on fatigue crack initiation and short crack growth in Ni-base turbine disc alloys. In, EUROMAT 2001 - 7th European Conference on Advanced Materials and Processes. Milan, Italy, Associazione Italiana di Metallurgia.

Pemberton, R., Turnock, S., Wright, A. and Blake, J.I.R. (2001) A comparison of Computational Methods for Planing Craft Hydrodynamics. In, HIPER '01, International Conference on High Performance Marine Vehicles, Hamburg, Germany, 02 - 05 May 2001.

Pemberton, R., Turnock, S.R. and Watson, S.J. (2001) Free surface CFD simulations of the flow around a planing plate. In, Proceedings of the 6th International Conference on Fast Sea Transportation. 6th International Conference on Fast Sea Transportation (FAST 2001) London, UK, Royal Institution of Naval Architects, 321-327.

Perillo-Marcone, A., Ryd, L. and Taylor, M. (2001) Inter-patient evaluation of stresses in proximal implanted tibiae. In, International Society of Biomechanics XVIIIth Congress, Zurich, Switzerland, 08 - 13 Jul 2001. , 382.

Petruzzelli, N. and Keane, A.J. (2001) Wave drag estimation for use with panel codes. Journal of Aircraft: Engineering Notes, 38, (4), 778-782.

Pletcher, D. and Walsh, F.C. (2001) Electrochemistry: Now and the Future. Chemistry and Industry, (18), 564-567.

Powrie, H.E.G., Wood, R.J.K., Harvey, T.J. and Morris, S. (2001) Re-analysis of electrostatic wear-site sensor data from FZG gear scuffing tests. Condition Monitor, 177, 6-12.

Quinn, S., Beaumont, F.R. and Eckersley, J.E. (2001) Preparing Hinkley Point B for a seismic event. Nuclear Engineering International, 46, 38-40.

Quinn, S. and Dulieu-Barton, J.M. (2001) Non-adiabatic behaviour boundaries in thermoelastic stress analysis. In, Proceedings of BSSM Annual Conference on Strain Measurement in the 21st Century, Lancaster, UK, 2001. , 2-4.

Quinn, S. and Dulieu-Barton, Janice M. (2001) Thermoelastic stress analysis of holes in cylindrical shells. In, Wu, Xiaoping, Qin, Yuwen, Fang, Jing and Ke, Jingtang (eds.) Third International Conference on Experimental Mechanics. Bellingham, USA, International Society for Optical Engineering, 194-197. (Proceedings of SPIE, 4537). (doi:10.1117/12.468819).

Rawson, S.A. and McDonald, P.C. (2001) Development of S, X and Ka band Cryogenic Low Noise Amplifiers to Support ESA Deep Space Missions. In, Proceedings of the 2nd ESA Workshop on Tracking Telemetry and Command Systems for Space Applications. 2nd ESA Workshop on Tracking Telemetry and Command Systems for Space Applications (TTC 2001) , European Space Agency, 8.

Reeve, J.S., Scurr, A.D. and Merlin, J.H. (2001) Parallel versions of Stone's strongly implicit algorithm. Concurrency and Computation: Practice and Experience, 13, 1049-1062. (doi: 10.1002/cpe.590).

Ring, D., Shenoi, R.A. and Courts, M. (2001) Application of goal tree - success tree (GTST) technique to decompose ship design in a production context. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215, (1), 79-92.

Robins, Alan, Castro, Ian, Hayden, Paul, Steggal, Nathan, Contini, Daniele and Heist, David (2001) A wind tunnel study of dense gas dispersion in a neutral boundary layer over a rough surface. Atmospheric Environment, 35, (13), 2243-2252. (doi: 10.1016/S1352-2310(01)00072-3).

Robins, Alan, Castro, Ian, Hayden, Paul, Steggel, Nathan, Contini, Daniel, Heist, David and Taylor, T. John (2001) A wind tunnel study of dense gas dispersion in a stable boundary layer over a rough surface. Atmospheric Environment, 35, (13), 2253-2263. (doi:10.1016/S1352-2310(01)00073-5).

Robinson, G.M. and Keane, A.J. (2001) Concise orthogonal representation of supercritical airfoils. Journal of Aircraft, 38, (3), 580-582.

