Browse by Divisions pre August 2011

Dulieu-Barton, J.M. and Quinn, S. (eds.) (2005) Advances in Experimental Mechanics IV, Switzerland, Trans Tech, 460pp. (Applied Mechanics and Materials, 3-4).

Griffiths, G. and Walton, D.W.H. (eds.) (2005) A Century of "Discovery": Antarctic exploration and the Southern Ocean. Papers presented at an international symposium held at the Southampton Oceanography Centre, 28-30 June 2004. Archives of Natural History, 32, (2), 128-414.

Newman, Simon (ed.) (2005) Special issue on shipborne aviation. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 219, (5), 363-469.

Abdulrahman, Ashraf (2005) An investigation into the stability and robustness of two sensorless control techniques for brushless PM motors. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 191pp.

Adams, G.G., Barber, J.R., Ciavarella, M. and Rice, J.R. (2005) A paradox in sliding contact problems with friction. Journal of Applied Mechanics, 72, (3), 450-452. (doi:10.1115/1.1867992).

Ahmed, T.M., Du, S.X., Hudson, D.A., Kingsland, P.W. and Temarel, P. (2005) Improvement of seakeeping prediction methods for high speed vessels with a transom stern. In, Eighth International Conference on Fast Sea Transportation, St. Petersburg, Russia, 27 - 30 Jun 2005.

Al-Mosawi, M.K., Beduz, C. and Yang, Y. (2005) Construction of a 100 kVA high temperature superconducting synchronous generator. IEEE Transactions on Applied Superconductivity, 15, (2, Part 2), 2182-2185. (doi:10.1109/TASC.2005.849607).

Al-Mosawi, M.K., Xu, B., Beduz, C., Yang, Y. and Stephen, N.G. (2005) Mechanism of improvement in bending strain tolerance for reinforced Bi2223 superconducting tapes. In, EUCAS 2005: European Conference on Applications of Superconductivity, Vienna, Austria, 11 - 15 Sep 2005. Vienna, Austria, EUCAS 2005: European Conference on Applications of Superconductivity, 1-4.

Alonso-Vazquez, A., Van Lenthe, H., Taylor, M. and Mueller, R. (2005) Comparison of micro-CT measurements and FE predictions of localised failure in a cancellous bone analogue material. In, Middleton, John, Shrive, Nigel G. and Jones, Malcolm L. (eds.) 6th International Symposium on Computer Methods in Biomechanics and Biomechanical Engineering: CMBBE 2004 Proceedings. 6th International Symposium on Computer Methods in Biomechanics and Biomechanical Engineering (CMBBE 2004) , FIRST Numerics.

Amirante, Dario and Luo, Kai H. (2005) A numerical investigation on vortex breakdown in swirling jets. IASME Transactions, 2, (7), 1221-1226.

Anderson, S.R., Kadirkamanathan, V., Chipperfield, A.J., Sharifi, V. and Swithenbank, J. (2005) Multi-objective optimization of operational variables in a waste incineration plant. Computers & Chemical Engineering, 29, (5), 1121-1130. (doi:10.1016/j.compchemeng.2004.12.001).

Ashcroft, Graham and Zhang, Xin (2005) Vortical structures over rectangular cavities at low speed. Physics of Fluids, 17, (1), 015104-[8pp]. (doi:10.1063/1.1833412).

Asif, M., Arshad, M.R. and Wilson, P.A. (2005) AGV guidance system: an application of simple active contour for visual tracking. In, Proceedings of Enformatika: Transactions on Engineering, Computing and Technology. Enformatika 2005 Madrid, Spain, World Academy of Science, Engineering and Technology, 74-77.

Avgeros, S., Al-Mosawi, M., Young, E.A. and Yang, Y. (2005) Promotion of melt-assisted growth in Bi-2223 tapes utilizing rapid heating rates. Superconductor Science and Technology, 18, (4), 526-530. (doi:10.1088/0953-2048/18/4/024).

Balasubramanian, N. and Langdon, Terence G. (2005) An analysis of superplastic flow after processing by ECAP. Materials Science and Engineering: A, 410-411, 476-479. (doi:10.1016/j.msea.2005.08.090).

Balasubramanian, N. and Langdon, Terence G. (2005) Flow processes in superplastic yttria-stabilized zirconia: a Deformation Limit Diagram. Materials Science and Engineering: A, 409, (1-2), 46-51. (doi:10.1016/j.msea.2005.06.071).

Banerjee, Sourish and Bhaskar, Atul (2005) Free vibration of cellular structures using continuum modes. Journal of Sound and Vibration, 287, (1-2), 77-100. (doi:10.1016/j.jsv.2004.10.051).

Barber, J., Mellor, B.G. and Wood, R.J.K. (2005) The development of sub-surface damage during high energy solid particle erosion of a thermally sprayed WC-C0-Cr coating. Wear, 259, (1-6), 125-134. (doi:10.1016/j.wear.2005.02.008).

Baretzky, B., Baró, M.D., Grabovetskaya, G.P., Gubicza, J., Ivanov, M.B., Kolobov, Yu.R., Langdon, T.G., Lendvai, J., Lipnitskii, A.G., Mazilkin, A.A., Nazarov, A.A., Nogués, J., Ovidko, I.A., Protasova, S.G., Raab, G.I., Révész, Á., Skiba, N.V., Starink, M.J., Straumal, B.B., Suriñach, S., Ungár, T. and Zhilyaev, A.P. (2005) Fundamentals of interface phenomena in advanced bulk nanoscale materials. Reviews on Advanced Materials Science, 9, (1), 45-108.

Barik, R.C., Wharton, J.A., Wood, R.J.K., Stokes, K.R. and Jones, R.L. (2005) Corrosion, erosion and erosion–corrosion performance of plasma electrolytic oxidation (PEO) deposited Al2O3 coatings. Surface and Coatings Technology, 199, (2-3), 158-167. (doi:10.1016/j.surfcoat.2004.09.038).

Barik, R.C., Wharton, J.A., Wood, R.J.K., Tan, K.S. and Stokes, K.R. (2005) Erosion and erosion–corrosion performance of cast and thermally sprayed nickel–aluminium bronze. Wear, 259, (1-6), 230-242. (doi:10.1016/j.wear.2005.02.033).

Bavykin, D.V., Milsom, E.V., Marken, F., Kim, D.H., Marsh, D.H., Riley, D.J., Walsh, F.C., El-Abiary, K.H. and Lapkin, A.A., Walsh, FC (ed.) (2005) A novel cation-binding TiO2 nanotube substrate for electro- and bioelectro-catalysis. Electrochemistry Communications, 7, (10), 1050-1058. (doi:10.1016/j.elecom.2005.07.010).

Bavykin, Dimitry V., Gordeev, Sergey N., Moskalenko, Andriy V., Lapkin, Alexei A. and Walsh, Frank C. (2005) Apparent two-dimensional behavior of TiO2 nanotubes revealed by light absorption and luminescence. Journal of Physical Chemistry B, 109, (18), 8565-8569. (doi:10.1021/jp050762m).

Bavykin, Dmitry V., Friedrich, Jens M., Lapkin, Alexei A. and Walsh, Frank C., Walsh, Frank C. (ed.) (2005) Stability of aqueous suspensions of titanate nanotubes. Chemistry of Materials, 18, (5), 1124-1129. (doi:10.1021/cm0521875).

Bavykin, Dmitry V., Lapkin, Alexei A., Kolaczkowski, Stan T. and Plucinski, Pawel K. (2005) Selective oxidation of alcohols in a continuous multifunctional reactor: ruthenium oxide catalysed oxidation of benzyl alcohol. Applied Catalysis A: General, 288, (1-2), 175-184. (doi:10.1016/j.apcata.2005.04.042).

Bavykin, Dmitry V., Lapkin, Alexei A., Plucinski, Pawel K., Friedrich, Jens M. and Walsh, Frank C. (2005) Reversible storage of molecular hydrogen by sorption into multilayered TiO2 nanotubes. Journal of Physical Chemistry B, 109, (41), 19422-19427. (doi:10.1021/jp0536394).

Bavykin, Dmitry V., Lapkin, Alexei A., Plucinski, Pawel K., Friedrich, Jens M. and Walsh, Frank C. (2005) TiO2 nanotube-supported ruthenium(III) hydrated oxide: a highly active catalyst for selective oxidation of alcohols by oxygen. Journal of Catalysis, 235, (1), 10-17. (doi:10.1016/j.jcat.2005.07.012).

Bell, D.J., Lu, T.J., Fleck, N.A. and Spearing, S.M. (2005) MEMS actuators and sensors: observations on their performance and selection for purpose. Journal of Micromechanics and Microengineering, 15, S153-S164. (doi:10.1088/0960-1317/15/7/022).

Bello, J.O. and Wood, R.J.K. (2005) Micro-abrasion of filled and unfilled polyamide 11 coatings. Wear, 258, (1-4), 294-302. (doi:10.1016/j.wear.2004.08.008).

Bianchetti, M., Al-Mosawi, M. K., Yang, Y., Beduz, C. and Guinchi, G. (2005) A closed neon liquefier system for testing superconducting devices. In, Cryogenic Engineering Conference and the International Cryogenic Materials Conference, Colorado, USA, 29 Aug - 02 Sep 2005. , 1-4.

Bilek, J., Atkinson, J.K. and Wakeham, W.A. (2005) Repeatability and refinement of a transient hot wire instrument for measuring the thermal conductivity of high temperature melts. In, The Seventeenth European Conference on Thermophysical Properties, Bratislava, Slovak Republic, 05 - 08 Sep 2005.

Bilek, J., Atkinson, J.K. and Wakeham, W.A. (2005) Validation of FE model for transient hot wire thermal conductivity measurements. In, Proceedings of EuroSimE 2005. EuroSimE 2005 , Institute of Electronics and Electronic Engineers.

Bisbos, C.D., Makrodimopoulos, A. and Pardalos, P.M. (2005) Second order cone programming approaches to static shakedown analysis in steel plasticity. Optimization Methods and Software, 20, (1), 25-52. (doi:10.1080/1055678042000216003).

Boltryk, P.J., Harris, C.J. and White, N.M. (2005) An Algorithmic Approach to the Optimal Extraction of Signals from Intelligent Sensors. At 2005 NSTI Nanotechnology Conference & Trade Show, Anaheim, USA, 08 - 12 May 2005.

Boltryk, P.J., Harris, C.J. and White, N.M., Prosser, S. J., Yan, Y. and Lewis, E. (eds.) (2005) Intelligent sensors—a generic software approach. Journal of Physics: Conference Series, 15, (1), 155 -160. (doi:10.1088/1742-6596/15/1/026).

Boltryk, Peter J., Hill, Martyn and White, Paul R. (2005) Improving the resolution of peak estimation on a sparsely sampled surface with high variance using Gaussian processes and radial basis functions. Measurement Science and Technology, 16, (4), 955-965. (doi:10.1088/0957-0233/16/4/007).

Bose, K. and Wood, R.J.K. (2005) High velocity solid particle erosion behaviour of CVD boron carbide on tungsten carbide. Wear, 258, (1-4), 366-376. (doi:10.1016/j.wear.2004.06.005).

Bose, K. and Wood, R.J.K. (2005) Optimum tests conditions for attaining uniform rolling abrasion in ball cratering tests on hard coatings. Wear, 258, (1-4), 322-332. (doi:10.1016/j.wear.2004.09.018).

Bose, K., Wood, R.J.K. and Wheeler, D.W. (2005) High energy solid particle erosion mechanisms of superhard CVD coatings. Wear, 259, (1-6), 135-144. (doi:10.1016/j.wear.2005.02.043).

Bouferrouk, A. and Chernyshenko, S.I. (2005) Tikhonov regularisation in discrete vortex methods. Computers & Fluids, 34, (2), 275-281. (doi:10.1016/j.compfluid.2004.05.003).

Boyd, S.W., Day, A.H. and Winkle, I.E. (2005) Geometric considerations for the design of production-friendly high-speed ship hull forms. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 219, (2), 65-76. (doi:10.1243/147509005X10486).

Boyd, S.W., Dulieu-Barton, J.M. and Rumsey, L. (2005) Thermoelastic stress analysis of composite finger joints. In, Dulieu-Barton, J.M. and Quinn, S. (eds.) Advances in Experimental Mechanics IV. 4th International Conference on Advances in Experimental Mechanics Switzerland, Trans Tech, 149-154. (Applied Mechanics and Materials 3-4).

