Browse by Divisions pre August 2011

Markvart, Tom and Castaner, Luis (eds.) (2004) Solar cells: materials, manufacture and operation, Oxford, UK, Elsevier, 556pp.

Abu Sharkh, S.M. and Abu-Sara, M.A. (2004) Current control of utility-connected two-level and three-level PWM inverters. European Power Electronics and Drives Journal, 14-4, (3), 13-18.

Abu Sharkh, S.M. and Lai, S.H. (2004) Finite element analysis of a miniature electric thruster. In, The Eleventh Biennial Conference On Electromagnetic Field Computation, Seoul, Korea, 06 - 09 Jun 2004. , 235.

Abu Sharkh, S.M., Lai, S.H. and Turnock, S.R. (2004) Structurally integrated brushless PM motor for miniature propeller thrusters. IEE Proceedings - Electric Power Applications, 151, (5), 513-519. (doi:10.1049/ip-epa:20040736).

Abu Sharkh, S.M., Mohammad, M.T.N. and Lai, S.H. (2004) Axial gap permanent magnet dc motor with iron powder armature. In, UK Magnetics Society Seminar on Soft Magnetic Composites and their use in Electrical Machines, Wantage, Oxon, UK Magnetics Society.

Abu-Sara, Mohammad (2004) Digital control of utility and parallel connected three-phase PWM inverters. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 224pp.

Abu-Sharkh, Suleiman and Doerffel, Dennis (2004) Rapid test and non-linear model characterisation of solid-state lithium-ion batteries. Journal of Power Sources, 130, (1-2), 266-274. (doi:10.1016/j.jpowsour.2003.12.001).

Adams, Mark and Newman, Simon (2004) The tail boom strake. Aircraft engineering and Aerospace Technology, 76, (2), 143-159. (doi:10.1108/00022660410526015).

Afferante, L. and Ciavarella, M. (2004) Frictionally excited thermoelastic instability in the presence of contact resistance. Journal of Strain Analysis, 39, (4), 351-357.

Afferante, L. and Ciavarella, M. (2004) Instability of thermoelastic contact for two half-planes sliding out-of-plane with contact resistance and frictional heating. Journal of the Mechanics and Physics of Solids, 52, (7), 1527-1547. (doi:10.1016/j.jmps.2004.01.003).

Afferante, L. and Ciavarella, M. (2004) The thermoelastic Aldo contact model with frictional heating. Journal of the Mechanics and Physics of Solids, 52, (3), 617-640. (doi:10.1016/S0022-5096(03)00116-9).

Afferante, L., Ciavarella, M. and Demelio, G. (2004) A re-examination of rolling contact fatigue experiments by Clayton and Su with suggestions for surface durability calculations. Wear, 256, (3-4), 329-334. (doi:10.1016/S0043-1648(03)00408-3).

Aglietti, G.S. and Schwingshackl, C. (2004) Analysis of enclosures and anti vibration devices for electronic equipment for space applications. In, Proceedings of the 6th International Conference on Dynamics and Control of Systems and Structures in Space 2004. 6th International Conference on Dynamics and Control of Systems and Structures in Space 2004 , Associazione Italiana di Aeronautica e Astronautica, 261-270.

Ahmed, T.M., Hudson, D.A. and Temarel, P. (2004) Incorporation of steady flow effects in linear three-dimensional seakeeping predictions for high speed hulls. In, Proceedings 9th International Symposium Practical Design of Ships and Other Floating Structures , 496-503.

Alonso-V'azquez, Ana, Lauge-Pedersen, Henrik, Lidgren, Lars and Taylor, M. (2004) The effect of bone quality on the initial stability of ankle arthrodesis with internal fixation. A finite element simulation. Foot and Ankle International, 25, (11), 840-850.

Alonso-Vazquez, A., Lauge-Pederson, H., Lidgren, L. and Taylor, M. (2004) Influence of bone quality in the initial stability of ankle arthrodesis. A finite element study. At 14th European Society of Biomechanics Conference (ESB 2004), Hertogenbosch, Netherlands, 04 - 07 Jul 2004.

Alonso-Vázquez, Ana, Lauge-Pederson, Henrik, Lidgren, Lars and Taylor, Mark (2004) Initial stability of ankle arthrodesis with three-screw fixation. A finite element analysis. Clinical Biomechanics, 19, (7), 751-759. (doi:10.1016/j.clinbiomech.2004.04.014).

Ashcroft, Graham Ben (2004) A computational and experimental investigation into the aeroacoustics of low speed flows. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Baertsch, Chelsey D., Jensen, Klavs F., Hertz, Joshua L., Tuller, Harry L., Srikar T., Vengallatore, Spearing, S. Mark and Schmidt, Martin A. (2004) Fabrication and structural characterization of self-supporting electrolyte membranes for a micro solid-oxide fuel cell. Journal of Materials Research, 19, (9), 2604-2615. (doi: 10.1557/JMR.2004.0350).

Bah, M.T. and Browne, M. (2004) Failure of the cement mantle in hip implants: a probabilistic approach. In, 50th Annual Meeting of the Orthopaedic Research Society, San Francisco, USA, 07 - 10 Mar 2004. San Francisco, USA, Orthopaedic Research Society.

Bah, M.T., Browne, M. and New, A.M. (2004) Probabilistic analysis of debonding process in cemented hip implants. In, 6th International Symposium in Biomechanics & Biomedical Engineering, Madrid, Spain, 25 - 28 Aug 2004. , 1-6.

Bahaj, A. S., James, P. A. B. and McBride, J.W. (2004) Predicting photovoltaic connector lifetime. In, Proceedings of 3rd World Conference on Photovoltaic Energy Conversion. 3rd World Conference on Photovoltaic Energy Conversion (WPEC3), 12-16 May 2003, Osaka, Japan, Piscataway, United Staes, Institute of Electrical and Electronics Engineers , 2833-2836. (doi:10.1109/WCPEC.2003.1305175 ).

Baig, M.F. and Chernyshenko, S.I. (2004) Regeneration mechanism of streaks in near-wall quasi-2D turbulence. European Journal Mechanics B/Fluids, 23, (5), 727-736. (doi:10.1016/j.euromechflu.2004.02.004).

Baig, Mirza Faisal Sayeed (2004) Regeneration mechanisms of organized structures in near-wall turbulence. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Balaji, S.K. and Tatnall, A.R.L. (2004) Determination of orbital elements for formation assembly problem. In, Proceedings of the IEEE Aerospace Conference 2004. IEEE Aerospace Conference 2004 Piscataway, USA, Institute of Electrical and Electronics Engineers, 2641-2646. (doi:10.1109/AERO.2004.1368059).

Baramov, L., Tutty, O.R. and Rogers, E. (2004) H-infinity control of nonperiodic two-dimensional channel flow. IEEE Transactions on Control Systems, 12, (1), 111-122. (doi:10.1109/TCST.2003.821951).

Barik, Rakesh, Wharton, Julian A., Wood, Robert J.K. and Stokes, Keith R. (2004) The environment factors affecting the performance of nickel-aluminum bronze (NAB). In, Corrosion 2004 NACE, 1-14.

Batten, W.M.J., Turnock, S.R., Bressloff, N.W. and Abu-Sharkh, S.M. (2004) Turbulent Taylor-Couette vortex flow between large radius ratio concentric cylinders. Experiments in Fluids, 36, (3), 419-421. (doi:10.1007/s00348-003-0739-1).

Bavykin, Dmitry V., Parmon, Valentin N., Lapkin, Alexei A. and Walsh, Frank C. (2004) The effect of hydrothermal conditions on the mesoporous structure of TiO2 nanotubes. Journal of Materials Chemistry, 14, (22), 3370-3377. (doi:10.1039/b406378c).

Bearpark, Keith and Keane, Andy J. (2004) The use of collective memory in genetic programming. In, Jin, Yaochu (ed.) Knowledge Incorporation in Evolutionary Computation. , Springer, 15-36. (Studies in Fuzziness and Soft Computing 167).

Berg, Rolf W. and Kerridge, David H. (2004) The NaNO3-KNO3 system: the postion of the solidus and sub-solidus. Dalton Transactions, 15, 2224-2229. (doi:10.1039/B403260H).

Bhaganagar, K., Kim, J. and Coleman, G. (2004) Effect of roughness on wall-bounded turbulence. Flow, Turbulence and Combustion, 72, 463-492. (doi:10.1023/B:APPL.0000044407.34121.64).

Bilek, J., Atkinson, J. and Wakeham, W. (2004) Design issues of an instrument for measuring thermal conductivity of high temperature fluids. In, 11th Electronic Devices and Systems Conference, Brno, Czech Republic, 09 - 10 Sep 2004. 6pp.

Bilek, J., Atkinson, J. and Wakeham, W. (2004) Thermal conductivity of molten lead free solders. In, 7th Asian Thermophysical Properties Conference, Huangshan, China, Aug 2003. 8pp.

Bilek, Jaromir, Atkinson, John and Wakeham, William (2004) Thermal conductivity of molten lead free solders. In, European Microelectronics and Packaging Symposium, Prague, Czech Republic, 16 - 18 Jun 2004. 6pp.

Bissessuer, R., Chen, X. and Zhang, X. (2004) Numerical investigation of subsonic 2D/3D cavity flows, American Institute of Aeronautics and Astronautics

Boardman, Richard P., Fangohr, Hans, Cox, Simon J., Goncharov, Alexander V., Zhukov, Alexander A. and de Groot, Peter A.J. (2004) Micromagnetic simulation of ferromagnetic part-spherical particles. Journal of Applied Physics, 95, (11), 7037-7039. (doi:10.1063/1.1688639).

Boltryk, P., Hill, M., Keary, A., Phillips, B., Robinson, H. and White, P. (2004) An ultrasonic transducer array for velocity measurement in underwater vehicles. Ultrasonics, 42, (1-9), 473-478. (doi:10.1016/j.ultras.2003.12.036).

Boltryk, P., Hill, M. and White, P.R. (2004) Peak-finding methods for improving the resolution of a sonar-based correlation velocity log. In, Proceedings of the Institute of Acoustics Symposium on Sonar Signal Processing. Institute of Acoustics Symposium on Sonar Signal Processing St. Albans, UK, Instititue of Acoustics, 206-213.

Boltryk, Peter J., Hill, Martyn, Keary, Alison C. and White, Paul R. (2004) Surface-fitting for improving the resolution of peak estimation on a sparsely sampled two-dimensional surface with high levels of variance, for an acoustic velocity log. Measurement Science and Technology, 15, (3), 581-591. (doi:10.1088/0957-0233/15/3/010).

Boltryk, Peter Jan (2004) The development of an acoustic navigational aid for autonomous underwater vehicles. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Boselli, J., Gregson, P.J. and Sinclair, I. (2004) Quantification of particle distribution effects on fatigue in an Al-SiCp composite. Materials Science And Engineering A, 379, (1-2), 72-82. (doi:10.1016/j.msea.2003.11.043).

Bouzo, M. Costa, Grilli, F. and Yang, Y. (2004) Modelling of coupling between superconductors of finite length using an integral formulation. Superconductor Science and Technology, 17, (10), 1103-1112. (doi:10.1088/0953-2048/17/10/003).

Boyd, S.W., Blake, J.I.R., Shenoi, R.A. and Kapadia, A. (2004) Integrity of hybrid steel-to-composite joints for marine application. Proceedings of the Institution of Mechanical Engineers: Part M, Journal of Engineering for the Maritime Environment, 218, (4), 235-246.

Boyd, S.W., Blake, J.I.R., Shenoi, R.A. and Mawella, J. (2004) Fatigue life and residual strength analysis of steel-composite joints. Applied Mechanics and Materials, 1-2, 81-86.

Boyd, S.W., Winkle, I.E. and Day, A.H. (2004) Bonded butt joints in pultruded GRP panels - an experimental study. International Journal of Adhesion and Adhesives, 24, (3), 263-275. (doi:10.1016/j.ijadhadh.2003.11.002).

Bressloff, N.W., Banks, J. and Bhaskar, K.V. (2004) Parametric geometry definition and analysis of the human carotid artery bifurcation. In, IMECE 2004: 2004 ASME International Mechanical Engineering Congress and Exposition, Anaheim, USA, 13 - 19 Nov 2004. Anaheim, USA, American Society of Mechanical Engineers, 1-2.