Roques, A., Taylor, M., Thompson, J.I. and Browne, M. (2001) Non-destructive evaluation of fatigue cracks in acrylic bone cement using acoustic emissions. In, European Society for Biomaterials 25th Anniversary Conference, 12 - 14 Sep 2001. London, GB,

Sandham, N.D. (2001) A review of progress on direct and large-eddy simulation. In, Geurts, Bernard J. (ed.) Modern simulation strategies for turbulent flow. , R.T. Edwards, 1-20.

Sandham, N.D., Alam, M. and Morin, S. (2001) Embedded direct numerical simulation for aeronautical CFD. Aeronautical Journal, 105, 193-198.

Sandham, N.D. and Yee, H.C. (2001) Entropy splitting for high order numerical simulation of compressible turbulence. In, Satofuka, Nobuyuki (ed.) Computational Fluid Dynamics 2000: Proceedings of the First International Conference on Computational Fluid Dynamics, ICCFD, Kyoto, Japan, 10-14 July 2000. First International Conference on Computational Fluid Dynamics, ICCFD Germany, Springer, 361-366.

Seddon, John, Newman, Simon and Seddon, Barbara (2001) Basic helicopter aerodynamics. Second edition, Blackwell, 192pp.

Semiatin, S.L., Berbon, P. and Langdon, T.G. (2001) Deformation heating and its effect on grain size evolution during equal channel angular extrusion. Scripta Materialia, 44, (1), 135-140. (doi:10.1016/S1359-6462(00)00565-0).

Senior, Andrea E. and Zhang, Xin (2001) The force and pressure of a diffuser-equipped bluff body in ground effect. Journal of Fluids Engineering: Transactions of the ASME, 123, (1), 105-111. (doi: 10.1115/1.1340637).

Shaheed, M.H., Tokhi, M.O., Chipperfield, A.J. and Azad, A.K.M. (2001) Modelling and open-loop control of a single-link flexible manipulator with genetic algorithms. Journal of Low Frequency Noise, Vibration and Active Control, 20, (1), 39 - 55. (1491).

Shenoi, R.A. (2001) Damage modelling in tee connections in FRP ships. In, Proceedings of the 22nd SAMPE Europe International Conference. 22nd SAMPE Europe International Conference on 'Making a Difference with Innovative Materials and Processes' Paris, France, Society for the Advancement of Material and Process Engineering, 451-464.

Shenoi, R.A. and Wang, R.A. (2001) An analytical solution to the design of tee connections in FRP ships. In, Proceedings of the of the 8th International Symposium on the Practical design of Ships and Mobile Offshore Units (PRADS 2001), Shanghai, China, Sep 2001. , 339-1344.

Shenoi, R.A. and Wang, W. (2001) Flexural behaviour of a curved orthotropic beam on an elastic foundation. The Journal of Strain Analysis for Engineering Design, 36, (1), 1-15.

Shenoi, R.A. and Wang, W. (2001) Theoretical analysis on the bending of curved sandwich beam. In, Proceedings of the 6th International Conference on Deformation and Fracture of Composites (DFC6), Manchester, UK, Mar 2001. , 67-75.

Shenoi, R.A. and Wang, W. (2001) Through-thickness stresses in curved composite laminates and sandwich beams. Composites Science and Technology, 61, (11), 1501-1512. (doi:10.1016/S0266-3538(01)00035-5).

Shi, J., Thomas, T.G. and Williams, J.J.R. (2001) Coarse resolution large-eddy simulation of turbulent channel flows. International Journal of Numerical Methods for Heat and Fluid Flow, 11, (1), 20-35. (doi:10.1108/09615530110364060).

Siew, C.C., Hill, M., Holmes, R. and Brennan, M. (2001) A theoretical and experimental investigation into the vibration response of a flexible rotor and squeeze film damper assembly. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215, (10), 1251-1269. (doi:10.1243/0954406011524649).