Boyd, Stephen (2005) Experimental and numerical stress fields in pultruded GRP joints. In, Simulation VersusTest : Linking Computational and Experimental Techniques in Industrial Applications, Nottingham, UK, 09 Nov 2005. 4pp.

Bressloff, Neil W., Banks, Jim and Shearman, Cliff P. (2005) Systematic exploration into the hemodynamic effect of an out-of-plane internal carotid artery. In, 2005 Proceedings of the Summer Bioengineering Conference. 2005 Summer Bioengineering Conference , American Society Of Mechanical Engineers.

Browne, M., Jeffers, J. and Saffari, N. (2005) Non-destructive evaluation of cemented metallic implants for pre-clinical prediction of implant loosening. In, 19th European Conference on Biomaterials, Sorrento, Italy, 11 - 15 Sep 2005.

Browne, M., Roques, A. and Taylor, A. (2005) The acoustic emission technique in orthopaedics: A review. Journal of Strain Analysis for Engineering Design, 40, (1), 59-79. (doi:10.1243/030932405X7638).

Bura, R.O., Roberts, G.T., Yao, Y.F. and Sandham, N.D. (2005) Investigation of supersonic/hypersonic shock-wave/boundary-layer interactions (SBLIs). In, Jiang, Z. (ed.) Shock Waves: Proceedings of the 24th International Symposium on Shock Waves, Beijing, China, July 11-16, 2004. 24th International Symposium on Shock Waves Germany, Springer, 695-700.

Castro, Ian P. (2005) The stability of laminar symmetric separated wakes. Journal of Fluid Mechanics, 532, (1), 389-411. (doi:10.1017/S0022112005004301).

Chan, K.T., Stephen, N.G. and Reid, S.R. (2005) Helical structure of the waves propagating in a spinning Timoshenko beam. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 461, (2064), 3913-3934. (doi: 10.1098/rspa.2005.1524).

Chen, L.J., Ma, C.Y., Stoica, G.M., Liaw, P.K., Xu, C. and Langdon, T.G. (2005) Mechanical behavior of a 6061 Al alloy and an Al2O3/6061 Al composite after equal-channel angular processing. Materials Science and Engineering: A, 410-411, 472-475. (doi:10.1016/j.msea.2005.08.117).

Chen, Zhi-Min and Price, W.G. (2005) Onset of chaotic Kolmogorov flows resulting from interacting oscillatory modes. Communications in Mathematical Physics, 256, (3), 737-766. (doi:10.1007/s00220-005-1290-0).

Chen, Zhi-Min and Price, W.G. (2005) Secondary fluid flows driven electromagnetically in a two-dimensional extended duct. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 461, (2058), 1659-1683. (doi: 10.1098/rspa.2005.1454).

Chernyshenko, S.I. and Baig, M.F. (2005) The mechanism of streak formation in near-wall turbulence. Journal of Fluid Mechanics, 544, (n/a), 99-131. (doi:10.1017/S0022112005006506).

Chernyshenko, S.I. and Baig, M.F. (2005) Streaks and vortices in near-wall turbulence. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 363, (1830), 1097-1107. (doi: 10.1098/rsta.2005.1552).

Chernyshenko, S.I., Iollo, A., DiCicca, G.M., Hu, N.D. and Smirnov, A.V. (2005) Placebo verification technique in the analysis and interpretation of turbulent velocity fields. Southampton, UK, University of Southampton, 8pp. (Aeronautics and Flight Mechanics (AFM), (AFM-05/01) ).

Chinchapatnam, Phani P., Djidjeli, K. and Nair, Prasanth B. (2005) Meshless domain decomposition schemes for nonlinear elliptic PDEs. In, The Proceedings of the Short Papers of the Third M.I.T. Conference on Computational Fluid and Solid Mechanics. Third M.I.T. Conference on Computational Fluid and Solid Mechanics , Elsevier, 1082-1086.

Chinchapatnam, Phani P., Djidjeli, K. and Nair, Prasanth B. (2005) Meshless solution of the Burgers equation. In, Proceedings of the ECCOMAS Thematic Conference on Meshless Methods. ECCOMAS Thematic Conference on Meshless Methods , DM-IST, D43.1-D43.5.

Chinh, Nguyen Q., Illy, Judit, Horita, Zenji and Langdon, Terence G. (2005) Using the stress–strain relationships to propose regions of low and high temperature plastic deformation in aluminum. Materials Science and Engineering: A, 410-411, 234-238. (doi:10.1016/j.msea.2005.08.086).

Choi, D., Shinavski, R.J., Steffier, W.S. and Spearing, S.M. (2005) Residual stress in thick low-pressure chemical-vapor deposited polycrystalline SiC coatings on Si substrates. Journal of Applied Physics, 97, (7) (doi: 10.1063/1.1866495).

Ciavarella, M. and Barber, J.R. (2005) Stability of thermoelastic contact for a rectangular elastic block sliding against a rigid wall. European Journal of Mechanics - A/Solids, 24, (3), 371-376. (doi:10.1016/j.euromechsol.2004.10.008).

Ciavarella, M., Dibello, S., Demilio, G. and McBride, J.W. (2005) Conductance of rough surfaces. In, XXXIV Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni [AIAS 2005], Milan, Italy, 14 - 17 Sep 2005.

Clements, R.J., Wilson, P.A., Lewthwaite, J.C., Molland, A.F. and Ivanov, P. (2005) The potential for the use of a novel craft, PACSCAT (partial air cushion supported catamaran), in inland European waterways. In, Proceedings of FAST 2005. FAST 2005 [Eighth International Conference on Fast Sea Transportation] , The Institute of Marine Engineering, Science and Technology, 1-7.

Coleman, G.N., Johnstone, R. and Ashworth, M. (2005) DNS of the turbulent Ekman layer at Re=2000. In, ERCOFTAC Workshop: Direct and Large-Eddy Simulation-6, Poitiers, France, 12 - 14 Sep 2005.

Coleman, G.N., Johnstone, R. and Spalart, P.R. (2005) Direct numerical simulation of the turbulent Ekman layer at Re=2000. Southampton, UK, University of Southampton, 13pp. (School of Engineering Sciences Aerospace Engineering AFM Reports, (05/06) ).

Coleman, R.B. and Richardson, R.N. (2005) A novel closed cycle cryosurgical system. International Journal of Refrigeration, 28, (3), 412-418. (doi:10.1016/j.ijrefrig.2004.07.021).

Cotton, John R., Winwood, Keith, Zioupos, Peter and Taylor, Mark (2005) Damage rate is a predictor of fatigue life and creep strain rate in fatigue of tensile cortical bone samples. Journal of Biomechanical Engineering, 127, (2), 213-219. (doi:10.1115/1.1865188).

Day, Ian N.M., Aldahmesh, Mohammed A., Haddad, Lema, Alharbi, Khalid K., Chen, Xiao-he, Rassoulian, Hamid, Humphries, Steve E., Spanakis, Emmanuel and Eccles, Diana, Human Genome Organization (HUGO) (2005) MeltMADGE: economical very high-throughput mutation scanning using thermal ramp electrophoresis in conjunction with MADGE (microplate array) gels. In, Taylor, Graham R. and Day, Ian N. (eds.) Guide to Mutation Detection. Hoboken, USA, Wiley, 85-99.

Dobatkin, Sergey V., Bastarache, Elena N., Sakai, Genki, Fujita, Takeshi, Horita, Zenji and Langdon, Terence G. (2005) Grain refinement and superplastic flow in an aluminum alloy processed by high-pressure torsion. Materials Science and Engineering: A, 408, (1-2), 141-146. (doi:10.1016/j.msea.2005.07.023).

Doerffel, D. and Abu-Sharkh, S.M. (2005) Efficient testing and evaluation methods for faster market introduction of large lithium-ion batteries. In, First International Symposium on Large Lithium Ion Battery Technology and Application

Doyle, Crispin, Quinn, S. and Dulieu-Barton, Janice M. (2005) Evaluation of rugged 'smart patch' fibre-optic strain sensors. In, Dulieu-Barton, J.M. and Quinn, S. (eds.) Advances in Experimental Mechanics IV. 4th International Conference on Advances in Experimental Mechanics Switzerland, Trans Tech, 343-348. (Applied Mechanics and Materials 3-4).

Dransfeld, S., Tatnall, A.R., Robinson, I.S. and Mobley, C.D. (2005) Prioritizing ocean colour channels by neural network input reflectance perturbation. International Journal of Remote Sensing, 26, (5), 1043-1048. (doi:10.1080/01431160512331314100).

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2005) Prediction of three-dimensional seakeeping characteristics of fast hull forms: influence of the line integral terms. In, 8th International Conference on Fast Sea Transportation, St. Petersburg, Russia, 27 - 30 Jun 2005. , 8.

Dulieu-Barton, J.M., Dokos, L., Eastop, D., Lennard, F., Chambers, A.R. and Sahin, M. (2005) Deformation and strain measurement techniques for the inspection of damage in works of art. Reviews in Conservation, 6, 63-73.

Dulieu-Barton, J.M. and Stanley, P. (2005) Photoelastic stress analysis of a leaf-spring eyelet. Strain, 41, (4), 163-166. (doi:10.1111/j.1475-1305.2005.00232.x).

Eaton-Evans, J., Dulieu-Barton, J.M., Little, E. and Brown, I. (2005) Thermoelastic stress analysis of Nitinol self-expanding stents. Applied Mechanics and Materials, 3-4, 47-52.

Emery, T., Dulieu-Barton, J.M. and Cunningham, P.R., , . (ed.) (2005) Identification of damage in composite structures using thermoelastic stress analysis. Key Engineering Materials, (293-294), 583-590.

Eres, M.H., Pound, G.E., Jiao, Z., Wason, J.L., Xu, F., Keane, A.J. and Cox, S.J. (2005) Implementation and utilisation of a Grid-enabled problem solving environment in Matlab. Future Generation Computer Systems, 21, (6), 920-929. (doi:10.1016/j.future.2003.12.016).

Fadeyev, Vitaliy, Haber, Carl, Maul, Christian, McBride, John W. and Golden, Mitchell (2005) Reconstruction of recorded sound from an Edison cylinder using three-dimensional noncontact optical surface metrology. Journal of the Audio Engineering Society, 53, (6), 485-508.

Fallows, C.D. (2005) AUTOSUB propulsion system investigation: characterisation of the force measurement system. Southampton, UK, University of Southampton, 28pp. (Ship Science Reports, (133) ).

Fallows, C.D. (2005) AUTOSUB propulsion system investigation: laboratory data pre-processing. Southampton, UK, University of Southampton, 10pp. (Ship Science Reports, (134) ).

Fallows, C.D. (2005) AUTOSUB propulsion system investigation: supplementary information. Southampton, UK, University of Southampton, 123pp. (Ship Science Reports, (135) ).

Fallows, C.D. (2005) AUTOSUB propulsion system investigation: theory of experiment design. Southampton, UK, University of Southampton, 20pp. (Ship Science Reports, (132) ).

Finlayson, C.E., Amezcua, A., Sazio, P.J.A., Walker, P.S., Grossel, M.C., Curry, R.J., Smith, D.C. and Baumberg, J.J. (2005) Infrared emitting PbSe nanocrystals for telecommunications window applications. Journal of Modern Optics, 52, (7), 955-964. (doi:10.1080/09500340512331327589).

Fragaki, A. and Markvart, T. (2005) Does climate change affect the design of stand-alone PV systems? Progress in Photovoltaics: Research and Applications, 13, (7), 635-639. (doi: 10.1002/pip.617).

Frías-Ferrer, Angel, González-García, José, Sáez, Verónica, Expósito, Eduardo, Sánchez-Sánchez, Carlos M., Montiel, Vicente, Aldaz, Antonio and Walsh, Frank C. (2005) The entrance and exit effects in small electrochemical filter-press reactors used in the laboratory. Journal of Chemical Education, 82, 1395-1398.

Fujita, Kazuko, Fujita, Takeshi, Oh-ishi, Keiichiro, Kaneko, Kenji, Horita, Zenji and Langdon, Terence G. (2005) Microstructures after processing by aging and ECAP for Al-Mg2Si alloys containing excess Si or Mg. In, Zhong, Z.Y., Saka, H., Kim, T.H., Holm, E.A., Han, Y.F. and Xie, X.S. (eds.) PRICM-5. 5th Pacific Rim International Conference on Advanced Materials and Processing Switzerland, Trans Tech, 4047-4050. (Materials Science Forum 475-479).

