Browse by Divisions pre August 2011

Griffiths, G. and Collins, K. (eds.) (2007) Masterclass in AUV technology for Polar science: collaborative Autosub science in extreme environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK., London, UK, Society for Underwater Technology, 146pp.

Akhtman, Jos, Furlong, Maaten, Jantapremjit, Pakpong, Palmer, Alistair, Phillips, A.B., Sharkh, Suleiman, Turnock, Stephen and Veres, Sandor (2007) SotonAUV: University of Southampton entry into the 2007 student autonomous underwater challenge - Europe. In, The 9th Unmanned Underwater Vehicle Showcase (UUVS 2007), Southampton, UK, 26 - 27 Sep 2007. Southampton, UK, 10pp.

Ang, K.C., Wood, R.J.K. and Wang, L. (2007) Characterisation of electron beam sculpted surfaces. In, 13th Materials, Surface Engineering and Bioengineering Sciences Research Groups' Postgraduate Conference, New Forest, UK, 2007.

Ang, K.C., Wood, R.J.K. and Wang, L. (2007) Metrology techniques for 3D complex surfaces produced by Surfi-Sculpt® Direct Writing process. In, Direct Writing 1st International Conference, Durham, UK, 16 - 17 Apr 2007.

Austin, T.P., Singh, M.M., Gregson, P.J. and Powell, P.M. (2007) Characterisation of fatigue crack growth and related damage mechanisms in FRP-metal hybrid laminates. Composites Science and Technology (doi:10.1016/j.compscitech.2007.11.013).

Bailey, N.J., Bevington, J.S., Lewis, H.G., Swinerd, G.G., Atkinson, P.M., Crowther, R. and Holland, D. (2007) From Buncefield to Tunguska: hazard and disaster modelling at the University of Southampton. In, 5th International Workshop on Remote Sensing Applications to Natural Hazards, Washington D.C., USA, 10 - 11 Sep 2007. Buffalo, USA, MCEER6pp. (In Press).

Ball, Andrew, Garry, James, Lorenz, Ralph and Kerzhanovich, Viktor (2007) Planetary landers and entry probes, Cambridge, UK, Cambridge University Press, 368pp.

Bilek, Jaromir, Atkinson, John and Wakeham, William (2007) Measurements of the thermal conductivity of molten lead using a new transient hot wire sensor. International Journal of Thermophysics, 28, (2), 496-505. (doi:10.1007/s10765-007-0182-2).

Bissessur, Prithiraj (2007) Unsteady aerodynamics using high-order methods. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 177pp.

Blanco, Max and Zingg, David W. (2007) Newton-Krylov algorithm with a loosely coupled turbulence model for aerodynamic flows. AIAA Journal, 45, (5), 980-987. (doi:10.2514/1.22972).

Boltryk, P.J., Hill, M., McBride, J.W., Nascè, A., Bewley, N. and Prentice, W. (2007) Non-contact surface metrology for preservation and sound recovery from mechanical sound recordings. In, JTS 2007: Audio Visual Heritage and the Digital Universe, Toronto, Canada, 28 - 30 Jun 2007.

Booth, D.P.P., Starink, M.J. and Sinclair, I. (2007) Analysis of local microstructure and hardness of 13mm gauge 2024-T351 AA friction stir welds. Materials Science and Technology, 23, 276-284.

Bose, N., Hayes, D. and Griffiths, G. (2007) Autonomous underwater vehicle operations: needs of new users. In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, 69-78.

Bouferrouk, Abdessalem (2007) A discrete vortex method analysis tool for control of flows with trapped vortices. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 254pp.

Castro, I.P. (2007) Rough-wall boundary layers: mean flow universality. Journal of Fluid Mechanics, 585, 469-485. (doi:10.1017/S0022112007006921).

Chambers, A.R., Mowlem, M.C. and Dokos, L. (2007) Evaluating impact damage in CFRP using fibre optic sensors. Composites Science and Technology, 67, (6), 1235-1242. (doi:10.1016/j.compscitech.2006.05.023).

