Items where Subject is "T Technology > TS Manufactures"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
[tool] Add To Shelf...
Number of items at this level: 225.

Vaezi, Mohammad (Patent Holder) (2009) Fabrication of accurate unborn baby RP model using a novel image processing technique.

Buller, Henry and Roe, Emma J. (eds.) (2011) Certifying quality. Negotiating and integrating animal welfare into food assurance, Cardiff, GB, Cardiff University, 48pp. (Welfare Quality Reports, 15).

Aglietti, G.S., Markvart, T., Tatnall, A.R. and Walker, S.J. (2008) Solar power generation using high altitude platforms feasibility and viability. Progress in Photovoltaics: Research and Applications, 16, (4), 349-359. (doi:10.1002/pip.815).

Ahkioon, S., Bulgak, A.A. and Bektas, T. (2009) Cellular manufacturing systems design with routing flexibility, machine procurement, production planning and dynamic system reconfiguration. International Journal of Production Research, 47, (6), 1573-1600. (doi:10.1080/00207540701581809).

Ahkioon, S., Bulgak, A.A. and Bektas, T. (2009) A comprehensive mathematical modeling approach to the design of cellular manufacturing systems integrating production planning and system reconfiguration. European Journal of Operational Research, 192, 414-428. (doi:10.1016/j.ejor.2007.09.023).

Al-Mosawi, M.K., March, S.A., Beduz, C., Ballarino,, A. and Yang, Y. (2007) Full cryogenic test of 600 A HTS hybrid current leads for the LHC. IEEE Transactions on Applied Superconductivity, 17, (2, part 2), 2236-2239. (doi:10.1109/TASC.2007.899696).

Alkhalil, Feras (2013) Development of novel fabrication technology for SOI single electron transfer devices. University of Southampton, Physical Sciences and Engineering, Doctoral Thesis , 154pp.

Alkhalil, Feras M., Perez-Barraza, Julia I., Husain, Muhammad K., Lin, Yun P., Lambert, Nick, Chong, Harold M.H., Tsuchiya, Yoshishige, Williams, David A., Ferguson, Andrew J., Saito, Shinichi and Mizuta, Hiroshi (2013) Realization of Al tri-gate single electron turnstile co-integrated with a close proximity electrometer SET. Microelectronic Engineering, 111, 64-67. (doi:10.1016/j.mee.2013.02.007).

Andritsch, Thomas, Fabiani, Davide and Ramirez-Vazquez, Isaias (2013) Nanodielectrics: examples of preparation and microstructure. IEEE Electrical Insulation Magazine, 1-11. (In Press).

Basri, B. and Griffin, M.J. (2013) Predicting discomfort from whole-body vertical vibration when sitting with an inclined backrest. Applied Ergonomics, 44, (3), 423-434. (http://dx.doi.org/10.1016/j.apergo.2012.10.006).

Bennell, Julia A., Dowsland, Kathryn A. and Dowsland, William B. (2001) The irregular cutting-stock problem: a new procedure for deriving the no-fit polygon. Computers and Operations Research, 28, (3), 271-287. (doi:10.1016/S0305-0548(00)00021-6).

Brambilla, Gilberto (2007) Next-generation fibers: optical fibres go nano. Laser Focus World, 43, (10), 85-88.

Brambilla, Gilberto, Xu, Fei, Horak, Peter, Jung, Yongmin, Koizumi, Fumihito, Sessions, Neil P., Koukharenko, Elena, Feng, Xian, Murugan, Ganapathy S., Wilkinson, James S. and Richardson, David J. (2009) Optical fiber nanowires and microwires: fabrication and applications. Advances in Optics and Photonics, 1, (1), 107-161. (doi:10.1364/AOP.1.000107).

Brooks, M. M. (2003) Forgotten fibres: fibres from unusual sources. In, Crossroads of Fashion and Textiles ICOM Costume Committee, Krakow, Poland, 28 Sep - 03 Oct 2003. ICOM Costume Committee. (Submitted).

Brooks, M.M. (2004) Madame cow and the milk-maid coat: fashion and fibres made from milk. In, American Costume Society Symposium: 20th century design, fashion, interiors, architecture and the performing arts 2004, Houston, Texas, USA, 23 - 29 May 2004.

Brooks, M.M. (2005) Soya bean fibres: past, present and future. In, Blackburn, R.S. (ed.) Biodegradable and Sustainable Fibres. Cambridge, UK, Woodhead Publishing, 398-440. (Woodhead Publishing in Textiles).

Brooks, M.M., Dokos, L. and Korenburg, C. (2004) Smart and techno fabrics: the effect of a museum environment on their mechanical properties. In, International Community for Composites Engineering (ICCE) Eleventh International Conference on Composite / Nano Engineering, Hilton Head, South Carolina, USA, 08 - 14 Aug 2004.

Brooks, M.M. and Rose, M. (2006) Contextualising textiles : using documentary evidence to retrieve evidence for regenerated protein fibres. In, Townsend, J (ed.) The Object in Context: Crossing Conservation Boundaries. The 21st IIC International Congress: the Object in Context: Crossing Conservation Boundaries London, UK, International Institute for Conservation, 1-7.

Brooks, Mary (2007) Fibre structures of regenerated protein fibres. In, Eichhorn, Stephen, Jaffe, Mike and Kikutani, Takeshi (eds.) Handbook of Fibre Structure. Cambridge, UK, Woodhead. (Submitted).

Brooks, Mary M. (2006) Forgotten fibres : issues in the collecting and conservation of regenerated protein fibres. In, Rogerson, C. and Garside, P. (eds.) The Future of the Twentieth Century: Collecting, Interpreting and Conserving Modern Materials. AHRC Research Centre for Textile Conservation and Textile Studies: The future of the twentieth century - collecting, interpreting and conserving modern materials London, UK, Archetype, 33-40.