Bressloff, N.W., Forrester, A.I.J., Banks, J. and Bhaskar, K.V. (2004) Shape optimization of the carotid artery bifurcation. In, 5th ASMO-UK / ISSMO conference on Engineering Design Optimization, Stratford upon Avon, UK, 12 - 13 Jul 2004. UK,

Bressloff, Neil W., Banks, Jim and Bhaskar, K. Vijaya (2004) Parametric geometry modeling of the carotid artery bifurcation: the need for new flow metrics. In, International Workshop on Flow and Motion, Zurich, Switzerland, 11 - 13 Jul 2004. 2pp, 1-2.

Browne, M., Roques, A., Rooke, A. and Taylor, A. (2004) On the relationship between strains generated during bone cement polymerisation and the relief mechanisms observed using acoustic emission. In, 7th World Biomaterials Congress, Sydney, Australia, 17 - 21 May 2004. , 1453.

Bru, Christophe, Scanlan, James and Hale, Peter (2004) Visualisation of cost information. International Journal of Agile Manufacturing, 7, (1), 53-59.

Bura, R.O., Yao, Y.F., Sandham, N.D. and Roberts, G.T. (2004) Investigation of hypersonic shock-wave/boundary layer interactions. In, Jiang, Zonglin and Han, Z-Y. (eds.) Shock Waves: Proceedings of the 24th International Symposium on Shock Waves. 24th International Symposium on Shock Waves China, Tsinghua University Press/Springer.

Bura, Romie Oktovianus (2004) Laminar/transitional shock-wave/boundary-layer interactions (SWBLIs) in hypersonic flows. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 265pp.

Béthoux, Olivier, McBride, John and Maul, Christian (2004) Surface laser scanning on fossil insects. Palaeontology, 47, (1), 13-19. (doi:10.1111/j.0031-0239.2004.00344.x).

Castro, Ian P. and Watson, Lee (2004) Vortex shedding from tapered, triangular plates: taper and aspect ratio effects. Experiments in Fluids, 37, (2), 159-167. (doi:10.1007/s00348-004-0795-1).

Chandraprabha, S. and Molland, A.F. (2004) A numerical prediction of wash wave and wave resistance of high speed displacement ships in deep and shallow water. In, Thailand Conference on Mechanical Engineering 18 - 20 Oct 2006.

Chandraprabha, S., Molland, A.F., Wilson, P.A. and Ghani, P.A. (2004) An experimental investigation into wash wave and resistance of high speed displacement craft in shallow water. In, Thailand Conference on Mechanical Engineering, Kornkan Province, Thailand, 18 - 20 Oct 2004. 7pp, 1-7.

Chen, J., Browne, M., Taylor, M. and Gregson, P.J. (2004) Application of an interface failure model to predict fatigue crack growth in an implanted metallic femoral stem. Computer Methods and Programs in Biomedicine, 73, (3), 249-256. (doi:10.1016/S0169-2607(03)00042-7).

Chen, X.X., Zhang, X., Morfey, C.L. and Nelson, P.A. (2004) A numerical method for computation of sound radiation from an unflanged duct. Journal of Sound and Vibration, 270, (3), 573-586. (doi:10.1016/j.jsv.2003.09.055).

Chen, Zhi-Min and Price, W.G. (2004) Chaotic behaviour of a Galerkin model of a two-dimensional flow. Chaos:An Interdisciplinary Journal of Nonlinear Science, 14, (4), 1056-1068. (doi:10.1063/1.1804091).

Chernyshenko, Sergei I. and Privalov, Aleksei V. (2004) Internal degrees of freedom of an actuator disk model. Journal of Propulsion and Power, 20, (1), 155-163.

Ciavarella, M. and Maitournam, H. (2004) On the Ekberg, Kabo and Andersson calculation of the Dang Van high cycle fatigue limit for rolling contact fatigue. Fatigue and Fracture of Engineering Materials and Structures, 27, (6), 523-528. (doi:10.1111/j.1460-2695.2004.00772.x).

Ciavarella, M., Murolo, G. and Demelio, G. (2004) The electrial/thermal conductance of rough surfaces - the Weierstrass - Archard multiscale model. International Journal of Solids and Structures, 41, (15), 4107-4120. (doi:10.1016/j.ijsolstr.2004.02.048).

Ciavarella, M., Murolo, G., Demelio, G. and Barber, J.R. (2004) Elastic contact stiffness and contact resistance for the Weierstrass profile. Journal of the Mechanics and Physics of Solids, 52, (6), 1247-1265. (doi:1 0.1016/j.jmps.2003.12.002).

Ciavarella, Michele and Meneghetti, Giovanni (2004) On fatigue limit in the presence of notches: classical vs. recent unified formulations. International Journal of Fatigue, 26, (3), 289-298. (doi:10.1016/S0142-1123(03)00106-3).

Coceal, O., Thomas, T.G., Castro, I.P. and Belcher, S.E. (2004) Turbulent flow over groups of urban-like obstacles. In, Flow and transport processes in complex obstructed geometries: from cities and vegetative canopies to industrial problems, Kyiv, Ukraine, 04 - 15 May 2004. , 62-3.

Coceal, Omduth, Dobre, A., Thomas, T.G., Castro, I.P. and Belcher, S.E. (2004) Structure of turbulent flow over groups of buildings. In, Universities Weather Research Network (UWERN) Annual Conference 2004, Salford, UK, 13 - 15 Dec 2004. 10pp.

Coleman, G.N., Hu, Z., Krishnan, L., Li, Q., Sandham, N.D. and Yorke, C.P. (2004) Some recent results from aerodynamics-based DNS. In, Neittaanmaki, P., Rossi, T., Korotov, S., Onate, E., Periaux, J. and Knorzer, D. (eds.) European Congress on Computational Methods in Applied Sciences and Engineering: ECCOMAS 2004. Jyväskylä, Finland, European Congress on Computational Methods in Applied Sciences and Engineering, 1-6.

Coleman, G.N., Johnstone, R. and Ashworth, M. (2004) Reynolds number trends from DNS of the turbulent Ekman layer. In, American Physical Society 57th Annual Meeting of the Division of Fluid Dynamics, Seattle, USA, 21 - 23 Nov 2004. , 44.

Connolley, T., Starink, M.J. and Reed, P.A.S. (2004) Effect of broaching on high-temperature fatigue behavior in notched specimens of INCONEL 718. Metallurgical and Materials Transactions A, 35, (3), 771-783. (doi:10.1007/s11661-004-0005-z).

Cornelussen, R.A., Huussen, T.N., Spreeuw, R.J.C. and Van Linden van den Heuvell, H.B. (2004) Power-efficient frequency switching of a locked laser. Applied Physics B: Lasers and Optics, 78, (1), 19-23. (doi:10.1007/s00340-003-1341-1).

Coton, F.N., Galbraith, R.A.M., Wang, T. and Newman, S.J. (2004) A wind-tunnel based study of helicopter tail rotor blade vortex interaction. The Aeronautical Journal, 108, (1083), 237-244.

Cunningham, S. (2004) Southern Ocean circulation and climate. In, Griffiths, G. and Walton, D.W.H. (eds.) A Century of "Discovery": Antarctic exploration and the Southern Ocean. Abstracts of an International Symposium, Southampton, United Kingdom, 28-30 June 2004. A Century of "Discovery": Antarctic exploration and the Southern Ocean Southampton, UK, Southampton Oceanography Centre, p.31.

Diken, Özgür, Du, Shuang-Xing, Hudson, Dominic A. and Temarel, Pandeli (2004) Calculation of steady-state ship wave patterns using a general Rankine source method. In, The Proceedings of The Fourteenth (2004) International Offshore and Polar Engineering Conference. The Fourteenth International Offshore and Polar Engineering Conference , International Society of Offshore and Polar Engineers, 447-454.

Dixon, F.C., Roberts, G.T. and Tutty, O.R. (2004) Interference effects due to transverse jets in hypersonic flows. In, Jiang, Zonglin (ed.) Shock Waves: Proceedings of the 24th International Symposium on Shock Waves. 24th International Symposium on Shock Waves China, Tsinghua University Press/Springer.

Djidjeli, K., Chinchapatnam, P.P., Nair, P.B. and Price, W.G. (2004) Global and compact meshless schemes for the unsteady convection-diffusion equation. In, International Symposium on Health Care and Biomedical Research Interaction, Oujda, Morroco, 08 - 09 Oct 2004. Morroco,

Dransfeld, S., Tatnall, A.R., Robinson, I.S. and Mobley, C.D. (2004) A comparison of multi-layer perceptron and multilinear regression algorithms for the inversion of synthetic ocean colour spectra. International Journal of Remote Sensing, 25, (21), 4829-4834. (doi:10.1080/01431160412331269661).

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2004) An improved matching method to solve the diffraction—radiation problem of a ship moving in waves. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 218, (3), 139-152. (doi:10.1243/1475090041737930).

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2004) Theoretical predictions of steady-state hydrodynamic characteristics of a high-speed vessel with transom stern. Royal Institution of Naval Architects Transactions A: International Journal of Maritime Engineering, 146, (4), 1-15.

Du, S.X., Hudson, D.A., Price, W.G., Temarel, P., Chen, R.Z. and Wu, Y.S. (2004) The wavelet analysis in ship model test. In, The Joint Workshop of Overseas and Domestic Chinese Young Scholars on the Frontier Problem of Ship Hydrodynamics, Wuxi, China, 2004.

Du, S.X., Hudson, D.A., Price, W.G., Temarel, P., Chen, R.Z. and Wu, Y.S. (2004) Wavelet analysis of extreme wave load experiments with a flexible shipmodel. In, Proceedings 9th international symposium practical design of ships and other floating structures, 1. 9th International Symposium Practical Design of Ships and Other Floating Structures , International Symposium Practical Design of Ships and Other Floating Structures, 301-308.

Dulieu-Barton, J.M., Quinn, S., Eyre, C. and Cunningham, P.R. (2004) Development of a temperature calibration device for thermoelastic stress analysis. Applied Mechanics and Materials, 1-2, 197-204.

Dupplaw, David P., Brunson, David, Vine, Anna-Jane E., Please, Colin P., Lewis, Susan M., Dean, Angela M., Keane, Andy J. and Tindall, Marcus J. (2004) A web-based knowledge elicitation system (GISEL) for planning and assessing group screening experiments for product development. Journal of Computing and Information Science in Engineering, 4, (3), 218-225. (doi:10.1115/1.1778192).

Earl, J.S., Dulieu-Barton, J.M. and Shenoi, R.A. (2004) Thermoelastic stress analysis as a validation tool for FEA of composite tee joint. In, NAFEMS Seminar on FEA Versus Test, Radcliffe-upon-Soar, UK, 03 Nov 2004. , 4 pages.

Earl, J.S. and Shenoi, R.A. (2004) Hygrothermal ageing effects on FRP laminate and structural foam materials. Composites Part A: Applied Science and Manufacturing, 35, (11), 1237-1247. (doi:10.1016/j.compositesa.2004.04.007).

Eaton-Evans, J., Nichol, R., Sathon, N., Brown, I.A., Dulieu-Barton, J.M. and Little, E.G. (2004) The use of thermoelastic stress analysis to provide full field stress anlaysis of self expanding stents. In, 12th International Conference on Experimental Mechanics, Politecnico di Bari, Italy, 29 Aug - 02 Sep 2004. , 750-751.

Eksik, O., Shenoi, R.A., Blake, J.I.R. and Jeong, H.K. (2004) Damage mechanisms of hat-shaped GRP beams. Journal of Reinforced Plastics and Composites, 23, (14), 1497-1514. (doi: 10.1177/0731684404039783).

Enderling, S., Jiang, L., Ross, A.W.S., Bond, S., Hedley, J., Harris, A.J., Burdess, J.S., Cheung, R., Zorman, C.A., Mehregany, M. and Walton, A.J. (2004) MEMS resonator tuning using focused ion beam platinum deposition. In, NSTI Nanotechnology Conference and Trade Show (Nanotech 2004), Boston, USA, 07 - 11 Mar 2004. , 421.

Eres, M.H., Pound, G.E., Keane, A.J. and Cox, S.J. (2004) User deployment of grid toolkits to engineers. In, UK e-Science All Hands Meeting 2004, Nottingham, UK, 31 Aug - 03 Sep 2004. EPSRC, 424-429.

