Browse by Divisions pre August 2011

Dulieu-Barton, J.M., Brennan, M.J., Holford, K.M. and Worden, K. (eds.) (2003) Damage assessment of structures V, Uetikon-Zurich, Switzerland, Trans Tech, 600pp. (DAMAS).

Markvart, Tom and Castaner, Luis (eds.) (2003) Practical handbook of photovoltaics: fundamentals and applications, Oxford, UK, Elsevier, 998pp.

Griffiths, G. (ed.) (2003) The technology and applications of autonomous underwater vehicles, Abingdon, UK, Taylor & Francis, 360pp. (Ocean Science and Technology, 2).

Abu Sharkh, S.M., Turnock, S.R. and Hughes, A.W. (2003) Design and performance of an electric tip-driven thruster. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 217, (3), 133-147. (doi:10.1243/147509003322255840).

Abu-Sharkh, S., Yuratick, M., Harris, M. and Head, P. (2003) Motorising drills. The IEE Power Engineer Journal, 17, (1), 40-41. (doi:10.1049/pe:20030110).

Abu-Sharkh, S.M. (2003) Permanent magnet machines for underwater thrusters. In, 5th Joint UK Magnetics Workshop, Glasgow, UK, 02 - 04 Jul 2003.

Abu-Sharkh, S.M. and Abu-Sara, A. (2003) Current control of utility-connected two-level and three-level PWM inverters. In, Proceedings of the 10th European Conference on Power Electronics and Applications. 10th European Conference on Power Electronics and Applications Brussels, Belgium, European Power Electronics (EPE) Association.

Abu-Sharkh, S.M. and Griffiths, G. (2003) Energy storage systems for unmanned underwater vehicles. Underwater Technology, 25, (3), 143-148. (doi:10.3723/175605403783379714).

Afferante, L., Ciavarella, M., Decuzzi, P. and Demelio, G. (2003) Thermoelastic instability in a thin layer sliding between two half-planes: transient behaviour. Tribology International, 36, (3), 205-212. (doi:10.1016/S0301-679X(02)00185-8).

Afferante, L., Ciavarella, M., Decuzzi, P. and Demelio, G. (2003) Transient analysis of frictionally excited thermoelastic instability in multi-disk clutches and brakes. Wear, 254, (1-2), 136-146. (doi:10.1016/S0043-1648(02)00306-X).

Aglietti, G.S. (2003) On the use of anti-vibration devices for PCBs in space application. ASME Journal of Electronic Packaging

Aglietti, G.S. and Rogers, E. (2003) Experimental validation of a Lagrange-Rayleigh-Ritz modelling technique for mass loaded actively controlled panels. Journal of Aerospace Engineering, 16, (1), 31-37. (doi:10.1061/(ASCE)0893-1321(2003)16:1(31)).

Ahmad, S.M., Chipperfield, A.J. and Tokhi, M.O. (2003) Dynamic modelling and linear quadratic Gaussian control of a twin-rotor multi-output system. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 217, (3), 203-227. (doi:10.1243/095965103765832885).

Ahmed, T.M., Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2003) Elimination of irregular frequencies in three-dimensional seakeeping predictions. In, NAV 2003: International conference on on ship and shipping research, Palermo, Italy, 24 - 27 Jun 2003. Italy, Cetena4pp.

Al-Mosawi, M.K., Xu, B., Beduz, C., Goddard, K., Sykulski, J.K., Yang, Y., Stephen, N.G. and Stoll, R. (2003) Recent progress of 100kVA high temperature superconducting generator. In, Proceedings of 6th European Conference on Applied Superconductivity EUCAS 2003, Sorrento, Italy, 14 - 18 Sep 2003. Taylor and Francis CRC Press.

Allan, Rob, Baker, David, Boyd, David, Chohan, Dharmesh, Cox, Simon, Eres, M.H., Fowler, Ron, Furmento, Nathalie, Giddy, Jonathan, Harmer, Terry, Hayes, Mark, Hill, Nick, Hillier, Jon, Jensen, Jens, Keane, Andy, Krznaric, Marco, Lee, William, McKeown, Mark, Mills, Alistair, Newhouse, Steven, Pickles, Stephan, Pinning, Robin, Richards, Andy, Saleem, Asif and Watt, John (2003) Building the e-science grid in the UK: middleware, applications and tools deployed at level 2. In, UK e-Science All Hands Meeting 2003, Nottingham, UK, 02 - 04 Sep 2003. EPSRC.

Alonso Vazquez, A., Lauge-Pederson, H., Lidgren, L. and Taylor, M. (2003) Ankle arthrodesis with three-screw fixation: FE analysis of initial stability. In, Transactions of the International Congress on Computational Bioengineering, Zaragoza, Spain, 24 - 26 Sep 2003. Zaragoza, Spain, Instituto de Investigación en Ingeniería de Aragón, Universidad de Zaragoza.

Alonso-Vazquez, Ana, Lauge-Pederson, Henrik, Lidgren, Lars and Taylor, Mark (2003) Finite element analysis of the initial stability of ankle arthrodesis with internal fixation: flat cut versus intact joint contours. Clinical Biomechanics, 18, (3), 244-253. (doi:10.1016/S0268-0033(02)00207-3).

Anthony, D.K. and Keane, A.J. (2003) Robust-optimal design of a lightweight space structure using a genetic algorithm. AIAA Journal, 41, (8), 1601-1604.

Anthony, D.K., Sexton, C.J., Charlston, W.B., Keane, A.J., Lewis, S.M. and Please, C.P. (2003) An efficient experiment methodology to investigate product design: an acoustic sounder case study. In, Proceedings of the International Conference on Managing Innovative Manufacturing (MIM2003), Aalborg, Denmark, 22 - 23 Sep 2003.

Ashcroft, G.B., Takeda, K. and Zhang, X. (2003) A numerical investigation of the noise radiated by a turbulent flow over a cavity. Journal of Sound and Vibration, 265, (1), 43-60. (doi:10.1016/S0022-460X(02)01439-6).

Ashcroft, Graham and Zhang, Xin (2003) Optimized prefactored compact schemes. Journal of Computational Physics, 190, (2), 459-477. (doi:10.1016/S0021-9991(03)00293-6).

Ayón, Arturo A., Zhang, Xin, Turner, Kevin T., Choi, Dongwon, Miller, Bruno, Nagle, Steven F. and Spearing, S. Mark (2003) Characterization of silicon wafer bonding for power MEMS applications. Sensors and Actuators A: Physical, 103, (1-2), 1-8. (doi: 10.1016/S0924-4247(02)00329-1).

Bah, M T and Browne, M (2003) Probabilistic analysis of a cemented hip implant. In, 1st International Congress on Computational Bioengineering, Zaragoza, Spain, 24 - 26 Sep 2003. 6pp.

Bah, M.T. and Browne, M. (2003) Probabilistic analysis of a cemented hip implant. In, University of Southampton School of Engineering Sciences Postgraduate Conference, Southampton, UK, 2003. , 33-9.

Bah, M.T., Nair, P.B., Bhaskar, A. and Keane, A.J. (2003) Efficient prediction of the forced response statistics of mistuned bladed discs. In, Eighth International Conference on Recent Advances in Structural Dynamics, Southampton, UK, 14 - 16 Jul 2003.

Bah, M.T., Nair, P.B., Bhaskar, A. and Keane, A.J. (2003) Forced response statistics of mistuned bladed disks: a stochastic reduced basis approach. Journal of Sound and Vibration, 263, (2), 377-397. (doi:10.1016/S0022-460X(02)01058-1).

Bah, Mamadou T., Nair, Prasanth B., Bhaskar, Atul and Keane, Andy J. (2003) Stochastic component mode synthesis. In, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, USA, 07 - 10 Apr 2003. USA, American Institute of Aeronautics and Astronautics11pp.

Baig, M.F. and Chernyshenko, S.I. (2003) Regeneration mechanism of coherent structures in near-wall turbulence. In, International Symposium on Turbulence, Heat and Mass Transfer (ICHMT), Antalya, Turkey, 12 - 17 Oct 2003.

Baig, M.F. and Chernyshenko, S.I. (2003) Regeneration mechanism of organized structures in near-wall turbulence. In, Third International Symposium on Turbulence and Shear Flow Phenomena (TSFP-3), Sendai, Japan, 24 - 27 Jun 2003.

Balaji, S.K. and Tatnall, A.R.L. (2003) Precise modelling of relative trajectory for formation flying spacecraft. In, Proceedings of the 54th International Astronautical Federation (IAF) Congress. 54th International Astronautical Congress of the International Astronautical Federation, the International Academy of Astronautics, and the International Institute of Space Law Reston, USA, American Institute of Aeronautics and Astronautics.

Balaji, Shankar K. and Tatnall, Adrian R. (2003) Relative trajectory analysis of dissimilar formation flying spacecraft. In, Scheeres, Daniel J., Pittelkau, Mark E., Proulx, Ronald J. and Cangahuala, L. Alberto (eds.) AAS/AIAA Spaceflight Mechanics 2003. San Diego, USA, Univelt, 531-544. (Advances in the Astronautical Sciences, 114, part I). (AAS 03-134).

Balaji, Shankar Kumar and Tatnall, Adrian (2003) Precise modelling of spacecraft relative motion for formation flying spacecraft. In, 54th International Astronautical Congress of the International Astronautical Federation, the International Academy of Astronautics, and the International Institute of Space Law, Bremen, Germany, 29 Sep - 03 Oct 2003.

Balaji, Shankar Kumar and Tatnall, Adrian (2003) System design issues of small formation-flying spacecraft. In, Proceedings of IEEE Aerospace Conference 2003. Aerospace Conference, 2003 , IEEE, 2587-2597.

Ballard, E.J., Hudson, D.A., Price, W.G. and Temarel, P. (2003) Time domain simulation of symmetric ship motions in waves. Transactions of the Royal Institution of Naval Architects, Part A: International Journal of Maritime Engineering, 145, (A2), 89-108.

Baramov, Lubimor, Tutty, Owen and Rogers, Eric (2003) Robust control of a nonlinear fluidics problem. Lecture notes in Control and Information Sciences, 281, 21-31.

Barik, R.C., Wharton, J.A., Wood, R.J.K., Tan, K.S. and Stokes, K.R. (2003) Erosion and erosion-corrosion performance of cast and thermally sprayed nickel-aluminium bronze. In, RTO AVT Specialists’ Meeting on “The Control and Reduction of Wear in Military Platforms”, Williamsburg, USA, 07 - 09 Jun 2003. RTO-MP-AVT-10925pp, 17-17.

Bazoune, A., Khulief, Y.A. and Stephen, N.G., Stephen, N.G. (ed.) (2003) Shape functions of three-dimensional Timoshenko beam element. Journal of Sound and Vibration, 259, (2), 473-480. (doi:10.1006/jsvi.2002.5122).

Beckett, Duan H., Hiett, Ben, Thomas, Ken S. and Cox, Simon J. (2003) Applied grid computing: optimisation of photonic devices. In, Kosch, Harald, Böszörményi, László and Hellwagner, Hermann (eds.) Euro-Par 2003 Parallel Processing: 9th International Euro-Par Conference Klagenfurt, Austria, August 26-29, 2003 Proceedings. Euro-Par 2003 Parallel Processing: 9th International Euro-Par Conference , Springer, 533-536. (Lecture Notes in Compute Science 2790). (doi:10.1007/978-3-540-45209-6_76).