Brown, Steve (1996) Strategic manufacturing for competitive advantage: transforming operations from shop floor to strategy, Hemel Hempstead, UK, Prentice Hall, 304pp.

Bru, Christophe, Scanlan, James and Hale, Peter (2004) Visualisation of cost information. International Journal of Agile Manufacturing, 7, (1), 53-59.

Buikis, A., Fitt, A.D. and Ulanova, N. (1997) A model of oil burnout from a glass fabric. In, Brøns, Morten, Bendsøe, Martin Philip and Sørensen, Mads Peter (eds.) Proceedings of the 9th conference of the European Consortium for Mathematics in Industry, ECMI 96. Progress in Industrial Mathematics at ECMI 96 Stuttgart, Germany, B.G. Teubner, 150-157.

Bulcourt, Nicholas, Booth, Jean-Paul, Hudson, Eric A., Luque, Jorge, Mok, Daniel K.W., Lee, Edmond P., Chau, Foo-Tim and Dyke, John M. (2004) Use of the ultraviolet absorption spectrum of CF2 to determine the spatially resolved absolute CF2 density, rotational temperature, and vibrational distribution in a plasma etching reactor. Journal of Chemical Physics, 120, (20), 9499-9508. (doi:10.1063/1.1695313).

Bull, D.J., Helfen, L., Sinclair, I. and Spearing, S.M. (2012) Multi-scale 3D imaging of carbon fibre laminate impact and compression after impact damage using computed tomography and laminography. At 15th European Conference on Composite Materials, Venice, IT, 24 - 28 Jun 2012. European Society for Composite Materials8pp.

Bull, D.J., Helfen, L., Sinclair, I., Spearing, S.M. and Baumbach, T. (2013) A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage. Composites Science and Technology, 75, 55-61. (doi:10.1016/j.compscitech.2012.12.006).

Bull, D.J., Scott, A.E., Spearing, S.M. and Sinclair, I. (2014) The influence of toughening-particles in CFRPs on low velocity impact damage resistance performance. Composites Part A: Applied Science and Manufacturing, 58, 47-55. (doi:10.1016/j.compositesa.2013.11.014).

Bull, D.J., Sinclair, I., Spearing, S.M. and Helfen, L. (2011) Composite laminate impact damage assessment by high resolution 3D X-ray tomography and laminography. At ICCM 18: 18th International Conference on Composite Materials, Jeju Island, KR, 21 - 26 Aug 2011. 6pp.

Bull, D.J., Spearing, S.M. and Sinclair, I. (2013) Quasi-static indentation and compression after impact damage growth monitoring using microfocus X-ray computed tomography. At ICCM 19: The 19th International Conference on Composite Materials, Montreal, CA, 28 Jul - 02 Aug 2013. Curran Associates9pp.

Bull, D.J., Spearing, S.M., Sinclair, I. and Helfen, L. (2013) Three-dimensional assessment of low velocity impact damage in particle toughened composite laminates using micro-focus X-ray computed tomography and synchrotron radiation laminography. Composites Part A: Applied Science and Manufacturing, 52, 62-69. (doi:10.1016/j.compositesa.2013.05.003).

Burman, B.L. and Miller, L.E. (2004) Setting the scene: plenary session (introduction to conference). In, Textile Cultures: Spain and England since 1500. Centre for the History of Textile and Dress and the Textile Conservation Centre, Winchester School of Art, UK, 22 - 23 Jul 2004. (Submitted).

Byfield, M.P. and Crawford, R.J. (2003) Oblique bending in u-section steel sheet piles. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 156, (3), 255-261. (doi:10.1680/stbu.156.3.255.37864).

Castiglionesi, fabio and Ornaghi, Carmine (2011) On the determinants of total factor productitvity growth: evidence from Spanish manufacturing firms. Macroeconomic Dynamics, 1-30. (doi:10.1017/S1365100511000332).

Chambers, A.R., Earl, J.S., Squires, C.A. and Suhot, M.A. (2006) The effect of voids on the flexural fatigue performance of unidirectional carbon fibre composites developed for wind turbine applications. International Journal of Fatigue, 28, (10), 1398-1396. (doi:10.1016/j.ijfatigue.2006.02.033).

Chapman, S.J., Fitt, A.D., Ockendon, H. and Pulos, G.C. (1999) Injection moulding of key blanks with Zinalco. Aportaciones Matematicas, 23, 1-11.

Chapman, S.J., Fitt, A.D. and Please, C.P. (1997) Extrusion of power-law shear thinning fluids with small exponent. International Journal of Non-Linear Mechanics, 32, (1), 187-199. (doi:10.1016/S0020-7462(96)00042-X).

Chauraya, Alford, Whittow, Wulliam, Vardaxoglou, J. Yiannis, Li, Yi, Torah, Russel, Yang, Kai, Beeby, Steve and Tudor, John (2013) Inkjet printed dipole antennas on textiles for wearable communications. IET Microwaves Antennas & Propagation, 7, (9), 760-767. (doi:10.1049/iet-map.2013.0076 ).

Cheung, J.M.W., Scanlan, J.P. and Wiseall, S.S. (2009) An aerospace component cost modelling study for value driven design. In, CIRP IPS2 Conference 2009: Industrial Product-Service Systems, Cranfield, UK, 01 - 02 Apr 2009. 5pp.

