Items where Subject is "T Technology > TH Building construction"
|Up a level|
Gaba, A.R., Simpson, B., Beadman, D.R. and Powrie, W. (2003) Embedded retaining walls: guidance for economic design. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 156, (1), 13-15. (doi:10.1680/geng.188.8.131.52294).
Al Abadi, Haider A., Lam, Nelson T.K., Gad, Emad F. and Chandler, Adrian M. (2004) Earthquake floor spectra for unrestrained building components. International Journal of Structural Stability and Dynamics, 4, (3), 361-377. (doi:10.1142/S0219455404001276).
Andre Berhault, Jean-Paul (1975) Wind noise in buildings. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 216pp.
Ashleigh, M.J. (2000) Guide to project Team Partnering, London, England, Construction Industry Council
Bahaj, A.S. (2002) Implementation of the first building integrated photovoltaic cladding on the south coast of the United Kingdom. Renewable Energy, 26, (4), 509-519. (doi:10.1016/S0960-1481(01)00161-6).
Bahaj, A.S., Braid, R.M. and James, P.A.B. (2003) The importance of sensors in the determination of BIPV parameters and installation energy yield. In, Proceedings of 3rd World Conference on Photovoltaic Energy Conversion 2003. 3rd World Conference on Photovoltaic Energy Conversion (WPEC3) , IEEE, 2046-2049. (doi:10.1109/WCPEC.2003.1306350).
Bahaj, A.S. and Foote, J.S. (1994) Photovoltaic cladding: a design approach for panels and curtain walling PV cladding for existing buildings. In, 12th European Photovoltaic Solar Energy Conference, Amsterdam, NL, 11 - 15 Apr 1994.
Bahaj, A.S., Gann, D.M., Clements-Croome, D.J. and Jones, K. (2003) Improving the sustainability of existing buildings. In, International Conference on Construction in the 21st Century (CITC-II), Hon Kong, China, 10 - 12 Dec 2003. , 666-671.
Bahaj, A.S. and James, P.A.B. (2003) Comfort and energy efficiency in the modern office. Public Service Review, Transport, Local Government and the Regions, (Winter 2003), 245-247.
Bahaj, A.S. and James, P.A.B. (2004) EU wide field results of holographic optical elements used for solar control in buildings. In, Proceedings of the 8th World Renewable Energy Congress (WREC VIII), Denver, USA, 29 Aug - 03 Sep 2004. Elsevier Science3000pp.
Bahaj, A.S., James, P.A.B., McBride, J. and Mucci, P.E.R. (2000) Electrical connector contact resistance behaviour within a PV shingle roof. In, Conference Record of the Twenty-Eighth IEEE Photovoltaic Specialists Conference, 2000. Twenty-Eighth IEEE Photovoltaic Specialists Conference USA, Institute of Electrical and Electronics Engineers, 1521-1524. (doi:10.1109/PVSC.2000.916184).
Bahaj, A.S., James, P.A.B. and McBride, J.W. (2001) Accelerated lifetime testing of photovoltaic connectors: implications to built environment applications. In, Proceedings of the 17th European Solar Energy Conference held in Munich, Germany, 22-26 October 2001 [3-volume book set and CD-ROM]. Seventeenth European Solar Energy Conference Munich, Germany; Florence, Italy, WIP-Munich and ETA-Florence, 630-633.
Bahaj, A.S., James, P.A.B. and Mueller, H.F.O. (2004) The potential of lightguiding holographic optical elements for solar control: a case study of a university office building. In, CIB World Building Conference (CIB2004), Toronto, Canada, 02 - 07 May 2004.
Bahaj, AbuBakr S. (2003) Photovoltaic roofing: issues of design and integration into buildings. Renewable Energy, 28, (14), 2195-2204. (doi:10.1016/S0960-1481(03)00104-6).
Bahaj, AbuBakr S., James, Patrick A.B. and Jentsch, Mark F. (2008) Potential of emerging glazing technologies for highly glazed buildings in hot arid climates. Energy and Buildings, 40, (5), 720-731. (doi:10.1016/j.enbuild.2007.05.006).
Baines, Neil Christie (1983) An investigation of the factors which control non-diffuse sound fields in rooms. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 386pp.
Barron, Michael F.E. (1974) The effect of early reflections on subjective acoustical quality in concert halls. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 282pp.
Bica, A.V.D and Clayton, C.R.I. (1993) The preliminary design of free embedded cantilever walls in granular soil. In, Clayton, C.R.I. (ed.) Retaining structures. Proceedings of the conference retaining structures. London, GB, New York, US, Thomas Telford, American Society of Civil Engineers , 731-740.