Siew, Chan-Cheong (2001) On the non-linear vibration of rotor-squeeze film damper assemblies. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Simoes, J.A., Morias, A., Monteiro, J., Vaz, M.A. and Taylor, M. (2001) Numerical and experimental investigation of bone-implant interfaces. Journal of Biomechanics, 34, (Supplement 1), s85-s86. (doi:10.1016/S0021-9290(01)00129-4).

Simoes, J.A., Vaz, M.A., Blatcher, S. and Taylor, M. (2001) Reply to Letter to the Editor: Influence of head constraint and muscle forces on the strain distribution within the intact femur. Medical Engineering and Physics, 23, (6), 435-436. (doi: 10.1016/S1350-4533(01)00066-2).

Simonin, D., Tatnall, A.R.L. and Robinson, I.S. (2001) A recognition technique for interval wave in SAR images. In, IGARSS 2001: Scanning the Present, Resolving the Future, Sydney, Australia, 09 - 13 Jul 2001.

Sinclair, Ian and Gregson, Peter (2001) Fatigue optimization in aerospace aluminium alloys. In, Cantor, Brian, Assender, Hazel and Grant, Patrick (eds.) Aerospace Materials. Bristol, UK, Institute of Physics, 119-149. (Series in Materials Science and Engineering). (doi: 10.1887/0750307420/b873c12).

Sion, R. and Atkinson, J.K. (2001) A novel low cost sensor for measuring cylinder pressure and improving performance of an internal combustion engine. At 4th International Conference and Exhibition: Vehicle Electronic Systems 2001.

Skinner, J.A., Todo, S., Iwake, H., Pinskerova, V., Scott, G., Freeman, M.A.R. and Taylor, M. (2001) The effect of cement mantle thickness on outcome in total hip arthroplasty. Journal of Bone and Joint Surgery, 83B, (2), 167.

Sklenicka, V., Svoboda, M., Pahutova, M., Kucharova, K. and Langdon, T.G. (2001) Microstructural processes in creep of an AZ 91 magnesium-based composite and its matrix alloy. Materials Science and Engineering, 319-321, 741-745. (doi:10.1016/S0921-5093(01)01023-1).

Song, J., Xiong, Y. P. and Wang, X.P. (2001) Active control of bridge vibration under a moving load. Zhendong Gongcheng Xuebao / Journal of Vibration Engineering, 14, 83-85.

Song, J. and Xiong, Y.P. (2001) Optimal active control of bridge vibration subject to moving random loads. Journal of Southeast University, 31, (5A), 52-58.

Sosa, S.S. and Langdon, T.G. (2001) Characteristics of tensile creep in an yttria-stabilized tetragonal zirconia. In, Parker, D.J. (ed.) Creep and Fracture of Engineering Materials and Structures: Proceedings of the 9th International Conference. 9th International Conference on Creep and Fracture of Engineering Materials and Structures Cambridge, UK, Woodhead Publishing Limited, 115-124. (2941).

Sosa, Siari S. and Langdon, Terence G. (2001) Deformation characteristics of a 3Y TZP/20% Al2O3 composite in tensile creep. In, Chandra, Namas (ed.) Superplasticity in Advanced Materials - ICSAM-2000. 2000 International Conference on Superplasticity in Advanced Materials (ICSAM-2000) Switzerland, Trans Tech, 135-140. (Materials Science Forum 357-359).

Speyer, A.J., Stokes, K.R. and Wood, R.J.K. (2001) Erosion of aluminum based claddings on steel by sand in water. Wear, 250, (1-12), 802-808. (doi: 10.1016/S0043-1648(01)00734-7).

Spigarelli, S., Cabibbo, M., Evangelista, E. and Langdon, T.G. (2001) Creep behaviour of an Al-2024 PM-15% SiC composite. In, Parker, D.J. (ed.) Creep and fracture of engineering materials and structures: Proceedings of the 9th international conference. 9th International Conference on Creep and Fracture of Engineering Materials and Structures Cambridge, UK, Woodhead Publishing Limited, 271-280.

Spigarelli, S., Evangelista, E. and Cerri Langdon, T.G. (2001) Constitutive equations for hot deformation of an Al-6061/20% Al2O3 composite. Materials Science and Engineering, 319-321, 721-725. (doi:10.1016/S0921-5093(01)01071-1).

