Browse by Divisions pre August 2011

Ahmed, T.M., Hudson, D.A., Temarel, P. and Ballard, E.J. (2006) Prediction of parametric roll resonance in longitudinal regular waves using a non-linear method. In, Proceedings of the 9th International Conference on Stability of Ships and Ocean Vehicles (STAB2006), Rio de Janeiro, Brazil, 25 - 29 Sep 2006. Brazil, 8pp.

Bailey, W., Young, E.A., Yang, Y. and Beduz, C. (2006) Boiling heat transfer to a liquid nitrogen pool from Ag sheathed BiPb2223 tapes carrying over-current. Superconductor Science and Technology, 19, (4), 276-279. (doi:10.1088/0953-2048/19/4/005).

Bashevoy, M.V., Jonsson, F., Chen, Y. and Zheludev, N.I. (2006) Generation of plasmon waves by electron beam impact. 2nd Annual Workshop - Advances in Nanophotonics (PhOREMOST EU NoE), Vilnius, LT, 26 - 28 Sep 2006.

Batten, W.M.J., Bahaj, A.S., Molland, A.F. and Chaplin, J.R. (2006) Hydrodynamics of marine current turbines. Renewable Energy, 32, (2), 249-256. (doi:10.1016/j.renene.2005.08.020).

Beer, Dirk de and Stoodley, Paul (2006) Microbial biofilms. In, Falkow, Stanley, Rosenberg, Eugene, Schleifer, Karl-Heinz, Stackebrandt, Erko and Dworkin, Martin (eds.) The Prokaryotes. Symbiotic Associations, Biotechnology, Applied Microbiology. , Germany, Springer, 904-938. (doi:10.1007/0-387-30741-9_28).

Bilek, J, Atkinson, J.K. and Wakeham, W.A. (2006) Thermal conductivity of molten lead-free solders. International Journal of Thermophysics, 27, (1), 92-102. (doi:10.1007/s10765-006-0035-4).

Bilek, Jaromir (2006) Sensors for thermal conductivity at high temperatures. University of Southampton, School of Engineering, Doctoral Thesis , 191pp.

Blanco, Max (2006) A newton-krylov solver with a loosely-coupled turbulence model for aerodynamic flows. University of Toronto, Department of Aerospace Sciences, Doctoral Thesis , 160pp.

Booth, J.E., Nelson, K., Harvey, T.J., Wang, L., Wood, R. J., Yamaguchi, E.S., Harrison, J.J. and Powrie, H.E.G. (2006) Discussion. The feasibility of using electrostatic monitoring to identify diesel lubricant additives and soot contamination interactions by factorial analysis. Tribology International, 39, (12), II-III. (doi:10.1016/j.triboint.2006.04.001).

Boyd, S.W., Dulieu-Barton, J.M. and Rumsey, L. (2006) Stress analysis of finger joints in pultruded GRP material. International Journal of Adhesives and Adhesion, 26, (7), 498-510. (doi:10.1016/j.ijadhadh.2005.07.003).

Brown, D., Tutty, O.R. and Rogers, E. (2006) Enhancements to non-linear multiple model adaptive control schemes. International Journal of Control, 79, (9), 1010-1025. (doi:10.1080/00207170600627485).

Cao, LingJun (2006) A z-ordering cartesian grid method and its application in flow simulation. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Castro, Ian P., Cheng, Hong and Reynolds, Ryan (2006) Turbulence over urban-type roughness: deductions from wind-tunnel measurements. Boundary-Layer Meteorology, 118, (1), 109-131. (doi: 10.1007/s10546-005-5747-7).

Chambers, A.R., Earl, J.S., Squires, C.A. and Suhot, M.A. (2006) The effect of voids on the flexural fatigue performance of unidirectional carbon fibre composites developed for wind turbine applications. International Journal of Fatigue, 28, (10), 1398-1396. (doi:10.1016/j.ijfatigue.2006.02.033).

Chambers, L.D., Walsh, F.C., Wood, R.J.K. and Stokes, K.R. (2006) Biomimetic approach to the design of the marine antifouling coatings. In, World Maritime Technology Conference. Maritime innovation - delivering global solutions. World Maritime Technology Conference (WMTC) 2006 London, UK, The Institute of Marine Engineering, Science and Technology. (Conference proceedings of the Institute of Marine Engineering, Science and Technology).

Chambers, L.D., Wood, R.J.K., Walsh, F.C. and Stokes, K.R. (2006) The effects of marine natural product extracts in a paint system. In, 13th International Congress on Marine Corrosion and Fouling, Rio de Janeiro, Brazil, 23 - 28 Jul 2006. (Submitted).

Chan, Sammie Chi Chun (2006) The attenuation of flow-induced tonal noise using plasma actuators. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 130pp.

Chandler, M., Kowalski, R.S.Z., Watkins, N.D., Briscoe, A. and New, A.M.R. (2006) Cementing techniques in hip resurfacing. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of Engineering in Medicine, 220, (2), 321-331. (doi:10.1243/09544119JEIM113).