Fadeyev, Vitaliy, Haber, Carl, Radding, Zachary, Maul, Christian, McBride, John and Golden, Mitchell (2004) Audio reconstruction of mechanically recorded sound by digital processing of metrological data. In, Electronic Media Group: AIC Annual Meeting 2004, Portland, USA, 09 - 14 Jun 2004. 9pp.

Fan, Y.T. and Wilson, P.A. (2004) Time domain non linear strip theory for ship motions. Royal Institution of Naval Architects Transactions A: International Journal of Maritime Engineering, 146, (3), 33-47. (doi:10.3940/rina.ijme.2004.a3.3404).

Fangohr, Hans (2004) A comparison of C, Matlab and Python as teaching languages in engineering. In, Bubak, Martin, van Albada, Geert Dick, Sloot, Peter M.A. and Dongarra, Jack J. (eds.) Computational Science - ICCS 2004: 4th International Conference. ICCS 2004: 4th International Conference , Springer, 1210-1217. (Lecture Notes in Computer Science 3039). (doi:10.1007/b98005).

Fedorov, D.V. (2004) Numerical solution of boundary value problems for second-order linear ordinary differential equations with a small parameter multiplying the highest derivative. Doklady Mathematics, 69, 460-464.

Fielding, S., Griffiths, G. and Roe, H.S.J. (2004) The biological validation of ADCP acoustic backscatter through direct comparison with net samples and model predictions based on acoustic-scattering models. ICES Journal of Marine Science, 61, (2), 184-200. (doi:10.1016/j.icesjms.2003.10.011).

Friedrich, J.M., Ponce-de-León, C., Reade, G.W. and Walsh, F.C. (2004) Reticulated vitreous carbon as an electrode material. Journal of Electroanalytical Chemistry, 561, 203-217. (doi:10.1016/j.jelechem.2003.07.019).

Gao, N., Starink, M.J., Xu, C. and Langdon, T.G. (2004) Microstructural evolution in pure aluminium and a 7034 alloy processed by equal channel angular pressing. In, Nie, J.F., Morton, A.J. and Muddle, B.C. (eds.) Proceedings of 9th International Conference on Aluminium Alloys. 9th International Conference on Aluminium Alloys (ICAA9) Melbourne, Australia, Institute of Materials Engineering Australasia, 856-861. (Materials Forum 28).

Garry, J.R.C. and Wright, I.P. (2004) Coring experiments with cryogenic water and carbon dioxide ices: toward planetary surface operations. Planetary and Space Science, 52, (9), 823-831. (doi:10.1016/j.pss.2004.03.003).

Gittins, G.L., Swinerd, G.G., Lewis, H.G. and Williams, D.N. (2004) A study of debris impact collision probabilities to space tethers. Advances in Space Research, 34, (5), 1080-1084. (doi:10.1016/j.asr.2003.01.013).

Golden, Frank (2004) Many are cold but few are frozen: marine safety issues from a medical sciences perspective. Southampton, UK, University of Southampton, 17pp. (Ship Science Reports, (137) ).

Gratton, Guy and Newman, Simon (2004) The tumble mode - where test pilots fear to tread. Cockpit, 6-22.

Gregory, Jeremy R. and Spearing, S. Mark (2004) A fiber bridging model for fatigue delamination in composite materials. Acta Materialia, 52, (19), 5493-502. (doi: 10.1016/j.actamat.2004.08.009).

Griffiths, G., Jamieson, J., Mitchell, S. and Rutherford, K. (2004) Energy storage for long endurance AUVs. In, Advances in Technology for Underwater Vehicles, Conference Proceedings, 16-17 March 2004. Advances in Technology for Underwater Vehicles London, UK, The Institute of Marine Engineering, Science and Technology, 8-16.

Griffiths, Gwyn (2004) Science directions: AUVs in ocean research and monitoring. International Ocean Systems, 8, (1), 6-9.

Gupta, S., New, A.M.R. and Taylor, M. (2004) Adaptive bone remodelling around a cemented resurfaced femoral head. In, 6th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Madrid, Spain, 2004.

Harris, N., Hill, M., Shen, Y., Townsend, R.J., Beeby, S. and White, N. (2004) A dual frequency, ultrasonic, microengineered particle manipulator. Ultrasonics, 42, (1-9), 139-144. (doi:10.1016/j.ultras.2004.01.056).

Harris, N.R., Hill, M., White, N.M. and Beeby, S.P. (2004) Acoustic power output measurements for thick-film PZT transducers. Electronics Letters, 40, (10), 636-637. (doi:10.1049/el:20040428).

Harris, N.R., Torah, R.N., White, N. M., Hill, M. and Beeby, S.P. (2004) A PZT multilayer actuator for ultrasonic applications. In, The 15th Micromechanics Europe Workshop, Leuven, Belgium, 05 - 07 Sep 2004. 4pp, 17-20.

Harvey, T., Wood, R., Powrie, H. and Warrens, C. (2004) Charging ability of pure hydrocarbons and lubricating oils. Tribology Transactions, 47, (2), 263-71. (doi:10.1080/05698190490439184).

Hazza, Ahmed, Pletcher, Derek and Wills, Richard (2004) A novel flow battery: a lead acid battery based on an electrolyte with soluble lead(II). Part 1. Preliminary studies. Physical Chemistry Chemical Physics, 6, (8), 1773-1778. (doi:10.1039/b401115e).

Heo, D.N., Kim, J.W. and Lee, D.J. (2004) Numerical study on mode transition of an open cavity with lids. Computational Fluid Dynamics Journal, 13, (1), 34-45.

Hetsch, T. and Rist, U. (2004) Interaction of separation and transition in laminar separation bubbles in a 3D boundary layer. In, Research and Technology Organisation (RTO) Specialists Meeting on Enhancememnt of NATO Military Flight Vehicle Performance by Management of Interacting Boundary Layer Transition and Separation, Prague, Czech Republic, 04 - 08 Oct 2004.

Hetsch, Tilman and Rist, Ulrich (2004) On the structure and stability of three-dimensional laminar separation bubbles on a swept plate. In, Breitsamter, C., Laschka, B., Heinemann, H.-J. and Hilbig, R. (eds.) New Results in Numerical and Experimental Fluid Mechanics IV: Contributions to the 13th STAB/DGLR Symposium Munich, Germany 2002. 13th STAB/DGLR (German Aerospace Aerodynamics Association) Symposium Munich, Germany, Springer, 302-310.

Hill, M., Hawkes, J.J., Harris, N.R. and McDonnell, M.B. (2004) Resonant ultrasonic particle manipulators and their applications in sensor systems. In, Proceedings of IEEE: Sensors, 2004. IEEE Sensors 2004, The 3rd IEEE Conference on Sensors , IEEE, 794-797. (doi:10.1109/ICSENS.2004.1426288).

Hill, M., Townsend, R.J., Harris, N.R. and White, N.M. (2004) Microfabricated acoustic resonators for manipulating particles within a fluid. Proceedings of the Institute of Acoustics, 26, (2), 442-451.

Hill, Martyn (2004) Ultrasonic resonators for particle manipulation. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Holden, Carren M.E. and Keane, Andy J. (2004) Visualization methodologies in aircraft design. In, Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference Reston, USA, American Institute of Aeronautics and Astronautics, 1-13.

Hopkins, A.R., Hansen, U.N., Amis, A.A., Knight, M.M. and Taylor, M. (2004) Wear potential in the artificial shoulder and its relation to congruency: a finite element investigation. At 14th European Society of Biomechanics Conference (ESB 2004), Hertogenbosch, Netherlands, 04 - 07 Jul 2004.

Hopkins, Andrew R., Hansen, Ulrich N., Amis, Andrew A. and Emery, Roger (2004) The effects of glenoid component alignment variations on cement mantle stresses in total shoulder arthroplasty. Journal of Shoulder and Elbow Surgery, 13, (6), 668-675. (doi:10.1016/j.jse.2004.04.008).

Hussein, R., Sheppard, J., Palissery, V., Browne, M. and Taylor, M. (2004) The effect of tapered pegs on tibial tray subsidence in closed cell foam. Journal of Bone and Joint Surgery - British Volume, Orthopaedic Proceedings, 86 B, (Supplement III), 252.

Jarry, E., Kapadia, A., Shenoi, R.A. and Miao, S.H. (2004) Design and fabrication of an adhesively bonded aluminium superstructure. In, Proceedings of the 9th International Symposium on Practical Design of Ships and other Floating Structures, PRADS 2004. 9th International Symposium onPractical Design of Ships and other Floating Structures, PRADS 2004 , PRADS, 982-987.

Jeffers, J.R.T., New, A.M.R. and Taylor, M. (2004) Can the initial conditions predict the long term survival of the cement mantle in total hip arthroplasty. Transactions of the Annual Meeting - Orthopaedic Research Society, 29

Jeffers, J.R.T., Roques, A., Browne, M. and Taylor, M. (2004) Damage accumulation in bone cement measured by acoustic emissions. At 14th European Society of Biomechanics Conference (ESB 2004), Hertogenbosch, Netherlands, 04 - 07 Jul 2004.

Jiang, Liudi and Cheung, R. (2004) Impact of Ar addition to inductively coupled plasma etching of SiC in SF6/O2. Microelectronic Engineering, 73-74, 306-311. (doi:10.1016/j.mee.2004.02.058).

Jiang, Liudi, Plank, N.O.V., Blaw, M.A., Cheung, R. and van der Drift, E. (2004) Dry etching of SiC in inductively coupled Cl2/Ar plasma. Journal of Physics D: Applied Physics, 37, (13), 1809-1814. (doi:10.1088/0022-3727/37/13/012).

Jiang, X., Avital, E. and Luo, K.H. (2004) Direct computation and aeroacoustic modelling of a subsonic axisymmetric jet. Journal of Sound and Vibration, 270, (3), 525-538. (doi:10.1016/j.jsv.2003.09.045).

Jiang, X., Avital, E.J. and Luo, K.H. (2004) Sound generation by vortex pairing in subsonic axisymmetric jets. AIAA Journal, 42, (2), 241-248.

Jiao, Zhuoan, Wason, Jasmin, Song, Wenbing, Xu, Fenglian, Eres, M.H., Keane, Andy J. and Cox, Simon J. (2004) Databases, workflows and the grid in a service oriented environment. In, Danelutto, Marco, Vanneschi, Marco and Laforenza, Domenico (eds.) Euro-Par 2004 Parallel Processing: 10th International Euro-Par Conference, Pisa, Italy, August 31- September 3, 2004. Proceedings. Euro-Par 2004 Parallel Processing: 10th International Euro-Par Conference , Springer, 972-979. (Lecture Notes in Computer Science 3149). (doi:10.1007/b99409).

Joyce, M.R., Lee, K.K., Syngellakis, S. and Reed, P.A.S. (2004) Quantitative assessment of preferential fatigue initiation sites in a multi-phase aluminium alloy. Fatigue and Fracture of Engineering Materials and Structures, 27, (11), 1025-1036. (doi:doi: 10.1111/j.1460-2695.2004.00815.x).

Joyce, M.R. and Reed, P.A.S. (2004) Fatigue crack growth behaviour under mixed mode loading in Udimet 720 SX. In, Green, Kenneth A., Pollock, Tresa M., Harada, Hiroshi, Howson, Timothy E., Reed, Roger C., Schirra, John J. and Walston, Scott (eds.) Superalloys 2004. 10th International Symposium on Superalloys , Minerals, Metals & Materials Society, 295-304.

Joyce, M.R., Syngellakis, S. and Reed, P.A.S. (2004) Fatigue crack initiation and early growth in a multiphase Al alloy included in a multilayer material system. Materials Science and Technology, 20, (1), 47-56. (doi:10.1179/026708304225010389).

Joyce, M.R., Wu, X. and Reed, P.A.S. (2004) The effect of environment and orientation on fatigue crack growth behaviour of CMSX-4 nickel base single crystal at 650 °C. Materials Letters, 58, (1-2), 99-103. (doi:10.1016/S0167-577X(03)00423-3).

Kamp, N., Parry, M.R., Singh, K.D. and Sinclair, I. (2004) Analytical and finite element modelling of roughness induced crack closure. Acta Materialia, 52, (2), 343-353. (doi:10.1016/j.actamat.2003.09.019).

Kamp, N., Starink, M.J., Sinclair, I., Gao, N., Gregson, P.J., Pitcher, P.D. and Gardiner, S. (2004) Development of Al-Cu-Mg-Li (Mn,Zr,Sc) alloys for age-forming. Materials Forum, 28, 369-375.

