Items where Subject is "T Technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
[tool] Add To Shelf...
Number of items at this level: 544.

Launder, B.E. and Sandham, N.D. (eds.) (2002) Closure strategies for turbulent and transitional flows, Cambridge, UK, Cambridge University Press

Abdolvand, A., Graener, H., Podlipensky, A., Seifert, G. and Kazansky, P.G. (2005) Novel technique for fine structuring in glass containing silver nanoparticles. In, The Conference on Lasers and Electro-Optics (CLEO) and the Quantum Electronics and Laser Science Conference (QELS) (CLEO/QELS 2005), Baltimore, USA, 22 - 27 May 2005.

Abdolvand, A., Graener, H., Podlipensky, A., Seifert, G., Kazansky, P.G. and Deparis, O. (2005) Refractive index engineering in glass containing spherical silver nanoparticles using dc electric field. In, The European Conference on Lasers and Electro-Optics and the International Quantum Electronics Conference (CLEO/Europe-IQEC) 2005, Munich, Germany, 12 - 17 Jun 2005.

Abi-Esber, L., El-Fadel, M., Nuwayhid, I. and Saliba, N. (2007) The effect of different ventilation modes on in-vehicle carbon monoxide exposure. Atmospheric Environment, 41, (17), 3644-3657. (doi:10.1016/j.atmosenv.2006.12.036).

Abu Sharkh, S., Griffiths, G. and Webb, A.T. (2002) Power sources for unmanned underwater vehicles. In, Griffiths, Gwyn (ed.) Technology and applications of autonomous underwater vehicles. London, UK, Taylor & Francis, 19-35.

Adikan, F.R.M., Gawith, C.B.E., Smith, P.G.R., Sparrow, I.J.G., Emmerson, G.D., Riziotis, C. and Ahmad, H. (2006) Design and demonstration of direct UV-written small angle X couplers in silica-on-silicon for broadband operation. Applied Optics, 45, (24), 6113-6118.

Afferante, L. and Ciavarella, M. (2004) Instability of thermoelastic contact for two half-planes sliding out-of-plane with contact resistance and frictional heating. Journal of the Mechanics and Physics of Solids, 52, (7), 1527-1547. (doi:10.1016/j.jmps.2004.01.003).

Afferante, L. and Ciavarella, M. (2004) The thermoelastic Aldo contact model with frictional heating. Journal of the Mechanics and Physics of Solids, 52, (3), 617-640. (doi:10.1016/S0022-5096(03)00116-9).

Afferante, L., Ciavarella, M., Decuzzi, P. and Demelio, G. (2003) Transient analysis of frictionally excited thermoelastic instability in multi-disk clutches and brakes. Wear, 254, (1-2), 136-146. (doi:10.1016/S0043-1648(02)00306-X).

Afferante, L., Ciavarella, M. and Demelio, G. (2004) A re-examination of rolling contact fatigue experiments by Clayton and Su with suggestions for surface durability calculations. Wear, 256, (3-4), 329-334. (doi:10.1016/S0043-1648(03)00408-3).

Aglietti, G.S. and Cunningham, P.R. (2002) Is a simple support really that simple. Journal of Sound and Vibration, 257, (2), 321-335. (doi:10.1006/jsvi.2002.5061).

Aglietti, G.S., Langley, R.S., Rogers, E. and Gabriel, S.B. (2002) Model verification for active control of microvibrations. In, Control Applications, 2002. Proceedings of the 2002 International Conference on. 2002 International Conference on Control Applications USA, Institute of Electrical and Electronics Engineers, 465-470. (doi:10.1109/CCA.2002.1040230).

Aglietti, G.S., Stoustrup, J., Langley, R.S., Rogers, E. and Gabriel, S.B. (2002) Active control of microvibrations. In, Tokhi, M.O. and Veres, S.M. (eds.) Active sound and vibration control: theory and applications. , Institution of Electrical Engineers, 241-274.

Ahmed, T.M., Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2003) Elimination of irregular frequencies in three-dimensional seakeeping predictions. In, NAV 2003: International conference on on ship and shipping research, Palermo, Italy, 24 - 27 Jun 2003. Italy, Cetena4pp.

Al-Mosawi, M.K., Spiller, D.M., Beduz, C., Yang, Y. and Ogborne, D.M. (1995) Preparation and characterisation of TL2Ba2Ca2Cu3Oy Superconducting Tapes. In, Applied Superconductivity 1995. Proceedings of EUCAS 1995, the Second European Conference on Applied Superconductivity. Proceedings of 2nd European Conference on Applied Superconductivity Bristol, UK, Institute of Physics, 491-494. (Institute of Physics Conference series).

Amezcua-Correa, A., Peacock, A.C., Yang, J., Sazio, P.J.A. and Howdle, S.M. (2008) Loss measurements of microstructured optical fibres with metal-nanoparticle inclusions. Electronics Letters, 44, (13), 795-796. (doi:10.1049/el:20080545).

Amezcua-Correa, R., Broderick, N.G., Petrovich, M.N. and Richardson, D.J. (2006) Designing hollow-core photonic bandgap fibres free of surface modes. In, Rank Prize Funds: Metamaterials in Nature and Technology Meeting, Lake Windermere, UK, 21 - 24 Aug 2006. , 1 pp.

Anthony, D.K., Sexton, C.J., Charlston, W.B., Keane, A.J., Lewis, S.M. and Please, C.P. (2003) An efficient experiment methodology to investigate product design: an acoustic sounder case study. In, Proceedings of the International Conference on Managing Innovative Manufacturing (MIM2003), Aalborg, Denmark, 22 - 23 Sep 2003.

Anwar, A.A. and Bahaj, A.S. (2003) Student project allocation using integer programming. IEEE Transactions on Education, 46, (3), 359-367. (doi:10.1109/TE.2003.811038).

Baggett, J.C., Petrovich, M.N., Hayes, J.R., Finazzi, V., Poletti, F., Amezcua, R., Broderick, N.G.R., Richardson, D.J., Monro, T.M., Salter, P.L., Proudley, G. and O'Driscoll, E.J. (2005) Microstructured fibers for high power applications. In, SPIE Optics EasT: Nanophotonics for Communication: Materials and Devices II, Boston, USA, 23 - 26 Oct 2005. , 15pp.

Bah, M. T., Keane, A. J. and Bhaskar, A. (2001) Effects of Uncertainty in Root Fixity on Turbine Blade Free Vibration. In, Bathe, K.J. (ed.) Computational fluid and solid mechanics: Proceedings of the first MIT conference on computational fluid and solid mechanics. first MIT Conference on Computational Fluid and Solid Mechanics USA, Elsevier Science. (2088).

Bah, M.T., Bhaskar, A. and Keane, A.J. (2002) Model-order reduction and pass-band based calculations for disordered periodic structures. Journal of Sound and Vibration, 256, (4), 605-627. (doi:10.1006/jsvi.2002.5011).

Bahaj, A. S., James, P. A. B. and Jentsch, M. F. (2007) Photovoltaics: added value of architectural integration. Proceedings of ICE: Energy, 160, (2), 59-69. (doi:10.1680/ener.2007.160.2.59).

Bahaj, A.S. (2005) The potential of harnessing electrical energy from marine currents. In, Imbabi, M. and Mitchell, P. (eds.) Proceedings of the World Renewable Energy Congress 2005. World Renewable Energy Congress (WREC 2005) , Elsevier Science, 257-264..

Bahaj, A.S. (2006) Simulation of extraction of tidal energy within a 2-D coastal finite element numerical model. In, Proceedings World Renewable Energy Congress (WREC-IX), Florence, 19-25 August 2006, Florence, Itlay, 19 - 25 Aug 2006.

Bahaj, A.S., Braid, R.M. and James, P.A.B. (2002) Post installation optimisation of a building integrated PV system at Southampton University. In, 29th IEEE Photovoltaic Specialist Conference. 29th IEEE PV Specialist Conference , IEEE, 1504-1507.

Bahaj, A.S. and James, P.A.B. (2002) Alternative approaches to achieving PV connector reliability: A comparative study of accelerated lifetime testing. In, Proceedings PV in Europe - PV Technology to Energy Solutions Conference and Exhibition, Rome, Italy, 07 - 11 Oct 2002. , 621-624.

Bahaj, A.S. and James, P.A.B. (2004) Inverter operating voltage selection for optimum energy yield: Do predictions match reality? In, Proceedings of the 19th European Solar Energy Conference and Exhibition, Paris, France, 07 - 11 Jun 2004.

Bahaj, A.S. and James, P.A.B. (2004) Photovoltaic atrium on a new administration and student services building - University of Southampton. In, Proceedings of the 19th European Solar Energy Conference and Exhibition, Paris, France, 07 - 11 Jun 2004.

Bahaj, A.S. and James, P.A.B. (2004) Multiple string inverters for PV systems < 5kwp: When is this justified? In, Proceedings of the 8th World Renewable Energy Congress (WREC VIII). World Renewable Energy Congress (WREC-VIII) , Elsevier Science.

Bahaj, A.S., James, P.A.B. and Jentsch, M.F. (2006) A critical appraisal of the added value of BiPV in atria. In, Proceedings 2nd International Conference of Renewable Energy in Maritime Island Climates (REMIC 2). , REMIC, 273-278.

Bahaj, A.S., James, P.A.B. and Jentsch, M.F. (2006) Sustainable refurbishment: quantifying the impact of facade changes in multi-storey, multi-occupancy buildings. In, World Renewable Energy Congress 2006. World Renewable Energy Congress (WREC-IX) , Elsevier Science.

Bahaj, A.S., James, P.A.B. and Mueller, H.F.O (2004) Modern and traditional solar control options for an office in Athens: predicted performance comparisons. In, Proceedings of the 1st Symposium on Technological Development in Daylight Applications, Athens, Greece, 26 - 27 Feb 2004. , 16-19.

Bahaj, A.S., James, P.A.B. and Myers, L.E. (2006) Economics of future energy systems. In, Proceedings of the 8th World Renewable Energy Congress (WREC VIII). World Renewable Energy Congress (WREC-VIII) , Elsevier Science.

Bahaj, A.S. and Myers, L.E. (2001) Cavitation prediction in operating marine current turbines. In, Proceedings of Renewable Energy in Maritime Island Climates. Renewable Energy in Maritime Island Climates UK, The Solar Energy Society, 222-229. (C76).

Baig, M.F. and Chernyshenko, S.I. (2002) Organised structures in near-wall two-dimensional turbulence. In, Euromech 9th European Turbulence Conference, Southampton, UK, 02 - 05 Jul 2002.

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (2001) Comparisons between theory and experiment in a seakeeping validation study. Transactions of the Royal Institution of Naval Architects, 143, 44-77.

Banks, C.J. (2004) Water quality improvements by biological treatment: how leachate stress modifies the population dynamics of Asellus aquaticus and Gammarus pulex. In, Proceedings of the 2nd IWA International Young Researcher Conference, Wageningen, Holland, 23 - 24 Apr 2004. IWA368pp.

Banks, C.J. (2004) The use of synthetic sewage for laboratory purposes. In, IWA Young Researchers' conference 2004, Southampton, UK, 23 - 24 Apr 2004. IWA368pp.

Banks, C.J., Abdrashitova, S.A., Pak, L.N. and Koloskov, G.B. (2002) Potential for use of bioponds for treatment of wastewater in conditions of extreme continental climates. In, Proceedings of International Environmental Forum on problems of sustainable development of the Ili-Balkhash basin "Balkhash 2000", Almaty, Kazakhstan,

Banks, C.J., Abdrashitova, S.A. and Torrella, F. (2002) Die-off of faecal organisms in an extreme climate waste stabilisation pond with over winter storage. In, In Proceedings of 5th International IWA Conference on Waste Stabilization Ponds, Auckland, New Zealand, 02 - 05 Apr 2002.

Banks, C.J. and Pak, L.N. (2001) An evaluation of waste stabilisation ponds for extreme continental climates: the design of laboratory and pilot scale trials. Izvestiya Akademii Nauk, Academy of Sciences of Kazakhstan, Biological Series 6, 6, 20-30.

Bashevoy, M.V., Fedotov, V.A. and Zheludev, N.I. (2006) The ultimate departure from geometrical optics: vortex optical field around plasmonic nanoparticle. In, QEP-17 at Photon06, Manchester, UK, 04 - 07 Sep 2006.

Bashevoy, M.V., Jonsson, F., Chen, Y. and Zheludev, N.I. (2007) Hyperspectral imaging of plasmons with nanoscale resolution. In, Surface Plasmon Photonics 3, Dijon, France, 17 - 22 Jun 2007.

Bashevoy, M.V., Jonsson, F., Krasavin, A.V., Zheludev, N.I., Chen, Y. and Stockman, M.I. (2006) Generation of travelling surface plasmon waves by free-electron impact. In, QEP-17 at Photon06, Manchester, UK, 04 - 07 Sep 2006.

Batten, W.M.J. and Bahaj, A.S. (2006) CFD simulation of a small farm of horizontal axis marine current turbines. In, Sayigh, A.A.M. (ed.) World Renewable Energy Congress 2006. World Renewable Energy Congress (WREC-IX) , Elsevier Science.

Batten, W.M.J. and Bahaj, A.S. (2008) Comparing energy yields from fixed and yawing horizontal axis marine current turbines in the English channel. In, Proceedings of the 27th International Conference on Offshore Mechanics and Arctic Engineering OMAE 2008, Estoril, Portugal, 15 - 20 Jun 2008.

Batten, W.M.J., Bahaj, A.S. and Blunden, L. (2006) Development of a methodology for CFD simulations of farms of marine current turbines. In, Renewable energy in maritime island climates : REMIC 2. 2nd International Conference of Renewable Energy in Maritime Island Climates , The Solar Energy Society, 157-162.

Batten, W.M.J., Bahaj, A.S., Molland, S., Blunden, F. and Chaplin, J.R. (2006) Yawed performance of horizontal axis turbines in marine currents. International solar energy society, 151-156.

Bazoune, A., Khulief, Y.A. and Stephen, N.G., Stephen, N.G. (ed.) (2003) Shape functions of three-dimensional Timoshenko beam element. Journal of Sound and Vibration, 259, (2), 473-480. (doi:10.1006/jsvi.2002.5122).

Beaven, Richard P. (2008) Review of responses to a landfill modelling Challenge. Proceedings of the ICE - Waste and Resource Management, 161, (4), 155-166. (doi:10.1680/warm.2008.161.4.155).

Bedford, G.M., Vitanov, V.I. and Voutchkov, I.I. (2001) On the thermo-mechanical events during friction surfacing of high speed steels. Surface and Coatings Technology, 141, (1), 34-39. (doi:10.1016/S0257-8972(01)01129-X).

Beecroft, M.E., McDonald, M., Lyons, G.D and Bell, M.C (2006) FUTURES: Future Urban Technologies: Undertaking Research to Enhance Sustainability. In, 13th World Congress on Intelligent Transport Systems and Services, London, UK, 08 - 12 Oct 2006.

Belcher, Brian and Schreckenberg, Kathrin (2007) Commercialisation of non-timber forest products: A reality check. Development Policy Review, 25, (3), 355-377. (doi:10.1111/j.1467-7679.2007.00374.x).

Bello, J.O. and Wood, R.J.K. (2003) Grooving micro-abrasion of polyamide 11 coated carbon steel tubulars for downhole application. Wear, 255, (7-12), 1157-1167. (doi:10.1016/S0043-1648(03)00226-6).

Berrios, M., Siles, J., Martin, M.A. and Martin, M. (2007) A kinetic study of the esterification of free fatty acids (FFA) in sunflower oil. Fuel, 86, (15), 2383-2388. (doi:10.1016/j.fuel.2007.02.002).

Bhaskar, A., Sahu, S.S. and Nakra, B.C. (2001) Approximations and reanalysis over a parameter interval for dynamic design. Journal of Sound and Vibration, 248, (1), 178-186. (doi:10.1006/jsvi.2001.3686).

Bianchetti, M., Al-Mosawi, M. K., Yang, Y., Beduz, C. and Guinchi, G. (2005) A closed neon liquefier system for testing superconducting devices. In, Cryogenic Engineering Conference and the International Cryogenic Materials Conference, Colorado, USA, 29 Aug - 02 Sep 2005. , 1-4.

Birtwell, S., Galitonov, G., Whitton, A., Morgan, H. and Zheludev, N. (2006) Diffraction bar-codes as high capacity optical microtags for chemical and biological applications. In, QEP-17 at Photon06, Manchester, UK, 04 - 07 Sep 2006.

Bissessuer, R., Chen, X. and Zhang, X. (2004) Numerical investigation of subsonic 2D/3D cavity flows, American Institute of Aeronautics and Astronautics

Blainey, S. (2009) Modelling local rail demand in South Wales. In, 41st Annual Conference of the Universities' Transport Study Group, London, United Kingdom, Jan 2009.

Bloor, M.C and Banks, C.J. (2003) Assessment of the acute and chronic toxicity of leachate to two aquatic invertebrates, and possible toxicity reduction by reed bed treatment. In, 4th International Symposium on Waste Treatment Technologies (Thermal, Non-Thermal and Gas Clean-up) Conference, Sheffield, UK,

Bloor, M.C. and Banks, C.J. (2006) Acute and sub-lethal toxicity of landfill leachate towards two aquatic macro-invertebrates: demonstrating the remediation potential of aerobic digestion. Hydrobiologia, 556, (1), 387-397. (doi:10.1007/s10750-005-1201-6).

Blunden, L. and Bahaj, A.S. (2005) A high resolution model of the English Channel for tidal stream resource assessment. In, Proceedings of the 6th European Wave & Tidal Energy Conference. 6th European Wave & Tidal Energy Conference , EWTEC, 51-58.

Bookey, Henry T., Dasgupta, Sonali, Bezawada, Nagaraju, Pal, Bishnu P., Sysoliatin, Alexey, McCarthy, John E., Salganskii, Mikhail, Khopin, Vladimir and Kar, Ajoy K. (2009) Experimental demonstration of spectral broadening in an all-silica Bragg fiber. Optics Express, 17, (19), 17130-17135. (doi:10.1364/OE.17.017130).

Borja, R., Rincón, B., Raposo, F., Domínguez, J.R., Millán, F. and Martín, A. (2004) Mesophilic anaerobic digestion in a fluidised-bed reactor of wastewater from the production of protein isolates from chickpea flour. Process Biochemistry, 39, (12), 1913-1921. (doi:10.1016/j.procbio.2003.09.022).

Boselli, J., Gregson, P.J. and Sinclair, I. (2004) Quantification of particle distribution effects on fatigue in an Al-SiCp composite. Materials Science And Engineering A, 379, (1-2), 72-82. (doi:10.1016/j.msea.2003.11.043).

Brackstone, M.A. and McDonald, M. (2001) Driver behaviour studies in the motorway operations platform grant. In, Proceedings of 1st International Driver Symposium on Human Factors in Driver Assessment, Training and Vehicle Design, Aspen, USA, 14 - 17 Aug 2001. , 87-92.

Brambilla, G., Fotiadi, A.A., Slattery, S.A. and Nikogosyan, D.N. (2006) Two-photon photochemical long-period grating fabrication in pure-fused-silica photonic crystal fiber. Optics Letters, 31, (18), 2675-2677.