Cheung, Julie, Scanlan, James and Wiseall, Steve (2008) Value driven design: an initial study applied to novel aerospace components in Rolls-Royce plc. In, Curran, Richard, Chou, Shuo-Yan and Trappey, Amy (eds.) Collaborative Product and Service Life Cycle Management for a Sustainable World: Proceedings of the 15th ISPE International Conference on Concurrent Engineering (CE2008). 15th ISPE International Conference on Concurrent Engineering 2008 (CE2008) London, UK, Springer, 241-248. (Advanced Concurrent Engineering Part 6). (doi:10.1007/978-1-84800-972-1_23).

Cheung, Julie, Scanlan, Jim and Wiseall, Steve (2009) Towards a framework for value-driven design in civil aerospace systems: a case study. CIRP Journal of Manufacturing Science and Technology (CIRPJ-D-09-00075). (Submitted).

Ching, Wai Ki (1997) Circulant preconditioners for failure prone manufacturing systems. Linear Algebra and its Applications, 266, 161-180. (doi:10.1016/S0024-3795(97)00001-3).

Ching, Wai Ki (1997) Markov-modulated poisson processes for multi-location inventory problems. International Journal of Production Economics, 53, (2), 217-223. (doi:10.1016/S0925-5273(97)00114-X).

Ching, Wai Ki (1998) Iterative methods for manufacturing systems of two stations in tandem. Applied Mathematics Letters, 11, (1), 7-12. (doi:10.1016/S0893-9659(97)00124-9).

Ching, Wai Ki (1998) An inventory model for manufacturing systems with delivery time guarantees. Computers & Operations Research, 25, (5), 367-377. (doi:10.1016/S0305-0548(97)00077-4).

Ching, Wai Ki (1998) Production scheduling. A production model with delivery time guarantee for manufacturing systems with early setup. Computers & Industrial Engineering, 35, (1-2), 121-124. (doi:10.1016/S0360-8352(98)00035-7).

Ching, Wai Ki (2001) Markovian approximation for manufacturing systems of unreliable machines in tandem. Naval Research Logistics, 48, (1), 65-78. (doi:10.1002/1520-6750(200102)48:1<65::AID-NAV4>3.0.CO;2-5).

Ching, Wai Ki and Zhou, Xun Yu (1996) Matrix methods in production planning of failure prone manufacturing systems. In, Recent Advances in Control and Optimization of Manufacturing Systems. Part 1: Optimal Production Planning. , Springer, 1-29. (Lecture Notes in Control and Information Sciences, 214). (doi:10.1007/BFb0015112).

Chinh, N.Q., Csanádi, T., Gubicza, J., Lendvai, J. and Langdon, T.G. (2012) Possible self-Organized criticality in the Portevin-Le Chatelier effect during decomposition of solid solution alloys. Materials Research Society Communications, 2, 1-4. (doi:10.1557/mrc.2011.25).

Chinh, N.Q., Csanádi, T., Györi, T., Valiev, R.Z., Straumal, B.B., Kawasaki, M. and Langdon, T.G. (2012) Strain rate sensitivity studies in an ultrafine-grained Al-30wt.%Zn alloy using micro- and nano-indentation. Materials Science and Engineering A, 543, 117-120. (http://dx.doi.org/10.1016/j.msea.2012.02.056).

Choi, Y.G., Chung, Seo, Cho, Park, Curry, R.J., Hewak, D. and Payne, D.N. (2003) Fabrication of single mode selenide optical fibre. In, Photonics 2003, Jeju, Korea, 10 - 12 Dec 2003.

Chu, Zengyong, He, Rongan, Zhang, Xiaobin, Jiang, Zheng, Cheng, Haifeng, Wang, Yingde and Li, Xiaodong (2010) Fabrication of porous SiC(y) (core)/C (shell) fibres using a hybrid precursor of polycarbosilane and pitch. Carbon, 48, (7), 2115-2118. (doi:10.1016/j.carbon.2010.01.064).

Cortese, Barbara and Morgan, Hywel (2011) Controlling the wettability of hierarchically structured thermoplastics. Langmuir, 28, (1), 896-904. (doi:10.1021/la203741b).

Crawford, Robert (1968) Textile machine noise. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 514pp.

Crump, Duncan Andrew (2009) Performance analysis of a reduced cost manufacturing process for composite aircraft secondary structure. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 217pp.

Dalton, Paul, Flynn, Lauren and Shoichet, Molly (2002) Manufacture of poly(2-hydroxyethyl-co-methyl methacrylate) hydrogel tubes for use as nerve guidance channels. BIomaterials, 23, (18), 3843-3851. (doi:10.1016/S0142-9612(02)00120-5).

Daniel, M. (2003) Emptiness, technology and the aesthetics of contemporary art. Artist, 232-235.

Dargie, Peter, Sion, Russell, Atkinson, John and White, Neil (1998) An investigation of the effect of poling conditions on the characteristics of screen-printed piezoceramics. Microelectronics International, 15, (2), 6-10. (doi:10.1108/13565369810215564).

Dechakiatkrai, Chonlada, Lynam, Carol, Gilmore, Kerry J., Chen, Jun, Phanichphant, Sukon, Bavykin, Dmitry V., Walsh, Frank C. and Wallace, Gordon G. (2009) Single-walled carbon nanotube/trititanate nanotube composite fibers. Advanced Engineering Materials, 11, (7), B55-B60. (doi:10.1002/adem.200800337).

Dunsmore, W., Pitts, G., Lewis, S.M., Sexton, C.J., Please, C.P. and Carden, P.J. (1997) Developing methodologies for robust mechanical engineering design. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 211, (3), 179-188. (doi:10.1243/0954405971516167).

Earl, J.S. and Shenoi, R.A. (2004) Hygrothermal ageing effects on FRP laminate and structural foam materials. Composites Part A: Applied Science and Manufacturing, 35, (11), 1237-1247. (doi:10.1016/j.compositesa.2004.04.007).