Keane, A.J. (2004) Design search and optimisation using radial basis functions with regression capabilities. In, Parmee, I.C. (ed.) Adaptive computing in design and manufacture VI. , Springer, 39-49.

Kear, G., Barker, B.D., Stokes, K. and Walsh, F.C. (2004) Electrochemical corrosion behaviour of 90-10 Cu-Ni alloy in chloride-based electolytes. Journal of Applied Electrochemistry, 34, (7), 659-669. (doi:10.1023/B:JACH.0000031164.32520.58).

Kear, G., Barker, B.D., Stokes, K. and Walsh, F.C. (2004) Flow influenced electrochemical corrosion of nickel aluminium bronze – Part I. Cathodic polarisation. Journal of Applied Electrochemistry, 34, (12), 1235-1240. (doi: 10.1007/s10800-004-1758-1).

Kear, G., Barker, B.D., Stokes, K. and Walsh, F.C. (2004) Flow influenced electrochemical corrosion of nickel aluminium bronze – Part II. Anodic polarisation and derivation of the mixed potential. Journal of Applied Electrochemistry, 34, (12), 1241-1248. (doi: 10.1007/s10800-004-1759-0).

Kear, G., Barker, B.D. and Walsh, F.C. (2004) Electrochemical corrosion of unalloyed copper in chloride media––a critical review. Corrosion Science, 46, (1), 109-135. (doi:10.1016/S0010-938X(02)00257-3).

Kear, G., Barker, B.D. and Walsh, F.C. (2004) Electrochemical study of UNS S32550 super duplex stainless steel corrosion in turbulent seawater using the rotating cylinder electrode. Corrosion, 60, (6), 561-572.

Kecsmar, J. and Shenoi, R.A. (2004) Some notes on the influence of manufacturing on the fatigue life of welded aluminum marine structures. Journal of Ship Production, 20, (3), 164-175.

Kerswell, R.R., Tutty, O.R. and Drazin, P.G. (2004) Steady nonlinear waves in diverging channel flow. Journal of Fluid Mechanics, 501, 231-250. (doi:10.1017/S0022112003007572).

Kessler, S.S. and Spearing, S.M. (2004) Selection of materials and sensors for health monitoring of composite structures. In, Materials Research Society Fall Meeting 01 Dec 2003. , 365-375.

Kessler, Seth S., Spearing, S.Mark and Dunn, Christopher T. (2004) Packaging of structural health monitoring components. In, Liu, Shih-Chi (ed.) Smart Structures and Materials 2004: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems. Bellingham, USA, International Society for Optical Engineering, 219-229. (Proceedings of SPIE, 5391). (doi:10.1117/12.538843).

Khor, K.H., Buffiére, J-Y., Ludwig, W., Toda, H., Ubhi, H.S., Gregson, P.J. and Sinclair, I. (2004) In situ high resolution synchrotron x-ray tomography of fatigue crack closure micromechanisms. Journal of Physics: Condensed Matter, 16, S3511-S3515. (doi:10.1088/0953-8984/16/33/012).

Kim, J.W. and Lee, D.J. (2004) Generalized characteristic boundary conditions for computational aeroacoustics, part 2. AIAA Journal, 42, (1), 47-55.

Krishnan, L. and Sandham, N.D. (2004) Turbulent spot/separation bubble interactions in a spatially evolving supersonic boundary-layer flow. In, The RTO AVT Specialists’ Meeting on “Enhancement of NATO Military Flight Vehicle Performance by Management of Interacting Boundary Layer Transition and Separation”, Prague, Czech Republic, 04 - 07 Oct 2004. 15pp, 1-15.

Krishnan, L.N.D. (2004) Large eddy simulation of compressible turbulent spots. In, Andersson, H.I. and Krogstad, P.-A. (eds.) Advances in Turbulence X. 10th Euromech European Turbulence Conference Barcelona, Spain, International Center for Numerical Methods in Engineering, 467-471.

Kuiper, J.H., Prathapkumar, K., New, A.M.R. and Richardson, J.B. (2004) Fixation strength of a new type of acetabular cup with improved cement pressure distribution during implantation. Journal of Bone and Joint Surgery - British Volume, Orthopaedic Proceedings, 88 B, (Supplement III), 383.

Labbé, D.F.L., Wilson, P.A., Weiss, P. and Lapierre, L. (2004) Freesub: Navigation Guidance and Control of an IAUV. Royal Institution of Naval Architects Transactions A: International Journal of Maritime Engineering, 146, (2), 71-9. (doi:10.3940/rina.ijme.2004.a2.3504).

Lafronza, L., McAlpine, A., Keane, A.J. and Astley, R.J. (2004) Computer-aided liner optimization for broadband noise. At 10th AIAA/CEAS Aeroacoustics Conference, Manchester, UK, 10 - 12 May 2004. American Institute of Aeronautics and Astronautics11pp.

Lai, H. and Luo, K.H. (2004) Direct numerical simulation of three-dimensional compressible flows in an open cavity. In, Zhuang, F. and Li, J. (eds.) Recent Advances in Fluid Mechanics. Beijing, China, Tsinghua University Press, 790-793.

Lam, L., Bilek, J. and Atkinson, J.K. (2004) Heat distribution analysis of a thick film transcutaneous gas sensor. In, WSEAS/IASME International Conferences on Heat and Mass Transfer, Greece,

Lam, L., Maul, C. and McBride, J. (2004) Temperature, humidity and pressure measurement on automotive connectors. In, Electrical Contacts, 2004. Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts. 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts USA, Institute of Electrical and Electronics Engineers, 297-303. (doi:10.1109/HOLM.2004.1353133).

Lam, L., Swingler, J. and McBride, J. (2004) The contact resistance force relationship of an intrinsically conducting polymer interface. In, Electrical Contacts, 2004. Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts. 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts USA, Institute of Electrical and Electronics Engineers, 304-311. (doi:10.1109/HOLM.2004.1353134).

Leary, Stephen J., Bhaskar, Atul and Keane, Andrew J. (2004) Global approximation and optimization using adjoint computational fluid dynamics codes. AIAA Journal, 42, (3), 631-41.

Leary, Stephen J., Bhaskar, Atul and Keane, Andy J. (2004) A derivative based surrogate model for approximating and optimizing the output of an expensive computer simulation. Journal of Global Optimization, 30, (1), 39-58. (doi: 10.1023/B:JOGO.0000049094.73665.7e).

Lee, D.J., Heo, D.N., Lee, I.C. and Kim, J.W. (2004) CAA application for feedback mechanism in cavity and jet. In, 18th International Congress on Acoustics, Kyoto, Japan, 04 - 09 Apr 2004.

Lee, D.J., Kim, J.W. and Lee, I.C. (2004) Visualisation of aerodynamic noise using computational aeroacoustics. Journal of Visualization, 2, (2), 3-7.

Lee, I.C., Kim, J.W. and Lee, D.J. (2004) An analysis of screech tone noise and its mode change of an axisymmetric supersonic jet using optimised compact schemes. In, 10th AIAA/CEAS Aeroacoustics Conference, Manchester, UK, 10 - 12 May 2004. Reston, US, American Institute of Aeronautics and Astronautics, 2952.

Lewis, H.G., Swinerd, G.G. and Channer, S.E. (2004) Collision risk analysis for spaceborne interferometric SAR systems. In, Bendisch, Joerg (ed.) Space Debris and Space Traffic Management 2004. International Academy of Astronautics Symposium held in conjunction with 55th International Astronautical Congress , American Astronautical Society, 371-384. (Science and Technology Series 110).

Lewis, H.G., Swinerd, G.G., Martin, C.E. and Campbell, W.S. (2004) The stability of disposal orbits at super-synchronous altitudes. Acta Astronautica, 55, (3-9), 299-310. (doi:10.1016/j.actaastro.2004.05.022).

Li, H.Q., Roberts, D.C., Steyn, J.L., Turner, K.T., Yaglioglu, O., Hagood, N.W., Spearing, S.M. and Schmidt, M.A. (2004) Fabrication of a microvalve with piezoelectric actuation. Sensors and Actuators A: Physical, 111, (1), 51-6. (doi: 10.1016/j.sna.2003.10.013).

Lim, Hee-Chang and Lee, Sang-Joon (2004) Flow control of a circular cylinder with O-rings. Fluid Dynamics Research, 35, (2), 107-122. (doi:10.1016/j.fluiddyn.2004.05.001).

Limbert, G., Taylor, M. and Middleton, J. (2004) Three-dimensional finite element modelling of the human ACL: simulation of passive knee flexion with a stressed and stress-free ACL. Journal of Biomechanics, 37, (11), 1723-1731. (doi:10.1016/j.jbiomech.2004.01.030).

Limbert, Georges, Middleton, John and Taylor, Mark (2004) Finite element analysis of the human ACL subjected to passive anterior tibial loads. Computational Methods in Biomechanics and Biomedical Engineering, 7, (1), 1-8. (doi:10.1080/10255840410001658839).

Luo, J.K., Flewitt, A.J., Spearing, S.M., Fleck, N.A. and Milne, W.I. (2004) Modelling and fabrication of microspring thermal actuator. In, Nanotech 2004 Vol.1: Technical Proceedings of the 2004 NSTI Nanotechnology Conference and Trade Show. NSTI Nanotechnology Conference and Trade Show Danville, USA, Nano Science and Technology Institute, 355-358.

Luo, J.K., Flewitt, A.J., Spearing, S.M., Fleck, N.A. and Milne, W.I. (2004) Normally closed microgrippers using a highly stressed diamond-like carbon and Ni bimorph structure. Applied Physics Letters, 85, (23), 5748-50. (doi: 10.1063/1.1833555).

Luo, J.K., Flewitt, A.J., Spearing, S.M., Fleck, N.A. and Milne, W.I. (2004) Young's modulus of electroplated Ni thin film for MEMS applications. Materials Letters, 58, (17-18), 2306-2309. (doi: 10.1016/j.matlet.2004.02.044).

Luo, J.K., He, J.H., Flewitt, A.J., Spearing, S.M., Fleck, N.A. and Milne, W.I. (2004) Bimorph structure microgripper using diamond like carbon and metal. In, 5th international conference on Advanced Semiconductor Devices and Microsystems, Smolenice, Slovakia, 17 - 21 Oct 2004.

Luo, JiKui, He, Johnny H., Flewitt, Andrew J., Moore, David F., Spearing, S.Mark, Fleck, Norman A. and Milne, Williams I. (2004) Development of an all metal electrothermal actuator and its applications. In, Janson, Siegfried W. and Henning, Albert K. (eds.) MEMS/MOEMS Components and Their Applications. Bellingham, USA, International Society for Optical Engineering (SPIE), 201-210. (Proceedings of SPIE 5344). (doi:10.1117/12.524098).

Luo, K.H. (2004) Enhancement of mixing and combustion in buoyant non-circular plumes. In, Friedrich, Rainer, Geurts, B.J. and Métais, Olivier (eds.) Direct and large-eddy simulation V: proceedings of the fifth international ERCOFTAC workshop on direct and large-eddy simulation. Fifth international ERCOFTAC workshop on direct and large-eddy simulation , Springer, 375-384. (ERCOFTAC Series 9).

Luo, K.H. (2004) Fluid dynamics effects on lifted flames. In, Zhuang, F. and Li, J. (eds.) Recent Advances in Fluid Mechanics. 4th International Conference on Fluid Mechanics Beijing, China, Tsinghua University Press & Springer, 381-385.

Luo, K.H. (2004) Instabilities, entrainment and mixing in buoyant reacting jets. European Journal of Mechanics B / Fluids, 23, (3), 443-460. (doi:10.1016/j.euromechflu.2003.10.008).

Luo, K.H. (2004) New opportunities and challenges in fire dynamics modelling. In, Bradley, D., Drysdale, D. and Molkov, V. (eds.) Proceedings of the 4th International Seminar on Fire and Explosion Hazards. 4th International Seminar on Fire and Explosion Hazards Nothern Ireland, Universities Press, 39-52.

Luo, K.H. (2004) A study of mixing enhancement in rectangular reacting plumes by direct numerical simulation. In, Jiachun, Li and Zhuang, Fenggan (eds.) Recent Advances in Fluid Mechanics. , Tsinghua University Press, 140-3.

MacArthur, B.D., Please, C.P., Taylor, M. and Oreffo, R.O.C. (2004) Mathematical modelling of skeletal repair. Biochemical and Biophysical Research Communications, 313, (4), 825-833. (doi:10.1016/j.bbrc.2003.11.171).