Brambilla, G. and Renna, F. (2009) Towards a sub-10nm optical fibre light source. In, 22nd International Microprocesses and Nanotechnology Conference (MNC 2009), Sapporo, Japan, 16 - 19 Nov 2009. 2pp.

Brambilla, G. and Xu, F. (2008) Demonstration of a refractometric sensor based on optical microfiber coil resonator. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Bricchi, E., Yang, W. and Kazansky, P.G. (2005) Robustness of femtosecond direct written structures in silica glass. In, The Conference on Lasers and Electro-Optics (CLEO) and the Quantum Electronics and Laser Science Conference (QELS) (CLEO/QELS 2005), Baltimore, USA, 22 - 27 May 2005.

Brown, I., Jude, S., Koukoulas, S., Nicholls, R.J., Dickson, M. and Walkden, M. (2008) Using virtual reality to simulate coastal erosion: a participative decision tool? In, GIS for Environmental Decision Making. , CRC Press, 193-210.

Brown, Iain, Jude, Simon, Koukoulas, Sotiris, Nicholls, Robert, Dickson, Mark and Walkden, Mike (2006) Dynamic simulation and visualisation of coastal erosion. Computers, Environment and Urban Systems, 30, (6), 840-860. (doi:10.1016/j.compenvurbsys.2005.08.002).

Bu, M., Husband, B., Melvin, T., Ensell, G.J., Pham, N.P., Sarro, P.M., Wilkinson, J.S. and Evans, A.G.R. (2003) Fabrication of a microfluidic chip for PCR applications. In, 14th MicroMechanics Europe Workshop, Delft, The Netherlands, 02 - 04 Nov 2003.

Byfield, M.P. (2001) Reliability of steelwork designed to Eurocode 3. In, IABSE Conference on Safety, Risk and Reliability in Engineering, Malta, 21 - 23 Mar 2001. , 203-208.

Byfield, M.P. (2005) Prevention of progressive collapses due to terrorist attacks. In, Proceedings of 3rd International Conference on Forensic Engineering: Diagnosing Failures and Solving Problems. 3rd International Conference on Forensic Engineering London, UK, Taylor and Francis, 233-240.

Byfield, M.P. (2005) Limitations in the use of composite connections with unpropped construction. In, Hoffmeister, B. and Hechler, O. (eds.) Eurosteel 2005. 4th European Conference on Steel and Composie Structures , Druck und Veragshaus, 245-252.

Byfield, M.P. (2008) Introduction. Organisational lessons from failure. In, Learning from Failures - a Civil Engineering special issue. , Institution of Civil Engineers (ICE), 3.

Byfield, Mike and Dhanalakshmi, Muniasamy (2002) Strength and ductility of composite connections. The Structural Engineer, 80, (13), 18.

Canagasabey, Albert, Mezzapesa, Francesco P., Corbari, Costantino, Kazansky, Peter G. and Ibsen, Morten (2006) 75% Enhancement of the second order nonlinearity in twin-hole fibres through voltage assisted cooling during poling. In, 2006 CLEO: Conference on Lasers and Electro-Optics, 2006, Long Beach, USA, 21 - 25 May 2006.

Castaner, L., Bermejo, S., Markvart, T. and Fragaki, K. (2003) Energy balance in stand-alone PV systems. In, Markvart, T. and Castaner, L. (eds.) Practical handbook of photovoltaics: fundamentals and applications. , Elsevier, 531-542.

Castro, I.P., Hancock, P.E. and Thomas, T.G. (2002) Advances in Turbulence IX, Proceedings of the 9th European Turbulence Conference, Barcelona, Spain, International Center for Numerical Methods in Engineering, 907pp.

Chandraprabha, S. and Molland, A.F. (2004) A numerical prediction of wash wave and wave resistance of high speed displacement ships in deep and shallow water. In, Thailand Conference on Mechanical Engineering 18 - 20 Oct 2006.

Chaplin, J.R. (2002) Steady and unsteady flow in wave-induced boundary layers. In, 17th International Workshop on Water Waves and Floating Bodies, Cambridge, UK, 14 - 17 Apr 2002. , 139-142.

Chaplin, J.R. (2002) Level-set simulation of the vertical flow generated by a surface piercing body. In, 5th Numerical Towing Tank Symposium, Pornichet, France, 29 Sep - 01 Oct 2002.

Chaplin, J.R. (2003) Level-set modeling of the two-phase flow generated by a surface piercing body. In, 18th International Workshop on Water Waves and Floating Bodies, Le Croisic, France, 06 - 09 Apr 2003.

Chaplin, J.R. (2004) Non-linear run-up on a vertical cylinder surface-piercing cylinder. In, Proceedings of the 23rd OMAE Conference, ASME, Vancouver, Canada, 23 - 28 Jun 2004. , OMAE2004-51549.

Chaplin, J.R., Dunn, D.C., Peregrine, D.H., Mouaze, D. and Murzyn, F. (2003) Turbulence at the free surface. In, 18th International Workshop on Water Waves and Floating Bodies, Le Croisic, France, 06 - 09 Apr 2003.

Chaplin, J.R., Mouaze, D. and Murzyn, F. (2004) Turbulence at free surface in hydraulic jumps. In, Proceedings 2004 ASME Heat Transfer/Fluids Engineering Summer Conference, North Carolina, USA, 11 - 15 Jul 2004. 1092pp, PaperHT-FED04.

Chaplin, J.R. and Rainey, R.C.T. (2003) Wave breaking and cavitation around a vertical cylinder: Experiments and Linear Theory. In, 18th International Workshop on Water Waves and Floating Bodies, Le Croisic, France, 06 - 09 Apr 2003.

Chatterjee, K., Beecroft, M.E. and Lyons, G.D. (2002) Local travel: Number five in a series of eight reports from the transport visions network. Landor, London, Transport Visions Network

Chen, J., Taylor, M., Gregson, P.J. and Browne, M. (2001) Introducing an interface failure model to predict fatigue crack growth of biomedical material specimens. In, Fifth International Symposium on Computer Methods in Biomechaniocs and Biomedical Engineering, 31st October - 3rd November 2001, , 63F.

Chen, L., Cox, S.J., Goble, C., Keane, A.J., Roberts, A., Shadbolt, N.R., Smart, P. and Tao, F. (2002) Knowledge Services for Distributed Service Integration. In, 1st UK e-Science all-hands meeting, Sheffield, UK, 02 - 04 Sep 2002.

Chen, Z., Clements-Croome, D.J, Hong, J., Li, H., Kaluarachchi, Y., Jones, K.G, James, P.A.B., Jentsch, M. and Bahaj, A. S. (2005) A facade casebase for teaching and learning intelligent buildings. In, Proceedings of CISBAT 2005: Renewables in a Changing Climate - Innovation in Building Envelopes and Environmental Systems. CISBAT 2005 , CISBAT, 581-584.

Cheng, Hong and Castro, Ian P. (2002) Near wall flow over urban-like roughness. Boundary-Layer Meteorology, 104, (2), 229-259. (doi: 10.1023/A:1016060103448).

Chernyshenko, S.I. (2003) Streaks in near-wall turbulent flow and generalisation of the optimal perturbations theory. In, The British Applied Mathematics Colloquium 2003, Southampton, UK, 07 - 10 Apr 2003.

Chernyshenko, S.I. (2003) Organized structures in the near-wall turbulence and generalized optimal perturbations. At International Conference, Kolmogorov and Contemporary Mathematics, Scientific Program, Moscow State University, Moscow, Russia, 16 - 21 Jun 2003.

Cherrett, T.J., Hickford, A.J. and Maynard, S. (2007) The potential for local bring-sites to reduce householder recycling mileage. Transportation Research Record, 2011, 201-209. (doi:10.3141/2011-22).

Cherrett, Tom (2008) Changes in distribution and logistics. In, E-Hampshire Conference 2008 - What is the 3 Screen World?, Winchester, UK, 21 May 2008.

Chinh, N.Q., Voros, G., Horita, Z. and Langdon, T.G. (2002) Work hardening behavior of aluminum over a wide range of strain. In, Zhu, Y.T., Langdon, T.G., Mishra, R.S., Semiatin, S.L., Saran, M.J. and Lowe, T.C. (eds.) Ultrafine Grained Materials II. 2002 TMS Annual Meeting and Exhibition , Minerals, Metals & Materials Society, 567-574.

Chmelik, F., Lukac, P., Kainer, K.-U. and Langdon, T.G. (2002) Non-destructive characterization of magnesium based metal matrix composites during thermal cycling. NDT Welding Bulletin Special Issue, 7-10.

Chmelik, F., Mathis, K., Lukac, P. and Langdon, T.G. (2002) Investigating magnesium alloys and composites using the acoustic emission technique. In, Mazal, P. (ed.) Proceedings of the 25th European Conference on Acoustic Emission Testing (EWGAE 2002). 25th European Conference on Acoustic Emission Testing (EWGAE 2002) Brno, Czech Republic, Czech Society for Non-destructive Testing, 117-124.

Choudhury, A., Nair, P.B. and Keane, A.J. (2002) A data parallel approach for large-scale Gaussian process modelling. In, Proceedings of the Second SIAM International Conference on Data Mining. Second SIAM International Conference on Data Mining , SIAM, 95-111.

Christensen, S.W., Reed, P.A.S., Gunn, S.R. and Sinclair, I. (2002) Comparison of modelling techniques in the analysis of commercial materials data. In, Proceedings of Intelligent Processing and Manufacturing of Materials. IPMM-2001: The 3rd International Conference on Intelligent Processing and Manufacturing of Materials , IPMM, 49-58. (1256).

Ciavarella, M. (2000) Conditions of yield and cyclic plasticity around inclusions. Journal of Strain Analysis for Engineering Design, 35, (1), 65-70.

Ciavarella, M. (2001) Closure on "Some comments on recent generalizations of Cattaneo–Mindlin". International Journa of Solids Structures, 38, (14), 2459-2463. (doi:10.1016/S0020-7683(00)00102-5).

Ciavarella, M. (2003) A crack-like notch analogue for a safe-life fretting fatigue design methodology. Fatigue and Fracture of Engineering Materials and Structures, 26, (12), 1159-1170. (doi:10.1046/j.1460-2695.2003.00721.x).

Ciavarella, M., Decuzzi, P., Tagarelli, V.L. and Demelio, G.P. (2003) Simple formulas for thermoelastic stresses in TBC coatings. Journal of Thermal Stresses, 26, (5), 409-422.

Ciavarella, M. and Demelio, G. (2000) On the extraction of notch stress intensity factors by the post-processing of stress data on the free edges of the notch. Journal of Strain Analysis for Engineering Design, 35, (3), 221-26.

Ciavarella, M., Demelio, G. and Hills, D.A. (1999) The use of almost complete contacts for fretting fatigue tests. In, Fatigue and Fracture Mechanics: 29th Volume. West Conshohocken, USA, American Society for Testing and Materials, 696-709. (Fatigue and Fracture Mechanics, 29).

Ciavarella, M. and Macina, G. (2003) A note on the crack analogue model for fretting fatigue. International Journal of Solids and Structures, 40, (4), 807-825. (doi:10.1016/S0020-7683(02)00652-2).

Ciavarella, M. and Maitournam, H. (2004) On the Ekberg, Kabo and Andersson calculation of the Dang Van high cycle fatigue limit for rolling contact fatigue. Fatigue and Fracture of Engineering Materials and Structures, 27, (6), 523-528. (doi:10.1111/j.1460-2695.2004.00772.x).

Ciavarella, M., Murolo, G. and Demelio, G. (2004) The electrial/thermal conductance of rough surfaces - the Weierstrass - Archard multiscale model. International Journal of Solids and Structures, 41, (15), 4107-4120. (doi:10.1016/j.ijsolstr.2004.02.048).

Ciavarella, Michele and Meneghetti, Giovanni (2004) On fatigue limit in the presence of notches: classical vs. recent unified formulations. International Journal of Fatigue, 26, (3), 289-298. (doi:10.1016/S0142-1123(03)00106-3).

Clarke, D. (2008) Predicted effects of climate change and sea level rise on water table levels and dune slack habitats. In, Changing Perspectives in Coast Dune Management, Liverpool, UK, 31 Mar - 03 Apr 2008.

Clarke, D. and Sanitwong Na Ayuttaya, S. (2006) Impacts of climate change and sea level rise on coastal aquifers. In, UK Young Coastal Scientists' and Engineers' Conference 06 (YCSEC’06), Southampton, UK, 19 - 20 Apr 2006.

Clarkson, W. A. (2008) Fibre-laser-pumped-erbium-solid-state lasers. In, LPHYS'08 17th International Laser Physics Workshop, Trondheim, Norway, 30 Jun - 04 Jul 2008.

Clayton, C.R.I. (2004) The effect of particle shape on the behaviour of gold tailings. In, Jardine, R.J., Potts, D.M. and Higgins, K.G. (eds.) Advances in Geotechnical Engineering: The Skempton Conference. Advances in Geotechnical Engineering - The Skempton Memorial Conference , Thomas Telford, 393-404.

Clayton, C.R.I. (2009) Editorial. Geotechnique - moving on. Geotechnique, 59, (1), 1. (doi:10.1680/geot.2009.59.1.1).

Clayton, C.R.I. and Heymann, G. (2001) Soil stiffness in stress paths relevant to diaphragm walls in clay. Powrie, W., Pantelidou, H. & Stallebrass, E. (1998). Geotechnique 48, No. 4, 483 ± 494. , Thomas Telford, 2pp. (doi:10.1680/geot.51.2.177.40286).

Clayton, C.R.I., Matthews, M.C. and Heymann, G. (2002) The Chalk. In, Tan, T.S., Phoon, K.K., Hight, D.W. and Leroueil, S. (eds.) Characterisation and Engineering Properties of Natural Soils: Proceedings of the International Workshop. Invited Paper. International Workshop on Characterisation and Engineering Properties of Natural Soils , A.A. Balkema, 1402-1434.

Cloude, S.R., Papathanassiou, K.P., Woodhouse, I.H., Suarez Minguez, J.C., Osbourne, P.E. and Wright, G. (2001) The Glen Affric radar project: investigating applications of polarimetric SAR interferometry. In, Committee on Earth Observation Satellites Synthetic Aperture Radar (CEOS-SAR) Workshop., Tokyo, Japan, 02 - 05 Apr 2001.

Codemard, C.A., Sahu, J.K. and Nilsson, J. (2007) High-brightness pulsed cladding-pumped Raman fibre source at 1660 nm. In, The Conference on Lasers and Electro-Optics (CLEO) and the Quantum Electronics and Laser Science Conference (QELS) (CLEO/QELS 2007), Baltimore, USA, 06 - 11 May 2007.

Coggon, D., Croft, P., Kellingray, S., Barrett, D.S., McLaren, M. and Cooper, C. (2000) Occupational physical activities and osteoarthritis of the knee. Arthritis and Rheumatism, 43, (7), 1443-1449. (doi:10.1002/1529-0131(200007)43:7<1443::AID-ANR5>3.0.CO;2-1).

Coleman, G.N. and Sandham, N.D. (2002) Direct numerical simulations of separation bubbles, Chapter 24. In, Launder, B.E. and Sandham, N.D. (eds.) Closure Strategies for Turbulent and Transitional Flows. Cambridge, UK, Cambridge University Press, 702-719.

Cook, P.B.A. (2002) Cryogenic fluids databook, British Cryogenics Council

Cooper, L.J., Wang, P., Williams, R.B., Sahu, J.K., Clarkson, W.A., Scott, A.M. and Jones, D. (2005) High-power Yb-doped multi-core ribbon fiber laser. Optics Letters, 30, (21), 2906-2908.

Cotton, J.R., Zioupos, P. and Taylor, M. (2001) Simulated material property degradation during fatigue of human cancellous bone, as modelled by a regular honeycombe structure. In, Kamm, R.D., Schmid-Schonbein, G.W., Ateshian, G.A. and Hefzy, M.S. (eds.) Proceedings of 2001 Bioengineering Conference, ASME 2001. 2001 ASME Summer Bioengineering Conference Snowbird, Utah, USA, ASME, 287-288.

Cunningham, P.R. and White, R.G. (2003) Dynamic response of doubly curved honeycomb sandwich panels to random acoustic excitation. Part 1: Experimental study. Journal of Sound and Vibration, 264, (3), 579-603. (doi:10.1016/S0022-460X(02)01210-5).

Curry, R.J., Hughes, M., Aronson, J., Brocklesby, W.S. and Hewak, D. (2004) Vanadium doped chalcogenide glasses for broadband near-infrared sources. In, ACerS, Glass & Optical Materials Division Fall Meeting 2004, Florida, USA, Nov 2004.

Dacombe, P., Banks, C. J. and Heaven, S. (2004) Energy footprint analysis: waste management options for the processing of the paper and card fraction of household waste. In, IWM & LCA Conference, Prague, Czech Republic, 13 - 16 Apr 2004.

Dacombe, P. and Banks, C.J. (2006) Energy footprint analysis: does recycling reduce the environmental impact of domestic waste management? In, 5th annual symposium on waste treatment technologies 2006, Torbay, UK, Jun 2006.

Dacombe, P., Banks, C.J., Khan, T. and Heaven, S. (2006) Integrated systems for practical recovery of non-MSW waste streams. In, Waste 2006: Sustainable Waste and Resource Management, Warwick, UK, 19 - 21 Sep 2006. , 319-324.

Danisman, M.F., Calkins, J.A., Sazio, P.J.A., Allara, D.L. and Badding, J.V. (2008) Organosilane self-assembled monolayer growth from supercritical carbon dioxide in microstructured optical fiber capillary arrays. Langmuir, 24, (7), 3636-3644. (doi:10.1021/la703155z).

Darby, M.S.B., May-Smith, T.C., Eason, R.W., Donelly, T., Lunney, J.G. and Rogers, K.D. (2007) A comparative study of gadolinium gallium garnet growth by femtosecond and nanosecond pulsed laser deposition. Applied Surface Science, 254, (11), 3364-3369. (doi:10.1016/j.apsusc.2007.11.016).

Dawson, R.J., Dickson, M., Nicholls, R.J., Hall, J., Walkden, M.J.A., Stansby, P.K., Mokrech, M., Richards, J., Zhou, J., Milligan, J., Jordan, A., Pearson, S., Rees, J., Bates, P.D., Koukoulas, S. and Watkinson, A. (2009) Integrated analysis of risks of coastal flooding and cliff erosion under scenarios of long term change. Climatic Change, 95, (1-2), 249-288. (doi:10.1007/s10584-008-9532-8).

Deng, Jun and Lee, Marcus M.K. (2009) Adhesive bonding in steel beams strengthened with CFRP. Proceedings of the Institution of Civil Engineers. Structures and buildings, 162, (4), 241-249. (doi:10.1680/stbu.2009.162.4.241).

Denisyuk, A.I., MacDonald, K.F. and Zheludev, N.I. (2008) Cathodoluminescence readout of high-density nanoparticle phase change memory. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Deparis, O., Kazansky, P.G., Podlipensky, A., Abdolvand, A., Seifert, G. and Graener, H. (2005) Evolution of poling-assisted bleaching of metal-doped nanocomposite glass with poling conditions. Applied Physics Letters, 86, (26), 261109-261112. (doi:10.1063/1.1977205).