Eden, Colin, Williams, Terry and Ackermann, Fran (1998) Dismantling the learning curve: the role of disruptions on the planning of development projects. International Journal of Project Management, 16, (3), 131-138. (doi:10.1016/S0263-7863(97)00053-7).

El-Beltagy, M.A. and Keane, A.J. (1998) Optimisation for multilevel problems: a comparison of various algorithms. In, Parmee, Ian C. (ed.) Adaptive Computing in Design and Manufacture: the Integration of Evolutionary and Adaptive Computing Technologies with Product/System Design and Realisation. , Springer, 111-120.

Ellis, R.K., Weihua, J. and Warren, L. (1996) The feasibility of an environmental auditing system for chinese manufacturing industry: a systemic approach. In, IEEE International Conference on Systems, Man, and Cybernetics, 1996. USA, Institute of Electrical and Electronics Engineers, 3015-3020. (doi:10.1109/ICSMC.1996.561445).

Eres, M.H., Weidner, D.E. and Schwartz, L.W. (1999) Three-dimensional direct numerical simulation of surface-tension-gradient effects on the leveling of an evaporating multicomponent fluid. Langmuir, 15, (5), 1859-1871. (doi:10.1021/la980414u).

Essletzbichler, Jürgen (2004) The geography of job creation and destruction in the U.S. manufacturing sector, 1967–1997. Annals of the Association of American Geographers, 94, (3), 602-619. (doi:10.1111/j.1467-8306.2004.00416.x).

Evans, Martin-Halfdan, Walker, J.C., Ma, Chao, Wang, L., Wood, R.J.K. and nCATS (2013) A FIB/TEM study of butterfly crack formation and white etching area (WEA) microstructural changes under rolling contact fatigue in 100Cr6 bearing steel. Materials Science and Engineering A, 570, 127-134. (doi:10.1016/j.msea.2013.02.004).

Fader, Mandy, Cottenden, Alan, Getliffe, K., Gage, H., Clarke-O'Neill, S. and Jamieson, K. (2008) Absorbent products for urinary/faecal incontinence: a comparative evaluation of key product designs. Health Technology Assessment, 12, (29) (doi:10.3310/hta12290). (PMID:18547500).

Fadhel, Nawfal, Wills, Gary and Crowder, Richard M. (2013) Approaches to maintaining provenance throughout the additive manufacturing process. In, 2013 World Congress on Internet Security (WorldCIS), London, GB, 09 - 11 Dec 2013. , 82-87. (doi:10.1109/WorldCIS.2013.6751022).

Figueiredo, Roberto B. and Langdon, Terence G. (2013) Heterogeneous flow during high-pressure torsion. Materials Research-ibero-American Journal of Materials , 16, (3), 571-576. (doi:10.1590/S1516-14392013005000036).

Fitt, A.D. and Chapman, S.J. (1996) Study group report: Continuum chemical reactions in the oil industry. Aportaciones Matematicas, 17, 5-10.

Fruhmann, Richard Konrad (2009) Stress and damage assessment in woven composite materials by means of thermoelastic stress analysis. University of Southampton, School of Engineering, Science and Mathematics, Doctoral Thesis , 131pp.

Gac, A., Atkinson, J.K., Zhang, Z. and Sion, R.P. (2002) A comparison of thick-film chemical sensor characteristics in laboratory and on-line industrial process applications. Measurement Science and Technology, 13, 2062-2073. (doi:10.1088/0957-0233/13/12/335).

Garside, P. and Brooks, M.M. (2006) Probing the microstructure of protein and polyamide fibres. In, Garside, P. and Rogerson, C. (eds.) The Future of the Twentieth Century: Collecting, Interpreting and Conserving Modern Materials. AHRC Research Centre for Textile Conservation and Textile Studies: The future of the twentieth century - collecting, interpreting and conserving modern materials London, UK, Archetype, 67-71.

Garside, P. and Wyeth, P. (2002) Characterisation of silk deterioration. In, North American Textile Conservation Conference, Philadelphia, USA and Winterthur, Switzerland, 2002. Philadelphia, USA, NATCC, 55-60.

Garside, P. and Wyeth, P. (2002) Towards informed conservation: characterising the state of deterioration of weighted silk. In, Art 2002: 7th International Conference on Non-destructive Testing and Microanalysis for the Diagnostics and Conservation of the Cultural and Environmental Heritage, Antwerp, Belgium, 02 - 06 Jun 2002.

Gaspar, T., Rodrigues, H., Odedra, S., Costa, M., Metrolho, J.C., Bardill, A. and Prior, S. (2004) Handheld devices as actors in domotic monitoring system. In, 2nd IEEE International Conference on Industrial Informatics, 2004 (INDIN '04), Berlin, DE, 26 Jun 2004. , 547-551. (doi:10.1109/INDIN.2004.1417406).

Gibbs, David, Vaezi, Mohammad, Yang, Shoufeng and Oreffo, Richard O.C. (2014) Hope versus hype: what can additive manufacturing realistically offer trauma and orthopedic surgery? Regenerative Medicine, 9, (4), 535-549. (doi:10.2217/rme.14.20).

Glasspool, W.V. and Atkinson, J.K. (2003) An evaluation of the charateristics of membrane materials suitable for the batch fabrication of dissolved oxygen sensors. Microelectronics International, 20, (2), 32-40. (doi:10.1108/13565360310472185).

Gur, I., Fromer, N.A., Chen, C-P., Kanaras, A.G. and Alivisatos, A.P. (2007) Hybrid solar cells with prescribed nanoscale morphologies based on hyperbranched semiconductor nanocrystals. Nano Letters, 7, (2), 409-414. (doi:10.1021/nl062660t).