Spigarelli, S., Gariboldi, E. and Langdon, T.G. (2001) High temperature deformation of an Al 6061-Al2O3 particulate metal matrix composite. In, Parker, D.J. (ed.) Creep and fracture of engineering materials and structures: Proceedings of the 9th international conference. 9th International Conference on Creep and Fracture of Engineering Materials and Structures Cambridge, UK, Woodhead Publishing Group, 291-298.

Spiller, D.M., Beduz, C., Al-Mosawi, M.K., Friend, C., Thacker, P. and Ballarino, A. (2001) Design optimisation of 600a - 13ka current leads for the large Hadron Collider project at CERN. Superconductor Science and Technology, 14, (3), 168-172. (doi:10.1088/0953-2048/14/3/308).

Starink, M.J. (2001) On the meaning of the impingement parameter in kinetic equations of diffusion controlled reactions. Journal of Materials Science, 36, (18), 4433-4441. (doi:10.1023/A:1017974517877).

Starink, M.J. and Thomson, R.C. (2001) The effect of high temperature exposure on the dendritic segregation in a conventionally cast Ni based superalloy. Journal of Materials Science, 36, (23), 5603-5608. (doi:10.1023/A:1012513615622).

Stephen, N.G. (2001) Discussion: "Shear Coefficients for Timoshenko Beam Theory" (Hutchinson, Jr.R., 2001, ASME J. Appl. Mech., 68, pp.87-92). Journal of Applied Mechanics: Transactions of the ASME, 68, (6), 959-960. (doi:10.1115/1.1412454).

Stirrup, R., Loebis, D., Chipperfield, A.J., Tang, K.S., Kwong, S. and Man, K.F. (2001) Gain-scheduled control of a solar power plant using a hierarchical MOGA-tuned fuzzy Pi-Controller. In, Proceedings of the IEEE Symposium on Industrial Electronics 2001. IEEE Symposium on Industrial Electronics 2001 Piscataway, USA, Institution of Electronic and Electrical Engineers, 25-29. (doi:10.1109/ISIE.2001.931749).

Stoica, G.M., Chen, L.J., Payzant, E.A., Agnew, S.R., Lu, Y.L., Han, B.Q., Langdon, T.G. and Liaw, P.K. (2001) Deformation characteristics of Al and Mg alloys subjected to equal channel angular processing. In, Lesuer, D.R. and Srivatsan, T.S. (eds.) Modeling the Performance of Engineering Structural Materials. Proceedings of a Symposium Sponsored by the Structural Materials Division (Smd) of Tms (The Minerals, Metals & Materials Society) Held During the fall , TMS, 295-306.

Su, Y.H., Chen, K.S., Roberts, D.C. and Spearing, S.M. (2001) Large deflection analysis of a pre-stressed annular plate with a rigid boss under axisymmetric loading. Journal of Micromechanics and Microengineering, 11, (6), 645-653. (doi: 10.1088/0960-1317/11/6/305).

Su, Zhixiao, Xing, Jingtang and Zheng, Zhaochang (2001) A new approach for the numerical integration of non-linear dynamic systems considering remainder. Fourth International ICSC Symposium, Soft Computing and Intelligent Systems for Industry, 1-7.

Swingler, J. and McBride, J.W. (2001) Integrated wiring and interconnecting of electrical and electronic components for intelligent systems. In, 4th International Conference and Exhibition: Vehicle Electronic Systems, San Francisco, USA, 25 - 29 Aug 2001. 8pp.

Takeda, K., Allsopp, N. K., Hardwick, J.C., Macey, P.C., Nicole, D.A., Cox, S.J. and Lancaster, D.J. (2001) An assessment of MPI environments for Windows NT. The Journal of Supercomputing, 19, (3), 315-323. (doi:10.1023/A:1011138816820).

Takeda, K., Zhang, X., Ashcroft, G.B. and Nelson, P.A. (2001) Unsteady aerodynamics of flap cove flow in a high-lift device configuration. 39th Aerospace Sciences Meeting and Exhibition, Reno, USA, 08 - 11 Jan 2001. Reston, USA, American Institute of Aeronautics and Astronautics10pp.