Bica, A.V.D., Clayton, C.R.I., Symons, I.F., Mair, R.J., Powrie, W., Simpson, B. and Gunn, M.J. (1991) Discussion. Limit equilibrium design methods for free embedded cantilever walls in granular materials. Institution of Civil Engineers Proceedings, 90, (1), 209-229. (doi:10.1680/iicep.1991.13049).
Bloodworth, A.G., Houlsby, G.T., Burd, H.J. and Augarde, C.E. (2001) Three-dimensional modelling of the interaction between buildings and tunnelling operations. In, Proceedings of the International Conference on the response of buildings to excavation-induced ground movements, London, United Kingdom, 17 - 18 Jul 2001. 10pp.
Bowness, D. and Lee, M. (1996) Remaining fatigue life of cracked tubular joints. In, Farkas, József and Jármai, Károly (eds.) Tubular structures VII: proceedings Seventh International Symposium on Tubular Structures, Miskolc, Hungary, 28-30 August 1996. London, GB, Taylor & Francis, 263-270.
Bowness, D. and Lee, M.M.K. (1994) Crack curvature under the weld toe in a tubular joint: a tree-dimensional numerical investigation. In, Proceedings of the Fourth (1994) International Offshore and Polar Engineering Conference, Osaka, Japan, April 10-15, 1994. Cupertino, US, International Society of Offshore and Polar Engineers, 664-669.
Braubach, Matthias and Power, Andrew (2011) Housing conditions and risk: reporting on a European study of housing quality and risk of accidents for older people. Journal of Housing for the Elderly, 25, (3), 288-305.
Brown, D.C. (2000) Changing skills needs in the construction industry. In, Barlow, J. and Venables, T. (eds.) Housing and Construction: identifying missing research needs and opportunities. London, GB, Construction Research and Innovation Strategy Panel. (CRISP Commission, 00/01).
Brown, D.C. and Ashleigh, M.J. (2002) A guide to project team partnering, Construction Industry Council
Brown, D.C. and Riley, M.J. (1997) Partnership working using traditional forms of contract. In, Mouchel Centenary Conference on innovation in Civil and Structural Engineering, Cambridge, GB, 19 - 21 Aug 1997.
Byfield, M. P. (2008) Crumple zone design for buildings. In, COST Action TU0601: Robustness of Structures, Zurich, Switzerland, 04 - 05 Feb 2008.
Byfield, M.P. (2004) Design of steel framed buildings at risk from terrorist attack. The Structural Engineer, 82, (22), 31-38.
Byfield, M.P. (2004) Design of steel framed buildings at risk from terrorist attack. The Structural Engineer, 82, (22), 31-38.
Byfield, M.P. (2005) Prevention of progressive collapses due to terrorist attacks. In, Proceedings of 3rd International Conference on Forensic Engineering: Diagnosing Failures and Solving Problems. 3rd International Conference on Forensic Engineering London, UK, Taylor and Francis, 233-240.
Byfield, M.P. (2005) Chapter 37. A capacity approach to the design of buildings to resist terrorist attack. In, Koukkari, Heli, Braganvba, Luis, Trumpf, Heiko, de Matteis, Gianfranco, Mazzolani, Federico, Schaur, Christian, Jaspart, Jean-Pierre and Huber, Gerald (eds.) Improvement of Buildings' Structural Quality by New Technologies. Proceedings of the Final Conference of COST Action C12, 20-22 January 2005, Innsbruck, Austria. London, GB, Taylor & Francis, 333-340. (doi:10.1201/9780203970843.sec6).
Byfield, M.P. (2007) Protective design for RC framed structures against blast loading through event control with a case study of the Murrah Buildings. In, Concrete Communication Symposium, Sheffield, UK, 09 - 10 Sep 2007.
Byfield, M.P., De Matteis, G. and Dinu, F. (2007) Robust design of steel framed buildings against extreme loading. In, COST Action C26: Urban Habitat Constructions under Catastrophic Events, Prague, Czech Republic, 30 - 31 Mar 2007.
Byfield, M.P., Dhanalakshmi, M. and Goyder, H.G.D. (2004) Modelling of unpropped semi-continuous composite beams. Journal of Constructional Steel Research, 60, 1353-1367. (doi:10.1016/j.jcsr.2003.12.004).
Byfield, M.P. and Paramasivam, P. (2007) Feasibility of catenary action for the prevention of disproportionate collapse in steel framed buildings. In, Beale, R.G. (ed.) Steel and Aluminium Structures, ICSAS'07: Proceedings of the Sixth International Conference on Steel and Aluminium Structures. Sixth International Conference on Steel and Aluminium Structures Oxford, UK, Oxford Brookes University.
Byfield, M.P. and Paramasivam, S. (2011) The Murrah building collapse: a reassessment of the transfer girder. Journal of Performance of Constructed Facilities (doi:10.1061/(ASCE)CF.1943-5509.0000227). (In Press).