Fujiwara, Toshifumi, Hearn, Grant E., Kitamura, Fumitoshi and Ueno, Michio (2005) Sail–sail and sail–hull interaction effects of hybrid-sail assisted bulk carrier. Journal of Marine Science and Technology, 10, (2), 82-95. (doi:10.1007/s00773-005-0191-4).

Furui, Mitsuaki, Xu, Cheng, Aida, Tetsuo, Inoue, Makoto, Anada, Hiroshi and Langdon, Terence G. (2005) Improving the superplastic properties of a two-phase Mg–8% Li alloy through processing by ECAP. Materials Science and Engineering: A, 410-411, 439-442. (doi:10.1016/j.msea.2005.08.143).

Furukawa, Minoru, Horita, Zenji and Langdon, Terence G., Watanabe, Tadao and Tsurekawa, Sadahiro (eds.) (2005) Processing by equal-channel angular pressing: applications to grain boundary engineering. Journal of Materials Science, 40, (4), 909-917. (doi: 10.1007/s10853-005-6509-0).

Furukawa, Minoru, Kawasaki, Yoshiyasu, Miyahara, Yuichi, Horita, Zenji and Langdon, Terence G. (2005) An investigation of the deformation process during equal-channel angular pressing of an aluminum single crystal. Materials Science and Engineering: A, 410-411, 194-200. (doi:10.1016/j.msea.2005.08.082).

Gao, N., Brown, M.W., Miller, K.J. and Reed, P.A.S. (2005) An investigation of crack growth behaviour under creep-fatigue condition. Materials Science and Engineering A, 410-411, 67-71. (doi:10.1016/j.msea.2005.08.076).

Gao, N., Starink, M.J., Davin, L., Cerezo, A., Wang, S.C. and Gregson, P.J. (2005) Microstructure and precipitation in Al-Li-Cu-Mg-(Mn, Zr) alloys. Materials Science and Technology, 21, (9), 1010-1018. (doi:10.1179/174328405X27034).

Gao, N., Wang, S.C., Ubhi, H.S. and Starink, M.J. (2005) A comparison of grain size determination by light microscopy and EBSD analysis. Journal of Materials Science Letters, 40, (18), 4971-4974. (doi:10.1007/s10853-005-3867-6).

Gao, Nong, Starink, Marco J., Furukawa, Minoru, Horita, Zenji, Xu, Cheng and Langdon, Terence G. (2005) Microstructural evolution in a spray-cast aluminum alloy during equal-channel angular pressing. Materials Science and Engineering: A, 410-411, (11), 303-307. (doi:10.1016/j.msea.2005.08.075).

Garvey, Brian, Wiggs, Giles, Castro, Ian P. and Bullard, Joanna, Castro, Ian P (ed.) (2005) Measurements of flows over isolated valleys. Boundary-Layer Meteorology, 117, (3), 417-446. (doi: 10.1007/s10546-005-2079-6).

Gession, P., Gabriel, S.B. and Veres, S.M. (2005) Propulsion system optimisation for satellite formation flying. In, International Space Systems Conference, Brazil, Mar 2005.

Grant, D.S. and Wilson, P.A. (2005) The development of a design tool for rigid inflatable boats. In, Proceedings of the 7th Symposium on High Speed Marine Vehicles [HSMV05]. 7th Symposium on High Speed Marine Vehicles [HSMV05] Naples, Italy, Royal Institution of Naval Architects.

Gratton, G.B. (2005) A theoretical and experimental appraisal of airworthiness evaluation techniques for small light aeroplanes. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 255pp.

Gregory, Jeremy R. and Spearing, S. Mark (2005) Constituent and composite quasi-static and fatigue fracture experiments. Composites Part A: Applied Science and Manufacturing, 36, (5), 665-674. (doi: 10.1016/j.compositesa.2004.07.007).

Gregory, Jeremy R. and Spearing, S.M. (2005) Nanoindentation of neat and in situ polymers in polymer-matrix composites. Composite Science and Technology, 65, (3-4), 595-607. (doi: 10.1016/j.compscitech.2004.09.001).

Griffiths, G. (2005) Autosub under ice. Ingenia, (22), 30-32.

Griffiths, G. (2005) Measuring ocean temperature: what can we learn from Nansen's experience on the "Fram" a century ago? Ocean Challenge, 14, (1), 24-28.

Griffiths, G. (2005) Review of oceanographic equipment and sensors for the detection and measurement of pollutants. Southampton, UK, University of Southampton, 24pp. (Southampton Oceanography Centre Research and Consultancy Report, (99) ).

Griffiths, G., Reece, D., Blackmore, P., Lain, M., Mitchell, S. and Jamieson, J. (2005) Modeling hybrid energy systems for use in AUVs. In, Proceedings of the 14th Unmanned Untethered Submersible Technology (UUST05). 14th International Symposium on Unmanned Untethered Submersible Technology (UUST05) Lee, USA, Autonomous Underwater Systems Institute, 10pp.

Griffiths, Gwyn, Fielding, Sophie and Roe, Howard S.J. (2005) Biological-physical-acoustical interactions. In, Robinson, Allan R., McCarthy, James J. and Rothschild, Brian J. (eds.) The Sea, Volume 12, Biological-Physical Interactions in the Sea. New York, USA, Harvard University Press, 441- 474. (The Sea: Ideas and Observations on Progress in the Study of the Seas).

Han, Bing Q. and Langdon, Terence G. (2005) Achieving enhanced tensile ductility in an Al-6061 composite processed by severe plastic deformation. Materials Science and Engineering: A, 410-411, 430-434. (doi:10.1016/j.msea.2005.08.045).

Han, Bing Q. and Langdon, Terence G. (2005) Improving the high-temperature mechanical properties of a magnesium alloy by equal-channel angular pressing. Materials Science and Engineering: A, 410-411, 435-438. (doi:10.1016/j.msea.2005.08.084).

Harris, N. R., Hill, M., Torah, R., Townsend, R., Beeby, S. P., White, N. M. and Ding, J. (2005) A multilayer thick-film PZT actuator for MEMs applications. In, Eurosensors XIX, Barcelona, Spain, 2005.

Harris, N.R., Hill, M., Townsend, R., White, N.M. and Beeby, S.P. (2005) Performance of a micro-engineered ultrasonic particle manipulator. Sensors and Actuators B: Chemical, 111-112, 481-486. (doi:10.1016/j.snb.2005.03.036).

Hazza, Ahmed, Pletcher, Derek and Wills, Richard (2005) A novel flow battery—A lead acid battery based on an electrolyte with soluble lead(II). Part IV: the influence of additives. Journal of Power Sources, 149, 103-111. (doi:10.1016/j.jpowsour.2005.01.049).

Hetsch, T. and Rist, U. (2005) Applicability and quality of linear stability theory and linear PSE in swept laminar separation bubbles. In, Rath, H.J., Holze, C., Heinemann, H.-J., Henke, R. and Hönlinger, H. (eds.) New Results in Numerical and Experimental Fluid Mechanics V: Contributions to the 14th STAB/DGLR Symposium Bremen, Germany 2004. 14th STAB/DGLR Symposium , Springer. (Notes on Numerical Fluid Mechanics and Multidisciplinary Design (NNFM) 92).

Hill, M., Townsend, R.J., Harris, N.R., White, N.M., Beeby, S.P., McDonnell, M.B. and Cant, N. (2005) Particle concentration using a microfabricated ultrasonic resonator. In, WCU/UI'05: World Congress on Ultrasonics, Beijing, China, 28 Aug - 01 Sep 2005. Beijing, China, World Congress on Ultrasonics, 48.

Hill, Martyn, Townsend, Rosemary J., Harris, Nicholas R., White, Neil M., Beeby, Steve P. and Ding, Jiexiong (2005) An Ultrasonic MEMS Particle Separator with Thick Film Piezoelectric Actuation. In, 2005 IEEE International Ultrasonics Symposium, 18-21 Sep 2005, Rotterdam, Netherlands. Washington DC, IEEE, 1160-1163.

Hopkins, Andrew R., Hansen, Ulrich N. and Amis, Andrew A. (2005) Finite element models of total shoulder replacement: application of boundary conditions. Computer Methods in Biomechanics and Biomedical Engineering, 8, (1), 39-44. (doi: 10.1080/10255840500075205).

Horita, Z., Ohashi, K., Fujita, T., Kaneko, K. and Langdon, T.G. (2005) Achieving high strength and high ductility in precipitation-hardened alloys. Advanced Materials, 17, (13), 1599-1602. (doi: 10.1002/adma.200500069).

Horita, Zenji and Langdon, Terence G. (2005) Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion. Materials Science and Engineering: A, 410-411, 422-425. (doi:10.1016/j.msea.2005.08.133).

Huang, Taotao, Johnstone, A., Yang, Yifeng, Beduz, C. and Friend, C. (2005) Finite element modeling of thermal stability and quench propagation in a pancake coil of PbBi2223 tapes. IEEE Transactions on Applied Superconductivity, 15, (2, Part 2), 1647-1650. (doi:10.1109/TASC.2005.849220).

Huang, Xun and Zhang, Xin (2005) Adaptive mesh refinement for computational aeroacoustics. In, 11th AIAA/CEAS Aeroacoustics Conference, Monterey, USA, 23 - 25 May 2005. Monterey, USA, American Institute of Aeronautics and Astronautics14pp.

Huang, Yi and Langdon, Terence G. (2005) Cavitation and failure in a fine-grained Inconel 718 alloy having potential superplastic properties. Materials Science and Engineering: A, 410-411, 130-133. (doi:10.1016/j.msea.2005.08.095).

Jamaluddin, Ahmad Riza (2005) Free-Lagrange simulations of shock-bubble interaction in extracorporeal shock wave lithotripsy. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Jeffers, J., Browne, M., Roques, A. and Taylor, M. (2005) The simulation of bone cement fatigue with experimental validation. At 51st Annual Meeting of the Orthopaedic Research Society, Washington D.C., USA, 20 - 23 Feb 2005. Washington D.C., USA, Orthopaedic Research Society, 279.

Jeffers, Jonathan, Browne, Martin and Taylor, Mark (2005) Parameters influencing the fatigue failure of the implanted femur cement mantle. In, 19th European Conference on Biomaterials [ESB 2005], Naples, Italy, 11 - 15 Sep 2005.

Jeffers, Jonathan R.T., Browne, Martin, Roques, Anne and Taylor, Mark (2005) On the importance of considering porosity when simulating the fatigue of bone cement. Journal of Biomechanical Engineering, 127, (4), 563-570. (doi:10.1115/1.1934182).

Jeffers, Jonathan R.T., Browne, Martin and Taylor, Mark (2005) Damage accumulation, fatigue and creep behaviour of vacuum mixed bone cement. Biomaterials, 26, (27), 5532-5541. (doi:10.1016/j.biomaterials.2005.02.009).

Jiang, Liudi, Hassan, M., Cheung, R., Harris, A.J., Burdess, J.S., Zorman, C.A. and Mehregany, M. (2005) Dry release fabrication and testing of SiC electrostatic cantilever actuators. Microelectronic Engineering, 78-79, 106-111. (doi:10.1016/j.mee.2004.12.015).

Johnson, M.C. and Wilson, P.A. (2005) Sea state estimated from ship motions by a statistical approach. Transactions of The Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 147, 35-51. (doi:10.3940/rina.ijme.2005.a1.050161).

Kaiser, Christian R., Pavlovski, Georgi, Pope, Edward C.D. and Fangohr, Hans (2005) The stability of buoyant bubbles in the atmospheres of galaxy clusters. Monthly Notices of the Royal Astronomical Society, 359, (2), 493-503. (doi:10.1111/j.1365-2966.2005.08902.x).

Kale, M.M. and Chipperfield, A.J. (2005) Stabilized MPC formulations for robust reconfigurable flight control. Control Engineering Practice, 13, (6), 771-788. (doi:10.1016/j.conengprac.2004.09.001).

Kawasaki, Megumi, Huang, Yi, Xu, Cheng, Furukawa, Minoru, Horita, Zenji and Langdon, Terence G. (2005) A quantitative study of cavity development in the tensile testing of an aluminum metal matrix composite processed by equal-channel angular pressing. Materials Science and Engineering: A, 410-411, 402-407. (doi:10.1016/j.msea.2005.08.073).