Tan, K.H., New, A. and Taylor, M. (2001) Finite element analysis on the performance ranges of an implanted knee. In, Proceedings of the Biological Mechanics Network 2001 Meeting, Southampton, UK, 2001. , 3-4.

Tatem, A.J., Lewis, H.G., Atkinson, P.M. and Nixon, M.S. (2001) Super-resolution mapping of multiple-scale land cover features using a Hopfield neural network. In, Geoscience and Remote Sensing Symposium, 2001. IGARSS '01. IEEE 2001 International. Sydney, Australia, IEEE, 3200-3202. (doi:10.1109/IGARSS.2001.978302).

Tatem, A.J., Lewis, H.G., Atkinson, P.M. and Nixon, M.S. (2001) Super-resolution mapping of urban scenes from IKONOS imagery using a Hopfield neural network. In, IGARSS 2001 Scanning the Present and Resolving the Future. IGARSS 2001 Scanning The Present and Resolving the Future Sydney, Australia, Institute of Electrical and Electronics Engineers, 3203-3205. (doi:10.1109/IGARSS.2001.978303).

Tatem, A.J., Lewis, H.G., Atkinson, P.M. and Nixon, M.S. (2001) Super-resolution target identification from remotely sensed images using a Hopfield neural network. IEEE Transactions on Geoscience and Remote Sensing, 39, (4), 781-96. (doi:10.1109/36.917895).

Tatem, Andrew J., Lewis, Hugh G., Atkinson, Peter M. and Nixon, Mark S. (2001) Multiple-class land-cover mapping at the sub-pixel scale using a Hopfield neural network. International Journal of Applied Earth Observation and Geoinformation, 3, (2), 184-190. (doi:10.1016/S0303-2434(01)85010-8).

Taylor, M. and Barrett, D.S. (2001) Influence of uni-condylar loading on the stresses and kinematics on a total knee joint replacement. In, International Society of Biomechanics XVIIIth Congress, Zurich, Switzerland, 08 - 13 Jul 2001.

Taylor, M., Cotton, J.R. and Zioupos, P. (2001) Finite element simulation of the fatigue behaviour of cortical and cancellous bone. In, 15th AIMETA Congress of Theoretical and Applied Mechanics, Taormina, Sicily, 26 - 29 Sep 2001.

Taylor, M., Cotton, J.R. and Zioupos, P. (2001) A stochastic approach to simulate the variable fatigue life of cortical bone using a combined CDM and FE method. In, European Society for Biomaterials 2001 Conference, London, UK, 12 - 14 Sep 2001.

Taylor, M. and Zioupos, P. (2001) A combined FEM and continuum damage mechanics approach to simulate the variable fatigue life of human cortical bone: a preliminary study. In, Jones, M.L., Middleton, J., Pande, G.N. and Shrive, N.G. (eds.) Computer Methods in Biomechanics and Biomedical Engineering. Fourth International Symposium on Computer Methods in Biomechanics and Biomedical Engineering Oxford, UK, Taylor & Francis, 355-360.

Thomas, Ken S., Cox, Simon J., Beckett, Duan H., Hiett, Ben P., Generowicz, Jasek and Daniell, Geoffrey J. (2001) Eigenvalue spectrum estimation and photonic crystals. In, Euro-Par 2001: Parallel Processing: 7th International Euro-Par Conference. 7th International Euro-Par Conference Berlin, Germany, Springer, 578-586. (Lecture Notes in Computer Science 2150).

Toribio, M.G. and Spearing, S.M. (2001) Compressive response of notched glass-fiber epoxy/honeycomb sandwich panels. Composites Part A: Applied Science and Manufacturing, 32, (6), 859-870. (doi: 10.1016/S1359-835X(00)00150-0).

Tundidor, J., Martinez, E., Beduz, C., Huang, Y. and Yang, Y. (2001) AC losses measurement of twisted multifilamentary Bi-2223 tapes with different configurations. IEEE Transactions on Applied Superconductivity, 11, (1), p.2636.

Turnock, S.R. (2001) Effective design of small craft propulsion systems. In, Proceedings of International Workshop on Small Craft, Surabaya, Indonesia, 05 - 06 Jul 2001. 10pp.