Cao, J. and Bloodworth, A.G. (2012) Shear behaviour of reinforced concrete pile caps under full-width wall loading. Proceedings of the ICE - Structures and Buildings, 165, (4), 165-177.
Chaplin, J.R. (1997) Hydrodynamic damping of cylinders in still water, in currents and in oscillatory flow. In, International Workshop on Environmental Loading on Offshore Structures, Covilha, Portugal,
Chaplin, J.R. and Hayashi, K. (1989) Lift forces on a rigid vertical cylinder in waves. In, Proceedings of the Eighth International Conference on Offshore Mechanics and Arctic Engineering, The Hague, The Netherlands, March 19-23, 1989. New York, US, American Society of Mechanical Engineers, 279-287.
Chaplin, J.R., Tickell, R.G. and Anastasiou, K. (1982) The non-linear properties of random wave kinematics. In, Third International Conference on the Behavior of Offshore Structures, Boston, US,
Chen, Z., Clements-Croome, D.J, Hong, J., Li, H., Kaluarachchi, Y., Jones, K.G, James, P.A.B., Jentsch, M. and Bahaj, A. S. (2005) A facade casebase for teaching and learning intelligent buildings. In, Proceedings of CISBAT 2005: Renewables in a Changing Climate - Innovation in Building Envelopes and Environmental Systems. CISBAT 2005 , CISBAT, 581-584.
Clark, J. and Richards, D.J. (2005) Measurement of bending moments in concrete. In, Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering. 16th International Conference on Soil Mechanics & Geotechnical Engineering (16ICSMGE) , Mill Press, 1027-1030.
Clayton, C.R.I. (1985) Discussion on 'Behaviour of bridge abutments on chalk' by A.P. Butcher and A. Marsland. In, Prakash, Shamsher (ed.) Fourth International Conference on Case Histories in Geotechnical Engineering, St. Louis, Missouri,. March 9-12, 1998. Rolla, US, University of Missouri-Rolla, 1516.
Clayton, C.R.I. (1991) Discussion on session 4B - Retaining structures. In, Deformation of soils and displacements of structures. Proceedings of the tenth European conference on soil mechanics & foundation engineering, Florence, 26-30 May 1991. London, GB, Taylor & Francis, 1366-1368.
Clayton, C.R.I. (1993) Retaining Structures: Proceedings of the Retaining Structures Conference held at Robinson College, Cambridge, July 1992, London, GB, Thomas Telford, 829pp.
Clayton, C.R.I. (1993) Rapporteur's introduction to session 1 - general principles. In, ." Proceedings of the I.C.E. Conference on Retaining Structures. I.C.E. Conference on Retaining Structures London, GB, Institution of Civil Engineers, 17-23.
Clayton, C.R.I. (2001) Managing geotechnical risk: improving productivity in UK building and construction, Thomas Telford, 80pp. (Institution of Civil Engineers).
Clayton, C.R.I., Bica, A.V.D and Moore, M. (1995) Discussion: A resin impregnation technique for the determination of the density variations in completed specimens of dry cohesionless soil. Géotechnique, 45, (2), 353 -354. (doi:10.1680/geot.19184.108.40.2063).
Clayton, C.R.I., Edwards, A. and Webb, M.J. (1991) Displacements within the London clay during construction. In, Deformation of Soils and Displacements of Structures. Proceedings of the Tenth European Conference on Soil Mechanics and Foundation Engineering, Florence, May 27-30. London, GB, Taylor & Francis, 791-796.
Cossich, N., Shenoi, R.A. and Wilson, P.A. (1998) Flexural characteristics in in-plane adehesively bonded sandwich structures. In, 4th International Conference on Sandwich Joints, Stockholm, Sweden, 09 - 11 Jun 1998. 14pp, 493-504.
Deng, Jun and Lee, Marcus M.K. (2007) Behaviour under static loading of metallic beams reinforced with a bonded CFRP plate. Composite Structures, 78, (2), 232-242. (doi:10.1016/j.compstruct.2005.09.004).
Dexter, E.M., Kirkwood, M.G. and Lee, M. (1994) Effects of overlap on strength of k-joints in CHS tubular members. In, Grundy, Paul (ed.) Tubular Structures VI: Sixth International Symposium on Tubular Structures, Melbourne, Australia, 14-16 December 1994. London, GB, Taylor & Francis, 581-588.
Dhanalakshmi, M., Byfield, M.P. and Couchman, G.H. (2002) Composite connections at perimeter locations in unpropped composite floors. In, Advances in Steel Structures (ICASS 02), Hong Kong, China, 09 - 11 Dec 2002.
Eslava, Marcela, Haltiwanger, John, Kugler, Adriana and Kugler, Maurice (2004) The effects of structural reforms on productivity and profitability enhancing reallocation: evidence from Colombia. Journal of Development Economics, 75, (2), 333-371. (doi:10.1016/j.jdeveco.2004.06.002).