Hewak, Dan (2004) Fabrication of optical fiber. In, Guenther, Bob, Steel, Duncan and Bayvel, Leopold (eds.) Encyclopedia of Modern Optics. Oxford, UK, Academic Press, 440-445.

Hill, M., Jung, M. and Mcbride, J.W. (2002) Separation of form from orientation in 3D measurements of aspheric surfaces with no datum. International Journal of Machine Tools & Manufacture, 42, (4), 457-66. (doi:10.1016/S0890-6955(01)00142-0).

Huang, C.C., Hewak, D.W. and Badding, J.V. (2004) Direct synthesis of germanium sulphide glass planar waveguides by chemical vapour deposition (CVD). In, Proceedings of CLEO/IQEC 2004: Conference on Lasers and Electro-Optics, Quantum Electronics and Laser Science. CLEO/IQEC 2004: Conference on Lasers and Electro-Optics, Quantum Electronics and Laser Science USA, Institute of Electrical and Electronics Engineers.

Huang, Xi (2011) In-situ conductivity, temperature, and dissolved oxygen (CT-DO) sensor system for marine measurement. University of Southampton, Faculty of Physical and Applied Sciences, Doctoral Thesis , 204pp.

Huddleston, R. (2003) Computer assisted printed textiles. At public lecture given at Politecnico di Milano, Milano, Italy, 21 Mar 2003. (Submitted).

Ingelsson, Bo Urban (2009) Investigation into voltage and pocess variation-aware manufacturing test. University of Southampton, School of Electronics and Computer Science, Doctoral Thesis , 186pp.

Ingelsson, Bo Urban (2009) Investigation into voltage and process variation-aware manufacturing test. University of Southampton, School of Electronics and Computer Science, Doctoral Thesis , 186pp.

Jain, D., Baskiotis, C. and Sahu, J. (2014) Multi Trench Fiber: an ultra large mode area solution for industrial manufacturing. In, 2nd Annual EPSRC Manufacturing the Future Conference, Cranfield, UK, 17 - 18 Sep 2014.

Jiang, Liudi and Cheung, R. (2009) A Review of silicon carbide development in MEMS applications. International Journal of Nanomanufacturing, 2, (3/4), 225-240.

Jiang, Liudi, Pandraud, G., French, P.J., Spearing, S.M. and Kraft, M. (2007) Wafer bonding with nanoprecision alignment for micro/nano systems. In, Transducers & Eurosensors '07: 14th International Conference on Solid-State Sensors, Actuators and Microsystems, Lyon, France, 10 - 14 Jun 2007. USA, Institute of Electrical and Electronics Engineers, 2103-2106. (doi:10.1109/SENSOR.2007.4300580).

Jiang, Liudi and Spearing, S. Mark (2007) A reassessment of materials issues in microelectromechanical systems (MEMS). Journal of the Indian Institute of Science, 87, (3), 363-385.

Jones, R.T. and Abu-Sharkh, S.M. (1996) The use of finite element field analysis in investigating industrial electrostatic hazards. In, Industry Applications Conference, 1996. Thirty-First IAS Annual Meeting, IAS '96. Conference Record of the 1996 IEEE. Industry Applications Conference, 1996. Thirty-First IAS Annual Meeting, IAS '96 USA, Institute of Electrical and Electronics Engineers, 1851-1854. (doi:10.1109/IAS.1996.559321).

Jones, R.T., Williams, T.J. and Abu Sharkh, S. (1997) Assessment of industrial electrostatic hazards using finite-element electric field analysis. Journal of Electrostatics, 40-41, 449-454. (doi:10.1016/S0304-3886(97)00086-7).

Kecsmar, J. and Shenoi, R.A. (2004) Some notes on the influence of manufacturing on the fatigue life of welded aluminum marine structures. Journal of Ship Production, 20, (3), 164-175.

Kelly, Liam, Keane, Andy J., Sobester, Andras and Toal, David J.J. (2013) Automated structural design of a UAV fuselage for manufacture by selective laser sintering. In, CNM2013: Congress on Numerical Methods in Engineering, Bilbao, ES, 25 - 28 Jun 2013. 20pp.

Kessler, Seth S., Spearing, S.Mark and Dunn, Christopher T. (2004) Packaging of structural health monitoring components. In, Liu, Shih-Chi (ed.) Smart Structures and Materials 2004: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems. Bellingham, USA, International Society for Optical Engineering, 219-229. (Proceedings of SPIE, 5391). (doi:10.1117/12.538843).

Khereddine, A.Y., Larbi, F.H., Kawasaki, M., Baudin, T., Bradai, D. and Langdon, T.G. (2013) An examination of microstructural evolution in a Cu-Ni-Si alloy processed by HPT and ECAP. Materials Science and Engineering A, 576, 149-145. (doi:10.1016/j.msea.2013.04.004 ).

Kiang, K.S., Chong, H.M.H. and Kraft, M. (2010) A novel low cost spring-less RF MEMS switch prototype. [in special issue: Eurosensor XXIV Conference] Procedia Engineering, 5, 1462-1465. (doi:10.1016/j.proeng.2010.09.392).

Kittidachachan, Pattareeya, Danos, Lefteris, Meyer, Thomas J.J., Alderman, Nicholas and Markvart, Tom (2007) Photon collection efficiency of fluorescent solar collectors. CHIMIA International Journal for Chemistry, 61, (12), 780-786. (doi:10.2533/chimia.2007.780).

Kubair, D.V. and Spearing, S.M. (2006) Cohesive zone modelling of wafer bonding and fracture: effect of patterning and toughness variations. Journal of Physics D: Applied Physics, 39, (6), 1050-1057. (doi:10.1088/0022-3727/39/6/009).

