Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Ansumali, S. and Karlin, I.V. (2000) Stabilization of the lattice Boltzmann method by the H theorem: A numerical test. Physical Review E, 62, (6), 7999-8003. (doi:10.1103/PhysRevE.62.7999)

Abazov, V.M. DØ Collaboration (2005) Measurement of the top quark mass in all-jet events. Physics Letters B, 606, (1-2), 25-33. (doi:10.1016/j.physletb.2004.11.071)

Abbiredd, C.O.R. and Clayton, C.R.I. (2009) A review of modern particle sizing methods. Proceedings of the ICE - Geotechnical Engineering, 162, (4), 193-201. (doi:10.1680/geng.2009.162.4.193)

Abbireddy, C.O.R. and Clayton, C. R. I. (2009) A review of modern particle sizing methods. Proceedings of the ICE - Geotechnical Engineering, 162, (4), 193-201. (doi:10.1680/geng.2009.162.4.193)

Abdel-Rahman, Ahmed Y.A. (1979) Matrix analysis of wave propagation in periodic systems. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 272pp.

Abdin, Enayat Mohamed Yakout (1982) Dynamic properties of some carbon fibre reinforced plastics. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 303pp.

Abdrashitova, S.A, Torrella, F. and Banks, C.J. (2003) Die-off of faecal organisms in an extreme climate waste stabilisation pond with over-winter water storage. In, International Ecological Forum 'Balkhash-2000', Almaty, Kazakhstan,

Abolfathi, A., Brennan, M.J. and Waters, T.P. (2010) Large deflection of a simply supported beam. Southampton, GB, University of Southampton, 28pp. (ISVR Technical Memorandum, 988)

Abou El-Magd, I. and Tanton, T.W. (2003) Real time crop coefficient from SEBAL method for estimating the evapotranspiration. In, 10th SPIE International Symposium: Remote Sensing for Agriculture, Ecosystems and Hydrology (Proceedings), Barcelona, Spain, 08 - 12 Sep 2003.

Abou Najm, M and El-Fadel, M. (2000) A linear programming model for the economic and environmental optimization of integrated solid waste management systems. In, 16th International Conference on Solid WasteTechnology and Management, Philadelphia, US, 10 - 13 Dec 2000.

Abreu, G.L.C.M., Lopes Jr, V. and Brennan, M.J. (2010) Robust control of an intelligent truss structure. In, Brennan, M.J., Kovacic, Ivana, Lopes, V., Murphy, K., Petersson, B., Rizzi, S. and Yang, T. (eds.) Recent Advances Structural Dynamics: Proceedings of the X International Conference. Southampton, GB, University of Southampton, 12pp.

Abu-Sara, Mohammad and Sharkh, Suleiman (2010) Digital control of a three-phase grid connected inverter. International Journal of Power Electronics (In Press)

Abu-Sharkh, S.M. and Abu-Sara, A. (2003) Current control of utility-connected two-level and three-level PWM inverters. In, Proceedings of the 10th European Conference on Power Electronics and Applications. 10th European Conference on Power Electronics and Applications Brussels, Belgium, European Power Electronics (EPE) Association, 9pp.

Abu-Sharkh, S.M., Abu-Sara, M. and Hussien, Z.F. (2001) Current control of utility-connected DC-AC three-phase voltage-source inverters using repetitive feedback. In, Proceedings of 9th European Conference on Power Electronics and Applications (EPE 01), Graz, Austria, 27 - 29 Aug 2001. 6pp.

Abu-Sharkh, S.M., Hussien, Z.F. and Sykulski, J.K. (2000) Current control of three-phase PWM inverters for embedded generators. In, Proceedings of the Eighth International Conference on Power Electronics and Variable Speed Drives 2000. Eighth International Conference on Power Electronics and Variable Speed Drives 2000 Piscataway, USA, Institution of Electronic and Electrical Engineers, 524-529.

Abu-Sharkh, S.M., Yuratich, M., Harris, M.R. and Head, P. (2001) A PM brushless motor for downhole drilling. In, Drives and Controls Power Electronic Conference, London, GB,

Abásolo, Daniel, James, Christopher and Hornero, Roberto (2007) Non-linear analysis of intracranial electroencephalogram recordings with approximate entropy and Lempel-Ziv complexity for epileptic seizure detection. In, 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (IEEE EMBC 2007), Lyon, France, 23 - 26 Aug 2007. , 1953-1956.

Accomando, E., Curtis, S. De, Dominici, D. and Fedeli, L. (2008) The four site Higgsless model at the LHC. Il Nuovo Cimento B, 123, (6), 809-811. (doi:10.1393/ncb/i2008-10609-4)

Achintha, M. and Burgoyne, C.J. (2011) Fracture mechanics of plate debonding: validation against experiment. Construction and Building Materials, 25, (6), 2961-2971. (doi:10.1016/j.conbuildmat.2010.11.103)

Achintha, Mithila and Burgoyne, Chris (2012) Prediction of FRP debonding using the global-energy-balance approach. Magazine of Concrete Research (In Press)

Achintha, Paththini Marakkala Mithila (2009) Fracture analysis of debonding mechanism for FRP plates. University of Cambridge, Department of Engineering, Doctoral Thesis, 218pp.

Adamson, J.E., Fenwick, A.J. and Humphrey, V.F. (2004) Transmission of a chaotic signal through a flat plate. In, Proceedings of the Seventh European Conference on Underwater Acoustics, Delft, Holland, 5-8 July 2004 , 1053-1058.

Adikan, M.F.R., Webb, A.S., Gawith, C.B.E., Gates, J.C., Sahu, J.K., Smith, P.G.R. and Payne, D.N. (2006) First demonstration of direct UV written Bragg gratings in collapsed fibre planar samples. In, ECOC 2006 Proceedings. ECOC 2006 France, Société de l'Electricité. de l'Electronique et des Technologies de l'Information et de la Communication, 2pp.

Adnan, Nor Aizam and Atkinson, P. M. (2010) Exploring the impact of climate and land use changes on streamflow trends in a monsoon catchment. International Journal of Climatology(doi:10.1002/joc.2112)

Afanasiev, P., Geantet, C. and Kerridge, D.H. (1999) Not only water - the synthesis of unusual material. Science International (Lahore), 11, 371-376.

Afanaviev, P. and Kerridge, D.H. (2001) Reactivity of V2O5, MoO5 and WO3 in molten KNO3, studied by mass spectormetry. Journal Alloys and Compounds, 322, (1-2), 97-102. (doi: 10.1016/S0925-8388(01)00955-0)

Afferante, L. and Ciavarella, M. (2004) Frictionally excited thermoelastic instability in the presence of contact resistance. Journal of Strain Analysis, 39, (4), 351-357.

Agarwal, A. and Gabard, G. (2008) On the separation of hydrodynamic and acoustic waves in linear free-shear flows. In, Acoustics'08, Paris, France, 29 Jun - 04 Jul 2008.

Agarwal, Anurag and Morris, Philip J. (2006) Numerical computation of the linear convective and absolute stability of free-shear flows. Computers and Fluids, 35, (10), 1282-1289. (doi:10.1016/j.compfluid.2005.06.003)

Aglietti, G.S., Bianchi, G. and Barrington-Brown, J. (2009) Impact oscillator based suspension system for a reaction wheel. In, COMPDYN 2009 - 2nd International Conference on Computational Methods in Structural Dynamics & Earthquake Engineering, Island of Rhodes, GR, 22 - 24 Jun 2009.

Aglietti, G.S., Cunningham, P.R. and Langley, R.S. (2002) Development and verification of modeling techniques for piezoelectric actuated panels. In, Proceedings of th 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference Reston, USA, American Institute of Aeronautics and Astronautics, 9pp.

Aglietti, G.S., Gomes, L. and Da Silva Curiel, A. (2006) Hard disk drives for spacecraft application. In, 57th International Astronautical Congress, Valencia, Spain, 02 - 06 Oct 2006.

Aglietti, G.S., Langley, R.S., Rogers, E. and Gabriel, S.B. (1999) Monte Carlo simulation of active control performance in the presence of structural uncertainties. In, EUROMECH 405 Colloquium "Numerical Modelling of Uncertainties", Valenciennes, France, 17 - 19 Nov 1999.

Aglietti, G.S., Langley, R.S., Rogers, E. and Gabriel, S.B. (2004) Model building and verification for active control of microvibrations with probabilistic assessment of the effect of uncertainties. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218, (4), 389-399.

Aglietti, G.S., Langley, R.S., Rogers, E. and Gabriel, S.B. (2004) Model building and verification for active control of microvibrations with probalistic assessment of the effect of uncertainties. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218, (4), 389-399.

Aglietti, G.S., Langley, R.S., Rogers, E. and Johnson, D.F. (2000) A study of robustness of active control systems for mass loaded satellite panels. In, Structural Dynamics: Recent Advances. Proceedings of the International Conference (7th). Seventh International Conference on Recent Advances in Structural Dynamics Southampton, UK, University of Southampton.

Aglietti, G.S., Rogers, E., Langley, R.S., Gabriel, S.B. and Stoustrup, J. (1997) Robust control of microvibrations. In, IEE Colloquium On Active Sound And Vibration Control, London, UK, 24 Nov 1997. 42pp.

Aglietti, G.S., Rogers, E., Stoustrup, J., Langley, R.S. and Gabriel, S.B. (2000) Optimal feedback control of microvibrations. In, UKACC International Conference CONTROL, Cambridge, UK, 04 - 07 Sep 2000.

Aglietti, G.S., Stoustrup, J., Rogers, E., Langley, R.S. and Gabriel, S.B. (1999) Further results on robust control of microvibrations on equipment loaded panels. In, IEE Colloquium Inter-Active '99 Jun 1999.

Ahmad, N., Thompson, D. J., Jones, C. J. C. and Muhr, A. H. (2009) Predicting the effect of temperature on the performance of elastomer-based rail damping devices. Journal of Sound and Vibration, 322, (4-5), 674-689. (doi:10.1016/j.jsv.2008.11.031)

Ahmed, K.M. (1972) Static and dynamic analysis of curved honeycomb sandwich structures by the finite element method. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 312pp.

Ahmed, T.M., Chapchap, A, Hudson, D.A., Temarel, P. and Hirdaris, S.E. (2010) The influence of forward speed and nonlinearities on the dynamic behaviour of a container ship in regular waves. In, William Froude Conference on Advances in theoretical and applied hydrodynamics – Past and Future, Portsmouth, GB, 24 - 25 Nov 2010.

Ahmed, T.M., Hudson, D.A. and Temarel, P. (2010) Comparison of two numerical models for the prediction of parametric roll resonance in regular waves. In, PRADS 2010: 11th International Symposium on Practical Design of Ships and Other Floating Structures, Rio de Janeiro, BR, 10pp.

Ahn, Se-Jin and Griffin, Michael J. (2008) Effects of frequency, magnitude, damping and direction on the discomfort of vertical whole-body mechanical shocks. Journal of Sound and Vibration, 311, (1-2), 485-497. (doi:10.1016/j.jsv.2007.09.026)

Ainslie, M.A. and Leighton, T.G. (2007) The influence of radiation damping on through-resonance variation in the scattering cross-section of gas bubbles. In, Papadakis, J.S. and Bjorno, L. (eds.) Proceedings of the Second International Conference on Underwater Acoustic Measurements, Technologies and Results. 2nd International Conference & Exhibition on "Underwater Acoustic Measurements: Technologies & Results" Southampton, UK, Institute of Sound and Vibration Research, 571-576.

Ainslie, Michael A. and Leighton, T.G. (2011) Effects of compressibility on the radiation and viscous damping terms in the scattering and extinction cross-sections of a single spherical bubble: a puzzle solved and a puzzle posed. In, Papadakis, J.S. and Bjorno, L. (eds.) Proceedings of the Fourth International Conference on Underwater Acoustic Measurements, Technologies and Results. Fourth International Conference on Underwater Measurements, Technologies and Results Heraklion, Greece, Institute of Applied and Computational Mathematics, 923-930. (In Press)

Ainslie, Michael A. and Leighton, Timothy G. (2009) Near resonant bubble acoustic cross-section corrections, including examples from oceanography, volcanology, and biomedical ultrasound. Journal of the Acoustical Society of America, 126, (5), 2163-2175. (doi:10.1121/1.3180130)

Ainslie, Michael A. and Morfey, Christopher L. (2005) "Transmission loss" and "propagation loss" in undersea acoustics. Journal of the Acoustical Society of America, 118, (2), 603-604. (doi:10.1121/1.1960170)

Akeroyd, Michael A., Chambers, John, Bullock, David, Palmer, Alan R., Summerfield, A. Quentin, Nelson, Philip A. and Gatehouse, Stuart (2007) The binaural performance of a cross-talk cancellation system with matched or mismatched set up and playback acoustics. Journal of the Acoustical Society of America, 121, (2), 1056-1069. (doi:10.1121/1.2404625)

Akhtar, M. and James, C. J. (2009) Focal artifact removal from ongoing EEG - A hybrid approach based on spatially-constrained ICA and wavelet de-noising. In, 31st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Minneapolis, Minnesota, USA, 02 - 06 Sep 2009. , 4pp.

Aksomaityte, Gabriele, Cheng, Fei, Hector, Andrew L., Hyde, Jason R., Levason, William, Reid, Gillian, Smith, David C., Wilson, James W. and Zhang, Wenjian (2010) Supercritical chemical fluid deposition of InP and InAs. Chemistry of Materials, 22, (14), 4246-4253. (doi:10.1021/cm1008812)

Al Abadi, Haider A., Lam, Nelson T.K., Gad, Emad F. and Chandler, Adrian M. (2004) Earthquake floor spectra for unrestrained building components. International Journal of Structural Stability and Dynamics, 4, (3), 361-377. (doi:10.1142/S0219455404001276)

Al Saleh, H., Bleeck, S. and Lutman, M.E. (2009) The effect of reverberation and amplification on sound localisation. At British Society of Audiology Short Papers Meeting on Experimental Studies of Hearing and Deafness, Southampton, UK, 17 - 18 Sep 2009.

Al-Fetlawi, Hassan Abdul-Zehra Abdul-Yima (2011) Modelling and simulation of all-vanadium redox flow batteries. University of Southampton, School of Engineering Sciences, Doctoral Thesis, 193pp.

Al-Hajjjaj, Abdelwahid, Zamora, Blanca, Shah, Akeel A., Bavykin, Dmitry V., Reguera, Edilso and Walsh, Frank C. (2011) On the application of standard isotherms to hydrogen adsorption in microporous materials. International Journal of Hydrogen Energy, 36, (22), 14464-14476. (doi:10.1016/j.ijhydene.2011.07.110)

Al-Hakawati, M.S. and Banks, C.J. (2000) Copper removal by polymer immobilised Rhizopus oryzae. Water Science and Technology, 42, (7-8), 345-352.

Al-Matawah, Jamal Ahmed (2008) An investigation of driver attitudes towards road safety in Kuwait. University of Southampton, School of Civil Engineering and the Environment, Doctoral Thesis, 342pp.

Al-Mosawi, M.K., Beduz, C., Webb, M. and Power, A. (2000) A 10-20 kVA single phase high temperature superconducting demonstrator transformer. Institute of Physics Conference Series on Applied Superconductivity (EUCAS '99 Spain, 1, 1135-8.

Al-Mosawi, M.K., Xu, B., Beduz, C., Goddard, K., Sykulski, J.K., Yang, Y., Stephen, N.G. and Stoll, R. (2003) Recent progress of 100kVA high temperature superconducting generator. In, Proceedings of 6th European Conference on Applied Superconductivity EUCAS 2003, Sorrento, Italy, 14 - 18 Sep 2003. Taylor and Francis CRC Press.

Al-Mosawi, M.K., Xu, B., Beduz, C., Yang, Y. and Stephen, N.G. (2005) Mechanism of improvement in bending strain tolerance for reinforced Bi2223 superconducting tapes. In, EUCAS 2005: European Conference on Applications of Superconductivity, Vienna, Austria, 11 - 15 Sep 2005. Vienna, Austria, EUCAS 2005: European Conference on Applications of Superconductivity, 1-4.

Al-Rawas, Nazar Yousif (1978) Diotic, dichotic and nonaural perceptibility and degree of repetition coloration. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 483pp.

Al-Thani, A.A., Beaven, R.P. and White, J.K. (2004) Landfill Process Modelling Workshop. Modelling flow to leachate wells in landfills. Waste Management, 24, (3), 271-276. (doi:10.1016/j.wasman.2003.11.010)

Alam, S.U. and Grudinin, A.B. (2004) Tunable picosecond frequency-shifted feedback fiber laser at 1550 nm. IEEE Photonics Technology Letters, 16, (9), 2012-2014. (doi:10.1109/LPT.2004.831958)

Alameddine, I. and El-Fadel, M. (2005) Stack emissions from desalination plants: a parametric sensitivity analysis for exposure assessment. Desalination, 177, (1), 15-29. (doi:10.1016/j.desal.2004.11.014)

Alavi, Hessam and Holland, Keith R. (2009) An investigation into loudspeaker cabinet vibration using reciprocity. In, Institute of Acoustics 25th Conference on Reproduced Sound: The Audio Explosion, Brighton, UK, 19 - 20 Nov 2009. , 177-187.

Alberola, J., Flindell, I.H. and Bullmore, A.J. (2005) Variability in road traffic noise levels. Applied Acoustics, 66, (10), 1180-1195. (doi:10.1016/j.apacoust.2005.03.001)

Alegria, Carlos, Jeong, Yoonchan, Codemard, Christophe, Sahu, Jayanta K., Fu, Libin, Mokhtar, Mohd Ridzuan, Ibsen, Morten, Baek, Seungin, Soh, Daniel B.S., Philippov, Valery and Nilsson, Johan (2004) Wideband tunable high power narrow linewidth erbium-ytterbium doped fiber laser using compression-tunable fiber Bragg grating. In, Durvasula, L.N. (ed.) Fiber Lasers: Technology, Systems, and Applications. Photonics West 2003: Rare-Earth-Doped Materials and Devices VII Bellingham, USA, International Society for Optical Engineering, 285-290. (Proceedings of SPIE, 5335). (doi:10.1117/12.528190)

Alexander, C., Curran, A., Smaje, C. and Williams, I. (2009) Evaluation of bulky waste and re-use schemes in England. ICE Proceedings, Waste and Resource Management, 162, (3), 141-150. (doi:10.1680/warm.2009.162.3.141)

Alexander, C., Smaje, C., Timlett, R. and Williams, I. (2009) Improving social technologies for recycling. Institute of Civil Engineering Proceedings, Waste and Resource Management, 162, (1), 15-28. (doi:10.1680/warm.2009.162.1.15)

Alfredson, R. J. (1970) The design and optimisation of exhaust silencers. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 222pp.

Alhajeri, Saleh N. (2010) Processing of aluminium and titanium alloys by severe plastic deformation. Univiersity of Southampton, School of Engineering Sciences, Doctoral Thesis.

Alhajeri, Saleh N., Kawasaki, Megumi, Gao, Nong and Langdon, Terence G. (2010) The evolution of homogeneity during processing of aluminium alloys by HPT. Materials Science Forum, 667-669, 277-282. (doi:10.4028/www.scientific.net/MSF.667-669.277)

Alhakawati, M.S. and Banks, C. J. (2004) Removal of copper from aqueous solution by ascophyllum nodosum immobilised in hydrophilic polyurethane foam. Journal of Environmental Management, 72, (4), 195-205. (doi:10.1016/j.jenvman.2004.04.010)

Allen, D.P., Playfer, J.R, Aly, N.M., Duffey, P., Heald, A., Smith, S.L. and Halliday, D.M. (2007) On the use of low-cost computer peripherals for the assessment of motor dysfunction in Parkinson's disease: quantification of bradykinesia using target tracking tasks. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 15, (2), 286-294. (doi:10.1109/TNSRE.2007.897020)

Allen, R. (2003) Subzero. In, Remotely operated vehicles of the world. Ledbury, UK, Oilfield Publications.

Allen, R. (2009) Bioinspiration & biomimetics: learning from nature. In, Biomimetics Workshop, Leeds, UK, 02 Jun 2009.

Allen, R. (2009) Bioinspired acoustic and cooperative robotic systems (Invited plenary lecture). In, International Conference on Natural & Biomimetic Mechanosensing, Dresden, Germany, 26 - 28 Oct 2009. , 29-30.

Allen, R. (2009) Signal processing in patient assessment and care: from hospital to home (invited keynote lecture). In, 9th International Conference on Information Technology and Applications in Biomedicine., Larnaca, Cyprus,, 05 - 07 Nov 2009. IEEE, 2pp.

Allen, R. (2009) Signal processing in patient assessment and care: from hospital to home (invited tutorial). In, 2nd International Symposium on Applied Sciences in Biomedical and Communication Technologies, Bratislava, Slovak Republic, 24 - 27 Nov 2009.

Allen, R. (2009) "Signal processing in patient diagnosis and care: from hospital to home and beyond" (Invited Keynote Lecture). In, ISABEL 2009 2nd International Symposium on Applied Sciences in Biomedical and Communication Technologies,

Allen, R. and De Stefano, A. (2007) A data acquisition and analysis system for the biomechanical evaluation of patient moving and transferring equipment and procedures. Journal of Medical Engineering and Technology, 31, (1), 14-23. (doi:10.1080/03091900500233593)

Allen, Robert (2006) From feathers to fins: can we understand biological systems - and learn from them? Bioinspiration & Biomimetics, 1, 1-2. (doi:10.1088/1748-3190/1/1/E01)

Allen, Robert (2010) Cooperative behaviour. In, Bulletproof feathers: how science uses nature's secrets to design cutting edge techology. Chicago, US, London, GB, University of Chicago Press, 88-109.

Allen, Robert (2010) Introduction. In, Bulletproof feathers: how science uses nature's secrets to design cutting edge techology. Chicago, US, London, GB, University of Chicago Press, 6-21.

Allwood, J.M., Huang, Y. and Barlow, C.Y. (2005) Recycling scrap aluminium by cold-bonding. In, Bariani, Paolo (ed.) Advanced Technology of Plasticity 2005 - Proceedings of the 8th International Conference on Technology Plasticity. Verona, IT, Edizioni Progetto.

Almutari, Jaber (2011) Large-eddy simulation of flow around an airfoil at low Reynolds number near stall. University of Southampton, School of Engineering Sciences, Doctoral Thesis, 230pp.

Alonso-Vazquez, A., Luage-Pederson, H., Lidgren, L. and Taylor, M. (2001) Stability of ankle arthrodesis with internal fixation. A preliminary finite element study. In, International Society of Biomechanics XVIIIth Congress, Zurich, Switzerland, 08 - 13 Jul 2001. , 681.

Alujevic, N., Frampton, K.D. and Gardonio, P. (2008) Stability and performance of a smart double panel with decentralized active dampers. American Institute of Aeronautics and Astronautics Journal, 46, (7), 1747-1756. (doi:10.2514/1.34572)

Alujevic, N. and Gardonio, P. (2006) Smart double panel with active damping units located in the air cavity. In, Institute of Acoustics Spring Conference, Futures in Acoustics, Today's Research - Tomorrow's Careers, Southampton, UK, 03 - 04 Apr 2006. Southampton, UK, University of Southampton, Institute of Sound and Vibration Research, 126-137.

Alujevic, N., Gardonio, P. and Frampton, K. (2009) Smart double panel with decentralized feedback control units for blended velocity feedback. In, Active 2009 Conference, Ottawa, Canada, 20 - 22 Aug 2009. 12pp.

Alujevic, N., Gardonio, P. and Frampton, K.D. (2008) Experiments on a smart double panel for the active control of sound transmission. At International Conference on Noise & Vibration Engineering (ISMA), Leuven, Belgium, 15 - 17 Sep 2008.

Alujevic, Neven, Gardonio, Paolo and Frampton, Kenneth D. (2008) Smart double panel with decentralized active damping units for the control of sound transmission. AIAA Journal, 46, (6), 1463-1475. (doi:10.2514/1.32369)

Alujević, Neven (2008) Smart double panel with decentralised active damping units for the control of sound transmission. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 191pp.

Alujević, Neven and Gardonio, Paolo (2006) Performance and stability properties of a smart double panel with decentralized active dampers. In, Proceedings of the Sixth International Symposium on Active Noise and Vibration Control, ACTIVE 2006, Adelaide, Australia, 19 - 20 Sep 2006. , 13pp.

Amaratunga, S.R., Tutty, O.R. and Roberts, G.T. (2000) High-speed flow with discontinuous surface catalysis. Journal of Fluid Mechanics, 420, 325-359. (doi:10.1017/S0022112000001610)

Amezcua-Correa, A., Peacock, A.C., Finlayson, C.E., Baumberg, J.J., Yang, J., Howdle, S.M. and Sazio, P.J.A. (2006) Surface enhanced Raman scattering using metal modified microstructured optical fibre substrates. In, ECOC 2006 Proceedings. ECOC 2006 France, Société de l'Electricité. de l'Electronique et des Technologies de l'Information et de la Communication, 2pp.