Turnock, S.R., Holroyd, N.J. and Date, J.C. (2001) Appendage design for the America's Cup using CFD. In, European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS--CFD 2001), Swansea, UK, 04 - 07 Sep 2001. 19pp.

Uppal, Suresh, Willoughby, A.F.W., Bonar, Janet M., Evans, Alan G.R., Cowern, Nick E.B., Morris, Richard and Dowsett, Mark G. (2001) Ion-implantation and diffusion behaviour of boron in germanium. Physica B: Condensed Matter, 308-310, 525-528. (doi: 10.1016/S0921-4526(01)00752-9).

Uppal, Suresh and Willoughby, Arthur F.W. (2001) Diffusion of boron in germanium. In, Proceedings of the Seventh Postgraduate Conference in Engineering Materials,, Southampton, UK, Oct 2001. , 19-20.

Uppal, Suresh, Willoughby, Arthur F.W., Bonar, Janet M., Evans, Alan G.R., Cowern, Nick E.B., Morris, Richard and Dowsett, Mark G. (2001) Diffusion of ion-implanted boron in germanium. Journal of Applied Physics, 90, (8), 4293-4295. (doi:10.1063/1.1402664).

Utama, I.K.A.P. and Molland, M.F. (2001) Experimental and numerical investigations into catamaran viscous resistance. In, Proceedings of Sixth International Conference on Fast Sea Transportation, FAST 2001. Sixth International Conference on Fast Sea Transportation, FAST 2001 , Southampton University, 295-306.

Uzunoglu, B., Tan, M. and Price, W.G. (2001) Low-Reynolds-number flow around an oscillating circular cylinder using a cell viscousboundary element method. International Journal for Numerical Methods in Engineering, 50, (10), 2317-2338. (doi: 10.1002/nme.122).

Veres, S.M. (2001) Adaptive harmonic control. International Journal of Control, 74, (12), 1219-1225.

Veres, S.M. (2001) Convergence of control performance by unfalsification of models - levels of confidence. International Journal of Adaptive Control and Signal Processing, 15, (5), 471-502. (doi:10.1002/acs.685).

Veres, S.M., Baramov, L., Tutty, O.R. and Rogers, E. (2001) Iterative design for active control of fluid flow. In, Proceedings of the European Control Conference 2001 (ECC'01), Porto Salvo, PT, 04 - 07 Sep 2001. , 1434-1439.

Veres, S.M., Gabriel, S.B., Rogers, E. and Mayne, D.Q. (2001) Analysis of formation flying control of a pair of nano-satellites. In, Proceedings of the 40th IEEE Conference on Design and Control, 2001, Orlando, US, 04 - 07 Dec 2001. , 1095-1100. (doi:10.1109/.2001.981031).

Veres, S.M., Rokityanski, D.Y., Gabriel, S.B. and Rogers, E. (2001) Ellipsoid methods for formation flying control of two nano-satellites. In, Fradkov, A.L. and Kurzhanski, A.B. (eds.) Nonlinear Control Systems 2001 (Nolcos 2001): A Proceedings Volume from the 5th IFAC Symposium. IFAC Symposium on Nonlinar Control Systems (NOLCOS 2001) Oxford, UK, Elsevier.

Veveçka, A., Cavaliere, P., Cabibbo, M., Evangelista, E. and Langdon, T.G. (2001) Strengthening of a commercial Al-5754 alloy using equal-channel angular pressing. Journal of Materials Science Letters, 20, (17), 1601-1603. (doi:10.1023/A:1017925105816).

Vitanov, V.I., Voutchkov, I.I. and Bedford, G.M. (2001) Neurofuzzy approach to process parameter selection for friction surfacing applications. Surface and Coatings Technology, 140, (3), 256-262. (doi:10.1016/S0257-8972(01)01128-8).

Voutchkov, I.I., Jaworski, B., Vitanov, V.I. and Bedford, G.M. (2001) An integrated approach to friction surfacing process optimisation. Surface and Coatings Technology, 141, (1), 26-33. (doi:10.1016/S0257-8972(01)01127-6).