Bello, J.O., Wharton, J.A. and Wood, R.J.K. (2003) Evalutaion of the adhesive properties of downhole corrosion resistant polymeric coatings by cathodic disbondment. In, Corrosion NACE, 2003. Texas, USA, NACE International.

Bello, J.O. and Wood, R.J.K. (2003) Grooving micro-abrasion of polyamide 11 coated carbon steel tubulars for downhole application. Wear, 255, (7-12), 1157-1167. (doi:10.1016/S0043-1648(03)00226-6).

Bhaskar, Atul (2003) Waveguide modes in elastic rods. Proceedings: Mathematical, Physical and Engineering Sciences, 459, (2029), 175-194. (doi:10.1098/rspa.2002.1013).

Boltovets, N.S., Dugaev, V.K, Kholevchuk, V.V, McDonald, P.C, Mitin, V.F, Nemish, I.Yu, Pavese, F, Sorokin, P.V., Soloviev, E.A and Venger, E.F (2003) New generation of resistance thermometers based on Ge films on GaAs substrates. In, Mitin, V.F and McDonald, P.C (eds.) Temperature: its Measurement and Control in Science and Industry. Eighth International Temperature Symposium , American Institute of Physics, 399-404. (AIP Conference Proceedings 684, 7).

Bose, K. and Wood, R.J.K. (2003) Influence of load and speed on rolling micro-abrasion of CVD diamond and other hard coatings. Diamond and Related Materials, 12, (3-7), 753-756. (doi:10.1016/S0925-9635(02)00238-8).

Boyd, S.W., Blake, J.I.R., Shenoi, R.A. and Mawella, J. (2003) Fatigue life characterisation of hybrid composite-steel joints. In, Proceedings of the Royal Institution of Naval Architects Conference on Advanced Marine Materials: Technology and Applications, 09 - 10 Oct 2003. London, UK, The Royal Institution of Naval Architects.

Brierley, A.S., Fernandes, P.G., Brandon, M.A., Armstrong, F., Millard, N.W., McPhail, S.D., Stevenson, P., Pebody, M., Perrett, J.R., Squires, M., Bone, D.G. and Griffiths, G. (2003) An investigation of avoidance by Antarctic krill of RRS "James Clark Ross" using the Autosub-2 autonomous underwater vehicle. Fisheries Research, 60, (2-3), 569-576. (doi:10.1016/S0165-7836(02)00144-3).

Briscoe, A., New, A.M. and Taylor, M. (2003) Effect of pre-cooling and pre-heating a hip stem on the bone-cement interface temperature history. In, 1st International Congress on Computational Bioengineering, Zaragoza, Spain, 24 - 26 Sep 2003. 8pp.

Briscoe, M. and Aglietti, G.S. (2003) Spacecraft mechanisms. In, Fortescue, Peter, Stark, John and Swinerd, Graham (eds.) Spacecraft Systems Engineering 3rd Edition. Chichester, UK, Wiley, 501-529.

Brown, R.E., Newman, S.J., Perry, F.J. and Leishman, J.G. (2003) Blade twist effects on rotor behaviour in the vortex ring state. In, 59th Annual Forum, American Helicopter Society, Phoenix, Arizona, 2003. 14pp.

Burianek, D.A., Giannokopoulos, A. and Spearing, S.M. (2003) Modeling of facesheet crack growth in titanium-graphite hybrid laminates, part I. Engineering Fracture Mechanics, 70, (2), 775-798. (doi: 10.1016/S0013-7944(02)00086-3).

Burianek, D.A. and Spearing, S.M. (2003) Modeling of facesheet crack growth in titanium-graphite hybrid laminates. Part II: experimental results. Engineering Fracture Mechanics, 70, (6), 799-812. (doi: 10.1016/S0013-7944(02)00087-5).

Care, I., Wood, R.J.K., Harvey, T.J., Morris, S., Wang, L. and Powrie, H.E.G. (2003) Electrostatic monitoring of aerospace bearings. In, Sensors & Their Applications XIII, Medway, UK, 06 - 08 Sep 2005. London, UK, Institution of Engineering and Technology, 531-538.

Castaner, L., Bermejo, S., Markvart, T. and Fragaki, K. (2003) Energy balance in stand-alone PV systems. In, Markvart, T. and Castaner, L. (eds.) Practical handbook of photovoltaics: fundamentals and applications. , Elsevier, 531-542.

Castaner, L., Bermejo, S., Markvart, T. and Fragaki, K. (2003) Energy production by a PV array. In, Markvart, T. and Castaner, L. (eds.) Practical handbook of photovoltaics: fundamentals and applications. , Elsevier, 517-530.

Chen, L., Shadbolt, N.R., Tao, F., Puleston, C., Goble, C. and Cox, S.J. (2003) Exploiting semantics for e-science on the semantic grid. In, Web Intelligence (WI2003) Workshop on Knowledge Grid and Grid Intelligence

Chen, Liming, Shadbolt, Nigel R., Goble, Carole, Tao, Feng, Cox, Simon J., Puleston, Colin and Smart, P.R. (2003) Towards a knowledge-based approach to semantic service composition. Lecture Notes in Computer Science, 2870, 319-334. (doi:10.1007/b14287).

Chernyshenko, S.I. (2003) Generalised optimal perturbation and organised structures in near-wall turbulence. At Aerodynamics and Gas Dynamics in XXI century, Moscow, Russia, 27 - 30 Jan 2003.

Chernyshenko, S.I. (2003) Generalised optimal perturbation theory for predicting the streak spacing in turbulent flow. In, LMS-Durham Workshop. New developments and Applications in Rapid Fluid Flows, Durham, UK, 14 - 18 Jul 2003. Durham, UK, Durham University.

Chernyshenko, S.I. (2003) Organized structures in the near-wall turbulence and generalized optimal perturbations. At International Conference, Kolmogorov and Contemporary Mathematics, Scientific Program, Moscow State University, Moscow, Russia, 16 - 21 Jun 2003.

Chernyshenko, S.I. (2003) Streaks in near-wall turbulent flow and generalisation of the optimal perturbations theory. In, The British Applied Mathematics Colloquium 2003, Southampton, UK, 07 - 10 Apr 2003.

Chernyshenko, S.I., Galletti, B., Iollo, A. and Zannetti, L. (2003) Trapped vortices and a favourable pressure gradient. Journal of Fluid Mechanics, 482, 235-255. (doi:10.1017/S0022112003004026).

Ciavarella, M. (2003) A crack-like notch analogue for a safe-life fretting fatigue design methodology. Fatigue and Fracture of Engineering Materials and Structures, 26, (12), 1159-1170. (doi:10.1046/j.1460-2695.2003.00721.x).

Ciavarella, M., Decuzzi, P., Tagarelli, V.L. and Demelio, G.P. (2003) Simple formulas for thermoelastic stresses in TBC coatings. Journal of Thermal Stresses, 26, (5), 409-422.

Ciavarella, M., Johansson, L., Afferante, L., Klarbring, A. and Barber, J.R. (2003) Interaction of thermal contact resistsance and frictional heating in thermoelastic instability. International Journal of Solids and Structures, 40, (21), 5583-5597. (doi:10.1016/S0020-7683(03)00313-5).

Ciavarella, M. and Macina, G. (2003) New results for the fretting-induced stress concentration on Hertzian and flat rounded contacts. International Journal of Mechanical Sciences, 45, (3), 449-467. (doi:10.1016/S0020-7403(03)00061-4).

Ciavarella, M. and Macina, G. (2003) A note on the crack analogue model for fretting fatigue. International Journal of Solids and Structures, 40, (4), 807-825. (doi:10.1016/S0020-7683(02)00652-2).

Coleman, G.N., Kim, J. and Spalart, P.R. (2003) Direct numerical simulation of a decelerated wall-bounded turbulent shear flow. Journal of Fluid Mechanics, 495, 1-18. (doi:10.1017/S0022112003005883).

Collins, R.S., Kaiser, C.R. and Cox, S.J. (2003) Modelling oscillations in the jet emission from microquasar GRS 1915+105. Monthly Notices of the Royal Astronomical Socity, 338, (2), 331-339. (doi:10.1046/j.1365-8711.2003.06100.x).

Connolley, T., Reed, P.A.S. and Starink, M.J. (2003) Short crack initiation and growth at 600 °C in notched specimens of Inconel718. Materials Science and Engineering A, 340, (1-2), 139-154. (doi:10.1016/S0921-5093(02)00169-7).

Cost, M., Martinez, E., Beduz, C., Yang, Y., Grilli, F., Dutoit, B., Vinot, E. and Tixador, P. (2003) 3D modeling of coupling between superconducting filaments via resistive matrix in AC magnetic field. IEEE Transactions on Applied Superconductivity, 13, (2, Part 3), 3634-3637. (doi:10.1109/TASC.2003.812416).

Cotton, John R., Winwood, Keith, Zioupos, Peter and Taylor, Mark (2003) Relationship between cycles to failure and the rate of damage and creep in fatigue tests of human cortical bone. In, ASME Summer Bioengineering Conference, Florida, USA, 25 - 29 Jun 2003. ASME International2pp, 209-210.

Cotton, John R., Zioupos, Peter, Winwood, Keith and Taylor, Mark (2003) Analysis of creep strain during tensile fatigue of cortical bone. Journal of Biomechanics, 36, (7), 943-949. (doi:10.1016/S0021-9290(03)00063-0).

Cunningham, P.R., Langley, R.S. and White, R.G. (2003) Dynamic response of doubly curved honeycomb sandwich panels to random acoustic excitation. Part 2:Theoretical study. Journal of Sound and Vibration, 264, (3), 605-637. (doi:10.1016/S0022-460X(02)01211-7).

Cunningham, P.R. and White, R.G. (2003) Dynamic response of doubly curved honeycomb sandwich panels to random acoustic excitation. Part 1: Experimental study. Journal of Sound and Vibration, 264, (3), 579-603. (doi:10.1016/S0022-460X(02)01210-5).

Curtis, Neil, New, Andrew, Taylor, Mark and Browne, Martin (2003) Effect of component alignment and ligament balancing on the passive stability of the replaced knee. In, Proceedings of the 2003 Summer Bioengineering Conference. 2003 Summer Bioengineering Conference New York, USA, American Society Of Mechanical Engineers (ASME), 1177-1178.

Ding, S.-J., Zaporojtchenko, V., Kruse, J., Zekonyte, J. and Faupel, F. (2003) Investigation of the interaction of evaporated aluminum with vapor deposited Teflon AF films via X-ray photoelectron spectroscopy. Applied Physics A: Materials Science & Processing, 76, (5), 851-856. (doi:10.1007/s00339-002-2031-2).

Dixon, Favian C. (2003) Numerical simulations of a transverse sonic jet in a laminar hypersonic flow. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 197pp.

Djidjeli, K., Price, W.G., Twizell, E.H. and Cao, Q. (2003) A linearized implicit pseudo-spectral method for some model equations: the regularized long wave equations. Communications in Numerical Methods in Engineering, 19, (11), 847-863. (doi:10.1002/cnm.635).

Doerffel, Dennis (2003) Peace-of-Mind Series Hybrid Electric Vehicle Drivetrain : Transfer Thesis (MPhil/PhD). Southampton, UK, University of Southampton, School of Engineering Sciences, 118pp.