Kubair, D.V. and Spearing, S.M. (2007) Cohesive zone model for direct silicon wafer bonding. Journal of Physics D: Applied Physics, 40, (10), 3070-3076. (doi:10.1088/0022-3727/40/10/010).

Kuleshova, Jekaterina, Hill-Cousins, Joseph T., Birkin, Peter R., Brown, Richard C.D., Pletcher, Derek and Underwood, Toby J. (2011) A simple and inexpensive microfluidic electrolysis cell. Electrochimica Acta, 56, (11), 4322-4326. (doi:10.1016/j.electacta.2011.01.036).

Kumar, A., Keane, A.J., Nair, P.B. and Shahpar, S. (2006) Robust design of compressor blades against manufacturing variations. In, Proceedings of the 2006 ASME International Design Engineering Technical Conferences & Computers and Information In Engineering Conference (IDETC/CIE 2006). USA, American Society Of Mechanical Engineers.

Kumar, A., Keane, A.J., Nair, P.B. and Shaphar, S. (2006) Efficient robust design for manufacturing process capability. In, 6th ASMO-UK/ISSMO International Conference on Engineering Design Opimization, Oxford, UK, 03 - 04 Jul 2006. UK, 8pp, 242-250.

Kumar, Apurva (2006) Robust design methodologies: application to compressor blades. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 170pp.

Kumar, Shanmugan, Scanlan, J.P., Eres, M.H. and Reed, P.A.S. (2011) Fatigue life prediction for life cycle costing of gas turbine engines. International Journal of Production Economics (Submitted).

Lam, Yu-Zhi and Atkinson, John, Atkinson, John (ed.) (2002) Disposable screen-printed biosensor for transcutaneous oxygen measurement. Measurement Science and Technology, 13, 2074-2081. (doi:10.1088/0957-0233/13/12/336).

Langmaak, Stephan, Scanlan, James and Wiseall, Stephen (2011) Strategic jet engine System design in light of uncertain fuel and carbon prices. In, 2nd International Air Transport and Operations Symposium (ATOS 2011), Delft, NL, 28 - 29 Mar 2011. 7pp.

Langmaak, Stephan, Scanlan, James P., Wiseall, Stephen and Sobester, Andras (2011) Strategic jet engine system design in light of uncertain fuel and carbon prices. In, 11th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference, Virginia Beach, US, 20 - 22 Sep 2011. 16pp.

Langmaak, Stephan, Wiseall, Stephen, Bru, Christophe, Adkins, Russell, Scanlan, James and Sóbester, András (2013) An activity-based-parametric hybrid cost model to estimate the unit cost of a novel gas turbine component. International Journal of Production Economics, 142, (1), 74-88. (doi:10.1016/j.ijpe.2012.09.020).

Lee, I-Fang, Phan, Thien, Levine, Lyle E., Tischler, Jonathan Z., Geantil, Peter T., Huang, Yi, Langdon, Terence G. and Kassner, Michael E. (2013) Using X-ray microbeam diffraction to study the long-range internal stresses in aluminum processed by ECAP. Acta Materialia, 61, 7741-7748. (doi:10.1016/j.actamat.2013.09.013).

Leekitwattana, M. (2011) Analysis of an alternative topology for steel-concrete-steel sandwich beams incorporating inclined shear connectors. University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 243pp.

Lennard, F.J. and Dew, C. (2003) Case study: 'Preview: Hoarfrost Edition' by Robert Rauschenberg. In, Before Art Falls Apart: Achieving Consensus on Care, Protection and Value (seminar), Royal Society of Arts, UK, 28 Oct 2003. (Submitted).

Leung, S., Tsang, S. and Wu, Y. (2004) A scenario-based optimization model for aggregate production planning. In, Proceedings of the 33rd International Conference on Computers and Industrial engineering. 33rd International Conference on Computers and Industrial Engineering , Computers and Industrial Engineering, an International Journal, 1-6.

Leung, S.C.H., Wu, Y. and Lai, K.K. (2006) Cross-border logistics with fleet management: a goal programming approach. Computer & Industrial Engineering, 50, (3), 263-272. (doi:10.1016/j.cie.2006.04.003).

Li, Wensheng, Liu, Yi, Wang, Zhiping, Ma, Chao and Wang, S.C. (2012) Effects of Ce in novel bronze and its plasma sprayed coating. Transactions of Nonferrous Metals Society of China, 22, (9), 2139-2145. (doi:10.1016/S1003-6326(11)61440-4).

Li, Yi, Torah, Russel, Beeby, Steve and Tudor, John (2012) An all-inkjet printed flexible capacitor on a textile using a new poly(4-vinylphenol) dielectric ink for wearable applications. In, IEEE Sensors 2012, Taipei, TW, 28 - 31 Oct 2012. 4pp.

Lienemann, Holger, Shrimpton, John and Fernandes, Edgar (2007) A study on the aerodynamic instability of attenuating liquid sheets. Experiments in Fluids, 42, (2), 241-258. (doi:10.1007/s00348-006-0234-6).

Lockton, Dan, Harrison, David and Stanton, Neville A. (2013) Exploring design patterns for sustainable behaviour. The Design Journal, 16, (4), 431-459. (doi:10.2752/175630613X13746645186124).

Loscombe, R. (1987) An exploratory study of alternative structural materials for small SWATH craft. Southampton, UK, University of Southampton, 87pp. (Ship Science Reports, (34) ).

Lu, C.-H., Maddox, B.R., Remington, B.A., Brigna, E.M., Kawasaki, M., Langdon, T.G., Park, H.-G., Kad, B. and Meyers, M.A. (2012) Laser compression of nanocrystalline tantalum. AIP Conference Proceedings, 1426, 1387-1390. (doi:10.1063/1.3686540).