Chambers, L.D., Walsh, F.C., Wood, R.J.K. and Stokes, K.R. (2007) Natural products as antifoulants in marine surface coatings. In, NASM 2007: Novel Applications for Surface Modifications, Southampton, UK, 18 - 20 Sep 2007.

Chambers, L.D., Wood, R.J.K., Walsh, F.C. and Stokes, K.R. (2007) Natural products for antifouling coatings. In, Marine Corrosion Forum, London, UK, 10 Oct 2007.

Cheng, H., Hayden, P., Robins, A.G. and Castro, I.P. (2007) Flow over cube arrays of different packing densities. Journal of Wind Engineering and Industrial Aerodynamics, 95, (8), 715-740. (doi:10.1016/j.jweia.2007.01.004).

Chinchapatnam, P.P., Djidjeli, K. and Nair, P.B. (2007) Domain Decomposition for Time-Dependent Problems Using Radial Based Meshless Methods. Numerical Methods for Partial Differential Equations, 23, (1), 38-59. (doi:10.1002/num.20171).

Chinchapatnam, Phani P., Djidjeli, K. and Nair, Prasanth B. (2007) Radial basis function meshless method for the steady incompressible Navier-Stokes equations. International Journal of Computer Mathematics, 84, (10), 1509-1521. (doi:10.1080/00207160701308309).

Choi, W.J., Xiong, Y.P. and Shenoi, R.A. (2007) Vibration characteristics of smart sandwich beams embedded with magnetorheological elastomer cores. In, Advancements in Marine Structures: Proceedings of the 1st MARSTRUCT International Conference, Glasgow, UK, 12-14 March 2007. MARSTRUCT 2007: 1st International Conference on Marine Structures: Advancements in Marine Structures London, UK, Taylor & Francis, 421-428.

Coceal, O., Dobre, A., Thomas, T.G. and Belcher, S.E. (2007) Structure of turbulent flow over regular arrays of cubical roughness. Journal of Fluid Mechanics, 589, 375-409. (doi:10.1017/S002211200700794X).

Coceal, Omduth, Dobre, Adrian and Thomas, T.G. (2007) Unsteady dynamics and organized structures from DNS over an idealized building canopy (In special issue: Urban Climatology ICUC6). International Journal of Climatology, 27, (14), 1943-1953. (doi:10.1002/joc.1549).

Coceal, Omduth, Thomas, T. Glyn and Belcher, Stephen E. (2007) Spatial variability of flow statistics within regular building arrays. Boundary-Layer Meteorology, 125, (3), 537-552. (doi:10.1007/s10546-007-9206-5).

Eaton-Evans, J., Dulieu-Barton, J.M., Little, E.G. and Brown, I.A. (2007) Factors influencing the suitability of thermal methods for stress analysis of NiTi shape memory alloys. Applied Mechanics and Materials, 13-14, 225-230.

Eaton-Evans, J., Dulieu-Barton, J.M., Little, E.G. and Brown, I.A. (2007) Thermoelastic stress analysis of vascular devices. At 13th International Conference on Experimental Mechanics (ICEM 13), Alexandroupolis, Greece, 01 - 06 Jul 2007. Netherlands, Springer, 5-6.

Everitt, S., Starink, M.J., Pang, H.T., Wilcock, I.M., Henderson, M.B. and Reed, P.A.S. (2007) A comparison of high temperature fatigue crack propagation in various sub-solvus heat treated turbine disc alloys. Materials Science and Technology, 23, 1419-1423.

Fairman, M.J., Price, A.R., Xue, G., Molinari, M., Nicole, D.A., Lenton, T.M., Marsh, R., Takeda, K. and Cox, S.J. (2007) Building scientific workflows for Earth system modelling with Windows Workflow Foundation. In, Shi, Yong, van Abada, Geert Dick, Dongarra, Jack and Sloot, Peter M.A. (eds.) Proceedings of the 7th International Computational Science Conference. International Conference on Computational Science: Advancing Science and Society Through Computation (ICCS 2007) Berlin, Germany, Springer, 273-280. (Lecture Notes in Computer Science 4489). (doi:10.1007/978-3-540-72588-6_46).