Doncaster, C. Patrick, Pound, Graeme E. and Cox, Simon J. (2003) Dynamics of regional coexistence for more or less equal competitors. Journal of Animal Ecology, 72, (1), 116-126. (doi:10.1046/j.1365-2656.2003.00687.x).

Du, S.X., Georgoudis, E., Hudson, D.A. and Temarel, P. (2003) Simulation of ship motions in the time domain using direct impulse response functions. In, NAV 2003: International conference on ship and shipping research, Palermo, Italy, 24 - 27 Jun 2003. Palermo, Italy, Cetena12pp.

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2003) An improved matching method to solve the radiation problem of a ship moving in waves. In, 8th International Conference on Numerical Ship Hydrodynamics, Busan, Korea, 22 - 25 Sep 2003.

Du, S.X., Hudson, D.A., Price, W.G., Temarel, P. and Wu, Y.S. (2003) Numerical prediction of steady flow around high speed vessels with transom sterns. In, The 7th International Conference on Fast Sea Transportation, Italy, 07 - 10 Oct 2003.

Duan, Qi, Djidjeli, K., Price, W.G. and Twizell, E.H. (2003) Constrained control and approximation properties of a rational interpolating curve. Information Sciences, 152, 181-194. (doi: 10.1016/S0020-0255(02)00409-7).

Dudley, R.A., Young, E.A. and Yang, Y. (2003) The dependence of bend strain tolerance in Bi-2223 and Bi-2212 multifilamentary tapes on the measurement temperature. In, 6th European Conference on Applied Superconductivity (EUCAS 2003), Sorrento, Italy, 14 - 18 Sep 2003.

Dulieu-Barton, J.M. and Worden, K. (2003) Genetic identification of crack-tip parameters using thermoelastic isopachics. Measurement Science and Technology, 14, (2), 176-183. (doi:10.1088/0957-0233/14/2/304).

Dulieu-Barton, J.M. and Worden, K. (2003) Identification of crack-tip paramenters using thermoelastic isopachics and differential evolution. Key Engineering Materials, 245-246, 77-86.

Dwyer-Joyce, R.S., Lewis, R., Gao, N. and Grieve, D.G. (2003) Wear and fatigue of railway track caused by contamination, sanding and surface damage. In, 6th International Conference on Contact Mechanics and Wear of Rail/Sheel Systems (CM2003). Gothenburg, Sweden, CHARMEC, 211-220.

Earl, J.S., Dulieu-Barton, J.M. and Shenoi, R.A. (2003) Determination of hygrothermal ageing effects in sandwich construction joints using thermoelastic stress analysis. Composites Science and Technology, 63, (2), 211-223. (doi:10.1016/S0266-3538(02)00252-X).

Eres, M.H., Pound, Graeme, Jiao, Zhouan, Wason, Jasmin, Xu, Fenglain, Keane, Andy and Cox, Simon (2003) Implementation of a grid-enabled problem solving environment in Matlab. In, Goos, G, Hartmanis, J and van Leeuwen, J (eds.) Computational Science – ICCS 2003: International Conference Melbourne, Australia and St. Petersburg, Russia June 2-4, 2003 Proceedings. Computational Science – ICCS 2003: International Conference , Springer, 420-429. (Lecture Notes in Computer Science, 4 2660).

Fangohr, Hans, Koshelev, Alexei E. and Dodgson, Matthew J.W. (2003) Vortex matter in layered superconductors without Josephson coupling: numerical simulations within a mean-field approach. Physical Review B, 67, (17), 174508-[12pp]. (doi:10.1103/PhysRevB.67.174508).

Fasel, H.F., von Terzi, D.A. and Sandberg, R.D. (2003) A methodology for simulation of complex turbulent flows. In, 4th American Society of Mechanical Engineers & Japan Society of Mechanical Engineers Joint Fluids Engineering Conference - FEDSM'03, 06 - 11 Jul 2003.

Fedorov, D.V. (2003) An optimal numerical method for a singularly perturbed boundary value problem with a small parameter multiplying the higher order derivative. Computational Mathematics and Mathematical Physics, 43, (2), 217 -225.

Forrester, Alexander I.J., Bressloff, Neil W. and Keane, Andy J. (2003) Response surface model evolution. In, 16th AIAA Computational Fluid Dynamics Conference, Orlando, USA, 21 - 27 Jun 2003. Orlando, USA, American Institute of Aeronautics and Astronautics9pp.

Fortescue, Peter and Swinerd, Graham (2003) Attitude control. In, Fortescue, Peter, Stark, John and Swinerd, Graham (eds.) Spacecraft systems engineering, 3rd edition. , Wiley & Sons, 287-324.

Fragaki, A. and Markvart, T. (2003) Does global warming affect the design of stand-alone PV systems. At Materials Research Group 2pp, 155-156.

Gabriel, S.B. and Patrick, G.J. (2003) Solar energetic particle events: phenomenology and prediction. Space Science Reviews, 107, (1-2), 55-62. (doi:10.1023/A:1025599000778).

German, C., Tyler, P. and Griffiths, G. (2003) The maiden voyage of UK ROV "Isis". Ocean Challenge, 12, (3), 16-18.

Glasspool, W.V. and Atkinson, J.K. (2003) An evaluation of the charateristics of membrane materials suitable for the batch fabrication of dissolved oxygen sensors. Microelectronics International, 20, (2), 32-40. (doi:10.1108/13565360310472185).

Gratton, G.B. (2003) Tuition of prospective and refreshing microlight test pilots. UK, British Microlight Aircraft Association, 9pp. (British Microlight Aircraft Association Technical Information Leaflets, (034) ).

Gratton, G.B. and Newman, S. (2003) The 'tumble' departure mode in weightshift-controlled microlight aircraft. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 217, (3), 149-166. (doi:10.1243/095441003322297252).

Griffiths, G. (2003) Moorings recovery using the Isis deep submergence ROV. Challenger Wave, (March 2003), 4-5.

Griffiths, G., Millard, N.W., McPhail, S.D., Stevenson, P. and Challenor, P.G. (2003) On the reliability of the Autosub autonomous underwater vehicle. Underwater Technology: International Journal of the Society for Underwater Technology, 25, (4), 175-184.

Griffiths, Gwyn and Edwards, Ian (2003) AUVs: designing and operating next generation vehicles. In, Dahlin, H., Flemming, N.C., Nittis, K. and Petersson, S.E. (eds.) Building the European Capacity in Operational Oceanography: Proceedings of the Third International Conference on EuroGOOS, 3-6 December 2002, Athens, Greece. 3rd International Conference on EuroGOOS Amsterdam, The Netherlands, Elsevier, 229-236. (Elsevier Oceanography Series 69).

Grigorenko, A.N., Bending, S.J., Van Bael, M.J., Lange, M., Moshchalkov, V.V., Fangohr, H. and de Groot, P.A.J. (2003) Symmetry locking and commensurate vortex domain formation in periodic pinning arrays. Physical Review Letters, 90, (23), 237001-[4pp]. (doi:10.1103/PhysRevLett.90.237001).

Grilli, F., Costa Bouzo, M., Yang, Y., Beduz, C. and Dutoit, B. (2003) Finite element method analysis of the coupling effect between superconducting filaments of different aspect ratio. Superconductor Science and Technology, 16, (10), 1228-1234. (doi:10.1088/0953-2048/16/10/318).

Gulamali, M.Y., Lenton, T.M., Yool, A., Price, A.R., Marsh, R.J., Edwards, N.R., Valdes, P.J., Wason, J.L., Cox, S.J., Krznaric, M., Newhouse, S. and Darlington, J. (2003) GENIE: Delivering e-Science to the environmental scientist. In, Cox, Simon J. (ed.) Proceedings of UK e-Science All Hands Meeting 2003. UK e-Science All Hands Meeting 2003 Swindon, EPSRC, 145-152.

Halliday, J.A., Markvart, T. and Ross, J.N. (2003) Battery management for PV systems. Power Engineer, 17, (1), 46-46. (234).

Hardy, S.M., Maul, C. and McBride, J.W. (2003) The measurement of contact resistance by the non-linear method. In, Technical Report of The Proceeding of The Institute of Electronics, Information and Communication Engineers. Tokyo, Japan, Institute of Electronics, Information and Communication Engineers, 65-70.

Harris, N.R., Hill, M., Beeby, S., Shen, Y., White, N.M., Hawkes, J.J. and Coakley, W.T. (2003) A silicon microfluidic ultrasonic separator. Sensors and Actuators B: Chemical, 95, (1-3), 425-434. (doi:10.1016/S0925-4005(03)00448-9).

Hill, M., Harris, N.R., Townsend, R.J., White, N.M. and Beeby, S.P. (2003) A microfabricated ultrasonic particle manipulator with frequency selectable nodal planes. In, World Congress on Ultrasonics, Paris, France, 07 - 10 Sep 2003. 4pp, 1647-1650.

Hill, Martyn (2003) The selection of layer thicknesses to control acoustic radiation force profiles in layered resonators. Journal of the Acoustical Society of America, 114, (5), 2654-2661. (doi:10.1121/1.1616581).

Hirdaris, S.E., Price, W.G. and Temarel, P. (2003) Two- and three-dimensional hydroelastic modelling of a bulker in regular waves. Marine Structures, 16, (8), 627-658. (doi:10.1016/j.marstruc.2004.01.005).

Holden, C.M.E. and Keane, A.J. (2003) Use of response surface methods to aid understanding and visulatization in aircraft design. In, 5th World Congress of Structural and Multidisciplinary Optimisation (WCSMO 5), Venice, Italy, 19 - 23 May 2003. , 1-6.

Holliday, N.P., Pollard, R.T. and Griffiths, G. (2003) A comparison of simultaneous measurements from shipboard VM-150 and OS-75 acoustic Doppler current profilers. In, Proceedings of the IEEE/OES Seventh Working Conference on Current Measurement. IEEE/OES Seventh Working Conference on Current Measurement Technology USA, Institution of Electrical and Electronics Engineers, 191-196.

Hu, Zhiwei, Morfey, Christopher L. and Sandham, Neil D. (2003) Sound radiation in turbulent channel flows. Journal of Fluid Mechanics, 475, 269-302. (doi:10.1017/S002211200200277X).

Hughes, A.W., Turnock, S.R. and Abu Sharkh, S.M. (2003) Use of electromagnetic rim driven propulsor for waterjet propulsion systems. Royal Institution of Naval Architects Transactions A: International Journal of Maritime Engineering, 145, (A4), 41-52.

Islamgaliev, R.K., Yunusova, N.F., Valiev, R.Z., Tsenev, N.K., Perevezentsev, V.N. and Langdon, T.G. (2003) Characteristics of superplasticity in an ultrafine-grained Aluminum Alloy processed by ECA pressing. Scripta Materialia, 49, (5), 467-472. (doi:10.1016/S1359-6462(03)00291-4).

Jeffers, J.R.T., Browne, M. and Taylor, M. (2003) The effect of creep and load level on the damage accumulation within the cement mantle of total hip replacement. In, University of Southampton School of Engineering Sciences Postgraduate Conference, Southampton, UK, 2003. , 1181.

Jeffers, Jonathan R.T. and Taylor, Mark (2003) Mesh considerations for adaptive finite element analyses of cement failure in total hip replacement. In, Proceedings of the 2003 Summer Bioengineering Conference. 2003 Summer Bioengineering Conference New York, USA, American Society Of Mechanical Engineers (ASME), 729-730.