Doerffel, D. and Abu-Sharkh, S.M. (2005) Efficient testing and evaluation methods for faster market introduction of large lithium-ion batteries. In, First International Symposium on Large Lithium Ion Battery Technology and Application

Donohue, P.P. (2001) Annealing studies of detector materials for uncooled thermal imaging. University of Southampton, Faculty of Engineering and Applied Science, Optoelectronic Research Centre, Doctoral Thesis .

Du, S.X., Hudson, D.A., Price, W.G., Temarel, P. and Wu, Y.S. (2003) Numerical prediction of steady flow around high speed vessels with transom sterns. In, The 7th International Conference on Fast Sea Transportation, Italy, 07 - 10 Oct 2003.

Duan, W.Y., Huang, D.B., Hudson, D.A. and Price, W.G., Wilson, Philip A. (ed.) (2001) Comparison of two seakeeping prediction methods for high speed multi-hull vessels. FAST 2001: Sixth International Conference on Fast Sea Transportation, 2, 243-250. (doi:10.3940/rina.ft.2001).

Earl, J.S., Dulieu-Barton, J.M. and Shenoi, R.A. (2001) Thermoelastic stress analysis of aged sandwich structures. In, ICCM13: 13th International Conference on Composite Materials, Beijing, China, Jun 2001. 10pp.

Earl, J.S., Dulieu-Barton, J.M. and Shenoi, R.A. (2004) Thermoelastic stress analysis as a validation tool for FEA of composite tee joint. In, NAFEMS Seminar on FEA Versus Test, Radcliffe-upon-Soar, UK, 03 Nov 2004. , 4 pages.

Eason, R. W., May-Smith, T. C., Grivas, C., Darby, M. S. B., Shepherd, D. P. and Gazia, R. (2008) Current state of the art of pulsed laser deposition: existing capabilities and future trends. In, EMRS 2008 (European Materials Research Society) Spring Meeting, Strasbourg, France, 26 - 30 May 2008.

Ebendorff-Heidepriem, H. (2001) Er+3 doped glasses for laser and amplifier applications. At Weyl Award Lecture: XIX International Congress on Glass, Edinburgh, UK, 01 - 06 Jul 2001.

Ellis, A.D., Cotter, D., Ibrahim, S., Weerasuriya, R., Chow, C.W., Leuthold, J., Freude, W., Sygletos, S., Vorreau, P., Bonk, R., Hillerkuss, D., Tomkos, I., Tzanakaki, A., Kouloumentas, C., Richardson, D.J., Petropoulos, P., Parmigiani, F., Zarris, G. and Simeonidou, D. (2008) Optical interconnection of core and metro networks. Journal of Optical Networking, 7, (11), 928-935. (doi:10.1364/JON.7.000928).

Farhangi, S., Clayton, C.R.I. and Richards, D.J. (2006) Comparison of analytically and numerically determined strain paths around two geometries. In, 4th International FLAC Symposium on Numerical Modelling in Geomechanics 2006, Madrid, Spain, 29 - 31 May 2006. , 1-7.

Farhangi, S., Richards, D.J. and Clayton, C.R.I. (2005) A review of the interpretation techniques for push-in pressure cell measurements. In, International Symposium for the 50th Anniversary of the Pressuremeter, Paris, France, 22 - 24 Aug 2005. , 279-287.

Farhangi, S., Richards, D.J. and Clayton, C.R.I. (2006) Numerical determination of soil deformations around a penetrating object in 2D and 3D models. In, Numerical Methods in Geotechnical Engineering: Sixth European Conference. 6th European Conference on Numerical Methods in Geotechnical Engineering , Taylor & Francis, 707-712.

Fedotov, V.A., Mladyonov, P.L., Prosvirnin, S.L., Rogacheva, A.V., Chen, Y. and Zheludev, N.I. (2006) Asymmetric transmission of light through a planar chiral meta-material. In, QEP-17 at Photon06, Manchester, UK, 04 - 07 Sep 2006.

Fedotov, V.A., Plum, E., Schwanecke, A.S., Chen, Y., Khardikov, V.V., Prosvirnin, S.L. and Zheludev, N.I. (2007) Photonic chiral metamaterials. In, Photonic Metamaterials: From Random to Periodic (META 2007), Jackson Hole, USA, 04 - 07 Jun 2007.

Felstead, T.J. and McDonald, M. (2008) Extremes in driving style and their potential effect upon vehicle emissions. In, Proceedings of the 40th Annual Meeting of the Universities' Transport Study Group, Southampton, UK, Jan 2008.

Felstead, Tim, McDonald, Mike and Fowkes, Mark (2009) Driving style extremes and potential vehicle emission effects. Proceedings of the Institution of Civil Engineers - Transport, 162, (3), 141-148. (doi:10.1680/tran.2009.162.3.141).

Feng, Xian, Poletti, Francesco, Camerlingo, Angela, Parmigiani, Francesca, Horak, Peter, Petropoulos, Periklis, Loh, Wei H. and Richardson, David J. (2009) Dispersion-shifted all-solid high index-contrast microstructured optical fiber for nonlinear applications at 1.55µm. Optics Express, 17, (22), 20249-20255. (doi:10.1364/OE.17.020249).

Finlayson, C.E. (2006) Comment on "Optical characterization of quantum dots entrained in microstructured optical fibers" [Physica E 26 (2005) 377-381]. Physica E: Low-dimensional Systems and Nanostructures, 31, (1), 107-108. (doi:10.1016/j.physe.2005.10.005).

Flanagan, Joanne C., Amezcua, R., Poletti, F., Hayes, J.R., Broderick, N.G.R. and Richardson, D.J. (2008) The effect of periodicity on the defect modes of large mode area microstructured fibers. Optics Express, 16, (23), 18631-18645. (doi:10.1364/OE.16.018631).

Forrester, A.I.J., Bressloff, N.W. and Keane, A.J. (2006) Optimization using surrogate models and partially converged computational fluid dynamics simulations. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 462, (2071), 2177-2204. (doi: 10.1098/rspa.2006.1679).

Fortescue, Peter and Swinerd, Graham (2003) Attitude control. In, Fortescue, Peter, Stark, John and Swinerd, Graham (eds.) Spacecraft systems engineering, 3rd edition. , Wiley & Sons, 287-324.

Fragaki, A. and Markvart, T. (2003) Does global warming affect the design of stand-alone PV systems. At Materials Research Group 2pp, 155-156.

Fujita, T., Horita, Z. and Langdon, T.G. (2001) Diffusivity measurements in ultrafine-grained Al-Mg alloys produced by equal-channel angular pressing. In, Chandra, T., Higashi, K., Suryanarayana, C. and Tome, C. (eds.) THERMEC 2000 - International Conference on Processing and Manufacturing of Advanced Materials. International Conference on Processing and Manufacturing of Advanced Materials Oxford, UK, Elsevier.

Fukuda, M., Oh-ishi, K., Horita, Z. and Langdon, T.G. (2001) Microstructures and mechanical properties of low-carbon steel processed by equal-channel angular pressing. In, Takaki, S. and Maki, T. (eds.) Ultrafine Grained Steels. International Symposium on Ultrafine Grained Steels (ISUGS 2001) Tokyo, Japan, Iron and Steel Institute of Japan, 156-159.

Fukuda, Y., Oh-ishi, K., Horita, Z. and Langdon, T.G. (2002) Processing of a low-carbon steel by equal-channel angular pressing. Acta Materialia, 50, (6), 1359-1368. (doi:10.1016/S1359-6454(01)00441-4).

Furukawa, M., Horita, Z. and Langdon, T.G. (2001) Using severe plastic deformation for the processing of structural metals. In, Lesuer, D.R. and Srivatsan, T.S. (eds.) Modeling the Performance of Engineering Structural Materials. Symposium Sponsored by the Structural Materials Division (Smd) of Tms (The Minerals, Metals & Materials Society) Held During the fall , TMS, 267-276.

Furukawa, M., Horita, Z. and Langdon, T.G. (2001) The principles of processing using severe plastic deformation: Application to aluminum alloys. In, Tiryakioglu, M. (ed.) Advances in the Metallurgy of Aluminum Alloys. James T. Staley Honorary Symposium on Aluminum Alloys , ASM International, 47-56.

Furukawa, M., Horita, Z. and Langdon, T.G. (2002) Developing superplasticity at high strain rates through ECAP processing. In, Zhu, Y.T., Langdon, T.G., Misra, R.S., Semiatin, S.L., Saran, M.J. and Lowe, T.C. (eds.) Ultrafine grained materials II. 2002 TMS Annual Meeting and Exhibition , Minerals, Metals & Materials Society, 459-468.

Furukawa, M., Lee, S., Horita, Z. and Langdon, T.G. (2001) Mechanical properties of Al-Mg-Sc and commercial aluminum alloys after equal-channel angular pressing. In, Kim, Nack J., Lee, C.S. and Eylon, D. (eds.) Proceedings of the International Conference on Light Materials for Transportation Systems (LiMAT-2001) (2nd) Held in Pusan, Korea on May 6-10, 2001. International Conference on Light Materials for Transportation Systems (LiMAT-2001) Pohang, Korea, Center for Advanced Aerospace Materials, 647-652.

Gad, E.F., Chandler, A.M. and Duffield, C.F. (2001) Modal analysis of steel framed domestic construction for application to seismic design. Journal of Vibration & Control, 7, (1), 91-111. (doi:10.1177/107754630100700106).

Gao, N., Brown, M.W., Miller, K.J. and Reed, P. A. S. (2007) An effective method to investigate short crack growth behaviour by reverse bending testing. International Journal of Fatigue, 29, 565-574.

Gazia, R., May-Smith, T.C. and Eason, R.W. (2008) Growth of a hybrid garnet crystal multilayer structure by combinatorial pulsed laser deposition. Journal of Crystal Growth, 310, (16), 3848-3853. (doi:10.1016/j.jcrysgro.2008.05.035).

Goldfinch, A., Curtis, J.P., Cullis, I.G., Hills, D., Keane, A. and Wrigley, D. (2002) Further development of the jet suite capability: application of optimisation techniques for advanced warhead design. In, 20th International Symposium on Ballistics, Orlando, FL, USA, 23 - 27 Sep 2002. , 501-508.

Grivas, C. and Eason, R. W. (2008) Reflective (R=80%) volume gratings in Ti:sapphire waveguides fabricated by femtosecond UV-laser pulses. In, 3rd EPS/QEOD Europhoton Conference, Paris, France, 31 Aug - 05 Sep 2008.

Guerin, S., Hayden, B., Hewak, D.W., Purdy, G. and Simpson, R.E. (2005) Combinatorial synthesis and screening of chalcogenide materials for data storage. In, PCOS 17th Symposium, Japan, 17 - 18 Nov 2005. , 6 pp.

Guerrero, L., Montalvo, S., Coronado, E., Chamy, R., Porrier, P., Crutchik, D., Sanchez, E., De la Rubia Romero, M.A. and Borja, R. (2009) Performance evaluation of a two-phase anaerobic digestion process of synthetic domestic wastewater at ambient temperature. Journal of Environmental Science and Health, Part A. Toxic/Hazardous Substances and Environmental Engineering, 44, (7), 673-681. (doi:10.1080/10934520902847794).

Guignard, C., Besnard, P., Mihaescu, A. and Zheludev, N.I. (2006) Harmonic passive mode-locking of a single-frequency semiconductor laser submitted to nonlinear optical feedback. IEEE Journal of Quantum Electronics, 42, (12), 1185-1195. (doi:10.1109/JQE.2006.882878).

Guo, Jinjun, Xu, Liang, Dai, Lianjun, McDonald, Mike, Wu, Jianping and Li, Yanying (2005) Application of the Real-Time Kinematic Global Positioning System in Bridge Safety Monitoring. Journal of Bridge Engineering, 10, (2), 163-168. (doi:10.1061/(ASCE)1084-0702(2005)10:2(163)).

Hadjimitsis, D.G., Clayton, C.R.I., Perdikou, P.N. and Retalis, A. (2003) Exploring the need for identifying suitable pseudo-invariant targets for applying atmospheric correction in multi-temporal studies using satellite remotely sensed imagery. In, Ehlers, M. (ed.) Remote Sensing for Environmental Monitoring, GIS Applications, and Geology II (Proceedings Volume). Conference on Remote Sensing for Environmental Monitoring, GIS Applications, and Geology II (Crete 2002) , SPIE Society, 205-216. (doi:10.1117/12.463317).

Hadjimitsis, D.G., Retalis, A., Clayton, C.R.I., Perdikou, P.N. and Zlatoudis, A.E. (2002) Satellite remote sensing in support of land-cover mapping in Skiathos island, Greece. In, Proceedings of International Conference on the Protection and Restoration of the Environment VI, Skiathos, Greece, 01 - 05 Jul 2002. , 1681-1687.

Hadjimitsis, Diofantos G, Clayton, Christopher R. and Retalis, Adrianos (2004) On the darkest pixel atmospheric correction algorithm: a revised procedure applied over satellite remotely sensed images intended for environmental applications. In, Ehlers, Manfred, Kauffmann, Hermann J. and Michel, Ulrich (eds.) Remote Sensing for Environmental Monitoring, GIS Applications, and Geology III. Bellingham, USA, Society of Photo-Optical Instrumentation Engineers, 464-471. (Proceedings of SPIE, 5239). (doi:10.1117/12.511520).

Hall, J.W, Dawson, R.J, Walkden, M., Dickson, M., Stansby, P., Nicholls, R.J., Zhou, J.L, Brown, I. and Watkinson, A. (2005) Broad-scale analysis of morphological and climate impacts on coastal flood risk. In, International Conference on Coastal Dynamics, Barcelona, Spain, 04 - 08 Apr 2005.

Harris, N.R., Hill, M., White, N.M. and Beeby, S.P. (2004) Acoustic power output measurements for thick-film PZT transducers. Electronics Letters, 40, (10), 636-637. (doi:10.1049/el:20040428).

Harvey, Nick and Nicholls, Robert (2008) Global sea-level rise and coastal vulnerability. Sustainability Science, 3, (1), 5-7. (doi: 10.1007/s11625-008-0049-x).

Hayashi, K., Higaki, F., Shigemura, T. and Chaplin, J.R. (2003) Vortex-excited vibration of a circular cylinder in planar oscillating flow. International Journal of Offshore and Polar Engineering, 13, (4), 266-273.

He, F., Hung, H.S.S., Daga, N.K., Naz, N., Prawiharjo, J., Price, J.H.V., Hanna, D.C., Shepherd, D.P., Richardson, D.J., Dawson, J.W., Siders, C.W. and Barty, C.P.J. (2008) High energy femtosecond fiber chirped pulse amplification system with adaptive phase control. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Heaven, S. and Banks, C.J. (2004) Anaerobic digestion of WSP sludges at low temperatures. In, IWA Young Researchers' Conference 2004, Southampton, UK, 23 - 24 Apr 2004. IWA368pp.

Heaven, S. and Leighty, H. (2001) The Environment. In, Doing Business with Kazakhstan. , Global Market Briefings (GMB), 157-163.

Heaven, S. and Tanton, T.W. (2002) Problems of demercurisation of the river Nura in Central Kazakhstan. In, Abstracts of International Conference on Problems of freshwater mercury pollution in natural and manmade reservoirs and possible ways for remediation

Heaven, S. and Williams, I.D. (2006) Collected bulky household waste in England – potential for reuse and recycling. In, Waste 2006 Proceedings. Waste 2006, Sustainable Waste and Resource Management , Waste Conference Ltd, 603-612.

Heller, Valentin and Pfister, Michael (2009) Discussion of “Computing the Trajectory of Free Jets” by Tony L. Wahl, Kathleen H. Frizell, and Elisabeth A. Cohen. Journal of Hydraulic Engineering, 135, (7), 622-623. (doi:10.1061/(ASCE)HY.1943-7900.0000011).

Hewak, D.W. (2008) Chalcogenide glass for non-linear optics, the shape of things to come. In, 16th International Symposium on Non-Oxide and New Optical Glasses (ISNOG XVI), Montpellier, France, 20 - 25 Apr 2008.

Hickford, Adrian, Cherrett, Tom and Maynard, Sarah (2009) Transport implications of bring-site recycling. Proceedings of the Institution of Civil Engineers - Waste and Resource Management, 162, (1), 29-36. (doi:10.1680/warm.2009.162.1.29).

Hill, M., Townsend, R.J., Harris, N.R. and White, N.M. (2004) Microfabricated acoustic resonators for manipulating particles within a fluid. Proceedings of the Institute of Acoustics, 26, (2), 442-451.

Hinton, C. and Nicholls, R.J. (2001) Large-scale shoreface response to a prominent anthropogenic structure: A case study of the Ijmuiden Harbour moles, Holland. In, Hanson, H. (ed.) Coastal Dynamics '01: Proceedings of the Fourth Conference on Coastal Dynamics, June 11-15, 2001, Lund Sweden. Fourth Conference on Coastal Dynamics New York, USA, American Society of Civil Engineers, 607-616.

Holden, C.M.E., Davies, R. and Keane, A.J. (2002) Optimization methodologies in conceptual design. In, 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization Online Proceedings, 4-6 September 2002. , AIAA 2002, 1-11.

Horita, Z., Fujinami, T., Nemoto, M. and Langdon, T.G. (2001) Improvement of mechanical properties for Al alloys using equal-channel angular pressing. Journal of Materials Processing Technology, 117, (3), 288-292. (doi:10.1016/S0924-0136(01)00783-X).

Horita, Z., Fujinami, T., Sato, K., Kang, S.B., Kim, H.W. and Langdon, T.G. (2001) Microstructures and mechanical properties of aluminum alloys processed by equal-channel Aagular pressing. In, Tiryakioglu, M. (ed.) Advances in the Metallurgy of Aluminum Alloys. James T. Staley Honorary Symposium on Aluminum Alloys , ASM, 271-275.

Horita, Z., Neishi, K. and Langdon, T.G. (2002) Grain refinement of copper based alloys Using ECAP. In, Zhu, Y.T., Langdon, T.G., Mishra, R.S., Semiatin, S.L., Saran, M.J. and Lowe, T.C. (eds.) Ultrafine grained materials II. 2002 TMS Annual Meeting and Exhibition , Minerals, Metals & Materials Society, 449-457.

Hounsell, N.B. and Shrestha, B.P. (2008) Investigating issues of differential bus priority for high frequency services. In, 40th Annual Meeting of the Universities' Transport Study Group, Southampton, UK, 03 - 05 Jan 2008.

Hounsell, N.B., Shrestha, B.P., Palmer, S., Bowen, T. and D'Souza, C. (2008) New strategy options for bus priority at traffic signals in London. In, European Transport Conference 2008, Noordwijkerhout, The Netherlands, Oct 2008. ETC Proceedings.

Huang, C.C. and Hewak, D.W. (2004) High purity germanium sulphide glass for optoelectronic applications synthesized by chemical vapour deposition. Electronics Letters, 40, (14), 863-865. (doi:10.1049/el:20045141).

Huang, Fu Min and Zheludev, Nikolay I. (2009) Super-resolution without evanescent waves. Nano Letters, 9, (3), 1249-1254. (doi:10.1021/nl9002014).