Forestier, J-M., Holmes, B., Barrett, S. and Lewis, A.W. (2007) Value and validation of small scale physical model tests of floating wave energy converters. In, Proceedings of the 7th European Wave and Tidal Energy Conference (EWTEC 2007). 7th European Wave and Tidal Energy Conference (EWTEC 2007) Porto, Portugal, European Wave and Tidal Energy Conference.

Forestier, Jean-Michel (2007) Evolution equation of a potential flow with a free surface and moving solid boundaries. In, 22nd International Workshop on Water Waves and Floating Bodies (IWWWFB22), Plitvice, Croatia, 15 - 18 Apr 2007. 4pp.

Gao, N., Brown, M.W., Miller, K.J. and Reed, P. A. S. (2007) An effective method to investigate short crack growth behaviour by reverse bending testing. International Journal of Fatigue, 29, 565-574.

Gao, N., Starink, M.J., Kamp, N. and Sinclair, I. (2007) Application of uniform design in optimisation of three stage ageing of Al-Cu-Mg alloys. Journal of Materials Science, 42, 4398-4405.

Griffiths, G. (2007) RRS James Cook Cruise JC009T, 01 May - 11 May 2007. Trials of the Isis Remotely Operated Vehicle. Southampton, UK, National Oceanography Centre Southampton, 42pp. (National Oceanography Centre Southampton Cruise Report, (18) ).

Griffiths, G., Bose, N., Ferguson, J. and Blidberg, D.R. (2007) Insurance for autonomous underwater vehicles. Underwater Technology, 27, (2), 43-48.

Griffiths, G., Jones, C., Ferguson, J. and Bose, N. (2007) Undersea gliders. Journal of Ocean Technology, 2, (2), 64-75.

Griffiths, G. and Trembanis, A. (2007) Eliciting expert judgement for the probability of AUV loss in contrasting operational environments. In, 15th International Symposium on Unmanned Untethered Submersible Technology (UUST 07). 15th International Symposium on Unmanned Untethered Submersible Technology (UUST07) Lee, USA, Autonomous Undersea Systems Institute, 17pp.

Griffiths, G. and Trembanis, A. (2007) Towards a risk management process for automous underwater vehicles. In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, 103-118.

Griffiths, Gwyn, Merckelbach, Lucas and Smeed, David (2007) On the performance of three deep-diving underwater gliders. In, OCEANS 2007 - Europe. Oceans 2007 - Europe Richardson, USA, Institute of Electrical and Electronics Engineers, 1-5. (doi:10.1109/OCEANSE.2007.4302200).

Jiang, Liudi, Pandraud, G., French, P.J., Spearing, S.Mark and Kraft, Michael (2007) A novel method for nanoprecision alignment in wafer bonding applications. Journal of Micromechanics and Microengineering, (Special Issue: )

Kamp, N., Gao, N., Starink, M.J., Parry, M.R. and Sinclair, I. (2007) Analytical modelling of the influence of local mixed mode displacements on roughness induced crack closure. International Journal of Fatigue, 29, (5), 897-908. (doi:10.1016/j.ijfatigue.2006.08.004).

Kamp, N., Gao, N., Starink, M.J. and Sinclair, I. (2007) Influence of grain structure and slip planarity on fatigue crack growth in low alloying artificially aged 2xxx aluminium alloys. International Journal of Fatigue, 29, (5), 869-878. (doi:10.1016/j.ijfatigue.2006.08.005).

Keane, A.J. and Scanlan, J.P. (2007) Design search and optimization in aerospace engineering. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 365, (1859), 2501-2529. (doi:10.1098/rsta.2007.2019).