Chen, Liming, Jiao, Zhuoan and Cox, Simon J. (2006) On the use of semantic annotations for supporting provenance in grids. In, Proceedings of Euro-Par 2006 Parallel Processing. 12th International Euro-Par Conference Berlin, Springer, 371-380. (Lecture Notes in Computer Science, 4128/2006 0302-9743). (doi:10.1007/11823285_38).

Chen, Z.-M., Djidjeli, K. and Price, W.G. (2006) Computing Lyapunov exponents based on the solution expression of the variational system. Applied Mathematics and Computation, 174, (2), 982-996. (doi:10.1016/j.amc.2005.05.016).

Chinchapatnam, P.P., Djidjeli, K and Nair, P.B. (2006) Unsymmetric and symmetric meshless schemes for the unsteady convection–diffusion equation. Computer Methods in Applied Mechanics and Engineering, 195, (19-22), 2432-2453. (doi:10.1016/j.cma.2005.05.015).

Choudhury, Arindam, Nair, Prasanth B. and Keane, Andy J. (2006) Constructing a speculative kernel machine for pattern classification. Neural Networks, 19, (1), 84-89. (doi:10.1016/j.neunet.2005.06.051).

Chung, K.H., Kim, J.W. and et al., (2006) Sound generation and radiation from rotor tip-vortex pairing phenomenon. AIAA Journal, 44, (6), 1181-1187.

Coceal, O., Thomas, T.G., Castro, I.P. and Belcher, S.E. (2006) Mean flow and turbulence statistics over groups of urban-like cubical obstacles. Boundary-Layer Meteorology, 121, (3), 491-519. (doi:10.1007/s10546-006-9076-2).

Cripps, R.M., Dulieu-Barton, J.M., Jeong, H.K., Phillips, H.J. and Shenoi, R.A. (2006) A generic methodology for post-damage decisions. Journal of Ship Production, 22, (1), 21-32.

D'Arcy, T., House, I., Kingsland, P., Spink, R., Yuceulug, M., Hudson, D. and Shenoi, R. (2006) Design of high performance craft from a human factors perspective. In, Symposium on Human Performance at Sea: Influence of Ship Motions on Biomechanics and Fatigue, Panama City, USA, 25 - 26 Apr 2006. USA,

Dasmahapatra, Srinandan, Dupplaw, David, Hu, Bo, Lewis, Paul, Shadbolt, Nigel and Lewis, Hugh (2006) Facilitating multi-disciplinary, knowledge-based support for breast cancer screening. International Journal of Healthcare Technology and Management, 7, (5), 403-420.

Doerffel, Dennis and Abu-Sharkh, Suleiman (2006) A critical review of using Peukert-equation for determining the remaining capacity of lead-acid and lithium ion batteries. Journal of Power Sources, 155, (2), 395-400. (doi:10.1016/j.jpowsour.2005.04.030).

Dong, Bo-Qing and Chen, Zhi-Min (2006) Asymptotic stability of the critical and super-critical dissipative quasi-geostrophic equation. Nonlinearity, 19, (12), 2919-2928. (doi:10.1088/0951-7715/19/12/011).

Dransfeld, S., Tatnall, A.R., Robinson, I. and Mobley, C.D. (2006) Neural network training: using non-logarithmic or logarithmic training data for the inversion of ocean colour spectra? International Journal of Remote Sensing, 27, (10), 2011-2016. (doi:10.1080/01431160500245658).

Dulieu-Barton, J.M., Emery, T.R., Quinn, S. and Cunningham, P.R. (2006) A temperature correction methodology for quantitative thermoelastic stress analysis and damage assessment. Measurement Science and Technology, 17, (6), 1627-1637. (doi:10.1088/0957-0233/17/6/047).

Eaton-Evans, J., Dulieu-Barton, J.M., Little, E and Brown, I.A. (2006) Experimental studies of NiTi self-expanding stent designs”. Journal of ASTM International, 3, (9), JAI100388 [12pp]. (doi:10.1520/JAI100388).

Eaton-Evans, J., Dulieu-Barton, J.M., Little, E. and Brown, I. (2006) Thermoelastic analysis of high pressure angioplasty balloons. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 220, (3), 425-438. (doi:10.1243/09544119H00805).

Eaton-Evans, J., Dulieu-Barton, J.M., Little, E.G. and Brown, I.A. (2006) A new approach to stress analysis of vascular devices using high resolution thermoelastic stress analysis. Applied Mechanics and Materials, 5-6, (9), 63-70.

Everitt, S., Pang, H.T., Hide, N.J., Starink, M.J. and Reed, P.A.S. (2006) A comparison of high temperature fatigue crack propagation in sub-solvus heat treated turbine disc alloys. At High Temperature Fatigue: Influences of Creep and Environment, London, UK, 05 - 06 Dec 2006. London, 2006, IOM Communications, 61-62.