Amezcua-Correa, A., Yang, J., Finlayson, C.E., Peacock, A.C., Hayes, J.R., Sazio, P.J.A., Baumberg, J.J. and Howdle, S.M. (2007) Surface-enhanced Raman scattering using microstructured optical fiber substrates. Advanced Functional Materials, 17, (13), 2024-2030. (doi:10.1002/adfm.200601125)

Amezcua-Correa, Adrian, Yang, J., Finlayson, C.E., Peacock, A.C., Hayes, J.R., Sazio, P.J.A., Baumberg, J.J. and Howdle, S.M. (2007) Surface enhanced Raman scattering using microstructured optical fibre substrates. Advanced Functional Materials, 17, (13), 2024-2030. (doi:10.1002/adfm.200601125)

Amezcua-Correa, Rodrigo, Broderick, Neil G.R., Petrovich, Marco N. and Richardson, David J. (2007) Comparison of mode properties of 7 and 19 cells core hollow-core photonic crystal fibers. In, OFC/NFOEC 2007, Anaheim, USA, 25 - 29 Mar 2007.

Amigoni, F., Beda, A. and Gatti, N. (2006) Combining rate-adaptive cardiac pacing algorithms via multiagent negotiation. IEEE Transactions on Information Technology in Biomedicine, 10, (1), 11-18. (doi:10.1109/TITB.2005.855564)

Amirante, Dario and Luo, Kai H. (2005) A numerical investigation on vortex breakdown in swirling jets. IASME Transactions, 2, (7), 1221-1226.

Amirhaghi, S., Plappert, E., Bajic, Z., Reehal, H.S., Wood, R.J.K.W. and Wheeler, D.W. (1998) Growth and wear properties of diamond coatings on W and WC substrates. In, Proceedings of Diamond 98 Conference 1998.

Amirhaghi, S., Reehal, H.S., Plappert, E., Bajic, Z., Wood, R.J.K. and Wheeler, D.W. (1999) Growth and erosive wear performance of diamond coatings on WC substrates. Diamond and Related Materials, 8, (2-5), 845-849. (doi:10.1016/S0925-9635(98)00319-7)

Amor, J. and James, C. J. (2009) Personalised ambient monitoring: wireless cameras for activity detection. In, 5th IEEE EMBS UK & Republic of Ireland Postgraduate Conference on Biomedical Engineering and Medical Physics, Oxford, UK, 12 - 14 Jul 2009. , 1-2.

Amor, J.D. and James, C.J. (2008) Personalized ambient monitoring: accelerometry for activity level classification. In, 4th European Conference of the International Federation for Medical and Biological Engineering. 4th European Congress for Medical and Biomedical Engineering Berlin, Germany, Springer, 866-870. (IFMBE Proceedings 22). (doi:10.1007/978-3-540-89208-3_207)

Ampofo, Edward Akwasi (2009) The use of numerical groundwater model to improve effectiveness of subsurface drainage system in irrigated field. University of Southampton, School of Civil Education and the Environment, Doctoral Thesis, 157pp.

Amundson, I., Schmidt, P. and Frampton, K.D. (2004) A decentralized approach to sound source localization with sensor networks. In, 2004 Proceedings of the ASME International Mechanical Engineering Congress & Exposition. ASME International Mechanical Engineering Congress & Exposition USA, American Society of Mechanical Engineers.

Amy, R.A., Aglietti, G.S. and Richardson, G (2009) Simplified analysis of PCBs in response to random vibrations. In, COMPYDN 2009 - 2nd International Conference on Computational Methods in Structural Dynamics & Earthquake Engineering, Rhodes, Greece, 22 - 24 Jun 2009.

Amy, Robin Alastair, Aglietti, Guglielmo S. and Richardson, Guy (2009) Reliability analysis of electronic equipment subjected to shock and vibration, a review. Shock and Vibration, 16, (1), 45-59. (doi:10.3233/SAV-2009-0453)

Amy, Robin Alistar, Aglietti, Guglielmo and Richardson, Guy (2008) Analysis of simplified FE models of PCBs exposed to random vibrations. In, International Conference on Noise & Vibration Engineering (ISMA2008), Leuven, Belgium, 15 - 17 Sep 2008.

An, X.H., Lin, Q.Y., Wu, S.D., Zhang, Z.F., Figueiredo, R.B., Gao, N. and Langdon, T.G. (2011) Formation of fivefold deformation twins in an ultrafine-grained copper alloy processed by high-pressure torsion. Scripta Materialia, 64, (3), 249-252. (doi:10.1016/j.scriptamat.2010.10.012)

An, X.H., Lin, Y., Wu, S.D., Zhang, Z.F., Figueiredo, R.B., Gao, N. and Langdon, T.G. (2011) Significance of stacking fault energy on microstructural evolution in Cu and Cu-Al alloys processed by high-pressure torsion. Philosophical Magazine, 91, (25), 3307-3326. (doi:10.1080/14786435.2011.577757)

An, X.H., Lin, Q.Y., Wu, S.D., Zhang, Z.F., Figueiredo, R.B., Gao , N. and Langdon, T.G. (2011) The influence of stacking fault energy on the mechanical properties of nanostructured Cu and Cu–Al alloys processed by high-pressure torsion. Scripta Materialia, 64, (10), 954-957. (doi:10.1016/j.scriptamat.2011.01.041)

Anani, S, Kharrat, K and El-Fadel, M. (2000) Air quality assessment at signalized intersections. In, Air & Waste Management Association (AWMA) 93rd Annual Meeting, Salt Lake City, US, 18 - 22 Jun 2000.

Anastasiou, K., Tickell, R.G. and Chaplin, J.R. (1982) Measurements of particle velocities in laboratory scale random waves. Coastal Engineering, 6, (3), 233-254. (doi:10.1016/0378-3839(82)90021-7)

Andersen, L. and Jones, C.J.C. (2006) Coupled boundary and finite element analysis of vibration from railway tunnels: a comparison of two- and three-dimensional models. Journal of Sound and Vibration, 293, (3-5), 611-625. (doi:10.1016/j.jsv.2005.08.044)

Anderson, G. and Hill, M. (1995) Modelling of balanced armature acoustic sounders. Acoustic Bulletin, 20, 5-9.

Anderson, Graeme (1997) Design of high efficiency loudspeakers for use in fire alarms. University of Southampton, School of Engineering Sciences, Doctoral Thesis.

Anderson, Ilona, Phillips, Lucy, Roberts, Lynne, Jamieson, Lyn, Costa, Anne and Cross, Sarie (2008) TeenEARS: development of a pilot assessment battery for cochlear implanted adolescents. Cochlear Implants International, 9, (3), 119-131. (doi:10.1002/cii.361)

Anderson, K., Milton, E.J. and Rollin, E.M. (2003) The temporal dynamics of calibration target reflectance. In, Scales and Dynamics in Observing the Environment, Nottingham, UK, 10 - 12 Sep 2003. Nottingham, UK, Remote Sensing and Photogrammetry Society14pp.

Anderson, S.R., Kadirkamanathan, V., Chipperfield, A.J., Sharifi, V. and Swithenbank, J. (2005) Multi-objective optimization of operational variables in a waste incineration plant. Computers & Chemical Engineering, 29, (5), 1121-1130. (doi:10.1016/j.compchemeng.2004.12.001)

Anderson, W.P, Song, Y and Lakshmanan, T.R (2010) Employment growth in two US highway corridors: an extended shift-share analysis. Transportation Research Record (Submitted)

Andrews, Doug (2008) A framework for enhancing the management of multi-employer pension plans. In, 2008 Stochastic Modeling Symposium and Investment Seminar, Montreal, Canada, 01 - 02 Dec 2008. 29pp.

Andrews, Doug (2009) Are automatic balancing mechanisms appropriate for private sector defined benefit pension plans? In, 29th International Congress of Actuaries, Cape Town, South Africa, 07 - 12 Mar 2010. 28pp.

Andrianakis, I., Dillon, J.C., Mitchell, P., Mould, R., Glautier, S., O'Connor, V., Holden-Dye, L. and James, C.J. (2008) A software tool for the analysis of C. elegans electropharyngeograms (EPG) (Poster). At Neuronal Development Synaptic Function and Behaviour C. Elegans Topic Meeting 2, University of Wisconsin, Madison, USA, 29 Jun - 02 Jul 2008.

Andrianakis, I. and White, P.R. (2004) Adaptive bandwidth selection for mitigating the permutation problem in frequency domain ICA. At Sixth Institute of Mathematics and its Applications (IMA) International Conference on Mathematics in Signal Processing, Cirencester, UK, 14 - 16 Dec 2004. , 27-31.

Andrianakis, I. and White, P.R. (2006) On the application of Markov Random Fields to speech enhancement. In, Proceedings of the 7th IMA International Conference in Signal Processing, Cirencester, UK, 18 - 20 Dec 2006. , 198-201.

Andrianakis, Y. and White, P. R. (2009) A speech enhancement algorithm based on a Chi MRF model of the speech STFT amplitudes. IEEE Transactions on Audio, Speech and Language Processing, 17, (8), 1508-1517. (doi:10.1109/TASL.2009.2022199)

Ang, K.C. (2009) Assessment of complex electron beam textured rough surfaces. University of Southampton, Engineering Sciences: nCATS Research Group, Doctoral Thesis.

Ang, K.C., Wood, R.J., Wang, L., Dulieu-Barton, J.M., Dance, B.G. and Buxton, A. (2007) Pulse phase thermography (PPT): potential characterisation technology for grossly sculpted surfaces. In, Novel Applications of Surface Modification (NASM 2007), Southampton, UK, 18 - 20 Sep 2007. Southampton, UK, Institute of Physics1pp.

Ang, K.C., Wood, R.J.K. and Wang, L. (2007) Three-dimensional (3-D) characterisation of sculpted surfaces. In, 11th International Conference on Metrology and Properties of Engineering Surfaces, Huddersfield, UK, 16 - 20 Jul 2007.

Ang, K.C., Wood, R.J.K. and Wang, L. (2008) Complex rough surface metrology: suitable techniques and parameters. Journal of Physics D: Applied Physics (Submitted)

Ang, K.C., Wood, R.J.K. and Wang, L. (2008) Screening of characterisation technologies for complex rough surfaces. International Journal of Surface Science and Engineering: Special Issue on Advances in the Analysis of Surface Texture in Engineering Manufacture(DOI: 10.1504/IJSURFSE.2009.027417) (Submitted)

Ang, K.C., Wood, R.J.K. and Wang, L. (2009) Assessment of complex 3-D textured and rough surfaces. In, 14th Materials, Surface Engineering and Bioengineering Sciences Postgraduate Conference, Southampton, UK, Oct 2009. (Submitted)

Ang, K.C., Wood, R.J.K. and Wang, L. (2009) Assessment of complex rough surfaces for surface texturing and tribological applications. In, UK-China Symposium & Summer School of Tribology and Surface Engineering, Lanzhou, China, 26 Jun - 05 Jul 2009.

Ang, K.C., Wood, R.J.K., Wang, L., Dulieu-Barton, J.M., Dance, B.G.I. and Buxton, A.L. (2007) Developing pulse phase thermography as a characterisation tool for grossly sculpted surfaces. In, SUR/FIN 2007 (International Surface Finishing Conference), Cleveland, USA, 14 - 17 Aug 2007. Cleveland, USA, 15pp.

Ang, K.C., Wood, R.J.K., Wang, L., Dulieu-Barton, J.M., Dance, B.G.I. and Buxton, A.L. (2007) Topographical characterization of electron beam sculpted surfaces by pulse phase thermography. In, Advanced Infrared Technology and Applications 9, Leon, Mexico, 08 - 12 Oct 2007. Leon, Mexico, 1pp.

Ang, K.C., Wood, R.J.K., Wang, L., Dullieu-Barton, J.M., Dance, B.G.I. and Buxton, A.L. (2008) Developing pulse phase thermography as a characterization tool for grossly sculpted surfaces. Journal of Applied Surface Finishing, 3, (3), 99-113.

Ang, K.C., Wood, R.J.W. and Wang, L. (2009) Screening of characterisation technologies for complex rough surfaces. International Journal of Surface Science and Engineering, 3, (4), 286-309. (doi:10.1504/IJSURFSE.2009.027417)

Ang, K.C., Wood, R.J.W. and Wang, L. (2009) Optical laser triangulation and pulse phase thermography based 3D surface assessment techniques for complex rough surfaces. Measurement Science and Technology (Submitted)

Angland, D., Zhang, X. and Molin, N. (2009) Measurements of flow around a flap side edge with porous edge treatment. AIAA Journal, 47, (7), 1660-1671. (doi:10.2514/1.39311)

Angland, David (2008) Aerodynamics and aeroacoustics of flap side-edges. University of Southampton, School of Engineering Sciences, Doctoral Thesis, 177pp.

Anisimov, Alexey, Blanchet, Steve and Di Bari, Pasquale (2008) Viability of dirac phase leptogenesis. Journal of Cosmology and Astroparticle Physics, 2008, (4)(doi:10.1088/1475-7516/2008/04/033)

Annett, John and Stanton, Neville A. (1998) Editorial. Ergonomics, 41, (11), 1529-1536. (doi:10.1080/001401398186054)

Anson, A.W., Franks, J., Jones, B.J., Baig, F., Tyas, J., Weaver, P., Swingler, J., Lipscomb, I., McBride, J.W. and Stewart, M. (2007) Maintaining functional performance of piezo ceramic actuators by the control of moisture ingression using thin film barriers. At Novel Applications of Surface Modification (NASM), Southampton, UK, 18 - 20 Sep 2007.

Ansumali, S., Arcidiacono, S., Chikatamarla, S.S., Gorban, A.N. and Karlin, I.V. (2007) Quasi-equilibrium lattice Boltzmann method. The European Physical Journal B: Condensed Matter and Complex Systems, 56, (2), 135-139. (doi:10.1140/epjb/e2007-00100-1)

Ansumali, S. and Karlin, I.V. (2002) Single relaxation time model for entropic lattice Boltzmann methods. Physical Review E, 65, (5), 056312. (doi:10.1103/PhysRevE.65.056312)

Ansumali, S., Karlin, I.V., Arcidiacono, S., Abbas, A. and Prasianakis, N.I. (2007) Hydrodynamics beyond Navier-Stokes: Exact solution to the lattice Boltzmann hierarchy. Physical Review Letters, 98, (12), 124502. (doi:10.1103/PhysRevLett.98.124502)

Ansumali, S., Karlin, I.V., Frouzakis, C.E. and Boulouchos, K.B. (2006) Entropic lattice Boltzmann method for microflows. Physica A: Statistical Mechanics and it's Applications, 359, 289-305. (doi:10.1016/j.physa.2005.04.039)

Ansumali, S., Karlin, I.V. and Ottinger, H.C. (2003) Minimal entropic kinetic models for hydrodynamics. Europhysics Letters, 63, (6), 798-804. (doi:10.1209/epl/i2003-00496-6)

Ansumali, S., Karlin, I.V. and Ottinger, H.C. (2005) Thermodynamic theory of incompressible hydrodynamics. Physical Review Letters, 94, (8), 080602. (doi:10.1103/PhysRevLett.94.080602)

Ansumali, S., Karlin, I.V. and Succi, S. (2004) Kinetic theory of turbulence modeling: smallness parameter, scaling and microscopic derivation of Smagorinsky model. Physica A: Statistical Mechanics and it's Applications, 338, (3-4), 379-394. (doi:10.1016/j.physrep.2004.03.006)

Ansumali, Santosh and Karlin, Iliya V. (2002) Kinetic boundary conditions in the lattice Boltzmann method. Physical Review E, 66, (2), 026311-[6pp]. (doi:10.1103/PhysRevE.66.026311)

Ansumali, Santosh and Karlin, Iliya V. (2005) Consistent lattice Boltzmann method. Physical Review Letters, 95, (26), 260605-[4pp]. (doi:10.1103/PhysRevLett.95.260605)

Anthoff, D., Nicholls, R.J., Tol, R.S.J. and Vafeidis, A.T. (2006) Global and regional exposure to large rises in sea-level: a sensitivity analysis. Norwich, UK, Tyndell Centre for Climate Change Research, 31pp. (Tyndell Centre for Climate Change Research working papers,(96))

Anthony, D.K. and Elliott, S.J. (2000) Comparison of the effectiveness of minimizing cost function parameters for active control of vibrtional energy transmission in a lightly damped structure. Journal of Sound and Vibration, 237, (2), 223-244. (doi:10.1006/jsvi.2000.3035)

Anthony, D.K. and Elliott, S.J. (2000) Robustness of optimal design solutions to reduce vibration transmission in a lightweight 2D structure, part II: application of active vibration control techniques. Journal of Sound and Vibration, 229, (3), 529-548. (doi:10.1006/jsvi.1999.2494)

Anthony, D.K. and Elliott, S.J. (2001) On reducing vibration transmission in a two-dimensional cantilever truss structure using geometric optimization and active vibration control techniques. Journal of the Acoustical Society of America, 110, (2), 1191-1194. (doi:10.1121/1.1381022)

Anthony, D.K., Elliott, S.J. and Keane, A.J. (2000) Robustness of optimal design solutions to reduce vibration transmission in a lightweight 2D structure, part 1: geometric design. Journal of Sound and Vibration, 229, (3), 505-528. (doi:10.1006/jsvi.1999.2493)

Anthony, K., Haq, N. and Cilliers, B. (1995) Genetic resources and utilization of underutilized crops in Southern and Eastern Africa. Proceedings of Symposium held at the Institute for Tropical and Subtropical Crops Nelspruit, South Africa, August 1995, Nelspruit, ZA, Food and Agriculture Organization, International Centre for Underutilised Crops & Commonwealth Science Council, 175pp.

Anthony, K., Haq, N. and De Groot, P. (1992) Underutilized tropical fruits in Asia. London, GB, International Centre for Underutilised Crops, CSC

Antusch, Stefan, Di Bari, Pasquale, Jones, David A. and King , Steve F. (2010) A fuller flavour treatment of N_2-dominated leptogenesis. Pre-print, (arXiv:1003.5132), 31pp. (Submitted)

Anwar, A. and de Vries, T. (2004) Closure to '"Hydraulically efficient power-law channels" by Arif A Anwar and Tonny T. de Vries'. Journal of Irrigation and Drainage Engineering, 130, (5), 445-446. (doi:10.1061/(ASCE)0733-9437(2004)130:5(447))

Anwar, A. A. and Clarke, D. (2001) Irrigation scheduling using mixed integer linear programming. Journal of Irrigation and Drainage Engineering, ASCE, 127, (2), 63-69. (doi:10.1061/(ASCE)0733-9437(2001)127:2(63))

Anwar, A.A. and Bahaj, A.S. (2003) Student project allocation using integer programming. IEEE Transactions on Education, 46, (3), 359-367. (doi:10.1109/TE.2003.811038)

Anwar, Arif A. (2000) Inlet pressure for horizontal tapered laterals. Journal of Irrigation and Drainage Engineering, 126, (1), 57-63. (doi:10.1061/(ASCE)0733-9437(2000)126:1(57))

Anwar, Arif A. (1999) Factor "G" for pipelines with equally spaced multiple outlets and outflow. Journal of Irrigation and Drainage Engineering, 125, (1), 34-38. (doi:10.1061/(ASCE)0733-9437(1999)125:1(34))

Anwar, Arif A. (1999) Baffle sluice modules with improved performance. Journal of Irrigation and Drainage Engineering, 125, (2), 91-95. (doi:10.1061/(ASCE)0733-9437(1999)125:2(91))

Anwar, Arif A. (1999) Friction correction factors for center-pivots. Journal of Irrigation and Drainage Engineering, 125, (5), 280-286. (doi:10.1061/(ASCE)0733-9437(1999)125:5(280))

Anwar, Arif A. (1999) Adjusted factor G(a) for pipelines with outlets and outflow. Journal of Irrigation and Drainage Engineering,, 125, (6), 355-359. (doi:10.1061/(ASCE)0733-9437(1999)125:6(355))

Anwar, Arif A. (2000) Correction factors for center-pivots with end-guns. Journal of Irrigation & Drainage Engineering, 126, (2), 113-118. (doi:10.1061/(ASCE)0733-9437(2000)126:2(113))

Anwar, Arif A. (2000) Adjusted average correction factors for sprinkler laterals. Journal of Irrigation and Drainage Engineering, 126, (5), 296-303. (doi:10.1061/(ASCE)0733-9437(2000)126:5(296))

Anwar, Arif A. and Clarke, Derek (2005) Design of hydraulically efficient power-law channels with freeboard. Journal of Irrigation and Drainage Engineering, 131, (6), 560-563. (doi:10.1061/(ASCE)0733-9437(2005)131:6(560))

Anwar, Arif A., Clarke, Derek and de Vries, Tonny T. (2006) Channel capacity under arranged demand irrigation. Agricultural Water Management, 82, (1-2), 148-160. (doi:10.1016/j.agwat.2005.05.007)

Anwar, Arif A. and De Vries, Tonny T. (2004) Irrigation scheduling II: Heuristics approach. Journal of Irrigation & Drainage Engineering, ASCE, 130, (1), 17-25. (doi:10.1061/(ASCE)0733-9437(2004)130:1(17))

Anwar, Arif A. and de Vries, Tonny T. (2003) Hydraulically efficient power-law channels. Journal of Irrigation and Drainage Engineering, ASCE, 129, (1), 18-26. (doi:10.1061/(ASCE)0733-9437(2003)129:1(18))

Aoki, Y., Boyle, P.A., Christ, N.H., Dawson, C., Donnellan, M.A., Izubuchi, T., Jüttner, A., Li, S., Mawhinney, R.D., Noaki, J., Sachrajda, C., Soni, A., Tweedie, R.J. and Yamaguchi, A. (2008) Nonperturbative renormalization of quark bilinear operators and BK using domain wall fermions. Physical Review D, 78, (5), 054510-[28pp]. (doi:10.1103/PhysRevD.78.054510)

Aoki, Y., Gardonio, P. and Elliott, S.J. (2006) Parametric study of a piezoelectric patch-accelerometer pair for velocity feedback control. In, Spring Conference 2006: Futures in Acoustics Today’s research – Tomorrow’s careers, Southampton, England, 03 - 04 Apr 2006. Southampton, UK, , 441-452.

Aoki, Y., Gardonio, P. and Elliott, S.J. (2006) Stability of a piezoelectric patch-accelerometer active damping control system in smart panel. In, Proceedings of Euronoise 2006. Euronoise 2006 Italy, European Acoustics Association.

Aoki, Y., Gardonio, P. and Elliott, S.J. (2006) Smart panel with triangularly shaped piezoelectric actuators. At Adaptive Structures: 2006 Colston Research Society Symposium, Bristol, UK, 10 - 12 Jul 2006.

Aoki, Y., Gardonio, P. and Elliott, S.J. (2006) Strain transducers for active control - lumped parameter model. Southampton, UK, Institute of Sound and Vibration Research, University of Southampton, 86pp. (ISVR Technical Memorandum,(970))

Aoki, Y., Gardonio, P. and Elliott, S.J. (2008) Modelling of piezoceramic patch actuator for velocity feedback control. Smart Materials and Structures, 17, (1), 015052-[13pp]. (doi:10.1088/0964-1726/17/1/015052)

Aoki, Yohko, Emo, Damien, Gardonio, Paolo and Elliott, Stephen J. (2006) Stability and controllability of velocity feedback loops with triangularly shaped piezoelectric actuators. In, Proceedings of the Sixth International Symposium on Active Noise and Vibration Control, ACTIVE 2006, Adelaide, Australia, 19 - 20 Sep 2006. , 13pp.

Aoki, Yohko, Gardonio, Paolo and Elliott, Stephen J. (2008) Rectangular plate with velocity feedback loops using triangularly shaped piezoceramic actuators: Experimental control performance. Journal of the Acoustical Society of America, 123, (3), 1421-1426. (doi:10.1121/1.2835663)

Apostolopoulos, Vasilis (2003) Gallium and titanium diffused optical waveguide devices in sapphire. University of Southampton, Optoelectronic Research Center, Doctoral Thesis, 181pp.

Arak, Robin Graeme (1982) An investigation into flow and acoustic coupling of tubes in gas heat exchanger tube banks. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 414pp.

Arboleda, Gustavo and El-Fadel, Mutasem (1996) Effects of approach flow conditions on pump sump design. In, Bathala, Chenchayya (ed.) North American Water and Environment Congress & Destructive Water. North American Water and Environment Congress ’96 New York, US, American Society of Civil Engineers, 376-381.

Arboleda, Gustavo and El-Fadel, Mutasem (1996) Effects of approach flow conditions on pump sump design: a case study. In, North American Water and Environment Congress & Destructive Water. ASCE, North American Water and Environment Congress '96 New York, US, American Cociety of Civil Engineers, 376-381.

Arbuthnott, A.G. and Shaw, P. J. (1999) The influence of siltation and channel widening on the macroinvertebrate communities of chalk streams. In, First Symposium for European Freshwater Sciences, Antwerp, BE, 22 - 28 Aug 1999.

Arbuthnott, A.G. and Shaw, P. J. (1999) The influence of substrate type on macroinvertebrate recolonisation in a chalk river. In, British Ecological Society Winter Meeting, Leeds, GB, 21 - 23 Dec 1999.