Kittidachachan, P., Meyer, T.J.J., Danos, L. and Markvart, T. (2007) Characterisation of fluorescent collectors in terms of fluorescence collection efficiency. In, Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 03 - 07 Sep 2007. Milan, Italy, European photovoltaic Solar Energy Conference5pp, 301-305.

Lenton, T.M., Marsh, R., Price, A.R., Lunt, D.J., Aksenov, Y., Annan, J.D., Cooper-Chadwick, T., Cox, S.J., Edwards, N.R., Goswami, S., Hargreaves, J.C., Harris, P.P., Jiao, Z., Livina, V.N., Payne, A.J., Rutt, I.C., Shepherd, J.G., Valdes, P.J., Williams, G., Williamson, M.S. and Yool, A. (2007) Effects of atmospheric dynamics and ocean resolution on bi-stability of the thermohaline circulation examined using the Grid ENabled Integrated Earth system modelling (GENIE) framework. Climate Dynamics, 29, (6), 591-613. (doi:10.1007/s00382-007-0254-9).

Li, Yong, Smith, Malcolm G., Zhang, Xin and Molin, Nicolas (2007) Noise sources control of an aircraft landing gear. In, 13th AIAA/CEAS Aeroacoustics Conference (28th AIAA Aeroacoustics Conference), Rome, Italy, 21 - 23 May 2007.

Lipscomb, I.P., Pinchin, H.E., Collin, R. and Keevil, C.W. (2007) Effect of drying time, ambient temperature and pre-soaks on prion-infected tissue contamination levels on surgical stainless steel: concerns over prolonged transportation of instruments from theatre to central sterile service departments. Journal of Hospital Infection, 65, (1), 72-77. (doi:10.1016/j.jhin.2006.09.025).

Luo, J. and Veres, S.M. (2007) Frequency domain iterative feedforward/feedback tuning for MIMO ANVC. In, 9th IFAC Workshop "Adaptation and Learning in Control and Signal Processing" (ALCOSP'07), St Petersburg, Russia, 29 - 31 Aug 2007. 6pp.

Makrodimopoulos, A. and Martin, C.M. (2007) Upper bound limit analysis using simplex strain elements and second-order cone programming. International Journal for Numerical and Analytical Methods in Geomechanics, 31, (6), 835-865. (doi:10.1002/nag.567).

McBride, J.W., Boltryk, P.J. and Zhao, Z. (2007) The relationship between surface incline and con-focal chromatic aberration sensor response. In, Fotakis, Costas, Pezzati, Luca and Salimbeni, Renzo (eds.) O3A: Optics for Arts, Architecture, and Archaeology. O3A: Optics for Arts, Architecture, and Archaelology Bellingham, USA, Society of Photo-Optical Instrumentation Engineers, 6618F-[10pp]. (Proceedings of SPIE, 6618). (doi:10.1117/12.726189).

McBride, J.W. and Lam, Liza (2007) A review of conducting polymers in electrical contact applications. In, International Conference of Polymeric Materials in Power Engineering (ICPMPE), Bangalore, India, 04 - 06 Oct 2007. 9pp.

McPhail, S. (2007) Autosub operations in the Arctic and the Antarctic. In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV technology for Polar science: collaborative Autosub science in extreme environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, 27-38.

Nishino, Takafumi (2007) Dynamics and stability of flow past a circular cylinder in ground effect. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 127pp.

Parson, L. and Edwards, R. (2007) Political/economic drivers: potential for AUV technologies in United Nations Convention on the Law of the Sea (UNCLOS). In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, p.143.

Pattenden, R.J., Bressloff, N.W., Turnock, S.R. and Zhang, X. (2007) Unsteady simulations of the flow around a short surface-mounted cylinder. International Journal for Numerical Methods in Fluids, 53, (6), 895-914. (doi:10.1002/fld.1309).

Paventhan, Arumugam (2007) Grid approaches to data-driven scientific and engineering workflows. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 132pp.

Pebody, M. (2007) Autonomy and collision avoidance. In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, 89-96.