Kawasaki, Megumi, Xu, Cheng and Langdon, Terence G. (2005) An investigation of cavity growth in a superplastic aluminum alloy processed by ECAP. Acta Materialia, 53, (20), 5353-5364. (doi: 10.1016/j.actamat.2005.08.012).

Keane, Andy and Nair, Prasanth (2005) Computational approaches for aerospace design: the pursuit of excellence, John Wiley & Sons, 602pp.

Kear, G., Barker, B.D., Stokes, K.R. and Walsh, F.C. (2005) Corrosion and impressed current cathodic protection of copper-based materials using a bimetallic rotating cylinder electrode (BRCE). Corrosion Science, 47, (7), 1694-1705. (doi:10.1016/j.corsci.2004.08.013).

Kear, Gareth, Ponce de Leon Albarr, Carlos and Walsh, Frank C. (2005) Reduction of dissolved oxygen at a copper rotating disc electrode. Chemical Engineering Education, 39, (1), 14-21.

Kerimbekov, Ruslan M. and Ruban, Anatoly I. (2005) Receptivity of boundary layers to distributed wall vibrations. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 363, (1830), 1145-1155. (doi: 10.1098/rsta.2005.1556).

Kia, C., Arshad, M.R., Adom, A.D. and Wilson, P.A. (2005) Supervisory fuzzy learning control for underwater target tracking. In, Proceedings of Enformatika. Enformatika '05 Istanbul, Turkey, World Enformatika Society, 92-95. (Enformatika Transactions on Engineering, Computing and Technology, 6).

Kolachalama, V.B., Bressloff, N.W. and Nair, P.B. (2005) Multi-objective shape optimization of the human carotid artery. In, Bathe, K.J. (ed.) Computational Fluid and Solid Mechanics 2005: Proceedings, Third MIT Conference on Computational Fluid and Solid Mechanics, June 14-17 2005. Third MIT Conference on Computational Fluid and Solid Mechanics Cambridge, USA, Elsevier, 1310-1314.

Kolachalama, V.B., Bressloff, N.W., Nair, P.B. and Shearman, C.P. (2005) A parametric study of the hemodynamic behavior in a one dimensional systemic elastic artery: Application to stent design. In, 12th International Conference on Biomedical Engineering, Singapore, 07 - 10 Dec 2005.

Kramer, Denis, Zhang, jianbo, Shimoi, Ryoichi, Lehmann, Eberhard, Wokaun, Alexander, Shinohara, Kazuhiko and Scherer, Gunther G. (2005) In situ diagnostic of two-phase flow phenomena in polymer electrolyte fuel cells by neutron imaging: Part A. Experimental, data treatment, and quantification. Electrochimica Acta, 50, (13), 2603-2614. (doi:10.1016/j.electacta.2004.11.005).

Krishnan, L. and Sandham, N.D. (2005) On the merging of turbulent spots in a supersonic boundary-layer flow. In, Fourth International Symposium on Turbulence and Shear Flow Phenomena, Williamsburg, USA, 27 - 29 Jun 2005.

Krishnan, L., Yao, Y., Sandham, N.D. and Roberts, G.T. (2005) On the response of shock-induced separation bubble to small amplitude disturbances. Modern Physics Letters B, 19, (28-29), 1495-1498. (doi:10.1142/S0217984905009742).

Krishnan, Lakshmi Narasimhan (2005) Dynamics of turbulent spots in a compressible boundary layer. In, Aerodynamics and Flight Mechanics Research Group Seminar, Southampton, UK, 16 Feb 2005. 6pp.

Kumar, A., Nair, P.B., Keane, A.J. and Shahpar, S. (2005) Probabilistic performance analysis of eroded compressor blades. In, PWR2005: ASME Power, Chicago, USA, Apr 2005. American Society of Mechanical Engineers.

Kumar, Apurva, Keane, A.J., Nair, P.B. and Shahpar, S. (2005) Efficient genetic algorithm based robust design method for compressor fan blades. In, ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Long Beach, USA, Sep 2005. 9pp, 1-9.

Kumar, Praveen, Xu, Cheng and Langdon, Terence G. (2005) The significance of grain boundary sliding in the superplastic Zn–22% Al alloy after processing by ECAP. Materials Science and Engineering: A, 410-411, 447-450. (doi:10.1016/j.msea.2005.08.092).

Labbé, D.F.L. and Wilson, P.A. (2005) A numerical investigation of the effects of the spanwise length on the three-dimensional wake of a circular cylinder. In, Proceedings of the Fourth Conference on Bluff Body Wakes and Vortex-Induced Vibrations (BBVIV-4). Fourth Conference on Bluff Body Wakes and Vortex-Induced Vibrations [BBVIV-4] , Cornell University.

Lafronza, L., Song, W., McAlpine, A., Astley, R.J. and Keane, A.J. (2005) Liner optimization using a hybrid finite element method. In, 6th European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics, Lille, France, 07 - 11 Mar 2005. European Turbomachinery Conference, 1085-1095.

Lai, H. and Luo, K. (2005) Acoustic source and near field of three-dimensional flow over an open cavity. In, 11th AIAA/CEAS Aeroacoustics Conference Online Proceedings. 11th AIAA/CEAS Aeroacoustics Conference (26th AIAA Aeroacoustics Conference) , American Institute of Aeronautics and Astronautics.

Lai, H. and Luo, K.H. (2005) Three-dimensional effects in compressible open cavity flows. In, Proceedings of the Fourth International Symposium on Turbulence and Shear Flow Phenomena - 2005: TSFP-4. Fourth International Symposium on Turbulence and Shear Flow Phenomena - 2005: TSFP-4 , National Aeronautics and Space Administration, 1019-1024.

Lam, L., McBride, J.W., Maul, C. and Atkinson, J.K. (2005) Displacement measurements at the connector contact interface employing a novel thick film sensor. In, Proceedings of the Fifty-First IEEE Holm Conference on Electrical Contacts, 2005. Fifty-First IEEE Holm Conference on Electrical Contacts USA, Institute of Electrical and Electronics Engineers, 89-96. (doi:10.1109/HOLM.2005.1518228).

Lam, L., McBride, J.W. and Swingler, J. (2005) The fretting characteristics of intrinsically conducting polymer contacts. In, Proceedings of the 51st IEEE Holm Conference on Electrical Contacts, 2005. 51st IEEE Holm Conference on Electrical Contacts USA, Institute of Electrical and Electronics Engineers, 196-203. (doi:10.1109/HOLM.2005.1518244).

Langdon, T.G. (2005) An analysis of flow mechanisms in high temperature creep and superplasticity. Materials Transactions, 46, (9), 1951-1956.

Langdon, T.G. (2005) Identifying creep mechanisms in plastic flow. Zeitschrift fur Metallkunde, 96, 522-531.

Lee, D.J., Lee, I.C., Kim, J.W. and Kim, Y.N. (2005) Computational aeroacoustics (CAA). In, 6th KSME-JSME Thermal and Fluids Engineering Conference (TFEC6), Jeju, Korea, 20 - 23 Mar 2005.

Lee, Sang-Joon, Lim, Hee-Chang, Han, Manhee and Lee, Seung S. (2005) Flow control of circular cylinder with a V-grooved micro-riblet film. Fluid Dynamics Research, 37, (4), 246-266. (doi:10.1016/j.fluiddyn.2005.05.002).

Lefebvre, F., Ganguly, S. and Sinclair, I. (2005) Micromechanical aspects of fatigue in a MIG welded aluminium airframe alloy. Part 1. Microstructural characterization. Materials Science and Engineering: A - Structural Materials: Properties, Microstructure and Processing, 397, (1-2), 338-345. (doi:10.1016/j.msea.2005.02.051).

Lefebvre, F. and Sinclair, I. (2005) Micromechanical aspects of fatigue in a MIG welded aluminium airframe alloy. Part 2. Short fatigue crack behaviour. Materials Science and Engineering: A - Structural Materials: Properties, Microstructure and Processing, 407, (1-2), 265-272. (doi:10.1016/j.msea.2005.07.014).

Lenton, T. M., Price, A. R., Cameron, D., Hargreaves, J. and Annan, J. the GENIE team (2005) Unpredictable fate of the thermohaline circulation under future CO2 scenarios. Geophysical Research Abstracts, 7, 5561-5561.

Letki, L. and Hudson, D.A. (2005) Simulation of ship manoeuvring performance in calm water and waves. Southampton, UK, University of Southampton, 106pp. (Ship Science Reports, (138) ).

Lewis, H.G. (2005) PCAP module 2 in-depth study report: reflections on peer-assessment in astronautics group work. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Lewis, H.G., Swinerd, G.G., Ellis, C.S. and Martin, C.E. (2005) Response of the space debris environment to greenhouse cooling. At Fourth European Conference on Space Debris, Darmstadt, Germany, 18 - 20 Apr 2005.

Lin, H.K., Huang, J.C. and Langdon, T.G. (2005) Relationship between texture and low temperature superplasticity in an extruded AZ31 Mg alloy processed by ECAP. Materials Science and Engineering: A, 402, (1-2), 250-257. (doi:10.1016/j.msea.2005.04.018).

Low, C.T. John, Ponce de Leon, Carlos and Walsh, Frank C. (2005) The rotating cylinder electrode (RCE) and its application to the electrodeposition of metals. Australian Journal of Chemistry, 58, (4), 246-262. (doi: 10.1071/CH05034).

Lunt, D.J., Harris, P., Price, A.R. and Valdes, P.J. (2005) Transient simulations of the last 22,000 years, with a fully dynamic atmosphere in the GENIE earth-system framework. Geophysical Research Abstracts, 7, 7956-7956.

Luo, J.K., Chu, D. P., Flewitt, A.J., Spearing, S.M., Fleck, N.A. and Milne, W.I. (2005) Uniformity control of Ni thin film microstructures deposited by through-mask plating. Journal of The Electrochemical Society, 152, (1), 36-41. (doi: 10.1149/1.1833320).

Luo, J.K., Flewitt, A.J., Spearing, S.M., Fleck, N.A. and Milne, W.I. (2005) Comparison of microtweezers based on three lateral thermal actuator configurations. Journal of Micromechanics and Microengineering, 15, 1294-302. (doi: 10.1088/0960-1317/15/6/022).

Luo, J.K., Flewitt, A.J., Spearing, S.M., Fleck, N.A. and Milne, W.I. (2005) Three types of planar structure microspring electro-thermal actuators with insulating beam constraints. Journal of Micromechanics and Microengineering, 15, (8), 1527-1535. (doi:10.1088/0960-1317/15/8/022).

Luo, J.K., He, J.H., Fu, Y.Q., Flewitt, A.J., Spearing, S.M., Fleck, N.A. and Milne, W.I. (2005) Fabrication and characterization of diamond-like carbon/Ni bimorph normally closed microcages. Journal of Micromechanics and Microengineering, 15, (8), 1406-1413. (doi: 10.1088/0960-1317/15/8/005).

Luo, JiKui J., He, JohnnyH., Flewitt, Andrew, Moore, D.F., Spearing, S.M., Fleck, Norman A. and Milne, W.I. (2005) Development of all metal electrothermal actuator and its applications. Journal of Microlithography Microfabrication and Microsystems, 4, (2) (doi: 10.1117/1.1898243).

Luo, K. (2005) Numerical simulation of fire suppression by water sprays. In, Second International Conference Fire Bridge 2005, Belfast, Northern Ireland, 09 - 11 May 2005.

Luo, K.H. (2005) Axis switching in turbulent buoyant diffusion flames. Proceedings of the Combustion Institute, 30, (1), 603-610. (doi:10.1016/j.proci.2004.08.133).

Luo, K.H. (2005) Large eddy simulation of variable-density flow and aeroacoustics. In, LES-UK Colloquium on LES, DES and Related Hybrid LES-RANS: Status, Challenges and Prospects in Physically and Geometrically Complex Industrial Flows, London, UK, 03 - 04 Mar 2005.

Ma, Zhaokai, Smith, Malcom, Richards, Simon K. and Zhang, Xin (2005) Slat noise attenuation using acoustic liner. In, 11th AIAA/CEAS Aeroacoustics Conference (26th AIAA Aeroacoustics Conference), Monterey, USA, 23 - 25 May 2005. American Institute of Aeronautics and Astronautics.