Huang, L. and Wu, J. (2006) Evaluation of Performance of Beijing Expressway Based on Integrated GPS/GIS Data. In, 9th International IEEE Conference on Intelligent Transportation Systems, Toronto, Canada, 17 - 20 Sep 2006. 6pp, 927-932.

Huang, L., Wu, J. and Chen, J. (2006) Adaptive on-line congestion forecast model from integrated GPS/GIS data based on fuzzy logic. In, 3rd Traffic and Road Safety International Congress/Exhibition, Ankara, Turkey, 17 - 19 May 2006.

Huang, L., Wu, J. and Dong, J. (2006) A GPS/GIS Integrated Methodology for Urban Road Network Evaluation. In, 13th World Congress on Intelligent Transport Systems and Services, London, UK, 08 - 12 Oct 2006.

Huang, Ling and Wu, Jianping (2009) Cyclists' path planning behavioral model at unsignalized mixed traffic intersections in China. Intelligent Transportation Systems Magazine, IEEE, 1, (2), 13-19. (doi:10.1109/MITS.2009.933859).

Hudson, A. P., White, J.K., Beaven, R. P. and Powrie, W. (2004) Modelling the compression behaviour of landfilled domestic waste. Waste Management, 24, (3), 259-269. (doi:10.1016/j.wasman.2003.12.003).

Hudson, Dominic A., Molland, A.F., Price, W.G. and Temarel, P. (2001) Seakeeping performance of high speed catamaran vessels in head and oblique waves. In, Wilson, Philip A. (ed.) FAST 2001: Sixth International Conference on Fast Sea Transportation. FAST 2001: Sixth International Conference on Fast Sea Transportation London, UK, The Royal Institution of Naval Architects, 247-257. (1124).

Huh, Woo-kung and Song, Yena (2006) E-shopping and off-line delivery systems in Korea: real space still matters. NETCOM: Network and Communication Studies, 20, (3-4), 219-235.

Hung, H.S.S., Naz, N.A., Prawiharjo, J., Hanna, D.C. and Shepherd, D.P. (2006) Parametric transfer in a synchronously pumped optical parametric oscillator. In, 2006 CLEO: Conference on Lasers and Electro-Optics, 2006, Long Beach, USA, 21 - 25 May 2006. 2pp.

Istamkulov, M.R. and Heaven, S. (2001) BG educational initiative in Kazakhstan- Professional preparation for specialists in environmental management. The Globe, (In Russian)

James, P.A.B. and Bahaj, A.S. (2002) Economics of solar powered refrigeration transport applications. In, Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialist Converence 2002. 29th IEEE Photovoltaic Specialist Conference , IEEE, 1561-1564.

James, P.A.B., Jentsch, M.F. and Bahaj, A.S. (2009) Quantifying the added value of BiPV as a shading solution in atria. Solar Energy, 83, (2), 220-231. (doi:10.1016/j.solener.2008.07.016).

Jarry, E., Meunier, M., Miao, S.H. and Shenoi, A. (2002) Report on performance of bonded joints used in a patrol craft. , BONDSHIP (2049).

Jentsch, M.F., James, P.A.B. and Bahaj, A.S. (2006) Secondary facade layers in building refurbishment and their potential impact on building performance. In, World Renewable Energy Congress 2006. World Renewable Energy Congress (WREC-IX) , Elsevier Science.

Jeong, H.K. and Shenoi, R.A. (2002) Application of structural reliability techniques to the design of a FRP laminated composite plate. In, 1st International Colloquium on ASRANet Integrating Structural Reliability Analysis with Advanced Structural Analysis, Glasgow, UK, 08 - 10 Jul 2002. , CD Rom.

Jiang, L., Fitzgerald, A.G. and Rose, M.J. (2001) Surface morphology studies on carbon nitride films prepared by rf magnetron sputtering. In, Aindow, M. and Kiely, C.J. (eds.) Electron Microscopy and Analysis 2001. EMAG2001: Electron Microscopy and Analysis Group Conference , Taylor & Francis, 85-89. (Institute of Physics Conference Series, 168).

Jiang, X., Avital, E. and Luo, K.H. (2004) Direct computation and aeroacoustic modelling of a subsonic axisymmetric jet. Journal of Sound and Vibration, 270, (3), 525-538. (doi:10.1016/j.jsv.2003.09.045).

Jiang, X., Avital, E.J. and Luo, K.H. (2002) Effects of temperature ratio on the sound generation from an axisymmetric jet. In, 9th International Congress on Sound and Vibration (ICSV9), Orlando, USA, 08 - 11 Jul 2002.

Jiang, X. and Luo, K.H. (2001) Mixing and entrainment of transitional noncircular buoyant reactive plumes. Flow, Turbulence and Combustion, 67, (1), 57-79. (doi:10.1023/A:1013539806013).

Jiang, X. and Luo, K.H. (2001) Dynamics of transitional noncircular buoyant reactive jets with side-wall effects. In, Guerts, Bernard J., Friedrich, Rainer and Métais, Olivier (eds.) Direct and Large-Eddy Simulation IV. DLES4: 4th International ERCOFTAC Workshop on Direct and Large-Eddy Simulation The Netherlands, Kluwer Academic, 189-196. (ERCOFTAC Series 8).

Jones, R.T., Williams, T.J. and Abu-Sharkh, S. (1997) Electrostatic ignition assessment of flammable clouds in large vessels by finite-element potential and electric field analysis. In, The 1997 IChemE Jubilee Research Events. 1997 IChemE Jubilee Research Events London, UK, Institution of Chemical Engineers, 653-656.

Joyce, M.R., Lee, K.K., Syngellakis, S. and Reed, P.A.S. (2004) Quantitative assessment of preferential fatigue initiation sites in a multi-phase aluminium alloy. Fatigue and Fracture of Engineering Materials and Structures, 27, (11), 1025-1036. (doi:doi: 10.1111/j.1460-2695.2004.00815.x).

Joyce, M.R. and Reed, P.A.S. (2004) Fatigue crack growth behaviour under mixed mode loading in Udimet 720 SX. In, Green, Kenneth A., Pollock, Tresa M., Harada, Hiroshi, Howson, Timothy E., Reed, Roger C., Schirra, John J. and Walston, Scott (eds.) Superalloys 2004. 10th International Symposium on Superalloys , Minerals, Metals & Materials Society, 295-304.

Kamp, N., Starink, M.J., Sinclair, I., Gao, N., Gregson, P.J., Pitcher, P.D. and Gardiner, S. (2004) Development of Al-Cu-Mg-Li (Mn,Zr,Sc) alloys for age-forming. Materials Forum, 28, 369-375.

Kannath, A. and Rutt, H.N. (2007) Development of low cost instrumentation for non-invasive detection of Helicobacter Pylori. Advanced Research and Clinical Systems, 6430 (doi:10.1117/12.700168).

Karpov, E.G., Stephen, N.G. and Liu, W.K. (2003) Initial tension in randomly disordered periodic lattices. International Journal of Solids and Structures, 40, (20), 5371-5388. (doi:10.1016/S0020-7683(03)00290-7).

Kaur, K., Banks, D.P., Gazia, R., Grivas, C., Fardel, R., Nagel, M., Lippert, T. and Eason, R.W. (2008) Femtosecond laser-induced forward transfer of thin films using a Triazene polymer sacrificial layer and an active carrier. At European Materials Research Society EMRS 2008, Strasbourg, France, 26 - 30 May 2008.

Kaur, K.S., Fardel, R., May-Smith, T.C., Nagel, M., Banks, D.P., Grivas, C., Lippert, T. and Eason, R.W. (2009) Time resolved study of photopolymer assisted laser-induced forward transfer of thin ceramic films. In, 5th International Congress on Laser Advanced Materials Processing (LAMP 2009), Kobe, Japan,

Kazansky, P.G. (2004) Light craft: creating unusual properties in glass with light. In, Photon Craft International Co-operative Project Symposium, Kyoto, Japan, 24 Sep 2004.

Kazansky, P.G., Bricchi, E., Shimotsuma, Y., Qiu, J. and Hirao, K. (2004) Nanostructuring of transparent materials by ultrashort light pulses. In, Taiwan International Conference on Nano Science and Technology - TICON 2004, Hsinchu, Taiwan, 30 Jun - 03 Jul 2004. , 3 pp.

Kazansky, P.G., Bricchi, E., Shimotsuma, Y., Qiu, J. and Hirao, K. (2004) Self-organized nanostructures in glass irradiated by femtosecond light pulses. In, XX International Congress on Glass (ICG), Kyoto, Japan, 26 Sep - 01 Oct 2004.

Kazansky, P.G., Deparis, O., Carvalho, I.C.S., Bricchi, E., Yang, W., Abdolvand, A., Podlipensky, A., Seifert, G., Graener, H., Shimotsuma, Y., Qiu, J., Hirao, K., Bovatsek, J. and Arai, A. (2007) Recent advances in poling and nanostructuring of glass. In, 7th Pacific Rim conference on Ceramic and Glass Technology, Shanghai, China, 11 - 14 Nov 2007.

Kazansky, P.G., Deparis, O., Carvalho, I.C.S., Bricchi, E., Yang, W., Abdolvand, A., Podlipensky, A., Seifert, G., Graener, H., Shimotsuma, Y., Qiu, J., Hirao, K., Bovatsek, J. and Arai, A. (2007) Recent advances in nanostructuring of glass by strong fields: from poling assisted bleaching to femtosecond laser nanostructuring. In, IV International Symposium on Non-Crystalline Solids, VIII Brazilian Symposium on Glass and Related Materials, Brazil, 21 - 28 Oct 2007.

Kazansky, P.G., Deparis, O., Carvalho, I.C.S., Bricchi, E., Yang, W., Abdolvand, A., Podlipensky, A., Seifert, G., Graener, H., Shimotsuma, Y., Qiu, J., Hirao, K., Bovatzek, J. and Arai, A. (2007) Recent advances in nanostructuring of glass: from poling to femtosecond laser writing. In, Bragg Gratings, Photosensitivity and Poling in Glass Waveguides / Nonlinear Photonics (BGPP/NP 2007), Quebec, Canada, 02 - 06 Sep 2007.

Kazansky, P.G., Shimotsuma, Y., Qiu, J., Bricchi, E. and Hirao, K. (2003) Nanostructuring of transparent materials by light. In, Bragg Gratings, Photosensitivity and Poling in Glass Waveguides (BGPP 2003), Monterey, USA, 01 - 03 Sep 2003.

Kazansky, P.G., Shimotsuma, Y., Qiu, J. and Hirao, K. (2005) Self-organization in glass by light: From second-order nonlinearity to 3D nano-structures. In, International Symposium on Glass and Annual Meeting of the International Commission on Glass, Shanghai, China, 10 - 14 Apr 2005.

Kazansky, P.G., Yang, W., Bricchi, E., Bovatsek, J., Arai, A., Shimotsuma, Y., Miura, K. and Hirao, K. (2007) Quill writing with ultrashort light pulses in transparent optical materials. In, The Conference on Lasers and Electro-Optics (CLEO) and the Quantum Electronics and Laser Science Conference (QELS) (CLEO/QELS 2007), Baltimore, USA, 06 - 11 May 2007.

Kazi, Tarannum Ayesha, Stanton, Neville A., Walker, Guy H. and Young, Mark S. (2007) Designer driving: drivers' conceptual models and level of trust in adaptive cruise control. International Journal of Vehicle Design, 45, (3), 339-360. (doi:10.1504/IJVD.2007.014909).

Keary, A.C. and Bowen, R.J. (1996) A review of the development of a model of freezing and convection during cryogenic pipe freezing. In, 5th International Symposium on Thermal Engineering and Science for Cold Regions, Ottawa, Canada, 19 - 22 May 1996. , 290-296.

Kemp, P.S. (2006) The response of migrating juvenile Chinook salmon smolts to instream structure associated with. In, Proceedings of the Tenth International Symposium of Regulated Rivers, Stirling, Scotland., Stirling, UK, 14 - 18 Aug 2006.

Kemp, Simon, Martin, Fay, Maier, Pat and Williams, Ian (2009) A gap analysis of student employability profiles, employer engagement and work-placements [In special edition: Employability, Employer Engagement and Enterprise in the GEES Disciplines]. Planet, 21, 16-20.

Kim, J.W., Jelger, P., Wang, P., Sahu, J.K., Laurell, F. and Clarkson, W.A. (2008) Wavelength selection in high-power cladding-pumped Er, Yb and Yb fibre lasers using volume Bragg gratings. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Kim, J.W., Sahu, J.K. and Clarkson, W.A. (2008) Efficient single-axial-mode operation of an Er:YAG ring laser at 1645 nm. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Kim, J.W., Yarrow, M.J. and Clarkson, W.A. (2006) High power single-frequency continuous-wave Nd:YVO4 master-oscillator power amplifier. Applied Physics B, 85, (4), 539-543. (doi:10.1007/s00340-006-2380-1).

Klein, Richard J.T., Nicholls, Robert J. and Thomalla, Frank (2003) Resilience to natural hazards: how useful is this concept? Global Environmental Change Part B: Environmental Hazards, 5, (1-2), 35-45. (doi:10.1016/j.hazards.2004.02.001).

Komura, S., Furukawa, M., Horita, Z., Nemoto, M. and Langdon, T.G. (2001) Optimizing the procedure for equal-channel angular pressing for maximum superplasticity. Materials Science and Engineering: A, 297, (1-3), 111-118. (doi:10.1016/S0921-5093(00)01255-7).

Koukoulas, S., Nicholls, R.J., Dickson, M.E, Walkden, M., Hall, J.W, Pearson, S.G, Mokrech, M. and Richard, J. (2005) A GIS tool for analysis and interpretation of coastal erosion model outputs (SCAPEGIS). In, Coastal Dynamics 2005. 5th International Conference on Coastal Dynamics Virginia, USA, American Society of Civil Engineers.

Kouloumentas, C., Provost, L., Parmigiani, F., Tsolakidis, S., Petropoulos, P., Tomkos, I. and Richardson, D.J. (2008) Four-channel all-fibre dispersion-managed 2R regenerator. IEEE Photonics Technology Letters, 20, (13), 1169-1171. (doi:10.1109/LPT.2008.924896).

Krasavin, A.V., Schwanecke, A.S. and Zheludev, N.I. (2005) Polarization controlled nano-focusing. In, International Conference on Quantum Electronics 2005 and the Pacific Rim Conference on Lasers and Electro-Optics 2005 (IQEC/CLEO-PR 2005), Tokyo, Japan, 11 - 15 Jul 2005.

Krivtsov, V., Dacombe, P., Kozenko, E.P., Zotova, E.A, Pak, L.N., Heaven, S. and Banks, C.J. (2008) Contemporary applications of the interdisciplinary waste management research: Case studies of algal biodiversity in the WSP and energy footprint of municipal wastes. International Journal of Energy, Environment, and Economics, 15, (3-4), 183-204.

Kundys, D. O., Gates, J. C., Major, H. E., Gawith, C. B. E. and Smith, P. G. R. (2008) Direct UV-written near-visible planar Bragg gratings and their application in sensors. In, Frontiers in Optics 2008 and Laser Science (FiO/LS) XXIV Conference, Rochester, New York, USA, 19 - 23 Oct 2008.

Labbe, D.F.L. and Wilson, P.A. (2006) A numerical investigation of the effects of the spanwise length on the three-dimensional wake of a circular cylinder. In, Fourth Conference on Bluff Body Wakes and Vortex-Induced Vibrations, 21-24 June 2005,

Lagatsky, A.A., Rafailov, E.U., Sarmani, A.R., Brown, C.T.A., Sibbett, W., Ming, L. and Smith, P.G.R. (2005) Efficient femtosecond green-light source with a diode-pumped mode-locked Yb3+:KY(WO4)2 laser. Optics Letters, 30, (10), 1144-1146.

Langdon, T.G. (2001) Creep of single-phase alloys. In, Buschow, K.H.J., Cahn, R.W., Flemings, M.C., Ilschner, B., Kramer, E.J. and Mahajan, S. (eds.) Encyclopedia of materials: science and technology. , Elsevier, 1817-1822.

Langdon, T.G. (2002) Creep processes at low stress levels. In, Mishra, R.S., Earthman, James C. and Raj, Sai V. (eds.) Creep deformation: fundamentals and applications : proceedings of a symposium. Symposium held during the 2002 TMS Annual Meeting in Seattle Warrendale, USA, The Minerals, Metals & Materials Society, 41-50.

Langdon, T.G. (2003) Grain boundary sliding in creep and superplasticity: the Gifkins Decades and twenty-five years later. Materials Australia: The Magazine Of Engineering Materials Technology, 35, 5-8.

Law, L., Yang, Y. and Beduz, C. (1997) The local variation of Ca2PbO4 in the core of (Pb,Bi)2Sr2Ca2Cu3Ox superconducting tapes during thermal processing with different heating rates. Physica C: Superconductivity, 282-287, (4), 2555-2556. (doi:10.1016/S0921-4534(97)01373-7).

Lawal, A.A. and Sandham, N.D. (2001) Direct simulation of transonic flow over a bump. In, Geurts, B.J., Friedrich, Rainer and Métais, Olivier (eds.) Direct and large-eddy simulation IV. , Springer, 301-310. (ERCOFTAC Series 8).

Lazaro, J. M., Cubillas, A. M., Silva-Lopez, M., Conde, O. M., Petrovich, M. and Lopez-Higuera, J. M. (2008) Methane sensing using multiple-coupling gaps in hollow-core photonic bandgap fibers. In, 19th International Conference on Optical Fibre Sensors (OFS19), Perth, Australia, 14 - 18 Apr 2008.

Leary, S.J., Bhaskar, A. and Keane, A.J. (2002) Screening and approximation methods for efficient structural optmization. In, 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Georgia, 04 - 06 Sep 2002. , 1-11.

Lee, K.K., Harris, C.J., Gunn, S.R. and Reed, P.A.S. (2001) A case study of SVM extension techniques on classification of imbalanced data. In, International Conference on Neural Networks and Applications, Puerto de la Cruz, Spain, , 309-314.

Lee, Keumsook and Song, Yena (2009) Time-space analysis for the hub and cluster structures of transit passenger flows in the metropolitan Seoul. In, American Association of Geographers Annual Meeting, 2009, Las Vegas, USA, 22 - 27 Mar 2009.

Lee, M. (2002) Assessment of fatigue lives of offshore structures. In, Towards a Better Built Environment - Innovation, Sustainability, Information Technology. IABSE Symposium , International Association for Bridge and Structural Engineering, 254.

Lee, M. (2004) Behaviour of minimum structure platforms under ship impact. In, 23rd International conference on Offshore Mechanics and Arctic Engineering, Vancouver, Canada, 20 - 24 Jun 2004.

Lee, M. (2004) Analysis of offshore structures subjected to various types of sea waves. In, 23rd International Conference on Offshore Mechanics and Arctic Engineering, Vancouver, Canada, 20 - 24 Jun 2004.

Lee, M. (2004) Maximum interfacial stresses in beams strengthened with composite plates. In, Metropolitan Habitats and Infrastructure. IABSE Conference 2004 , IABSE, 310-311.

Lee, M. and Gazzola, F. (2002) Design equation for overlap tubular K-joints under in-plane bending. In, Towards a Better Built Environment - Innovation, Sustainability, Information Technology. IABSE Symposium , International Association for Bridge and Structural Engineering, 428.