Evans, G.N., Bailey, A., Reed, M., Naim, M.M., Brown, D., Towill, D.R. and Riley, M. (1997) Organising for improved construction interfaces. Innovation in Civil and Construction Engineering, 49, 207-212. (doi:10.4203/ccp.49.6.5).
Farina, Angelo, Capra, Andrea, Conti, Lorenzo, Mantignon, Paolo and Fazi, Filippo M. (2007) Measuring spatial impulse responses in concert halls and opera houses employing a spherical microphone array. In, 19th International Congress on Acoustics, Madrid, ES, 02 - 07 Sep 2007. 6pp.
Franke, David, Lam, Nelson, Gad, Emad and Chandler, Adrian (2005) Seismically induced overturning of objects and filtering effects of buildings. Journal of Seismology and Earthquake Engineering, 7, (2), 95-108.
Gaba, A.R., Simpson, B., Powrie, W. and Beadman, D.R. (2003) Embedded retaining walls: guidance for economic design, London, GB, Construction Industry Research and Information Association, 450pp. (CIRIA Report, C580).
Gourvenec, S., Powrie, W. and De Moor, E.K. (2002) Three-dimensional effects in the construction of a long retaining wall. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 155, (3), 163-173. (doi:10.1680/geng.220.127.116.11682).
Griffin, M.J. (2007) Predicting the feeling of vibration in buildings. Proceedings of the Institute of Acoustics, 29, (2), 15pp.
Grisbrooke, J. (2003) Living with lifts: a study of users' experiences. British Journal of Therapy and Rehabilitation, 10, (2), 76 - 81.
Gunn, M.J. and Clayton, C.R.I. (1992) Installiation effects and their importance in the design of earth-retaining structures. Géotechnique, 42, (1), 137 -141. (doi:10.1680/geot.1918.104.22.168).
Gunn, M.J., Satkunananthan, A. and Clayton, C.R.I. (1993) Finite element modelling of installation effects. In, Retaining Structures: Proceedings of the Retaining Structures Conference held at Robinson College, Cambridge, July 1992. London, GB, Thomas Telford, 46-55.
Habbab, H., Mellor, B.G. and Syngellakis, S. (2000) Using the instrumented microhardness technique to determine the mechanical properties of welds. In, 6th Post Graduate Conference in Engineering Materials: Oct. 6, 2000. Southampton, GB, Materials Research Group, School of Engineering Sciences, University of Southampton, 19-20. (473).
Hayward, T., Richards, D.J., Cowin, D.J., Vincent, N. and Carder, D. (1998) Benefits of an embedded retaining wall with stabilizing base. In, The Vvlue of geotechnics in construction. London, GB, Institution of Civil Engineers.
Hill, M., McHugh, J. and Turner, J.D. (2000) Cross-sectional modes in the impact-echo assessment of concrete strucrures. Journal of Structural Engineering, 126, (2), 228-234. (doi:10.1061/(ASCE)0733-9445(2000)126:2(228)).
Howarth, H.V.C. and Griffin, M.J. (2008) Development of a social survey questionnaire of reactions to vibration in residential buildings. In, Acoustics'08, Paris, France, 29 Jun - 04 Jul 2008. , 4317-4321.
Hudson, A. P., Beaven, R. P. and Powrie, W. (2004) Testing of whole and shredded scrap tyres for use as landfill engineering drainage material. In, International Conference Sustainable on Waste Management and Recycling: Challenges and Opportunities, London, GB, London, GB, Thomas Telford, 187.
James, P.A.B., Jentsch, M.F. and Bahaj, A.S. (2006) B-space: pre-refurbishment assessment and classification of building facades. In, Proceedings 2nd International Conference of Renewable Energy in Maritime Island Climates (REMIC 2). , REMIC, 221-227.
James, P.A.B., Jentsch, M.F. and Bahaj, A.S. (2006) Window opening and blind usage patterns in a naturally ventilated office building: to what extent does user behaviour compromise potential building performance? In, World Renewable Energy Congress 2006. World Renewable Energy Congress (WREC-IX) Milano, IT, Elsevier Science.
James, P.A.B., Jentsch, M.F., Bahaj, A.S. and Uittenbogaard, J.G.M. (2005) Assessment of building envelope refurbishment options to achieve sustainable energetic performance in a high thermal mass office building. In, Proceedings of the Conference on Sustainable Building South East Asia (SB04SEA),, Kuala-Lumpur, Malaysia, 11 - 13 Apr 2005. Rotterdam, CIB, 522-529.