Archbold, Sue, Sach, Tracey, O'Neill, Ciaran, Lutman, Mark and Gregory, Susan (2006) Deciding to have a cochlear implant and subsequent after-care: parental perspectives. Deafness and Education International, 8, (4), 190-206. (doi:10.1002/dei.201)

Archbold, Sue, Sach, Tracey, O'Neill, Ciaran, Lutman, Mark and Gregory, Susan (2008) Outcomes from cochlear implantation for child and family: parental perspectives. Deafness & Education International, 10, (3), 120-142. (doi:10.1002/dei.243)

Archer, P.J., Thomas, T.G., Yorke, C.P. and Coleman, G.N. (2007) Numerical study of vortex ring evolution and interaction with a free surface. In, 5th International Symposium on Turbulence and Shear Flow Phenomena, Munich, Germany, 27 - 29 Aug 2007. 6pp, 373-378.

Arcidiacono, S., Ansumali, S., Karlin, I.V., Mantzaras, J. and Boulouchos, K.B. (2006) Entropic lattice Boltzmann method for simulation of binary mixtures. Mathematics and Computers in Simulation, 72, (2-6), 79-83. (doi:10.1016/j.matcom.2006.05.005)

Arcidiacono, S., Mantazaras, J., Ansumali, S., Karlin, I.V., Frouzakis, C. and Boulouchos, K.B. (2006) Simulation of binary mixtures with the lattice Boltzman method. Physical Review E, 74, (5), 056707-[10pp]. (doi:10.1103/PhysRevE.74.056707)

Arenstam Gibbons, Sheila and Nicholls, R.J. (2005) Island abandonment and sea-level rise: An historical analog from the Chesapeake Bay, USA. Global Environmental Change, 16, (1), 40-47. (doi:10.1016/j.gloenvcha.2005.10.002)

Armitage, P.D. and McDonald, M. (1974) Roundabout capacity - current problems. Traffic Engineerng and Control, 15, (8), 812-816.

Armstrong, A.C., Rycroft, D.W. and Welch, D.J (1980) Modelling watertable response to climatic inputs—its use in evaluating drainage designs in Britain. Journal of Agricultural Engineering Research, 25, (3), 311-323. (doi:10.1016/0021-8634(80)90070-0)

Armstrong, A.S.B. and Tanton, T.W. (1992) Gypsum applications to aggregated saline sodic clay topsoils. European Journal of Soil Science, 43, (2), 249-260. (doi:10.1111/j.1365-2389.1992.tb00133.x)

Armstrong, A.S.B., Tanton, T.W. and Rycroft, D.W. (1989) Field testing of a new reclamation technique for poorly permeable saline clay soils. Wallingford, Hydraulics Research Ltd

Armstrong, J. and Preston, J.M. (2009) Automating the production of train graphs and the calculation of CUI Values. In, 3rd International Seminar on Railway Operations Modelling and Analysis, Engineering and Optimisation Approaches, Zurich, Switzerland,

Armstrong, L.M., Gu, S. and Luo, K.H. (2010) Study of wall-to-bed heat transfer in a bubbling fluidised bed using the kinetic theory of granular flow. International Journal of Heat and Mass Transfer, 53, (4949-4959)(doi:10.1016/j.ijheatmasstransfer.2010.05.047)

Armstrong, Lindsay-Marie (2011) CFD modelling of the gas-solid flow dynamics and thermal conversion processes in fluidised beds. University of Southampton, School of Engineering Sciences, Doctoral Thesis.

Armstrong, Lindsay-Marie, Gu, Sai and Luo, Kai H. (2010) Two-dimensional and three-dimensional computational studies of hydrodynamics in the transition from bubbling to circulating fluidised bed. Chemical Engineering Journal, 160, (1), 239-248. (doi:10.1016/j.cej.2010.02.032)

Armstrong, Lindsay-Marie, Gu, Sai and Luo, Kai H. (2011) Eulerian-eulerian modeling of the desulphurisation process in a coal bubbling fluidised bed. In, UK Heat Transfer Conference, Leeds, City and Borough of, GB, 30 Aug - 01 Sep 2011. 12pp.

Armstrong, Lindsay-Marie, Gu, Sai and Luo, Kai H. (2011) CFD investigation into post-combustion carbon capture. At Institute of Physics: Current Research in Combustion Meeting, Loughborough, GB,

Armstrong, Lindsay-Marie, Gu, Sai and Luo, Kai H. (2011) Three-dimensional multiphase modeling of the desulphurisation process in a coal bubbling fluidised bed. In, Institute of Physics: Current Research in Combustion Meeting, Loughborough, GB,

Arnell, N.W., Livermore, M.J.L., Kovats, S., Levy, P.E., Nicholls, R., Parry, M.L. and Gaffin, S.R. (2004) Climate and socio-economic scenarios for global-scale climate change impact assessments: characterising the SRES storylines. Global Environmental Change, 14, (1), 3-20. (doi:10.1016/j.gloenvcha.2003.10.004)

Arnell, Nigel, Warren, Rachel and Nicholls, R.J. (2007) Response to 'The Stern Review: A Dual Critique'. World Economics, 8, (1), 229-231.

Arredondo, M., Lebart, K., Lane, D. and Serrurier, A. (2004) Recovery of 3D information from underwater images. In, 13th International Symposium on Unmanned Untethered Submersible Technolgy, Durham, USA, Aug 2003.

Arsene, C.T.C., Strickland, M.A., Laz, P.J. and Taylor, M (2008) Comparison of two methods for probabilistic finite element analysis of total knee replacement. In, 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Porto, Portugal,

Arundell, M., Perry, V.H. and Newman, T.A. (2011) Integration of a macro/micro architectured compartmentalised neuronal culture device using a rapid prototyping moulding process. Lab on a Chip(doi:10.1039/c1lc20120d) (Submitted)

Asadollahbaik, A. and Molinari, M. (2008) Modelling and simulation of moth-eye photonic crystal structures. In, Photon 08, Edinburgh, Scotland, 26 - 29 Aug 2008. Institute of Physics1pp.

Asif, M., Arshad, M.R. and Wilson, P.A. (2005) AGV guidance system: an application of simple active contour for visual tracking. In, Proceedings of Enformatika: Transactions on Engineering, Computing and Technology. Enformatika 2005 Madrid, Spain, World Academy of Science, Engineering and Technology, 74-77.

Asimakis, S., Petropoulos, P., Poletti, F., Leong, J.Y.Y., Ebendorff-Heidepriem, H., Moore, R.C., Frampton, K.E., Feng, X., Loh, W.H., Monro, T.M. and Richardson, D.J. (2006) Efficient four-wave-mixing at 1.55 microns in a short-length dispersion shifted lead silicate holey fibre. In, ECOC 2006 Proceedings. ECOC 2006 France, Société de l'Electricité. de l'Electronique et des Technologies de l'Information et de la Communication, 2pp.

Astley, J. (2008) Infinite elements. In, Magoulès, F. (ed.) Computational Methods for Acoustics Problems. Stirling, Scotland, Saxe-Coberg, 37-68.

Astley, Jeremy, Sugimoto, Rie and Mustaphi, Prateek (2010) The application of computational aeroacoustics (CAA) to automated liner optimisation of turbofan ducts. In, 17th International Congress on Sound and Vibration (ICSV), Cairo, EG, 18 - 22 Jul 2010. 8pp.

Astley, R.J. (1983) Wave envelope and infinite elements for acoustical radiation. International Journal for Numerical Methods in Fluids, 3, (5), 507-526. (doi:10.1002/fld.1650030506)

Astley, R.J. (1985) A finite element, wave envelope formulation for acoustical radiation in moving flows. Journal of Sound and Vibration, 103, (4), 471-485. (doi:10.1016/S0022-460X(85)80016-X)

Astley, R.J. (1987) Letter to the editor. A comparative note on the effects of local versus bulk reaction models for air moving ducts lined on all sides. Journal of Sound and Vibration, 117, (1), 191-197. (doi:10.1016/0022-460X(87)90445-7)

Astley, R.J. (1992) Finite elements in solids and structures. An introduction, London, GB, Chapman & Hall (Springer), 364pp.

Astley, R.J. (1996) FE mode-matching schemes for the exterior Helmholtz problem and their relationship to the FE-DtN approach. [in special issue: Communications in Numerical Methods in Engineering] International Journal for Numerical Methods in Biomedical Engineering, 12, (4), 257-267. (doi:10.1002/(SICI)1099-0887(199604))

Astley, R.J. (1996) Transient wave envelope elements for wave problems. Journal of Sound and Vibration, 192, (1), 245-261. (doi:10.1006/jsvi.1996.0186)

Astley, R.J. (1998) Mapped spheroidal wave-envelope elements for unbounded wave problems. International Journal for Numerical Methods in Engineering, 41, (7), 1235-1254. (doi:10.1002/(SICI)1097-0207(19980415)41:7<1235::AID-NME331>3.0.CO;2-V)

Astley, R.J. (1998) Transient spheroidal elements for unbounded wave problems. Computer Methods in Applied Mechanics and Engineering, 164, (1-2), 3-15. (doi:10.1016/S0045-7825(98)00044-9)

Astley, R.J. (2000) Infinite elements for wave problems: a review of current formulations and an assessment of accuracy. International Journal for Numerical Methods in Engineering, 49, (7), 951-976. (doi:10.1002/1097-0207(20001110)49:7<951::AID-NME989>3.0.CO;2-T)

Astley, R.J. (2007) Numerical acoustic modeling (finite element modeling). In, Crocker, M.J. (ed.) Handbook of Noise and Vibration Control. UK, John Wiley and Sons, 101-115.

Astley, R.J. (2008) Infinite elements. In, Marburg, Steffen and Nolte, Bodo (eds.) Computational Acoustics of Noise Propagation in Fluids-Finite and Boundary Element Methods. Berlin, Germany, Springer-Verlag, 197-230.

Astley, R.J., Achunche, I. and Sugimoto, R. (2009) Automatic liner optimisation for bypass ducts. In, Euronoise 2009, Edinburgh, Scotland, 26 - 28 Oct 2009. St. Albans, UK, Institute of Acoustics10pp.

Astley, R.J. and Bain, J.G. (1986) A three-dimensional boundary element scheme for acoustic radiation in low mach number flows. Journal of Sound and Vibration, 109, (3), 445-465. (doi:10.1016/S0022-460X(86)80381-9)

Astley, R.J., Bettess, P. and Clark, P.J. (1991) Mapped infinite elements for exterior wave problems. International Journal for Numerical Methods in Engineering, 32, (1), 207-209. (doi:10.1002/nme.1620320112)

Astley, R.J. and Coyette, J.-P. (2001) Conditioning of infinite element schemes for wave problems. Communications in Numerical Methods in Engineering, 17, (1), 31-41. (doi: 10.1002/1099-0887(200101)17:1<31::AID-CNM386>3.0.CO;2-A)

Astley, R.J., Coyette, J.P. and Cremers, L. (1998) Three-dimensional wave-envelope elements of variable order for acoustic radiation and scattering. Part II. Formulation in the time domain. Journal of the Acoustical Society of America, 103, (1), 64-72. (doi:10.1121/1.421107)

Astley, R.J., Coyette, J.P., Cremers, L. and Macaulay, G.J. (1998) Three-dimensional wave-envelope elements of variable order for acoustic radiation and scattering. Part I. Formulation in the frequency domain. Journal of the Acoustical Society of America, 103, (1), 49-63. (doi:10.1121/1.421106)

Astley, R.J. and Cummings, A. (1984) A finite element scheme for acoustic transmission through the walls of rectangular ducts: Comparison with experiment. Journal of Sound and Vibration, 92, (3), 387-410. (doi:10.1016/0022-460X(84)90387-0)

Astley, R.J. and Cummings, A. (1987) A finite element scheme for attenuation in ducts lined with porous material: Comparison with experiment. Journal of Sound and Vibration, 116, (2), 239-263. (doi:10.1016/S0022-460X(87)81302-0)

Astley, R.J. and Cummings, A. (1995) Wave propagation in catalytic converters: Formulation of the problem and finite element solution. Journal of Sound and Vibration, 188, (5), 635-657. (doi:10.1006/jsvi.1995.0616)

Astley, R.J., Cummings, A. and Sormaz, N. (1991) A finite element scheme for acoustic propagation in flexible-walled ducts with bulk-reacting liners, and comparison with experiment. Journal of Sound and Vibration, 150, (1), 119-138. (doi:10.1016/0022-460X(91)90406-A)

Astley, R.J. and Eversman, W. (1978) A finite element method for transmission in non-uniform ducts without flow: Comparison with the method of weighted residuals. Journal of Sound and Vibration, 57, (3), 367-388. (doi:10.1016/0022-460X(78)90317-6)

Astley, R.J. and Eversman, W. (1979) A finite element formulation of the eigenvalue problem in lined ducts with flow. Journal of Sound and Vibration, 65, (1), 61-74. (doi:10.1016/0022-460X(79)90528-5)

Astley, R.J. and Eversman, W. (1980) The finite element duct eigenvalue problem: An improved formulation with Hermitian elements and no-flow condensation. Journal of Sound and Vibration, 69, (1), 13-25. (doi:10.1016/0022-460X(80)90431-9)

Astley, R.J. and Eversman, W. (1981) Acoustic transmission in non-uniform ducts with mean flow, part II: The finite element method. Journal of Sound and Vibration, 74, (1), 103-121. (doi:10.1016/0022-460X(81)90495-8)

Astley, R.J. and Eversman, W. (1981) Letter to the editor. A note on the utility of a wave envelope approach in finite element duct transmission studies. Journal of Sound and Vibration, 76, (4), 595-601. (doi:10.1016/0022-460X(81)90273-X)

Astley, R.J. and Eversman, W. (1983) Finite element formulations for acoustical radiation. Journal of Sound and Vibration, 88, (1), 47-64. (doi:10.1016/0022-460X(83)90678-8)

Astley, R.J., Eversman, W. and Walkington, N.J. (1982) Accuracy and stability of finite element schemes for the duct transmission problem. AIAA Journal, 20, (11), 1547-1556. (doi:10.2514/3.51219)

Astley, R.J., Gabard, G. and Gamallo, P. (2007) Wave-based computational methods for flow acoustics (Invited Paper). In, 8th International Conference on Theoretical and Computational Acoustics, Heraklion, Crete, 02 - 06 Jul 2007.

Astley, R.J., Gabard, G. and Ponte, P.G. (2007) Wave-based computational methods for flow acoustics. In, 8th International Conference on Theoretical and Computational Acoustics (ICTCA 2007), Heraklion, Greece, 02 - 06 Jul 2007.

Astley, R.J., Gamallo, P. and Gabard, G. (2008) Wave-based numerical methods for acoustics. In, 8th.World Congress on Computational Mechanics (WCCM8): 5th European Congress on Computational Methods in Applied Sciences and Engineeering (ECCOMAS 2008), Venice, Italy, 30 Jun - 05 Jul 2008.

Astley, R.J., Macaulay, G.J. and Coyette, J.P. (1994) Mapped wave envelope elements for acoustical radiation and scattering. Journal of Sound and Vibration, 170, (1), 97-118. (doi:10.1006/jsvi.1994.1048)

Astley, R.J., Stol, K.A. and Harrington, J.J. (1998) Modelling the elastic properties of softwood part 2: The cellular microstructure. Holz als Roh- und Werkstoff, 56, (1), 43-50. (doi:10.1007/s001070050262)

Atkinson, J. K., Glanc, M., Boltryk, P., Sophocleous, M. and Garcia-Breijo, E. (2011) An investigation into the effect of fabrication parameter variation on the characteristics of screen printed thick film silver/silver chloride reference electrodes. Microelectronics International, 28, (2), 49-52. (doi:10.1108/13565361111127368)

Atkinson, J.H., Anagnostopoulos, A.G., Clayton, C. R. I., Bonnechere, F. and Head, K.H. (1995) Incremental loading oedometer test on water-saturated soil. In, Proceedings of the 11th International Conference on Soil Mechanics and Foundation Engineering. 11th International Conference on Soil Mechanics and Foundation Engineering London, GB, International Society for Soil Mechanics and Geotechnical Engineering, 45-62.

Atkinson, P., Cutler, M. and Lewis, H.G. (1997) Mapping sub-pixel variation in land cover in the UK from AVHRR imagery. International Journal of Remote Sensing, 18, (4), 917-935. (doi:10.1080/014311697218836)

Atkinson, P.M., Cutler, M. and Lewis, H.G. (1995) Mapping sub-pixel variation in land cover in the UK from AVHRR imagery. In, Proceedings of the 21st Conference of the Remote Sensing Society. 21st Conference of the Remote Sensing Society: RSS’95 Remote Sensing in Action Nottingham, UK, Remote Sensing and Photogrammetry Society, 58-65.

Attenborough, K. and Wright, M.C.M. (2004) Support mathematics for acoustics research training. Acoustics Bulletin, 29, (5), 28-31.

Audouze, C., De Vuyst, F. and Nair, P.B. (2009) Reduced-order modeling of parameterized PDEs using time-space-parameter principal component analysis. International Journal for Numerical Methods in Engineering, 80, (8), 1025-1057. (doi:10.1002/nme.2540)

Augereau, P. (2001) Feedback control fo the sound inwardly radiated by an aircraft panel excited by a turbulent boundary layer. Southampton, UK, University of Southampton, Institute of Sound and Vibration Research (ISVR Technical Memorandum,(869))

Austin, T.P., Singh, M.M., Gregson, P.J. and Powell, P.M. (2007) Characterisation of fatigue crack growth and related damage mechanisms in FRP-metal hybrid laminates. Composites Science and Technology(doi:10.1016/j.compscitech.2007.11.013)

Avineri, E., Koppen, M., Dahal, K., Sunitiyoso, Y. and Roy, R. (2009) Applications of soft computing: Updating the state of the art, Heidelberg, Germany, Springer, 274pp. (Advances in Soft Computing, 52)

Avramidis, Athanassios N., Chan, Wyean, Gendreau, Michel, L’Ecuyer, Pierre and Pisacane, Ornella (2010) Optimizing daily agent scheduling in a multiskill call center. European Journal of Operational Research, 200, (3), 822-832. (doi:10.1016/j.ejor.2009.01.042)

Avril, Stéphane, Pierron, Fabrice, Pannier, Yannick and Rotinat, René (2008) Stress reconstruction and constitutive parameter identification in elastoplasticity using measurements of deformation fields. Experimental Mechanics, 48, (4), 403-420. (doi:10.1007/s11340-007-9084-2)

Avril, Stéphane, Pierron, Fabrice, Sutton, Michael A. and Yan, Junhui (2008) Identification of viscoplastic parameters and characterization of Lüders behaviour using digital image correlation and the virtual fields method. Mechanics of Materials, 40, (9), 729-742. (doi:10.1016/j.mechmat.2008.03.007)

Ayoub, G., Saikaly, P., El-Fadel, M. and Baydoun, E. (2004) The impact of step-feed on COD and BOD5 removal in rotating biological contactors. Environmental Engineering Science, 21, (5), 558-568. (doi:10.1089/ees.2004.21.558)

Ayoub, G.M., El-Fadel, M., Acra, A. and Robinson, D. (2000) Critical density index for the solar production of bittern from seawater. International Journal of Environmental Studies, 58, (1), 85-97. (doi:10.1080/00207230008711318)

Azad, A.K. and Haq, N. (1999) Germplasm catalogue of Jackfruit in Bangladesh. Southampton, GB, International Centre for Underutilised Crops

Azarpeyvand, M. (2005) Active noise cancellation of a spherical multipole source using a radially vibrating spherical baffled piston. Acoustical Physics, 51, (6), 609-618. (doi:10.1134/1.2130891)

Azarpeyvand, M. (2006) Active control of sound radiated from a spherical source in an acoustic half-space by using a radially vibrating spherical baffled piston. In, Institute of Acoustics Spring Conference 2006: Futures in Acoustics: Today's Research - Tomorrow's Careers, Southampton, UK, 03 - 04 Apr 2006. , 124-125.

Azarpeyvand, M. (2009) Aerodynamic noise reduction using fine structure grids. In, Euronoise 2009, Edinburgh, Scotland, 26 - 28 Oct 2009. St. Albans, UK, Institute of Acoustics17pp.

Azarpeyvand, M., Battaner-Moro, J. and Self, R.H. (2009) Jet noise source distribution for coplanar nozzles: experiments and predictions. In, Euronoise 2009, Edinburgh, Scotland, 26 - 28 Oct 2009. St. Albans, UK, Institute of Acoustics26pp.

Azarpeyvand, M. and Self, R. (2008) Noise prediction of a shortcowl jet using energy transfer rate time-scale. In, Proceedings of the 14th AIAA/CEAS Aeroacoustics Conference (29th AIAA Aeroacoustics Conference), Vancouver, Canada, 05 - 07 May 2008.

Azarpeyvand, M. and Self, R.H. (2009) Improved jet noise modeling using a new time-scale. Journal of the Acoustical Society of America, 126, (3), 1015-1025. (doi:10.1121/1.3192221)

Azarpeyvand, M., Self, R.H. and Vedy, E. (2006) Theoretical and analytical comparison of stochastic noise generation and radiation (SNGR) method and acoustic analogy using a new timescale. In, Institute of Acoustics Spring Conference 2006: Futures in Acoustics: Today's Research - Tomorrow's Careers, Southampton, UK, 03 - 04 Apr 2006. , 368-369.

Azevedo, J.G., Tanton, T.W. and Clarke, D. (2001) Sensitivity analysis of perennial river flows to global warming in semi arid areas of Brazil. In, 4th inter-regional conference on environment and water,, Fortaleza, Brazil, 27 - 30 Aug 2001. , 67-75.

Azrar, L., Benamar, R. and White, R.G. (2000) Non-linear free and forced response of beams at large vibration amplitudes by a semi-analytical method. In, International Conference on Structural Dynamics: Recent Advances, Southampton, UK, 24 - 27 Jul 2000. Southampton, UK, University of Southampton, 401-413.

Azzabi, K.I., Luxmoore, A.R. and Lee, M.M.K. (1993) J-integral estimation for single edge notch specimens in tension. International Journal of Fracture, 63, (1), 75-87. (doi:10.1007/BF00053317)

Baber, C., Hoyes, T.W. and Stanton, N.A. (1993) Comparison of GUIs and CUIs: appropriate ranges of actions and ease of use. Displays, 14, (4), 207-215. (doi:10.1016/0141-9382(93)90090-R)

Baber, C. and Stanton, N.A. (1994) Task analysis for error identification: a methodology for designing error-tolerant consumer products. Ergonomics, 37, (11), 1923-1941. (doi:10.1080/00140139408964958)

Baber, C. and Stanton, N.A. (1996) Human error identification techniques applied to public technology: predictions compared with observed use. Applied Ergonomics, 27, (2), 119-131. (doi:10.1016/0003-6870(95)00067-4) (PMID:15677051)

Baber, C. and Stanton, N.A. (1997) Rewritable routines in human interaction with public technology. International Journal of Cognitive Ergonomics, 1, (4), 237-249.

Baber, C., Stanton, N.A. and Johnson, G.I. (1998) From public technology to ubiquitous computing: implications for ergonomics. Ergonomics, 41, (7), 921-926. (doi:10.1080/001401398186513)

Baber, C., Stanton, N.A. and Stockley, A. (1992) Can speech be used for alarm displays in ‘process control’ type tasks? Behaviour and Information Technology, 11, (4), 216-226. (doi:10.1080/01449299208924340)

Baber, Chris and Stanton, Neville A. (2002) Task analysis for error identification: theory, method and validation. Theoretical Issues in Ergonomics Science, 3, (2), 212-227. (doi:10.1080/14639220210124094)

Babin, P., Phear, A.G. and O'Riordan, N. (2000) Optimisation des méthodes de contrôle du compactage pour la construction de remblais en craie de densité faible à moyenne. In, Correia, Gomes (ed.) Le compactage des sols et des materiaux granulaires. International Society for Soil Mechanics and Geotechnical Engineering, Seminar on Compaction of Soils & Granular Materials , Le compactage des sols et des materiaux granulaires.

Badding, J.V., Sazio, P.J.A., Amezcua Correa, A., Scheidemantel, T.J., Finlayson, C.E., Baril, N.F., Won, D-J., Fang, H., Jackson, B., Borhan, A. and Gopalan, V. (2005) Fabrication of extreme aspect ratio wires within photonic crystal fibers. In, Du, Henry H. (ed.) Photonic Crystals and Photonic Crystal Fibers for Sensing Applications. Optics East 2005 Bellingham, USA, International Society for Optical Engineering, 9pp. (Proceedings of SPIE, 6005). (doi:10.1117/12.632675)

Badin, P. and Serrurier, A. (2006) Three-dimensional linear modeling of tongue: articulatory data and models. In, 7th International Seminar on Speech Production (7th ISSP), Ubatuba, Brazil, 13 - 15 Dec 2006. Brasil, Center for Research on Speech, Acoustics, Language and Music8pp, 395-402.

Badin, P. and Serrurier, A. (2006) Nasals: articulatory data and models. At Journee Nasalite de L'universite de Mons-Hainaut, Mons, Belgium, 05 Jul 2006.