Mahon, S., Zhang, X. and Gage, C. (2004) The evolution of edge vortices underneath a diffuser equipped bluff body. In, 12th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 12 - 15 Jul 2004. , 1-10.

Maina, Edward Ikinya (2004) The development of passive flow control vortices. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Markvart, T. (2004) Thermodynamics of photovoltaic energy conversion. In, International Workshop on Teaching in Photovoltaics ’04, Prague, Czech Republic, 22 - 23 Apr 2004. , 65-68.

Markvart, T. and Greef, R. (2004) Polaron-exciton model for resonance energy transfer. Journal of Chemical Physics, 121, (13), 6401-6405. (doi:10.1063/1.1786575).

Markvart, T. and Landsberg, P.T. (2004) Open circuit voltage enhancement in ideal thin solar cells. In, 19th European Photovoltaic Solar Energy Conference, Paris, France, 07 - 11 Jun 2004. , 206-207.

McBride, J.W., Hill, M. and Zhang, D. (2004) A feature extraction method for the assessment of the form parameters of surfaces with localised erosion. Wear, 256, (3-4), 243-251. (doi:10.1016/S0043-1648(03)00411-3).

McBride, J.W., Sumption, A.P. and Swingler, J. (2004) On the evaluation of low level contact erosion. In, Electrical Contacts, 2004. Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts. 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts USA, Institute of Electrical and Electronics Engineers, 370-377. (doi:10.1109/HOLM.2004.1353143).

McBride, J.W., Sun, W. and Maul, C. (2004) The 3D measurement and analysis of aspheric surfaces. In, 4th International Conference of the European Society for Precision Engineering and Nanotechnology, 2004. 4th International Conference of the European Society for Precision Engineering and Nanotechnology UK, LG Digital, 364-365. (2235).

McBride, John and Maul, Christian (2004) The 3D measurement and analysis of high precision surfaces using con-focal optical methods. IEICE Transactions on Electronics, E87-C, (8), 1261-1267.

Mehrez, L., Bah, M.T. and Browne, M. (2004) Reliability analysis: a new approach to assess the performance of a cemented total hip replacement. In, Proceedings of the 7th Engineering Structural Integrity Assessment. 7th International Conference on Engineering Structural Integrity Assessment (ESIA7) , EMAS, 143-150.

Mehrez, L., Bah, M.T. and Browne, M. (2004) Reliability and sensitivity analyses of two simplified THR models. In, 14th European Orthopaedic Research Society (EORS) Meeting, Amsterdam, The Netherlands, 25 - 27 Nov 2004. 1pp.

Moat, B.I., Molland, A.F. and Yelland, M.J. (2004) A wind tunnel study of the mean airflow around a simple representation of a merchant ship. Southampton, UK, Southampton Oceanography Centre, 21pp. (Southampton Oceanography Centre Research and Consultancy Report, (87) ).

Moat, B.I., Yelland, M.J. and Molland, A.F. (2004) Possible biases in wind speed measurements from merchant ships. In, 5th International Colloquium on Bluff Body Aerodynamics and Applications, Ottawa, Canada, 11 - 15 Jul 2004. Ottawa, Canada, National Research Council Canada, Aerodynamics Laboratory4pp, 537-540.

Modha, Ajay Narendra (2004) A fundamental study into main rotor design with the aim of improving the conventional helicopter's stability and control properties. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 253pp.

Mohammad, Mohammad T.N. (2004) Testing and analysis of axial gap permanent magnet DC motors. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Molinari, M., Thomas, K.S. and Cox, S.J. (2004) Electromagnetic design search and optimisation of photonic bandgap devices on distributed computational resources. In, Proceedings of the Fifth IEE International Conference on Computation in Electromagnetics. Fifth IEE Conference on Computation in Electromagnetics (CEM 2004) London, UK, The Institution of Engineering and Technology, 103-104. (doi:10.1049/cp:20040465).

Molinari, Marc, Kammuni, Kushan and Cox, Simon J. (2004) Integration of chargeable web services into engineering applications. In, Proceedings of the Third e-Science All-Hands Meeting. Third UK e-Science All Hands Conference UK, Engineering and Physical Sciences Research Council (EPSRC), 438-442.

Molland, A.F., Bahaj, A.S., Chaplin, J.R. and Batten, W.M.J. (2004) Measurements and predictions of forces, pressures and cavitation on 2-D sections suitable for marine current turbines. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 218, (2), 127-138. (doi:10.1243/1475090041651412).

Molland, A.F., Wilson, P.A., Taunton, D.J., Chandraprabha, S. and Ghani, P.A. (2004) Resistance and wash measurements on a series of high speed displacement monohull and catamaran forms in shallow water. Royal Institution of Naval Architects Transactions A: International Journal of Maritime Engineering, 146, (2), 19-38. (doi:10.3940/rina.ijme.2004.a2.3604).

Moon, Hyung-Soo, Choi, Dongwon and Spearing, S.M. (2004) Development of Si-SiC hybrid structures for elevated temperature micro-turbomachinery. Journal of Microelectromechanical Systems, 13, (4), 676-87. (doi: 10.1109/JMEMS.2004.832182).

Musker, Antony, Roberts, Graham, Chandler, Paul, Grayson, John and Holdsworth, Joseph (2004) Optimisation study of a homogeneously-catalysed HTP rocket engine. In, Wilson, A. (ed.) Proceedings of the 2nd International Conference on Green Propellants for Space Propulsion. 2nd International Conference on Green Propellants for Space Propulsion (ESA SP-557) , ESA. (European Space Agency Special Publication 557). (2004gpsp.confE...9M).

Mwanza, M.C., Ali, M.S., Syngellakis, S., Perrin, C. and Reed, P.A.S. (2004) Fatigue evaluation of novel HVOF spray coated Al-based plain bearing alloys. In, 9th International Conference on Aluminium Alloys (ICAA9), Brisbane, Australia, 02 - 04 Aug 2004.

Nair, P.B. (2004) Stochastic meshfree projection scheme for flow in random porous media. In, ICFD Conference on Numerical Methods for Fluid Dynamics, Oxford, UK, 29 Mar - 01 Apr 2004.

Nair, Prasanth B. (2004) Projection schemes in stochastic finite element analysis. In, Nikolaidis, Efstratios, Ghiocel, Dan M. and Singhal, Suren (eds.) Engineering design reliability handbook. , CRC Press.

Narasimhan, S., Shenoi, R.A. and Jeong, H.K. (2004) Three dimensional stresses in adhesively bonded lap joints with non-identical adherends. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, (L4), 283-298. (doi:10.1243/1464420042722282).

Nayak, A.K., Shenoi, R.A. and Moy, S.S.J. (2004) Transient response of composite sandwich plates. Composite Structures, 64, (3-4), 249-267. (doi:10.1016/S0263-8223(03)00135-1).

New, A.M., Jeffers, J.R.T. and Taylor, M. (2004) Damage accumulation in the cement mantle surrounding three hip prostheses. Transactions of the Annual Meeting - Orthopaedic Research Society, 29

Newman, S. (2004) The safety of shipborne helicopter operation. Measurement & Control, 37, (2), 44-52.

Newman, S., Brown, R., Perry, J., Khelifa, M., Modha, A. and Arlin, G. (2004) Revisiting the effects of blade geometry on rotor behaviour in descending flight. In, 30th European Rotorcraft Forum, Marseilles, Sep 2004.

Newman, Simon (2004) The safety of shipborne helicopter operation. Aircraft Engineering and Aerospace Technology, 76, (5), 487-501. (doi:10.1108/00022660410555167).

O'Dea, Enda (2004) Robust control of non-linear 2D and linear 3D disturbances in channel flow by surface transpiration. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Okazaki, Teiko, Ueno, Takasi, Furuya, Yasubumi, Spearing, Mark and Hagood, N.W. (2004) Detectability of stress-induced martensite phase in ferromagnetic shape memory alloy Fe-30.2at.%Pd by Barkhausen noise method. Acta Materialia, 52, (17), 5169-75. (doi: 10.1016/j.actamat.2004.07.026).

Ong, Yew Soon and Keane, A.J. (2004) Meta-lamarckian learning in memetic algorithms. IEEE Transactions on Evolutionary Computation, 8, (2), 99-110. (doi:10.1109/TEVC.2003.819944).

Ong, Yew Soon, Nair, P.B., Keane, A.J. and Wong, K.W. (2004) Surrogate-assisted evolutionary optimization frameworks for high-fidelity engineering design problems. In, Jin, Yaochu (ed.) Knowledge Incorporation in Evolutionary Computation. , Springer, 307-332. (Studies in Fuzziness and Soft Computing 167).

Paine, M.D., Gabriel, S., Schabmueller, C.G.J. and Evans, A.G.R. (2004) Realisation of very high voltage electrode-nozzle systems for MEMS. Sensors and Actuators A: Physical, 114, (1), 112-117. (doi:10.1016/j.sna.2004.02.013).

Palissery, V., Taylor, M. and Browne, M. (2004) Fatigue characterization of a polymer foam to use as a cancellous bone analog material in the assessment of orthopaedic devices. Journal of Materials Science: Materials in Medicine, 15, (1), 61-67. (doi: 10.1023/B:JMSM.0000010098.65572.3b).

Parsch, Dominic, Diehm, Caroline, New, Andrew M.R., Schneider, Sven and Breusch, Steffen J. (2004) A new bleeding model of the human acetabulum and a pilot comparison of 2 different cement pressurizers. Journal of Arthroplasty, 19, (3), 381-386. (doi:10.1016/j.arth.2003.09.014).

Parsch, Dominik, Diehm, Caroline, Schneider, Sven, New, Andrew and Breusch, Steffen (2004) Acetabular cementing technique in THA--flanged versus unflanged cups, cadaver experiments. Acta Orthopaedica Scandinavica, 75, (4), 269-275. (doi: 10.1080/00016470410001196).

Pashias, C. and Turnock, S.R. (2004) Accurate capture of lifting surface tip vortex and wake. In, 2004 UK ANSYS Conference, Stratford-upon-Avon, UK, 15 - 16 Nov 2004.

Pattenden, R.J., Turnock, S.R. and Bressloff, N.W. (2004) The use of detached eddy simulation in ship hydrodynamics. In, 25th Symposium on Naval Hydrodynamics, St. Johns, Canada, , 1-19.

Peles, Y., Srikar, V.T., Harrison, T.S., Mracek, A. and Spearing, S.M. (2004) Fluidic packaging of microengine and microrocket devices for high pressure and high temperature operation. Journal of Microelectromechanical Systems, 13, (1), 31-40. (doi: 10.1109/JMEMS.2003.823223).

Perillo-Marcone, A., Ryd, L., Johnsson, K. and Taylor, M. (2004) A combined RSA and FE study of the implanted proximal tibia: correlation of the post-operative mechanical environment with implant migration. Journal of Biomechanics, 37, (8), 1205-1213. (doi:10.1016/j.jbiomech.2003.12.004).

Perillo-Marcone, A. and Taylor, M. (2004) Examination of tibial bone stresses using explicit finite element analysis. In, 6th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Madrid, Spain, 25 - 28 Feb 2004.

Perrin, C., Harris, S., McCartney, D.G., Syngellakis, S. and Reed, P.A.S. (2004) The potential of new processing routes in Al-based plain journal bearings. In, 9th International Conference on Aluminium Alloys (ICAA9), Brisbane, Australia, 02 - 05 Aug 2004.

Phan, T.S. and Temarel, P. (2004) Antisymmetric behaviour of pontoon and semi-submersible types of very large floating structure in regular oblique waves. In, Chung, Jin S., Izumiyama, Koh, Sayed, Mohamed and Won Hong, Seok (eds.) The Proceedings of The Fourteenth (2004) International Offshore and Polar Engineering Conference. Proceedings of the Fourtheenth International Offshore and Polar Engineering Conference California, USA, International Society of Offshore and Polar Engineers (ISOPE), 576-583.

Pletcher, Derek and Wills, Richard (2004) A novel flow battery: A lead acid battery based on an electrolyte with soluble lead(II). Part II. Flow cell studies. Physical Chemistry Chemical Physics, 6, (8), 1779-1785. (doi:10.1039/b401116c).

Pongvuthithum, R., Veres, S.M., Gabriel, S.B. and Rogers, E. (2004) Universal adaptive output tracking of double integrators. In, Conference , 279-305.