Jefferis, S.A. (1987) An experimental and theoretical investigation into the behaviour of the bentonite slurries in the pile annuli for the mosque extension at Medinah. Beirut, LB, Dar Al-Handasah Consultants
Jentsch, M. F. and Römhild, T. (2004) Daylighting in buildings - a matter of lighting quality not quantity. In, Proceedings HICs 1st Symposium on Technological Developments of Daylight Applications. HICs 1st Symposium on Technological Developments of Daylight Applications Athens, Greece, NRF Athens, 66-69.
Jentsch, M.F., James, P.A.B. and Bahaj, A.S. (2006) A climatic envelope extension of an office building - perception and reality of the change in environmental conditions. In, Proceedings CIBSE National Conference, London, UK, 21 - 22 Mar 2006.
Jentsch, Mark F., Bahaj, AbuBakr S. and James, Patrick A.B. (2008) Climate change future proofing of buildings—Generation and assessment of building simulation weather files. Energy and Buildings, 40, (12), 2148-2168. (doi:10.1016/j.enbuild.2008.06.005).
Jentsch, Mark Frederick (2009) Viability of naturally ventilated buildings in the UK under predicted future summer climates. University of Southampton, School of Civil Engineering and the Environment, Doctoral Thesis , 232pp.
Jones, C., Létourneaux, F. and Fodiman, P. (2008) Testing a new roughness measurement standard. In, Acoustics'08, Paris, France, 29 Jun - 04 Jul 2008. 6pp, 4317-4321.
Kaluarachchi, Y., Jones, K., James, P.A.B., Jentsch, M.F., Bahaj, A.S., Clements-Croome, D.J. and Gann, D.M. (2005) Building facades: issues of sustainability, maintenance and refurbishment. In, EPSRC SUE Vision into Action Conference Proccedings,, Birmingham, UK, 28 Feb - 02 Mar 2005.
Kantartzi, C. (1999) Installation effects of diaphragm walls in clay. In, Clayton, C.R.I. (ed.) Retaining Structures. London, GB, Thomas Telford, 37-45.
Kesner, Keith, Hill, Martyn, McHugh, John and Turner, John D. (2001) Cross-sectional modes in the impact-echo assessment of concrete structures. Journal of Structural Engineering, 127, (5), 595-597. (doi: 10.1061/(ASCE)0733-9445(2001)127:5(595)).
Lawson, P.M., Byfield, M.P., Popo-Ola, S.O. and Grubb, P.J. (2008) Robustness of light steel frames and modular constructions. Proceedings of the ICE - Structures and Buildings, 161, (1), 3-16. (doi:10.1680/stbu.2008.161.1.3).
Lee, M. (1990) Ultimate stength of perforated steel plates under combined bending and shearing. In, Conference on Structural Engineering and Computation,
Lee, M. (2005) Fatigue behaviour of steel beams boonded with a carbon composite plate under fatigue loading. In, Third International Conference on Composites in Construction, Lyon, FR, 11 - 13 Jul 2005.
Lee, M. and Bowness, D. (1994) Fatigue crack curature under the weld toe in a tubular joint. In, Grundy, P., Holgate, A. and Chino, E. (eds.) Tubular structures VI : proceedings sixth International Symposium on Tubular Structures, Melbourne, Australia, 14-16 December 1994. London, GB, Taylor & Francis, 543-550.
Lee, M. and Bowness, D. (1996) Fatigue assessment of semi-elliptical weld toe cracks in T-butts. In, Chan, S.L. and Teng, J.G. (eds.) Advances in Steel Structures: Proceedings of International Conference on Advances in Steel Structures 11-14 December 1996, Hong Kong. London, GB, Pergamon Press, 1133-1138.
Lee, M. and Bowness, D. (1998) Factors affecting the fracture mechanics assessment of a cracked offshore tubular joint. In, Choo, Y.S. and van der Vegta, G.J. (eds.) Tubular Structures VIII: Proceedings of the Eighth International Symposium, Singapore, 26-28 August 1998. London, GB, Taylor & Francis, 353-359.
Lee, M. and Dexter, E.M. (1994) A parametric study on the out-of-plane bending strength of T/Y-joints. In, Grundy, Paul (ed.) Tubular Structures VI: Sixth International Symposium on Tubular Structures, Melbourne, Australia, 1994. London, GB, Taylor & Francis, 433-440.
Lee, M. and Dexter, E.M. (1998) Effect of overlap on the behaviour of axially loaded CHS K-joints. In, Choo, Y.S. and van der Vegte, G.J. (eds.) Tubular Structures VIII: Proceedings of the Eighth International Symposium, Singapore, 26-28 August 1998. London, GB, Taylor & Francis, 249-258.
Lee, M., Dexter, E.M. and Gazzola, F. (1999) Strength prediction of axially loaded overlap tubular K-joints. In, Ninth International Offshore and Polar Engineering Conference, Brest, FR, 30 May - 04 Jun 1999.