Badin, P. and Serrurier, A. (2006) Three dimensional modelling of speech organs: articulatory data and models. IEIC Technical Report (Institute of Electronics, Information and Communication Engineers), 106, (177), 29-34.

Badin, Pierre, Bailly, Gérard, Elisei, Frédéric, Lamalle, Laurent, Savariaux, Christophe and Serrurier, Antoine (2006) Virtual audiovisual talking heads: data, models and applications. At 62ème Congrès de la Société Française de Phoniatrie et des Pathologies de la Communication (SFP/PACO 2006), Paris, France, 10 Oct 2006.

Baek, Seungin, Roh, Sookyoung, Jeong, Yoonchan and Lee, Byoungho (2006) Experimental demonstration of enhancing pump absorption rate in cladding-pumped ytterbium-doped fiber lasers using pump-coupling long-period fiber gratings. IEEE Photonics Technology Letters, 18, (5), 700-702. (doi:10.1109/LPT.2006.871158)

Bah, M., Browne, M., Xuan, B., Bryan, R. and Young, P. (2011) The influence of stem positioning on bone strains in cementless total hip replacements. In, 2011 Simpleware Users Meeting, Bristol, GB, 09 Nov 2011. 1pp.

Bah, M.T. (2002) Reduced order modelling for efficient prediction of the dynamics of mistuned bladed disks. University of Southampton, School of Engineering Sciences, Doctoral Thesis.

Bah, M.T. and Browne, M. (2004) Failure of the cement mantle in hip implants: a probabilistic approach. In, 50th Annual Meeting of the Orthopaedic Research Society, San Francisco, USA, 07 - 10 Mar 2004. San Francisco, USA, Orthopaedic Research Society.

Bah, M.T., Browne, M. and New, A.M. (2004) Probabilistic analysis of debonding process in cemented hip implants. In, 6th International Symposium in Biomechanics & Biomedical Engineering, Madrid, Spain, 25 - 28 Aug 2004. , 1-6.

Bah, M.T., Browne, Martin, Young, P.G., Bryan, R. and Xuan, V.B. (2011) Effects of implant positioning in cementless total hip replacements. Computer Methods in Biomechanics and Biomedical Engineering, 14, supplement 1, 275-276. (doi:10.1080/10255842.2011.595241)

Bah, M.T., Nair, P.B., Bhaskar, A. and Keane, A.J. (2003) Forced response statistics of mistuned bladed disks: a stochastic reduced basis approach. Journal of Sound and Vibration, 263, (2), 377-397. (doi:10.1016/S0022-460X(02)01058-1)

Bah, M.T., Nair, P.B., Bhaskar, A. and Keane, A.J. (2003) Efficient prediction of the forced response statistics of mistuned bladed discs. In, Eighth International Conference on Recent Advances in Structural Dynamics, Southampton, UK, 14 - 16 Jul 2003.

Bahaj, A. S. (1998) The design and monitoring of the first autonomous solar powered refrigerated trailer. In, Proceedings of the 2nd World Conference and Exhibition on Photovoltaic Solar Energy Conversion. Munchen, Germany, WIP-Renewable Energies, 3145-3148.

Bahaj, A. S. (1998) The world's first autonomous solar powered refrigerated trailer. World Renewable Energy Congress (WREC V), Florence, IT, 20 - 25 Sep 1998.

Bahaj, A. S. (1998) World's first solar powered transport refrigeration system. [in special issue: Renewable Energy Energy Efficiency, Policy and the Environment ] Renewable Energy, 15, (1-4), 572-576. (doi:10.1016/S0960-1481(98)00227-4)

Bahaj, A. S. (2002) Photovoltaic and hybrid village power system: a discussion of sustainability issues. In, Proceedings of PV in Europe - From PV Technology to Energy Solutions. PV in Europe - From PV Technology to Energy Solutions Conference and Exhibition, Rome, Italy, 7-11 October 2002 Florence, IT, Florence Renewable Energies, 1195-1202.

Bahaj, A. S. (2009) Delivering developing country growth: A new mechanistic approach driven by the photovoltaic industry. Renewable and Sustainable Energy Reviews, 13, (8), 2142-2148. (doi:10.1016/j.rser.2009.01.029)

Bahaj, A. S., Currie, A., Jones, S.D.R. and Scott, K (1995) SUNSTROKE: a PC software simulation for photovoltaic system. In, 13th European PV Solar Energy Conference, Nice, FR, 23 - 27 Oct 1995.

Bahaj, A. S. and James, P. A. B. (2000) Southampton University solar campus project PV facade of building 2: installation trials and tribulations. In, Proceedings of 16th European. Photovoltaic Solar Energy Conference and Exhibition. , , 1914-1917.

Bahaj, A. S., James, P. A. B. and Jentsch, M. F. (2007) Photovoltaics: added value of architectural integration. Proceedings of ICE: Energy, 160, (2), 59-69. (doi:10.1680/ener.2007.160.2.59)

Bahaj, A. S., James, P. A. B. and McBride, J.W. (2004) Predicting photovoltaic connector lifetime. In, Proceedings of 3rd World Conference on Photovoltaic Energy Conversion. 3rd World Conference on Photovoltaic Energy Conversion (WPEC3), 12-16 May 2003, Osaka, Japan, Piscataway, United Staes, Institute of Electrical and Electronics Engineers, 2833-2836. (doi:10.1109/WCPEC.2003.1305175)

Bahaj, A. S., James, P.A.B., Ellwood, D.C. and Watson, J.H.P. (1993) Characterisation and growth of magnetotactic bacteria: implication to clean up of environmental pollution. Journal of Applied Physics, 73, (10), 5394-5396. (doi:10.1063/1.353743)

Bahaj, A. S., James, P.A.B. and Moeschler, F.D. (1996) An alternative method for the estimation of the magnetic moment of non-spherical magnetotactic bacteria. IEEE Transactions of Magnetics, 32, (5), 5133-5135. (doi:10.1109/20.539514)

Bahaj, A.B., James, P. and McBride, J. (2002) Photovoltaic connector behaviour under accelerated fretting testing regimes. In, Proceedings of the Forty-Seventh IEEE Holm Conference on Electrical Contacts, 2001. Forty-Seventh IEEE Holm Conference on Electrical Contacts USA, Institute of Electrical and Electronics Engineers, 203-208. (doi:10.1109/HOLM.2001.953212)

Bahaj, A.S, Igra, R.M. and Scurlock, R.G. (1988) The effect of magnetic field strength and orientation on the sensitivity of Southampton diode thermometer in the temperature range 4.2 - 300K. In, Bailey, C.A. (ed.) Proceedings of the Twelfth International Cryogenic Engineering Conference: Southampton, UK, 12-15 July 1988 : ICEC 12. Oxford, Butterworth, 384-388.

Bahaj, A.S, James, P.A.B., Moeschler, F.D., Croudace, I.W. and Warwick, P.E. (1997) Continuous radionuclide recovery from wastewater using magnetotactic bacteria. In, International Conference on Magnetism, Cairns, AU, 27 Jul - 01 Aug 1997.

Bahaj, A.S. (1993) Social and economic assessment of PV applications in the Yemen. In, 11th European Photovoltaic Solar Energy Conference and Exhibition, Montreux, CH,

Bahaj, A.S. (2000) Photovoltaic power for refrigeration of transported perishable goods. In, Conference Record of the Twenty-Eighth IEEE Photovoltaic Specialists Conference. , IEEE, 1563-1566. (doi:10.1109/PVSC.2000.916195)

Bahaj, A.S. (2003) The potential for electricity generation using marine currents energy converters, Year Book of Renewable Energy, 3pp.

Bahaj, A.S. (2005) Solar photovoltaic energy in housing – impact on energy demand and fuel poverty. In, World Renewable Energy Regional Congress, Jakarta, Indonesia, 17 - 21 Apr 2005.

Bahaj, A.S. (2005) The potential of harnessing electrical energy from marine currents. In, Imbabi, M. and Mitchell, P. (eds.) Proceedings of the World Renewable Energy Congress 2005. World Renewable Energy Congress (WREC 2005) , Elsevier Science, 257-264..

Bahaj, A.S. (2005) Solar photovoltaic energy: electricity generation in the built environment. Proceedings of ICE Civil Engineering, Special Issue - Sustainable power, the role for engineers, 158, (6), 45-51. (doi:10.1680/cien.2005.158.6.45)

Bahaj, A.S. (2006) Simulation of extraction of tidal energy within a 2-D coastal finite element numerical model. In, Proceedings World Renewable Energy Congress (WREC-IX), Florence, 19-25 August 2006, Florence, Itlay, 19 - 25 Aug 2006.

Bahaj, A.S. and Bailey, A.G. (1979) Dielectrophoresis of microscopic particles. Journal of Physics D: Applied Physics, 12, (10), L109-L112. (doi:10.1088/0022-3727/12/10/001)

Bahaj, A.S. and Batten, W.M.J. (2006) Experimental verifications of numerical predictions for the hydrodynamic perfomance of horizonatl axis marine current turbines. In, World Renewable Energy Congress (WREC-IX), Florence, Itlay, 19 - 25 Aug 2006.

Bahaj, A.S., Beech, I.B., Campbell, S.J., James, P.A.B. and Walsh, F.C. (1992) The effect of magnetic fields on biofilm formation by sulphate reducing bacteria and its implications in the corrosion of iron and steel. In, US National Science foundation workshop on Biocorrosion & Biofouling, Argentina, 02 - 04 Nov 1992. , 5-12.

Bahaj, A.S. and Blunden, L.S. (2008) Flow through large arrays of tidal energy converters: Is there an analogy with depth limited flow through vegetation? In, World Renewable Energy Congress (WREC-X), Glasgow, GB, 19 - 25 Jul 2008. , CD.

Bahaj, A.S., Braid, R. and James, P.A.B. (2001) An assessment of the building integrated photovoltaic facade and its operational mismatch losses at Southampton University. In, Proceedings of UK-ISES REMlC conference. REMIC Conference Proceedings , Solar Energy Society Publications, 111-118.

Bahaj, A.S., Braid, R.M. and James, P.A.B. (2002) Post installation optimisation of a building integrated PV system at Southampton University. In, 29th IEEE Photovoltaic Specialist Conference. 29th IEEE PV Specialist Conference , IEEE, 1504-1507.

Bahaj, A.S., Braid, R.M. and James, P.A.B. (2003) The importance of sensors in the determination of BIPV parameters and installation energy yield. In, Proceedings of 3rd World Conference on Photovoltaic Energy Conversion 2003. 3rd World Conference on Photovoltaic Energy Conversion (WPEC3) , IEEE, 2046-2049. (doi:10.1109/WCPEC.2003.1306350)

Bahaj, A.S., Campbell, S.A., Walsh, F.C. and Stott, J.F.D. (1992) The importance of environmental factors in microbially-influenced corrosion: Part II. Magnetic field effects. In, Sequeira, C.A.C. and Tiller, A.K. (eds.) Microbial Corrosion: (EFC 8). , Maney, 228-236.

Bahaj, A.S., Croudace, I.W. and James, P.A.B. (1993) Heavy metal removal using magnetotactic bacteria. In, ISSM-93 Conference, Bath, GB, 21 - 24 Sep 1993.

Bahaj, A.S., Croudace, I.W. and James, P.A.B. (1994) Treatment of heavy metal contaminants using magnetotactic bacteria. In, IEEE Transactions on Magnetics. Joint MMM-Intermag Conference , IEEE, 4707-4709.

Bahaj, A.S., Ellwood, D.C. and Watson, J.H.P. (1990) A biomagnetic separation process for the removal of heavy metal ions from solutions. In, Low Temperature Engineering and Cryogenic Conference (LTEC90), Southampton, GB, 17 - 19 Jul 1990.

Bahaj, A.S., Ellwood, D.C. and Watson, J.H.P. (1991) Extraction of heavy metals using microorganisms and high gradient magnetic separation. IEEE Transactions on Magnetics, 27, (6), 5371-5374. (doi:10.1109/20.278842)

Bahaj, A.S., Ghadi, S.M., Al-Ashwal, A. and Shamsan, M.H. (1991) Status of solar energy conversion and applications in Yemen. In, 10th European Photovoltaic Solar Energy Conference, Lisbon, PT,

Bahaj, A.S. and James, P.A.B. (1993) Characterisation of magnetotactic bacteria using image processing techniques. IEEE Transactions on Magnetics, 29, (6), 3358-3360.

Bahaj, A.S. and James, P.A.B. (1997) Photovoltaic roof tiles: Design and integration in buildings. In, Conference on Sustainable Buildings, Oxford, GB, 05 - 06 Feb 1997.

Bahaj, A.S. and James, P.A.B. (2000) Successful trials update for the application of solar refrigeration in food transport. In, 16th European Solar Energy Conference and Exhibition, Glasgow, GB,

Bahaj, A.S. and James, P.A.B. (2001) Mismatch losses in large PV arrays at Southampton University applications. In, 17th European Solar Energy Conference and Exhibition, Munich, Germany,

Bahaj, A.S. and James, P.A.B. (2002) Alternative approaches to achieving PV connector reliability: A comparative study of accelerated lifetime testing. In, Proceedings PV in Europe - PV Technology to Energy Solutions Conference and Exhibition, Rome, Italy, 07 - 11 Oct 2002. , 621-624.

Bahaj, A.S. and James, P.A.B. (2003) Responsive building envelopes for the urban environment. In, CISBAT 2003 Proceedings, Innovation in Building Envelopes and Environmental Systems, Lausanne, Switzerland, 08 - 09 Oct 2003. Oxford, UK, Elsevier.

Bahaj, A.S. and James, P.A.B. (2004) Inverter operating voltage selection for optimum energy yield: Do predictions match reality? In, Proceedings of the 19th European Solar Energy Conference and Exhibition, Paris, France, 07 - 11 Jun 2004.

Bahaj, A.S. and James, P.A.B. (2004) Photovoltaic atrium on a new administration and student services building - University of Southampton. In, Proceedings of the 19th European Solar Energy Conference and Exhibition, Paris, France, 07 - 11 Jun 2004.

Bahaj, A.S. and James, P.A.B. (2004) Multiple string inverters for PV systems < 5kwp: When is this justified? In, Proceedings of the 8th World Renewable Energy Congress (WREC VIII). World Renewable Energy Congress (WREC-VIII) , Elsevier Science, 3000pp.

Bahaj, A.S. and James, P.A.B. (2004) Direct and indirect benefits of grid connected photovoltaics in low energy social housing. In, Proceedings of the 8th World Renewable Energy Congress (WREC VIII). World Renewable Energy Congress (WREC-VIII) , Elsevier Science, 3000pp.

Bahaj, A.S. and James, P.A.B. (2004) EU wide field results of holographic optical elements used for solar control in buildings. In, Proceedings of the 8th World Renewable Energy Congress (WREC VIII), Denver, USA, 29 Aug - 03 Sep 2004. Elsevier Science3000pp.

Bahaj, A.S. and James, P.A.B. (2010) Direct and indirect benefits of grid connected photovoltaics in low energy social housing. Renewable Energy (Submitted)

Bahaj, A.S., James, P.A.B. and Braid, R. (2010) Multiple string inverters for PV systems < 5kWp: When is this justified? Renewable Energy (Submitted)

Bahaj, A.S., James, P.A.B., Ellwood, D.C. and Watson, J.H.P. (1993) Characterisation of magnetotactic bacteria using image processing techniques. In, Digest of International Magnetics Conference, 1993. INTERMAG '93. , IEEE. (doi:10.1109/INTMAG.1993.642594)

Bahaj, A.S., James, P.A.B. and Jentsch, M.F. (2006) Energy flows in domestic buildings: residential combined heat and power (CHP) microgrids. In, Proceedings World Renewable Energy Congress (WREC-IX), Florence, Itlay, 19 - 25 Aug 2006.

Bahaj, A.S., James, P.A.B. and Jentsch, M.F. (2006) A critical appraisal of the added value of BiPV in atria. In, Proceedings 2nd International Conference of Renewable Energy in Maritime Island Climates (REMIC 2). , REMIC, 273-278.

Bahaj, A.S., James, P.A.B. and Jentsch, M.F. (2006) Sustainable refurbishment: quantifying the impact of facade changes in multi-storey, multi-occupancy buildings. In, World Renewable Energy Congress 2006. World Renewable Energy Congress (WREC-IX) , Elsevier Science.

Bahaj, A.S., James, P.A.B., Kirby, C.E. and Watkins, P. (1996) Bioleaching of iron stained silica sand. Transactions Of The Institution Of Mining And Metallurgy,Section C - Mineral Processing And Extractive Metallurgy, (105), C72-C74.

Bahaj, A.S., James, P.A.B. and McBride, J.W (2001) Accelerated lifetime testing of photovoltaic connectors – implications to built environment applications. In, Proceedings of the 17th European solar energy conference. 17th European Solar Energy Conference and Exhibition Munich, Germany, WIP, 630-633.

Bahaj, A.S., James, P.A.B. and McBride, J.W. (2002) Alternative approaches to achieving PV connector reliability: a comparative study of accelerated lifetime testing. In, Proceedings of PV in Europe. From PV Technology to Energy Solutions Conference and Exhibition. PV in Europe. From PV Technology to Energy Solutions Conference and Exhibition Brussels, Belgium, European Commission, Directorate-General for Energy and Transport, 621-624.

Bahaj, A.S., James, P.A.B. and Moeschler, F.D. (1995) Image processing techniques to characterise microorganisms used in the extraction of metals from the environment. In, Colloquium on: Sensors and Systems for Environmental Monitoring and Recycling, Southampton, GB,

Bahaj, A.S., James, P.A.B. and Moeschler, F.D. (1996) High gradient magnetic separation of motile and non-motile magnetotactic bacteria. IEEE Transactions on Magnetics, 32, (5), 5106-5108. (doi:10.1109/20.539505)

Bahaj, A.S., James, P.A.B. and Moeschler, F.D. (1997) Low magnetic field separation system for metal loaded magnetotatic bacteria. In, International Conference on Magnetism, Cairns, AU, 27 Jul - 01 Aug 1997.

Bahaj, A.S., James, P.A.B. and Moeschler, F.D. (1997) Continuous cultivation and recovery of magnetotactic bacteria. IEEE Transactions of Magnetics, 33, (5), 4263-4265. (doi:10.1109/20.619730)

Bahaj, A.S., James, P.A.B. and Moeschler, F.D. (1998) Wastewater treatment by bio-magnetic separation: a comparison of iron oxide and iron sulphide biomass recovery. Water Science and Technology, 38, (6), 311-317.

Bahaj, A.S., James, P.A.B. and Moeschler, F.D. (1998) Low magnetic-field separation system for metal-loaded magnetotatic bacteria. Journal of Magnetism and Magnetic Materials, 177, (181), 1453-1454. (doi:10.1016/S0304-8853(97)00677-X)

Bahaj, A.S., James, P.A.B. and Moeschler, F.D. (1998) A comparative study of the magnetic separation characteristics of magnetotactic and sulphate reducing bacteria. Journal of Applied Physics, 83, (11), 6444-6446. (doi:10.1063/1.367733)

Bahaj, A.S., James, P.A.B. and Mueller, H.F.O (2004) Modern and traditional solar control options for an office in Athens: predicted performance comparisons. In, Proceedings of the 1st Symposium on Technological Development in Daylight Applications, Athens, Greece, 26 - 27 Feb 2004. , 16-19.

Bahaj, A.S., James, P.A.B. and Myers, L.E. (2006) Economics of future energy systems. In, Proceedings of the 8th World Renewable Energy Congress (WREC VIII). World Renewable Energy Congress (WREC-VIII) , Elsevier Science, 3000pp.

Bahaj, A.S., James, P.A.B., Watkins, P. and Kirby, C.E. (1995) Bioleaching of iron stained silica sand. In, UK Minerals Industry Conference, UK, 03 - 05 Apr 1995.

Bahaj, A.S. and Lansdsberg, P.T. (1992) Review. Photovoltaic Engineering Handbook by F. Lasnier and T.G. Ang. Contemporary Physics, 33, (1), 64. (doi:10.1080/00107519208219142)

Bahaj, A.S. and Mohammed, A.S. (1994) Sizing of a photovoltaic pumping system and its storage capacity to meet crop water requirements in remote areas. In, 12th European Photovoltaic Solar Energy Conference, Amsterdam, NL, 11 - 15 Apr 1994.

Bahaj, A.S., Molland, A.F., Chaplin, J.R. and Batten, W.M.J. (2007) Power and thrust measurements of marine current turbines under various hydrodynamic flow conditions in a cavitation tunnel and a towing tank. Renewable Energy, 32, (3), 407-426. (doi:10.1016/j.renene.2006.01.012)

Bahaj, A.S. and Myers, L.E. (2001) Cavitation prediction in operating marine current turbines. In, Proceedings of Renewable Energy in Maritime Island Climates. Renewable Energy in Maritime Island Climates UK, The Solar Energy Society, 222-229. (C76)

Bahaj, A.S. and Myers, L.E. (2002) Fundamentals applicable to the utilisation of tidal current turbines for energy production. In, World Renewable Energy Congress (WREC-VII), Cologne, Germany, 29 Jun - 05 Jul 2002.

Bahaj, A.S. and Myers, L.E. (2003) Fundamentals applicable to the utilisation of marine current turbines for energy production. Renewable Energy, 28, (14), 2205-2211. (doi:10.1016/S0960-1481(03)00103-4)

Bahaj, A.S. and Myers, L.E. (2004) Analytical estimates of the energy yield potential from the Alderney Race (Channel Islands), using marine current energy converters. Renewable Energy, 29, (12), 1931-1945. (doi:10.1016/j.renene.2004.02.013)

Bahaj, A.S., Myers, L.E. and James, P.A.B. (2007) Urban energy generation: Influence of micro-wind turbine output on electricity consumption in buildings. Energy and Buildings, 39, (2), 154-165. (doi:10.1016/j.enbuild.2006.06.001)

Bahaj, A.S., Myers, L.E. and Thompson, G. (2007) Characterising the wake of horizontal axis marine current turbines. In, Seventh European Wave and Tidal Energy Conference, Porto, Portugal, 11 - 14 Sep 2007.

Bahaj, A.S. and Sahooly, A.M. (1995) A chaotic world bank PV initiative in the Yemen. In, Freiesleben, W. (ed.) Thirteenth European Photovoltaic Solar Energy Conference: Proceedings of the International Conference, held at Nice, France 23-27 October, 1995. London, H.S. Stephens, 1071-1073.

Bahaj, A.S. and Ward, S.C. (1994) The `Solatile': a fully adjustable and integrated photovoltaic roof tile. In, Twelfth European Photovoltaic Solar Energy Conference: Proceedings of the International Conference, Held at Amsterdam, The Netherlands 11-15 April 1994. , H.S.Stephens & Associates, 1097-1099.

Bahaj, A.S., Watson, J.H.P., Boorman, C.H. and Watson, S.J. (1985) A superconducting HGMS separator with a current carrying matrix. In, 15th Intrnternational Mineral Processing Congress, Cannes, FR,

Bahaj, A.S., Watson, J.H.P. and Ellwood, D.C. (1989) Determination of magnetic susceptibility of loaded micro-organisms in bio-magnetic separation. IEEE Transactions on Magnetics, 25, (5), 3809-3811. (doi:10.1109/20.42440)

Bahaj, A.S., Watson, J.H.P., Watson, S.J. and Boorman, C.H. (1986) Evaluation of the conditions of rear capture in single wire HGMS. In, Intermag Digest, Phoenix,

Bahaj, A.S., Watson, S.J., Boorman, C.H., Avist, D. and Watson, J.H.P. (1987) The effect of induced turbulence on magnetic capture on a single wire at moderate Reynolds number. In, Intermag - International Magnetics Conference, Tokyo, JP,

Bahaj, A.S. and Zhu, L. (2004) Photovolataic village power system in developing countries: A discussion of sustainability issues. In, Proceedings of the 8th World Renewable Energy Congress (WREC VIII), Denver, USA, 29 Aug - 03 Sep 2004. Elsevier Science3000pp.

Bahaj, AbuBakr S. (2000) The first building integrated photovoltaic cladding on the south coast of the UK. In, Sayigh, A.A. (ed.) World Renewable Energy Congress VI. Renewables: The Energy for the 21st Century World Renewable Energy Congress Oxford, GB, Elsevier, 773-778. (doi:10.1016/B978-008043865-8/50155-0)

Bahaj, AbuBakr S., James, Patrick A.B. and Jentsch, Mark F. (2008) Potential of emerging glazing technologies for highly glazed buildings in hot arid climates. Energy and Buildings, 40, (5), 720-731. (doi:10.1016/j.enbuild.2007.05.006)

Bahrami, M., Melvin, T., Wilkinson, J.S. and Evans, A.G.R. (2004) Micro-fabricated polymerase chain reaction device with integrated fluorescence detection elements. In, Proceedings of 15th MicroMechanics Europe Workshop, Leuven Belgium, 05 - 07 Sep 2004. , 203-206.

Bai, H. and Wu, J. (2005) A flexible camera calibration for freeway scenes. In, First International Conference on Natural Computation (ICNC 2005), a joint event in federation with the Second International Conference on Fuzzy Systems and Knowledge Discovery (FSKD 2005), Changsha, China, 27 - 29 Aug 2005.