Lee, M. and Llewelyn-Parry, A. (2003) Strength estimation of offshore ring-stiffened DT-joints. In, Tubular Structures X: Proceedings of the 10th International Symposium. 10th International Symposium on Tubular Structures , A.A.Balkema, 245-252.

Lee, S., Akamatsu, H., Utsunomiya, A., Neishi, K., Furukawa, M., Horita, Z. and Langdon, T.G. (2001) Superplasticity of ultrafine-grained Al-Mg-Sc-Zr alloys produced by equal-channel angular pressing. In, Chandra, T., Higashi, K., Suryanarayana, C. and Tome, C. (eds.) THERMEC 2000 - International Conference on Processing and Manufacturing of Advanced Materials. International Conference on Processing and Manufacturing of Advanced Materials Oxford, UK, Elsevier.

Leong, J.Y.Y., Petropoulos, P., Price, J.H.V., Ebendorff-Heidepriem, H., Asimakis, S., Moore, R.C., Frampton, K.E., Finazzi, V., Feng, X., Monro, T.M. and Richardson, D.J. (2005) Broadband supercontinuum generation in an extremely nonlinear extruded lead silicate holey fiber using weak fs pulses. In, CLEO- Pacific Rim 2005, Tokyo, Japan, 11 - 15 Jul 2005. , 2pp.

Lewis, H.G. and Brown, M. (2001) A generalized confusion matrix for assessing area estimates from remote sensing imagery. International Journal of Remote Sensing, 22, (16), 3223-3235. (doi:10.1080/01431160152558332).

Lewis, H.G., Swinerd, G.G., Williams, N. and Gittins, G. (2001) DAMAGE: a dedicated GEO debris model framework. In, Proceedings of the Third European Conference on Space Debris. 3rd European Conference on Space Debris Noordwijk, Netherlands, The European Space Agency (ESA), 373-378. (European Space Agency Special Publication 473).

Li, Qinling and Coleman, Gary N. (2003) DNS of an oblique shock wave impinging upon a turbulent boundary layer. In, Friedrich, Rainer, Geurts, Bernard J. and Métais, Olivier (eds.) Direct and Large-Eddy Simulation V. DLES-5: 5th International ERCOFTAC Workshop on Direct and Large-Eddy Simulation The Netherlands, Kluwer Academic, 387-396. (ERCOFTAC Series 9).

Liu, J., Mwanza, M.C., Reed, P.A.S. and Syngellakis, S. (2001) Assessment of local elastic-plastic properties in an aluminium bearing alloy. In, Proceedings of the Seventh Postgraduate Conference in Engineering Materials, Southampton, UK, 2000. Southampton, UK, University of Southampton2pp, 7-8.

Luo, K.H. (2001) DNS and LES of Turbulence-Combustion Interactions. In, Geurts, Bernard J. (ed.) Modern simulation strategies for turbulent flow. , R.T. Edwards, 263-295.

Luo, K.H. (2004) Enhancement of mixing and combustion in buoyant non-circular plumes. In, Friedrich, Rainer, Geurts, B.J. and Métais, Olivier (eds.) Direct and large-eddy simulation V: proceedings of the fifth international ERCOFTAC workshop on direct and large-eddy simulation. Fifth international ERCOFTAC workshop on direct and large-eddy simulation , Springer, 375-384. (ERCOFTAC Series 9).

Luo, K.H. and Zhou, X. (2001) Large-eddy simulation of variable-density turbulent flows impinging on wall plates and cavity enclosures. In, Geurts, Bernard J., Friedrich, Rainer and Métais, Olivier (eds.) Direct and Large-Eddy Simulation IV. DLES4: 4th International ERCOFTAC Workshop on Direct and Large-Eddy Simulation The Netherlands, Kluwer Academic, 245-252. (ERCOFTAC Series 9). (2614).

MacDonald, K.F., Denisyuk, A.I., Jonsson, F., Soares, B.F., Bashevoy, M.V. and Zheludev, N.I. (2008) Nanophotonics under the electron microscope. In, 6th International Workshop on Nanophotonics, Taipei, 11 Mar 2008. (Submitted).

MacDonald, K.F., Krasavin, A.V., Soares, B.F., Bashevoy, M.V., Jonsson, F. and Zheludev, N.I. (2006) Nonlinear plasmonics in a gallium/aluminium nano-composite. In, QEP-17 at Photon06, Manchester, UK, 04 - 07 Sep 2006.

MacDonald, K.F., Krasavin, A.V. and Zheludev, N.I. (2005) Ga-Al and Ga-Ag nano-structured films for active plasmonics applications. In, International Conference on Quantum Electronics 2005 and the Pacific Rim Conference on Lasers and Electro-Optics 2005 (IQEC/CLEO-PR 2005), Tokyo, Japan, 11 - 15 Jul 2005.

MacDonald, K.F., Soares, B.F., Fedotov, V.A., Bashevoy, M.V. and Zheludev, N.I. (2005) Nanowatt photonics of structural transformations in a single nanoparticle. In, International Conference on Quantum Electronics 2005 and the Pacific Rim Conference on Lasers and Electro-Optics 2005 (IQEC/CLEO-PR 2005), Tokyo, Japan, 11 - 15 Jul 2005.

MacDonald, K.F., Soares, B.F. and Zheludev, N.I. (2004) Nanowatt photonics of structural transformations in a single nanoparticle. In, Photon '04 / QEP-16, Glasgow, UK, 06 - 09 Sep 2004.

Maharjan, M.R., Dhakal, T.R., Thapa, S.K., Schreckenberg, K. and Luttrell, C. (2009) Improving the benefits to the poor from community forestry in the Churia region of Nepal. International Forestry Review, 11, (2), 254-267. (doi:10.1505/ifor.11.2.254).

Major, H.E., Gawith, C.B.E. and Smith, P.G.R. (2008) Gouy phase compensated quasi phase matching (GQPM). In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Markvart, T. (2001) Solar electricity for the third millennium (feature article). Photovoltaics Bulletin: Elsevier Advanced Technology, (1), 7-11.

Markvart, T. (2006) Detailed balance method for ideal single-stage fluorescent collectors. Journal of Applied Physics, 99, (026101), 1-3. (doi:10.1063/1.2160710).

Markvart, T. and Castaner, L. (2003) Principles of solar cell operation. In, Markvart, T. and Castaner, L. (eds.) Practical handbook of photovoltaics: from fundamentals to applications. , Elsevier, 71-94.

Markvart, T. and Landsberg, P.T. (2000) Solar cell model for electron transfer in photosynthesis. In, 12th Workshop on Quantum Solar Energy Conversion (QUANTSOL 2000), Wolkenstein, Italy, 11 - 18 Mar 2000.

Marsden, G., Brackstone, M.A. and McDonald, M. (2001) Assessment of the Stop and Go function using real driving behaviour. In, International Conference on Advanced Driver Assistance Systems, (ADAS 2001). Proceedings of the Advanced Driver Assistance Systems ADAS 2001 Conference , IEEE Press, 76-80.

Marth, R., Muller, G.U., Klavzar, A., Wolters, G., Alsop, W. and Bruce, T. (2005) Analysis of blockwork coastal structures. In, McKee Smith, J. (ed.) Proceedings of the 29th International Conference Coastal Engineering 2004. 29th International Conference Coastal Engineering 2004 , World Scientific, 3878-3890. (doi:10.1142/9789812701916_0313).

Martin, C., Lewis, H.G. and Walker, R. (2001) Studying the MEO and GEO space debris environments with the integrated debris evolution suite (IDES) model. In, Proceedings of the Third European Conference on Space Debris. 3rd European Conference on Space Debris Noordwijk, Netherlands, The European Space Agency (ESA), 351-354. (European Space Agency Special Publication 473).

Matsubara, K., Utsunomiya, A., Furukawa, M., Horita, Z. and Langdon, T.G. (2001) Superplasticity of aluminum alloys containing various solid solution elements processed using equal-channel angular pressing. In, Hanada, S., Zhong, Z., Nam, S.W. and Wright, R.N. (eds.) The Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). Fourth Pacific Rim International Conference on Advanced Materials and Processing Sendai, Japan, Japan Institute of Metal, 2003-2006. (2905).

Maughan, S.M. (2002) Distributed fibre sensing using microwave heterodyne detection of spontaneous Brillouin backscatter. University of Southampton, Faculty of Engineering and Applied Science, Optoelectronic Research Centre, Doctoral Thesis .

May-Smith, T.C., Muir, A.C., Darby, M.S.B. and Eason, R.W. (2008) Design and performance of a ZnSe tetra-prism for homogeneous substrate heating using a CO2 laser for pulsed laser deposition experiments. Applied Optics, 47, (11), 1767-1780. (doi:10.1364/AO.47.001767).

McDermott, M.H. and Schreckenberg, K. (2009) Equity in community forestry: insights from North and South. International Forestry Review, 11, (2), 157-170. (doi:10.1505/ifor.11.2.157).

McDonald, M. (2008) The next 40 years? In, The 40th Annual Universities Transport Study Group (UTSG), Southampton, UK, 03 - 05 Jan 2008.

McDonald, M., Espie, S. and van der Berg, J.P. (2002) Stardust: a research on deployment of urban sustainable transport systems. In, 9th World Congress on Intelligent Transport Systems, Chicago, USA, 14 - 17 Oct 2002.

McDonald, M., Jeffery, D., Li, Y. and Zheng, P. (2006) Automatic Incident Detection at the National Traffic Control Centre. In, 13th World Congress on Intelligent Transport Systems and Services, London, UK, 08 - 12 Oct 2006.

McLeod, F N., Cherrett, T.J. and Song, L. (2005) Missed another home delivery? The potential for local collect points. In, Logistics Research Network Annual Conference, Plymouth, UK, Sep 2005. , 277-282.

McLeod, F. N. and Hounsell, N. B. (2003) Results from the PRISCILLA Bus Priority Project. In, 10th World Congress on Intelligent Transport Systems and Services, Madrid, Spain, 16 - 20 Nov 2003.

McMichael, A., Campbell-Lendrum, D.H., Kovats, R.S., Nicholls, R. J., Edwards, S., Wilkinson, P. and Wilson, T. (2004) Global climate change. In, Majid, E., Lopez, A.D., Rodgers, A.A. and Murray, C.J.L (eds.) Comparative quantification of health risks : global and regional burden of disease attributable to selected major risk factors. Geneva, Switzerland, World Health Organisation, pp1543-1650.

McNelley, T.R., Swisher, D.L., Horita, Z. and Langdon, T.G. (2002) Influence of processing route on microstructure and grain boundary development during equal-channel angular pressing of pure aluminum. In, Zhu, Y.T., Langdon, T.G., Mishra, R.S., Semitian, S.L., Saran, M.J. and Lowe, T.C. (eds.) Ultrafine grained materials II. 2002 TMS Annual Meeting and Exhibition , Minerals, Metals & Materials Society, 15-24.

Meunier, M. and Shenoi, R.A., Wilson, P.A. and Hearn, G.E. (eds.) (2001) Transient analysis of FRP sandwich panels used in High Performance Craft. Proceedings of the 6th International Conference on Fast Sea Transportation, FAST2001, Southampton, 3 (doi:10.3940/rina.ft.2001.74).

Miyahara, Y., Matsubara, K., Makii, K., Horita, Z. and Langdon, T.G. (2003) Two-step process of extrusion and equal-channel angular pressing for grain refinement in Mg Alloys. In, Proceeedings of the 2nd International Symposium on Ultrafine Grained Structures, Victoria, Australia, 11 - 13 Nov 2003.

Moisen, Gretchen G., Edwards, Jr., Thomas C. and Osborne, Patrick E. (2006) Further advances in predicting species distributions. Ecological Modelling, 199, (2), 129-131. (doi:10.1016/j.ecolmodel.2006.05.015).

Mokrech, M., Nicholls, R.J., Richards, J.A., Henriques, C., Holman, I.P. and Shackley, S. (2008) Regional impact assessment of flooding under future climate and socio-economic scenarios for East Anglia and North West England. Climatic Change, 90, (1-2), 31-55. (doi:10.1007/s10584-008-9449-2).

Molland, A.F., Wellicome, J.F., Temarel, P., Cic, J. and Taunton, D.J. (2001) Experimental investigation of the seakeeping characteristics of fast displacement catamarans in head and oblique seas. Transactions of the Royal Institution of Naval Architects, 143, 78-97.

Morris, S., Wood, R.J.K., Harvey, T.J. and Powrie, H.E.G. (2003) Electrostatic charge monitoring of unlubricated sliding wear of a bearing steel. Wear, 255, (1-6), 430-443. (doi:10.1016/S0043-1648(03)00089-9).

Moy, S.S.J., Clarke, H. and Bright, S.R. (2009) The engineering properties of Victorian structural wrought iron. Proceedings of the ICE - Construction Materials, 162, (1), 1-10. (doi:10.1680/coma.2009.162.1.1).

Muggleton, J.M., Allen, R. and Chappell, P. (1999) Hand and arm injuries associated with repetitive manual work in industry: a review of disorders, risk factors and preventive measures. Ergonomics, 42, (5), 714-739.

Muller, G.U. and Wolter, C. (2004) The breast shot water wheel: design and model tests. Proceedings of the Institute of Civil Engineers: Engineering Sustainability, 157, (4), 203-211. (doi:10.1680/ensu.157.4.203.56897).

Muller, Gerald, Jentsch, Mark F. and Stoddart, Euan (2009) Vertical axis resistance type wind turbines for use in buildings. Renewable Energy, 34, (5), 1407-1412. (doi:10.1016/j.renene.2008.10.008).

Muskolus, Andreas, Salter, A.M. and Jones, A. (2009) Linking economic and energy modelling with environmental assessment when modelling the on-farm implementation of anaerobic digestion. In, Green Week Scientific Conference 2009. Multi-Level Processes of Integration and Disintegration, Berlin, Germany, 14 - 15 Jan 2009. Modern Agriculture in Central and Eastern Europe.

Myers, L.E. and Bahaj, A.S. (2005) Wake studies of a 1/30th scale horizontal axis marine current turbine. In, Imbabi, M. and Mitchell, P. (eds.) Proceedings of the World Renewable Energy Congress 2005. Proceedings World Renewable Energy Congress (WREC 2005) , Elsevier Science, 1205-1210.

Myers, L.E. and Bahaj, A.S., Bahaj, A.S. (ed.) (2006) Power output performance characteristics of a horizontal axis marine current turbine. Renewable Energy: Marine Energy, 31, (2), 197-208. (doi:10.1016/j.renene.2005.08.022).

Myers, L.E. and Bahaj, A.S. (2006) Flow effects in marine current turbine arrays. In, World Renewable Energy Congress 2006. World Renewable Energy Congress (WREC-IX) , Elsevier Science.

Myers, L.E. and Bahaj, A.S. (2008) The effect of boundary proximity upon the wake structure of horizontal axis marine current turbines. In, 27th International Conference on Offshore Mechanics and Arctic Engineering (OMAE 2008), Estoril, Portugal, 16 - 21 Jun 2008. The American Society of Mechanical Engineers.

Nair, P.B. (2002) Physics-based surrogate modeling of parameterized PDEs for optimization and uncertainty analysis. In, Proceedings of 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference , AIAA. (AIAA-2002-1586).

Nair, P.B. (2004) Stochastic meshfree projection scheme for flow in random porous media. In, ICFD Conference on Numerical Methods for Fluid Dynamics, Oxford, UK, 29 Mar - 01 Apr 2004.

Nair, P.B. and Keane, A.J. (2003) An approximate solution scheme for the algebraic random Eigenvalue problem. Journal of Sound and Vibration, 260, (1), 44-65. (doi:10.1016/S0022-460X(02)00899-4).

Nair, Prasanth B. (2004) Projection schemes in stochastic finite element analysis. In, Nikolaidis, Efstratios, Ghiocel, Dan M. and Singhal, Suren (eds.) Engineering design reliability handbook. , CRC Press.

Neishi, K., Horita, Z. and Langdon, T.G. (2001) Achieving superplasticity in a Cu-40% Zn alloy through severe plastic deformation. Scripta Materialia, 45, (8), 965-970. (doi:10.1016/S1359-6462(01)01119-8).

Neishi, K., Uchida, T., Yamauchi, A., Nakamura, K., Horita, Z. and Langdon, T.G. (2001) Low-temperature superplasticity in a Cu-Zn-Sn alloy processed by severe plastic deformation. Materials Science and Engineering, 307, (1-2), 23-28. (doi:10.1016/S0921-5093(00)01970-5).

Nicholls, R.J. and Mokrech, M. (2005) Towards an integrated coastal sediment dynamics and shoreline response simulator. , Tyndall Research, 50pp. (Technical Report 38).

Nicholls, R.J. and Mokrech, M. (2005) Assessing coastal flood risk at specific sites and regional scales: Regional assessment of coastal flood risk. , Tyndall Research, 63pp. (Project ID - T2.46).

Nicholls, Robert J., Wong, Poh Poh, Burkett, Virginia, Woodroffe, Colin D. and Hay, John (2008) Climate change and coastal vulnerability assesment: scenarios for integrated assessment. Sustainability Science, 3, (1), 89-102. (doi:10.1007/s11625-008-0050-4).

Nilsson, J., Jeong, Y., Codemard, C.A., Maran, J.-N., Farrell, C., Ji, J., Yoo, S., Sahu, J.K., Richardson, D.J. and Payne, D.N. (2008) High power fiber sources. In, Conference on Optoelectronics and Optical Communications (COOC) 2008, Busan, Korea, 14 - 16 May 2008.

O'Riordan, N. and Phear, A.G. (2001) Design and construction control for ballasted track formation and subgrade under high speed lines. In, Railway Engineering

O'Riordan, N., Ross, A., Allwright, R. and Le Kouby, A. (2003) Long term settlement of piles under repetitive loading from trains. In, IABSE Symposium on Structures for High-Speed Railway Transportation, Antwerp, Belgium, 27 - 29 Aug 2003.

Ong, Y.S., Keane, A. J. and Nair, P.B. (2002) Surrogate-assisted coevolutionary search. In, Wang, Lipo, Rajapakse, Jagath C., Fukushima, Kunihiko, Lee, Soo-Young and Yao, Xing (eds.) Neural Information Processing, 2002. ICONIP '02. Proceedings of the 9th International Conference on. ICONIP'02: 9th International Conference on Neural Information Processing USA, Institute of Electrical and Electronics Engineers, 1140-1145.

Osborne, P.E., Leitao, P.J and Foody, G.M (2006) Modelling species distributions using remotely sensed data. In, Advances in statistical modelling of faunal distribution: Global and local applications, Giessen, Germany, 19 - 21 Nov 2006.

Palissery, V., Taylor, M. and Browne, M. (2001) Characterisation of static and fatigue behaviour of a polyurethane foam material to model cancellous bone. In, Conference of European Society for Biomaterials 2001, London, UK, 12 - 14 Sep 2001.

Papakostas, A., Schwanecke, A.S., Potts, A., Prosvirnin, S.L., Bagnall, D.M. and Zheludev, N.I. (2004) Asymmetric diffraction from regular, quasi-random fractal planar chiral nanostructures. In, Photon '04 / QEP-16, Glasgow, UK, 06 - 09 Sep 2004.