Fasel, Hermann F., von Terzi, Dominic and Sandberg, Richard D. (2006) A methodology for simulation of complex turbulent flows. Journal of Applied Mechanics, 73, (3), 405-412. (doi:10.1115/1.2150231).

Fernandez, I.R., Fangohr, H. and Bhaskar, A. (2006) Normal modes of carbon nanotubes: similarities and differences with their continuum counterpart. Journal of Physics: Conference Series, (26), 131-134. (doi:10.1088/1742-6596/26/1/031).

Forrester, A.I.J., Bressloff, N.W. and Keane, A.J. (2006) Optimization using surrogate models and partially converged computational fluid dynamics simulations. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 462, (2071), 2177-2204. (doi: 10.1098/rspa.2006.1679).

Forrester, A.I.J., Keane, A.J. and Bressloff, N.W. (2006) Design and analysis of 'noisy' computer experiments. AIAA Journal, 44, (10), 2331-2339. (doi:10.2514/1.20068).

Forrester, Alexander I.J., Sobester, Andras and Keane, Andy J. (2006) Optimization with missing data. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 462, (2067), 935-945. (doi: 10.1098/rspa.2005.1608).

Frolish, M., Walker, John C., Jiao, C., Rainforth, W. and Beynon, J. (2006) Formation and structure of a subsurface layer in hot rolled aluminium alloy AA3104 transfer bar. Tribology International, 38, (11-12), 1050-1058. (doi:10.1016/j.triboint.2005.07.021).

Gao, Nong, Starink, Marco J., Furukawa, Minoru, Horita, Zenji, Xu, Cheng and Langdon, Terence G. (2006) Evolution of microstructure and precipitation in heat-treatable aluminium alloys during ECA pressing and subsequent heat treatment. In, Horita, Zenji (ed.) Nanomaterials by Severe Plastic Deformation. SPD-3: 3rd International Conference on Nanomaterials by Severe Plastic Deformation Switzerland, Trans Tech, 275-280. (Materials Science Forum 503-504).

García de Abajo, F.J., Chen, Y., Fedotov, V.A., Papasimakis, N., Schwanecke, A.S. and Zheludev, N.I. (2006) Extraordinary light transmission through quasicrystal arrays of holes in a metal film. In, SPIE Optics and Photonics 2006, San Diego, US, 13 - 17 Aug 2006.

Garry, James R.C., Loes ten Kate, Inge, Martins, Zita, Nørnberg, Per and Ehrenfreund, Pascale (2006) Analysis and survival of amino acids in Martian regolith analogs. Meteoritics & Planetary Science, 41, (3), 391-405.

Godderidge, B., Tan, M., Turnock, S.R. and Earl, C. (2006) A verification and validation study of the application of computational fluid dynamics to the modelling of lateral sloshing. Southampton, UK, University of Southampton, 158pp. (Ship Science Reports, (140) ).

Gratton, G. and Newman, S. (2006) Towards the tumble resistant microlight. Cockpit, January - June

Griffiths, G. (2006) Oceanographic equipment and sensors for the detection and measurement of pollutants. Journal of Ocean Technology, 1, (1), 36-56.

Habbab, H., Mellor, B.G. and Syngellakis, S. (2006) Post-yield characterisation of metals with significant pile-up through spherical indentations. Acta Materialia, 54, (7), 1965-1973. (doi:10.1016/j.actamat.2005.12.021).

Hetsch, T. and Rist, U. (2006) The effect of sweep on laminar separation bubbles. In, Govindarajan, R. (ed.) Fluid Mechanics and its Applications. IUTAM Symposium on Laminar-Turbulent Transition , Springer-Verlag, 395-400. (Proceedings of Sixth IUTAM Symposium on Laminar-Turbulent Transition, 78).

Hu, G.H. and Newman, S.J. (2006) A full-span free-wake model using circular-arc vortex elements and incorporating rotor trim analysis. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 220, (2), 145-163. (doi:10.1243/09544100G04704).

Huang, Taotao (2006) Quench modelling of high temperature superconductor. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 156pp.

Huang, Xun (2006) Adaptive mesh refinement for computational aeroacoustics. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 143pp.

Jarry, E. and Shenoi, R.A. (2006) Performance of butt strap joints for marine applications. International Journal of Adhesion and Adhesives, 26, (3), 162-176. (doi:10.1016/j.ijadhadh.2005.01.010).

Jones, Mark P. and Newman, Simon J. (2006) Vibration reduction of a Lynx aircraft via actively controlled trailing edge flaps. In, 32nd European Rotorcraft Forum, ERF 2006, Maastricht, the Netherlands, 12 - 14 Sep 2006. (Submitted).

Keane, A.J. (2006) Statistical improvement criteria for use in multiobjective design optimisation. AIAA Journal, 44, (4), 879-891.