Lee, M., Haswell, J.V. and Dexter, E.M. (1993) A comparative study on out-of-plane moment capacity of tubular T/Y joints. In, Coutie, M.G. and Davies, G. (eds.) Tubular Structures: The 5th International Symposium, Nottingham, United Kingdom, 25-27 August 1993. , Taylor & Francis, 675-682.
Lee, M. and Kamtekar, M. (1987) Stresses in a plate girder with a thin perforated web. In, Dubas, P. and Vandepitte, D. (eds.) ECCS Colloquium on Stability of Plates and Shell Structures, Ghent University, Belgium, 1987. Gent, BE, ECCS, 95-100.
Lee, M. and Llewelyn-Parry, A. (1998) Ultimate strength of ring-stiffened T-joints- a theoretical model. In, Choo, Y.S. and van der Vegta, G.J. (eds.) Tubular Structures VIII: Proceedings of the Eighth International Symposium, Singapore, 26-28 August 1998. London, GB, Taylor & Francis, 147-156.
Lee, M. and Luxmoore, M. (1990) A fracture analysis of undermatched butt welds. In, Conference on Welded Structures, London, GB,
Lee, M. and Luxmoore, M. (1993) Effect of weld metla mismatch on fracture mechanics parameters. In, OMAE 1993 : proceedings of the 12th International Conference on Offshore Mechanics and Arctic Engineering. New York, US, American Society of Mechanical Engineers, 25-33.
Lee, M. and Wilmshurst, S.R. (1995) Static strength of multiplanar KK-joints- a reassessment of the database and estimation equations. In, Salama, M.M., Toyoda, M., Lui, S., Kocak, M., Dos Santos, J.F., Patterson, E.A., Berge, S. and Stacey, A. (eds.) 1995 Proceedings Offshore Mechanics and Arctic Engineering Materials Symposium, June 18-22, 1995, Copenhagen, Denmark. New York, US, American Society of Mechanical Engineers, 181-191.
Lee, M.M.K. and Dexter, E.M. (1998) Ultimate capacity of axially loaded K-joints in CHS. In, Choo, Y.S. and Vegte, G.J. (eds.) Tubular Structures VIII: Proceedings of the Eighth International Symposium, Singapore, 26-28 August 1998. London, GB, Taylor & Francis, 259-268.
Lee, M.M.K. and Morgan, M.R. (1998) Prediction of stress concentration factors in in-plane moment loaded tubular K-joints. In, Tubular Structures VIII: Proceedings of the Eighth International Symposium, Singapore, 26-28 August 1998. London, GB, Taylor & Francis, 305-314.
Leekitwattana, M. (2011) Analysis of an alternative topology for steel-concrete-steel sandwich beams incorporating inclined shear connectors. University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 243pp.
Leekitwattana, M., Boyd, S.W. and Shenoi, R.A. (2010) An alternative design of steel-concrete-steel sandwich beam. In, 9th International Conference on Sandwich Structures (ICSS-9), California, US, 14 - 16 Jun 2010. 10pp.
Legge, N.B. and Bloodworth, A.G. (2001) Surface and subsurface structural response on the City of London cable tunnels project. In, Proceedings of the International Conference on the response of buildings to excavation-induced ground movements, London, United Kingdom, 17 - 18 Jul 2001. 9pp.
Loveridge, F. (2012) The thermal performance of foundation piles used as heat exchangers in ground energy systems. University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 206pp.
Moy, S.S.J. (1984) Ring beam stresses in cooling towers. In, Damjanić, F. (ed.) Proceedings of the International Conference on Computer-Aided Analysis and Design of Concrete Structures. Split, Yugoslavia, 17th-21st September, 1984. Swansea, GB, Pineridge Press.
Moy, S.S.J. (1986) Finite element techniques for the analysis of hyperbolic cooling tower shells. In, Hinton, E. and Owen, D.R.J. (eds.) Computational Modelling of Reinforced Concrete Structures. Swansea, GB, Pineridge Press, 254-281.
Moy, S.S.J. (2000) Carbon fibre composite beam performance versus design. In, Seminar at Institution of Civil Engineers in the use of advanced composites in construction, London, GB, , 1-10.
Moy, S.S.J., El-Shihy, A.M. and Jolly, C.K. (1987) Flexural tests on composite beams with unwelded shear connectors. In, Proceedings IStructE/BRE Seminar on Structural Assessment - Based on Full and Large Scale Testing, Watford, April 1987. London, GB, Butterworths, 90-97.
Moy, S.S.J. and Jolly, C.K. (1987) Instrumentation and monitoring of a factory building. In, IstructE/BRE Seminar on Structural Assessment,
Moy, S.S.J., Jolly, C.K. and El-Shihy, A.M. (1987) Unwelded shear connectors for composite beams. In, Proceedings of the International Conference on Steel and Aluminium Structures Cardiff, July 1987. Oxford, GB, Elsevier Applied Science, 366-375.