Lu, L., Currie, C.S.M., Cheng, R.C.H. and Ladbrook, J. (2007) Classification analysis for simulation of machine breakdowns. In, Henderson, S.G., Biller, B., Hsieh, M.-H., Shortle, J., Tew, J.D. and Barton, R.R. (eds.) Proceedings of the 2007 Winter Simulation Conference. Winter Simulation Conference 2007 , Institute of Electrical and Electronics Engineers, 480-487. (doi:10.1109/WSC.2007.4419638).

Lu, Xuesong, Lee, Yoonjae, Yang, Shoufeng, Hao, Yang, Evans, Julian and Parini, Clive (2009) Extrusion freeforming of millimeter wave electromagnetic bandgap (EBG) structures. Rapid Prototyping Journal, 15, (1), 42-51. (doi:10.1108/13552540910925054).

Macbeth, Douglas K. and Southern, Geoff (1989) Advanced manufacture and services: common issues, common approaches, Cambridge, UK, IFS, 180pp.

Manville, G. and Burt, C. (2008) Developing a best practice model for performance measurement in the manufacturing sector. A performance measurement critique of a UK manufacturing organisation. In, Gstraunthaler, T. and Messner, M. (eds.) Performance in context - perspectives from management research. , Innsbruck University Press.

Marius, M.S., James, P.A.B., Bahaj, A.S. and Smallman, D.J. (2005) Influence of iron valency on the magnetic susceptibility of a microbially produced iron sulphide. Journal of Physics: Conference Series, 17, 65-69. (doi:10.1088/1742-6596/17/1/011).

Matthews David, A. (2004) Seeing is deceiving: camouflage, concealing-colouration and fashion during WW1. In, Veronika Gervers Annual Memorial Lecture, Royal Ontario Museum, Toronto, Canada, 16 Jan 2004.

Mbuya, Thomas O. and Reed, P.A.S. (2014) Micromechanisms of short fatigue crack growth in an Al-Si piston alloy. Materials Science and Engineering A, 612, 302-309. (doi:10.1016/j.msea.2014.06.046).

McBride, J.W. and Cross, K.J. (1996) The measurement and analysis of the three-dimensional form of curved surfaces. International Journal of Machine Tools Manufacture, 36, (5), 597-610. (doi:10.1016/0890-6955(95)00051-8).

McBride, J.W., Hill, M. and Jung, M. (1997) The analysis of the form of aspheric lens surfaces. In, Ford, D.G. and Postlethwaite, S.R. (eds.) Laser Metrology & Machine Performance III. International Conference on Laser Metrology and Machine Performance III UK, Computational Mechanics, 381-392. (Transactions on Engineering Sciences, 16).

Miller, L.E. (2004) Comprando seda en el siglo XVIII en Madrid (Shopping for silks in eighteenth century Madrid). Datatextil, (10), 4-7.

Moktadir, Zakaria and Mizuta, Hiroshi (2013) Magnetoresistance in inhomogeneous graphene/metal hybrids. Journal of Applied Physics, 113, 083907-[6pp]. (doi:10.1063/1.4793647).

Mucci, Peter (1998) The design of an optical cell for the infra-red analysis of plastic materials. Journal of Engineering Design, 9, (1), 47-56. (doi:10.1080/095448298261660).

Ogilvie, I.R.G., Sieben, Vincent J., Floquet, C.F.A., Mowlem, M.C. and Morgan, Hywel (2010) Solvent processing of PMMA and COC chips for bonding devices with optical quality surfaces. In, Verpoorte, S., Andersson-Svahn, H., Emnéus, J. and Pamme, N. (eds.) 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences. MicroTAS 2010: 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences Stoughton, US, The Printing House for Chemical and Biological Microsystems Society, 1244-1246.

Ovid'ko, I.A. and Langdon , T.G. (2012) Enhanced ductility of nanocrystalline and ultrafine-grained metals. Reviews on Advanced Materials Science, 30, (2), 103-111.

Possani, Edgar (2001) Lot streaming and batch scheduling: splitting and grouping jobs to improve production efficiency. University of Southampton, Department of Mathematics, Doctoral Thesis , 162pp.

Potts, C.N. and Whitehead, J.D. (2001) Workload balancing and loop layout in the design of a flexible manufacturing system. European Journal of Operational Research, 129, (2), 326-336. (doi:10.1016/S0377-2217(00)00230-7).

Prentice, D.R. (1979) Methods to determine the behaviour of a ferrocement panel. Southampton, UK, University of Southampton, 76pp. (Ship Science Reports, (4/78) ).

Pruneri, V., Lucchi, F., Belmonte, M., Myrén, Niklas, Margulis, Walter, Corbari, C., Deparis, O., Kazansky, P.G., Fage-Pederson, Jacob, Kristensen, Martin, Pastor, Daniel, Ortega, Beatriz, Capmany, Jose, Martinelli, G., Quiquempois, Y., Kudlinski, H., Zeghlache, H., Poumellec, B., Liu, Q., Blum, R., Ferraris, Monica, Menke, Yvonne, Billes, Laurent, Meyer, Christophe and Plouzennec, Loig (2003) "The Glamorous" European project (glass-based modulators, routers and switches). In, Bragg Gratings, Photosensitivity and Poling in Glass Waveguides (BGPP 2003), Monterey, USA, 01 - 03 Sep 2003. 3pp.

Qiao, Xiaoguang, Gao, Nong, Moktadir, Zakaria, Kraft, Michael and Starink, Marco J. (2010) Fabrication of MEMS components using ultrafine-grained aluminium alloys. Journal of Micromechanics and Microengineering, 20, (4), 045029-[9pp]. (http://dx.doi.org/10.1088/0960-1317/20/4/045029).