Parmigiani, F., Ibsen, M., Ng, T.T., Provost, L., Petropoulos, P. and Richardson, D.J. (2008) An efficient wavelength converter exploiting a grating based saw-tooth pulse shaper. IEEE Photonics Technology Letters, 20, (17), 1461-1463. (doi:10.1109/LPT.2008.927887).

Parmigiani, F., Petropoulos, P., Ng, T.T., Ibsen, M. and Richardson, D.J. (2009) Applications of superstructured fibre Bragg gratings in all optical signal processing. In, 11th International Conference on Transparent Optical Networks (ICTON 2009), São Miguel, Portugal, 28 Jun - 02 Jul 2009.

Pashias, C. and Turnock, S.R. (2004) Accurate capture of lifting surface tip vortex and wake. In, 2004 UK ANSYS Conference, Stratford-upon-Avon, UK, 15 - 16 Nov 2004.

Pattenden, R.J., Turnock, S.R. and Bressloff, N.W. (2002) An experimental and computational study of three dimensional unsteady flow features found behind a truncated cylinder. In, Twenty-Fourth Symposium on Naval Hydrodynamics. 24th Symposium on Naval Hydrodynamics Washington, USA, National Academy Press, 305-321.

Pattenden, R.J., Turnock, S.R. and Bressloff, N.W. (2004) The use of detached eddy simulation in ship hydrodynamics. In, 25th Symposium on Naval Hydrodynamics, St. Johns, Canada, , 1-19.

Pearson, L., Kim, J.W., Zhang, Z., Sahu, J.K., Ibsen, M. and Clarkson, W.A. (2009) High-power single-frequency thulium-doped fiber master-oscillator power-amplifier at 1943nm. In, Conference on Lasers and Electro-Optics/International Quantum Electronics Conference (CLEO/IQEC 2009), Baltimore, USA, 2pp.

Pearson, L., Shen, D.Y., Sahu, J.K. and Clarkson, W.A. (2008) High-power widely-tunable thulium-doped fiber Master-Oscillator Power-Amplifier around 2 microns. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Pelillo, Marco, Rincon, Barbara, Raposo, Francisco, Martin, Antonio and Borja, Rafael (2006) Mathematical modelling of the aerobic degradation of two-phase olive mill effluents in a batch reactor. Biochemical Engineering Journal, 30, (3), 308-315. (doi:10.1016/j.bej.2006.05.016).

Pemberton, R., Turnock, S., Wright, A. and Blake, J.I.R. (2001) A comparison of Computational Methods for Planing Craft Hydrodynamics. In, HIPER '01, International Conference on High Performance Marine Vehicles, Hamburg, Germany, 02 - 05 May 2001.

Perdikou, P.N., Clayton, C.R.I. and Hadjimitsis, D.G. (2001) Impact of atmospheric correction on land-use classification and water demand-Aral Sea basin. In, Proceedings for Remote Sensing Photogrammetry Society Conference (RSPS 2001) 23 - 27 Apr 2001.

Perdikou, P.N., Clayton, C.R.I. and Hadjimitsis, D.G. (2002) Using time-series Landsat-7 images for estimation of cultivated areas in the Aral Sea basin, Kazakhstan. In, Proceedings of International Conference on the Protection and Restoration of the Environment VI, Skiathos, Greece, 01 - 05 Jul 2002. , 1720-1727.

Perrin, C., Harris, S., McCartney, D.G., Syngellakis, S. and Reed, P.A.S. (2004) The potential of new processing routes in Al-based plain journal bearings. In, 9th International Conference on Aluminium Alloys (ICAA9), Brisbane, Australia, 02 - 05 Aug 2004.

Petropoulos, P., Tian, C., Zhang, Z., Ibsen, M., Roelens, M.A.F., Teh, P.C. and Richardson, D.J. (2005) Applications of superstructured fibre Bragg gratings in OCDMA systems. In, NOC 2005: 10th European Conference on Networks and Optical Communications, London, UK, 05 - 07 Jul 2005. 8pp.

Poletti, F. (2009) Design trade-offs in air core bandgap fibers for telecoms applications. In, 35th European Conference on Optical Communication (ECOC 2009), Vienna, Austria, 20 - 24 Sep 2009.

Poletti, F., Feng, X., Camerlingo, A., Petrovich, M.N., Horak, P., Parmigiani, F., Petropoulos, P., Loh, W.H. and Richardson, D.J. (2009) Recent advances in highly nonlinear microstructured optical fibres. In, 14th Optoelectronics and Communications Conference (OECC 2009), Hong Kong, China, 13 - 17 Jul 2009.

Ponter, A.R.S., Afferante, L. and Ciavarella, M. (2004) A note on Merwin's measurements of forward flow in rolling contact. Wear, 256, (3-4), 321-328. (doi:10.1016/S0043-1648(03)00407-1).

Powrie, H., Wood, R., Harvey, T., Wang, L. and Morris, S. (2002) Electrostatic charge generation associated with machinery component degradation. In, IEEE Aerospace Conference Proceedings, 2002. IEEE Aerospace Conference London, UK, IEEE, 2927-2934. (doi:10.1109/AERO.2002.1036132).

Powrie, W. (2006) Editorial. Proceedings of the Institution of Civil Engineers (Waste and Resource Management), 159, (WR1), 1-2. (doi:10.1680/warm.2006.159.1.1).

Powrie, W. (2006) Editorial. Proceedings of the Institution of Civil Engineers (Waste and Resource Management), 159, (WR2), p.53. (doi:10.1680/warm.2006.159.2.53).

Powrie, W. (2006) Editorial. Proceedings of the Institution of Civil Engineers (Waste and Resource Management), 159, (WR3), p.99. (doi:10.1680/warm.2006.159.3.99).

Powrie, W. (2006) Editorial. Proceedings of the Institution of Civil Engineers (Waste and Resource Management), November 2006, 159, (WR4), p.143. (doi:10.1680/warm.2006.159.4.143).

Powrie, W. and Beaven, R.P. (2001) Modelling flow to leachate wells in landfills. In, Proceedings Sardinia 2001, 8th International Waste Management and Landfill Symposium, Cagliera, Italy, Oct 2001. , 615-622.

Powrie, W., Riley, K. and Salter, A.M. (2009) Briefing: Overview of the work of the Sue waste consortium. Proceedings of the Institution of Civil Engineers - Waste and Resource Management, 162, (3), 119-127. (doi:10.1680/warm.2009.162.3.119).

Preene, M. and Powrie, W. (2009) Ground energy systems: delivering the potential. Proceedings of the Institution of Civil Engineers, Energy, 162, (2), 77-84. (doi:10.1680/ener.2009.162.2.77).

Preston, J.M. (2005) The deregulation and privatisation of public transport in Britian: Twenty years on. In, Transport Reseach Foundation, Wokingham, UK, 05 May 2005. , p.16.

Preston, J.M. (2008) The challenge we face - and how transport economics has helped. In, Plenary paper to the Universities' Transport Study Group 40th Annnual Conference

Preston, J.M. (2008) Is Labour delivering a sustainable railway? In, Docherty, Iain and Shaw, Jon (eds.) Traffic Jam: Ten Years of 'Sustainable' Transport in the UK. Bristol, UK, Policy Press, 75-96.

Preston, J.M. and O'Connor, K. (2008) Revitalised transport geographies. In, Knowles, R., Shaw, J. and Docherty, I. (eds.) Transport Geographies: Mobilities, Flows and Spaces. , Blackwell, 227-237.

Preston, John (2008) Public transport subsidisation. In, Ison, Stephen and Rye, Tom (eds.) The Implementation and Effectiveness of Transport Demand Management Measures: An International Perspective. Aldershot, UK, Ashgate, 189-209.

Preston, John (2009) Epilogue: Transport policy and social exclusion - some reflections. Transport Policy, 16, (3), 140-142. (doi:10.1016/j.tranpol.2009.04.003).

Preston, John and Wall, Graham (2008) The ex-ante and ex-post economic and social impacts of the introduction of high-speed trains in South East England. Planning Practice and Research, 23, (3), 403-422. (doi:10.1080/02697450802423641).

Preston, John, Wall, Graham, Batley, Richard, Ibanez, Nicolas and Shires, Jeremy (2009) Impact of delays on passenger train services: evidence from Great Britain. Transportation Research Record: Journal of the Transportation Research Board, 2117, 14-23. (doi:10.3141/2117-03).

Priest, J. A. and Powrie, W. (2009) Determination of dynamic track modulus from measurement of track velocity during train passage. Journal of Geotechnical and Geoenvironmental Engineering, 135, (11), 1732-1740. (doi:10.1061/(ASCE)GT.1943-5606.0000130).

Prosvirnin, Sergey L. and Zheludev, Nikolay I. (2009) Analysis of polarization transformations by a planar chiral array of complex-shaped particles. Journal of Optics A: Pure and Applied Optics, 11, (7), 074002. (doi:10.1088/1464-4258/11/7/074002).

Provost, Lionel A., Petropoulos, Periklis and Richardson, David J. (2009) Optical WDM regeneration: status and future prospects. In, Optical Fiber Communication Conference (OFC 2009), San Diego, USA, 21 - 25 Mar 2009.

Raposo, F., De la Rubia Romero, M.A. and Borja, R. (2008) Methylene blue number as useful indicator to evaluate the adsorptive capacity of granular activated carbon in batch mode: Influence of adsorbate/adsorbent mass ratio and particle size. Journal of Hazardous Material, 165, (1-3), 291-299. (doi:10.1016/j.jhazmat.2008.09.106).

Rawson, S.A., Fauroux, B. and McDonald, P.C. (2002) Compact 77K cryogenic LNA design. , University of Southampton, 42pp. (Study report, (ESA 15483/01/D/SW) ).

Rawson, S.A. and McDonald, P.C. (2003) Ka-band LNA subsystem for DSA2 - design report. , European Space Agency (38).

Reino, Luis, Beja, Pedro, Osborne, P.E., Morgado, Rui, Fabião, António and Rotenberry, John (2009) Distance to edges, edge contrast and landscape fragmentation: Interactions affecting farmland birds around forest plantations. Biological Conservation, 142, (4), 824-838. (doi:10.1016/j.biocon.2008.12.011).

Rice, Stephen P. (2009) State of Science - Experimentation at the interface of fluvial geomorphology, stream ecology and hydraulic engineering and the development of an effective, interdisciplinary river science. Earth Surface Processes and Landforms, 35, (1), 64-77. (doi:10.1002/esp.1838).

Richards, D.J., Rattley, M.J., Lehane, B.M. and Gaudin, C. (2005) An experimental study and numerical study of rate effects for plate anchors in clay. In, Proceedings of the First International Symposium on Frontiers in Offshore Geotechnics, University of Western Australia, Australia, 19 - 21 Sep 2005. , 197-203.

Richards, D.J. and Smallman, D.J. (2004) A preliminary analysis of factors affecting the rate and magnitude of secondary settlement of landfill waste. In, Waste 2004 Proceedings. Waste 2004. 3rd International Conference on Integrated Waste Management and Pollution Control: Policy & Practice, Research & Solutions , Waste Conference Ltd, 633-642.

Richards, J., Mokrech, M., Berry, P.M. and Nicholls, R.J. (2008) Regional assessment of climate change impacts on coastal and fluvial ecosystems and the scope for adaptation. Climatic Change, 90, (1-2), 141-167. (doi:10.1007/s10584-008-9451-8).

Richardson, D.J. (2007) The diversity of fibre laser technology. In, European Conference on Lasers and Electro-Optics, 2007 and the International Quantum Electronics Conference. CLEOE-IQEC 2007. European Conference on Lasers and Electro-Optics, 2007 , IEEE. (doi:10.1109/CLEOE-IQEC.2007.4386512).

Riziotis, C. and Zervas, M.N. (2003) Novel full-cycle-coupler-based optical add-drop multiplexer and performance characteristics at 40-Gb/s WDM Networks. IEEE Journal of Lightwave Technology, 21, (8), 1828-1837. (doi:10.1109/JLT.2003.815501).

Rogacheva, A.V., Fedotov, V.A., Schwanecke, A.S. and Zheludev, N.I. (2006) Giant gyrotropy in bi-layered chiral structures. In, QEP-17 at Photon06, Manchester, UK, 04 - 07 Sep 2006.

Rometsch, P.A. and Schaffer, G.B. (2002) An age hardening model for Al–7Si–Mg casting alloys. Materials Science and Engineering A, 325, (1-2), 424-434. (doi:10.1016/S0921-5093(01)01479-4).

Rona, A. and Zhang, X. (2004) Time accurate numerical study of turbulent supersonic jets. Journal of Sound and Vibration, 270, (1-2), 297-321. (doi:10.1016/S0022-460X(03)00537-6).

Rossington, S.K., Nicholls, R.J., Knaapen, M.A.F. and Wang, Z.B. (2007) Morphological behaviour of UK estuaries under conditions of accelerating sea-level rise. In, River, coastal and estuarine morphodynamics, Enchede, Netherlands, 2007.

Rutt, H.N. and Xin, Z.-J. (1999) New sources for real applications in the far infrared. In, 5th International Workshop on Advanced Infrared Technology and Applications, Venice, Italy, 29 - 30 Sep 1999.

Sahu, J.K., Yoo, S., Boyland, A.J., Kalita, M.P., Basu, C., Webb, A.S., Sones, C.L., Nilsson, J. and Payne, D.N. (2008) 488 nm irradiation induced photodarkening study of Yb-doped aluminosilicate and phosphosilicate fibers. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Salmon, Paul M., Stanton, Neville A., Walker, Guy H. and Jenkins, Daniel P. (2008) What really is going on? Review of situation awareness models for individuals and teams. Theoretical Issues in Ergonomics Science, 9, (4), 297-323. (doi:10.1080/14639220701561775).

Sandham, N.D. (2001) A review of progress on direct and large-eddy simulation. In, Geurts, Bernard J. (ed.) Modern simulation strategies for turbulent flow. , R.T. Edwards, 1-20.

Sasaki, D., Keane, A.J. and Shahpar, S. (2006) Multiobjective evolutionary optimization of a compressor stage using a grid-enabled environment. In, 44th AIAA Aerospace Sciences Meeting and Exhibit: AIAA-2006-340, Reno, Nevada, 09 - 12 Jan 2006. Reno, Nevada, USA, AIAA, 1-18.

Schoon, J.G. (2004) Observation-reaction times of wheelchair users: a comparison with non-disabled users. In, 36th Annual Meeting of the Universities' Transport Study Group, Newcastle, UK, Jan 2004.

Schreckenberg, K. and Luttrell, C. (2009) Participatory forest management: a route to poverty reduction? International Forestry Review, 11, (2), 221-238. (doi:10.1505/ifor.11.2.221).

Schreckenberg, Kate and Bird, Neil (2008) Developmental impacts of forest sector verification systems. In, Brown, David, Schreckenberg, Kate, Bird, Neil, Cerruti, Paolo, Del Gatto, Filippo, Diaw, Chimere, Fomété, Tim, Luttrell, Cecilia, Navarro, Guillermo, Oberndorf, Rob, Thiel, Hans and Wells, Adrian (eds.) Legal Timber: Verification and Governance in the Forest Sector. London, UK, Overseas Development Institute, 247-253.

Schwanecke, A., Chen, Y., Fedotov, V.A., Khardikov, V.V., Prosvirnin, S. and Zheludev, N. (2006) Optical magnetic mirror. In, QEP-17 at Photon06, Manchester, UK, 04 - 07 Sep 2006.

Senior, J., Muller, G.U. and Wiemann, P. (2007) The development of the rotary hydraulic pressure machine. In, 32nd IAHR Conference 2007, Venice, Italy, 01 - 06 Jul 2007.

Shaw, P.J. (2002) Recycling in a London Borough: perceptions, participation and barriers to the use of survival bags. In, Lencioni, E. (ed.) Waste 2002 - Integrated Waste Management and Pollution Control: Research, Policy and Practice. Waste 2002 , Waste Conference Ltd.

Shaw, P.J., Lyas, J.K., Maynard, S. and van Vugt, M. (2007) On the relationship between set-out rates and participation ratios as a tool for enhancement of kerbside household waste recycling. Journal of Environmental Management, 83, (1), 34-43. (doi:10.1016/j.jenvman.2006.01.012).

Shen, D.Y., Sahu, J.K. and Clarkson, W.A. (2006) Power scaling of continuous-wave and Q-switched hybrid fiber-bulk erbium lasers at 1645 nm. In, Europhoton 2006, Pisa, Italy, 10 - 15 Sep 2006.

Shen, D.Y., Sahu, J.K. and Clarkson, W.A. (2006) High-power widely tunable Tm:fibre lasers pumped by an Er, Yb co-doped fibre laser at 1.6 microns. Optics Express, 14, (13), 6084-6090.

Shenoi, R.A. and Blake, J.I.R. (2002) Damage Mechanics of FRP Ship Structures. In, Proceedings of the International Conference on Ship and Ocean Technology, SHOT’02. International Conference on Ship and Ocean Technology, SHOT’02 Kharagpur, India, Indian Institute of Technology. (2138).

Shenoi, R.A., Dulieu-Barton, J.M., Jeong, H.K., Winkle, I.E., Day, A.H. and Boyd, S.W. (2002) Use of pre-formed composites for cost-effective fast marine craft construction. , University of Southampton

Shepherd, D. P., Daga, N. K., Geng, R., Hung, H. S. S. and Prawiharjo, J. (2008) Adaptive pulse shaping of ultrafast mid-IR optical parametric oscillators. In, LPHYS '08 17th International Laser Physics Workshop, Trondheim, Norway, 30 Jun - 04 Jul 2008.

Shirakawa, A., Codemard, C., Ji, J., Chen, K.K., Malinowski, A., Richardson, D.J., Sahu, J.K. and Nilsson, J. (2008) High-brightness 210 micro Joule pulsed Raman fiber source. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Shur, V., Chernykh, A.P., Nikolaeva, E.V., Shishkin, E.I., Shur, A.G., Terabe, K., Kurimura, S., Kitamura, K. and Gallo, K. (2005) Shapes of isolated domains and field induced evolution of regular and random 2D domain structures in LiNbO3 and LiTaO3. In, Proc. 8th International Symposium on Ferroic Domains and Micro-to Nanoscopic Structures, Tsukuba, Japan, 24 - 27 Aug 2005.

Shur, V., Shishkin, E.I., Baturin, I.S., Chernykh, A.P., Kuznetsov, D.K., Lobov, A.I., Shur, A.G., Dolbilov, M.A., Kurimura, S., Kitamura, K. and Gallo, K. (2005) High resolution investigation of the domain kinetics in lithium niobate and lithium tantalate single crystals. In, Materials of Nanophysics and Nanoelectronics International Symposium, Nizhny Novgorod, Russia, 25 - 29 Mar 2005. , 2 pp.

Simoes, A., Powrie, W. and Smallman, D.J. (2004) Natural attenuation of chlorinated benzenes in landfill leachate by clay. In, 4th BGA Geoenvironmental Engineering Conference, Stratford-on-Avon, UK, Jun 2004.