Jeffers, Jonathan R.T. and Taylor, Mark (2003) Residual stress decreases the life of the cement mantle in total hip replacement. In, ICCB2003. 1st International Congress on Computational Bioengineering, Zaragoza, Spain, 24 - 26 Sep 2003. , 21-26.

Jeong, H.K., Shenoi, R.A. and Dulieu-Barton, J.M. (2003) Design and production issues concerning bonded joints for segmented FRP composite hulls. In, Eighth International Marine Design Conference (I.M.D.C. 2003), Athens, Greece, 05 - 08 May 2003. 11pp, 449-459.

Jiang, Liudi, Cheung, R., Brown, R. and Mount, A. (2003) Inductively coupled plasma etching of SiC in SF6/O2 and etch-induced surface chemical bonding modifications. Journal of Applied Physics, 93, (3), 1376-1383. (doi:10.1063/1.1534908).

Jiang, Liudi, Cheung, R., Hassan, M., Harris, A.J., Burdess, J.S. and Mehregany, M. (2003) Fabrication of SiC micro-electro-mechanical systems (MEMS) using one-step dry etching. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 21, (6), 2998-3001. (doi:10.1116/1.1627804).

Jiang, Liudi, Plank, N.O.V., Cheung, R., Brown, R. and Mount, A. (2003) Surface characterisation of inductively coupled plasma etched SiC in SF6/O2. Microelectronic Engineering, 67-68, 369-375. (doi:10.1016/S0167-9317(03)00092-3).

Jiang, X., Avital, E.J. and Luo, K.H. (2003) Sound generation by vortex pairing in subsonic coaxial jets. In, Tenth International Congress on Sound and Vibration, Stockholm, Sweden, 07 - 10 Jul 2003. 8pp.

Jiao, Zhuoan, Wason, Jasmin, Molinari, Marc, Johnston, Steven and Cox, Simon J. (2003) Integrating data management into engineering applications. In, Proceedings of UK e-Science All Hands Meeting 2003, Nottingham, UK, 02 - 04 Sep 2003. Nottingham, UK, UK e-Science, 687-694.

Joyce, M.R., Reed, P.A.S and Syngellakis, S. (2003) Numerical modelling of crack shielding and deflection in a multi-layered material system. Materials Science and Engineering A, 342, (1-2), 11-22. (doi:10.1016/S0921-5093(02)00279-4).

Joyce, M.R., Styles, C.M. and Reed, P.A.S. (2003) Elevated temperature short crack fatigue behaviour in near eutectic Al-Si alloys. International Journal of Fatigue, 25, (9-11), 863-869. (doi:10.1016/S0142-1123(03)00157-9).

Kamachi, Masakazu, Furukawa, Minoru, Horita, Zenji and Langdon, Terence G. (2003) Equal-channel angular pressing using plate samples. Materials Science and Engineering, 361, (1-2), 258-266. (doi:10.1016/S0921-5093(03)00522-7).

Karpov, E.G., Stephen, N.G. and Liu, W.K. (2003) Initial tension in randomly disordered periodic lattices. International Journal of Solids and Structures, 40, (20), 5371-5388. (doi:10.1016/S0020-7683(03)00290-7).

Keane, A.J. (2003) Advanced aircraft wing optimization. In, Proceedings of Virtual Prototyping Today: Industrial Impact and Future Trends, Stezzano, Italy, 09 - 10 Nov 2006.

Keane, A.J. (2003) Wing optimization using design of experiment, response surface, and data fusion methods. Journal of Aircraft, 40, (4), 741-750.

Kim, J.W. and Lee, D.J. (2003) Characteristic interface conditions for multi-block high-order computation on singular structured grid. AIAA Journal, 41, (12), 2341-2348.

Labbe, D.F.L., Wilson, P.A., Weiss, P. and Lapierre, L. (2003) Navigation, guidance and control of an intervention Autonomous Underwater Vehicle (AUV). In, 13th Ship Systems Control Symposium, Orlando, USA, 2003.

Lam, Y.Z. and Atkinson, J.K. (2003) Screen-printed transcutaneous oxygen sensor employing polymer electrolytes. 9th International Meeting on Chemical Sensors, 41, (4), 456-463. (doi:10.1007/BF02348089).

Lam, Y.Z. and Atkinson, J.K. (2003) Screen-printed transcutaneous oxygen sensor employing polymer electrolytes. Medical and Biological Engineering and Computing, 41, (4), 456-463. (doi:10.1007/BF02348089).

Lam, Y.Z. and Atkinson, J.K. (2003) Transient and steady-state responses of thick-film oxygen sensors. Measurement, 34, (4), 355-361. (doi:10.1016/j.measurement.2003.08.011).

Lam, Yu-Zhi (Liza) (2003) Biomedical sensor for transcutaneous oxygen measurements using thick film technology. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 171pp.

Landsberg, P.T. and Markvart, T. (2003) Ideal efficiencies. In, Markvart, T. and Castaner, L. (eds.) Practical Handbook of Photovoltaics: Fundamentals and Applications. , Elsevier.

Langdon, T.G. (2003) Grain boundary sliding in creep and superplasticity: the Gifkins Decades and twenty-five years later. Materials Australia: The Magazine Of Engineering Materials Technology, 35, 5-8.

Leary, Stephen, Bhaskar, Atul and Keane, Andy (2003) Optimal orthogonal-array-based latin hypercubes. Journal of Applied Statistics, 30, (5), 585-598. (doi:10.1080/0266476032000053691).

Leary, Stephen J., Bhaskar, Atul and Keane, Andy (2003) A knowledge-based approach to response surface modelling in multifidelity optimization. Journal of Global Optimization, 26, (3), 297-319. (doi:10.1023/A:1023283917997).

Lewis, H.G. and Swinerd, G.G. (2003) Comparison of methods for predicting collision risk. In, Bendisch, Joerg (ed.) Space debris and space traffic management 2003. International Academy of Astronautics Space Debris and Space Traffic Management Symposium, held in conjunction with the 54th International Astronautical Congress (IAC) California, USA, American Astronautical Society, 207-226. (Science and Technology Series 109).

Lewis, H.G., Swinerd, G.G., Martin, C.E. and Campbell, W.S. (2003) The stability of disposal orbits at super-synchronous altitudes. In, Bendisch, Joerg (ed.) Space debris and space traffic management 2003. International Academy of Astronautics Space Debris and Space Traffic Management Symposium, held in conjunction with the 54th International Astronautical Congress (IAC) California, USA, American Astronutical Society, 151-166. (Science and Technology Series 109).

Li, Q. (2003) Numerical study of mach number effects in compressible wall-bounded turbulence. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Li, Qinling and Coleman, Gary N. (2003) DNS of an oblique shock wave impinging upon a turbulent boundary layer. In, Friedrich, Rainer, Geurts, Bernard J. and Métais, Olivier (eds.) Direct and Large-Eddy Simulation V. DLES-5: 5th International ERCOFTAC Workshop on Direct and Large-Eddy Simulation The Netherlands, Kluwer Academic, 387-396. (ERCOFTAC Series 9).

Lim, H.-C. and Lee, S.-J. (2003) PIV Measurements of near wake behind a U-grooved Cylinder. Journal of Fluids and Structures, 18, (1), 119-130. (doi:10.1016/S0889-9746(03)00086-0).

Loh, J., McBride, J., Hill, M. and Zhang, D. (2003) Analysis of linear and angular errors of a small coordinate measuring machine (SCMM). In, Laser Metrology, Machine Tool, CMM and Robot Performance. Sixth International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance (LAMDAMAP 2003) Southampton, UK, WIT Press, 245-255. (Transactions on Engineering Sciences 44). (1894).

Luo, K.H. (2003) A study of partial premixing in flames by direct numerical simulation. In, European Combustion Meeting 2003, Orleans, France, 25 - 28 Oct 2003.

Makrodimopoulos, A. and Bisbos, C.D. (2003) Shakedown analysis of plane stress problems via SOCP. In, Staat, Manfred and Heitzer, Michael (eds.) Numerical Methods for Limit and Shakedown Analysis. Jülich, Germany, John von Neumann Institute, 185-216. (Publication Series of the John von Neumann Institute for Computing (NIC) 15).

Manganelli, P., Wagermakers, B. and Wilson, P.A. (2003) Investigation of slamming loads using slam patches on a scale model of an Open 60' class yacht. Royal Institution of Naval Architects Transactions 2003 Part B1 - International Journal of Small Craft Technology, 145, (B1), 47-62. (doi:10.3940/rina.ijsct.2003.b1.6031).

Markvart, T. and Castaner, L. (2003) Principles of solar cell operation. In, Markvart, T. and Castaner, L. (eds.) Practical handbook of photovoltaics: from fundamentals to applications. , Elsevier, 71-94.

Markvart, T. and Castaner, L. (2003) Semiconductor materials and modelling. In, Markvart, T. and Castaner, L. (eds.) Practical Handbook of Photovoltaics: Fundamentals and Applications. Oxford, UK, Elsevier, 95-122.

Markvart, T. and Landsberg, P.T. (2003) Detailed balance method for thin photovoltaic converters. In, Proceedings of 16th Workshop on Quantum Solar Energy Conversion 2004. 2pp, 206-207.

Martinez, E., Natividad, E., Angurel, L.A., Navarro, R., Yang, Y. and Beduz, C. (2003) Destructive and non-destructive determination of the transport current density radial distribution: application to Bi-2212 textured rods. Physica C: Superconductivity, 385, (3), 353-362. (doi:10.1016/S0921-4534(02)02062-2).

McBride, J.W. (2003) A review of volumetric erosion studies in low voltage electrical contacts. IEICE Transactions on Electronics, E86-C, (6), 908-914.

McBride, J.W. and Maul, C. (2003) The 3D measurement and analysis of high precision surfaces. In, Technical Report of The Proceeding of The Institute of Electronics, Information and Communication Engineers. Tokyo, Japan, Institute of Electronics, Information and Communication Engineers, 33-40.

McDonald, P.C. and Torbati, M. (2003) Operational security in long-term use of cryogenically cooled receivers. Madrid, ES, European Space Agency, 16pp.

Mehrez, L., Bah, M.T., New, A.M. and Browne, M. (2003) Analysis of the factors affecting cemented hip implant performance using reliability methods. In, 1st International Congress on Computational Bioengineering, Zaragoza, Spain, 24 - 26 Sep 2003. 9pp.

Meunier, M. and Shenoi, R.A. (2003) Forced response of FRP sandwich panels with viscoelastic materials. Journal of Sound and Vibration, 263, (1), 131-151. (doi:10.1016/S0022-460X(02)01101-X).

Meurers, T., Tan, A.C.H. and Veres, S.M. (2003) Multi-tonal feedback control with improved plant and frequency estimation. In, Proceedings of the American Control Conference. American Control Conference Denver, USA, IEEE, 4937-4942.

Meurers, T., Veres, S.M., Aglietti, G. and Rogers, E. (2003) Frequency selective microvibration control of a single plate. In, Proceedings of 10th International Conference on Sound and Vibration. 10th International Conference on Sound and Vibration (ICSV10) Auburn, US, International Institute of Acoustics and Vibration, 179-186.

Meurers, T., Veres, S.M., Aglietti, G.S. and Rogers, E. (2003) Frequency selective microvibration control for a single plate. In, 10th International Congress on Sound and Vibration (ICSV10), Stockholm, SE, 07 - 10 Jul 2003.