Ponter, A.R.S., Afferante, L. and Ciavarella, M. (2004) A note on Merwin's measurements of forward flow in rolling contact. Wear, 256, (3-4), 321-328. (doi:10.1016/S0043-1648(03)00407-1).

Pound, G.E., Eres, M.H., Cox, S.J., Wason, J.L. and Molinari, M. (2004) Matlab functions provide client functionality to the Grid. In, The Twelfth Global Grid Forum (GGF12), Brussels, Belgium, 20 - 23 Sep 2004. Global Grid Forum9pp. (Submitted).

Price, A.R., Xue, G., Yool, A., Lunt, D.J., Lenton, T.M., Wason, J.L., Pound, G.E., Cox, S.J. and GENIE Team, The (2004) Tuning GENIE earth system model components using a Grid enabled data management system. In, Cox, S. J. (ed.) Proceedings of the UK e-Science All Hands Meeting 2004. UK e-Science All Hands Meeting 2004 , EPSRC, 593-600.

Quinn, S. and Dulieu-Barton, J.M. (2004) Stress anaylsis of holes in thick plates. Applied Mechanics and Materials, 1-2, 153-158.

Quinn, S., Dulieu-Barton, J.M. and Langlands, J.M. (2004) Progress in thermoelastic residual stress measurement. Strain, 40, (3), 127-133. (doi:10.1111/j.1475-1305.2004.00140.x).

Radcliffe, I. and Taylor, M. (2004) Finite element analysis of the resurfaced femoral head. In, 14th Annual Meeting of the European Orthopaedic Research Society, Amsterdam, Netherlands, 2004. , 23.

Reade, Gavin W., Bond, Peter, Ponce de Leon Albarran, Carlos A. and Walsh, Frank C. (2004) The application of reticulated vitreous carbon rotating cylinder electrodes to the removal of cadmium and copper ions from solution. Journal of Chemical Technology and Biotechnology, 79, (9), 946-953. (doi: 10.1002/jctb.1097).

Reade, Gavin W., Nahle, Ayssar H., Bond, Peter, Friedrich, Jens M. and Walsh, Frank C. (2004) Removal of cupric ions from acidic sulfate solution using reticulated vitreous carbon rotating cylinder electrodes. Journal of Chemical Technology and Biotechnology, 79, (9), 935-945. (doi: 10.1002/jctb.1076).

Redford, John A. and Johnson, Mark W. (2004) Predicting transitional separation bubbles. In, TURBOEXPO 2004: International Gas Turbine Congress, Vienna, Austria, 14 - 17 Jun 2004.

Reggiani, B., Leardini, A., Corazza, F., Parenti Castelli, V. and Taylor, M. (2004) Analysis of simulated gait for a novel total ankle replacement using explicit fea. At 14th European Society of Biomechanics Conference (ESB 2004), Hertogenbosch, Netherlands, 02 - 04 Jul 2004.

Reynolds, R.T., Hayden, P., Robins, A.G. and Castro, I.P. (2004) Spanwise variation in rough-wall boundary layers. In, Andersson, H.I. and Krogstad, P.A. (eds.) Advances in turbulence X. Proceedings of the tenth european turbulence conference. Tenth European Turbulence Conference , International Center for Numerical Methods in Engineering, 239-242.

Richards, S., Chen, X.X. and Zhang, X. (2004) Computation of mode radiation from a generic aeroengine intake. European Congress on Computational Methods in Applied Sciences and Engineering: ECCOMAS 2004, Jyvaskyla, Finland, 24 - 28 Jul 2004. European Congress on Computational Methods in Applied Sciences and Engineering20pp.

Richards, S., Zhang, X. and Chen, X. (2004) Acoustic radiation computation from an engine inlet with aerodynamic flow field. 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, USA, 05 - 08 Jan 2004. American Institute of Aeronautics and Astronautics, 1-12.

Robinson, Jamie M, Frey, Jeremy G, Danos, Lefteris and Fu, Honchen (2004) Design of grid computing infrastructure to aid second harmonic generation studies at the liquid/air interface. At Chemical Physics: Perspectives and Prospects for the Future, Paris, France, 05 - 08 Jul 2004. UK, Institute of Physics.

Rona, A. and Zhang, X. (2004) Time accurate numerical study of turbulent supersonic jets. Journal of Sound and Vibration, 270, (1-2), 297-321. (doi:10.1016/S0022-460X(03)00537-6).

Roques, A. and Browne, M. (2004) Failure prediction of bone cement during fatigue using viscoelastic modeling. In, Proceedings of the 7th World Biomaterials Congress, Sydney, Australia, 17 - 21 May 2004. , 1455.

Roques, A., Browne, M. and Taylor, A. (2004) Acoustic emission assessment of the effect of unloading on the fatigue life of bone cement. In, 4th Biomaterials World Congress, Sydney, Australia, 17 - 21 May 2004. , 1454.

Roques, A., Browne, M., Taylor, A., New, A. and Baker, D. (2004) Quantitative measurement of the stresses induced during polymerisation of bone cement. Biomaterials, 25, (18), 4415-4424. (doi:10.1016/j.biomaterials.2003.11.009).

Roques, A., Browne, M., Thompson, J., Rowland, C. and Taylor, A. (2004) Investigation of fatigue crack growth in acrylic bone cement using the acoustic emission technique. Biomaterials, 25, (5), 769-778. (doi:10.1016/S0142-9612(03)00581-7).

Sandberg, R.D. and Fasel, H.F. (2004) High-accuracy DNS of supersonic base flows and control of the near wake. In, Proceedings of Users Group Conference 2004. Users Group Conference 2004 Washington, DC, USA, Institute of Electrical and Electronics Engineers, 80-88. (doi:10.1109/DOD_UGC.2004.22).

Sandberg, R.D. and Fasel, H.F. (2004) Instability mechanisms in supersonic base flows. In, AIAA 42nd Aerospace Sciences Meeting & Exhibit, Reno, US, 05 - 08 Jan 2004.

Sandham, N.D., Morfey, C.L. and Hu, Z.W. (2004) Turbulence simulation for aeroacoustics applications. In, Andersson, H.I. and Krogstad, P.A. (eds.) Advances in Turbulence X: Proceedings of the 10th Euromech European Turbulance Conference. 10th Euromech European Turbulance Conference Barcelona, Spain, International Center for Numerical Methods in Engineering (CIMNE), 97-104.

Sathon, N. and Dulieu-Barton, J.M. (2004) Thermoelastic stress analysis of composite piping components. In, Postgraduate Conference: Material Properties and Characterisation, Southampton, UK, 2003. , 736-737.

Scanlan, J.P. (2004) Design analysis tool for unit cost modelling: a tool for unit cost estimation of gas turbine design within Rolls-Royce. Journal of the Association of Cost Engineers, 42, 8-10.

Scarponi, M., Turnock, S.R. and Shenoi, R.A. (2004) Numerical simulations of mini 6.50 composite masts. Southampton, UK, University of Southampton, 49pp. (Ship Science Reports, (131) ).

Schwingshackl, Christoph, Cunningham, P.R. and Aglietti, G.S. (2004) Honeycomb elastic properties: a review of some existing theories and a new dynamic approach. In, Proceedings of ISMA. ISMA 2004 International Conference on Noise and Vibration Engineering Leuven, Belgium, ISMA Publications, 1353-1366.

Setiawan, Rachman (2004) Composite plate mechanical charaterisation through dynamic tests. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Shim, Dong-Jin, Sun, Hong-Wei, Vengallatore, Srikar T and Spearing, S. Mark (2004) Damage and failure mechanisms in high pressure silicon-glass-metal microfluidic connections. In, LaVan, David A., Ayon, Arturo A., Madou, Mark J., McNie, Mark E. and Prasad, Samouri V. (eds.) Materials Research Society Symposium Proceedings: Micro- and Nanosystems. , Materials Research Society, 69-74.

Sinnett-Jones, P.E., Browne, M., Ludwig, W., Buffiere, J-Y. and Sinclair, I. (2004) Microtomography assessment of failure in acrylic bone cement. In, 14th Annual Meeting of the EORS, Amsterdam, The Netherlands, 25 - 27 Nov 2004. , 1-16.

Smith, S., McCallum, M., Walton, A.J., Harris, J.T.M., Ross, A.W.S., Hourd, A.C., Jiang, Liudi and Stevenson, P.D. (2004) Test structures for CD and overlay metrology on alternating aperture Phase-Shifting Masks. In, Proc. IEEE 2004 Int. Conference on Microelectronic Test Structures. The International Conference on Microelectronic Test Structures (ICMTS '04) , IEEE 2004, 29-34.

Sobester, Andras, Nair, P.B. and Keane, A.J. (2004) Evolving intervening variables for response surface approximations. In, Proceedings of the 10th AIAA/ISSMO multi-disciplinary analysis and optimization conference. Multidisciplinary Analysis and Optimization Conference , American Institute of Aeronautics and Astronautics, 1-12.

Song, Wenbin and Keane, Andew J. (2004) A study of shape parameterisation methods for airfoil optimisation. In, Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference , American Institute of Aeronautics and Astronautics.

Song, Wenbin, Ong, Yew Soon, Ng, Hee Khiang, Keane, A., Cox, S. and Lee, Bu Sung (2004) A service-oriented approach for aerodynamic shape optimisation across institutional boundaries. In, Proceedings of the 8th ICARCV Control, Automation, Robotics and Vision Conference. 8th ICARCV Control, Automation, Robotics and Vision Conference New York, USA, Institute of Electrical and Electronics Engineers. (doi:10.1109/ICARCV.2004.1469786).

Srikar, V.T., Turner, Kevin T., Ie, Tze Yung Andrew and Spearing, S. Mark (2004) Structural design considerations for micromachined solid oxide fuel cells. Journal of Power Sources, 125, (1), 62-69. (doi: 10.1016/j.jpowsour.2003.07.002).

Srikar, Vengallatore, Peles, Yoav, Arana, Leonel R. and Spearing, S.Mark (2004) Self-assembly of micro- and nanoparticles on internal micromachined silicon surfaces. Sensors and Actuators A: Physical, 113, (1), 124-131. (doi: 10.1016/j.sna.2004.03.066).

Starink, M.J. and Dion, A. (2004) DSC study of precipitation in an Al–Mg–Mn alloy microalloyed with Cu. Thermochimica Acta, 417, (1), 5-11. (doi:10.1016/j.tca.2004.01.013).

Starink, M.J., Gao, N. and Yan, J.L. (2004) The origins of room temperature hardening of Al–Cu–Mg alloys. Materials Science and Engineering A, 387-389, (1-2), 222-226. (doi:10.1016/j.msea.2004.01.085).

Starink, Marco J., Gao, Nong, Furukawa, Minoru, Horita, Zenji, Xu, Cheng and Langdon, Terrence G. (2004) Microstructural developments in a spray-cast Al-7034 alloy processed by equal-channel angular pressing. Reviews of Advanced Materials Science, 7, (1), 1-12.

Stephen, N.G. (2004) State space elastostatics of prismatic structures. International Journal of Mechanical Sciences, 46, (9), 1327-1347. (doi:10.1016/j.ijmecsci.2004.07.008).

Stephen, N.G. and Wang, P.J. (2004) Saint-Venant decay rates for the rectangular cross section rod. Journal of Applied Mechanics, 71, (3), 429-433. (doi:10.1115/1.1687794).

Stephen, N.G. and Zhang, Y. (2004) Eigenanalysis and continuum modelling of an asymmetric beam-like repetitive structure. International Journal of Mechanical Sciences, 46, (8), 1213-1231. (doi:10.1016/j.ijmecsci.2004.07.012).

Stokes, P.H. and Swinerd, G.G. (2004) The implementation of cost effective debris protection in unmanned spacecraft. Advances in Space Research, 34, (5), 1090-1096. (doi:10.1016/j.asr.2003.12.007).

Stone, H.B.J., Martin, C.I., Richardson, R.N. and Bowen, R.J. (2004) Modelling of accelerated pipe freezing. Transactions of the Institution of Chemical Engineers Part A: Chemical Engineering Research and Design, 82, (A10), 1353-1359. (doi: 10.1205/cerd.82.10.1353.46736).

Stuck, Arthur, Turnock, Stephen and Bressloff, Neil (2004) An evaluation of the RANS method for the prediction of steady ship rudder performance compared to wind tunnel measurements. Southampton, UK, University of Southampton, 72pp. (Ship Science Reports, (130) ).