Baig, M.F. and Chernyshenko, S.I. (2003) Regeneration mechanism of organized structures in near-wall turbulence. In, Third International Symposium on Turbulence and Shear Flow Phenomena (TSFP-3), Sendai, Japan, 24 - 27 Jun 2003.

Baik, K., Jiang, J. and Leighton, T.G. (2009) First stage investigations of acoustic wave propagation in a liquid-filled cylindrical tube with and without bubbles. Southampton, UK, University of Southampton, 119pp. (ISVR Technical Reports,(328))

Baik, K., Jiang, J. and Leighton, T.G. (2009) Theoretical investigation of phase velocity, group velocity and attenuation of acoustic waves in a liquid-filled cylinder. Southampton, University of Southampton, 48pp. (ISVR Technical Report 329)

Baikie, I.D., Smith, P.J.S., Porterfield, D.M. and Estrup, P.J. (1999) Multitip scanning bio-Kelvin probe. Review of Scientific Instruments, 70, (3), 1842. (doi:10.1063/1.1149678)

Bailey, J.D., Hall, J.L., Reed, P.A.S. and Colbourn, C.J. (1995) CBL in engineering: students' use of a learning resource on phase diagrams. Computers & Education, 25, (1-2), 75-80. (doi:10.1016/0360-1315(95)00043-7)

Bailey, J.D., Reed, P.A.S. and Hall, W. (1994) Interactive computer based learning for engineers. In, IEE Colloquium on Computer-Based Learning in Engineering. Piscataway, USA, Institute of Electrical and Electronics Engineers, 6/1-6/3.

Bailey, J.D., Reed, P.A.S. and Hall, W. (1994) An interactive computer based learning approach for teaching engineering materials. In, Eames, Ian W. and Johnson, Andrew R. (eds.) Computer Aided Learning in Engineering. Sheffield, UK, University of Sheffield, Department of Mechanical & Process Engineering, 59-70.

Bailey, James Ronald (1970) Acoustically induced vibration of and sound radiation from slender beams. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 161pp.

Bailey, Julian Donald (1996) The integration of hypermedia based learning applications into undergraduate engineering degree courses. University of Southampton, School of Engineering Sciences, Doctoral Thesis.

Bailey, N.J., Swinerd, G.G., Lewis, H.G. and Crowther, R. (2009) NEOImpactor - a tool for assessing Earth's vulnerability to the NEO impact hazard. In, 1st IAA Planetary Defense Conference: Protecting Earth from Asteroids, Granada, Spain, 27 - 30 Apr 2009. European Space Agency8pp.

Baker, P., Coggon, D., Reading, I., Barrett, D.S., McLaren, M. and Cooper, C. (2002) Sports injury, occupational physical activity joint laxity and meniscal damage. Journal of Rheumatology, 29, (3), 557-563.

Bakker, N., Chang, C.K., James, P.A.B., Jentsch, M.F., Yau, Y.H. and Bahaj, A.S. (2009) User feedback strategies to enhance the performance of office buildings in tropical climates. In, World Renewable Energy Congress 2009, Bangkok, Thialand, 19 - 22 May 2009.

Balampekou, Ifigeneia, McDonald, Mike and Zheng, Pengjun (2009) The potential of handheld traveller information devices to influence travel behaviour in urban areas. In, 16th World Congress on Intelligent Transportation Systems, Stockholmsmassan, Sweden, 21 - 25 Sep 2009.

Balasubramanian, N. and Langdon, Terence G. (2005) An analysis of superplastic flow after processing by ECAP. Materials Science and Engineering: A, 410-411, 476-479. (doi:10.1016/j.msea.2005.08.090)

Baldelli Bombelli, Francesca, Betti, Francesca, Gambinossi, Filippo, Caminati, Gabriella, Brown, Tom, Baglioni, Piero and Berti, Debora (2009) Closed nanoconstructs assembled by step-by-step ss-DNA coupling assisted by phospholipid membranes. Soft Matter, 5, (8), 1639-1645. (doi:10.1039/b816716h)

Ball, G.J. (1984) Laser correlation techniques for the measuremnt of fluctuating scalars in turbulent jets. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 275pp.

Ball, G.J. (2001) Lagrangian modelling of interfaces under high deformation using a free Lagrange technique. In, Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS - CFD 2001). European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS - CFD 2001) Barcelona, Spain, International Center for Numerical Methods in Engineering, 1-18.

Ball, G.J. and East, R.A. (1998) Blast wave attenuation by an aqueous foam sheet: a Free-Lagrange simulation. In, Houwing, A.F.P. (ed.) Proceedings of the 21st International Symposium on Shock Waves. 21st International Symposium on Shock Waves , Panther, 79-84.

Ball, G.J., Howell, B.P., Leighton, T.G. and Schofield, M.J. (2000) Shock-induced collapse of a cylindrical air cavity in water: a Free-Lagrange simulation. Shock Waves, 10, (4), 265-276. (doi:10.1007/s001930000060)

Ball, G.J., Howell, B.P., Leighton, T.G. and Schofield, M.J. (2000) Shock-induced collapse of a cylindrical air cavity in water: a Free-Lagrange simulation. In, Proceedings of the 22nd International Symposium on Shock Waves, London, UK, Jul 1999. , 1363-1368.

Balogh, Levente, Figueiredo, Roberto B., Ungár, Tamás and Langdon, Terence G. (2010) The contributions of grain size, dislocation density and twinning to the strength of a magnesium alloy processed by ECAP. Materials Science and Engineering: A, 528, (1), 533-538. (doi:10.1016/j.msea.2010.09.048)

Balogh, Levente, Ungár, Tamás, Zhao, Yonghao, Zhu, Y.T., Horita, Zenji, Xu, Cheng and Langdon, Terence G. (2008) Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper-zinc alloys. Acta Materialia, 56, (4), 809-820. (doi:10.1016/j.actamat.2007.10.053)

Bamiou, Doris-Eva, Campbell, Nicole G., Musiek, Frank E., Taylor, Rachael, Chong, W.K., Moore, Anthony, van Heyningen, Veronica, Free, Samantha, Sisodiya, Sanjay and Luxon, Linda M. (2007) Auditory and verbal working memory deficits in a child with congenital aniridia due to a PAX6 mutation. International Journal of Audiology, 46, (4), 196-202. (doi:10.1080/14992020601175952)

Bamiou, Doris-Eva, Campbell, Nicole G., Musiek, Frank E., Taylor, Rachael, Chong, W.K., Moore, Anthony, van Heyningen, Veronica, Free, Samantha, Sisodiya, Sanjay and Luxon, Linda M. (2007) Auditory and verbal working memory deficits in a child with congenital aniridia due to PAX6 mutation. Deficiencias en la memoria auditiva y verbal de un niño con aniridia congénita debida a una mutación en el PAX6. International Journal of Audiology, 46, (4), 196-202. (doi:10.1080/14992020601175952)

Bamiou, Doris-Eva and Lutman, Mark E. (2007) Interaction of noise-induced hearing loss and ageing: epidemiological aspects. In, Luxon, Linda M. and Prasher, Deepak (eds.) Noise and its Effects. Chichester, UK, John Wiley & Sons Ltd, 64-84.

Banks, C. J. (1994) Anaerobic digestion of solid and high nitrogen content fractions of slaughterhouse wastes. In, Okos, Martin R., Renkowitz, Marshall and Niranjan, K. (eds.) Environmentally Responsible Food Processing. , American Institute of Chemical Engineers, 103-109. (Aiche symposium series, 300, 90).

Banks, C. J. (2004) Waste as a resource: a discussion paper on the changes needed for the development of a resource recovery based waste strategy. CIWM Scientific and Technical Review, 5, (2), 11-21.

Banks, C. J. and Al-Hakawati, M.S. (1999) Copper removal by polymer immobilised rhizopus oryzae. In, 3rd IWA Specialised Conference on Hazard Assessment and Control of the Environmental Contaminants, Otsu City, Japan, 05 - 08 Dec 1999.

Banks, C. J. and Climenhaga, M.A. (2008) Uncoupling of liquid and solid retention times in anaerobic digestion of catering wastes. At 5th IWA International Symposium on Anaerobic Digestion of Solid Wastes and Energy Crops, Hammamet, Tunisia, 25 - 28 May 2008.

Banks, C. J., Pak, L.N., Abdrashitova, S.A., Aitkeldieva, S.A. and Kurmanbaev, A.A. (2003) Dynamics of bacterial numbers in waste stabilisation ponds in sharply continental climate conditions of the city of Almaty. Isvestiya of the Academy of Sciences Republic of Kazakhstan - Biological and Medical Series, 2003, (2), 64-71.

Banks, C. J. and Wang, Z. (1998) Development of a two phase anaerobic digester for the treatment of mixed abattoir wastes. In, 4th International Symposium on Waste Management in the Agro-Industries, Istanbul, Turkey, 23 - 25 Sep 1998. , 129-136.

Banks, C. J. and Wang, Z. (2005) Treatment of meat wastes. In, Wang, L.K., Hung, Y-T., Lo, H.H. and Yapijakis, C. (eds.) Waste treatment in the food processing industry. USA, CRC Press, 67-100.

Banks, C.J. (1979) Algunas factores biologicas y quimicos y sus usos en el diseno y control de procesos de tratmiento de aguas residuales. In, Association Colombiana de Ingenieros Sanitarios: Diseno de systemas para tratamiento de desechos liquidos, Colombia, Republic of, CO, 44pp, 1-44.

Banks, C.J. (1993) Emerging technologies: options for treatment. In, Proceedings of the 4th annual conference on industrial waste water treatment. London, GB, IBC publications.

Banks, C.J. (1994) Abattoir by-product disposal options: emerging technological solutions. In, Proceedings of the Sino-British Seminar on Industrial Waste Water Management. Beijing, CN, China National Environmental Protection Agency and the British Council, 63-70.

Banks, C.J. (1997) Scavenging trace concentrations of metals. In, Wase, John D.A. and Forster, Christopher (eds.) Biosorbents for Metal Ions. London, GB, Taylor & Francis, 115-140.

Banks, C.J. (2002) The application of Anaerobic Digestion (AD) technology to the treatment of the organic fraction of MSW. In, South West Energy and Environment Group Seminar: Technologies for Treating Residual Municipal Solid Waste, Exeter, GB,

Banks, C.J. (2003) To assess how landfiling could affect the ecology of the far-field aquatic environment. In, 9th International Waste Management and Landfill Symposium, Sardinia, Italy, 06 - 10 Oct 2003.

Banks, C.J. (2004) Water quality improvements by biological treatment: how leachate stress modifies the population dynamics of Asellus aquaticus and Gammarus pulex. In, Proceedings of the 2nd IWA International Young Researcher Conference, Wageningen, Holland, 23 - 24 Apr 2004. IWA368pp.

Banks, C.J. (2004) The use of synthetic sewage for laboratory purposes. In, IWA Young Researchers' conference 2004, Southampton, UK, 23 - 24 Apr 2004. IWA368pp.

Banks, C.J. (2005) A critical evaluation of the analytical techniques used in the microbiological quality control of waste-waters subjected to freeze-thaw stress as typically found in cold waste stabilisation pond systems. In, IWA 6th International Conference on Waste Stabilisation Ponds, Avignon, France, 28 Sep - 01 Oct 2004. IWA330pp, PW7REM3.

Banks, C.J. (2005) Further characterisation of the die-off of microbial pollution indicators subjected to freezing stress: application to cold climate pond wastewater treatment systems. In, IWA 6th International Conference on Waste Stabilisation Ponds, Avignon, France, 28 Sep - 01 Oct 2004. IWA330pp, PW7REM4.

Banks, C.J., Abdrashitova, S.A, Pak, L.N and Koloskov, G.B (2002) An assessment of using waste stabilisation ponds for cleaning of communal sewage in extreme continental climate: laboratory and pilot testing. (In Russian) Biotechnology Theory and Practice,1, 99-107.

Banks, C.J., Abdrashitova, S.A., Pak, L.N. and Koloskov, G.B. (2002) Potential for use of bioponds for treatment of wastewater in conditions of extreme continental climates. In, Proceedings of International Environmental Forum on problems of sustainable development of the Ili-Balkhash basin "Balkhash 2000", Almaty, Kazakhstan,

Banks, C.J., Abdrashitova, S.A. and Torrella, F. (2002) Die-off of faecal organisms in an extreme climate waste stabilisation pond with over winter storage. In, In Proceedings of 5th International IWA Conference on Waste Stabilization Ponds, Auckland, New Zealand, 02 - 05 Apr 2002.

Banks, C.J. and Bloor, M.C. (2005) Acute and sub-lethal toxicity of landfill leachate towards two macro-invertebrates: assessing the remediation potential of constructed wetlands. Journal Process Safety and Environmental Protection, 83, (2), 184-190. (doi:10.1205/psep.03303)

Banks, C.J. and Dacombe, P. (2006) Measuring the resource potential in commercial and industrial wastes from food related businesses. In, In: Waste 2006: Sustainable Waste and Resource Management, The Waste Conference Limited, Warwick, UK, 19 - 21 Sep 2006. , 389-398.

Banks, C.J. and Gaber, N. (2002) Development of a mechanistic model to determine the partitioning of heavy metals in wastewater treatment. In, Proceedings of 5th International conference on Hydroinformatics,, Cardiff, UK, 01 - 05 Jul 2002.

Banks, C.J. and Heaven, S. (2005) Some observations on the effects of accumulated benthic sludge on the behaviour of waste stabilisation ponds. In, Brissaud, F., Picot, B. and Shilton, A. (eds.) Waste Stabilisation Ponds VI. 6th IWA International Conference on Waste Stabilisation Ponds , IWA, 157-165.

Banks, C.J. and Heaven, S. (2007) Anaerobic digestion of maize for energy production in leach-bed reactors. In, 11th IWA conference on Anaerobic Digestion, Brisbane, Australia, 23 - 27 Sep 2007.

Banks, C.J. and Heaven, S. (2007) Effects of pH Control and Methanogenic Effluent Recycle on the Hydrolysis/Acidification Stage of the Anaerobic Digestion of OFMSW Using a Hydraulic Flush Reactor. In, 11th IWA Conference on Anaerobic Digestion, Brisbane, Australia, 23 - 27 Sep 2007.

Banks, C.J. and Heaven, S. (2008) Development of a coarse membrane bioreactor for two-stage anaerobic digestion of biodegradable municipal waste. In, 5th IWA International Symposium on Anaerobic Digestion of Solid Wastes and Energy Crops, Hammamet, Tunisia, 25 - 28 May 2008.

Banks, C.J. and Heaven, S. (2008) Anaerobic digestion of maize in coupled leach-bed and anaerobic filter reactors. In, 5th IWA International Symposium on Anaerobic Digestion of Solid Wastes and Energy Crops, Hammamet, Tunisia, 25 - 28 May 2008.

Banks, C.J., Humphreys, P.N., Pugh, S.Y.R. and Ashley, R.M. (1992) Microbial treatment of low-level radioactive waste. London, GB, UK Department of the Environment, 240pp.

Banks, C.J. and Neylan, D.J. (2008) Plug flow anaerobic digestion of ryegrass as an energy crop. In, 5th IWA International Symposium on Anaerobic Digestion of Solid Wastes and Energy Crops, Hammamet, Tunisia, 25 - 28 May 2008.

Banks, C.J. and Pak, L.N. (2001) An evaluation of waste stabilisation ponds for extreme continental climates: the design of laboratory and pilot scale trials. Izvestiya Akademii Nauk, Academy of Sciences of Kazakhstan, Biological Series 6, 6, 20-30.

Banks, C.J., Pak, L.N. and Rspaev, M.K., Shilton, A.N., Craggs, R.J. and Walmsley, N. (eds.) (2002) Springtime acclimatisation of a winter ice-covered waste stabilisation pond: operational data from 4 experimental units.

Banks, C.J., Salter, A.M. and Chesshire, M. (2006) Potential of anaerobic digestion for mitigation of green house gas emissions and production of renewable energy from agriculture: Barriers and incentives to widespread adoption in Europe. In, The Seventh International Symposium on Waste Management Problems in Agro-Industries, Amsterdam, The Netherlands, 27 - 29 Sep 2006.

Banks, C.J., Sharratt, P.N. and Rashad, A. (1995) Recovery of carboxylic acids from waste blood fermentation. In, IChemE Annual Research Event, Edinburgh, GB, 3pp, 3.

Banks, C.J. and Smallman, D.J. (2003) An evaluation of growth kinetics and oxygen production of two typical green algae (Chlorella and Scenedesmus ) grown under controlled laboratory conditions. In, Shilton, A.N., Craggs, R.J. and Walmsley, N. (eds.) Waste Stabilisation Ponds: Pond Technology for the New Millennium. 5th International IWA conference on Waste Stabilisation Ponds , IWA.

Banks, C.J., Smallman, D.J. and Alhakawati, M.S. (2002) Evaluation of two types of polyurethane for the immobilisation of Rhizopus oryzae for copper uptake. In, Proceedings of the 3rd IWA World Water Congress, Melbourne, Australia, 07 - 12 Apr 2002.

Banks, C.J. and Stentiford, E.I. (2007) Biodegradable municipal solid waste: biotreatment options. Proceedings of the Institution of Civil Engineers: Waste and Resource Management, 160, (1), 11-18. (doi:10.1680/warm.2007.160.1.11)

Banks, C.J. and Stringfellow, A. (2002) Biodigestion of kitchen wastes. In, Proceedings of the Chartered Institute of Waste Management 2002 Conference, Torbay, UK, 18 - 21 Jun 2002.

Banks, C.J. and Stringfellow, A. (2003) Survival of salmonella in the anaerobic digestion of kitchen waste. In, Proceedings of the ninth international waste management and landfill symposium, Sardinia, Italy, 06 - 10 Oct 2003.

Banks, C.J. and Young, E. (1994) The potential application of biosorption to the treatment of water and waste water. In, 5th Annual Conference on Industrial Waste Water Treatment,16-17th Feb 1994, Manchester. London, GB, IBC Publications.

Banks, C.J. and Zhou, J.L. (1993) Colour removal from natural waters by biosorption. In, 15th Federal Convention of Australian Water & Wastewater Association, Queensland, State of, AU, 18 - 23 Apr 1993.

Banks, Charles J., Chesshire, Michael and Stringfellow, Anne (2008) A pilot-scale comparison of mesophilic and thermophilic digestion of source segregated domestic food waste. Water Science and Technology, 58, (7), 1475-1481. (doi:10.2166/wst.2008.513) (PMID:18957762)

Banks, David P., Grivas, Christos, Mills, John D., Eason, Robert W. and Zergioti, Ioanna (2006) Nano-droplets deposited in microarrays by femtosecond Ti:sapphire laser-induced forward transfer. Applied Physics Letters, 89, (193107), 1-3. (doi:10.1063/1.2386921)

Banks, J. and Bressloff, N.W. (2007) Turbulence modeling in three-dimensional stenosed arterial bifurcations. ASME Journal of Biomechanical Engineering, 129, (1), 40-50. (doi:10.1115/1.2401182)

Bansal, A.S. (1977) Dynamic responses of disordered periodic systems. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 169pp.

Banu, S., Birtwell, S., Chen, Y., Galitonov, G., Morgan, H. and Zheludev, N. (2006) High capacity nano-optical diffraction barcode tagging for biological and chemical applications. In, Nano Science and Technology Institute Nanotech - Conference on Nano Electronics & Photonics, Boston, US, 07 - 11 May 2006.

Banu, S., Birtwell, S., Galitonov, G., Whitton, A., Chen, Y., Zheludev, N. and Morgan, H. (2006) Nano-imprinting lithography - a novel way to fabricate diffractive barcoded particles. At 17th workshop on Micromachining, Micromechanics and Microsystems, Southampton, GB, 03 - 05 Sep 2006.

Baramov, L, Tutty, O.R. and Rogers, E. (2002) H∞ control for non-periodic planar channel flows. In, Proceedings of the 40th IEEE Conference on Decision and Control. New York, US, Institute of Electrical and Electronics Engineers, 4950-4955. (doi:10.1109/.2001.980993)

Baramov, L., Tutty, O.R. and Rogers, E. (2004) H-infinity control of nonperiodic two-dimensional channel flow. IEEE Transactions on Control Systems, 12, (1), 111-122. (doi:10.1109/TCST.2003.821951)

Baramov, Lubimor, Tutty, Owen and Rogers, Eric (2003) Robust control of a nonlinear fluidics problem. Lecture notes in Control and Information Sciences, 281, 21-31.

Barber, J., Mellor, B.G. and Wood, R.J.K. (2005) The development of sub-surface damage during high energy solid particle erosion of a thermally sprayed WC-C0-Cr coating. Wear, 259, (1-6), 125-134. (doi:10.1016/j.wear.2005.02.008)

Barber, J.R. and Ciavarella, M. (2000) Contact mechanics. International Journal of Solids and Structures, 37, (1-2), 29-43. (doi:10.1016/S0020-7683(99)00075-X)

Bardet, R.R. (2010) A life cycle assessment method for alternative material selection strategies in boat structures. University of Southampton, Engineering and the Environment, Doctoral Thesis, 227pp.

Bardow, A., Karlin, I.V. and Gusev, A.A. (2006) General characteristic-based algorithm for off-lattice Boltzmann simulations. Europhysics Letters, 75, (3), 434-440. (doi:10.1209/epl/i2006-10138-1)

Baretzky, B., Baró, M.D., Grabovetskaya, G.P., Gubicza, J., Ivanov, M.B., Kolobov, Yu.R., Langdon, T.G., Lendvai, J., Lipnitskii, A.G., Mazilkin, A.A., Nazarov, A.A., Nogués, J., Ovidko, I.A., Protasova, S.G., Raab, G.I., Révész, Á., Skiba, N.V., Starink, M.J., Straumal, B.B., Suriñach, S., Ungár, T. and Zhilyaev, A.P. (2005) Fundamentals of interface phenomena in advanced bulk nanoscale materials. Reviews on Advanced Materials Science, 9, (1), 45-108.

Barik, R.C., Wharton, J.A., Wood, R.J.K. and Stokes, K.R. (2009) Electro-mechanical interactions during erosion-corrosion. Wear(doi:10.1016/j.wear.2009.03.011) (In Press)

Barik, Rakesh Chandra (2006) Environmental factors affecting the marine corrosion performance of nickel aluminium bronze. University of Southampton, School of Engineering Sciences, Doctoral Thesis, 294pp.

Barker, J.A. (2010) Modelling doublets and double porosity. Quarterly Journal of Engineering Geology and Hydrogeology, 43, 259-268. (doi:10.1144/1470-9236/08-095)

Barney, A., De Stefano, A. and Henrich, N. (2007) The effect of glottal opening on the acoustic response of the vocal tract. Acta Acustica united with Acustica, 93, (6), 1046-1056.

Barney, A. and Jackson, P.J.B. (2007) Aerodynamically-based parametric description of the noise envelope in voiced fricatives. The Journal of the Acoustical Society of America, 121, (5, pt 2), 3122.

Barney, A., Jesus, L. and Santos, R. (2008) Investigation of the mechanisms of voicing offset (Invited Paper for Special Session on Speech Communication: Acoustics of Speech Production: Aeroacoustics and Phonation). The Journal of the Acoustical Society of America, 123, (5), 3576. (doi:10.1121/1.2934665)

Barney, Anna, De Stefano, Antonio and Henrich, Nathalie (2005) The effect of glottal opening on the acoustic response of the vocal tract. In, European Acoustics Association Forum Acusticum 2005 Conference, Budapest, 29 Aug - 02 Sep 2005. Budapest, 6pp.

Barney, Anna and Jackson, Philip J.B. (2008) Analysis of frication noise modulation from a physical model. Journal of the Acoustical Society of America, 123, (5), p.3578. (doi:10.1121/1.2934677)

Barrance, Adrian, Schreckenberg, Kathrin and Gordon, James (2009) Conservation through use: Lessons from the Mesoamerican dry forest, London, UK, Overseas Development Institute, 142pp.

Barrera, Gabriela, McLeod, Fraser, Natvig, Marit and Westerheim, Hans (2008) Towards Rational Delivery. ITSS, 21-22.

Barrett, D.S. and Taylor, M. (2001) Influence of lift-off on polyethylene stresses in TKR. In, 47th Annual Meeting of the Orthopaedic Research Society, San Francisco, USA, 25 - 28 Feb 2001. 1pp.

Barrett, G., Baber, C., Stanton, Neville A., MacLeod, I., Newman, P. and Stone, R. (2006) From wearable computers to surgical training: the human factors integration defence technology centre. Journal of Defence Science, 10, 177-185.