Meurers, T., Veres, S.M. and Tan, C.H. (2003) Model-free frequency domain iterative active sound and vibration control. Control Engineering Practice, 11, (9), 1049-1059. (doi:10.1016/S0967-0661(02)00218-6).

Miao, S.H., Temarel, P. and Hampshire, J.K. (2003) Dynamic loads on a trimaran travelling in irregular seaways, including slamming. In, 3rd International Conference on Hydroelasticity in Marine Technology, Oxford, UK, 15 - 17 Sep 2003. , 185-194.

Miguel, J.M., Guilemany, J.M., Mellor, B.G. and Xu, Y.M. (2003) Acoustic emission study on WC-Co thermal sprayed coatings. Materials Science and Engineering A, 352, (1-2), 55-63. (doi:10.1016/S0921-5093(02)00546-4).

Miki, N. and Spearing, S.M. (2003) Effect of nanoscale surface roughness on the bonding energy of direct-bonded silicon wafers. Journal of Applied Physics, 94, (10), 6800-6806. (doi: 10.1063/1.1621086).

Miki, N., Zhang, X., Khanna, R., Ayón, A.A., Ward, D. and Spearing, S. M. (2003) Multi-stack silicon-direct wafer bonding for 3D MEMS manufacturing. Sensors and Actuators A: Physical, 103, (1-2), 194-201. (doi: 10.1016/S0924-4247(02)00332-1).

Millard, N.W., McPhail, S.D., Stevenson, P., Pebody, M., Perrett, J.R., Webb, A.T., Squires, M., Griffiths, G., Thorpe, S.A., Collins, M.B., Statham, P., German, C., Burkill, P.H., Stansfield, K., Smeed, D.A. and AUTOSUB Science and Engineering Teams (2003) Multidisciplinary ocean science applications of an AUV: the AUTOSUB science missions programme. In, Griffiths, G. (ed.) The technology and applications of autonomous underwater vehicles. Abingdon, UK, Taylor & Francis, 139-159. (Ocean Science and Technology 2).

Miyahara, Y., Matsubara, K., Makii, K., Horita, Z. and Langdon, T.G. (2003) Two-step process of extrusion and equal-channel angular pressing for grain refinement in Mg Alloys. In, Proceeedings of the 2nd International Symposium on Ultrafine Grained Structures, Victoria, Australia, 11 - 13 Nov 2003.

Moat, B.I. (2003) Quantifying the effects of airflow distortion on anemometer wind speed measurements from merchant ships. University of Southampton, School of Engineering Sciences, Ship Science, Doctoral Thesis , 163pp.

Molinari, Marc, Cox, Simon J. and Keane, Andy J. (2003) Grid-enabled electromagnetic optimisation (GEM) for industrial use. In, UK e-Science All Hands Meeting 2003, Nottingham, UK, 02 - 04 Sep 2003. EPSRC, 770-774.

Molland, A.F. and Barbeau, T.-E. (2003) An investigation into the aerodynamic drag on the superstructures of fast catamarans. The Transactions of the Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 145, 29-39. (IJME303).

Molland, A.F. and Karayannis, T. (2003) Technical and economic investigations of fast ferry transportation. In, Proceedings of Seventh International Conference on Fast Sea Transportation, FAST, Ischia, Italy, 07 - 10 Oct 2003.

Molland, A.F., Karayannis, T., Taunton, D.J. and Sarac-Williams, Y. (2003) Preliminary estimates of the dimensions, powering and seakeeping characteristics of fast ferries. In, IMDC Athens 2003. 8th International Marine Design Conference, Athens, Greece, 05 - 08 May 2003. Athens, Greece, School of Naval Architecture and Marine Engineering National Technical University of Athens.

Molland, A.F., Wilson, P.A. and Taunton, D.J. (2003) Resistance experiments on a systematic series of high speed displacement monohull and catamaran forms in shallow water. Southampton, UK, University of Southampton, 48pp. (Ship Science Reports, (127) ).

Molland, A.F., Wilson, P.A., Taunton, D.J. and Ghani, P.A. (2003) Numerical estimation of ship wash waves in deep and shallow water. In, Casslla, P. (ed.) FAST2003: The 7th International Conference on FAST SEA TRANSPORTATION. 7th International Conference on Fast Sea Transportation (FAST 2003) Ischia, Italy, University of Naples, 33-40. (3310).

Molleda, F., Mora, J., Molleda, F.J., Carillo, E. and Mellor, B.G. (2003) Soldering of mild steels: functional joints. Materials Characterization, 51, (5), 285-292. (doi:10.1016/j.matchar.2004.01.002).

Morfey, C.L. and Hu, Z.W. N.D. (2003) Effect of large scale structures on sound radiation from fluid flow. In, EUROMECH 449, Chamonix, France, 09 - 12 Dec 2003. EUROMECH 4494pp.

Morin, Sandrine (2003) A combined numerical and experimental study of aerofoil separation bubbles. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 146pp.

Morris, S., Wood, R.J.K., Harvey, T.J. and Powrie, H.E.G. (2003) Electrostatic charge monitoring of unlubricated sliding wear of a bearing steel. Wear, 255, (1-6), 430-443. (doi:10.1016/S0043-1648(03)00089-9).

Mwanza, M.C., Joyce, M.R., Lee, K.K., Syngellakis, S. and Reed, P.A.S. (2003) Microstructural characterisation of fatigue crack initiation in Al-based plain bearing alloys. International Journal Fatigue, 25, (9-11), 1135-1145. (doi:10.1016/S0142-1123(03)00148-8).

Nair, P.B. and Keane, A.J. (2003) An approximate solution scheme for the algebraic random Eigenvalue problem. Journal of Sound and Vibration, 260, (1), 44-65. (doi:10.1016/S0022-460X(02)00899-4).

Nayak, A.K., Moy, S.S.J. and Shenoi, R.A. (2003) Buckling and vibration of initially stressed composite sandwich plates. In, Eighth International Conference on Recent Advances in Structural Dynamics, Southampton, UK, 14 - 16 Jul 2003.

Nayak, A.K., Moy, S.S.J. and Shenoi, R.A. (2003) Quadrilateral finite elements for multilayer sandwich plates. Journal of Strain Analysis for Engineering Design, 38, (5), 377-394. (doi:10.1243/03093240360713441).

New, A.M.R., Browne, M., Barrett, D.S. and Watkins, N.D. (2003) Some factors affecting load transfer in cemented tibial components in total knee replacement. In, 1st International Congress on Computational Bioengineering, Zaragoza, Spain, 24 - 26 Sep 2003. 6pp.

New, Andrew M. (2003) Finite element modelling of thermal damage to tissue by curing bone cement in vertebroplasty. In, Proceedings of the 2003 Summer Bioengineering Conference. 2003 Summer Bioengineering Conference New York, USA, American Society Of Mechanical Engineers (ASME), 27-28.

Newman, S.J. and Takeda, K. (2003) Low cost flight simulation for light aircraft development. In, Royal Aeronautical Society, Light Aviation Group Conference: Current & Future Developments in Light Aviation 2003.

Newman, Simon, Brown, Richard, Perry, John, Lewis, Steven, Orchard, Matthew and Modha, Ajay (2003) Predicting the onset of wake breakdown for rotors in descending flight. Journal of The American Helicopter Society, 48, 28-38.

Newman, Simon, Whatley, David and Anderson, Ian (2003) Engineering design education - the integration of disciplines. Aircraft Engineering and Aerospace Technology, 75, (1), 18-26. (doi:10.1108/00022660310457257).

Ong, Y.S., Lum, K.Y., Nair, P.B., SHi, D.M. and Zhang, Z.K. (2003) Global convergence of unconstrained and bound constrained surrogate-assisted evolutionary search in aerodynamic shape design. In, Proceedings of the IEEE congress on evolutionary computation. IEEE Congress on Evolutionary Computation (CEC 2003) , Institute of Electrical and Electronics Engineers, 1856-1863. (doi:10.1109/CEC.2003.1299898).

Ong, Yew S., Nair, Prasanth B. and Keane, Andrew J. (2003) Evolutionary optimization of computationally expensive problems via surrogate modeling. AIAA Journal, 41, (4), 687-696.

Orchard, M. and Newman, S. (2003) The fundamental configuration and design of the compound helicopter. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 217, (6), 297-315(19). (doi: 10.1243/095441003772538570).

Ovenden, N.C., Rinestra, S.W., Chen, X.X. and Zhang, X. (2003) Matching strategies, propagation and radiation methods. Concluding report with recommendations and design rules. Eindhoven, The Netherlands, Eindhoven University of Technology, 41pp. (RANA Reports, (10) ).

Pang, H.T. and Reed, P.A.S. (2003) Fatigue crack initiation and short crack growth in nickel-base turbine disc alloys—the effects of microstructure and operating parameters. International Journal of Fatigue, 25, (9-11), 1089-1099. (doi: 10.1016/S0142-1123(03)00146-4).

Pashias, C. and Turnock, S.R. (2003) Hydrodynamic design of a bi-directional, rim-driven ducted thruster suitable for underwater vehicles. Southampton, UK, University of Southampton, 52pp. (Ship Science Reports, (128) ).

Pashias, C., Turnock, S.R. and Abu-Sharkh, S.M. (2003) Design optimization of a bi-directional integrated thruster. In, Proceedings of Propellors / Shafting Symposium 2003 (SNAME 13). Propellers / Shafting 2003 Symposium (SNAME 13): Technology for the 21st Century USA, Society of Naval Architects and Marine Engineers, 13pp. (1941).

Pattenden, R.J., Turnock, S.R. and Bressloff, N.W. (2003) Developments in the use of large eddy simulation for ship hydrodynamics. In, The 3rd International 'Computational Fluid Dynamics in Ship Hydrodynamics' Conference (CFD2003), London, UK, 06 - 07 Feb 2003. London, UK, Royal Institute of Naval Architects.

Pechrach, K. (2003) Arc root commutation from the contact region in low contact velocity circuit breakers. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Pechrach, K., McBride, J.W. and Weaver, P.M. (2003) Arc root mobility on piezo-actuated contacts in miniature circuit breakers. In, Proceedings of the Forty-Ninth IEEE Holm Conference on Electrical Contacts, 2003. 49th IEEE Holm Conference on Electrical Contacts USA, Institute of Electrical and Electronics Engineers, 76-83.

Pemberton, R.J., Turnock, S.R. and Rogers, E. (2003) Identification of bilge vortices within CFD simulations. Transactions of the Royal Institution of Naval Architects (Part A) - International Journal of Maritime Engineering, 145, (A1), 57-66.

Perevezentsev, V.N., Chuvil, V.N., Sysoev, A.N., Kopylov, V.I. and Langdon, T.G. (2003) Regularities of mechanical behavior in Al-Mg-Sc microcrystalline alloys during high strain rate superplasticity. Problems of Material Science, 33, (1), 400-408.

Perillo-Marcone, A., Alonso-Vazquez, A. and Taylor, M. (2003) Assessment of the effect of mesh density on the material property discretisation within QCT based FE models: a practical example using the implanted proximal tibia. Computer Methods in Biomechanics and Biomedical Engineering, 6, (1), 17-26. (doi:10.1080/1025584031000064470).

Phan, T.S. and Temarel, P. (2003) Hydrodynamic behaviour of pontoon type very large floating structure, using two- and three-dimensional methods. In, 3rd International Conference on Hydroelasticity in Marine Technology, Oxford, UK, 15 - 17 Sep 2003. , 215-226.