Su, Y.H. and Spearing, S.M. (2004) Nonlinear buckling of microfabricated thin annular plates. Thin-Walled Structures, 42, (11), 1543-65. (doi: 10.1016/j.tws.2004.05.006).

Suvichakorn, Aimamorn and Tatnall, Adrian R. (2004) Flow analysis of cloud images from geostationary satellites. In, British Machine Vision Conference (BMVC) 2004, London, UK, 07 - 09 Sep 2004.

Swinerd, Graham, Lewis, Hugh, Williams, Neil and Martin, Clare (2004) Self-induced collision hazard in high and moderate inclination satellite constellations. Acta Astronautica, 54, (3), 191-201. (doi:10.1016/S0094-5765(02)00290-4).

Swingler, J. and McBride, J.W. (2004) Micro-arcing and arc erosion minimisation using a 42 volt DC hybrid switching devices. In, Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts, 2004. 22nd International Conference on Electrical Contacts together with the 50th IEEE Holm Conference on Electrical Contacts USA, Institute of Electrical and Electronics Engineers, 1-7. (doi:10.1109/HOLM.2004.1353086).

Swingler, Jonathan and Mcbride, John W. (2004) Minimising fretting slip in connector terminals using conducting polymer contacts. IEICE Transactions on Electronics, E87-C, (8), 1295-1301.

Syngellakis, S. and Cherukunnath, N. (2004) Boundary element analysis of symmetrically laminated plates. Engineering Analysis with Boundary Elements, 28, (9), 1005-1016. (doi:10.1016/j.enganabound.2004.02.007).

Syngellakis, Stavros and Wu, Jiangwei (2004) Evaluation of various schemes for quasi-static boundary element analysis of polymers. Engineering Analysis with Boundary Elements, 28, (7), 733-745. (doi:10.1016/j.enganabound.2004.01.008).

Sóbester, A., Leary, S.J. and Keane, A.J. (2004) A parallel updating scheme for approximating and optimizing high fidelity computer simulations. Structural and Multidisciplinary Optimization, 27, (5), 371-383. (doi: 10.1007/s00158-004-0397-9).

Tai, Kaihsu, Murdock, Stuart, Wu, Bing, Ng, Muan Hong, Johnston, Steven, Fangohr, Hans, Cox, Simon J., Jeffreys, Paul, Essex, Jonathan W. and Sansom, Mark S.P. (2004) BioSimGrid: towards a worldwide repository for biomolecular simulations. Organic & Biomolecular Chemistry, 2, (22), 3219-3221. (doi:10.1039/b411352g).

Takeda, K. (2004) Book Review. Aeroacoustic Measurements. Journal of Fluid Mechanics, 502, 376-377. (doi:10.1017/S0022112003238398).

Takeda, K., Marshall, D., Waite, T. and LeDonne, R. (2004) Unsteady aerodynamics of race car cockpit flow. In, 5th MIRA Vehicle Aerodynamics Conference, Warwick, GB, 13 - 14 Oct 2004. 10pp.

Takeda, K. and Shieh, C.M. (2004) Cavity tones by computational aeroacoustics. International Journal of Computational Fluid Dynamics, 18, (6), 439-454.

Takeda, K., Zhang, X. and Nelson, P.A. (2004) Computational aeroacoustic simulations of leading-edge slat flow. Journal of Sound and Vibration, 270, (3), 559-572. (doi:10.1016/j.jsv.2003.09.046).

Takeda, Kenji and Newman, Simon (2004) Convergence: the future of flight simulation. At Flight Simulation 1929-2029: A Centennial Perspective, London, UK, 26 - 27 May 2004.

Tan, K.H., Costigan, P. and Taylor, M. (2004) Assessing the performance envelop of TKR using subject specific loads during stair ascent. Transactions of the Annual Meeting - Orthopaedic Research Society, 29

Taylor, M. (2004) Explicit finite element analysis of total knee replacement. In, 6th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Madrid, Spain, 25 - 28 Feb 2004.

Taylor, M. (2004) Finite element analysis of total knee replacement. At The 14th European Society of Biomechanics (ESB) conference, 's-Hertogenbosch, Holland, 04 - 07 Jul 2004.

Taylor, M., Tan, R., Halloran, J. and Rullkoetter, P. (2004) Use of explicit FE in the pre-clinical testing of total knee replacement. In, Cerrolaza, M., Martínez, G., Doblaré, M. and Calvo, B. (eds.) Computational bioengineering: current trends and applications. , Imperial College Press, 23-44.

Thomas, K.S., Molinari, M. and Cox, S.J. (2004) Treatment of boundary conditions in the analysis of PBG structures. In, Proceedings of the Fifth IEE International Conference on Computation in Electromagnetics. Fifth IEE International Conference on Computation in Electromagnetics (CEM 2004) London, UK, The Institution of Engineering and Technology, 51-52. (doi:10.1049/cp:20040442).

Thomas, T. G., Coceal, O., Castro, I.P. and Belcher, S.E. (2004) Turbulent flow over groups of cubical urban-like obstacles. In, 5th Conference on Urban Environment, Vancouver, Canada, 23 - 26 Aug 2004. 9pp.

Toda, H., Sinclair, I., Buffière, J. -Y., Maire, E., Khor, K.H., Gregson, P. and Kobayashi, T. (2004) A 3D measurement procedure for internal local crack driving forces via synchrotron X-ray microtomography. Acta Materialia, 52, (5), 1305-1317. (doi:10.1016/j.actamat.2003.11.014).

Townsend, R.J., Hill, M., Harris, N.R. and White, N.M. (2004) Modelling of particle paths passing through an ultrasonic standing wave. Ultrasonics, 42, (1-9), 319-324. (doi:10.1016/j.ultras.2004.01.025).

Townsend, R.J., Hill, M., Harris, N.R., White, N.M., Wood, R.J.K. and Beeby, S.P. (2004) Fluid modelling of microfluid separator channels. In, Eurosensors XVIII, Rome, Italy, Sep 2004. , 124-125.

Trinidad, Pedro, Walsh, Frank C., Sheppard, Sally A., Gillard, Stephen P. and Campbell, Sheelagh A. (2004) The effect of operational parameters on the performance of a bipolar trickle tower reactor. Journal of Chemical Technology and Biotechnology, 79, (9), 954-960. (doi: 10.1002/jctb.1066).

Tsau, C.H., Schmidt, M.A. and Spearing, S.M. (2004) Characterization of wafer-level thermocompression bonds. Journal of MicroelectroMechanical Systems, 13, (6), 963-71. (doi: 10.1109/JMEMS.2004.838393).

Turangan, Cary Kenny (2004) Free-Lagrange simulations of single cavitation bubble collapse. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Turner, K.T. and Spearing, S.M. (2004) Measurement of work of adhesion on wafers for direct bonding. In, LaVan, David A., Ayon, Arturo A., Madou, Mark J., McNie, Mark E. and Prasad, Samouri V. (eds.) Materials Research Society Symposium Proceedings: Micro- and Nanosystems. , Materials Research Society, 463-468.

Turner, K.T. and Spearing, S.M. (2004) Mechanics of direct wafer bonding. In, 2003 ASME International Mechanical Engineering Congress, Washington, D.C, USA, Nov 2003. , 163-168.

Turner, K.T. and Spearing, S.M. (2004) Role of wafer bow and etch patterns in direct wafer bonding. In, The Seventh International Symposium on Semiconductor Wafer Bonding Science, Technology, and Applications, Paris, France, 27 Apr - 02 May 2003. , 166-174.

Turner, K.T., Thouless, M.D. and Spearing, S.M. (2004) Mechanics of wafer bonding: effect of clamping. Journal of Applied Physics, 95, (1), 349-355. (doi: 10.1063/1.1629776).

Turnock, S.R. and Querard, A.B.G. (2004) Measurements of the evolution of the wake and tip vortex of a control surface undergoing periodic motion. In, 27th American Towing Tank Conference, St. John's, Canada, 06 - 07 Aug 2004. , 1-19.

Ursache, N.M., Bressloff, N.W. and Keane, A.J. (2004) The design of post-buckled spinal structures for airfoil shape control using optimization methods. In, 5th ASMO UK / ISSMO conference on Engineering Design Optimization, Stratford upon Avon, UK, 12 - 13 Jul 2004. , 1-9.

Veres, S.M. (2004) Exploratory modelling for active vibration control. In, IFAC Workshop on Adaptation and Learning in Control, Yokohama, Japan, 30 Aug - 01 Sep 2004. Yokohama, Japan, International Federation of Automatic Control, 321-326.

Veres, S.M. and Luo, J. (2004) A class of BDI agent architectures for autonomous control. In, Proceedings of the 43rd IEEE conference on decision and control. 43rd IEEE Conference on Decision and Control , Institute of Electrical and Electronic Engineers, 4746-4751. (doi: 10.1109/CDC.2004.1429540).

Veres, S.M. and Luo, J. (2004) Formal verification of autonomous control agents. In, Proceedings of the 6th IASTED international conference: intelligent systems and control. 6th International IASTED International Conference: Intelligent Systems and Control , International Association of Science and Technology for Development, 140-144.

Vithana, S.J., Tutty, O.R. and Roberts, G.T. (2004) Numerical simulations of 3-dimensional laminar hypersonic blunt fin interactions. In, Jiang, Zonglin (ed.) Shock Waves: Proceedings of the 24th International Symposium on Shock Waves. 24th International Symposium on Shock Waves China, Tsinghua University Press/Springer.

Wallace, M., Azzam, H. and Newman, S. (2004) Indirect approaches to individual aircraft structural monitoring. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 218, (5), 329-346. (doi: 10.1243/0954410042467059).

Wang, L., Wood, R.J.K., Care, I. and Powrie, H. (2004) Electrostatic wear sensing of ceramic-steel lubricated contacts. In, Lubrecht, A. and Dalmaz, G. (eds.) Transient Processes In Tribology. 30th Leeds-Lyon Symposium on Tribiology , Elsevier, 711-720. (Tribology and Interface Engineering 43).

Wang, Ling and Hope, A.D. (2004) Bearing fault diagnosis using multi-layer neural networks. Insight - Non-Destructive Testing and Condition Monitoring, 46, (8), 451-455. (doi: 10.1784/insi.46.8.451.39377).

Wang, S.C. and Starink, M.J. (2004) The assessment of GPB2/S" structures in Al-Cu-Mg alloys. Materials Science and Engineering A, 386, (1-2), 156-163. (doi:10.1016/j.msea.2004.07.006).

Wang, Z.H., Xing, J.T. and Price, W.G. (2004) A study of power flow in a coupled plate-cylindrical shell system. Journal of Sound and Vibration, 271, (3-5), 863-882. (doi:10.1016/S0022-460X(03)00757-0).

Wason, Jasmin, Jiao, Zhuoan, Song, Wenbin, Price, Andrew and Cox, Simon (2004) Deployment and exploitation of Grid-enabled data management for engineers. In, UK e-Science All Hands Meeting 2004, Nottingham, UK, 31 Aug - 03 Sep 2004. EPSRC, 410-417.

Weaver, P.M., Pechrach, K. and McBride, J.W. (2004) The energetics of gas flow and contact erosion during short circuit arcing. IEEE Transactions on Components and Packaging Technologies, 27, (1), 51-56. (doi:10.1109/TCAPT.2004.825787).

Wharton, J.A. and Wood, R.J.K. (2004) Influence of flow conditions on the corrosion of AISI 304L stainless steel. Wear, 256, (5), 525-536. (doi:10.1016/S0043-1648(03)00562-3).

White, C.B., Chambers, A.R. and Roberts, G.T. (2004) Atomic oxygen source calibration issues: a universal approach. In, 7th International Conference on “Protection of Materials and Structures from Space Environment” ICPMSE-7, Toronto, Canada, 10 - 13 May 2004. Toronto, Canada, International Conference on “Protection of Materials and Structures from Space Environment.

White, P.R. and Hammond, J.K. (2004) Signal processing techniques. In, Fahy, Frank and Walker, John (eds.) Advanced Applications in Acoustics, Noise and Vibration. UK, Taylor & Francis, 1-50.

Williams, D.N., Swinerd, G.G., Lewis, H.G. and Gittins, G. (2004) A new fast cloud propagator for use in the GEO regime. Advances in Space Research, 34, (5), 1181-1187. (doi: 10.1016/j.asr.2003.02.033).