Kerimbekov, Ruslan M., Rogers, E and Tutty, O.R. (2006) Report on the control algorithm. Southampton University Technical Report

Kerimbekov, Ruslan M. and Tutty, O.R. (2006) Progress report on the discrete vortex method code. Southampton University Technical Report

Krishnan, L. and Sandham, N.D. (2006) Turbulent spots in a compressible boundary layer flow. In, Govindarajan, Rama (ed.) IUTAM Symposium on Laminar-Turbulent Transition. The Netherlands, Springer, 329-334. (Fluid Mechanics and Its Applications, 78). (doi:10.1007/1-4020-4159-4_46).

Labbe, D.F.L. and Wilson, P.A. (2006) A numerical investigation of the effects of the spanwise length on the three-dimensional wake of a circular cylinder. In, Fourth Conference on Bluff Body Wakes and Vortex-Induced Vibrations, 21-24 June 2005,

Labriola, Corrado (2006) Effects of varying strain-rate on the behaviour of FRP yacht hull Structure under Slam Load Conditions. University of Southampton, School of Engineering Sciences, Masters Thesis , 149pp.

Lai, Shu and Abu-Sharkh, Suleiman (2006) Structurally Integrated Slotless PM Brushless Motor with Spiral Wound Laminations for Marine Thrusters. In, The 3rd IET International Conference on Power Electronics, Machines and Drives (PEMD), Dublin, Ireland, 04 - 06 Apr 2006. London, UK, IET5pp, 106-110.

Lai, Shu Hau (2006) Design optimisation of a slotless brushless permanent magnet DC motor with helically-wound laminations for underwater rim-driven thrusters. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Lakshmi Narasimhan, Krishnan (2006) Dynamics of turbulent spots in a compressible flow. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 184pp.

Lam, L., Swingler, J. and McBride, J.W. (2006) The influence of thermal cycling and compressive force on the resistance of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonic acid)-coated surfaces. Journal of Applied Polymer Science, 101, (4), 2445-2452. (doi:10.1002/app.23213).

Lenton, T.M., Williamson, M.S., Edwards, N.R., Marsh, R., Price, A.R., Ridgwell, A.J., Shepherd, J.G., Cox, S.J. and The GENIE Team (2006) Millennial timescale carbon cycle and climate change in an efficient Earth system model. Climate Dynamics, 26, (7-8), 687-711. (doi:10.1007/s00382-006-0109-9).

Lewis, S.G., Hudson, D.A. and Turnock, S.R. (2006) Visualisation techniques for interpreting performance of high speed craft. In, Proceedings of the 10th Numerical Towing Tank Symposium (NuTTS'06). 10th Numerical Towing Tank Symposium (NuTTS'06) Le Croisic, France, Ecole Centrale de Nantes.

Lewis, S.G., Hudson, D.A., Turnock, S.R., Blake, J.I.R. and Shenoi, R.A. (2006) Predicting the motions of high speed RIBs: a comparison of non-linear strip theory with experiments. In, Proceedings of the 5th International Conference on High Performance Marine Vehicles (HIPER '06). 5th International Conference on High Performance Marine Vehicles (HIPER '06) London, UK, WEGEMT: Royal Institution of Naval Architects, 210-224.

Lipscomb, I.P, Pinchin, H.E., Collin, R., Harris, K. and Keevil, C.W. (2006) Are surgical stainless steel wires used for intracranial implantation of PrPsc a good model of iatrogenic transmission from contaminated surgical stainless steel instruments after cleaning? Journal of Hospital Infection, 64, (4), 339-343. (doi:10.1016/j.jhin.2006.08.007).

Lipscomb, I.P., Sihota, A., Botham, M., Harris, K.L. and Keevil, C.W. (2006) Rapid method for the sensitive detection of protein contamination on surgical instruments. Journal of Hospital Infection, 62, (2), 141-148. (doi:10.1016/j.jhin.2005.07.008).

Lipscomb, I.P., Sihota, A. and Keevil, C.W. (2006) Letter to the Editor. Diathermy forceps and pencils: reservoirs for protein and prion contamination? Journal of Hospital Infection, 64, (2), 193-194. (doi:10.1016/j.jhin.2006.05.011).

Low, C.T.J., Wills, R.G.A. and Walsh, F.C. (2006) Electrodeposition of composite coatings containing nanoparticles in a metal deposit. Surface and Coatings Technology, 371-383. (doi:10.1016/j.surfcoat.2005.11.123).

Ma, Zhaokai, Smith, Malcolm G., Richards, Simon K. and Zhang, Xin (2006) Attenuation of slat trailing edge noise using acoustic liners. International Journal of Aeroacoustics, 5, (4), 311-333. (doi:10.1260/147547206779379886).

Makrodimopoulos, A. and Martin, C.M. (2006) Lower bound limit analysis of cohesive-frictional materials using second-order cone programming. International Journal for Numerical Methods in Engineering, 66, (4), 604-634. (doi:10.1002/nme.1567).