Mahon, Stephen and Zhang, Xin (2005) Computational analysis of pressure and wake characteristics of an aerofoil in ground effect. Journal of Fluids Engineering, 127, (2), 290-298. (doi:10.1115/1.1891152).

Mahon, Stephen Alexander (2005) The aerodynamics of multi-element wings in ground effect. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 285pp.

Maneepan, K., Jeong, H.K. and Shenoi, R.A. (2005) Optimisation of FRP top-hat stiffened single skin and monocoque sandwich plates using genetic algorithm. In, The Fifteenth International Offshore and Polar Engineering Conference, Seoul, Korea, 19 - 24 Jun 2005.

Markvart, Tomas and Arnold, Ray (2005) Microgrids: power systems for the 21st century. Ingenia, (24), 24 -27.

Martin, Stacey P., Townsend, Rosemary J., Kuznetsova, Larisa A., Borthwick, Kathryn A.J., Hill, Martyn, McDonnell, Martin B. and Coakley, W. Terence (2005) Spore and micro-particle capture on an immunosensor surface in an ultrasound standing wave system. Biosensors and Bioelectronics, 21, (5), 758-767. (doi:10.1016/j.bios.2005.01.013).

McBride, J.W. and Maul, C. (2005) Intermittency events in bio-compatible electrical contacts. In, Proceedings of the Fifty-First IEEE Holm Conference on Electrical Contacts, 2005. Fifty-First IEEE Holm Conference on Electrical Contacts USA, Institute of Electrical and Electronics Engineers, 75-81. (doi:10.1109/HOLM.2005.1518226).

Mehrez, L., Bah, M.T. and Browne, M. (2005) The application of probabilistic methods for the assessment of hip replacement integrity. In, Transactions of the 51st Annual Meeting of the Orthopaedic Research Society. 51st Annual Meeting of the Orthopaedic Research Society , Orthopaedic Research Society.

Miller, M., Reed, P. and Joyce, M. (2005) Effect of temperature and secondary orientation on notch fatigue resistance of CMSX4. International Journal of Fatigue

Mitin, V.F., McDonald, P.C., Pavese, F., Boltovets, N.S., Kholevchuk, V.V., Nemish, I.Yu., Basanets, V.V., Dugaev, V.K., Sorokin, P.V., Venger, E.F. and Mitin, E.V. (2005) New temperature and magnetic field sensors for cryogenic applications developed under a European Project. In, Zhang, L., Lin, L. and Chen, G. (eds.) Proceedings of the Twentieth International Cryogenic Engineering Conference (ICEC20). Twentieth International Cryogenic Engineering Conference Amsterdam, the Netherlands, Elsevier.

Miyahara, Yuichi, Adachi, Kazuhiko, Maehara, Yasuhiro, Horita, Zenji and Langdon, Terence G. (2005) Effect of microstructures on tensile properties of AZ31 Mg alloy processed by ECAP. In, Ke, H., Han, E.H., Han, Y.F., Kainer, K. and Luo, A.A. (eds.) Magnesium – Science, Technology and Applications. International Conference on Magnesium – Science, Technology and Applications Switzerland, Trans Tech Publications, 473-476. (Materials Science Forum 488-489).

Miyahara, Yuichi, Matsubara, Kiyoshi, Horita, Zenji and Langdon, Terence G. (2005) Grain refinement and superplasticity in a magnesium alloy processed by equal-channel angular pressing. Metallurgical and Materials Transactions A, 36A, (7), 1705-1711.

Moat, B.I., Yelland, M.J., Pascal, R.W. and Molland, A.F. (2005) The effect of ship shape and anemometer location on wind speed measurements obtained from ships. In, 4th International Conference on Marine Computational Fluid Dynamics, Southampton, UK, 30 - 31 Mar 2005. The Royal Institution of Naval Architects, 133-139.

Moat, B.I., Yelland, M.J., Pascal, R.W. and Molland, A.F. (2005) An overview of the airflow distortion at anemometer sites on ships. International Journal of Climatology, 25, (7), 997-1006. (doi:10.1002/joc.1177).

Moffat, A.J., Barnes, S., Mellor, B.G. and Reed, P.A.S. (2005) The effect of silicon content on long crack fatigue behaviour of aluminium–silicon piston alloys at elevated temperature. (In special issue: Fatigue Damage of Structural Materials V). International Journal of Fatigue, 27, (10-12), 1564-1570. (doi:10.1016/j.ijfatigue.2005.06.023).

Molinari, M. and Cox, S.J. (2005) Use of GRID technologies for EIT reconstructions. In, 6th Conference on Biomedical Applications of Electrical Impedance Tomography, London, UK, 22 - 24 Jun 2005. London, UK, University College London3pp, 17-19.

Molinari, Marc (2005) Science and technology for the future. Public Service Review: Central Government, 173-174.

Molinari, Marc and Cox, Simon (2005) Combining physical simulations and chargeable web service applications in engineering workflows. In, Fourth UK e-Science All Hands Meeting, Nottingham, UK, 19 - 22 Sep 2005. EPSRC, 1094-1097.

Molland, A.F., Wilson, P.A., Lewthwaite, J.C. and Taunton, D.J. (2005) An investigation into the hydrodynamic characteristics of a high-speed partial air cushion supported catamaran (PACSCAT). In, Proceedings of FAST 2005. Eighth International Conference on Fast Sea Transportation (FAST 2005) , Institute of Marine Engineering, Science and Technology.

Molleda, F., Mora, J., Molleda, F.J., Carrillo, E. and Mellor, B.G. (2005) Stress trajectories for Mode I fracture. Materials Characterization, 54, (1), 9-12. (doi:10.1016/j.matchar.2004.09.010).

Musker, A.J. (2005) The effect of stabiliser content on the catalytic decomposition of hydrogen peroxide. In, 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibition, Tuscon, USA, 10 - 13 Jul 2005.

Nair, P.B. (2005) Greedy unsymmetric collocation. In, Leitão, V.M.A, Alves, C.J.S. and Duarte, C.A. (eds.) Proceedings of the ECCOMAS Thematic Conference on Meshless Methods. ECCOMAS Thematic Conference on Meshless Methods Lisbon Portugal, DM-IST, A44.1-A44.6.

Narasimhan, S., Shenoi, R.A., Blake, J.I.R. and Boyd, S. (2005) Stress concentrations in a three dimensional hybrid composite-steel joint model. In, 5th International Conference on Composite Science and Technology (ICCST), Sharjah, UAE, 01 - 03 Feb 2005.

Navarro-Martinez, S. and Tutty, O.R. (2005) Numerical simulation of Görtler vortices in hypersonic compression ramps. Computers & Fluids, 34, (2), 225-247. (doi:10.1016/j.compfluid.2004.05.002).

Nayak, A.K., Makarov, G., Shenoi, R.A. and Groves, A. (2005) Unconventional structures with hybrid materials with superelastic inserts. Southampton, UK, University of Southampton

Nayak, A.K. and Shenoi, R.A. (2005) Assumed strain finite elements for buckling and vibration analysis of initially stressed damped composite sandwich plates. Journal of Sandwich Structures and Materials, 7, (4), 307-334. (doi:10.1177/1099636205050084).

New, A.M.R., Taylor, M. and Wroblewski, B.M. (2005) Effect of hip stem taper on cement stresses. Orthopedics, 28, (Supplement 8), s857-s862.

Newman, S. (2005) Helicopter flight/what can it do and what does it cost? Measurement + Control, 38, (9), 271-275.

Newman, S. (2005) Shipborne aviation: an introduction. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 219, (5), 363-368. (doi:10.1243/095441005X30324).

Newman, Simon (2005) The design of rotary wing aircraft - the combination of disciplines - a University perspective. In, 31st European Rotorcraft Forum (ERF), Florence, Italy, 13 - 15 Sep 2005. (Submitted).

Nguyen, Minh Q., Atkinson, Peter M. and Lewis, Hugh G. (2005) Superresolution mapping using a Hopfield neural network with lidar data. IEEE Geoscience and Remote Sensing Letters, 2, (3), 366-370. (doi:10.1109/LGRS.2005.851551).

O'Dea, E., Tutty, O.R. and Rogers, E. (2005) Performance evaluation for robust control of spatial disturbances in channel flow. In, 44th IEEE Conference on Decision and Control, 2005 and 2005 European Control Conference. CDC-ECC '05. 44th IEEE Conference on Decision Control/European Control Conference , IEEE, 518-523.

Ottewill, Gerry A., Reade, Gavin W., Campbell, Sheelagh A., Ponce de Leon, Carlos and Walsh, Frank C. (2005) Electrochemical removal of metal ions from aqueous solution: a student workshop. Journal of Environmental Monitoring, 7, (10), 943-949. (doi: 10.1039/b511142k).

Pahutova, M., Sklenicka, V., Kucharova, K., Svoboda, M. and Langdon, T.G. (2005) Flow mechanisms in creep of short fibre AZ91 alloy-based composite. Kovové materiály - Metallic Materials, 43, (1), 34-44.

Parsch, D., New, A. and Breusch, S. J. (2005) Acetabular pressurisation. In, Breusch, Steffan and Malchau, Henrik (eds.) The Well-Cemented Total Hip Arthroplasty: Theory and Practice. Berlin, Germany, Springer, 164-167. (2929).

Patel, N., Chipperfield, A.J. and Keane, A.J. (2005) Missile endgame analysis via multiobjective optimization. In, Proceedings of 16th IFAC World Congress. 16th IFAC World Congress , Elsevier, 1-6.

Pattenden, R.J., Turnock, S.R., Bissuel, M. and Pashias, C. (2005) Experiments and numerical modelling of the flow around the kvlcc2 hullform at an angle of yaw. In, Proceedings of the 5th Osaka Colloquium on Advanced Research on Ship Viscous Flow and Hull Form Design by EFD and CFD Approaches. 5th Osaka Colloquium on Advanced Research on Ship Viscous Flow and Hull Form Design by EFD and CFD Approaches , Osaka Prefecture University, 163-170.

Pattenden, R.J., Turnock, S.R. and Pashias, C. (2005) Oblique ship flow predictions using identification of vortex centres to control mesh adaptation. In, Proceedings of CFDWS05. CFDWS2005 , Computational Fluid Dynamics, 454-459.

Pattenden, R.J., Turnock, S.R. and Zhang, X. (2005) Measurements of the flow over a low-aspect-ratio cylinder mounted on a ground plane. Experiments in Fluids, 39, (1), 10-21. (doi:10.1007/s00348-005-0949-9).

Pau, Reena, Argles, David, White, S.A. and Lovegrove, Gillian (2005) Computer geek versus computer chic: IT career and IT education. In, 6th International Women into Computing Conference, 14 - 16 Jul 2005.

Paventhan, Arumugam and Takeda, Kenji (2005) MyGridFTP: a zero-deployment GridFTP client using the .NET framework. In, Advances in Grid Computing - EGC 2005: European Grid Conference, Amsterdam, The Netherlands, February 14-16, 2005, Revised Selected Papers. Advances in Grid Computing - EGC 2005: European Grid Conference Berlin, Germany, Springer, 374-383. (Lecture Notes in Computer Science 3470). (doi:10.1007/11508380_39).

Pletcher, Derek and Wills, Richard (2005) A novel flow battery: a lead acid battery based on an electrolyte with soluble lead(II). Part III: the influence of conditions on battery performance. Journal of Power Sources, 149, 96-102. (doi:10.1016/j.jpowsour.2005.01.048).

Plucinski, Pawel K., Bavykin, Dmitry V., Kolaczkowski, Stan T. and Lapkin, Alexei A. (2005) Application of a structured multifunctional reactor for the oxidation of a liquid organic feedstock. Catalysis Today, 105, (3-4), 479-483. (doi:10.1016/j.cattod.2005.06.021).

Plucinski, Pawel K., Bavykin, Dmitry V., Kolaczkowski, Stan T. and Lapkin, Alexei A. (2005) Liquid-phase oxidation of organic feedstock in a compact multichannel reactor. Industrial & Engineering Chemistry Research, 44, (25), 9683-9690. (doi: 10.1021/ie050280x).