Simoes, J.A., Morias, A., Monteiro, J., Vaz, M.A. and Taylor, M. (2001) Numerical and experimental investigation of bone-implant interfaces. Journal of Biomechanics, 34, (Supplement 1), s85-s86. (doi:10.1016/S0021-9290(01)00129-4).

Sklenicka, V., Svoboda, M., Pahutova, M., Kucharova, K. and Langdon, T.G. (2001) Microstructural processes in creep of an AZ 91 magnesium-based composite and its matrix alloy. Materials Science and Engineering, 319-321, 741-745. (doi:10.1016/S0921-5093(01)01023-1).

Smallman, D.J. (2002) Natural attenuation of landfill leachate by clays. In, European Conference on Natural Attenuation, Heidelberg, Germany, 19 - 21 Nov 2007.

Smith, Brian J., Kundys, Dmytro, Thomas-Peter, Nicholas, Smith, P.G.R. and Wamsley, I.A. (2009) Phase-controlled integrated photonic quantum circuits. Optics Express, 17, (16), 13516-13525. (doi:10.1364/OE.17.013516).

Smith, P. G. R. (2007) Quasi-phasematching for wavelength conversion and all-optical nonlinear processing. In, CLEO/QELS Conference 2007, Baltimore, USA, 06 - 11 May 2007.

Smith, P. G. R. (2008) Quasi-phasematching for wavelength conversion and all-optical nonlinear processing. In, 2008 Conference on Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference (CLEO/QELS and PhAST), San Jose, 04 - 09 May 2008.

Smith, P.G.R., Emmerson, G.D., Gawith, C.B.E., Watts, S.P., Williams, R.B., Guilhot, D.A., Sparrow, I.J.G. and Adikan, M.F.R. (2005) All-UV written integrated glass devices including planar Bragg gratings and lasers. In, International Conference on Optics & Optoelectronics - ICOL 2005, Uttaranchal, India, 12 - 15 Dec 2005. , 9 pp.

So, Sik, Mackenzie, Jacob I., Shepherd, David P., Clarkson, William A., Betterton, John G., Gorton, Eric K. and Terry, John A. C. (2006) Power-scalable Ho:YAG slab laser intracavity side-pumped by a Tm:YLF slab laser. In, ASSP 2006: 21st Annual Conference on Advanced Solid-State Photonics (Topical Meeting and Tabletop Exhibit), Lake Tahoe, USA, 29 Jan - 01 Feb 2006. 3pp.

Soares, B.F., Bashevoy, M.V., MacDonald, K.F., Jonsson, F. and Zheludev, N.I. (2006) A nanoparticle as a bit of optical memory. In, QEP-17 at Photon06, Manchester, UK, 04 - 07 Sep 2006.

Soares, B.F., Jonsson, F., MacDonald, K.F., Denisyuk, A.I. and Zheludev, N.I. (2006) Dynamic structural equilibrium in self-assembled nanoparticles at the fiber tip: probing with second harmonic generation. In, QEP-17 at Photon06, Manchester, UK, 04 - 07 Sep 2006.

Sones, C.L., Muir, A.C., Mailis, S. and Eason, R.W. (2006) Ultraviolet light induced single step all-optical poling in lithium niobate. In, Central Laser Facility - Rutherford Appleton Laboratory (Annual Report 2006/2007). Ardington, UK, Ampersand Design Ltd, 151-153.

Spearing, S.M., Beaumont, P.W.R. and Ashby, M.F. (1991) Fatigue damage mechanics of notched graphite: epoxy laminates. In, Composite Materials: Fatigue and Fracture. Third Symposium on Composite Materials: Fatigue and Fracture Ann Arbor, USA, American Society for Testing of Materials, 596-616. (doi:10.1520/STP17739S).

Spigarelli, S., Cabibbo, M., Evangelista, E. and Langdon, T.G. (2001) Creep behaviour of an Al-2024 PM-15% SiC composite. In, Parker, D.J. (ed.) Creep and fracture of engineering materials and structures: Proceedings of the 9th international conference. 9th International Conference on Creep and Fracture of Engineering Materials and Structures Cambridge, UK, Woodhead Publishing Limited, 271-280.

Spigarelli, S., Evangelista, E. and Cerri Langdon, T.G. (2001) Constitutive equations for hot deformation of an Al-6061/20% Al2O3 composite. Materials Science and Engineering, 319-321, 721-725. (doi:10.1016/S0921-5093(01)01071-1).

Spigarelli, S., Gariboldi, E. and Langdon, T.G. (2001) High temperature deformation of an Al 6061-Al2O3 particulate metal matrix composite. In, Parker, D.J. (ed.) Creep and fracture of engineering materials and structures: Proceedings of the 9th international conference. 9th International Conference on Creep and Fracture of Engineering Materials and Structures Cambridge, UK, Woodhead Publishing Group, 291-298.

Spiller, D. M., Al-Mosawi, M. K., Yang, Y., Beduz, C. and Riddle, R. (1995) The effect of heating rate on the 2223 phase formation and core morphology of (Pb,Bi)2223 superconducting tapes. In, Applied Superconductivity 1995. Proceedings of EUCAS 1995, the Second European Conference on Applied Superconductivity. Proceedings of 2nd European Conference on Applied Superconductivity Edinburgh, UK, Institute of Physics, 387-390. (Institute of Physics Conference series).

Srikar, V.T., Turner, Kevin T., Ie, Tze Yung Andrew and Spearing, S. Mark (2004) Structural design considerations for micromachined solid oxide fuel cells. Journal of Power Sources, 125, (1), 62-69. (doi: 10.1016/j.jpowsour.2003.07.002).

Stanton, Neville, Salmon, Paul, Walker, Guy and Jenkins, Daniel (2009) Genotype and phenotype schemata and their role in distributed situation awareness in collaborative systems. Theoretical Issues in Ergonomics Science, 10, (1), 43-68. (doi:10.1080/14639220802045199).

Stanton, Neville A. and Salmon, Paul M. (2009) Human error taxonomies applied to driving: A generic driver error taxonomy and its implications for intelligent transport systems. Safety Science, 47, (2), 227-237. (doi:10.1016/j.ssci.2008.03.006).

Stanton, Neville A., Salmon, Paul M., Walker, Guy H. and Jenkins, Daniel (2009) Genotype and phenotype schemata as models of situation awareness in dynamic command and control teams. International Journal of Industrial Ergonomics,, 39, (3), 480-489. (doi:10.1016/j.ergon.2008.10.003).

Stanton, Neville A., Walker, Guy H., Young, Mark S., Kazi, T.A. and Salmon, P.M. (2007) Changing drivers' minds: The evaluation of an advanced driver coaching system. Ergonomics, 50, (8), 1209-1234. (doi:10.1080/00140130701322592).

Starink, M.J. and Zahra, A.-M. (1997) An analysis method for nucleation and growth controlled reactions at constant heating rate. Thermochimica Acta, 292, (1-2), 159-168. (doi:10.1016/S0040-6031(96)03135-8).

Stark, J.P.W. and Swinerd, G.G. (2003) Mission analysis. In, Fortescue, Peter, Stark, John and Swinerd, Graham (eds.) Spacecraft systems engineering, 3rd edition. , Wiley & Sons, 111-167.

Stark, J.P.W., Swinerd, G.G. and Fortescue, P.W. (2003) Celestial mechanics. In, Stark, J.P.W., Swinerd, G.G. and Fortescue, P.W. (eds.) Spacecraft systems engineering, 3rd edition. , Wiley & Sons, 79-109.

Stark, J.P.W., Swinerd, G.G. and Tatnall, A.R.L. (2003) Introduction. In, Fortescue, Peter, Stark, John and Swinerd, Graham (eds.) Spacecraft systems engineering, 3rd edition. , Wiley & Sons, 1-9.

Stephen, N.G. (2002) On a check on the accuracy of Timoshenko's beam theory. Journal of Sound and Vibration, 257, (4), 809-812. (doi:10.1006/jsvi.2001.4236).

Stephen, N.G. and Zhang, Y. (2002) On the continuum properties of repetitive beam-like pin-jointed structures. The Journal of Strain Analysis for Engineering Design, 37, (5), 459-464.

Stive, Marcel J.F., Aarninkhof, Stefan G.J., Hamm, Luc, Hanson, Hans, Larson, Magnus, Wijnberg, Kathelijne M., Nicholls, Robert J. and Capobianco, Michele (2002) Variability of shore and shoreline evolution. Coastal Engineering, 47, (2), 211-235. (doi:10.1016/S0378-3839(02)00126-6).

Stoica, G.M., Chen, L.J., Payzant, E.A., Agnew, S.R., Lu, Y.L., Han, B.Q., Langdon, T.G. and Liaw, P.K. (2001) Deformation characteristics of Al and Mg alloys subjected to equal channel angular processing. In, Lesuer, D.R. and Srivatsan, T.S. (eds.) Modeling the Performance of Engineering Structural Materials. Proceedings of a Symposium Sponsored by the Structural Materials Division (Smd) of Tms (The Minerals, Metals & Materials Society) Held During the fall , TMS, 295-306.

Stringfellow, A., Simoes, A., Smallman, D.J., Beaven, R.P., Powrie, W. and Potter, H. (2005) Attenuation of toluene by mineral landfill liners. In, 10th International Waste Management and Landfill Symposium, Cagliari, Italy, 03 - 07 Oct 2005.

Swingler, J. (2000) The automotive connector: the influence of powering and lubricating a fretting contact interface. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automotive Engineering, 214, (6), 615-23. (541).

Swinkels, Cilia M., Jeuken, Claire M.C.J.L., Wang, Zheng B. and Nicholls, Robert J. (2009) Presence of connecting channels in the Western Scheldt Estuary. Journal of Coastal Research, 25, (3), 627-640. (doi:10.2112/06-0719.1).

Tadjouddine, M., Forth, S.A. and Keane, A.J. (2006) Adjoint differentiation of a structural dynamics solver. In, Bücker, M., Corliss, G., Hovland, P., Naumann, U. and Norris, B. (eds.) Automatic Differentiation: Applications, Theory, and Implementations. AD2004: The 4th International Conference on Automatic Differentiation , Springer, 309-319. (Lecture Notes in Computational Science & Engineering, 50).

Takebe, H., Murakami, T., Kuwabara, M. and Hewak, D.W. (2006) Preparation and properties of La2O3-Ga2S3 glass-ceramics for IR materials. Journal of Non-Crystalline Solids, 352, (23-25), 2425-2429. (doi:10.1016/j.jnoncrysol.2006.02.063).

Tan, K.S., Wood, R.J.K. and Stokes, K.R. (2003) The slurry erosion behaviour of high velocity oxy-fuel (HVOF) sprayed aluminium bronze coatings. Wear, 255, (1-6), 195-205. (doi:10.1016/S0043-1648(03)00088-7).

Taylor, M., Cotton, J.R. and Zioupos, P. (2001) A stochastic approach to simulate the variable fatigue life of cortical bone using a combined CDM and FE method. In, European Society for Biomaterials 2001 Conference, London, UK, 12 - 14 Sep 2001.

Theron, M., Clayton, C.R.I. and Best, A.I. (2003) Interpretation of side-mounted bender element results using phase shift and group velocity. In, Di Benedetto, H., Doanh, T., Geoffroy, H. and Sauz, C. (eds.) Deformation Characteristics of Geomaterials. 3rd International Symposium on Pre-Failure Deformation Characteristics of Geomaterials London, UK, Taylor & Francis, 127-132.

Thibaudeau, M. and Shenoi, R.A. (2002) Understanding flow behaviour in the resin infusion moulding process. In, Proceedings of the 10th European Conference on Composite Materials, ECCM-10. 10th European Conference on Composite Materials, ECCM-10 , European Conference on Composite Materials.

Thornton, B., Cunningham, P.R. and Dulieu-Barton, J.M. (2002) Analysis of transient loads using thermoelastic stress analysis. In, BSSM Annual Conference on Advances in Experimental Mechanics, Stratford upon Avon, UK, 27 - 29 Aug 2002. London, UK, British Society for Strain Measurement, 61-64.

Tian, C., Zhang, Z., Roelens, M.A.F., Ibsen, M., Petropoulos, P. and Richardson, D.J. (2005) Reconfigurable all-optical header recognition for packet switched networks. In, e-Photon/ONE Summer School, Pisa & Cesenatico, Italy, 30 Aug - 02 Sep 2005.

Townsend, R.J., Hill, M., Harris, N.R., White, N.M., Wood, R.J.K. and Beeby, S.P. (2004) Fluid modelling of microfluid separator channels. In, Eurosensors XVIII, Rome, Italy, Sep 2004. , 124-125.

Trask, R.S., Shenoi, R.A. and Cripps, R.M. (2002) Design approach for repair adequacy in RNLI polymer composite sandwich structures - an overview. In, Gibson, A.G. (ed.) FRC 2002: 9th International Conference on Fibre Reinforced Composites. 9th International Conference on Fibre Reinforced Composites , Conference Design Consultants.

Travieso, L., Benítez, F., Sanchez, E., Borja, R., León, M., Raposo, F. and Rincón, B. (2008) Assessment of a microalgae pond for post-treatment of the effluent from an anaerobic fixed bed reactor treating distillery wastewater. Environmental Technology, 29, (9), 985-992. (doi:10.1080/09593330802166228).

Travieso Córdoba, Lissette, Domínguez Bocanegra, Alma Rosa, Rincón Llorente, Bárbara, Sanchez Hernández, Enrique, Benítez Echegoyen, Francisco, Borja, Rafael, Raposo Bejines, Francisco and Colmenarejo Morcillo, Manuel Francisco (2008) Batch culture growth of Chlorella zofingiensis on effluent derived from two-stage anaerobic digestion of two-phase olive mill solid waste. Electronic Journal of Biotechnology, 11, (2), 1-8. (doi:10.2225/vol11-issue2-fulltext-1).

Turnock, S.R. and Querard, A.B.G. (2004) Measurements of the evolution of the wake and tip vortex of a control surface undergoing periodic motion. In, 27th American Towing Tank Conference, St. John's, Canada, 06 - 07 Aug 2004. , 1-19.

Ursache, N.M., Bressloff, N.W. and Keane, A.J. (2004) The design of post-buckled spinal structures for airfoil shape control using optimization methods. In, 5th ASMO UK / ISSMO conference on Engineering Design Optimization, Stratford upon Avon, UK, 12 - 13 Jul 2004. , 1-9.

Veldhuis, I.J.S., Richardson, R.N. and Stone, H.B.J. (2005) Hydrogen fuelled gas turbine powered high-speed container ship: A technical and economic investigation. In, FAST 2005: International Conference on Fast Sea Transportation, St-Ptersburg, Russia, 27 - 30 Jun 2005.

Veldhuis, I.J.S., Richardson, R.N. and Stone, H.B.J. (2005) Hydrogen-fuelled high-speed container ship. The Naval Architect, 108-116.

Vitanov, V.I., Voutchkov, I.I. and Bedford, G.M. (2001) Neurofuzzy approach to process parameter selection for friction surfacing applications. Surface and Coatings Technology, 140, (3), 256-262. (doi:10.1016/S0257-8972(01)01128-8).

Vlassak, J.J., Ciavarella, M., Barber, J.R. and Wang, X. (2003) The indentation modulus of elastically anisotropic materials for indenters of arbitrary shape. Journal of the Mechanics and Physics of Solids, 51, (9), 1701-1721. (doi:10.1016/S0022-5096(03)00066-8).

Voge, T. and McDonald, M. (2005) Evaluation of automated urban transport systems - user perceptions. In, 12th World Congress on Intelligent Transport Systems and Services, San Francisco, USA, Nov 2005.

Voutchkov, I.I., Jaworski, B., Vitanov, V.I. and Bedford, G.M. (2001) An integrated approach to friction surfacing process optimisation. Surface and Coatings Technology, 141, (1), 26-33. (doi:10.1016/S0257-8972(01)01127-6).

Vukovic, N., Broderick, N.G.R., Petrovich, M.N. and Brambilla, G. (2008) Novel method for the fabrication of long optical fiber tapers. IEEE Photonics Technology Letters, 20, (14), 1264-1266. (doi:10.1109/LPT.2008.926037).

Walker, Guy, Stanton, Neville A., Salmon, Paul, Jenkins, Dan, Revell, Kirstine and Rafferty, Laura (2009) Measuring dimensions of command and control using social network analysis: Extending the NATO SAS-050 model. The International C2 Journal, 3, (2), 1-46.

Walker, Guy H., Stanton, Neville A., Jenkins, Dan and Salmon, Paul (2009) From Clansman to Bowman: HFI principles for NEC system design. The International C2 Journal, 3, (2), 1-33.

Walker, Guy H., Stanton, Neville A., Jenkins, Daniel P. and Salmon, Paul M. (2009) From telephones to iPhones: Applying systems thinking to networked, interoperable products. Applied Ergonomics, 40, (2), 206-215. (doi:10.1016/j.apergo.2008.04.003).

Walker, Guy H., Stanton, Neville A., Kazi, Tara A., Salmon, Paul M. and Jenkins, Daniel P. (2009) Does advanced driver training improve situation awareness? Applied Ergonomics, 40, (4), 678-687. (doi:10.1016/j.apergo.2008.06.002).

Walker, Guy H., Stanton, Neville A., Salmon, Paul M. and Jenkins, Dan P. (2009) How can we support the commander’s involvement in the planning process? An exploratory study into remote and co-located command planning. International Journal of Industrial Ergonomics, 39, (2), 456-464. (doi:10.1016/j.ergon.2008.12.003).

Walker, Guy H., Stanton, Neville A., Salmon, Paul M. and Jenkins, Daniel P. (2009) An evolutionary approach to network enabled capability. International Journal of Industrial Ergonomics, 39, (2), 303-312. (doi:10.1016/j.ergon.2008.02.016).

Walker, Guy H., Stanton, Neville A. and Young, Mark S. (2007) What's happened to car design? An exploratory study into the effect of 15 years of progress on driver situation awareness. International Journal of Vehicle Design 2007, 45, (1-2), 266-282. (doi:10.1504/IJVD.2007.013679).

Wang, B., Wang, J., Wu, J. and Cai, B. (2005) Study on Adaptive GPS/INS Integrated Navigation System. In, 8th International IEEE Conference on Intelligent Transport Systems, Vienna, Austria, 13 - 16 Sep 2005.

Wang, Jian, Cai, Baigen and Wu, Jianping (2005) A GPS based "Virtual tag" Technology Used in Railway. In, IEEE International Conference on Service Operations, Logistics and Informatics, Beijing, China, 10 - 12 Aug 2005. 4pp, 1088-1091.

Wang, L., Wood, R.J.K., Harvey, T.J., Morris, S., Powrie, H.E.G. and Care, I. (2003) Wear performance of oil lubricated silicon nitride sliding against various bearing steels. Wear, 255, (1-6), 657-668. (doi:10.1016/S0043-1648(03)00045-0).

Wang, P., Clarkson, W.A., Shen, D.Y., Cooper, L.J. and Sahu, J.K. (2006) Novel concepts for high-power fibre lasers. In, Photonics Europe 2006, Strasbourg, France, 03 - 07 Apr 2006.

Wang, P., Cooper, L.J., Shcheslavskiy, V., Sahu, J.K. and Clarkson, W.A. (2005) Cladding-pumped ytterbium-doped helical-core fiber laser. In, ASSP 2005, Vienna, Austria, 06 - 09 Feb 2005.