Makrodimopoulos, Athanasios (2006) Computational formulation of shakedown analysis as a conic quadratic optimization problem. Mechanics Research Communications, 33, (1), 72-83. (doi:10.1016/j.mechrescom.2004.10.014).

Markvart, T. (2006) Comment on “Efficiency limits of photovoltaic fluorescent collectors”. Applied Physics Letters, 88, (17), 176101-176102. (doi:10.1063/1.2198468).

Markvart, T. (2006) Detailed balance method for ideal single-stage fluorescent collectors. Journal of Applied Physics, 99, (026101), 1-3. (doi:10.1063/1.2160710).

Markvart, T., Abu-Sharkh, S., Arnold, R.J., Kohler, J., Li, R., Ross, J.N., Wilson, P., Steemers, K. and Yao, R. (2006) Can microgrids make a major contribution to UK energy supply. Renewable and Sustainable Energy Reviews, 10, (2), 78-127. (doi:10.1016/j.rser.2004.09.013).

Markvart, T., Fragaki, A. and Ross, J.N. (2006) PV system sizing using observed time series of solar radiation. Solar Energy, 80, (1), 46-50. (doi:10.1016/j.solener.2005.08.011).

McDonald, P.C., Jaramillo, E. and Baudouy, B., McDonald, P.C. and Baudouy, B. (eds.) (2006) Thermal design of the CFRP support struts for the spatial framework of the Herschel Space Observatory. Cryogenics, 46, (4), 298-304. (doi:10.1016/j.cryogenics.2005.12.001).

Moat, B.I., Yelland, M.J. and Molland, A.F. (2006) Quantifying the airflow distortion over merchant ships. Part II: application of the model results. Journal of Atmospheric and Oceanic Technology, 23, (3), 351-360. (doi:10.1175/JTECH1859.1).

Moat, B.I., Yelland, M.J., Pascal, R.W. and Molland, A.F. (2006) Quantifying the airflow distortion over merchant ships. Part I: validation of a CFD model. Journal of Atmospheric and Oceanic Technology, 23, (3), 341-350. (doi:10.1175/JTECH1858.1).

Molinari, M., Cox, SJ and Takeda, K (2006) Microsoft institute for high performance computing. At Fifth UK e-Science All Hands Meeting, Nottingham, UK, 18 - 21 Sep 2006. UK, 1pp.

Molinari, M., Cox, SJ and Takeda, K (2006) Proof-of-concept engineering workflow demonstrator. At Fifth UK e-Science All Hands Meeting, Nottingham, UK, 18 - 21 Sep 2006. UK, 1pp.

Nava, J.L., Sosa, E., Carreno, G., Ponce de Leon Albarran, C.A. and Oropeza, M.T. (2006) Modelling of the concentration–time relationship based on global diffusion-charge transfer parameters in a flow-by reactor with a 3D electrode. Electrochimica Acta, 51, (20), 4210-4217. (doi:10.1016/j.electacta.2005.12.002).

Nayak, A.K., Shenoi, R.A. and Moy, S.S.J. (2006) Dynamic response of composite sandwich plates subjected to initial stresses. Composites Part A: Applied Science and Manufacturing, 37, (8), 1189-1205. (doi:10.1016/j.compositesa.2005.05.034).

Nayak, A.K., Shenoi, R.A. and Moy, S.S.J. (2006) Transient response of initially stressed composite sandwich plates. Finite Elements in Design and Analysis, 42, (10), 821-836. (doi:10.1016/j.finel.2005.08.008).

Newman, S. (2006) Happiness is a consistent set of units? Measurement + Control, 39, (4), 114-117.

Newman, Simon (2006) The helicopter – efficiency or efficacy? Aircraft Engineering and Aerospace Technology: An International Journal, 78, (1), 15-19. (doi: 10.1108/17488840610639636).

Nguyen, Minh Q., Atkinson, Peter M. and Lewis, Hugh G. (2006) Superresolution mapping using a Hopfield neural network with fused images. IEEE Transactions on Geoscience and Remote Sensing, 44, (3), 736-749. (doi: 10.1109/TGRS.2005.861752).

Nicholls, K.W., Abrahamsen, E.P., Buck, J.J.H., Dodd, P.A., Goldblatt, C., Griffiths, G., Heywood, K.J., Hughes, N.E., Kaletzky, A., Lane-Serff, G.F., McPhail, S.D., Millard, N.W., Oliver, K.I.C., Perrett, J., Price, M.R., Pudsey, C.J., Saw, K., Stansfield, K., Stott, M.J., Wadhams, P., Webb, A.T. and Wilkinson, J.P. (2006) Measurements beneath an Antarctic ice shelf using an autonomous underwater vehicle. Geophysical Research Letters, 33, (8), L08612-[4pp]. (doi:10.1029/2006GL025998).

Ong, Yew-Soon, Nair, Prasanth B. and Lum, Kai Yew (2006) Max-min surrogate-assisted evolutionary algorithm for robust design. IEEE Transactions on Evolutionary Computation, 10, (4), 392-404. (doi:10.1109/TEVC.2005.859464).