Pound, Graeme, Wason, Jasmin, Molinari, Marc, Jiao, Zhuoan and Cox, Simon (2005) GeodiseLab: making the grid usable. In, UK e-Science All Hands Meeting 2005, Nottingham, UK, 19 - 22 Sep 2005. EPSRC, 46-53.

Price, A.R., Jiao, Z., Yool, A., Lunt, D.J., Valdes, P.J., Cameron, D.R., Lenton, T.M., Wason, J.L., Pound, G.E., Cox, S.J. and The GENIE team (2005) GENIE: Exploiting Grid enabled computing and data handling resources for integrated Earth system modelling. Geophysical Research Abstracts, 7, 8716-8716.

Price, Andrew, Lenton, Tim, Cox, Simon, Valdes, Paul, Shepherd, John and The GENIE Team The GENIE team (2005) GENIE: Grid enabled integrated earth system model. ERCIM News, 61, 15-16.

Price, Andrew, Lenton, Tim, Cox, Simon, Valdes, Paul, Shepherd, John and The GENIE Team, (2005) GENIE seeks answers on global changes. GRIDtoday, 4, (15)

Quinn, S., Boyd, S.W., Dulieu-Barton, J.M. and Poulain, N. (2005) Performance of pin-loaded holes in GRP components. 2005 SEM Annual Conference, Portland, Oregon USA, 07 - 09 Jun 2005. Society for Experimental Mechanics8pp.

Ralph, T.R., Hitchman, M.L., Millington, J.P. and Walsh, F.C., Walsh, F.C. (ed.) (2005) The reduction of l-cystine hydrochloride at lead using static and rotating disc electrodes. Journal of Electroanalytical Chemistry, 583, (2), 260-272. (doi:10.1016/j.jelechem.2005.06.009).

Ralph, T.R., Hitchman, M.L., Millington, J.P. and Walsh, F.C. (2005) The reduction of l-cystine hydrochloride at stationary and rotating disc mercury electrodes. Electrochimica Acta, 51, (1), 133-145. (doi:10.1016/j.electacta.2005.04.012).

Ralph, Thomas R., Hitchman, Michael L., Millington, J. Peter and Walsh, Frank C. (2005) The importance of batch electrolysis conditions during the reduction of L-cystine hydrochloride. Journal of The Electrochemical Society, 152, (3), D54-D63. (doi:10.1149/1.1858831).

Rao, A., Keane, A.J. and Scanlan, J.P. (2005) A cost based methodology for design optimization. In, Proceedings of the ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference New York, USA, American Society Of Mechanical Engineers (ASME), 1-10.

Redford, John A. and Johnson, Mark W. (2005) Predicting transitional separation bubbles. Journal of Turbomachinery, 127, (3), 497-501. (doi: 10.1115/1.1860573).

Reed, P.A.S. and Miller, M.D. (2005) Effect of environment on notch fatigue initiation resistance in CMSX4. TMS Letters, 2, (1), 27-28.

Reed, P.A.S., Tucker, P.H. and Joyce, M.R. (2005) Effects of mixed mode loading on fatigue and creep–fatigue in SRR-99 single crystals. Materials Science and Engineering A, 394, (1-2), 256-265. (doi:10.1016/j.msea.2004.11.028).

Richards, S.K., Chen, X.X. and Zhang, X. (2005) Parallel computation of 3D acoustic radiation from an engine intake. 11th AIAA/CEAS Aeroacoustics Conference Proceedings, 2005, 1-16.

Richards, Simon (2005) Aeroacoustic computation of sound radiation from ducts. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Richardson, R.N. and Bowen, R.J. (2005) Steam power project sets 200mph objective. Eureka, 1, 1.

Rokityanski, D. Ya. and Veres, S.M. (2005) Application of ellipsoidal estimation to satellite control. Mathematical and Computer Modelling of Dynamical Systems, 11, (2), 239-249. (doi: 10.1080/13873950500069326n).

Sachdeva, S.K., Nair, P.B. and Keane, A.J. (2005) A new projection scheme for linear stochastic systems. In, Proceedings of the Third M.I.T. Conference on Computational Fluid and Solid Mechanics. Third M.I.T. Conference on Computational Fluid and Solid Mechanics , Elsevier.

Sachdeva, S.K., Nair, P.B. and Keane, A.J. (2005) Recent developments in stochastic reduced basis projection schemes. In, 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Austin, US, 18 - 21 Apr 2005. American Institue of Aeronautics and Astronautics.

Saffari, Nader, Browne, Martin and Rus, Guillermo (2005) Ultrasonic techniques for the assessment of aging and damage accumulation in PMMA cement and cement/metal interfaces. At 19th European Conference on Biomaterials [ESB 2005], Naples, Italy, 11 - 15 Sep 2005.

Sahin, M., Chambers, A.R., Dokos, L., Dulieu-Barton, J.M., Earl, J.S., Eastop, D. and Lennard, F. (2005) Mechanical testing and its role in the condition assessment of tapestries. In, Lennard, Frances and Hayward, Maria (eds.) Tapestry Conservation. United Kingdom, Butterworth-Heinemann Limited, 227-234. (3253).

Sakai, Genki, Horita, Zenji and Langdon, Terence G. (2005) Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion. Materials Science and Engineering: A, 393, (1-2), 344-351. (doi:10.1016/j.msea.2004.11.007).

Sakai, Genki, Nakamura, Katsuaki, Horita, Zenji and Langdon, Terence G. (2005) Developing high-pressure torsion for use with bulk samples. Materials Science and Engineering: A, 406, (1-2), 268-273. (doi:10.1016/j.msea.2005.06.049).

Sampathkumar, Narasimhan (2005) Three dimensional geometrical and material nonlinear finite element analysis of adhesively bonded joints for marine structures. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 245pp.

Sasaki, Daisuke and Obayashi, Shigeru (2005) Efficient search for trade-offs by adaptive range multi-objective genetic algorithms. Journal of Aerospace Computing, Information, and Communication, 2, (1), 44-64.

Sathon, N. and Dulieu-Barton, J.M. (2005) Damage analysis of internal surface flaws using thermoelastic stress analysis. Key Engineering Materials, (293-294), 279-288.

Saunders, C.J., Martin, C.E. and Lewis, H.G. (2005) Disposal orbit characteristics for Galileo including orbit propagation techniques. In, Proceedings of the 4th European Conference Space Debris. 4th European Conference on Space Debris , Eurpoean Space Agency, 685-688. (ESA SP-587).

Schwingshackl, C.W., Aglietti, G.S. and Cunningham, P.R. (2005) Determination of honeycomb material properties: existing theories and an alternative dynamic approach. Journal of Aerospace Engineering, 19, (3), 177-183. (doi:10.1061/(ASCE)0893-1321(2006)19:3(177)).

Shenoi, R.A. and Groves, A. (2005) Materials and structures research thrusts: recommendations for the maritime environment. Southampton, UK, University of Southampton, 30pp. (Ship Science Reports, (139) ).

Shu, W.M., Everett, W.N., Zhang, Q.X., Liu, M.H.H., Trigg, A., Ma, Y.X., Spearing, S.M., Wang, S., Sue, H.J. and Moran, P.M. (2005) Microheated substrates for patterning cells and controlling development. Journal of Microelectromechanical Systems, 14, (5), 924-934. (doi: 10.1109/JMEMS.2005.856677).

Sinnett-Jones, P.E., Browne, M., Ludwig, W., Buffière, J.-Y. and Sinclair, I. (2005) Microtomography assessment of failure in acrylic bone cement. Biomaterials, 26, (33), 6460-6466. (doi:10.1016/j.biomaterials.2005.04.064).

Sinnett-Jones, P.E., Browne, M., Sinclair, I., Jeffers, J.R.T. and Saffari, N. (2005) The tomographic validation of non-destructive techniques for crack detection in acrylic bone cement. At 19th European Conference on Biomaterials [ESB 2005], Naples, Italy, 11 - 15 Sep 2005.

Sinnett-Jones, P.E., Wharton, J.A. and Wood, R.J.K. (2005) Micro-abrasion-corrosion of a CoCrMo alloy in simulated artificial hip joint environments. Wear, 259, (7-12), 898-909. (doi: 10.1016/j.wear.2005.02.045).

Smith, S., Walton, A.J., McCallum, M., Hourd, A.C., Stevenson, J.T.M. and Ross, A.W.S. (2005) Improved test structures for the electrical measurement of feature size on an alternating aperture phase-shifting mask. In, Proceedings of the 2005 International Conference on Microelectronic Test Structures, 2005. ICMTS 2005. International Conference on Microelectronic Test Structures. ICMTS 2005 , Institute of Electrical and Electronics Engineers, 17-22.

Song, W. and Keane, A.J. (2005) An efficient evolutionary optimisation framework applied to turbine blade firtree root local profiles. Structural and Multidisciplinary Optimization, 29, (5), 382-390. (doi:10.1007/s00158-004-0486-9).

Song, W. and Keane, A.J. (2005) A new hybrid updating scheme for an evolutionary search strategy using genetic algorithms and kriging. In, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference , American Institute of Aeronautics and Astronautics, 1-8.

Starink, M.J. (2005) Reduced fracturing of intermetallic particles during crack propagation in age hardening Al-based alloys due to PFZs. Materials Science and Engineering: A, 390, (1-2), 260-264. (doi:10.1016/j.msea.2004.09.053).

Starink, M.J., Gao, N., Davin, L., Yan, J. and Cerezo, A. (2005) Room temperature precipitation in quenched Al-Cu-Mg alloys: a model for the reaction kinetics and yield strength development. Philosophical Magazine, 85, (13), 1395-1417. (doi:10.1080/14786430412331333374).

Starink, M.J., Wang, S.C. and Sinclair, I. (2005) A model for local proof strength of 2xxx welds. In, Jata, Kumar J., Mahoney, M.W. and Mishra, R.S. (eds.) Friction stir welding and processing III. 2005 TMS Annual Meeting , The Minerals, Metals & Materials Society, 223-243.

Stephen, N.G. (2005) How long is a curved beam? The Journal of Strain Analysis for Engineering Design, 40, (3), 295-298. (doi: 10.1243/030932405X7719).

Stephen, N.G. and Ghosh, S. (2005) Eigenanalysis and continuum modelling of a curved repetitive beam-like structure. International Journal of Mechanical Sciences, 47, (12), 1854-1873. (doi:10.1016/j.ijmecsci.2005.07.001).

Stevenage, Sarah and Lewis, Hugh (2005) By which name should I call thee? The consequences of having multiple names. The Quarterly Journal of Experimental Psychology: Section A, 58, (8), 1447-1461. (doi:10.1080/02724980443000692).

Stoica, G.M., Fielden, D.E., McDaniels, R., Liu, Y., Huang, B., Liaw, P.K., Xu, C. and Langdon, T.G. (2005) An analysis of the shear zone for metals deformed by equal-channel angular processing. Materials Science and Engineering: A, 410-411, 239-242. (doi:10.1016/j.msea.2005.08.186).

Stokes, B., Gao, N., Lee, K.K. and Reed, P.A.S. (2005) Effects of carbides on fatigue characteristics of austempered ductile iron. Metallurgical and Materials Transactions A, 36, (4), 977-988. (doi:10.1007/s11661-005-0291-0).

Stokes, P.H. and Swinerd, G.G. (2005) Debris protection optimisation of a realistic unmanned spacecraft using SHIELD. In, Proceedings of the 4th European Conference Space Debris. 4th European Conference on Space Debris , European Space Agency, 515-520. (European Space Agency Special Publication 587). (ESA SP-587).

Stone, Howard B.J., Richardson, R. Neil and Veldhuis, Ivo (2005) An investigation into large-scale hydrogen energy storage in the UK. At International Hydrogen Energy Congress & Exhibition, Istanbul, Turkey, 13 - 15 Jul 2005.

Sumption, Alan (2005) The evolution of break arc erosion from arc initiation to extinction on silver alloy electrical contacts in low voltage DC switches. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 228pp.

Sun, W., McBride, J.W. and Hill, M. (2005) A comparison between the errors in simulated and experimental data in non-contact surface measurement systems. In, Proceedings of the 5th International Conference and 7th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology - EUSPEN 2005. 5th International Conference and 7th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology - EUSPEN 2005 , European Society for Precision Engineering and Nanotechnology, 37-40.