Barros, L.L, Riley, M. and Brown, D.C. (2001) Special millennium issue of the EJOR: A global view of industrial logistics. Special millennium issue of European Journal Of Operational Research, 129, (2), 231-234. (doi:10.1016/S0377-2217(00)00219-8)

Barton, DAW, Krauskopf, B and Wilson, R. Eddie (2006) Periodic solutions and their bifurcations in a non-smooth second-order delay differential equation. Dynamical Systems, 21, (3), 289-311. (doi:10.1080/14689360500539363)

Barton, David A.W., Krauskopf, Bernd and Wilson, R. Eddie (2010) Nonlinear dynamics of torsional waves in a drill-string model with spatial extent. Journal of Vibration and Control, 16, (7-8), 1049-1065. (doi:10.1177/1077546309341108)

Barton, I.E., Markham-Smith, D. and Bressloff, N. (2002) Finite volume scheme for the solution of fluid flow problems on unstructured non-staggered grids. International Journal for Numerical Methods in Fluids, 38, (8), 747-768. (doi:10.1002/fld.247)

Barton, M. E., Cresswell, A and Brown, R (2000) Measuring the effect of mixed grading on the maximum dry density of sands. 2001, Geotechnical Testing Journal. ASTM, USA, 24, (1), 121-127.

Barton, M. E. and Cresswell, A.W. (1998) Slope stability in a sand/sandstone borderline material. In, Evangelista, A. and Picarelli, L. (eds.) Proceedings of the Second International Symposium on Hard Rocks, Soft Soils - The Geotechnics of Hard Soils-Soft Rocks. Second International Symposium on Hard Rocks, Soft Soils - The Geotechnics of Hard Soils-Soft Rock Rotterdam, NL, A.A. Balkema, 1051-1055.

Barton, M. E. and McCosker, A.M. (2000) Inclinometer and tiltmeter monitoring of a high chalk cliff. In, Bromhead, E.N., Dixon, N. and Ibsen, M.L. (eds.) Proceedings of the 8th International Symposium on Landslides. 8th International Symposium on Landslides Cardiff, GB, Geoenvironmental Research Council, 127-132.

Barton, M.E. (2002) Early warning of landsliding using weather station data. In, Instability: Planning and Management. International Conference on Instability - Planning and Management London, UK, Thomas Telford, 455-462.

Barton, M.E. (2005) Discussion of ‘Seeking the research frontiers for UK Engineering Geology’ by J.S. Griffiths & M.G. Culshaw, Quarterly Journal of Engineering Geology and Hydrogeology, 37, 317–325. Quarterly Journal of Engineering Geology and Hydrology., 38, (2), 220. (doi:10.1144/1470-9236/05-010)

Barton, M.E. (2007) Do coastal cities have a sustainable long-term future ? In, Proceedings of the 10th IAEG Congress: Engineering Geology for Tomorrow's Cities. 10th IAEG Congress: Engineering Geology for Tomorrow's Cities London, UK, Geological Society.

Barton, M.E. (2007) Sleeping demons and terrified horses: determining the onset of instability. In, McInnes, Robin, Jakeways, Jenny, Fairbank, Helen and Mathie, Emma (eds.) Landslides and Climate Change: Challenges and Solutions. Proceedings of the International Conference on Landslides and Climate Change. International Conference on Landslides and Climate Change London, UK, Taylor & Francis.

Barton, M.E., Hillier, S and Watson, G.V.R (2006) The slip surface in the D Zone of the Barton Clay. Quarterly Journal of Engineering Geology and Hydrology, 39, (4), 357-370. (doi:10.1144/1470-9236/06-003)

Bartosh, Y. and Banks, C.J. (2006) Algal growth response in a range of light and temperature conditions: implications for non-steady-state conditions in waste stabilisation ponds. In, 7th IWA Specialist Group Conference on Waste Stabilization Ponds: Advances in Pond Technology and Management, Bangkok, Thailand, 25 - 27 Sep 2006. IWA Publishing.

Bashevoy, M., Jonsson, F., Zheludev, N. and Garciade, F.J. (2006) Visualization of plasmons in metallic nanostructures using cathodo-luminescence. In, Society of Photo-Optical Instrumentation Engineers Optics and Photonics, San Diego, US, 13 - 17 Aug 2006.

Bashevoy, M.V., Fedotov, V.A. and Zheludev, N.I. (2006) Optical whirlpools on resonant metal nanostructures. In, of Photo-Optical Instrumentation Engineers - Optics and Photonics 2006, San Diego, US, 13 - 17 Aug 2006.

Bashevoy, M.V., Jonsson, F., Krasavin, A.V., Zheludev, N.I., Chen, Y. and Stockman, I. (2006) Generation of propagating plasmonic waves on unstructured gold surface by an electron beam. Conference on Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference and Photonic Applications Systems Technologies, QPDA10.

Bashevoy, M.V., Jonsson, F., Krasavin, A.V., Zheludev, N.I., Chen, Y. and Stockman, M.I. (2006) Generating plasmon waves by electron beam excitation. In, 9th International conference on near-field optics, nanophotonics and related techniques, Lausanne, CH, 10 - 15 Sep 2006.

Bashevoy, Maxim, Jonsson, Fredrik and Zheludev, Nikolay (2007) Hyperspectral imaging of plasmonic excitations induced by an electron beam. In, CLEO/QELS 2007: Conference on Lasers and Electro-Optics: Quantum Electronics and Laser Science Conference, Baltimore, USA, 06 - 11 May 2007.

Bashevoy, Maxim V., Jonsson, Fredrik, Zheludev, Nikolay I. and Chen, Yifang (2007) Generation of surface plasmons by electron beam excitation. In, Nanometa 2007: The 1st European Topical Meeting on Nanophotonics and Metamaterials, Seefeld, Austria, 08 - 11 Jan 2007. 1pp.

Basri, B. and Griffin, M.J. (2009) Thresholds for the perception of vibration of the back: effect of backrest inclination. In, 44th UK Conference on Human Responses to Vibration, Loughborough, UK, 07 - 09 Sep 2009. , 65-76.

Bass, Andrew, Aspinall, John, Walters, Graeme and Stanton, Neville (1995) A software toolkit for hierarchical task analysis. Applied Ergonomics, 26, (2), 147-151. (doi:10.1016/0003-6870(95)00004-V)

Bassetti, A. and Morfey, C.L. (2007) An acoustic analogy model for jet-noise prediction. In, 13th AIAA/CEAS Aeroacoustics Conference (28th AIAA Aeroacoustics Conference), Rome, Italy, 21 - 23 May 2007. , 4pp.

Bassetti, A., Morfey, C.L. and Harper-Bourne, M. (2007) Impact of the source-correlation model in jet-noise prediction by acoustic analogy. In, 13th AIAA/CEAS Aeroacoustics Conference (28th AIAA Aeroacoustics Conference), Rome, Italy, 21 - 23 May 2007. USA, American Institute of Aeronautics and Astronautics18pp.

Basso, Lorenzo, Belyaev, Alexander, Moretti, Stefano and Shepherd-Themistocleous, Claire (2009) Phenomenology of the minimal B-L extension of the standard model: Z′ and neutrinos. Physical Review D, 80, (5), 055030. (doi:10.1103/PhysRevD.80.055030)

Bates, Paul D., Dawson, Richard J., Hall, Jim W., Horritt, Matthew S., Nicholls, Robert J., Wicks, Jon and Hassan, Mohamed Ahmed Ali Mohamed (2005) Simplified two-dimensional numerical modelling of coastal flooding and example applications. Coastal Engineering, 52, (9), 793-810. (doi:10.1016/j.coastaleng.2005.06.001)

Battaner-Moro, J.P. and Self, R.H.K.R. (2004) A study of the effects of atmospheric conditions and microphone position in open-air aircraft noise tests. In, 10th AIAA/CEAS Aeroacoustics Conference, Manchester, UK, 10 - 12 May 2004. , 12.

Batten, M. and Powrie, W. (2000) Measurement and analysis of temporary prop loads at Canary Wharf underground station, east London. Proceedings of the ICE - Geotechnical Engineering, 143, (3), 151-163. (doi:10.1680/geng.2000.143.3.151)

Batten, W M.J. (2006) Experimental and numerical analysis of marine current turbines. In, International Networking for Young Scientists from the United Kingdom and Malaysia in Renewable Energy Technology, Shanghai, 11 - 14 Dec 2006.

Batten, W.M.J. and Bahaj, A.S. (2006) CFD simulation of a small farm of horizontal axis marine current turbines. In, Sayigh, A.A.M. (ed.) World Renewable Energy Congress 2006. World Renewable Energy Congress (WREC-IX) , Elsevier Science.

Batten, W.M.J. and Bahaj, A.S. (2007) An assessment of growth scenarios and implications for ocean energy industries in Europe. In, Seventh European Wave and Tidal Energy Conference, Porto, Portugal, 11 - 13 Sep 2007.

Batten, W.M.J. and Bahaj, A.S. (2008) Comparing energy yields from fixed and yawing horizontal axis marine current turbines in the English channel. In, Proceedings of the 27th International Conference on Offshore Mechanics and Arctic Engineering OMAE 2008, Estoril, Portugal, 15 - 20 Jun 2008.

Batten, W.M.J., Bahaj, A.S. and Blunden, L. (2006) Development of a methodology for CFD simulations of farms of marine current turbines. In, Renewable energy in maritime island climates : REMIC 2. 2nd International Conference of Renewable Energy in Maritime Island Climates , The Solar Energy Society, 157-162.

Batten, W.M.J., Bahaj, A.S., Molland, A.F., Chaplin, J. R. and Sustainable Energy Research Group (2007) Experimentally validated numerical method for the hydrodynamic design of horizontal axis tidal turbines. Ocean Engineering, 34, (7), 1013-1020. (doi:10.1016/j.oceaneng.2006.04.008)

Batten, W.M.J., Bahaj, A.S., Molland, A.F. and Chaplin, J.R. (2004) Hydrodynamics of marine current turbines. In, Proceedings of the 8th World Renewable Energy Congress (WREC VIII). World Renewable Energy Congress (WREC-VIII) , Elsevier Science, 3000pp.

Batten, W.M.J., Bahaj, A.S., Molland, S., Blunden, F. and Chaplin, J.R. (2006) Yawed performance of horizontal axis turbines in marine currents. International solar energy society, 151-156.

Batten, W.M.J., Bressloff, N.W. and Turnock, S. (2002) Transition from vortex to wall driven turbulence production in the Taylor-Couette system with a rotating inner cylinder. International Journal for Numerical Methods in Fluids, 38, (3), 207-226. (doi:10.1002/fld.208)

Batten, W.M.J., Bressloff, N.W. and Turnock, S.R. (2002) Numerical simulation of the evolution of Taylor cells from a growing boundary layer on the inner cylinder of a high radius ratio Taylor-Couette system. Physical Review E, 66, (6), 066302-[5pp]. (doi:10.1103/PhysRevE.66.066302)

Baumann, O.N. and Elliott, S.J. (2005) A comparison of centralised and decentralised control using inertial actuators. In, European Acoustics Association Forum Acusticum 2005 Conference, Budapest, 29 August-2 September 2005, Budapest, Hungary, 29 Aug - 02 Sep 2005.

Baumann, O.N. and Elliott, S.J. (2006) Centralised and decentralised control of a vibrating plate using inertial actuators. In, IXth International Conference on Recent Advances in Structural Dynamics, Southampton, UK, 17 - 19 Jul 2006. Southampton, UK, University of Southampton, Institute of Sound and Vibration Research13pp.

Baumann, O.N. and Elliott, S.J. (2007) Global optimization of distributed output feedback controllers. The Journal of the Acoustical Society of America, 122, (3), 1587-1594. (doi:10.1121/1.2756796)

Baumann, O.N. and White, P.R. (2004) A new metric for objective segmentation evaluation. In, Proceedings of the Sixth International Conference on Mathematics in Signal Processing, Cirencester, UK, 14-16 December 2004, Cirencester, UK, 14 - 16 Dec 2004. , 35-38.

Baumann, Oliver N. and Elliott, Stephen J. (2006) Decentralised control using multiple velocity feedback loops with inertial actuators. In, Proceedings of the Sixth International Symposium on Active Noise and Vibration Control, ACTIVE 2006, Adelaide, Australia, 18 - 20 Sep 2006. 13pp.

Baumann, Oliver Nicholas (2004) Connected operators for unsupervised image segmentation. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 214pp.

Baumann, Oliver Nicholas and Elliott, Stephen John (2007) The stability of decentralized multichannel velocity feedback controllers using inertial actuators. Journal of the Acoustical Society of America, 121, (1), 188-196. (doi:10.1121/1.2400674)

Baumann, Oliver Nicholas and Elliott, Stephen John (2007) Destabilization of velocity feedback controllers with stroke limited inertial actuators. Journal of the Acoustical Society of America, 121, (5), EL211-EL217. (doi:10.1121/1.2731018)

Baumeister, K.J., Astley, R.J., Eversman, W. and White, J. W. (1983) Acoustics in variable area duct - Finite element and finite difference comparisons to experiment. AIAA Journal, 21, (2), 193-199. (doi:10.2514/3.8054)

Bavykin, Dmitry V., Lapkin, Alexei A., Kolaczkowski, Stan T. and Plucinski, Pawel K. (2005) Selective oxidation of alcohols in a continuous multifunctional reactor: ruthenium oxide catalysed oxidation of benzyl alcohol. Applied Catalysis A: General, 288, (1-2), 175-184. (doi:10.1016/j.apcata.2005.04.042)

Bavykin, Dmitry V., Lapkin, Alexei A., Plucinski, Pawel K., Friedrich, Jens M. and Walsh, Frank C. (2005) TiO2 nanotube-supported ruthenium(III) hydrated oxide: a highly active catalyst for selective oxidation of alcohols by oxygen. Journal of Catalysis, 235, (1), 10-17. (doi:10.1016/j.jcat.2005.07.012)

Bavykin, Dmitry V., Parmon, Valentin N., Lapkin, Alexei A. and Walsh, Frank C. (2004) The effect of hydrothermal conditions on the mesoporous structure of TiO2 nanotubes. Journal of Materials Chemistry, 14, (22), 3370-3377. (doi:10.1039/b406378c)

Baxter, Stephen Michael (1984) Modal power distribution in a duct at high frequency. Vol 1 Chapt 1-7, Vol 2 Chapt 8-12. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 703pp.

Bayfield, M.A. (1970) Approximate analysis of catalytic recombination in nonequilibrium nozzle flows. University of Southampton, Department of Aeronautics and Astronautics, Doctoral Thesis, 266pp.

Bearman, P.W., Chaplin, J.R., Fontaine, E., Graham, J.M.R, Herfjord, K., Lima, A., Meneghini, M.R, Schulz, K.W and Willden, R.H.J (2006) Comparison of CFD predictions of multi-mode vortex-induced vibrations of a tension riser with laboratory measurements. In, Proceedings of the 6th International Conference on FSI, AE & FIV+N, ASME PVP Division summer meeting, Vancouver, Canada, 23 - 27 Jul 2006.

Bearman, P.W., Chaplin, J.R., Graham, J.G., Kostense, J.K. and Klopman, G. (1985) The loading on a cylinder in post-critical flow beneath periodic and random waves. In, 4th International Conference on Behaviour of Offshore Structures, Delft, NL, 01 - 05 Jul 1985.

Bearpark, K. and Keane, A.J. (2000) Short term memory in genetic programming. In, Parmee, I.C. (ed.) Evolutionary Design and Manufacture: Selected Papers from ACDM '00. Fourth International Conference on Adaptive Computing in Design and Manufacture (ACDM) London, UK, Springer-Verlag, 309-320.

Bearpark, Keith and Keane, Andy J. (2004) The use of collective memory in genetic programming. In, Jin, Yaochu (ed.) Knowledge Incorporation in Evolutionary Computation. , Springer, 15-36. (Studies in Fuzziness and Soft Computing 167).

Beaumont, R.A., Hamilton, R., Machin, N., Perks, J. and Williams, I. D. (1999) Social awareness of air quality information. Science of the Total Environment, 235, (1-3), 319-329. (doi:10.1016/S0048-9697(99)00215-6)

Beaven, R. (2009) A challenge to modellers to predict the performance of a landfill cell. In, Sardinia 2009 Twelfth International Waste Management and Landfill Symposium, Sardinia, Italy, 05 - 09 Oct 2009.

Beaven, R. P., White, J. K. and Braithwaite, P. (2008) Application of the University of Southampton landfill degradation and transport model (LDAT) to an aerobic treatment field experiment. In, Global Waste Management Symposium, Colorado, USA, 08 - 10 Sep 2008.

Beaven, R.P. (1995) Determination of hydrogeological and geotechnical properties of refuse using a large compression cell. In, Christensen, Thomas H., Cossu, Raffaello and Stegmann, Rainer (eds.) Sardinia 95 Fifth International Landfill Symposium. Cagliari, IT, CISA, Environmental Sanitary Engineering Centre, 745-760.

Beaven, R.P. (2004) The effect of moisture content in controlling landfill gas production and its application to a model for landfill refuse decomposition. In, Waste 2004, Stratford-upon-Avon, UK, 22 - 24 Sep 2004.

Beaven, R.P. (2004) Research into effect of high suction pressures on a horizontal leachate well. In, Waste 2004 Proceedings. Waste 2004, Integrated Waste Management and Pollution Control: Policy and Practice, Research and Solutions , Waste Conference Ltd, 343-352.

Beaven, R.P. (2007) Time lapse electrical imaging to study fluid movement within a landfill. In, Eleventh International Waste Management and Landfill Symposium (Sardinia 2007), Sardinia, Italy, 01 - 05 Oct 2007.

Beaven, R.P. and Harkness, R.M. (1999) Applicability of soil mechanics principles to household wastes. In, Christensen, T.H. and Cossu, R. (eds.) Proceedings of the 7th International Landfill Symposium, Sardinia 99. Cagliari, IT, CISA, 429-436.

Beaven, R.P. and Hudson, A.P. (2002) Description of a tracer experiment for evaluating flows through waste. In, Proceedings of Waste 2002 - Integrated Waste Management and Pollution Control: Research, Policy and Practice. Waste 2002 conference Coventry, UK, Waste Conference Ltd, 693-701.

Beaven, R.P. and Hudson, A.P. (2003) Description of a tracer test through waste and application of a dual porosity model. In, Ninth International Waste Management Symposium (Sardinia 2003), Sardinia, Italy, 06 - 10 Oct 2003.

Beaven, R.P., Hudson, A.P. and Powrie, W. (2002) Interaction of water and gas in saturated household waste. In, Waste 2002 - Integrated Waste Management and Pollution Control: Research, Policy and Practice. Waste 2002 Conference , Waste Conference Ltd, 702-712.

Beaven, R.P., Ivanova, L.K. and Richards, D.J. (2008) Setting a challenge to landfill modellers. Proceedings of the ICE - Waste and Resource Management, 161, (3), 91-98. (doi:10.1680/warm.2008.161.3.91)

Beaven, R.P. and Knox, K. (2001) Operation of a leachate recirculation trial in a landfill test cell. In, Proceedings Sardina 2001, Eighth International Waste Management and Landfill Symposium, Cagliera, Italy, Oct 2001. , 595-604.

Beaven, R.P., Knox, K., Braithwaite, P. and Rosevear, A. (2006) Assessment of issues relating to leachate recirculation. In, Waste 2006, Sustainable Waste and Resource Management, Stratford-upon-Avon, GB, 12 - 14 Sep 2006.

Beaven, R.P. and Powrie, W. (2004) The examination of 3 leachate wells exhumed from a landfill. In, Waste 2004 Proceedings. Waste 2004, Integrated Waste Management and Pollution Control: Policy and Practice, Research and Solutions , Waste Conference Ltd, 333-342.

Beaven, R.P., Powrie, W., Hudson, A.P. and Parkes, D.J. (2006) Compressibility of tyres for use in landfill drainage systems. Waste and Resource Management, 159, (WR4), 173-180. (doi:10.1680/warm.2006.159.4.173)

Beaven, R.P., Powrie, W. and Zardava, K (2011) Hydraulic properties of MSW. In, Zekkos, Dimitrios (ed.) Geotechnical characterization, Field measurements and laboratory testing of Municipal solid Waste. Virginia, US, American Society of Civil Engineers, 1-43.

Beaven, R.P. and Walker, A.N. (1997) Evaluation of the total pollution load of MSW. In, Sardinia 1997, 6th International Landfll Symposium. Padova, IT, CISA, 57-71.

Beaven, R.P. and Woodman, N. (2007) Multi-tracer closed loop tests on a well degraded waste under variable compression. In, Eleventh International Waste Management and Landfill Symposium (Sardinia 2007), Sardinia, Italy, 01 - 05 Oct 2007.

Beaven, Richard P., Powrie, William and Zardava, Kiriaki (2008) Hydraulic properties of MSW. In, Proceedings of the 2008 International Symposium on Waste Mechanics. 2008 International Symposium on Waste Mechanics Reston, US, American Society of Civil Engineers. (doi:10.1061/41146(395)1)

Beaven, Richard P. (2008) Review of responses to a landfill modelling Challenge. Proceedings of the ICE - Waste and Resource Management, 161, (4), 155-166. (doi:10.1680/warm.2008.161.4.155)

Becker, T. and White, P.R. (2006) Independent component analysis using Gaussian mixture models. In, Seventh International Conference on Mathematics in Signal Processing, Cirencester, UK, 18 - 20 Dec 2006. Institute of Mathematics4pp.

Beckett, D.H. (2003) Eigenvalue algorithms and their application to photonic crystal device modelling. University of Southampton, School of Engineering Sciences, Doctoral Thesis.

Beda, A., Jones, A., Simpson, D.M. and Phillips, D.I.W. (2005) Estimation of baroreflex sensitivity during mental stress testing - a comparison of different methods. In, IFMBE Proceedings of the 3rd European Medical and Biological Engineering Conference, IFMBE European Conference on Biomedical Engineering, Prague, Czech Republic, 20-25 November 2005 4pp.

Beda, A. and Simpson, D.M. (2008) Estimating baroreflex sensitivity in individual recordings: predicting errors in estimates from parametric model. In, 5th Conference of the European Study Group on Cardiovascular Oscillations (ESGCO2008), Parma, Italy, 07 - 09 Apr 2008. , 1-4.

Beduz, C. and Scurlock, R.G. (1998) Cryogenic refrigeration below 70k. In, Proceedings of ICEC17, Bournemouth, UK, 14 - 17 Jul 1998. , 17-22.

Beechie, Timothy J., Sear, David A., Olden, Julian D., Pess, George R., Buffington, John M., Moir, Hamish, Roni, Philip and Pollock, Michael M. (2010) Process-based principles for restoring river ecosystems. Bioscience, 60, (3), 209-222. (doi:10.1525/bio.2010.60.3.7)

Beecroft, M., McDonald, M. and Voge, T. (2007) Achieving personal security in future domestic travel - technology and user needs. IET Intelligent Transport Systems, 1, (2), 69-74. (doi:10.1049/iet-its:20060064)

Beecroft, M. E. and McDonald, M. (2007) Some implications of transportation technologies. Consumer Policy Review, 17, (3), 89-93.

Beecroft, M.E. (2003) Transport and land-use planning: integration or disintegration? Croner's Environment Magazine, 10

Beecroft, M.E. and McDonald, M. (2005) Bespoke services for personal travel and goods movement. Proceedings of the Institution of Civil Engineers: Engineering Sustainability, 158, (2), 83-88. (doi: 10.1680/ensu.158.2.83.67122)

Beecroft, M.E. and McDonald, M. (2008) The changing transport network. In, Alan, Lovell (ed.) With the Advantage of Hindsight: A New Look at Transport. , Institution of Highways & Transportation.

Beecroft, M.E., McDonald, M., Lyons, G.D and Bell, M.C (2006) FUTURES: Future Urban Technologies: Undertaking Research to Enhance Sustainability. In, 13th World Congress on Intelligent Transport Systems and Services, London, UK, 08 - 12 Oct 2006.

Beesley, Angela, Tsapatsaris, Nikolaos, Weiher, Norbert, Tromp, Moniek, Evans, John, Dent, Andy, Harvey, Ian and Schroeder, Sven L.M. (2007) Microreactor cells for high throughput x-ray absorption spectroscopy. In, Choi, Jae-Young and Seungyu, Rah (eds.) Synchrotron Radiation Instrumentation: Ninth International Conference on Synchrotron Radiation Instrumentation. Synchrotron Radiation Instrumentation: Ninth International Conference on Synchrotron Radiation Melville, USA, American Institute of Physics, 1735-1738. (AIP Conference Proceedings, 879). (doi:10.1063/1.2436403)

Bektas, T., Oguz, O. and Ouveysi, I. (2007) A Lagrangean relaxation and decomposition algorithm for the video placement and routing problem. European Journal of Operational Research, 182, (1), 455-465. (doi:10.1016/j.ejor.2006.07.031)

Belcher, Brian and Schreckenberg, Kathrin (2007) Commercialisation of non-timber forest products: A reality check. Development Policy Review, 25, (3), 355-377. (doi:10.1111/j.1467-7679.2007.00374.x)

Belfiore, S., Birkmann, J., Castellan, A., Cavaletti, A., Hettiarachchi, S., Nicholls, R.J., Beirne, W., Soares, J.M.D., Stephenson, F., Trumbic, I., Villagran de Leon, J.C. and Arthurton, R. (2009) Hazard awareness and risk mitigation in integrated coastal area management. France, United Nations Educational, Scientific and Cultural Organization, 145pp. (Intergovernmental Oceanographic Commission: Manuals and Guides No. 50,(ICAM Dossier No. 5))

Bell, D.J., Lu, T.J., Fleck, N.A. and Spearing, S.M. (2005) MEMS actuators and sensors: observations on their performance and selection for purpose. Journal of Micromechanics and Microengineering, 15, S153-S164. (doi:10.1088/0960-1317/15/7/022)

Bell, S. (2005) Does ARX estimation of auditory evoked potentials replace the need for coherent averaging? In, Signal Processing Applications in Clinical Neurophysiology, IPEM Meeting, Portland Place, London, 22 February 2005

Bell, S.L. (2008) How shall we measure the VEMP? In, British Academy of Audiology Annual Conference, Liverpool, UK, 26 - 28 Nov 2008.