Park, Jae-Hong (2006) Time domain simulation of hydroelastic response of ships in large amplitude waves. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 185pp.

Paventhan, A., Takeda, Kenji, Cox, Simon J. and Nicole, Denis A. (2006) MyCoG.NET: a multi-language CoG toolkit. Concurrency and Computation: Practice & Experience, 19, (14), 1885-1900. (doi:10.1002/cpe.1133).

Phan, T.S., Dulieu-Barton, J.M. and Temarel, P. (2006) Thermoelastic stress analysis of structures under natural vibrations. Experimental Mechanics, 46, (4), 463-472. (doi:10.1007/s11340-006-8445-6).

Ponce de Leon, C., Walsh, F.C., Pletcher, D., Browning, D.J. and Lakeman, J.B. (2006) Direct borohydride fuel cells. Journal of Power Sources, 155, (2), 172-181. (doi:10.1016/j.jpowsour.2006.01.011).

Price, A.R., Jiao, Z., Lenton, T.M., Williams, G., Valdes, P.J. and Cox, S.J. GENIE team (2006) Exploiting the Grid for collaborative ensemble studies using GENIE Earth System Models. Geophysical Research Abstracts, 8, 8643.

Price, W.G. and Chen, Y.G. (2006) A simulation of free surface waves for incompressible two-phase flows using a curvilinear level set formulation. International Journal for Numerical Methods in Fluids, 51, (3), 305-330. (doi:10.1002/fld.1126).

Reade, G.W., Ponce de Leon Albarran, C.A. and Walsh, F.C. Rolls Royce plc, P.O. Box 31, Derby DE24 8BJ, UK. (2006) Enhanced mass transport to a reticulated vitreous carbon rotating cylinder electrode using jet flow. Electrochimica Acta, 51, (13), 2728-2736. (doi:10.1016/j.electacta.2005.08.009).

Reynolds, Ryan T. (2006) Measurements of the structure of urban-type boundary layers. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 215pp.

Roberts, S.C. and Aglietti, G.S. (2006) Multifunctional power structures for spacecraft application. In, 57th International Astronautical Congress, Valencia, Spain, 02 - 06 Oct 2006.

Sachdeva, Sachin, Nair, Prasanth B. and Keane, Andy J (2006) Hybridization of stochastic reduced basis methods with polynomial chaos expansions. Probabilistic Engineering Mechanics, 21, (2), 182-192. (doi:10.1016/j.probengmech.2005.09.003).

Sachdeva, Sachin K., Nair, Prasanth B. and Keane, Andy J. (2006) Comparative study of projection schemes for stochastic finite element analysis. Computer Methods in Applied Mechanics and Engineering, 195, (19-22), 2371-2392. (doi:10.1016/j.cma.2005.05.010).

Sandberg, R.D. and Fasel, H.F. (2006) Direct numerical simulations of transitional supersonic base flows. AIAA Journal, 44, (4), 848-858.

Sandberg, Richard D. and Fasel, Hermann F. (2006) Investigation of supersonic wakes using conventional and hybrid turbulence models. AIAA Journal, 44, (9), 2071-2083. (doi:10.2514/1.20379).

Sandberg, Richard D. and Fasel, Hermann F. (2006) Numerical investigation of transitional supersonic axisymmetric wakes. Journal of Fluid Mechanics, 563, 1-41. (doi:10.1017/S0022112006000899).

Sandberg, Richard D. and Sandham, Neil D. (2006) Nonreflecting zonal characteristic boundary condition for direct numerical simulation of aerodynamic sound. AIAA Journal, 44, (2), 402-405.

Sandham, N.D., Morfey, C.L. and Hu, Z.W. (2006) Nonlinear mechanisms of sound generation in a perturbed parallel jet flow. Journal of Fluid Mechanics, 565, 1-23. (doi:10.1017/S0022112006001315).

Sandham, N.D., Morfey, C.L. and Hu, Z.W. (2006) Sound radiation from exponentially growing and decaying surface waves. Journal of Sound and Vibration, 294, 355-361. (doi:10.1016/j.jsv.2005.10.012).

Sasaki, D., Keane, A.J. and Shahpar, S. (2006) Multiobjective evolutionary optimization of a compressor stage using a grid-enabled environment. In, 44th AIAA Aerospace Sciences Meeting and Exhibit: AIAA-2006-340, Reno, Nevada, 09 - 12 Jan 2006. Reno, Nevada, USA, AIAA, 1-18.

Saydan, Deniz . (2006) Damage stability of ships as a safety criterion for optimisation tools. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 317pp.

Scanlan, James, Rao, Abhijit, Bru, Christophe, Hale, Peter and Marsh, Rob (2006) The DATUM project: a cost estimating environment for the support of aerospace design decision making. AIAA Journal of Aircraft, 43, (4), 1022-1029. (doi:10.2514/1.17362).