Wallace, K.M., Clegg, C. and Keane, A.J. (2001) Visions for engineering design: a multi-disciplinary perspective. In, Culley, S. (ed.) International Conference on Engineering Design: ICED 01. UK, Wiley, 107-14.

Wang, L., Hope, A.D. and Sadek, H. (2001) Multi-layer neural networks and pattern recognition for pump fault diagnosis. In, Starr, Andrew G. and Rao, B.K.N. (eds.) Condition Monitoring and Diagnostic Engineering Management: Proceedings of the 14th International Congress. 14th International Congress on Condition Monitoring and Diagnostic Engineering Management Oxford, UK, Elsevier, 593-598.

Wheeler, D.W. and Wood, R.J.K. (2001) Erosion damage in diamond coatings by high velocity sand impacts. In, Proceedings of the 52nd Diamond Conference, Bristol, UK, 2001. , 1-4.

Wheeler, D.W. and Wood, R.J.K. (2001) High velocity sand impact damage on CVD diamond. Diamond and Related Materials, 10, (3-7), 459-462. (doi: 10.1016/S0925-9635(00)00520-3).

Wheeler, D.W. and Wood, R.J.K. (2001) Solid particle erosion of diamond coatings under non-normal impact angles. Wear, 250, (1-12), 795-801. (doi: 10.1016/S0043-1648(01)00733-5).

White, N.M., Glynne-Jones, P., Beeby, S.P., Tudor, M.J. and Hill, M. (2001) Design and modelling of a vibration powered micro-generator. Measurement and Control, 34, 267-271.

Willoughby, Arthur F.W., Bonar, Janet M., Dan, Aihua and McGregor, Barry M. (2001) Enhanced diffusion following point defect injection into B in SiGe and Si. Defect and Diffusion Forum, 194-199, 717 -722.

Winwood, K., Zioupos, P., Cotton, J.R. and Taylor, M. (2001) The development of plastic strains during fatigue damage accumulation of ageing human cortical bone. In, International Society of Biomechanics XVIIIth Congress, Zurich, Switzerland, 08 - 13 Jul 2001. , p.721.

Winwood, K., Zioupos, P., Cotton, J.R. and Taylor, M. (2001) Measurements of plastic and elastic strains during tension and compression fatigue of ageing human cortical bone. In, Conference of European Society for Biomaterials, 2001, London, UK, 12 - 14 Sep 2001.

Wong, A.S., New, A.M.R., Ritchie, A. and Taylor, M. (2001) Influence of an interference-fit on the strain distribution in the implanted proximal femur. In, Proceedings of the Post Graduate Conference in Engineering Materials 2001, Southampton, UK, 2001. , 49-50.

Wood, R.J.K., Jones, T.F., Miles, N.J. and Ganeshalingham, J. (2001) Upstream swirl-induction for reduction of erosion damage from slurries in pipeline bends. Wear, 250, (1-12), 770-778. (doi: 10.1016/S0043-1648(01)00715-3).

Wu, A., Syngellakis, S. and Mellor, B.G. (2001) Finite element analysis of residual stresses in a butt weld. In, University of Southampton School of Engineering Sciences Postgraduate Conference, Southampton, UK, 2001. , 37-8.

Xiong, Y.P., Xing, J.T. and Price, W.G. (2001) Power flow analysis of complex coupled systems by progressive approaches. Journal of Sound and Vibration, 239, (2), 275-295. (doi:10.1006/jsvi.2000.3159).

Xiong, Y.P., Xing, J.T., Price, W.G. and Shenoi, R.A. (2001) Retrofitting active power flow control into passive vibration isolation systems. Proceedings of Asia-Pacific Vibration Conference 2001 (ed. B C Wen, 3, 1006-1011.

Xu, C., Lee, S. and Langdon, T.G. (2001) An investigation of cavity development in a superplastic aluminium alloy prepared by equal-channel angular pressing. In, Chandra, Namas (ed.) Superplasticity in Advanced Materials - ICSAM-2000. International Conference on Superplasticity in Advanced Materials (ICSAM-2000) Switzerland, Trans Tech, 521-526. (Materials Science Forum 357-359).