Ponce de Leon, C.A., Walsh, F.C., Rose, A., Lakeman, J.B., Browning, D.J. and Reeve, R.W. (2007) A direct borohydride – acid peroxide fuel cell. Journal of Power Sources, 164, (2), 441-448. (doi:10.1016/j.jpowsour.2006.10.069).

Price, A.R., Xue, G., Yool, A., Lunt, D.J., Valdes, P.J., Lenton, T.M., Wason, J.L., Pound, G.E., Cox, S.J. and GENIE team, The (2007) Optimisation of integrated earth system model components using grid-enabled data management and computation. Concurrency and Computation: Practice and Experience, 19, (2), 153-165. (doi:10.1002/cpe.1046).

Reynolds, R.T., Hayden, P., Castro, I.P. and Robins, A.G. (2007) Spanwise variations in nominally two-dimensional rough-wall boundary layers. Experiments in Fluids, 42, (2), 311-320. (doi:10.1007/s00348-006-0243-5).

Sandberg, R.D., Sandham, N.D. and Joseph, P.F. (2007) Direct numerical simulations of trailing edge noise generated by boundary-layer instabilities. Journal of Sound and Vibration, 304, (3-5), 677-690. (doi:10.1016/j.jsv.2007.03.011).

Sharkh, Suleiman M.A. and Mohammad, Mohammad T. (2007) Axial field permanent magnet DC motor with powder iron armature. IEEE Transactions on Energy Conversion, 22, (3), 608-613. (doi:10.1109/TEC.2007.895870).

Siegert, M.J., Behar, A., Bentley, M., Blake, D., Christoffersen, P., Cockell, C., Corr, H., Cullen, D.C., Edwards, H., Ellery, A., Ellis-Evans, C., Griffiths, G., Hindmarsh, R., Hodgson, D.A., King, E., Lamb, H., Lane, L., Makinson, K., Mowlem, M., Parnell, J., Pearce, D.A., Priscu, J., Rivera, A., Sephton, M.A., Sims, M.R., Smith, A.R., Tranter, M., Wadham, J.L., Wilson, G., Woodward, J. and Lake Ellsworth Consortium (2007) Exploration of Ellsworth Subglacial Lake: a concept paper on the development, organisation and execution of an experiment to explore, measure and sample the environment of a West Antarctic subglacial lake. Reviews in Environmental Science and Biotechnology, 6, (1-3), 161-179. (doi:10.1007/s11157-006-9109-9).

Simons, Ian A and Modha, Ajay N (2007) Technical note gyroscopic feathering moments and the 'Bell stabilizer bar' on helicopter rotors. Journal of the American Helicopter Society, 52, (1), 69-74.

Squires, C.A., Chambers, A.R. and Netting, K.H. (2007) Understanding the factors affecting the compressive testing of carbon fibre composites. Composites Part B: Engineering, 38, (4), 481-487. (doi; 10.1016/j.compositesb.2006.08.002).

Squires, Charlene A., Netting, Keith H. and Chambers, Alan R. (2007) Understanding the factors affecting the compressive testing of unidirectional carbon fibre composites. Composites Part B: Engineering, 38, (4), 481-487. (doi:10.1016/j.compositesb.2006.08.002).

Starink, M.J. (2007) Activation energy determination for linear heating experiments: deviations due to the low temperature end of the temperature integral. Journal of Materials Science, 42, 483-489. (doi: 10.1007/s10853-006-1067-7).

Stevenson, P. (2007) Launch and recovery of autonomous underwater vehicles in Polar regions. In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, 79-88.

Stewart, I.J., Chambers, A.R. and Gordon, T. (2007) The cohesive mechanical properties of a toughened epoxy adhesive as a function of cure level. International Journal of Adhesion and Adhesives, 27, (4), 277-287. (doi:10.1016/j.ijadhadh.2006.05.003).