Sun, W., McBride, J.W. and Hill, M. (2005) The error analysis of calibration ball and optical flat measurements using a 3D con-focal scanning system. In, Shore, P. (ed.) Laser Metrology and Machine Performance VII. Laser Metrology and Machine Performance VII: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance (LAMDAMAP 2005) Cranfield, UK, European Society for Precision Engineering and Nanotechnology, 314-321.

Suvichakorn, A. and Tatnall, A.R.L. (2005) The application of cloud texture and motion derived from geostationary satellite images in rain estimation: a study in mid-latitude depressions. In, International Geosceince and Remote Sensing Symposium (IGARSS) 2005, Seoul, Korea, 25 - 29 Jul 2005. IEEE, 1682-1685.

Swingler, J., Sumption, A. and McBride, J.W. (2005) The evolution of contact erosion during an opening operation at 42V. In, Proceedings of the Fifty-First IEEE Holm Conference on Electrical Contacts, 2005. Fifty-First IEEE Holm Conference on Electrical Contacts, 2005 USA, Institute of Electrical and Electronics Engineers, 346-351. (doi:10.1109/HOLM.2005.1518268).

Sóbester, A. and Keane, A.J. (2005) Classifier systems can reduce conceptual design cycle time. In, Proceedings of the 1st International Conference on Innovation and Integration in Aerospace Sciences. 1st International Conference on Innovation and Integration in Aerospace Sciences , American Institute of Aeronautics and Astronautics, 1-9.

Sóbester, András, Keane, A.J., Scanlan, James and Bressloff, Neil W. (2005) Conceptual design of UAV airframes using a generic geometry service. In, Infotech@Aerospace Online Proceedings. Infotech@Aerospace , American Institute of Aeronautics and Astronautics.

Sóbester, András, Leary, Stephen J. and Keane, Andy J. (2005) On the design of optimization strategies based on global response surface approximation models. Journal of Global Optimization, 33, (1), 31-59. (doi: 10.1007/s10898-004-6733-1).

Tan, K.S., Wharton, J.A. and Wood, R.J.K. (2005) Solid particle erosion–corrosion behaviour of a novel HVOF nickel aluminium bronze coating for marine applications—correlation between mass loss and electrochemical measurements. Wear, 258, (1-4), 629-640. (doi:10.1016/j.wear.2004.02.019).

Taylor, A., Roques, A., Browne, M. and New, A. (2005) Evaluation of initial stability of a novel composite stem. Transactions of the Annual Meeting - Orthopaedic Research Society, 30

Thanapalan, K. and Veres, S.M. (2005) Agent based controller for satellite formation flying. In, Proceedings of the International Conference on Intelligent Sensors, Sensor Networks and Information Processing Conference 2005. nternational Conference on Intelligent Sensors, Sensor Networks and Information Processing Conference 2005 Piscataway, USA, Institute of Electrical and Electronics Engineers, 385-389.

Thornton, B., Ura, T., Nose, Y. and Turnock, S. (2005) Internal actuation of underwater robots for unrestricted attitude control. In, Proceedings of 18th Ocean Engineering Symposium. 18th Ocean Engineering Symposium , The Society of Naval Architects and Marine Engineers, 1-8.

Thornton, Blair, Ura, Tamaki, Nose, Yoshiake and Turnock, Stephen R. (2005) Internal actuation of underwater robots using control moment gyros. In, Oceans 2005 - Europe. Oceans '05 Conference USA, Institute of Electrical and Electronics Engineers, 591-598. (doi:10.1109/OCEANSE.2005.1511781).

Townsend, R.J., Hill, M., Harris, N.R. and White, N.M., Sachse, W. and Lewin, P.A. (eds.) (2005) Acoustic resonant modes in a particle separator. Ultrasonics, 44, (Supplement 1), e467-e471. (doi:10.1016/j.ultras.2006.05.025).

Townsend, R.J., Hill, M., Harris, N.R., White, N.M. and Beeby, S.P. (2005) Numerical modelling of a microfluidic ultrasonic particle separator. In, NSTI Nanotechnology Conference & Trade Show, Anaheim, USA, 08 - 12 May 2005. 4pp, 194-197.

Townsend, R.J., Hill, M., Harris, N.R., White, N.M., Beeby, S.P. and Wood, R.J.K (2005) Fluid modelling of microfluidic separator channels. Sensors and Actuators B: Chemical, 111-112, 455-462. (doi:10.1016/j.snb.2005.03.035).

Turner, K.T., Spearing, S.M., Baylies, W.A., Robinson, M. and Smythe, R. (2005) Effect of nanotopogranphy in direct wafer bonding: modeling and measurements. IEEE Transactions on Semiconductor Manufacturing, 18, (2), 289-296. (doi: 10.1109/TSM.2005.845009).

Turnock, Steve R., Squibb, A., van Someren, M., Rock Evans, M., Parker, R. and Leszczynski, R. (2005) Application of simulation technology to the performance evaluation of HMS Victory as an exemplar of the ships within the fleets at Trafalgar. In, Technology of the Ships of Trafalgar: an Homage to their Designers and Constructors, Madrid & Cádiz, Spain, 03 - 05 Nov 2005. , 1-40.

Veldhuis, I.J.S., Richardson, R.N. and Stone, H.B.J. (2005) Hydrogen fuelled gas turbine powered high-speed container ship: A technical and economic investigation. In, FAST 2005: International Conference on Fast Sea Transportation, St-Ptersburg, Russia, 27 - 30 Jun 2005.

Veldhuis, I.J.S., Richardson, R.N. and Stone, H.B.J. (2005) Hydrogen-fuelled high-speed container ship. The Naval Architect, 108-116.

Veres, S.M. (2005) Allowed gain errors for iterative modelling and controller design. In, Proceedings of 16th IFAC World Congress. 16th IFAC World Congress , Elsevier.

Veres, S.M. (2005) Autonomous control systems using agents: an introduction. In, Proceedings of IEE Workshop on Agent Based Control Systems. IEE Workshop on Agent Based Control Systems , Instituiton of Electical Engineers, 1-10. (3270).

Veres, S.M. (2005) The modular intelligent being: review and proposal. In, Proceedings of 16th IFAC World Congress. 16th IFAC World Congress , Elsevier.

Veres, S.M. and Luo, J. (2005) Active structural acoustic control of machine enclosures. In, Proceedings of 16th IFAC World Congress. 16th IFAC World Congress , Elsevier.

Vitanov, V.I. and Voutchkov, I.I. (2005) Process parameters selection for friction surfacing applications using intelligent decision support. Journal of Materials Processing Technology, 159, (1), 27-32. (doi:10.1016/j.jmatprotec.2003.11.006).

Voutchkov, I., Keane, A.J., Bhaskar, A. and Olsen, Tor M. (2005) Weld sequence optimization: the use of surrogate models for solving sequential combinatorial problems. Computer Methods in Applied Mechanics and Engineering, 194, (30-33), 3535-3551. (doi:10.1016/j.cma.2005.02.003).

Walker, J.C., Rainforth, W.M. and Jones , H. (2005) Lubricated sliding wear behaviour of aluminium alloy composites. Wear, 259, (1-6), 577-589. (doi:10.1016/j.wear.2005.01.001).

Walsh, F.C., Trinidad, P. and Gilroy, D. (2005) Conversion expressions for electrochemical reactors which operate under mass transport controlled reactions - Part II: Batch recycle and cascade loop reactors. International Journal of Engineering Education, 21, (5), 981-992.

Wang, Jing Tao, Xu, Cheng, Du, Zhong Ze, Qu, Guo Zhong and Langdon, Terence G. (2005) Microstructure and properties of a low-carbon steel processed by equal-channel angular pressing. Materials Science and Engineering: A, 410-411, 312-315. (doi:10.1016/j.msea.2005.08.111).

Wang, S.C., Browne, M., Ubhi, H.S. and Starink, M.J. (2005) Determination of the fatigue fracture planes of Co-Cr-Mo biomedical alloys using electron backscatter diffraction. Journal of Microscopy, 217, (2), 118-121. (doi:10.1111/j.1365-2818.2005.01394.x).

Wang, S.C. and Li, Y. (2005) In situ TEM study of Nd-rich phase in NdFeB magnet. Journal of Magnetism and Magnetic Materials, 285, (1-2), 177-182. (doi:10.1016/j.jmmm.2004.07.035).

Wang, S.C. and Li, Y. (2005) A new structure of Nd1+εFe4B4 phase in NdFeB magnet. Journal of Materials Science, 40, (14), 3853-3855. (doi: 10.1007/s10853-005-2554-y).

Wang, S.C. and Starink, M.J. (2005) Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys. International Materials Reviews, 50, (4), 193-215. (doi: 10.1179/174328005X14357).

Wang, S.C., Zhu, Z. and Starink, M.J. (2005) Estimation of dislocation densities in cold rolled Al-Mg-Cu-Mn alloys by combination of yield strength data, EBSD and strength models. Journal of Microscopy, 217, (2), 174-178. (doi:10.1111/j.1365-2818.2005.01449.x).

Wang, Shun Cai, Starink, Marco J., Gao, Nong, Xu, Cheng and Langdon, Terence G. (2005) Grain structure and texture development during ECAP of two heat-treatable Al-based alloys. Reviews on Advanced Materials Science, 10, (3), 249-255.

Wang, W., Makarov, G. and Shenoi, R.A. (2005) An analytical model for assessing strain rate sensitivity of unidirectional composite laminates. Composite Structures, 69, (1), 45-54. (doi:10.1016/j.compstruct.2004.04.017).

Ward, C., Da Silva Curiel, Alex., Sweeting, Martin., Aglietti, Gulielmo.S. and Schaffner, Jake (2005) Surrey small satellite transfer vehicle. In, 56th International Astronautical Congress, the International Academy of Astronautics, and the International Institute of Space Law, Fukuoka, Japan, 17 - 21 Oct 2005.

Weaver, P.M., Pechrach, K. and McBride, J.W. (2005) Arc root mobility on piezoelectrically actuated contacts in miniature circuit breakers. IEEE Transactions on Components and Packaging Technologies, 28, (4), 734-740. (doi:10.1109/TCAPT.2005.861119).

Wharton, J.A., Barik, R.C., Kear, G., Wood, R.J.K., Stokes, K.R. and Walsh, F.C. (2005) The corrosion of nickel–aluminium bronze in seawater [in A Century of Tafel’s Equation: A Commemorative Issue of Corrosion Science]. Corrosion Science, 47, (12), 3336-3367. (doi:10.1016/j.corsci.2005.05.053).

Wharton, J.A. and Wood, R.J.K. (2005) Flow corrosion behaviour of austenitic stainless steels UNS S30403 and UNS S31603. Corrosion, 61, 792-806.

Wheeler, D.W. and Wood, R.J.K. (2005) The erosion of CVD diamond by diamond particles. Philosophical Magazine Letters, 85, (7), 367-375. (doi: 10.1080/09500830500251778).

Wheeler, D.W. and Wood, R.J.K. (2005) Erosion of hard surface coatings for use in offshore gate valves. Wear, 258, (1-4), 526-536. (doi:10.1016/j.wear.2004.03.035).

Wilson, P.A., Molland, A.F. and Cartwright, R.J. (2005) A study of the potential replacements for a vessel for the port of London authority. In, Proceedings of FAST2005. FAST2005 [Eighth International Conference on Fast Sea Transportation] , The Institute of Marine Engineering, Science and Technology.

Wong, A.S., New, A.M.R., Isaacs, G. and Taylor, M. (2005) Effect of bone material properties on the initial stability of a cementless hip stem. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 219, (H4), 265-275. (doi: 10.1243/095441105X34293).

Wood, Robert J.K. and Neville, Anne (2005) Second International Conference on Erosive and Abrasive Wear (ICEAW II). Wear, 258, (1-4), 1. (doi:10.1016/j.wear.2004.08.006).

Woods, Christopher J., Ng, Muan Hong, Johnston, Steven, Murdock, Stuart E., Wu, Bing, Tai, Kaihsu, Fangohr, Hans, Jeffreys, Paul, Cox, Simon, Frey, Jeremy G., Sansom, Mark S.P. and Essex, Jonathan W. (2005) Grid computing and biomolecular simulation. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 363, (1833), 2017-2035. (doi: 10.1098/rsta.2005.1626).

Wu, A., Mellor, B.G. and Syngellakis, S. (2005) Experimental and finite element study of welded T-joints. In, Dulieu-Barton, J.M. (ed.) Advances in Experimental Mechanics IV. Switzerland, Trans Tech, 117-124. (Applied Mechanics and Materials 3-4).