Wilson, P.A. and Soso, M.D. (2004) Investigating changes to the downforce curve of a double element airfoil in ground effect. In, Motorsports Engineering Conference & Exposition, Dearborn, USA, Nov 2004. Dearborn, USA, SAE.

Wood, R.J.K. (2004) Challenges of living with erosion-corrosion. In, Advanced materials for fluid machinery second international symposium. Second International Symposium on Advanced Materials for Fluid Machinery , Institution of Mechanical Engineers, 113-132.

Wood, R.J.K., Jones, T.F., Fraige, F. and Langston, P.A. (2004) Particle distribution patterns in pipeflow for modelling wear. In, Proceedings of the 16th international conference on hydrotransport. 16th International Conference on Hydrotransport , BHR Group, 595-608.

Wood, R.J.K., Jones, T.F., Ganeshalingam, J. and Miles, N.J. (2004) Comparison of predicted and experimental erosion estimates in slurry ducts. Wear, 256, (9-10), 937-947. (doi:10.1016/j.wear.2003.09.002).

Wood, R.J.K. and Speyer, A.J. (2004) Erosion-corrosion of candidate HVOF aluminium-based marine coatings. Wear, 256, (5), 545-556. (doi:10.1016/S0043-1648(03)00564-7).

Worden, K. and Dulieu-Barton, J.M. (2004) An overview of intelligent fault detection in systems and structures. Structural Health Monitoring, 3, (1), 85-98. (doi: 10.1177/1475921704041866).

Worden, K., Spencer, A.B. and Dulieu-Barton, J.M. (2004) The effect of crack-tip interactions on the curve-fitting of isopachics. Applied Mechanics and Materials, 1-2, 121-126.

Worgan, J.F., Edmunds, T.M. and Keane, A.J. (2004) Preliminary fan-blade design using intermediate response approximations. Journal of Propulsion and Power, 20, (5), 858-862.

Wu, Bing, Dovey, Matthew, Ng, Muan Hong, Tai, Kaihsu, Murdock, Stuart, Fangohr, Hans, Johnston, Steve, Jeffreys, Paul, Cox, Simon, Essex, Jonathan W. and Sansom, Mark S.P. (2004) A web/grid portal implementation of BioSimGrid: a biomolecular simulation database. Journal of Digital Information Management, 2, (2), 74-78.

Wu, Bing, Dovey, Matthew, Ng, Muan Hong, Tai, Kaishu, Murdock, Stuart, Jeffreys, Paul, Cox, Simon, Essex, Jonathan and Sansom, Mark S.P. (2004) A web/grid portal implementation of BioSimGrid: a biomolecular simulation database. In, Srimani, Pradip K. (ed.) Proceedings ITCC 2004: International Conference on Information Technology: Coding and Computing. ITCC 2004: International Conference on Information Technology: Coding and Computing Los Alamitos, USA, IEEE Computer Society, 50-54. (doi:10.1109/ITCC.2004.1286589).

Wu, Bing, Dovey, Matthew, Tai, Kaihsu, Ng, Muan Hong, Murdock, Stuart, Fangohr, Hans, Johnston, Steven, Jeffreys, Paul, Cox, Simon, Essex, Jonathan W. and Sansom, Mark S.P. (2004) Security and BioSimGrid: a biomolecular simulation database. , University of York, Department of Computer Science (YCS-2004-380).

Xie, Z.-T. and Voke, P.R. (2004) Connectivity of concentration clouds in turbulent flows. In, Recent Advances in Fluid Mechanics - Proceedings of the Fourth International Conference on Fluid Mechanics. Tsinghua, China, Tsinghua University Press & Springer-Verlag.

Xie, Z.T., Voke, P.R., Hayden, P. and Robins, A.G. (2004) LES and extreme value theory - modelling the upper tail of the PDF of concentration in turbulent dispersion. In, Rainer, Friedrich, Geurts, B.J. and Metais, Oliver (eds.) Direct and Large-Eddy Simulation V. Proceedings of the Fifth International ERCOFTAC Workshop on Direct and Large-Eddy Simulation. 5th International ERCOFTAC workshop on Direct and Large-Eddy Simulation Dordrecht, The Netherlands, Springer, 323-332. (ERCOFTAC Series 9).

Xie, Zhengtong, Hayden, Paul, Voke, Peter R. and Robins, Alan G. (2004) Large-eddy simulation of dispersion: comparison between elevated source and ground level source. Journal of Turbulence, 5, (31), 1-23. (doi:10.1088/1468-5248/5/1/031).

Xie, Zhengtong, Voke, Peter R., Hayden, Paul and Robins, Alan G. (2004) Large-eddy simulation of turbulent flow over a rough surface. Boundary-Layer Meteorology, 111, (3), 417-440. (doi:10.1023/B:BOUN.0000016599.75196.17).

Xing, J., Shenoi, R.A., Wilson, P.A. and Xing, J.T. (2004) Fluid flow through porous media subjected to a boundary condition of variable pressure. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 460, (2047), 1905-1920. (doi:10.1098/rspa.2003.1122).

Xing, J.T. and Jin, J. (2004) A mixed mode function-boundary element method for the transient impact analysis of an aircraft landing on a floating structure. 9th International Symposium on Practical Design of Ships and other Floating Structures, Prads2004, 12-17 September, Lubeck-Travemunde, Germany, (edited by H. Keil and E. Lehmann), Schiffbautechnische Gesellschaft e.V. Hamburg, 819-826. (2488).

Xing, J.T., Jin, J. and Price, W.G. (2004) A mathematical model for a very large floating structure - water interaction system excited by the impact of an aircraft landing. International Symposium on Trends in Applications of Mathematics to Mechanics, STAMM'2004, 22-28 August, Darmstadt, Germany, 1-11. (2179).

Xing, J.T. and Price, W.G. (2004) A substructure method for power flow analysis of non-linear systems consisting of linear substructures and non-linear controllers. Proceedings of the Eleventh International Congress on Sound and Vibration (CD-ROM), St. Petersburg, Russian, 5-8 July, Published by IIAV, 2657-2664. (2177).

Xing, J.T. and Price, W.G. (2004) An updated arbitrary-lagrangian-eulerian description in continuum mechanics and its application to nonlinear fluid-structure interaction dynamics. In, XXI International Congress of Theoretical and Applied Mechanics, Warsaw, Poland, 15 - 21 Aug 2004.

Xiong, J.J. and Shenoi, R.A. (2004) Two new practical models for estimating reliability-based fatigue strength of composites. Journal of Composite Materials, 38, (14), 1187-1209. (doi: 10.1177/0021998304042081).

Xiong, J.J. and Shenoi, R.A. (2004) A two-stage theory on fatigue damage and life prediction of composites. Composites Science and Technology, 64, (9), 1331-1343. (doi:10.1016/j.compscitech.2003.10.006).

Xiong, J.J., Shenoi, R.A., Wang, S.P. and Wang, W.B. (2004) On static and fatigue strength determination of carbon fibre/epoxy composites Part 1: experiments. Journal of Strain Analysis for Engineering Design, 39, (5), 529-540. (doi:10.1243/0309324041896452).

Xiong, J.J., Shenoi, R.A., Wang, S.P. and Wang, W.B. (2004) On static and fatigue strength determination of carbon fibre/epoxy composites Part 2: theoretical formulation. Journal of Strain Analysis for Engineering Design, 39, (5), 541-548. (doi:10.1243/0309324041896515).

Xiong, Y., Xing, J.T. and Price, W.G. (2004) A power flow mode theory based on inherent characteristics of damping distributions in systems and its applications. In, XXI International Congress of Theoretical and Applied Mechanics, Warsaw, Poland, 15 - 21 Aug 2004.

Xiong, Y.P., Xing, J.T. and Price, W.G. (2004) Influence of flexible foundation on the dynamic characteristics of an active suspension system generating high stiffness. Proceedings of the Eleventh International Congress on Sound and Vibration (CD-ROM), St. Petersburg, Russian, 5-8 July, Published by IIAV, 233-240. (2178).

Xu, B., Al-Mosawi, M.K., Yang, Y. and Beduz, C. (2004) Fabrication and characterization of Bi-2223 coils for generator applications. In, Proceedings of the twentieth international cryogenic engineering conference (ICEC20). Twentieth International Cryogenic Engineering Conference ICEC20 , Elsevier.

Xu, Fenglian, Eres, M.H., Tao, Feng and Cox, Simon J. (2004) Workflow support for advanced Grid-enabled computing. In, UK e-Science All Hands Meeting 2004, Nottingham, UK, 31 Aug - 03 Sep 2004. EPSRC, 430-437.

Xue, G., Song, W., Keane, A.J. and Cox, S.J. (2004) Developing services for design optimisation on the grid. In, Services Computing, 2004 IEEE International Conference on (SCC'04), Shanghai, China, 15 - 18 Sep 2004. 8pp, 391-398.

Xue, Gang, Song, Wenbin, Cox, Simon J. and Keane, Andy (2004) Numerical optimisation as grid services for engineering design. Journal of Grid Computing, 2, (3), 223-238. (doi: 10.1007/s10723-004-6742-9).

Yan, J, Starink, M.J. and Gao, N. (2004) Modelling of precipitation hardening of Al-Cu-Mg alloys. Materials Forum, 28, 926-932. (2202).

Yang, Q.D., Shim, D.J. and Spearing, S.M. (2004) A cohesive zone model for low cycle fatigue life prediction of solder joints. Microelectronic Engineering, 75, (1), 85-95. (doi: 10.1016/j.mee.2003.11.009).

Yang, Y., Martinez, E. and Norris, W.T. (2004) Configuration and calibration of pickup coils for measurement of ac loss in long superconductors. Journal of Applied Physics, 96, (4), 2141-2149. (doi:10.1063/1.1766100).

Yao, D.L., Zhang, Q., Li, J.C., Xie, Zheng-Tong and Shen, Z.X. (2004) Observation and modelling for terrestrial processes in alpine meadow. Applied Mathematics and Mechanics (English Edition), 25, 488-498. (doi:10.1007/BF02437597).

Yorke, C.P. and Coleman, G.N. (2004) Assessment of common turbulence models for an idealised adverse pressure gradient flow. European Journal of Mechanics - B/Fluids, 23, (2), 319-337. (doi:10.1016/j.euromechflu.2003.07.002).

Yorke, C.P. and Coleman, G.N. (2004) Numerical study of a turbulent wall layer recovering from an adverse pressure gradient. In, Andersson, H.I. and Krogstad, P.A. (eds.) Advances in Turbulence X: Proceedings of the 10th Euromech European Turbulance Conference. 10th Euromech European Turbulance Conference Barcelona, Spain, International Center for Numerical Methods in Engineering (CIMNE), 795-798.

Young, E.A., Avgeros, S. and Yang, Y. (2004) The affect of transients on secondary phase formation in multifilamentary (Bi, Pb)2223/Ag composite tape. Superconductor Science and Technology, 17, (3), 571-574. (doi:10.1088/0953-2048/17/3/044).

Zhang, X. (2004) Some features of ground effect aerodynamics pertinent to racing cars. In, Global Motorsports Congress 2004 , 1-31.

Zhang, X., Senior, A. and Ruhrmann, A. (2004) Vortices behind a bluff body with an upswept aft section in ground effect. International Journal of Heat and Fluid Flow, 25, (1), 1-9. (doi:10.1016/j.ijheatfluidflow.2003.11.002).

Zhang, Xin, Chen, X., Morfey, C.L. and Nelson, P.A. (2004) Computation of spinning modal radiation from an unflanged duct. AIAA Journal, 42, (9), 1795-1801.

Zhang, Xin and Zerihan, Jonathan (2004) Edge vortices of a double element wing in ground effect. Journal of Aircraft, 41, (5), 1127-1137.

Zhang, Xin and Zerihan, Jonathan (2004) Edge vortices of a double element wing in ground effect. In, AIAA Aerospace Sciences Meeting and Exhibit, 40th, Reno, NV, Reno, USA, 14 - 17 Jan 2002. Reno, USA, American Institute of Aeronautics and Astronautics15pp, 1-12.

Zhou, Zongzhao, Ong, Yew Soon and Nair, P.B. (2004) Hierarchical surrogate-assisted evolutionary optimization framework. In, Congress on evolutionary computing. Congress on Evolutionary Computing 2004 , Institute of Electrical and Electronics Engineers, 1586-1593. (doi: 10.1109/CEC.2004.1331085).