Moy, S.S.J., Shenoi, R.A., Padhi, G.S., Feng, Z.N. and Allen, H.G (1998) Progressive damage analysis of GRP panels under extreme transverse pressure loading. In, Thin-Walled Structures: Research and Development. Second International Conference on Thin-Walled Structures Oxford, GB, Elsevier Science, 305-312.
Nethercot, D.A. and Byfield, M. P. (1996) Selection of safety factors for use in steel construction. In, Chan, S.L. and Teng, J.G. (eds.) Advances in Steel Structures ICASS '96: Proceedings of International Conference on Advances in Steel Structures held on 11-14 December 1996 in Hong Kong. London, GB, Pergamon, 35-42.
Nicholls, R.J. (2003) The resilience of coastal megacities to weather related hazards: a review. In, Kreimer, Alcira, Arnold, Margaret and Carlin, Anne (eds.) Building Safer Cities: The Future of Disaster Risk. Washington DC, USA, The World Bank, 111-137. (Disaster Risk Management Series 3).
O'Brien, A.S. (2007) Raising the 133m high triumphal arch at the new Wembley Stadium, risk management via the observational method. In, Cuéllar, V., Dapena, E., Alonso, E., Echave, J.M., Gens, A., de Justo, J.L., Oteo, C., Rodríguez-Ortiz, J.M., Sagaseta, C., Sola, P. and Soriano, A (eds.) Geotechnical Engineering in Urban Environments: Proceedings of the 14th European Conference on Soil Mechanics and Geotechnical Engineering. 14th European Conference on Soil Mechanics and Geotechnical Engineering Rotterdam, The Netherlands, Mill Press, 365-370.
O'Brien, A.S., Carley, S.W., Loveridge, F.A. and Hsu, Y.S. (2007) Innovative use of clay backfill at the new Wembley Stadium. In, Proceedings of the Sustainable Construction Materials and Technologies Conference. Sustainable Construction Materials and Technologies Conference Coventry, UK, Coventry University.
O'Brien, A.S. and Hardy, S. (2006) Non-linear analysis of large pile groups for the new Wembley Stadium. In, Proceedings-DFI/EFFC 10th International Conference on Piling and Deep Foundations. DFI/EFFC 10th International Conference on Piling and Deep Foundations Hawthorne, USA, Deep Foundations Institute, 303-310.
O'Brien, A.S., Hardy, S., Farooq, I. and Ellis, E.A. (2005) Foundation engineering for the UK’s new national stadium at Wembley. In, Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering. The Sixteenth International Conference on Soil Mechanics and Geotechnical Engineering (16ICSMGE) Rotterdam, The Netherlands, Mill Press, 1533-1536.
Powrie, W. and Li, E.S.F. (1991) Analysis of in situ retaining walls propped at formation level. ICE Proceedings, 91, (4), 853-873. (doi:10.1680/iicep.1991.17493).
Rattley, M.J., Richards, D.J. and Lehane, B.M. (2008) Uplift performance of transmission tower foundations embedded in clay. Journal of Geotechnical & Geoenvironmental Engineering, 134, (4), 531-540. (doi:10.1061/(ASCE)1090-0241(2008)134:4(531)).
Richards, D.J., Powrie, W. and Kantartzi, C., (1994) Modelling diaphragm wall installation and excavation processes. In, Leung, C.F., Lee, F.H. and Tan, T.S. (eds.) Centrifuge 94 : proceedings of the International Conference Centrifuge 1994, Singapore, 31 August - 2 September 1994. Rotterdam, NL, Balkema, 655-661.
Riley, M.J., Ashleigh, M.J. and Brown, D.C. (2000) Trust in technology and the future of the construction industry. International Journal Construction Information Technology, 8, (2), 39-50.
Riley, M.J., Brown, D. C. and Killander, K.A. (1999) Obstacles to co-operative working: lessons from construction. Journal of Co-operative Studies, 31, 43-64.
Riley, M.J. and Brown, D.C. (2001) Case study o the application of BPR in an SME contractor. Knowledge and Process Management., 8, (1), 17-28. (doi:10.1002/kpm.98).
Riley, M.J. and Brown, D.C. (2001) Comparison of cultures in construction and manufacturing industries. Journal of Management in Engineering, 17, (3), 149-158. (doi:10.1061/(ASCE)0742-597X(2001)17:3(149)).
Roberts, T.O.L. and Jefferis, S.A. (1992) Chemical and microbiological effects on construction dewatering systems. In, Ground Chemistry Implications for Construction: Proceedings of the International Conference on the Implications of Ground Chemistry and Microbiology for Construction, University of Bristol, UK, 1992. Rotterdam, NL, Balkema, 607-616.