Scanlan, James, Tammineni, Sree, Rao, Abhijit, Keane, Andy and Reed, Philippa (2006) Representing cost information in an object oriented environment for the design of aerospace products. AIAA Journal of Aircraft (Submitted).

Schwanecke, Alexander S., Chen, Yifang, Fedotov, Vassilil A., Khardikov, Vyacheslav V., Mladyonov, Pavel L., Prosvirnin, Sergey L., Rogacheva, Alexandra V. and Zheludev, Nikolay I. (2006) Optical magnetic mirror. In, Proceedings of Quantum Electronics and Laser Science Conference (QELS). CLEO / QELS 2006 Washington, US, Optical Society of America.

Shenoi, R.A., Das, P.K., Nayak, A.K. and Blake, J.I.R. (2006) Safe design of a composite structure - a stochastic approach. Southampton, UK, University of Southampton (Submitted)

Sobester, A. and Keane, A.J. (2006) Supervised learning approach to parametric computer-aided design geometry repair. AIAA Journal, 44, (2), 282-289.

Sono, T.J., Scott, J.G., Sones, C.L., Valdivia, C.E., Mailis, S., Eason, R.W., Frey, J.G. and Danos, L. (2006) Reflection second harmonic generation on a z-cut congruent lithium niobate crystal. Physical Review B, 74, (20), 205424-[7pp]. (doi:10.1103/PhysRevB.74.205424).

Soso, M.D. and Wilson, P.A. (2006) Aerodynamics of a wing in ground effect in generic racing car wake flows. Journal Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 220, (1), 1-13. (doi: 10.1243/095440705X69632).

Sourdille, Etienne (2006) Numerical simulation and control of a fluid structure interaction for a plate in a transverse flow. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 387pp.

Starink, M.J., Cerezo, A., Yan, J.L. and Gao, N. (2006) Reply to the comments on “Room-temperature precipitation in quenched Al-Cu-Mg alloys: a model for the reaction kinetics and yield-strength development”. Philosophical Magazine Letters, 86, (4), 243-252. (doi:10.1080/09500830600678888).

Starink, M.J., Gao, N., Kamp, N., Wang, S.C., Pitcher, P.D. and Sinclair, I. (2006) Relations between microstructure, precipitation, age-formability and damage tolerance of Al-Cu-Mg-Li (Mn,Zr,Sc) alloys for age forming. Materials Science and Engineering A, 418, (1-2), 241-249. (doi:10.1016/j.msea.2005.11.023).

Starink, M.J., Wang, S.C., Gao, N., Ubhi, H.S., Xu, C. and Langdon, T.G. (2006) An EBSD study of texture and grain boundary evolution in a strongly textured aluminium alloy during ECA pressing. In, Horita, Zenji (ed.) Nanomaterials by Severe Plastic Deformation. SPD-3: 3rd International Conference on Nanomaterials by Severe Plastic Deformation Switzerland, Trans Tech, 937-942. (Materials Science Forum 503-504).

Stephen, N.G. (2006) The second spectrum of Timoshenko beam theory - Further assessment. Journal of Sound and Vibration, 292, (1-2), 372-389. (doi:10.1016/j.jsv.2005.08.003).

Stephen, N.G. (2006) Transfer matrix analysis of the elastostatics of one-dimensional repetitive structures. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 462, (2072), 2245-2270. (doi:10.1098/rspa.2006.1669).

Stephen, N.G. and Zhang, Y. (2006) Coupled tension-torsion vibration of repetitive beam-like structures. Journal of Sound and Vibration, 293, (1-2), 253-265. (doi:10.1016/j.jsv.2005.09.033).

Stephen, N.G. and Zhang, Y. (2006) Eigenanalysis and continuum modelling of pre-twisted repetitive beam-like structures. International Journal of Solids and Structures, 43, (13), 3832-3855. (doi:10.1016/j.ijsolstr.2005.05.023).

Stratmann, J.P., Wilson, P.A., Molland, A.F. and Courts, M.D. (2006) Project management of early stage warship design. The Transactions of The Royal Institution of Naval Architects, International Journal of Maritime Engineering,, 148, (A2), 1-14. (doi:10.3940/rina.ijme.2006.a2.7306).

Stratmann, Johannes Philipp (2006) Engineering management of early stage warship design. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 258pp.

Tadjouddine, M., Forth, S.A. and Keane, A.J. (2006) Adjoint differentiation of a structural dynamics solver. In, Bücker, M., Corliss, G., Hovland, P., Naumann, U. and Norris, B. (eds.) Automatic Differentiation: Applications, Theory, and Implementations. AD2004: The 4th International Conference on Automatic Differentiation , Springer, 309-319. (Lecture Notes in Computational Science & Engineering, 50).

Thornton, B., Ura, T., Nose, Y. and Turnock, S.R. (2006) Development of Zero-G Underwater Robots:Unrestricted attitude control using control moment gyros. Seisan-Kenkyu, 58, (2), 175-178.