Bell, S.L., Allen, R. and Lutman, M.E. (2001) The feasibility of maximum length sequences to reduce acquisition time of the middle latency response. Journal of the Acoustical Society of America, 109, (3), 1073-1081. (doi:10.1121/1.1340645)

Bell, S.L., Lv, J., Manders, A.J. and Simpson, D.M. (2007) A bootstrap approach to the detection of auditory evoked potentials. In, Butinar, Dušan (ed.) XX IERASG Biennial Symposium: Programme and Book of Abstracts. XX Biennial Symposium of the International Evoked Response Audiometry Study Group (IERASG) Slovenia, Slovene Society for Clinical Neurophysiology of the Slovene Medical Association, 87.

Bell, Steven L. (2009) Filtering to match hearing aid insertion gain to individual ear acoustics. Trends in Amplification, 13, (3), 181-189. (doi:10.1177/1084713809344974)

Bell, Steven L., Allen, Robert and Lutman, Mark E. (2002) Optimizing the acquisition time of the middle latency response using maximum length sequences and chirps. Journal of the Acoustical Society of America, 112, (5), 2065-2073. (doi:10.1121/1.1508791)

Bell, Steven L., Smith, David C., Allen, Robert and Lutman, Mark E. (2006) The auditory middle latency response, evoked using maximum length sequences and chirps, as an indicator of adequacy of anesthesia. Anesthesia and Analgesia, 102, (2), 495-498. (doi:10.1213/01.ane.0000189191.71449.48)

Bellamy, Kathryn, Limbert, G., Waters, Mark G. and Middleton, J. (2003) An elastomeric material for facial prostheses: synthesis, experimental and numerical testing aspects. Biomaterials, 24, (27), 5061-5066. (doi:10.1016/S0142-9612(03)00412-5)

Bello, J.O., Wharton, J.A. and Wood, R.J.K. (2003) Evalutaion of the adhesive properties of downhole corrosion resistant polymeric coatings by cathodic disbondment. In, Corrosion NACE, 2003. Texas, USA, NACE International.

Bello, J.O. and Wood, R.J.K. (2000) Wireline wear resistance of dual layer and single layer polymeric coatings. Sixth Postgraduate Conference in Engineering Materials

Bello, J.O. and Wood, R.J.K. (2005) Micro-abrasion of filled and unfilled polyamide 11 coatings. Wear, 258, (1-4), 294-302. (doi:10.1016/j.wear.2004.08.008)

Bello, J.O., Wood, R.J.K. and Wharton, J.A. (2007) Synergistic effects of micro-abrasion–corrosion of UNS S30403, S31603 and S32760 stainless steels. Wear, 263, (1 - 6), 149-159. (doi:10.1016/j.wear.2006.12.044)

Belo, Eduardo Morgado (1987) The use of the complex summation method for formulating algorithms for decoupling vertical/horizontal motions of rolling aircraft. University of Southampton, Department of Aeronautics and Astronautics, Doctoral Thesis, 245pp.

Belyaev, A., Christidi, I.A., De Roeck, A., Godbole, R.M., Mellado, B., Nyffeler, A., Petridou, C. and Roy, D.P. (2009) Working group report: Dictionary of Large Hadron Collider Signatures. Pramana, 72, (1), 229-237. (doi:10.1007/s12043-009-0019-6)

Belyaev, A.S., Shapiro, I.L. and do Vale, M.A.B. (2007) Torsion phenomenology at the CERN LHC. Physical Review D, 75, (3), 034014. (doi:10.1103/PhysRevD.75.034014)

Belyaev, Alexander, Cao, Qing-Hong, Nomura, Daisuke, Tobe, Kazuhiro and Yuan, C.-P. (2008) Light minimal supersymmetric standard model Higgs boson scenario and its test at hadron colliders. Physical Review Letters, 100, (6), 061801-061804. (doi:10.1103/PhysRevLett.100.061801)

Belyaev, Alexander, Guedes, Renato, Moretti, Stefano and Santos, Rui (2010) Very light Higgs Bosons in extended models at the LHC. Physical Review D, 81, (9), 095006. (doi:10.1103/PhysRevD.81.095006)

Ben Gaied, Nouha, Richardson, James A., Singleton, Daniel G., Zhao, Zhengyun, French, David and Brown, Tom (2010) End-capped HyBeacon probes for the analysis of human genetic polymorphisms related to warfarin metabolism. Organic & Biomolecular Chemistry(doi:10.1039/C001177K)

Ben Tahar, M., Gabard, G. and Treyssede, F. (2004) FEM method for vibro-acoustic problems with non-potential mean flow. In, International Conference on Advances in Mechancial Engineering, Sousse, Tunisia, 24 - 26 Mar 2004.

Ben Tahar, M., Treyssede, F. and Gabard, G. (2001) Elastoacoustic propagation and radiation with non uniform mean flow by BEM/FEM formulation in a mixed Euler-Lagrange representation. In, 5th International Conference on Theoretical and Computational Acoustics, Beijing, China,, 21 - 25 May 2001.

Benassi, L. and Elliott, S.J. (2004) Suppression of plate vibrations using a modified inertial actuator. In, Proceedings of Institute of Acoustics Spring Conference, Institute of Sound and Vibration Research, Southampton, UK, 29-30 March 2004 , 567-578.

Benassi, L. and Elliott, S.J. (2004) Active vibration isolation using an inertial actuator with local displacement feedback control. Journal of Sound and Vibration, 278, (4-5), 705-724. (doi:10.1016/j.jsv.2003.10.065)

Benassi, L. and Elliott, S.J. (2005) Global control of a vibrating plate using a feedback-controlled inertial actuator. Journal of Sound and Vibration, 283, (1-2), 69-90. (doi:10.1016/j.jsv.2004.03.039)

Benassi, L., Elliott, S.J. and Gardonio, P. (2004) Active vibration isolation using an inertial actuator with local force feedback control. Journal of Sound and Vibration, 276, (1-2), 157-79. (doi:10.1016/j.jsv.2003.07.019)

Bennell, Julia A., Han, W., Zhao, X. and Song, X. (2012) Construction heuristics for two-dimensional irregular shape bin packing with guillotine constraints. Southampton, GB, University of Southampton (Submitted)

Bennouna, M.M.K (1981) Nonlinear dynamic behaviour of a clamped-clamped beam with consideration of fatigue life. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 305pp.

Bentman, Susanna, O’Sullivan, Cliona and Stokes, Maria (2010) Thickness of the middle trapezius muscle measured by rehabilitative ultrasound imaging: description of the technique and reliability study. Clinical Physiology and Functional Imaging, 30, (6), 426-431. (doi:10.1111/j.1475-097X.2010.00960.x) (PMID:20812996)

Bento-Coelho, J.L. (1983) Acoustic characteristics of perforate liners in expansion chambers. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 277pp.

Berardi, U., Mace, B.R., Rustighi, E. and Sarban, R. (2010) Dynamic testing and modelling of deap push actuators. At International Conference and Exhibition on New Actuators and Drive Systems - Actuator 2010, Bremen, DE, 14 - 16 Jun 2010.

Berbon, M.Z. and Langdon, T.G. (2000) A discussion of flow mechanisms in superplastic yttria-stabilised tetragonal zirconia. In, MRS Symposium Proceedings: Superplasticity: Current Status and Future Potential. Materials Research Society Symposium HH Warrendale, USA, Materials Research Society, 105-110.

Berbon, P.B., Furukawa, M., Horita, Z., Nemoto, M. and Langdon, T.G. (2000) An examination of the deformation process in equal-channel angular pressing. In, MRS Symposium Proceedings: Superplasticity: Current Status and Future Potential. Materials Research Society Symposium HH Warrendale, USA, Materials Research Society, 347-352. (Materials Research Society Symposium Proceedings, 601).

Berbon, P.B. and Langdon, T.G. (2000) A deformation model for equal-channel angular processing. In, Mishra, R.S., Semiatin, S.L., Suryanarayana, C., Thadhani, N.N. and Lowe, T.C. (eds.) Ultrafine Grained Materials. 2000 TMS Annual Meeting & Exhibition Warrendale, USA, The Minerals, Metals & Materials Society, 381-392.

Beresna, Martynas and Kazansky, Peter G. (2010) Polarization diffraction grating produced by femtosecond laser nanostructuring in glass. Optics Letters, 35, (10), 1662-1664. (doi:10.1364/OL.35.001662)

Beresna, Martynas, Kazansky, Peter G., Deparis, Olivier, Carvalho, Isabel C.S., Takahoshi, Satoshi and Zayats, Anatoly V. (2010) Poling-assisted fabrication of plasmonic nanocomposite devices in glass. Advanced Materials, 22, (39), 4368-4372. (doi:10.1002/adma.201001222)

Berg, Rolf W. and Kerridge, David H. (2004) The NaNO3-KNO3 system: the postion of the solidus and sub-solidus. Dalton Transactions, 15, 2224-2229. (doi:10.1039/B403260H)

Bermudez, A., Gamallo, P., Nogueiras, M.R. and Rodriguez, R. (2006) Approximation of a structural acoustic vibration problem by hexahedral finite elements. IMA Journal of Numerical Analysis, 26, (2), 391-421. (doi:10.1093/imanum/dri032)

Bermudez, A., Gamallo, P. and Rodriguez, R. (2002) Finite element method and local active control of enclosed sound fields (Paper 80931). In, WCCM-V : Fifth World Congress on Computational Mechanics, Vienna, Austria, 07 - 12 Jul 2002. Vienna, Austria, Vienna University of Technology for IACM/European Commission10pp, 1-10.

Bermudez, Alfredo, Gamallo, Pablo, Nogueiras, Maria R. and Rodriguez, Rodolfo (2005) Approximation properties of lowest-order hexahedral Raviart-Thomas finite elements. Comptes Rendus Mathematique, 340, (9), 687-692. (doi:10.1016/j.crma.2005.03.023)

Berrios, M., Siles, J., Martin, M.A. and Martin, M. (2007) A kinetic study of the esterification of free fatty acids (FFA) in sunflower oil. Fuel, 86, (15), 2383-2388. (doi:10.1016/j.fuel.2007.02.002)

Bertuzzo, Enrico, Di Bari, Pasquale, Feruglio , Ferruccio and Nardi , Enrico (2009) Flavor symmetries, leptogenesis and the absolute neutrino mass scale. Journal of High Energy Physics, 11(doi:10.1088/1126-6708/2009/11/036)

Beshara, M., Chohan, G.Y., Keane, A.J. and Price, W.G. (1997) Statistical energy analysis of nonconservatively coupled systems. In, Keane, A.J. and Price, W.G. (eds.) Statistical Energy Analysis: An Overview, with Applications in Structural Dynamics. Cambridge, UK, Cambridge University Press, 113-139.

Beshara, M. and Keane, A.J. (1998) Vibration energy flows between plates with compliant and dissipative couplings. Journal of Sound and Vibration, 213, (3), 511-535. (doi:10.1006/jsvi.1998.1521)

Besio, G., Blondeaux, P., Brocchini, M., Hulscher, S.J.M., Idier, D., Knaapen, M. A. F., Nemeth, A.A., Roos, P.C. and Vittori, G. (2008) The morphodynamics of tidal sand waves: a model overview. Coastal Engineering, 55, (7-8)(doi:10.1016/j.coastaleng.2007.11.004)

Betson, Mark, Barker, John, Barnes, Paul and Atkinson, Tim (2005) Use of synchrotron tomographic techniques in the assessment of diffusion parameters for solute transport in groundwater flow. Transport in Porous Media, 60, (2), 217-223. (doi:10.1007/s11242-004-5737-0)

Bettess, P., Shirron, J., Laghrouche, O., Peseux, B., Sugimoto, R. and Trevelyan, J. (2003) A numerical integration scheme for special finite elements for the Helmholtz equation. International Journal for Numerical Methods in Engineering, 56, (4), 531-552. (doi:10.1002/nme.575)

Bezuijen, A., Muller, G.U. and Wolters, G. (2005) Failure mechanisms for blockwork breakwaters. In, Allsop, N.W.H (ed.) Coastlines, Structures and Breakwaters 2005. International Conference on Coastlines, Structures and Breakwaters 2005 , Thomas Telford, 121-131.

Bhandari, Athma Ram (2009) The mechanics of an unbonded locked sand at low effective stresses. University of Southampton, School of Civil Engineering and the Environment, Doctoral Thesis, 236pp.

Bhaskar, A. (1997) Criticality of daming in multi-degree of freedom systems. Journal of Applied Mechanics, 64, 387-393.

Bhaskar, A. (1997) Rayleigh's classical sensitivity analysis extended to damped and gyroscopic systems. In, IUTAM-IITD International Einter School on Optimum Dynamic Design using Modal Testing and Structural Dynamic Modification, India, 15 - 19 Dec 1997. 14pp.

Bhaskar, A. (2000) Gross modifications in structural dynamics via interpolated modes. In, Proceeding of the 7th International Conference on Recent Advances in Structural Dynamics. Proceedings of 7th Conference on Recent Advances in Structural Dynamics Southampton, UK, Institute of Sound and Vibration Research, University of Southampton, 61-73. (454)

Bhaskar, Atul (2003) Waveguide modes in elastic rods. Proceedings: Mathematical, Physical and Engineering Sciences, 459, (2029), 175-194. (doi:10.1098/rspa.2002.1013)

Bhaskar, Atul (2009) Group velocity as an eigensensitivity problem. In, Proceedings of the 7th EUROMECH Solid Mechanics Conference, Lisbon, PT,

Bhaskar, K.V., Bressloff, N.W., Nair, P.B. and Shearman, C.P. (2008) Predictive haemodynamics in a one-dimensional human carotid artery bifurcation. Part II: application to graft design. IEEE Transactions in Biomedical Engineering, 55, (3), 1176-1184. (doi:10.1109/TBME.2007.912398) (PMID:18334411)

Bhattacharya, Madhav (1979) I.C. engine exhaust noise source characterisation: an analysis and evaluation of experimental techniques. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 185pp.

Bhumbra, R.P., Berman, A.B., Walker, P.S., Barrett, D.S. and Blunn, G.W. (2000) Prevention of loosening in total hip replacements using guided bone regeneration. Clinical Orthopaedics and Related Research, 372, 192-204.

Bianchi, E., Gardonio, P. and Elliott, S.J. (2004) Smart panel with multiple decentralised units for the control of sound transmission. Part III: control system implementation. Journal of Sound and Vibration, 274, (1-2), 215-232. (doi:10.1016/j.jsv.2003.05.006)

Bianchi, G., Aglietti, G.S. and Richardson, G. (2007) Optimization of bolted joints connecting honeycomb panels. In, 1st CEAS, 10th European Conference on Spacecraft Structures, Materials and Mechanical Testing, Berlin, Germany, 10 - 13 Sep 2007.

Bica, A.V.D, Bressani, L.A., Clayton, C.R.I., Soares, J.M.D and Formoso, M.T. (1994) Algumes aplicações de sensores de efeito Hall em instumentaçãõ geotécnica. In, Proceedings of the X Brazilian Congress on Soil Mechanics and Foundation Engineering. X Brazilian Congress on Soil Mechanics and Foundation Engineering Foz do Iguaçú, Brazil, Universidade Federal da Integração Latino-Americana, 327-334.

Bica, A.V.D, Bressani, L.A., Martins, F.B. and Clayton, C.R.I. (1995) Tendências recentes quanto à utilizaçao de ensaios triaxais em Engenharia Geotécnica. In, XXVII Jornadas Sudamericanas de Ingenieria Estructural Tucuman, Argentina, 18 - 22 Sep 1995.

Bica, A.V.D and Clayton, C. R. I. (1993) The use of finite element analyses to optimize the design of boundary total stress cell. In, Proceedings of Congresso Ibero Latino-Americano sobre Metodos Computacionais para a Engenharia. Congresso Ibero Latino-Americano sobre Metodos Computacionais para a Engenharia (XIII CILAMCE) Porto Alegre, BR, Universidade Federal do Rio Grande do Sul, 518-527.

Bica, A.V.D and Clayton, C.R.I. (1989) Hall effect instrumentation for stress and force measurements. Journal of Physics E: Scientific Instruments, 22, (8), 548-551. (doi:10.1088/0022-3735/22/8/002)

Bica, A.V.D and Clayton, C.R.I. (1995) A influência do atrito solo-muro nas tensões horizontais atuates em estruturas de contençao. In, XXVII Jornadas Sudamericanas de Ingenieria, Tucuman, Argentina, 18 - 22 Sep 1995.

Bifulco, P., Cesarelli, M., Allen, R., Romano, M., Fratini, A. and Pasquariello, G. (2010) 2D-3D registration of CT vertebra volume to fluoroscopy projection: A calibration model assessment (doi:10.1155/2010/806094). Eurasip Journal on Advances in Signal Processing, 2010, 8pp. (doi:10.1155/2010/806094)

Bifulco, P., Cesarelli, M., Romano, M., Allen, R. and Cerciello, T. (2009) Vertebrae tracking through fluoroscopic sequence: A novel approach. In, World Congress 2009 Medical Physics and Engineering, Munich, Germany, 07 - 12 Sep 2009. , 619-622.

Biggs, M.J.P., Richards, R.G., McFarlane, S., Wilkinson, C.D.W., Oreffo, R.O.C. and Dalby, M.J. (2008) Adhesion formation of primary human osteoblasts and the functional response of mesenchymal stem cells to 330nm deep microgrooves. Journal of the Royal Society Interface, 5, (27), 1231-1242. (doi:10.1098/rsif.2008.0035)

Bily, Matej (1968) The discontinuity and fatigue crack propagation in mild steel. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 269pp.

Bindi, V., Strunk, J., Baker, J., Bacon, R., Boensel, M., Shoup, F. and Vaidyanathan, R. (2007) Littoral undersea warfare: a case study in process modeling for functionality and interoperability of complex systems. International Journal of System of Systems Engineering, 1, (1)

Bindi, V., Strunk, J., Baker, J., Bacon, R., Boensel, M., Shoup, F. and Vaidyanathan, R. (2007) Littoral undersea warfare: a case study in process modeling for functionality and interoperability of complex systems. In, International Conference on Managing and Engineering in Complex Situations (MECS 2007), Norfolk, USA, 22 - 24 Oct 2007. USA, Managing & Engineering in Complex Situations23pp.

Birgersson, F., Ferguson, N.S. and Finnveden, S. (2003) Application of the spectral finite element method to turbulent boundary layer induced vibration of plates. Journal of Sound and Vibration, 259, (4), 873-891. (doi:10.1006/jsvi.2002.5127)

Birkin, P.R. and Leighton, T.G. (2002) Electrochemical techniques of single bubble events. In, Nyborg, W.L. (ed.) Bubble Detection and Cavitation Monitoring. New York, USA, Acoustical Society of America, 60-63. (ANSI Technical Report S1.24 TR-2002).

Birkin, P.R., Offin, D. and Leighton, T.G. (2007) Cavitation, shockwaves and electrochemistry: an experimental and theoretical approach to a complex environment. In, 19th International Congress on Acoustics (ICA 2007), Madrid, Spain, 02 - 07 Sep 2007. Southampton, UK, Institute of Sound and Vibration Research6pp, 1-6.

Birkin, Peter, Offin, Douglas and Leighton, Timothy (2007) Cavitation, shockwaves and electrochemistry - an experimental and theoretical approach to a complex environment. In, 19th International Congress on Acoustics. Madrid, Spain, Sociedad Española de Acústica, 6pp.

Birkin, Peter R., Leighton, Timothy G., Offin, Douglas G. and Vian, Christopher J.B. (2010) Towards the understanding of a complex cavitation environment - electrochemistry, acoustics and imaging observations. In, Proceedings of Internoise 2010 - Noise and Sustainability. Internoise 2010 - Noise and Sustainability , International Institute of Noise Control Engineering, 9pp.

Birks, E.J., Khaghani, A., Bowles, C., Hunt, D., Pepper, J.R., Banner, N.R. and Yacoub, M.H. (2001) Serum cytokines in left ventricular assist device candidates. Transplantation Proceedings, 33, (1-2), 1974-1975. (doi:10.1016/S0041-1345(00)02759-7)

Birtwell, S.W., Galitonov, G.S., Morgan, H. and Zheludev, N.I. (2007) Superimposed nano-scale diffraction gratings as high capacity barcodes for biological and chemical applications. [In special issue: Optics in Life Sciences]. Optics Communications, 281, (7), 1789-1795. (doi:10.1016/j.optcom.2007.04.066)

Bisbos, C.D., Makrodimopoulos, A. and Pardalos, P.M. (2005) Second order cone programming approaches to static shakedown analysis in steel plasticity. Optimization Methods and Software, 20, (1), 25-52. (doi:10.1080/1055678042000216003)

Bishop, Dan, Felstead, Alan, Fuller, Alison, Jewson, Nick and Unwin, Lorna (2008) Constructing learning: adversarial and collaborative working in the British construction industry. Cardiff, Wales, Cardiff School of Social Sciences, 35pp. (Learning as Work Research Paper,(13))

Bissessur, Prithiraj (2007) Unsteady aerodynamics using high-order methods. University of Southampton, School of Engineering Sciences, Doctoral Thesis, 177pp.

Bittar, R.G., Hyam, J., Nandi, D., Wang, S., Liu, X., Joint, C., Bain, P.G., Gregory, R., Stein, J. and Aziz, T.Z. (2005) Thalamotomy versus thalamic stimulation for multiple sclerosis tremor. Journal of Clinical Neuroscience, 12, (6), 638-642. (doi:10.1016/j.jocn.2004.09.008)

Bittar, R.G., Kar-Purkayastha, I., Owen, S.L., Bear, R.E., Green, A., Wang, S. and Aziz, T.Z. (2005) Deep brain stimulation for pain relief: a meta-analysis. Journal of Clinical Neuroscience, 12, (5), 515-519. (doi:10.1016/j.jocn.2004.10.005)

Bittar, R.G., Yianni, J., Wang, S., Liu, X., Nandi, D., Joint, C., Scott, R., Bain, P.G., Gregory, R., Stein, J. and Aziz, T.Z. (2005) Stereotactic and functional neurosurgery resident award: deep brain stimulation for generalized dystonia and spasmodic torticollis: rate and extent of postoperative improvement. Clinical Neurosurgery, 52, 379-383.

Bittar, R.G., Yianni, J., Wang, S., Liu, X., Nandi, D., Joint, C., Scott, R., Bain, P.G., Gregory, R., Stein, J. and Aziz, T.Z. (2005) Deep brain stimulation for generalised dystonia and spasmodic torticollis. Journal of Clinical Neuroscience, 12, (1), 12-16. (doi:10.1016/j.jocn.2004.03.025)

Black, J.H., Barker, J. A. and Woodman, N. (2007) An investigation of 'sparse channel networks': characteristic behaviours and their causes. Stockholm, SE, Svensk Kärnbränslehantering AB (Swedish Nuclear Fuel and Waste Management Co)

Blainey, S. (2009) Modelling local rail demand in South Wales. In, 41st Annual Conference of the Universities' Transport Study Group, London, United Kingdom, Jan 2009.

Blainey, S.P. (2008) Some Issues in Modelling New Local Rail Services. In, 40th Annual Conference of the Universities' Transport Study Group, Southampton, UK, January, Southampton, UK, 03 - 05 Jan 2008.

Blainey, S.P. and Preston, J.M. (2009) Assessing the potential performance of new local railway stations. In, European Transport Conference, Noordwijkerhout, The Netherlands, 05 - 06 Oct 2009. 18pp.

Blainey, S.P. and Preston, J.M. (2010) A geographically weighted regression based analysis of rail commuting around Cardiff, South Wales. In, 12th World Conference on Transport Research, Lisbon, PT, 11 - 15 Jul 2010.

Blainey, Simon (2010) Trip end models of local rail demand in England and Wales. Journal of Transport Geography, 18, (1), 153-165. (doi:10.1016/j.jtrangeo.2008.11.002)

Blainey, Simon P. and Preston, John M. (2010) Modelling local rail demand in South Wales. Transportation Planning and Technology, 33, (1), 55-73. (doi:10.1080/03081060903429363)

Blake, J.I.R., Shenoi, R.A., House, J. and Turton, T. (2001) Progressive damage analysis of tee joints with viscoelastic inserts. Composites Part A: Applied Science and Manufacturing, 32, (5), 641-653. (doi:10.1016/S1359-835X(00)00158-5)

Blanco, Max and Wilson, P.A. (2012) A review of external hydrodynamics with experimental data assessment for low speed ocean flow. Journal of Fluids Engineering (In Press)

Blanco, Max and Wilson, Phillip (2010) Autonomous underwater vehicle minimum-time navigation in a current field. In, Oceans 2010, Seattle, US, 20 - 23 Sep 2010. 4pp.