Shenoi, R.A., Allen, H.G, Moy, S.S.J. and Feng, Z.N. (1995) The behaviour of single-skin FRP plate structures under extreme lateral pressure loading. In, Kruppa, C.F.L. (ed.) FAST '95, 3rd International Conference on Fast Sea Transportation, 25-27 Sept 1995; Lubeck-Travemunde, Germany. , Germany, Schiffbautechnische Gesellschaft, 341-353.
Smedema, Lambert and Rycroft, David (1983) Land drainage: planning and design of agricultural drainage schemes, London, GB, Batsford
Smit, Gerrit (2010) The behaviour of modern flexible framed structures undergoing differential settlement. University of Southampton, School of Engineering and the Environment, Doctoral Thesis .
Smith, P.P., Byfield, M.P. and Goode, D.J. (2010) Building robustness research during World War II. Journal of Performance of Constructed Facilities, 24, (9), 529-535. (doi:10.1061/(ASCE)CF.1943-5509.0000115).
Stoker, Gerry, Smith, Graham, Maloney, William and Young, Stephen (2004) Voluntary organisations and the generation of social capital. In, Boddy, Martin and Parkinson, Michael (eds.) City Matters: Competitiveness, Cohesion and Urban Governance. Bristol, UK, Policy Press, 389-407.
Symons, I.F., Andrawes, K.Z., Wood, L.A., Collins, Mr, Murray, R.T., Clayton, C.R.I., Gaynor, M., Simpson, B., Mawditt, J.M. and Jones, C. (1989) Discussion on 'conventional retaining walls: pilot and full scale studies' by Symons and Murray. ICE Proceedings, 86, (5), 978-980. (doi:10.1680/iicep.1989.3169).
Tan, Mingyi, Xiong, Ye Ping and Xing, Jing Tang (2009) Dynamic response analysis of an onshore LNG-storage tank interaction system sub-ject to impact or earthquake loads. In, Proceedings of the Sixteenth International Congress on Sound and Vibration - ICSV16. 16th International Congress on Sound and Vibration - ICSV16 Krakow, Poland, International Institute of Acoustics and Vibration, (IIAV), 1-8. (ICSV16-539).
Teli, Despoina, James, P.A.B. and Jentsch, Mark F. (2013) Thermal comfort in naturally ventilated primary school classrooms. [in special issue: Adaptive Comfort in an Unpredictable World] Building Research & Information, 41, (3), 301-316. (doi:10.1080/09613218.2013.773493).
Ward, S.C., Chapman, C.B. and Curtis, B. (1991) On the allocation of risk in construction projects. Southampton, UK, University of Southampton (Discussion Papers in Accounting and Management Science, (91-8) ).
Watts, C., Jentsch, M.F. and James, P.A.B. (2011) Evaluation of domestic Energy Performance Certificates in use. Building Services Engineering Research and Technology, 32, (4), 361-376. (doi:10.1177/0143624411404486). (In Press).
Weitzenbock, J.R., Shenoi, R.A. and Wilson, P.A. (1999) Measurement of the principal permeability with the channel flow experiment. Polymer Composites, 20, (2), 321-335. (doi:10.1002/pc.10359).
Wilmshurst, S.R. and Lee, M.M.K. (1993) Ultimate capacity of axially loaded multiplaner double k-Joints in circular hollow sections. In, Tubular Structures: The 5th International Symposium, Nottingham, United Kingdom, 25-27 August 1993. London, GB, Taylor & Francis, 712-719.
Xing, J.T. and Xiong, Y.P. (2008) Numerical simulations of a building-acoustic volume interaction system excited by multiple human footfall impacts. In, ASME Pressure Vessels and Piping Conference-PVP2008. New York City, US, ASME, PVP61813-[10pp].
Xing, J.T., Xiong, Y.P. and Tan, M. (2007) The dynamic analysis of a building structure - acoustic volume interaction system excited by human footfall impacts. Fourteenth International Congress on Sound and Vibration (ICSV14), Cairns, Australia, 09 - 12 Jul 2007. Cairns, Australia, Fourteenth International Congress on Sound and Vibration8pp, 1-8.
Xing, Jing Tang and Xiong, Ye Ping (2008) Mixed finite element method and applications to dynamic analysis of fluid-structure interaction systems subject to earthquake, explosion and impact loads. In, Proceedings of ISMA2008 International Conference on Noise and Vibration Engineering. 23rd ISMA Conference Leuven, Belgium, Katholieke Universitert Leuven, 4055-4070. (ID562).
Zilletti, Michele, Elliott, Stephen J. and Rustighi, Emiliano (2012) Optimisation of dynamic vibration absorbers to minimise kinetic energy and maximise internal power dissipation. Journal of Sound and Vibration, 331, (18), 4093-4100. (doi:10.1016/j.jsv.2012.04.023).