Thornton, Blair (2006) The development of Zero-G class underwater robots: unrestricted attitude control using control moment gyros. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 141pp.

Towner, M.C., Garry, J.R.C., Lorenz, R.D., Hagermann, A., Hathi, B., Svedhem, H., Clark, B.C., Leese, M.R. and Zarneck, J.C. (2006) Physical properties of Titan’s surface at the Huygens landing site from the surface science package acoustic properties sensor (API-S). Icarus, 185, (2), 457-465. (doi:10.1016/j.icarus.2006.07.013).

Townsend, Rosemary Jane (2006) Modelling of a microfluid ultrasonic particle separator. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 261pp.

Trinidad, P., Ponce de León, C.A. and Walsh, F.C. (2006) The application of flow dispersion models to the FM01-lC laboratory filter-press reactor. Electrochimica Acta, 52, (2), 604-613. (doi:10.1016/j.electacta.2006.05.040).

Turner, Kevin and Spearing, S.M. (2006) Mechanics of direct wafer bonding. Proceedings of the Royal Society A: Mathematical Physical and Engineering Sciences, 462, (2065), 171-188. (doi:10.1098/rspa.2005.1571).

Walker, J.C., Jones, H. and Rainforth, W.M. (2006) Site specific SEM/FIB/TEM for analysis of lubricated sliding wear of aluminium alloy composites. Journal of Physics: Conference Series, 26, 327. (doi:10.1088/1742-6596/26/1/079).

Walker, S.J.I., Aglietti, G.S. and Cunningham, P.R. (2006) A study of joint damping in metal plates. In, 57th International Astronautical Congress, Valencia, ES, 02 - 06 Oct 2006.

Walker, Scott J.I. and Aglietti, Guglielmo S. (2006) Experimental investigation of tape springs folded in three dimensions. American Institute of Aeronautics and Astronautics (AIAA) Journal, 44, (1), 151-159.

Wang, S.C., Lefebvre, F., Yan, J.L., Sinclair, I. and Starink, M.J. (2006) VPPA welds of Al-2024 alloys: analysis and modelling of local microstructure and strength. Materials Science and Engineering A, 431, (1-2), 123-136. (doi:10.1016/j.msea.2006.05.120).

Wang, S.C., Starink, M.J. and Gao, N. (2006) Precipitation hardening in Al-Cu-Mg alloys revisited. Scripta Materialia, 54, (2), 287-291. (doi:10.1016/j.scriptamat.2005.09.010).

Webb, S. and Castro, Ian P. (2006) Axisymmetric jets impinging on porous walls. Experiments in Fluids, 40, (6), 951-961. (doi:10.1007/s00348-006-0131-z).

Webb, Stephen David (2006) Jet impingement on porous surfaces. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Wills, R.G.A. and Walsh, F.C. (2006) Electroplating for protection against wear, Cambridge, UK, Woodhead Publishing Limited

Xie, Zheng-Tong and Castro, Ian P. (2006) LES and RANS for turbulent flow over arrays of wall-mounted obstacles. Flow, Turbulence and Combustion, 76, (3), 291-312. (doi:10.1007/s10494-006-9018-6).

Xing, J.T., Xiong, Y.P., Tan, M. and Toyota, Makoto (2006) Vibration problem of a spherical tank containing jet propellant: numerical simulations. Southampton, UK, University of Southampton, 59pp. (Ship Science Reports, (141) ).

Yakovlev, S., Kharton, V., Naumovich, E., Zekonyte, Jurgita, Zaporojtchenko, V., Kovalevsky, A., Yaremchenko, A. and Frade, J. (2006) Defect formation and transport in La0.95Ni0.5Ti0.5O3−δ. Solid State Sciences, 8, (11), 1302-1311. (doi:10.1016/j.solidstatesciences.2006.07.010).

Yin, Yu, Shenoi, R. Ajit, Zhu, Hangbin and Xia, Lijuan (2006) Using wavelet transforms to analyze nonlinear ship rolling and heave-roll coupling. Ocean Engineering, 33, (7), 912-926. (doi:10.1016/j.oceaneng.2005.05.014).

Zhukov, A.A., Goncharov, A.V., de Groot, P.A.J., Ghanem, M.A., Bartlett, P.N., Boardman, R., Fangohr, H., Novosad, V. and Karapetrov, G. (2006) Oscillatory thickness dependence of the coercive field in magnetic three-dimensional antidot arrays. Applied Physics Letters, 88, (6), 1-4. (doi:10.1063/1.2171792).

ten Kate, Inge Loes, Garry, James R.C., Peeters, Zan, Foing, Bernard and Ehrenfreund, Pascale (2006) The effects of Martian near surface conditions on the photochemistry of amino acids. Planetary and Space Sciences, 54, (3), 296-302. (doi:10.1016/j.pss.2005.12.002).