Wang, S.C. and Li, Y. (2005) A new structure of Nd1+εFe4B4 phase in NdFeB magnet. Journal of Materials Science, 40, (14), 3853-3855. (doi: 10.1007/s10853-005-2554-y).

Wang, Z., Kao, T. S. and Zheludev, N. I. (2009) Fractional talbot effect in a dielectric micro-spheres array. In, CLEO/Europe-EQEC 2009 Advance Programme, Munich. Germany, 14 - 19 Jun 2009.

Wang, Z.H., Xing, J.T. and Price, W.G. (2002) An investigation of power flow characteristics of L-shaped plates adopting a substructure approach. Journal of Sound and Vibration, 250, (4), 627-648. (doi:10.1006/jsvi.2001.3956).

Wegener, Martin and Zheludev, Nikolay I (2009) Artificial chiral materials. Journal of Optics A: Pure and Applied Optics, 11, (7), 1-2. (doi:10.1088/1464-4258/11/7/070201).

Weston, P., Goodman, C., Takagi, R., Bouch, C., Armstrong, J. and Preston, J. (2006) Minimising train delays in a mixed traffic railway network with consideration of passenger delay. In, 7th World Congress on Railway Research, Montréal, Canada, 04 - 08 Jun 2006.

Wharton, J.A. and Wood, R.J.K. (2004) Influence of flow conditions on the corrosion of AISI 304L stainless steel. Wear, 256, (5), 525-536. (doi:10.1016/S0043-1648(03)00562-3).

Whitehead, Tim, Simmonds, David and Preston, John (2006) The effect of urban quality improvements on economic activity. Journal of Environmental Management, 80, (1), 1-12. (doi:10.1016/j.jenvman.2005.01.029).

Wilkinson, J.S. (2006) Optical waveguide tools for microsystems. In, 2006 Joint International Meeting of the Electrochemical Society, Cancun, Mexico, 29 Oct - 03 Nov 2006. The Electrochemical Society, 1 pp.

Williams, I.D. (2004) Performance and cost implications of a new landfill leachate treatment system. In, Waste 2004 Proceedings. Waste 2004, Integrated Waste Management and Pollution Control: Policy and Practice, Research and Solutions , Waste Conference Ltd, 509-518.

Williams, I.D. (2004) Using feedback from the public to maximise household waste recycling: a case study. In, Cristina, Zhang (ed.) Waste 2004 Proceedings. Waste 2004, Integrated Waste Management and Pollution Control: Policy and Practice, Research and Solutions , Waste Conference Ltd, 439-448.

Williams, I.D. (2005) Best practice for running civic amenity sites in England & Wales. In, Tenth International Waste Management and Landfill Symposium, Sardinia, Italy, 03 - 07 Oct 2005.

Williams, I.D. (2006) Engaging the public effectively in recycling activities: a systematic approach. In, Proceedings of the CIWM Conference, Changing the face of Waste Management, Paignton, UK, 12 - 16 Jun 2006.

Williams, I.D. (2008) Universities’ Challenge. CIWM (Chartered Institution of Wastes Management) Education and Training Supplement, 6-8.

Williams, I.D. (2008) Recycling in a densely populated urban environment. In, Waste – The Social Context ’08: Urban Issues and Solutions, Alberta, Canada, 11 - 15 May 2008.

Williams, I.D., Banks, C.J. and Heaven, S. (2006) A study of the environmental impacts of home composting. In, Waste 2006 Proceedings. Waste 2006, Sustainable Waste and Resource Management , Waste Conference Ltd, 767-774.

Williams, I.D. and Culleton, A. (2009) Manchester recycling for all: increasing participation in recycling by offering choice and alternatives to low recycling communities. In, Twelfth International Waste Management and Landfill Symposium (Sardinia 2009), S. Margherita di Pula, Italy, 05 - 09 Oct 2009.

Williams, I.D., Timlett, R. and Cherrett, T.J. (2007) Win – win with waste: experiences of co-operative arrangements between a University and local authorities. In, LARCI Seminar: Household waste: research, targets and opportunities, London, UK, 26 Oct 2007.

Winwood, K., Zioupos, P., Cotton, J.R. and Taylor, M. (2001) Measurements of plastic and elastic strains during tension and compression fatigue of ageing human cortical bone. In, Conference of European Society for Biomaterials, 2001, London, UK, 12 - 14 Sep 2001.

Wolters, G., Muller, G.U., Bullock, G., Obhrai, C., Peregrine, H. and Bredmose, H. (2005) Field and large scale model tests of wave impact pressure propagation into crack. In, McKee Smith, J. (ed.) Coastal Engineering 2004: Proceedings of the 29th International Conference. 29th International Conference on Coastal Engineering 2004 , World Scientific, 4027-4039. (doi:10.1142/9789812701916_0325).

Wood, R.J.K. (2004) Challenges of living with erosion-corrosion. In, Advanced materials for fluid machinery second international symposium. Second International Symposium on Advanced Materials for Fluid Machinery , Institution of Mechanical Engineers, 113-132.

Wood, R.J.K., Harvey, T.J., Morris, S. and Powrie, H.E.G. (2002) Electrostatic monitoring of boundary and mixed lubrication. In, Proceedings of 28th Leeds-Lyon symposium on Tribology: Boundary and mixed lubrication. 28th Leeds-Lyon Symposium on Tribology UK, Elsevier, 83-92. (Tribology Series 40).

Wood, R.J.K., Jones, T.F., Fraige, F. and Langston, P.A. (2004) Particle distribution patterns in pipeflow for modelling wear. In, Proceedings of the 16th international conference on hydrotransport. 16th International Conference on Hydrotransport , BHR Group, 595-608.

Wood, R.J.K., Jones, T.F., Ganeshalingam, J. and Miles, N.J. (2004) Comparison of predicted and experimental erosion estimates in slurry ducts. Wear, 256, (9-10), 937-947. (doi:10.1016/j.wear.2003.09.002).

Wood, R.J.K. and Speyer, A.J. (2004) Erosion-corrosion of candidate HVOF aluminium-based marine coatings. Wear, 256, (5), 545-556. (doi:10.1016/S0043-1648(03)00564-7).

Woodford, M., Stevens, G.C. and Zheludev, N.I. (2004) All optical switching at Gallium/semiconductor interfaces. In, Photon '04 / QEP-16, Glasgow, UK, 06 - 09 Sep 2004.

Wu, J. (2005) Solution for user equilibrium of transportation network with neural network. In, Fuzzy Systems and Knowledge Discovery. 1st International Conference on Natural Computation, 2nd International Conference on Fuzzy Systems and Knowledge Discovery , Springer. (Lecture Notes in Computer Science, 3613).

Wu, J. and Zhou, Y. (2006) The Research on Driver's Route Choice Behaviour in the Presence of Dynamic Traffic Information. In, 9th International IEEE Conference on Intelligent Transportation Systems, Toronto, Canada, 17 - 20 Sep 2006. , 1304-1309.

Wu, Jianping and Dong, Jingxin (2005) The GPS Data Collection and Transmission Strategy for Floating Vehicle Technology. In, IEEE International Conference on Service Operations and Logistics, and Informatics, Beijing, China, 10 - 12 Aug 2005. 3pp, 33-35.

Wu, Jianping, Sui, Yagang and Wang, Tianjiao (2009) Intelligent transport systems in China. Proceedings of the ICE - Municipal Engineer, 162, (1), 25-32. (doi:10.1680/muen.2009.162.1.25).

Xing, J.T. and Jin, J. (2004) A mixed mode function-boundary element method for the transient impact analysis of an aircraft landing on a floating structure. 9th International Symposium on Practical Design of Ships and other Floating Structures, Prads2004, 12-17 September, Lubeck-Travemunde, Germany, (edited by H. Keil and E. Lehmann), Schiffbautechnische Gesellschaft e.V. Hamburg, 819-826. (2488).

Xing, J.T. and Price, W.G. (2000) The theory of non-linear elastic ship-water interaction dynamics. Cited by Ei, Sci. Journal of Sound and Vibration, 230, (4), 877-914. (doi:10.1006/jsvi.1999.2655).

Xing, J.T. and Price, W.G. (2002) Variational principles of nonlinear fluid-solid interaction dynamics in the Arbitrary-Lagarange-Eulerian description. Proceedings of the 4th International Conference on Nonlinear Mechanics, (Editor-in-Chief: CHIEN, Wei-zang, 759-765.

Xiong, J., Shenoi, R.A. and Gao, Z.T. (2002) Small sample theory for reliability design. Journal of Strain Analysis for Engineering Design, 37, (1), 87-92.

Xiong, Y., Xing, J.T. and Price, W.G. (2004) A power flow mode theory based on inherent characteristics of damping distributions in systems and its applications. In, XXI International Congress of Theoretical and Applied Mechanics, Warsaw, Poland, 15 - 21 Aug 2004.

Xiong, Y.P., Xing, J.T. and Price, W.G. (2004) Influence of flexible foundation on the dynamic characteristics of an active suspension system generating high stiffness. Proceedings of the Eleventh International Congress on Sound and Vibration (CD-ROM), St. Petersburg, Russian, 5-8 July, Published by IIAV, 233-240. (2178).

Xu, C. and Langdon, T.G. (2002) Homogeneity in Ultrafine-Grained Aluminum prepared by equal-channel angular pressing. In, Zhu, Y.T., Langdon, T.G., Mishra, R.S., Semiatin, S.L., Saran, M.J. and Lowe, T.C. (eds.) Ultrafine grained materials II. 2002 TMS Annual Meeting and Exhibition , Minerals, Metals & Materials Society, 163-172.

Xu, F., Horak, P.E. and Brambilla, G. (2006) Conical and bi-conical ultra-high-Q optical-fibre-nanowire microcoil resonator. In, Asia-Pacific Optical Communications - APOC 2006, Gwangju, Korea, 03 - 07 Sep 2006.

Xu, F., Pruneri, V., Finazzi, V. and Brambilla, G. (2008) High sensitivity refractometric sensor based on embedded optical microfiber loop resonator. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Xu, Fei and Brambilla, Gilberto (2008) Preservation of micro-optical fibres by embedding. Japanese Journal of Applied Physics, 47, (8), 6675-6677. (doi:10.1143/JJAP.47.6675).

Yamout, G. and El-Fadel, M. (2003) An optimization approach for multi-sectoral water supply management in the Greater Beirut Area. Lebanon, Water Resouces Centre, American University of Beirut, 22pp.

Yang, L.A., Powrie, W. and Priest, J.A. (2009) Dynamic stress analysis of a ballasted railway track bed during train passage. Journal of Geotechnical and Geoenvironmental Engineering, 135, ( 5), 680-689. (doi:10.1061/(ASCE)GT.1943-5606.0000032).

Yang, W., Kazansky, P.G., Shimotsuma, Y. and Hirao, K. (2008) Ultrashort-pulse laser calligraphy. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Yao, D.L., Zhang, Q., Li, J.C., Xie, Zheng-Tong and Shen, Z.X. (2004) Observation and modelling for terrestrial processes in alpine meadow. Applied Mathematics and Mechanics (English Edition), 25, 488-498. (doi:10.1007/BF02437597).

Yao, Y.F., Bura, R.O., Roberts, G.T. and Sandham, N.D. (2002) Time accurate simulation of supersonic and hypersonic laminar shock/boundary-layer interactions. In, CEAS/TRA3 Aerospace Aerodynamics Research Conference, Cambridge, UK, 10 - 12 Jun 2002. , 1-14.

Yao, Y.F. and Sandham, N.D. (2002) DNS of turbulent flow over a bump with shock/boundary-layer interactions. In, Rodi, W. and Fueyo, N. (eds.) Engineering Turbulence Modelling and Experiments. 5th International Symposium on Engineering Turbulence Modelling and Measurements , Elsevier, 677-686.

Ying, Y.J., Sones, C.L., Steigerwald, H., Johann, F., Soergel, E., Buse, K., Eason, R.W. and Mailis, S. (2009) UV laser-induced poling inhibition in lithium niobate crystals. In, Conference on Lasers and Electro-optics - European Quantum Electronics Conference (CLEO/Europe-EQEC 2009), Munich, Germany, 1pp.

Yoo, S., Kalita, M.P., Sahu, J.K., Nilsson, J. and Payne, D.N. (2008) Bismuth-doped fiber laser at 1.16 microns. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Young, E.A., Yang, Y., Huang, Y.B., Jutson, J., Riddle, R. and Beduz, C. (1999) Secondary Dwell and Slow Cooling in Ag/BiPb2223 Tapes. In, Applied Superconductivity 1999. Proceedings of EUCAS 1999, the Fourth European Conference on Applied Superconductivity. Bristol, UK, Institute of Physics, 631-634. (Institute of Physics Conference Series). (1942).

Young, M.S. and Stanton, N.A. (2007) What's skill got to do with it? Vehicle Automation and driver mental workload. Ergonomics, 50, (8), 1324-1339. (doi:10.1080/00140130701318855).

Young, Mark S. and Stanton, Neville A. (2007) Miles away: determining the extent of secondary task interference on simulated driving. Theoretical Issues in Ergonomics Science, 8, (3), 233-253. (doi:10.1080/14639220601129228).

Young, Mark S. and Stanton, Neville A. (2007) Back to the future: Brake reaction times for manual and automated vehicles. Ergonomics, 50, (1), 46-58. (doi:10.1080/00140130600980789).

Zhang, Z., Boyland, A.J., Sahu, J.K., Ibsen, M. and Clarkson, W.A. (2008) Single-frequency Tm-doped fiber master-oscillator power-amplifier with 10W linearly-polarized output at 1943 nm. In, CLEO/QELS 2008, San Jose, USA, 04 - 09 May 2008. (Submitted).

Zheludev, N. (2007) Focusing of light by a nano-hole array. In, Condensed Matter and Materials Physics Conference (CMMP 2007), Leicester, UK, 12 - 13 Apr 2007.

Zheludev, N. (2008) Coherent plasmonic meta-materials. In, Gordon Research Conferences 2008 Plasmonics, New Hampshire, USA, 27 Jul - 01 Aug 2008.

Zheludev, N. I. (2008) Mimicking quantum phenomena with classical meta-materials. In, SPIE Metamaterials: Fundamentals and Applications Conference, San Diego, USA, 10 - 13 Aug 2008.

Zheludev, N. I. (2008) Planar nanostructured photonic meta-materials. In, International Commission for Optics (ICO) 21st Congress 2008, Sydney, Australia, 07 - 10 Jul 2008.

Zheludev, N. I. (2008) Planar metamaterials obtaining new functionalities beyond negative refraction. In, Women in Photonics (WiP) School on Photonic Metamaterials, Paris, France, 13 - 18 Apr 2008.

Zheludev, N. I. (2008) Photonic metamaterials. In, CFN Summer School on Nanophotonics, Bad Herrenalb, Germany, 22 - 25 Aug 2008.

Zheludev, N. I. and Fedotov, V. A. (2008) Planar photonic meta-materials - the new elemental base of nanophotonic devices. In, 3rd International Conference Smart Materials Structures Systems (CIMTEC 2008), Acireale, Sicily, Italy, 08 - 13 Jun 2008.

Zheludev, N.I. (2008) Mimicking quantum phenomena with classical meta-materials. At European Optical Society Annual Meeting 2008 (EOS Annual Meeting 2008), Paris, France, 29 Sep - 02 Oct 2008.

Zheludev, N.I. (2008) Metamaterials as a platform for modelling in physics. At International Workshop on Theoretical and Computational Photonics 2008 (TaCoNa-Photonics 2008), Bad Honnef, Germany, 03 - 05 Dec 2008.

Zheludev, N.I. (2009) Metamaterials: the next photonic revolution. In, Nanotech Europe 2009, Berlin, Germany, 28 - 30 Sep 2009.

Zheludev, N.I., Fedotov, V., Schwanecke, A., Plum, E., Papasimakis, N. and Marinov, K. (2007) Plasmon resonances in photonic meta-materials. In, Frontiers in Optics (FiO) 2007, San Jose, USA, 16 - 20 Sep 2007.

Zheludev, Nikolay I. (2008) Mimicking quantum phenomena with classical meta-materials. In, NATO Advanced Research Workshop: Metamaterials for Secure Information and Communication Technologies (Meta 08), Marrakesh, Morocco, 07 - 10 May 2008. 1pp.

Zheng, P., Hall, R.D. and McDonald, M. (2007) Pedestrian behaviour and safety in the presence of guard railing. In, The 2nd IET International Conference on System Safety 2007. Proceedings of the 2nd International Conference on System Safety , Instution of Engineering and Technology, 141-146.

Zheng, P. and McDonald, M. (2003) The effect of sensor errors on the performance of collision warning systems. In, Intelligent Transportation Systems, 2003. Proceedings. 6th International IEEE Conference on Intelligent Transport Systems , IEEE Intelligent Transportation Systems Society, 469-474. (doi:0-7803-8125-4/03/$17.00).

Zheng, P. and McDonald, M. (2004) Collision warning timing based on normal breaking behaviour. In, Proceedings of the 83rd Annual Meeting of the Transportation Research Board, Washington, USA, 11 - 15 Jan 2004.

Zheng, P. and McDonald, M. (2009) Estimation of travel time using fuzzy clustering method. Institution of Engineering and Technology Intelligent Transport Systems, 3, (1), 77-86. (doi:10.1049/iet-its:20080021).

Zheng, P., McDonald, M. and Jeffery, D. (2007) Event detection based on loop and journey time data. In, Proceedings of 6th European ITS Congress. , Intelligent Transport Systems and Services (ITS '07), 113-119. (doi:10.1049/iet-its:20089011).

Zheng, P., McDonald, M. and Jeffery, D. (2008) Identification of traffic profiling scheme from operational data. In, 87th Annual Meeting of the Transportation Research Board, Washington, USA,

Zhou, Zongzhao, Ong, Yew Soon and Nair, P.B. (2004) Hierarchical surrogate-assisted evolutionary optimization framework. In, Congress on evolutionary computing. Congress on Evolutionary Computing 2004 , Institute of Electrical and Electronics Engineers, 1586-1593. (doi: 10.1109/CEC.2004.1331085).

Zhu, D.C., Xing, J.T. and Wang, Y.M. (1990) A numerical study on coupled dynamic analysis of liquid containers. Acta Aeronautica et Astronautica Sinica, 11, A578-A583.

Zhu, E.Y., Helt, L.G., Liscidini, M., Qian, L., Sipe, J.E., Canagasabey, A., Corbari, C., Ibsen, M. and Kazansky, P.G. (2009) From type II upconversion to SPDC: a path to broadband polarization entanglement in poled fibers. In, Conference on Lasers and Electro-Optics/International Quantum Electronics Conference (CLEO/IQEC 2009), Baltimore, USA, 31 May - 05 Jun 2009. 2pp.

van Brakel, A., Austin, E.A.D., Petrovich, M.N., Richardson, D.J. and Dakin, J.P. (2006) Correlation spectroscopy gas sensor with photonic band-gap fibre reference cell. In, EUROPT(R)ODE VIII: Eighth European Conference on Optical Chemical Biosensors, Tubingen, Germany, 02 - 05 Apr 2006.

This list was generated on Sat Apr 19 01:48:49 2014 BST.