Plank, N., Jiang, Liudi, Gundlach, A.M. and Cheung, R. (2003) The electrical characteristics of 4H-SiC Schottky diodes after ICP etching. Journal of Electronic Materials, 32, 964.

Plank, N.O.V., Jiang, Liudi and Cheung, R. (2003) Fluorination of carbon nanotubes in CF4 plasma. Applied Physics Letters, 83, (12), 2426-2426. (doi:10.1063/1.161162).

Pound, G.E., Eres, M.H., Fairman, M.J., Xue, G., Keane, A.J. and Cox, S.J. (2003) Grid middleware for engineering design search and optimisation. In, UK e-Science All Hands Meeting 2003, Nottingham, UK, 02 - 04 Sep 2003. EPSRC, 736-743.

Pound, G.E., Eres, M.H., Wason, J.L., Jiao, Z., Keane, A.J. and Cox, S.J. (2003) A grid-enabled problem solving environment (PSE) for design optimisation within matlab. In, 17th International Parallel and Distributed Processing Symposium (IPDPS'03), Nice, France, 22 - 26 Apr 2003.

Privalov, Alexei (2003) Use of actuator disc model for modelling axial compressor dynamics. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Rawson, S.A. and McDonald, P.C. (2003) Ka-band LNA subsystem for DSA2 - design report. , European Space Agency (38).

Reed, P.A.S. (2003) Microstructural influences on notch fatigue crack initiation and propagation in a range of nickel base superalloys. In, Candra, T., Torralba, Jose Marie and Sakai, T. (eds.) Thermec 2003. International Conference on Processing & Manufacturing of Advanced Materials Switzerland, Trans Tech, 731-736. (Materials Science Forum 426-432).

Reed, P.A.S., Thomson, R.C., James, J.S., Putman, D.C., Lee, K.K. and Gunn, S.R. (2003) Modelling of microstructural effects in the fatigue of austempered ductile iron. Materials Science and Engineering A, 346, (1-2), 273-286. (doi:10.1016/S0921-5093(02)00545-2).

Richardson, R.N., Bowen, R.J. and Martin, C. (2003) The cryogenic freezing of non-metallic pipelines. In, IOR Proceedings. Carshalton, Surrey, Institute of Refrigeration, 1-12.

Richardson, R.N., Bowen, R.J. and Sharman, A. (2003) Accelerated pipe freezing in non-circular sections. Chemical Engineering Research and Design: Transactions of the Institution of Chemical Engineers, 81, (A4), 467-473. (doi:10.1205/026387603765173727).

Richardson, R.N. and Stone, H. (2003) The cooling potential of cryogens. Part 1: the early development of refrigeration and cryogenic technology. Ecolibrium, 2, 10-14.

Richardson, R.N. and Stone, H.B.J. (2003) The cooling potential of cryogens. Part 2: the properties of cryogens and their use for "high" temperature cooling. Australian Institute of Refrigeration Air Conditioning and Heating, Ecolibrium, 18-22.

Roberts, D.C., Li, H., Steyn, J.L., Yaglioglu, O., Spearing, S.M., Schmidt, M.A. and Hagood, N.W. (2003) A piezoelectric microvalve for compact high frequency high differential pressure micropumping systems. Journal of Microelectromechanical Systems, 12, (1), 81-92. (doi: 10.1109/JMEMS.2002.807471).

Rometsch, P.A., Starink, M.J. and Gregson, P.J. (2003) Improvements in quench factor modelling. Materials Science and Engineering A, 339, (1-2), 255-264. (doi:10.1016/S0921-5093(02)00110-7).

Ruhrmann, Andreas and Zhang, Xin (2003) Influence of diffuser angle on a bluff body in ground effect. Journal of Fluids Engineering, Transactions of the ASME, 125, (2), 332-338. (doi:10.1115/1.1537252).

Sahin, M. and Shenoi, R.A. (2003) Quantification and localisation of damage in beam-like structures by using artificial neural networks with experimental validation. Engineering Structures, 25, (14), 1785-1802. (doi:10.1016/j.engstruct.2003.08.001).

Sahin, M. and Shenoi, R.A. (2003) Vibration-based damage identification in beam-like composite laminates by using artificial neural networks. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217, (6), 661-676. (doi:10.1243/095440603321919581).

Sandham, N.D., Yao, Y.F. and Lawal, A.A. (2003) Large eddy simulation of transonic turbulent flow over a bump. International Journal of Heat and Fluid Flow, 24, (4), 584-595. (doi:10.1016/S0142-727X(03)00052-3).

Scurr, A.D., Keane, A.J., Sobester, A., Gould, A. and Leary, S. (2003) A grid-based problem solving environment that uses the Master/Worker paradigm to parallelize DoE/RSM/Data-Fusion search computations. In, Fifth World Congress of Structural and Multidisciplinary Optimization (WCSMO-5), Venice, Italy, 19 - 23 May 2003. Milan, Italy, Schonenfeld and Ziegler31pp.

Setiawan, R., Syngellakis, S. and Hill, M. (2003) Composite plate mechanical characterisation through dynamic tests: a numerical simulation. In, 5th International Symposium on Advanced Composites. Advances in Composite Technology, Corfu, Greece, 05 - 07 May 2003. The University of Patras. Department of Mechanical Engineering & Aeronautics7pp.

Shen, Yijun (2003) Modelling the electro-acoustic characteristics of flow-through ultrasonic separators. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Shim, D.J., Burianek, D.A., Anderlisten, R. and Spearing, S.M. (2003) Fatigue crack growth prediction in GLARE hybrid laminates. Composites Science and Technology, 63, (12), 1759-1767. (doi: 10.1016/S0266-3538(03)00082-4).

Shim, I.B., Kim, J.W. and Lee, D.J. (2003) Numerical study of n-wave propagation using optimized compact finite difference schemes. AIAA Journal, 41, (2), 316-319.

Skinner, J.A., Todo, S., Taylor, M., Wang, J.S., Pinskerova, V. and Scott, G. (2003) Should the cement mantle around the femoral component be thick or thin? Journal of Bone and Joint Surgery, 85B, (1), 45-51. (doi: 10.1302/0301-620X.85B1.13055).

Song, Wenbin, Keane, Andy and Cox, Simon (2003) CFD-based shape optimisation with grid-enabled design search toolkits. In, UK e-Science All Hands Meeting 2003, Nottingham, UK, 02 - 04 Sep 2003. EPSRC, 619-627.

Song, Wenbin, Keane, Andy, Eres, M.H., Pound, Graeme and Cox, Simon (2003) Two dimensional airfoil optimisation using CFD in a grid computing environment. In, Euro-Par 2003 Parallel Processing: 9th International Euro-Par Conference Klagenfurt, Austria, August 26-29, 2003 Proceedings. Euro-Par 2003: International Conference on Parallel and Distributed Computing , SpringerLink, 525-532. (Lecture Notes in Computer Science, 2790). (doi:10.1007/b12024).

Soutis, C. and Spearing, S.M. (2003) Compressive response of notched, woven fabric, face sheet honeycomb sandwich panels. Plastics, Rubber and Composites, 31, (9), 392-397. (doi: 10.1179/14658010225006369).

Srikar, V.T. and Spearing, S.M. (2003) A critical review of microscale mechanical testing methods used in the design of microelectromechanical systems. Experimental Mechanics, 43, (3), 228-237. (doi: 10.1177/00144851030433003).

Srikar, V.T. and Spearing, S.M. (2003) Materials selection for microfabricated electrostatic actuators. Sensors and Actuators A: Physical, 102, (3), 279-285. (doi: 10.1016/S0924-4247(02)00393-X).

Srikar, V.T. and Spearing, S.M. (2003) Materials selection in micromechanical design: an application of the Ashby approach. Journal of Microelectromechanical Systems, 12, (1), 3-10. (doi: 10.1109/JMEMS.2002.807466).

Srikar, V.T., Swan, A.K., Unlu, M.S., Goldberg, B.B. and Spearing, S.M. (2003) Micro-Raman measurement of bending stresses in micromachined silicon flexures. Journal of Microelectromechanical Systems, 12, (6), 779-787. (doi: 10.1109/JMEMS.2003.820280).

Starink, M.J. (2003) The determination of activation energy from linear heating rate experiments: a comparison of the accuracy of isoconversion methods. Thermochimica Acta, 404, (1), 163-176. (doi:10.1016/S0040-6031(03)00144-8).

Starink, M.J. and Li, X.M. (2003) A model for the electrical conductivity of peak-aged and overaged Al-Zn-Mg-Cu alloys. Metallurgical and Materials Transactions A, 34A, (4), 899-911.

Starink, M.J. and Wang, S.C. (2003) A model for the yield strength of Al-Zn-Mg-Cu alloys. Acta Materialia, 51, (17), 5131-5150. (doi:10.1016/S1359-6454(03)00363-X).

Starink, M.J. and Yan, J. (2003) A model for strengthening of Al-Cu-Mg alloys by S phase. In, 1st International Symposium on Metallurgical Modeling for Aluminum Alloys, ASM Materials Solutions, Pittsburgh, USA, 12 - 15 Oct 2003. 8pp, 119-126.

Starink, M.J., Yan, J., Davin, L., Gao, N. and Cerezo, A. (2003) The mechanisms of cluster hardening of Al-Cu-Mg alloys. In, ICSMA13, Budapest, Hungary, 25 - 30 Aug 2003. , 57.

Starink, Marco, Li, Xiaomei and Wang, Shuncai (2003) Models for the yield strength of Al-Zn-Mg-Cu alloys. In, Tiryakioglu, M. and Lalli, L.A. (eds.) Proceedings of the 1st International Symposium on Metallurgical Modeling for Al Alloys. 1st International Symposium on Metallurgical Modeling for Al Alloys USA, ASM International, 105-118.

Stark, J.P.W. and Swinerd, G.G. (2003) Mission analysis. In, Fortescue, Peter, Stark, John and Swinerd, Graham (eds.) Spacecraft systems engineering, 3rd edition. , Wiley & Sons, 111-167.

Stark, J.P.W., Swinerd, G.G. and Fortescue, P.W. (2003) Celestial mechanics. In, Stark, J.P.W., Swinerd, G.G. and Fortescue, P.W. (eds.) Spacecraft systems engineering, 3rd edition. , Wiley & Sons, 79-109.

Stark, J.P.W., Swinerd, G.G. and Tatnall, A.R.L. (2003) Introduction. In, Fortescue, Peter, Stark, John and Swinerd, Graham (eds.) Spacecraft systems engineering, 3rd edition. , Wiley & Sons, 1-9.

Stevenson, P. and Graham, D. (2003) Advanced materials and their influence on the structural design of AUVs. In, Griffiths, G. (ed.) The technology and applications of autonomous underwater vehicles. Abingdon, UK, Taylor & Francis, 77-91. (Ocean Science and Technology 2).

Syngellakis, Stavros (2003) Boundary element methods for polymer analysis. Engineering Analysis with Boundary Elements, 27, (2), 125-135. (doi:10.1016/S0955-7997(02)00090-5).

Syngellakis, Stavros and Wu, J. (2003) Boundary element applications to polymer fracture. In, BETECH 2003 15th International Conference on Boundary Element Technology, Detroit, USA, 19 - 21 May 2003. The Wessex Institute of Technology, 83-92.