Xu, Y.M. and Mellor, B.G. (2001) The effect of fillers on the wear resistance of thermoplastic polymeric coatings. Wear, 251, (1-12), 1522-1531. (doi: 10.1016/S0043-1648(01)00791-8).

Yang, N., Boselli, J. and Sinclair, I. (2001) Simulation and quantitative assessment of homogeneous and inhomogeneous particle distributions in particulate metal matrix composites. Journal of Microscopy, 201, (2), 189-200. (doi: 10.1046/j.1365-2818.2001.00766.x).

Yang, Y., Martínez, E., Beduz, C. and Huang, Y. (2001) Frequency dependence of AC losses of AgAu/PbBi-2223 tapes with twisted filaments under perpendicular AC fields. IEEE Transactions on Applied Superconductivity, 11, (1), 2636.

Yao, Y.F., Thomas, T.G., Sandham, N.D. and Williams, J.J.R. (2001) Direct numerical simulation of turbulent flow over a rectangular trailing edge. Theoretical and Computational Fluid Dynamics, 14, (5), 337-358. (doi: 10.1007/s001620050144).

Yee, H.C., Sjogreen, B, Sandham, N.D. and Hadjadj, A (2001) Progress in the development of a class of efficient low dissipative high order shock-capturing methods. In, Hafez, Mohamed, Morinishi, Koji and Périaux, Jaques (eds.) Computational Fluid Dynamics for the 21st Century: Proceedings of a Symposium Honoring Prof. Satofuka on the Occasion of His 60th Birthday, Kyoto, Japan, 15-17 July, 2000. Symposium Honouring Professor Satofuka on the Occasion of his 60th Birthday Germany, Springer, 77-102. (Notes on Numerical Fluid Mechanics, 78).

Young, E.A., Yang, Y., Beduz, C. and Riddle, R. (2001) Ic and phase characteristics of (Bi,Pb)2223 tapes after 1 heat treatment in a temperature gradient under different oxygen partial pressures. IEEE Transactions on Applied Superconductivity, 11, (Issue 1, part 3), 2979-2982. (doi: 10.1109/77.919688).

Zerihan, Jonathan (2001) An investigation into the aerodynamics of wings in ground effect. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 218pp.

Zerihan, Jonathan and Zhang, Xin (2001) Aerodynamics of Gurney flaps on a wing in ground effect. AIAA Journal, 39, (5), 772-780.

Zhang, X., Chen, K.S., Ghodssi, R., Ayón, A.A. and Spearing, S.M. (2001) Residual stress and fracture in thick tetraethylorthosilicate (TEOS) and silane-based PECVD oxide films. Sensors and Actuators A: Physical, 91, (3), 373-380. (doi: 10.1016/S0924-4247(01)00610-0).

Zheng, Y., Atkinson, J.K., Sion, R.P. and Zhang, Z. (2001) A study of the effect of fabrication parameter variation on the environmental characteristics of thick film strain gauges fabricated on steel substrates. In, International Symposium on Microelectronics. Bellingham, USA, International Society for Optical Engineering, 731-735. (Proceedings of SPIE 4587).

Zhilyaev, A.P., Lee, S., Nurislamova, G.V., Valiev, R.Z. and Langdon, T.G. (2001) Microhardness and microstructural evolution in pure nickel during high-pressure torsion. Scripta Materialia, 44, (12), 2753-2758. (doi:10.1016/S1359-6462(01)00955-1).

Zhou, X., Luo, K.H. and Williams, J.J.R. (2001) Numerical studies on vortex structures in the near-field of oscillating diffusion flames. Heat and Mass Transfer, 37, (2-3), 101-110. (doi:10.1007/s002310000166).

Zhou, X., Luo, K.H. and Williams, J.J.R. (2001) Study of density effects in turbulent buoyant jets using large-eddy simulation. Theoretical Computational Fluid Dynamics, 15, (2), 95-120. (doi: 10.1007/s001620100045).

Zhou, X., Luo, K.H. and Williams, John J.R. (2001) Large-eddy simulation of a turbulent forced plume. European Journal of Mechanics B/Fluids, 20, (2), 233-254. (doi:10.1016/S0997-7546(00)01117-1).