Xiao, Y., White, R.G. and Aglietti, G.S. (2005) Comparison of structural response and fatigue endurance of aircraft flap-like box structures subjected to acoustic loading. The Journal of the Acoustical Society of America, 117, (5), 2820-2834. (doi:10.1121/1.1853934).

Xiao, Y., White, R.G. and Aglietti, G.S. (2005) An experimental characterization of the acoustic fatigue endurance of GLARE and comparison with that of CFRP. Composite Structures, 68, (4), 455-470. (doi:10.1016/j.compstruct.2004.04.011).

Xie, Zhengtong and Li, Jiachun (2005) A numerical study for turbulent flow and thermal influence over inhomogenous canopy of roughness elements. Environmental Fluid Mechanics, 5, (6), 577-597. (doi:10.1007/s10652-005-2490-z).

Xing, J.T. (2005) Advanced vibration modeling and analysis with applications in maritime engineering. In, 4th MASTRUCT General Meeting, Lisbon, Portugal, 26 - 30 Sep 2005. , 1-258.

Xing, J.T. (2005) Numerical methods solving dynamic finite element equations. Maritime Transportation and Exploitation of Ocean and Coastal Resources, IMAM 2005, Lisbom, Portugal, September 26-30, 2005, 1, 559-567.

Xing, J.T. and Jin, J. (2005) A dynamic analysis of an integrated aircraft-floating structure-water interaction system excited by the impact of an aircraft landing. The Proceedings of The 15th (2005) International Offshore and Polar Engineering Conference, (CD ROM eds Jing S. Chung et al), Seoul, Korea, June 19-24, 1, 182-189.

Xing, J.T. and Jin, J. (2005) A dynamic analysis of an integrated aircraft-floating structure-water interaction system excited by the impact of an aircraft landing. International Journal of Offshore and Polar Engineering, 15, (4), 257-263.

Xing, J.T., Jin, J. and Price, W.G. (2005) A mathematical model for a very large floating structure-water interaction system excited by the impact of an aircraft landing. In, Trends in Applications of Mathematics to Mechanics. International Symposium on Trends in Applications of Mathematics to Mechanics [STAMM'2004] Aachen, Shaker Verlag, 603-613.

Xing, J.T., Xiong, Y.P. and Price, W.G. (2005) Passive–active vibration isolation systems to produce zero or infinite dynamic modulus: theoretical and conceptual design strategies. Journal of Sound and Vibration, 286, (3), 615-636. (doi:10.1016/j.jsv.2004.10.018).

Xing, J.T., Xiong, Y.P. and Price, W.G. (2005) Power flow characteristics of a beam-water interaction system using a substructure method. In, Trends in Applications of Mathematics to Mechanics. International Symposium on Trends in Applications of Mathematics to Mechanics [STAMM'2004] Aachen, Shaker Verlag, 615-626.

Xiong, J.J., Shenoi, R.A. and Qiu, H.Y. (2005) Reliability-based minimal sample factor formulation for a corrosion damage assessment in aluminium alloy plates. The Journal of Strain Analysis for Engineering Design, 40, (8), 801-816. (doi:10.1243/030932405X31019).

Xiong, Y., Xing, J.T. and Price, W. (2005) Power flow analysis and applications to vibration and control in maritime engineering. Maritime Transportation and Exploitation of Ocean and Coastal Resources, eds C. Guedes Soares et al, IMAM 2005, Lisbom, Portugal, September 26-30, 2005, 1, 569-577.

Xiong, Y.P. and Xing, J.T. (2005) Power flow analysis and applications to ship vibration and controls. In, MASTRUCT 3rd General Meeting, Glasgow, UK, 21 - 23 Feb 2005. , 1-15.

Xiong, Y.P., Xing, J.T. and Price, W.G. (2005) Interactive power flow characteristics of an integrated equipment—nonlinear isolator—travelling flexible ship excited by sea waves. Journal of Sound and Vibration, 287, (1-2), 245-276. (doi:10.1016/j.jsv.2004.11.009).

Xiong, Y.P., Xing, J.T. and Price, W.G. (2005) A novel method for power flow design and control based on power flow mode theory. The Proceedings of The 15th (2005) International Offshore and Polar Engineering Conference, (CD ROM, eds Jing S. Chung et al), Seoul, Korea, June 19-24, 3, 146-153.

Xiong, Ye-Ping, Xing, J.T. and Price, W.G. (2005) A power flow mode theory based on a system's damping distribution and power flow design approaches. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 461, (2063), 3381-3411. (doi: 10.1098/rspa.2005.1540).

Xu, Cheng, Furukawa, Minoru, Horita, Zenji and Langdon, Terence G. (2005) Developing a superplastic forming capability in nanometals. In, Kurzydlowski, K.J. and Pakiela, Z. (eds.) Bulk and Graded Nanometals. Symposium G, European Materials Research Society, Fall Meeting 2003 Switzerland, Trans Tech, 23-30. (Solid State Phenomena 101-102).

Xu, Cheng, Furukawa, Minoru, Horita, Zenji and Langdon, Terence G. (2005) Developing high strain rate superplasticity in aluminum alloys. In, Zhong, Z.Y., Saka, H., Kim, T.H., Holm, Y.F., Han, Y.F. and Xie, X.S. (eds.) PRICM-5. 5th Pacific Rim International Conference on Advanced Materials and Processing Switzerland, Trans Tech, 2949-2954. (Materials Science Forum 475-479).

Xu, Cheng, Furukawa, Minoru, Horita, Zenji and Langdon, Terence G. (2005) The evolution of homogeneity and grain refinement during equal-channel angular pressing: a model for grain refinement in ECAP. Materials Science and Engineering: A, 398, (1-2), 66-76. (doi:10.1016/j.msea.2005.03.083).

Xu, Cheng, Furukawa, Minoru, Horita, Zenji and Langdon, Terence G. (2005) Influence of ECAP on precipitate distributions in a spray-cast aluminum alloy. Acta Materialia, 53, (3), 749-758. (doi:10.1016/j.actamat.2004.10.026).

Xu, Cheng and Langdon, Terence G. (2005) Creep and superplasticity in a spray-cast aluminum alloy processed by ECA pressing. Materials Science and Engineering: A, 410-411, 398-401. (doi:10.1016/j.msea.2005.08.072).

Yakovlev, S., Zekonyte, J., Solterbeck, C. H. and Es Souni, M. (2005) Interfacial effects on the electrical properties of multiferroic BiFeO/Pt/Si thin film heterostructures. Thin Solid Films, 493, (1-2), 24-29. (doi:10.1016/j.tsf.2005.06.020).

Yang, Y., Young, E.A., Bianchetti, M., Beduz, C., Martinez, E. and Giunchi, G. (2005) Measurement of AC losses in MgB/sub 2/ wire and bulk conductors at different temperatures. IEEE Transactions on Applied Superconductivity, 15, (2, Part 3), 2883-2886. (doi:10.1109/TASC.2005.848254).

Yool, A., Price, A.R., Marsh, R., Cox, S.J., Shepherd, J.G. and The GENIE team (2005) Earth system model optimisation using response surface modelling in the Grid-enabled GENIE framework. Geophysical Research Abstracts, 7, 9185-9185.

Yorke, Christopher Philip (2005) Direct numerical simulation of a strained and recovered channel flow with Reynolds-averaged Navier-Stokes model comparisons. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 129pp.

Zannetti, Luca and Chernyshenko, Sergei I. (2005) Vortex pair and Chaplygin cusps. European Journal of Mechanics - B/Fluids, 24, (3), 328-337. (doi:10.1016/j.euromechflu.2004.09.005).

Zaporojtchenko, V., Zekonyte, Jurgita, Wille, S., Schuermann , U. and Faupel, F. (2005) Tailoring of the PS surface with low energy ions: Relevance to growth and adhesion of noble metals. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 236, (1-4), 95-102. (doi:10.1016/j.nimb.2005.03.261).

Zekonyte, Jurgita, Zaporojtchenko, V. and Faupel, F. (2005) Investigation of the drastic change in the sputter rate of polymers at low ion fluence. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 236, (1-4), 241. (doi:10.1016/j.nimb.2005.04.043).

Zhang, X. (2005) Unsteady ground effect aerodynamics. In, World Motorsports Symposium, London, UK, 10 - 11 Nov 2005. , 1-23.

Zhang, X., Chen, X.X. and Morfey, C.L. (2005) Acoustic radiation from a semi-infinite duct with a subsonic jet. International Journal of Aeroacoustics, 4, (1-2), 169-184. (doi: 10.1260/1475472053730075).

Zhang, X., Mohan, S., Van Den-Berg, M. and William, C. (2005) Aerodynamics of a half-cylinder in ground effect. In, Rodi, Wolfgang (ed.) Engineering Turbulence Modelling and Experiments 6: ERCOFTAC International Symposium on Engineering Turbulence and Measurements - ETMM6. ERCOFTAC International Symposium on Engineering Turbulence and Measurements - ETMM6 Netherlands, Elsevier, 461-470.

Zhang, Zhige, Lam, Liza, Atkinson, John and Maul, Christian (2005) Miniature thick film position sensor for real time in situ monitoring at the contact point of automotive connectors. Measurement Science and Technology, 16, 1567-1573. (doi:10.1088/0957-0233/16/8/004).

Zhao, Y.H., Liao, X.Z., Zhu, Y.T., Horita, Z. and Langdon, T.G. (2005) Influence of stacking fault energy on nanostructure formation under high pressure torsion. Materials Science and Engineering: A, 410-411, 188-193. (doi:10.1016/j.msea.2005.08.074).

Zhilyaev, A.P., Kim, B.-K., Szpunar, J.A., Baró, M.D. and Langdon, T.G. (2005) The microstructural characteristics of ultrafine-grained nickel. Materials Science and Engineering: A, 391, (1-2), 377-389. (doi:10.1016/j.msea.2004.09.030).

Zhilyaev, A.P., Oh-ishi, K., Langdon, T.G. and McNelley, T.R. (2005) Microstructural evolution in commercial purity aluminum during high-pressure torsion. Materials Science and Engineering: A, 410-411, 277-280. (doi:10.1016/j.msea.2005.08.044).

Zhu, Yuntian T. and Langdon, Terence G. (2005) Influence of grain size on deformation mechanisms: an extension to nanocrystalline materials. Materials Science and Engineering: A, 409, (1-2), 234-242. (doi:10.1016/j.msea.2005.05.111).

Zhu, Z. and Starink, M.J. (2005) Influence of cold work and solutionising temperature on age hardening capability of Al-Mg-Mn alloys with small Cu and Si additions. In, Howe, J.M., Laughlin, D.E., Lee, J.K., Srolovitz, D.J. and Dahmen, U. (eds.) Solid-Solid Phase Transformations in Inorganic Materials 2005. Solid-to-Solid Phase Transformation in Inorganic Materials Conference , The Minerals, Metals & Materials Society, 383-390.

Zhukov, A.A, Kiziroglou, M.E., Goncharov, A.V., Boardman, R., Ghanem, M.A., Abdelsalam, M., Novosad, V., Karapetrov, G., Li, X., Fangohr, H., de Groot, C.H., Bartlett, P.N. and de Groot, P.A.J. (2005) Shape-induced anisotropy in antidot arrays from self-assembled templates. IEEE Transactions on Magnetics, 41, (10), 3598-3600. (doi: 10.1109/TMAG.2005.854734).

Zhukov, A.A., Filby, E.T., Goncharov, A.V., Ghanem, M.A., Bartlett, P.N., Boardman, R., Fangohr, H., Metlushko, V.V., Novosad, V., Karapetrov, G. and de Groot, P.A.J. (2005) Self-assembly routes towards creating superconducting and magnetic arrays. Journal of Low Temperature Physics, 139, (1), 339-349. (doi:10.1007/s10909-005-3936-x).

von Terzi, D.A., Sandberg, R.D., Sivasubramanian, J. and Fasel, H.F. (2005) High accuracy DNS and LES of high Reynolds number, supersonic base flows and passive control of the near wake. In, Proceedings of the Users Group Conference 2005. 2005 Users Group Conference Washington, DC, USA, Institute of Electrical and Electronics Engineers Computer Society, 1-9. (doi:10.1109/DOD_UGC.2005.32).