Takeda, K. and Newman, S.J. (2003) Flying high at university: flight simulation in the lecture theatre. In, ASEE 2003 Annual International Conference and Exposition in Engineering Education, Nashville, USA, 22 - 25 Jun 2003.

Takeda, K., Zhang, X. and Nelson, P.A. (2003) Linearized Euler simulations of leading-edge slat flow. In, 41st Aerospace Sciences Meeting and Exhibit, Reno, NV, USA, 6-9 Jan 2003, Reno, NV, USA, USA, AIAA10pp, 1-10.

Takeda, Kenji and Newman, Simon J. (2003) Flying high at university: flight simulation in the lecture theatre. In, Royal Aeronautical Society - Ballantyne Lecture 2003: Flight Simulation - Just a Game?, London, UK, Feb 2003. (Submitted).

Tan, Cheng Hock (2003) Frequency segmented estimation in real-time active noise control. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 154pp.

Tan, K.H. and Taylor, M. (2003) Influence of simulating the collateral ligaments when modelling total knee replacement. In, Proceedings of the International Congress on Computational Bioengineering, Zaragoza, Spain, 24 - 26 Sep 2003. , 670-675.

Tan, K.S., Wood, R.J.K. and Stokes, K.R. (2003) The slurry erosion behaviour of high velocity oxy-fuel (HVOF) sprayed aluminium bronze coatings. Wear, 255, (1-6), 195-205. (doi:10.1016/S0043-1648(03)00088-7).

Tan, Kheng H., Costigan, Patrick and Taylor, Mark (2003) Dynamic simulations of a total knee replacement: assessing the performance envelope using patient specific loads. In, 2003 Summer Bioengineering Conference, Florida, USA, 25 - 29 Jun 2003. , 725-726.

Tao, Feng, Chen, Liming, Shadbolt, Nigel, Pound, Graeme and Cox, Simon (2003) Towards the semantic grid: putting knowledge to work in design optimisation. In, I-KNOW '03 International Conference on Knowledge Management, Graz, Austria, 02 - 04 Jul 2003.

Tao, Feng, Cox, Simon, Chen, Liming, Shadbolt, Nigel, Xu, Fenglian, Puleston, Colin, Goble, Carole and Song, Wenbin (2003) Towards the semantic grid: enriching content for management and reuse. In, UK e-Science All Hands Meeting 2003, Nottingham, UK, 02 - 04 Sep 2003. EPSRC.

Tatem, A.J., Lewis, H.G., Atkinson, P.M. and Nixon, M.S. (2003) Increasing the spatial resolution of agricultural land cover maps using a Hopfield neural network. International Journal of Geographical Information Science, 17, (7), 647-672. (doi:10.1080/1365881031000135519).

Tatnall, A.R.L., Farrow, J.B. and Francis, C.R. (2003) Spacecraft system engineering. In, Fortescue, Peter, Stark, John and Swinherd, Graham (eds.) Spacecraft Systems Engineering 3rd Edition. , Taylor & Francis, 613-657.

Taylor, M. and Barrett, D.S. (2003) Explicit finite element simulation of eccentric loading in total knee replacement. Clinical Orthopaedics and Related Research, 414, (162-171), 162-171. (doi:10.1097/01.blo.0000079267.91782.58).

Thomas, T.G., Yao, Y.F. and Sandham, N.D. (2003) Structure and energetics of a turbulent trailing edge flow. Computers and Mathematics with Applications, 46, (4), 671-680. (doi:10.1016/S0898-1221(03)90024-1).

Thornycroft, J. and Markvart, T. (2003) Grid-connection of PV generators: technical and regulatory issues. In, Markvart, T. and Castaner, L. (eds.) Practical handbook of photovoltaics: fundamentals and applications. , Elsevier, 635-654.

Toda, H., Sinclair, I., Buffière, J.-Y., Maire, E., Connolley, T., Joyce, M., Khor, K.H. and Gregson, P. (2003) Assessment of the fatigue crack closure phenomenon in damage-tolerant aluminium alloy by in-situ high-resolution synchrotron X-ray microtomography. Philosophical Magazine, 83, (21), 2429-2448. (doi:10.1080/1478643031000115754).

Turnock, S.R., Wright, A.M., Hudson, D.A., Keane, A.J. and Cox, S.J. (2003) Development of a web based, collaborative working environment for maritime computational fluid dynamics. In, Marnet CFD Meeting, Portsmouth, UK, 20 - 21 Mar 2003. 4pp.

Veres, S.M. (2003) Exploratory modelling for controller optimisation. In, 13th IFAC Symposium on System Identification, Rotterdam, The Netherlands, 27 - 29 Aug 2003. , 15-20.

Veres, S.M., Baramov, L., Tutty, O.R. and Rogers, E., Veres, S M (ed.) (2003) Iterative design for active control of fluid flow. International Journal of Control, 76, (14), 1375-1386. (doi:10.1080/0020717031000156386).

Veres, S.M., Tan, A.C.H., Meurers, T., Aglietti, G. and Rogers, E. (2003) Application of exploratory modelling to active headrest control. In, The 42nd IEEE Conference on Decision and Control, Hawaii, USA, 09 - 12 Dec 2003. , 3936-3941.

Vlassak, J.J., Ciavarella, M., Barber, J.R. and Wang, X. (2003) The indentation modulus of elastically anisotropic materials for indenters of arbitrary shape. Journal of the Mechanics and Physics of Solids, 51, (9), 1701-1721. (doi:10.1016/S0022-5096(03)00066-8).

Voutchkov, I.I., Keane, A.J., Bhaskar, A. and Olsen, T.-M. (2003) A fast model for sequential cominatorial optimisation problems in finite element studies: applications in aerospace welding. In, Proceedings of the International Conference on Metal Fabrication and Welding Technology (MetFab 2003), Nottingham, England, Sep 2003.

Walker, S.J.I. and Aglietti, G.S. (2003) A study into the dynamics of three dimensional tape spring folds. In, Proceedings of the 44th AIAA/ASMA/ASCE/AHS Structures, Structural Dynamics and Materials Conference. 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference AIAA2003 Virginia, USA, American Institute of Aeronautics and Astronautics, 886-896.

Walmsley, R. (2003) Buying boats: comparing lifeboats and nuclear submarines. Southampton, UK, University of Southampton, 38pp. (Ship Science Reports, (129) ).

Wang, Jiang-Sheng, Taylor, Mark, Flivik, Gunnar and Lidgren, Lars (2003) Factors affecting the static shear strength of the prosthetic-bone cement interface. Journal of Materials Science: Materials in Medicine, 14, (1), 55-61. (doi:10.1023/A:1021501520479).

Wang, L. and Hope, A.D. (2003) A systematic procedure for the application of artificial neural networks to pump fault diagnosis. In, Proceedings of the International Conference on Condition Monitoring, Oxford, UK, 02 - 04 Jul 2003. , 477-490.

Wang, L., Wood, R.J.K., Harvey, T.J., Morris, S., Powrie, H.E.G. and Care, I. (2003) Feasibility of using electrostatic monitoring for oil lubricated ceramics to steel sliding contacts. In, Dowson, D., Priest, M., Dalmaz, G. and Lubrecht, A.A. (eds.) Tribological Research and Design for Engineering Systems. 29th Leeds-Lyon Symposium on Tribology the Netherlands, Elsevier, 625-635. (Tribology Series, 41).

Wang, L., Wood, R.J.K., Harvey, T.J., Morris, S., Powrie, H.E.G. and Care, I. (2003) Wear performance of oil lubricated silicon nitride sliding against various bearing steels. Wear, 255, (1-6), 657-668. (doi:10.1016/S0043-1648(03)00045-0).

Wang, S.C., Aindow, M. and Starink, M.J. (2003) Effect of self-accommodation on α/α boundary populations in pure titanium. Acta Materialia, 51, (9), 2485-2503. (doi:10.1016/S1359-6454(03)00035-1).

Wang, S.C. and Starink, M.J. (2003) A simple approach of determination of the crystallographic orientation: Applications and accuracy. Journal of Microscopy, 211, (2), 130-136. (doi:10.1046/j.1365-2818.2003.01206.x).

Wang, W., Makarov, G. and Shenoi, R.A. (2003) Investigating high strain rate behaviour of unidirectional composites by a visco-elastic model. In, Proceedings of The International Symposium on Naval Architecture and Ocean Engineering, Shanhai, China, Sep 2003.

Wang, W. and Shenoi, R.A. (2003) Delamination modelling of a curved composite beam subjected to an opening bending moment. Journal of Strain Analysis for Engineering Design, 38, (5), 453-457. (doi:10.1243/03093240360713504).

Wason, Jasmin, Molinari, Marc, Jiao, Zhuoan and Cox, Simon J. (2003) Delivering data management for engineers on the grid. In, Kosch, Harald, Böszörményi, László and Hellwagner, Hermann (eds.) Euro-Par 2003 Parallel Processing: 9th International Euro-Par Conference Klagenfurt, Austria, August 26-29 2003. Euro-Par 2003 Parallel Processing: 9th International Euro-Par Conference , Springer, 412-416. (Lecture Notes in Computer Science, 2790). (doi:10.1007/b12024).

Weaver, P.M., McBride, J.W. and Siew, C.C. (2003) Integrated measurement system for high speed unsteady plasma flow and its application to electric arcs. IEE Proceedings - Science, Measurement and Technology, 150, (4), 153-160. (doi:10.1049/ip-smt:20030585).

Weiss, P., Catret Mascarell, J.V., Badica, M., Labbe, D.F.L., Lapierre, L., Brignone, L. and Wilson, P. A. (2003) FREESUB: Modular control system for intervention AUVS (IAUV). In, 13th International Symposium on Unmanned Untethered Submersible Technology, Durham, USA,

Weiss, P., Catret Mascarelli, J.V., Grossnet, D., Brignone, L., Labbe, D.F.L. and Wilson, P.A. (2003) FREESUB: Dynamic stabilization and docking for autonomous underwater vehicles. In, 13th International Symposium on Unmanned Untethered Submersible Technology, Durham, USA,

Wharton, J.A., Ross, D.H., Treacy, G.M., Wilcox, G.D. and Baldwin, K.R. (2003) An EXAFS investigation of molybdate-based conversion coatings. Journal of Applied Electrochemistry, 33, 553-561.

Wharton, J.A. and Wood, R.J.K. (2003) The influence of Reynolds number on flow corrosion of austentic stainless steels in 3.5% NaCl solution. In, NACE Corrosion 2003, Texas, USA, NACE International.

Wharton, J.A., Wood, R.J.K. and Mellor, B.G. (2003) Wavelet analysis of electrochemical noise measurements during corrosion of austenitic and superduplex stainless steels in chloride media. Corrosion Science, 45, (1), 97-122. (doi:10.1016/S0010-938X(02)00140-3).

Wheeler, D.W. and Wood, R.J.K. (2003) CVD diamond: erosion resistant hard material. Surface Engineering, 19, (6), 466-470. (doi:10.1179/026708403225010127).

White, C.B., Chambers, A.R. and Roberts, G.T. (2003) Carbon-based atomic oxygen sensors. Proceedings of the 2nd IEEE International Conference on Sensors, 2, 1287-1292. (doi:10.1109/ICSENS.2003.1279152).