Suzuki, H., Riggs, H.R., Fujikubo, M., Shugar, T.A., Seto, H., Yasuzawa, Y., Bhattacharya, B., Hudson, D.A. and Shin, H. (2007) Very large floating structures. In, Proceedings of the ASME 26th International Conference on Offshore Mechanics and Arctic Engineering Volume 2: Structures, Safety and Reliability; Petroleum Technology Symposium. 26th International Conference on Offshore Mechanics and Arctic Engineering (OMAE2007) Mexico City, MX, American Society of Mechanical Engineers, 597-608. (doi:10.1115/OMAE2007-29758).

Tietje-Girault, J., Ponce de León, C.A. and Walsh, F.C (2007) Electrochemically deposited polypyrrole films and their characterization. Surface and Coating Technology, 201, (12), 6025-6034. (doi:10.1016/j.surfcoat.2006.11.009).

Townsend, R.J., Hill, M. and Harris, N.R. (2007) Modelling for the robust design of layered resonators for ultrasonic particle manipulation. In, International Congress on Ultrasonics (2007 ICU Vienna), Vienna, Austria, 09 - 12 Apr 2007.

Veres, S.M. and Aron, G. (2007) Learning and adaptation in physical agents. In, 9th IFAC Workshop "Adaptation and Learning in Control and Signal Processing" (ALCOSP'07), St Petersburg, Russia, 29 - 31 Aug 2007. 6pp.

Vithana, Sameera J. (2007) The numerical study of 3-dimensional laminar hypersonic blunt-fin interactions. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 246pp.

Wakeham, W.A., Assael, M.A., Atkinson, J.K., Bilek, J., Fareleira, J.M.N.A., Fitt, A.D., Goodwin, A.R.H. and Oliveira, C.M.B.P. (2007) Thermophysical property measurements: the journey from accuracy to fitness for purpose. International Journal of Thermophysics, 28, (2), 372-416. (doi:10.1007/s10765-007-0189-8).

Walker, J.C., Ross, I.M., Rainforth, W.M. and Lieblich, M. (2007) TEM characterisation of near surface deformation resulting from lubricated sliding wear of aluminium alloy and composites. Wear, 263, (1-6), 707-718. (doi:10.1016/j.wear.2006.12.043).

Wang, Wenjing, Li, Qiang and Barton, Janice (2007) Experimental study of high temperature mechanical and fatigue behaviours of sicp_a356 composites for brake disc. In, ECCOMAS Thematic Conference on Mechanical Response of Composites, Porto, Portugal, 12 - 14 Sep 2007. Porto, Portugal, ECCOMAS9pp.

Wells, Andrew K. (2007) Slat aerodynamics and aeroacoustics with flow control. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 192pp.

Xing, Jing Tang (2007) Natural vibration of two-dimensional slender structure-water interaction systems subject to Sommerfeld radiation condition. Journal of Sound and Vibration, 308, (1-2), 67-79. (doi:10.1016/j.jsv.2007.07.009).

Xiong, Y.P., Xing, J.T. and Tan, M. (2007) Transient dynamic responses of an internal liquid-LNG tank-sea water interaction system excited by waves and earthquake loads. In, Fourteenth International Congress on Sound & Vibration (ICSV14), Cairns, Australia, 09 - 12 Jul 2007. Cairns, Australia, International Institute of Acoustics and Vibration8pp, 1-8.

Yunus, E.M, McBride, J.W. and Spearing, S.M. (2007) The relationship between contact resistance and contact force on Au coated carbon nanotube surfaces. In, Proceedings of The 53rd IEEE Holm Conference on Electrical Contacts, 2007. The 53rd IEEE Holm Conference on Electrical Contacts USA, Institute of Electrical and Electronics Engineers, 167-174. (doi:10.1109/HOLM.2007.4318212).

Zaporojtchenko, V., Zekonyte, Jurgita and Faupel, F. (2007) Effects of ion beam treatment on atomic and macroscopic adhesion of copper to different polymer materials. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 265, (1), 139-145. (doi:10.1016/j.nimb.2007.08.040).

van den Berg, Martinus Anthoon (2007) Aerodynamic interaction of an inverted wing with a rotating wheel. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 274pp.