Blandeau, V. and Joseph, P. (2009) A semi-analytical model for broadband noise prediction from rotor-wake interaction in contra-rotating propfans. In, Pawelczyk, M. and Bismor, D. (eds.) Proceedings of 16th International Congress on Sound and Vibration: Recent Developments in Acoustics, Noise and Vibration (ICSV16). 16th International Congress on Sound and Vibration: Recent Developments in Acoustics, Noise and Vibration (ICSV16) Krakow, Poland, International Insitute of Acoustics and Vibration, 8pp.

Blandy, Susan E and Lutman, Mark E. (2005) Hearing threshold levels and speech recognition in noise in 7-year-olds. International Journal of Audiology, 44, (8), 435-443. (doi:10.1080/14992020500189203)

Bleeck, S., Fox, P.D., White, P.R. and O'Meara, N. (2008) Auditory models and nonlinear filter banks in underwater auralization. In, 2nd ASA-EAA Joint Conference, Acoustics '08, Paris, France, 29 Jun - 04 Jul 2008.

Bleeck, S., Ingam, N., Verhey, J. and Winter, I.M. (2005) Wideband suppression in cochlear nucleus: a role in grouping by common onset? In, 28th Annual MidWinter Research Meeting, Association for Research in Otolaryngology, New Orleans, USA, 22 Feb 2005.

Bleeck, S., Ingham, N., Verhey, J. and Winter, I.M. (2008) Rebound depolarisation in single units of the ventral cochlear nucleus: a contribution to grouping by common onset? Neuroscience, 154, (1), 139-146. (doi:10.1016/j.neuroscience.2008.03.020)

Bleeck, S., Ingham, N.J., Verhey, J.L. and Winter, I.M. (2004) A role for wideband inhibition in grouping by common onset. In, British Society of Audiology Short Papers Meeting on Experimental Studies of Hearing and Deafness, London, UK, 16 - 17 Sep 2004.

Bleeck, S. and Langner, G. (2001) Functional significance of latency in the auditory system. In, Greenberg, S. and Slaney, M. (eds.) Computational Models of Auditory Function: Proceedings of the NATO Advanced Study Institute on Computational Hearing. NATO Advanced Study Institute on Computational Hearing Amsterdam, IOS Press, 205-220.

Bleeck, S. and Patterson, R.D. (2003) Predicting the relative strength of sinusoidal and residue pitches using damped sinusoids. At British Society of Audiology Short Papers Meeting on Experimental Studies of Hearing and Deafness, Nottingham, UK, 14 - 15 Sep 2003.

Bleeck, S. and Patterson, R.D. (2003) A comprehensive model of sinusoidal and residue pitch. In, Pitch Meeting, Oldenburg, Germany, 12 - 16 Jun 2003.

Bleeck, S., Patterson, R.D. and Winter, I.M. (2003) Using genetic algorithms to find the most effective stimulus for sensory Neurons. Journal of Neuroscience Methods, 125, (1-2), 73-82. (doi:10.1016/S0165-0270(03)00040-2)

Bleeck, S. and Winter, I.M. (2006) A model of vental cochlear nucleus units based on first order intervals. In, BSA Short Papers Meeting on Experimental Studies of Hearing and Deafness, London, UK, 14 - 15 Sep 2006. British Society of Audiology.

Bleeck, S. and Winter, I.M. (2007) A brainstem vocoder based on a model of the ventral cochlear nucleus. In, Thirtieth Annual Midwinter Research Meeting, Association for Research in Otolaryngology, Denver, USA, 09 - 16 Feb 2007.

Bleeck, S., Wright, M. and Winter, I.M. (2007) Can first-order spike statistics from single cells in the cochlear nucleus be used for a Bayesian filter? In, British Society of Audiology Short Papers Meeting on Experimental Studies of Hearing and Deafness, London, UK, 20 - 21 Sep 2007. (Submitted)

Bleeck, Stefan, Fox, Paul D., White, Paul R. and O'Meara, Niamh (2008) Auditory models and nonlinear filterbanks in underwater auralization. [in special issue: Program Abstracts for Acoustics '08] Journal of the Acoustical Society of America, 123, (5), 3344-3344. (doi:10.1121/1.2933893)

Bleeck, Stefan, Sayles, Mark, Ingham, Neil J. and Winter, Ian M. (2006) The time course of recovery from suppression and facilitation from single units in the mammalian cochlear nucleus. Hearing Research, 212, (1-2), 176-184. (doi:10.1016/j.heares.2005.12.005)

Bleeck, Stefan and Winter, Ian (2006) A model of the cochlear nucleus based on first order interval distributions. In, Proceedings of the 14th International Symposium on Hearing (ISH2006), Cloppenburg, Germany, 18 - 23 Aug 2006.

Blenkinsopp, C.E. and Chaplin, J.R. (2005) Measurements of air/water interfaces in plunging breaking waves. In, 20th International Workshop on Water Waves and Floating Bodies, Longyearbyen, Norway, 29 May - 01 Jun 2005.

Blenkinsopp, C.E. and Chaplin, J.R. (2007) Validity of small-scale physical models involving breaking waves. In, 22nd International workshop on water waves and floating bodies (Proceedings), Plitvice, Croatia, 15 - 18 Apr 2007. , 13-16.

Blenkinsopp, C.E. and Chaplin, J.R. (2007) Void fraction measurements in breaking waves. Proceedings of the Royal Society A, 463, (2088), 3151-3170. (doi:10.1098/rspa.2007.1901)

Blenkinsopp, C.E. and Chaplin, J.R. (2008) The effect of relative crest submergence on wave breaking over submerged slopes. Coastal Engineering, 55, (12), 967-974. (doi:10.1016/j.coastaleng.2008.03.004)

Blom, A.P. (1969) Shock tube measurements of vibrational energy excitation and de-excitation rates in carbon monoxide using infrared techniques. University of Southampton, Department of Aeronautics and Astronautics, Doctoral Thesis, 258pp.

Bloodworth, A. G. and Houlsby, G.T. (2000) Three dimensional analysis of building settlement caused by shaft construction. In, Kusakabe, O., Fukita, K. and Miyazaki, Y. (eds.) Geotechnical Aspects of Underground Construction in Soft Ground: Proceedings of the International Symposium. Geotechnical Aspects of Underground Construction in Soft Ground Rotterdam, NL, Taylor & Francis, 607-612.

Bloodworth, A. G. and Macklin, S.R. (2000) Ground and structure response to a hand driven decline in London clay. In, Kusakabe, O., Fukita, K. and Miyazaki, Y. (eds.) Geotechnical Aspects of Underground Construction in Soft Ground: Proceedings of the International Symposium. Geotechnical Aspects of Underground Construction in Soft Ground Rotterdam, NL, Taylor & Francis, 75-80.

Bloodworth, A.G. (2004) Advanced polymer composite and concrete beam and slab systems. In, Advanced polymer composites for structural applications in construction. International Conference Advanced polymer composites for structural applications in construction (ACIC 2004) Cambridge, UK, Woodhead, 327-334.

Bloodworth, A.G., Houlsby, G.T., Burd, H.J. and Augarde, C.E. (2001) Three-dimensional modelling of the interaction between buildings and tunnelling operations. In, Proceedings of the International Conference on the response of buildings to excavation-induced ground movements, London, United Kingdom, 17 - 18 Jul 2001. 10pp.

Bloodworth, A.G., Jackson, P.A. and Lee, M.M.K. (2003) Strength of reinforced concrete pile caps. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 156, (4), 347-358. (doi:10.1680/stbu.156.4.347.37843)

Bloodworth, Alan G., Xu, Ming, Banks, James R and Clayton, Chris R.I. (2011) Predicting the earth pressure on integral bridge abutments. Journal of Bridge Engineering(doi:10.1061/(ASCE)BE.1943-5592.0000263)

Bloor, M.C and Banks, C.J. (2003) Assessment of the acute and chronic toxicity of leachate to two aquatic invertebrates, and possible toxicity reduction by reed bed treatment. In, 4th International Symposium on Waste Treatment Technologies (Thermal, Non-Thermal and Gas Clean-up) Conference, Sheffield, UK,

Bloor, M.C and Banks, C.J. (2003) Assessing how landfilling could affect the ecology of the far-field aquatic environment. In, 3rd European Bioremediation Conference, Chania, Greece,

Bloor, M.C and Banks, C.J. (2004) Water quality improvements by constructed wetlands: how leachate stress modified the population dynamics of two macro-invertebrates. In, 4th IWA UK Young Researchers Conference, Southampton, UK, 2004.

Bloor, M.C, Banks, C.J. and Krivtsov, V. (2005) Acute and sub-lethal toxicity tests to monitor the impact of leachate on an aquatic environment. Environment International, 31, (2), 269-273. (doi:10.1016/j.envint.2004.10.010)

Bloor, M.C. and Banks, C. J. (2005) Acute and sub-lethal toxicity of landfill leachate towards two aquatic macro-invertebrates: demonstrating the remediation potential of air stripping. Environment International, 31, (8), 1114-1122. (doi:10.1016/j.envint.2005.03.002)

Bloor, M.C. and Banks, C.J. (2003) The reduction of leachate toxicity to two aquatic invertebrates by air stripping trials. In, Proceedings of the 8th European Biosolids and Organic Residuals Conference, Wakefield, UK, 23 - 26 Nov 2003.

Bloor, M.C. and Banks, C.J. (2004) Mixed species toxicity tests to monitor the impact of leachate on an aquatic environment. In, Annual Main Meeting of the Society for Experimental Biology 2004, Edinburgh, UK, 29 Mar - 02 Apr 2004. Elsevier.

Bloor, M.C. and Banks, C.J. (2006) Acute and sub-lethal toxicity of landfill leachate towards two aquatic macro-invertebrates: demonstrating the remediation potential of aerobic digestion. Hydrobiologia, 556, (1), 387-397. (doi:10.1007/s10750-005-1201-6)

Bloor, M.C., Banks, C.J. and Krivtsov, V. (2006) Population dynamics in Asellus aquaticus as modified by chronic leachate stress. Engineering Geology, 85, (1-2), 9-13. (doi:10.1016/j.enggeo.2005.09.021)

Blumensath, T. and Davies, M.E. (2009) Compressed sensing signal models - to infinity and beyond? In, SAMPTA'09, Marseille, France, 18 - 22 May 2009.

Blumensath, T. and Davies, M.E. (2009) How to use the interative hard thresholding algorithm. In, SPARS09, France, Republic of, FR, 06 - 09 Apr 2009.

Blunden, L. and Bahaj, A.S. (2005) A high resolution model of the English Channel for tidal stream resource assessment. In, Proceedings of the 6th European Wave & Tidal Energy Conference. 6th European Wave & Tidal Energy Conference , EWTEC, 51-58.

Blunden, L.S. and Bahaj, A.S. (2007) Tidal energy resource assessment for tidal stream generators. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221, (2), 137-146. (doi:10.1243/09576509JPE332)

Boghosian, B.M., Love, P.J., Coveney, P.V., Karlin, I.V., Succi, S. and Yepez, J. (2003) Galilean-invariant lattice-Boltzmann models with H theorem. Physical Review E, 68, (2), 025103. (doi:10.1103/PhysRevE.68.025103)

Bolaños, Western, Carvajal, Joan J., Mateos-Planas, Xavier, Murugan, Ganapathy Senthil, Subramanian, Ananth Z., Wilkinson, James S., Cantelar, Eugenio, Jaque, Daniel, Lifante, Ginés, Aguiló, Magdalena and Díaz, Francisco (2010) Mirrorless buried waveguide laser in monoclinic double tungstates fabricated by a novel combination of ion milling and liquid phase epitaxy. Optics Express, 18, (26), 26937-26945. (doi:10.1364/OE.18.026937)

Bolland, Benjamin J.R.F. (2008) Mechanical and biological augmentation of allograft and synthetic graft in impaction bone grafting. University of Southampton, School of Medicine, Doctoral Thesis, 197pp.

Bolton, John Stuart (1984) Cepstral techniques in the measurement of acoustic reflection coefficients with applications to determination of acoustic properties of elastic porous materials. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis, 272pp.

Bolton, M.D. (1988) Discussion: The collapse of diaphragm walls. Géotechnique, 38, (2), 324-325. (doi:10.1680/geot.1988.38.2.324)

Bolton, M.D., Britto, A.M. and White, T.P. (1989) Finite element analysis of a centrifuge model retaining wall embedded in overconsolidated clay. Computers and Geotechnics, 7, (4), 289-318. (doi:10.1016/0266-352X(89)90014-1)

Bolton, M.D. and Powrie, W. (1987) The collapse of diaphragm walls retaining clay. Géotechnique, 37, (3), 335-353. (doi:10.1680/geot.1987.37.3.335)

Bolton, M.D. and Powrie, W. (1988) Behaviour of diaphragm walls in clay prior to collapse. Géotechnique, 38, (2), 167-189. (doi:10.1680/geot.1988.38.2.167)

Bolton, M.D., Powrie, W. and Stewart, D.I. (1987) Effects on diaphragm walls of groundwater pressure rising in clays. In, Groundwater effects in geotechnical engineering : proceedings of the Ninth European Conference on Soil Mechanics and Foundation Engineering, Dublin, 31 August - 3 September, 1987. IX ECSMFE , AA Balkema, 759-762.

Bolton, M.D., Powrie, W. and Symons, I.F. (1989) The design of stiff in situ walls retaining overconsolidated clay part 1: short term behaviour. Ground Engineering, 22, (8/9), 34-47.

Bolton, M.D., Powrie, W. and Symons, I.F. (1990) The design of stiff in situ walls retaining overconsolidated clay part 2: long-term behaviour. Ground Engineering, 23, (2), 22-28.

Bolton, M.D., Powrie, W. and Symons, I.F. (1990) The design of stiff in situ walls retaining overconsolidated clay. Part 1: Short term behaviour. Part 2: Long term behaviour. Wokingham, GB, Transport and Road Research Laboratory, 24pp. (Contractor Report 199)

Bolton, M.D., Powrie, W. and Symons, I.F. (1990) The design of stiff in situ walls retaining overconsolidated clay part 1: short term behaviour. Ground Engineering, 23, (1)

Bolton, M.D. and Stewart, D.I. (1988) The design of deep in situ walls. In, Corte, Jean-Francois (ed.) Centrifuge 88: Proceedings of the International Conference on Geotechnical Centrifuge Modelling. Centrifuge 88 Paris, FR, Taylor & Francis, 405-414.

Boltryk, P., Hill, M. and White, P.R. (2004) Peak-finding methods for improving the resolution of a sonar-based correlation velocity log. In, Proceedings of the Institute of Acoustics Symposium on Sonar Signal Processing. Institute of Acoustics Symposium on Sonar Signal Processing St. Albans, UK, Instititue of Acoustics, 206-213.

Boltryk, P.J., Hill, M. and McBride, J.W. (2009) Comparing laser and polychromatic confocal optical displacement sensors for the 3D measurement of cylindrical artefacts containing microscopic grooved structures. [In special issue: Metrology and Properties of Engineering Surfaces]. Wear, 266, (5-6), 498-501. (doi:10.1016/j.wear.2008.04.082)

Boltryk, P.J., Hill, M., McBride, J.W. and Nasce, A. (2006) A comparison of precision optical displacement sensors for the 3-D measurement of complex surface profiles. In, 20th Eurosensors Conference Anniversary (Eurosensors XX), Göteborg, Sweden, 17 - 20 Sep 2006.

Boltryk, P.J., Hill, M., McBride, J.W., Nascè, A., Bewley, N. and Prentice, W. (2007) Non-contact surface metrology for preservation and sound recovery from mechanical sound recordings. In, JTS 2007: Audio Visual Heritage and the Digital Universe, Toronto, Canada, 28 - 30 Jun 2007.

Boltryk, Peter J., Hill, Martyn, McBride, John W. and Nascè, Antony (2008) A comparison of precision optical displacement sensors for the 3-D measurement of complex surface profiles. [In special issue: Eurosensors XX The 20th European conference on Solid-State Transducers - Eurosensors 2006, Eurosensors 20th Edition]. Sensors and Actuators A: Physical, 142, (1), 2-11. (doi:10.1016/j.sna.2007.03.006)

Boltryk, Peter Jan (2004) The development of an acoustic navigational aid for autonomous underwater vehicles. University of Southampton, School of Engineering Sciences, Doctoral Thesis.

Bonar, J.M., Willoughby, A.F.W., Dan Aihua McGregor, B.M. and Cooke, G.A. (2000) RTA Injection of point defects into B-doped Si and SiGe. In, Mass and Charge Transport in Inorganic Materials - Fundamentals to Devices 1. Mass and Charge Transport in Inorganic Materials Faenza, IT, Techna, 461-468. (Advances in Science and Technology, 29).

Bondarenko, Maksym (2008) Master-mode set of turbulent 3D channel flow. University of Southampton, School of Engineering Sciences, Doctoral Thesis, 137pp.

Bonello, P., Brennan, M.J. and Elliott, S.J. (2004) Vibration control using a tunable vibration absorber with a variable shape stiffness element. In, Proceedings of the Institute of Acoustics Spring Conference 2004. Institute of Acoustics Spring Conference 2004 St. Albans, UK, Institiute of Acoustics, 534-545.

Bonello, P., Brennan, M.J. and Elliott, S.J. (2004) The design of an adaptive tuned vibration absorber with a variable shape stiffness element. Southampton, UK, University of Southampton, Institute of Sound and Vibration Research, 81pp. (ISVR Technical Memorandum,(941))

Bonello, P., Brennan, M.J. and Holmes, R. (2002) Non-linear modelling of rotor dynamic systems with squeeze film dampers: an efficient integrated approach. Journal of Sound and Vibration, 249, (4), 743-773. (doi:10.1006/jsvi.2001.3911)

Bonello, P., Brennan, M.J. and Holmes, R. (2004) The prediction of the non-linear dynamics of a squeeze-film damped aero-engine rotor housed in a flexible support structure. Institution of Mechanical Engineers, Journal of Aerospace Engineering, 218, (3), 213-30. (doi:10.1243/0954410041872843)

Bonello, Philip, Brennan, Michael J., Elliott, Stephen J., Vincent, Julian F.V. and Jeronomidis, George (2005) Designs for an adaptive tuned vibration absorber with variable shape stiffness element. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 461, (2064), 3955-3976. (doi:10.1098/rspa.2005.1547)

Bonello, Philip, Brennan, Michael J. and Holmes, Roy (2004) A study of the non-linear interaction between an eccentric squeeze film damper and an unbalanced flexible rotor. Journal of Engineering for Gas Turbines and Power, 126, (4), 855-866. (doi:10.1115/1.1787503)

Bonello, Phillip, Brennan, Michael J. and Elliott, Stephen J. (2005) Vibration control using an adaptive tuned vibration absorber with a variable stiffness element. Smart Materials and Structures, 14, 1055-65. (doi:10.1088/0964-1726/14/5/044)

Boor, M., Banks, C. J. and Krivtsov, V. (2006) How leachate stress modified the population dynamics of two macro-invertebrates: water quality improvements by constructed wetlands? Proceedings - International Association of Theoretical and Applied Limnology, 29, (3), 1507-1510.

Boorman, C., Watson, J. and Bahaj, A. (1987) Magnetic filtration studies using a permanently magnetised matrix. IEEE Transactions on Magnetics, 23, (5), 2755. (doi:10.1109/TMAG.1987.1065712)

Boorman, R. and Yu, H.-T. (1996) Measurement of prop loads in a large braced excavation during construction of the JLE station at Canada Water, East London. In, Nair, R.J. and Taylor, R.N. (eds.) Geotechnical Aspects of Underground Construction in Soft Ground. International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground London, GB, Taylor & Francis, 57-62.

Boorsma, K., Zhang, X. and Molin, N. (2009) Landing gear noise control using perforated fairings. Acta Mechanica Sinica, 26, (2), 159-174. (doi:10.1007/S10409-009-0304-0)

Boorsma, K., Zhang, X., Molin, N. and Chow, L.C. (2009) Bluff body noise control using perforated fairings. AIAA Journal, 47, (1), 33-43. (doi:10.2514/1.32766)

Booth, James Edward (2008) The feasibility of using electrostatic charge condition monitoring for lubricant additive screening. University of Southampton, School of Engineering Sciences, Doctoral Thesis, 290pp.

Boothalingam, S. and Lineton, B. (2009) Effect of contralateral acoustic stimulation on cochlear tuning measured using OAEs. At British Society of Audiology Short Papers Meeting on Experimental Studies of Hearing and Deafness, Southampton, U.K., 17 - 18 Sep 2009.

Boothman, D.P., Lee, M. and Sumpter, J.G.D. (1999) J estimation for shallow semi-elliptical surface cracks in wide plates under pure bending. Fatigue & Fracture of Engineering Materials & Structures, 22, (5), 399-408. (doi:10.1046/j.1460-2695.1999.00170.x)

Boothman, D.P., Lee, M.M.K. and Luxmoore, A.R. (1996) The sensitivity of J-integrals to material law variations for semi-elliptical surface cracks. International Journal of Fracture, 80, (4), 365-375. (doi:10.1007/BF00018513)

Boothman, D.P., Lee, M.M.K. and Luxmoore, A.R. (1997) A shallow crack assessment scheme for generalised material behaviour in pure bending. Engineering Fracture Mechanics, 57, (5), 493-506. (doi:10.1016/S0013-7944(97)00056-8)

Boothman, D.P., Lee, M.M.K. and Luxmoore, A.R. (1999) The effects of weld mismatch on J-integrals and Q-values for semi-elliptical surface flaws. Engineering Fracture Mechanics, 64, (4), 433-458. (doi:10.1016/S0013-7944(99)00091-0)

Boothman, D.P., Lee, M.M.K., Luxmoore, A.R. and Sumpter, J.G.D. (1998) J-estimation for semi-elliptical surface cracks in wide plates under direct tension. Fatigue & Fracture of Engineering Materials & Structures, 21, (3), 333-346. (doi:10.1046/j.1460-2695.1998.00478.x)

Boppana, V.B.L. and Gajjar, J.S.B (2010) Global flow instability in a lid-driven cavity. International Journal for Numerical Methods in Fluids, 62, (8), 827-853. (doi:10.1002/fld.2040)

Boppana, V.B.L., Xie, Z.T. and Castro, I.P. (2010) Large-Eddy Simulation of Dispersion from Surface Sources in Arrays of Obstacles. Boundary-Layer Meteorology, 135, (3)(doi:10.1007/s10546-010-9489-9)

Bordignon, G., Fischbacher, T., Franchin, M., Zimmermann, J.P., Zhukov, A.A., Metlushko, V.V., de Groot, P.A.J. and Fangohr, H. (2007) Analysis of magnetoresistance in arrays of connected nano-rings. IEEE Transactions on Magnetics, 43, (6), 2881-2883. (doi:10.1109/TMAG.2007.892597)

Bordignon, Giuliano, Fischbacher, Thomas, Franchin, Matteo, Zimmermann, Jurgen P., de Groot, Peter A.J. and Fangohr, Hans (2008) Numerical studies of demagnetizing effects in triangular ring arrays. Journal of Applied Physics, 103, (7), 07D932-[3pp]. (doi:10.1063/1.2837029)

Borja, R and Banks, C. J. (1996) Evaluation of instability and performance of an upflow anaerobic sludge blanket (USAB) reactor treating high-strength ice cream wastewater. Biotechnology and Applied Biochemistry, 23, (1), 55-61.

Borja, R., Rincon, B., Raposo, F., Sánchez, E. and Martin, A. (2004) Assessment of kinetic parameters for the mesophilic anaerobic biodegradation of two-phase olive pomace. International Biodeterioration & Biodegradation, 53, (2), 71-78. (doi:10.1016/j.ibiod.2003.10.002)

Borja, R., Rincón, B., Raposo, F., Domínguez, J.R., Millán, F. and Martín, A. (2004) Mesophilic anaerobic digestion in a fluidised-bed reactor of wastewater from the production of protein isolates from chickpea flour. Process Biochemistry, 39, (12), 1913-1921. (doi:10.1016/j.procbio.2003.09.022)

Borja, Rafael, Banks, Charles J. and Sanchez, Enrique (1996) Anaerobic treatment of palm oil mill effluent in a two stage up-flow anaerobic sludge blanket (UASB) system. Journal of Biotechnology, 45, (2), 125-135. (doi:10.1016/0168-1656(95)00154-9)

Borja, Rafael, Banks, Charles J. and Wang, Zhengjian (1995) Kinetic evaluation of an anaerobic fluidised bed reactor treating slaughterhouse wastewater. Bioresource Technology, 52, (2), 163-167. (doi:10.1016/0960-8524(95)00019-B)

Borja-Padilla, R. and Banks, C.J. (1993) Thermophilic semi-continuous anaerobic treatment of palm oil mill effluent. Biotechnology Letters, 15, (7), 761-766. (doi:10.1007/BF01080152)

Borthwick, A.G.L., Chaplin, J. R. and Ali, K.H.M. (1988) Discrete vortex model of jet-forced flow in circular reservoir. Journal of Hydraulic Engineering, 114, (3),