White, C.B., Rao, J., Roberts, G.T., Chambers, A.R., Lawson, K.J. and Nicholls, J.R. (2003) The development of carbon-based sensors for the measurement of atomic oxygen. In, Proceedings of the 9th International Symposium on Materials in a Space Environment. 9th International Symposium on Materials in a Space Environment , ESA, 137-144. (European Space Agency Special Publication 540). (2003mse..symp..137W).

Wilson, P. A., Harris, C.J. and Hong, X. (2003) A line of sight counteraction navigation algorithm for ship encounter collision avoidance. Journal of Navigation, 56, (1), 111-121. (doi:10.1017/S0373463302002163).

Wong, Au S., Isaac, Graham, New, Andrew M.R. and Taylor, Mark (2003) Influence of bone quality on the initial stability of cementless hip stem in total hip arthroplasty. In, Proceedings of the 2003 Summer Bioengineering Conference. 2003 Summer Bioengineering Conference New York, USA, American Society Of Mechanical Engineers (ASME), 25-26.

Wood, R.J.K. and Jones, T.F. (2003) Investigations of sand-water induced erosive wear of AISI 304L stainless steel pipes by pilot-scale and laboratory-scale testing. Wear, 255, (1-6), 206-218. (doi:10.1016/S0043-1648(03)00095-4).

Wu, A., Syngellakis, S. and Mellor, B.G. (2003) Finite element prediction of residual stresses in a fillet welded T-joint. In, 6th International Conference on Trends in Welding Research , 832-837.

Xing, J.T., Price, W.G. and Chen, Y.G. (2003) A mixed finite-element finite-difference method for nonlinear fluid-structure interaction dynamics. I. Fluid-rigid structure interaction. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 459, (2038), 2399-2430. (doi: 10.1098/rspa.2002.1110).

Xing, J.T., Price, W.G. and Wang, Z.H. (2003) A substructure approach to power flow analysis and application to engineering structures. Proceedings of 8th international conference on recent advances in structural dynamics, paper number 101, Southampton, July 14-16 (1759).

Xing, Jing Tang (2003) Book Review.Fluid-Structure Interaction. Strain: An International Journal for Experimental Mechanics, 39, (4), 186. (doi: 10.1046/j.0039-2103.2003.00067.x).

Xing, Jing Tang, Price, W.G. and Xiong, Y.P. (2003) Substructure-subdomain methods for power flow analysis of fluid-structure interaction dynamics. Proceedings of 10th international congress on sound and vibration, 7-10 July, Stockholm, Sweden, 1115-1122. (1818).

Xiong, Y.P., Xing, J.T. and Price, W.G. (2003) Active vibration control of a human body-seat-boat-water dynamic interaction system excited by progressive waves. Proceedings of 8th international conference on recent advances in structural dynamics, Paper number 0011, Southampton, July 14-16 (CD-ROM).

Xiong, Y.P., Xing, J.T. and Price, W.G. (2003) A general linear mathematical model of power flow analysis and control for integrated structure-control systems. Journal of Sound and Vibration, 267, (2), 301-334. (doi:10.1016/S0022-460X(03)00194-9).

Xiong, Y.P., Xing, J.T. and Price, W.G. (2003) Power flow analysis of an equipment-nonlinear isolator-flexible ship interaction system excited by progressive sea waves. Proceedings of 10th international congress on sound and vibration,7-10 July, Stockholm, Sweden, 4841-4848. (1819).

Xu, Cheng, Furukawa, Minoru, Horita, Zenji and Langdon, Terence G. (2003) Using ECAP to achieve grain refinement, precipitate fragmentation and high strain rate superplasticity in a spray-cast aluminum alloy. Acta Materialia, 51, (20), 6139-6149. (doi:10.1016/S1359-6454(03)00433-6).

Xu, Fenglain and Cox, Simon J. (2003) Workflow tool for engineers in a grid-enabled Matlab environment. In, UK E-Science All Hands Meeting 2003, Nottingham, UK, 02 - 04 Sep 2003. EPSRC, 212-215.

Xu, Fenglian, Eres, M.H. and Cox, Simon (2003) Short message service in a grid-enabled computing environment. In, Kosch, Harald, Böszörményi, László and Hellwagner, Hermann (eds.) Euro-Par 2003 Parallel Processing: 9th International Euro-Par Conference Klagenfurt, Austria, August 26-29, 2003 Proceedings. Euro-Par 2003 Parallel Processing: 9th International Euro-Par Conference , Springer, 1148-1152. (Lecture Notes in Computer Science 2790). (doi:10.1007/b12024).

Xu, Y.M. and Mellor, B.G. (2003) A comparative study of the wear resistance of thermoplastic and thermoset coatings. Wear, 255, (1-6), 722-733. (doi:10.1016/S0043-1648(03)00064-4).

Xue, Gang, Fairman, Matthew J., Pound, Graeme and Cox, Simon J. (2003) Implementation of a grid computation toolkit for design optimisation with matlab and condor. In, Kosch, Harald, Böszörményi, László and Hellwagner, Hermann (eds.) Euro-Par 2003 Parallel Processing: 9th International Euro-Par Conference Klagenfurt, Austria, August 26-29, 2003 Proceedings. Euro-Par 2003 Parallel Processing: 9th International Euro-Par Conference , Springer, 357-365. (Lecture Notes in Computer Science 2790). (doi:10.1007/b12024).

Yang, N. and Sinclair, I. (2003) Fatigue crack growth in a particulate TiB2 reinforced powder metallurgy iron-based composite. Metallurgical and Materials Transactions A, 34, (9), 2017-2024.

Yang, Yifeng, Young, E.A., Beduz, C., Su, X.D. and Flukiger, R. (2003) Significant reduction of AC losses in Ag sheathed square Bi,Pb(2223) wires with twisted filaments. IEEE Transactions on Applied Superconductivity, 13, (2), 3606-3609. (doi:10.1109/TASC.2003.812409).

Yao, Y.F. and Sandham, N.D. (2003) Direct simulation of transitional shock boundary-layer interactions at Mach 2. In, Armfield, S., Morgan, P. and Srinivas, K. (eds.) Computational Fluid Dynamics 2002: Proceedings of the Second International Conference on Computational Fluid Dynamics. Second International Conference on Computational Fluid Dynamics (ICCFD) Guildford, UK, Springer, 629-634.

Yao, Y.F., Savill, A.M., Sandham, N.D. and Dawes, W.N. (2003) Simulation of modelling of turbulent trailing edge flow. Flow, Turbulence and Combustion, 68, (4), 313-333. (doi: 10.1023/A:1021755327045).

Yorke, C. P. and Coleman, G. N. (2003) Effect of application and removal of adverse pressure gradient to turbulent wall layers. In, Fifth Workshop on DNS and LES: DLES-5, Munich University of Technology, Germany, August 27-29, 2003 , 517-524.

Young, E.A., Yang, Y., Lehmann, M., Riddle, R. and Beduz, C. (2003) Reduction in secondary phases and increased transport I(c) of (Bi,Pb)2223/Ag tapes sintered with rapid heating rates. IEEE Transactions on Applied Superconductivity, 13, (2), 2941-2944. (doi:10.1109/TASC.2003.812062).

Zaporojtchenko, V., Zekonyte, J., Erichsen, J. and Faupel, F. (2003) Etching rate and structural modification of polymer films during low energy ion irradiation. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 208, 155-160. (doi:10.1016/S0168-583X(03)00625-6).

Zaporojtchenko , V, Zekonyte, J., Biswas, A. and Faupel, F. (2003) Controlled growth of nano-size metal clusters on polymers by using VPD method. [in special issue: Proceedings of the 7th International Conference on Nanometer-Scale Science and Technology and the 21st European Conference on Surface Science] Surface Science, 532-535, 300-305. (doi:10.1016/S0039-6028(03)00128-6).

Zekonyte, J., Erichsen, J., Zaporojtchenko, V. and Faupel, F. (2003) Mechanisms of argon ion-beam surface modification of polystyrene. Surface Science, 532-535, 1040-1044. (doi:10.1016/S0039-6028(03)00130-4).

Zhang, D., Hill, M., McBride, J. and Loh, J. (2003) Form evaluation algorithms in coordinate metrology. In, Laser Metrology, Machine Tool, CMM and Robot Performance. Sixth International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance (LAMDAMAP 2003) Southampton, UK, WIT Press, 273-283. (Transactions on Engineering Sciences 44). (1895).

Zhang, Defen (2003) The assessment and application of form evaluation algorithms in coordinate metrology. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Zhang, X. (2003) Computation of sound radiation from ducts with flow. In, EUROMECH Colloquium no 449. Computational Aeroacoustics: From Acoustic Sources Modeling to Far-Field Radiated Noise Prediction, Chamonix, France, 09 - 12 Dec 2003. 72pp.

Zhang, X., Chen, X.X., Morfey, C.L. and Nelson, P.A. (2003) Acoustic radiation from a semi-infinite duct with a subsonic jet. In, 41st AIAA Aerospace Sciences Meeting, Reno, USA, 06 - 09 Jan 2003. 8pp.

Zhang, X., Chen, X.X., Morfey, C.L. and Tester, B.J. (2003) Computation of fan noise radiation through a realistic engine exhaust geometry with flow. In, 9th AIAA/CEAS Aeroacoustics Conference and Exhibit, Hilton Head, South Carolina,12-14 May, 2003

Zhang, Xin (2003) The evolution of co-rotating vortices in a canonical boundary layer with inclined jets. Physics of Fluids, 15, (12), 3693-3702. (doi:10.1063/1.1624609).

Zhang, Xin, Chen, Kuo-Shen and Spearing, S.Mark (2003) Thermal mechanical behavior of thick PECVD for oxide films power MEMS applications. Sensors and Actuators A: Physical, 103, (1-2), 263-270. (doi: 10.1016/S0924-4247(02)00343-6).

Zhang, Xin and Zerihan, Jonathan (2003) Aerodynamics of a double-element wing in ground effect. AIAA Journal, 41, (6), 1007-1016.

Zhang, Xin and Zerihan, Jonathan (2003) Off-surface aerodynamic measurements of a wing in ground effect. Journal of Aircraft, 40, (4), 716-725. (2068).

Zhao, S., Xing, J.T., Price, W.G. and Chen, Y.G. (2003) The numerical analysis of a two dimensional nonlinear beam water interaction system. Hydroelasticity 2003: 3rd International Conference on Hydroelasticity in Marine Technology, Oxford, UK, 15 - 17 Sep 2003. Oxford, UK, Oxford University, 75-84.

Zheng, Y., Atkinson, J.K., Sion, R.P. and Zhang, Z. (2003) An evaluation of materials and processes employed in the construction of novel thick film force sensors. Microelectronics International, 20, (1), 31-33.

Zheng, Yulan (2003) Characterisation and development of novel thick film strain gauges. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Zheng, Yulan, Atkinson, John and Sion, Russell (2003) An explanation of thermal behaviour of thick film strain gauges. Journal of Physics D: Applied Physics, 36, (9), 1153-1158. (doi: 10.1088/0022-3727/36/9/314).

Zhilyaev, A.P., Gubicza, J., Surinach, S., Baro, M.D. and Langdon, T.G. (2003) Calorimetric and X-ray measurements in ultrafine-grained nickel. In, Candra, T., Torralba, Jose Maria and Sakai, T. (eds.) THERMEC'2003. 4th International Conference on Processing & Manufacturing of Advanced Materials Switzerland, Trans Tech, 4507-4512. (Materials Science Forum 426-432).