Quinn, D.J., Spearing, S.M., Ashby, M.F. and Fleck, N.A. (2006) A systematic approach to process selection in MEMS. Journal of Microelectromechanical Systems, 15, (5), 1039-1050. (doi:10.1109/JMEMS.2006.880292).

Rao, A. (2006) Manufacturing cost based methodologies for design optimisation. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 202pp.

Rao, A.R., Keane, A.J. and Scanlan, J.P. (2005) A Cost based Methodology for Design Optimization. In, ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Long Beach, California, USA, 24 - 28 Sep 2005. , 1-10. (Submitted).

Rao, A.R., Scanlan, J.P. and Keane, A.J. (2007) Applying multiobjective cost and weight optimization to the initial design of turbine disks. Journal of Mechanical Design, 129, (12), 1303-1310. (doi:10.1115/1.2779899).

Reed, Nicholas (2010) Development and evaluation of a design support system. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 370pp.

Riley, M.J. and Brown, D.C. (2001) Comparison of cultures in construction and manufacturing industries. Journal of Management in Engineering, 17, (3), 149-158. (doi:10.1061/(ASCE)0742-597X(2001)17:3(149)).

Rincón, B., Sánchez, E., Raposo, F., Borja, R., Travieso, L., Martin, M.A. and Martin, A. (2008) Effect of the organic loading rate on the performance of anaerobic acidogenic fermentation of two-phase olive mill solid residue. Waste Management, 28, (5), 870-877. (doi:10.1016/j.wasman.2007.02.030).

Roberts, S.C. and Aglietti, G.S. (2008) Satelitte multifunctional power structure: feasibility and mass savings. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 222, (1), 41-51. (doi:10.1243/09544100JAERO255).

Roth, Silke (1997) Garment industry and women: labor movement and women. In, McFadden, Margaret (ed.) Ready Reference: Women's Issues. Pasadena, USA, Salem Press, 367-493.

Ruud, Teunter, Tang, Ou and Kaparis, Konstantinos (2009) Heuristics for the economic lot scheduling problem with returns. [In special section on problems and models of inventories selected papers of the fourteenth International symposium on inventories]. International Journal of Production Economics, 118, (1), 323-330. (doi:10.1016/j.ijpe.2008.08.036).

Safaeian, Davood and Vaezi, Mohammad (2009) Investment casting of gas turbine blade by used of rapid technologies. Australian Journal of Basic and Applied Sciences, 3, (3), 2979-2988.

Sahin, M., Dokos, L., Chambers, A., Dulieu-Barton, J., Eastop, D., Lennard, F. and Earl, J.S. (2006) Mechanical testing for condition assessment of tapestries. In, Lennard, F., Hayward, M. and Barton, J (eds.) Tapestry Conservation: Principles and Practice. London, UK, Elsevier.

Sazio, P.J.A., Berg, J., See, P., Ford, C.J.B., Lundgren, P., Greenham, N.C., Ginger, D.S., Bengtsson, S. and Chin, S.N. (2001) A silicon structure for electrical characterisation of nanoscale elements. In, Materials Research Society Symposium Proceedings. 2001 MRS Spring Meeting USA, Materials Research Society.

Schumann, Benjamin, Ferraro, Mario and Surendra, Amrith et al. (2013) Better design decisions through operational modeling during the early design phases. Journal of Aerospace Information Systems, n/a, 1. (In Press).

Scott, A.E. Mavrogordato, Mark N., Wright, Peter, Sinclair, I. and Spearing, S.M. (2011) In situ fibre fracture measurement in carbon–epoxy laminates using high resolution computed tomography. Composites Science and Technology, 71, (12), 1471-1477. (doi:10.1016/j.compscitech.2011.06.004).

Shenoi, R.A. (1990) Structural producibility considerations at a preliminary design level. Southampton, UK, University of Southampton, 23pp. (Ship Science Reports, (40) ).

Shim, Dong Jin, Sun, Hong-Wei, Vengallatore, S.T. and Spearing, S.M. (2006) Damage and failure in silicon-glass-metal microfluidic joints for high-pressure MEMS devices. Journal of Microelectricalmechanical Systems, 15, (1), 246-258. (doi:10.1109/JMEMS.2005.859205).

Shrimpton, J.S., Jasion, G., Yang, Shoufeng and Li, Z. (2013) On the bridging mechanism in vibration controlled dispensing of pharmaceutical powders from a micro hopper. Powder Technology, 249, 24-37. (doi:10.1016/j.powtec.2013.07.027).

Snook, Colin, Poppleton, Michael and Johnson, Ian (2008) Rigorous engineering of product-line requirements: a case study in failure management. [in special issue: Section 1: Most-cited software engineering articles in 2001. Section 2: Requirement engineering: Foundation for software quality] Information and Software Technology, 50, (1-2), 112-129. (doi:10.1016/j.infsof.2007.10.010).

Sobey, A.J., Blake, J.I.R. and Shenoi, R.A. (2013) Implementation of a generic concurrent engineering environment framework for boatbuilding. Journal of Marine Science and Technology, 18, (2), 262-13. (doi:10.1007/s00773-012-0205-y).

Sobey, Adam, Blake, James and Shenoi, Ajit (2009) Design histories for enhanced concurrent structural design. World Academy of Science, Engineering & Technology, 3, (2), 76-87.

Sobey, Adam James (2010) Concurrent engineering in the context of the composite leisure boatbuilding industry. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 207pp.

Stanley, Felix (2010) Dimensional reduction and design optimization of gas turbine engine casings for tip clearance studies. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 220pp.

Suhot, Mohamed Azlan (2010) The effect of voids on the flexural fatigue properties of carbon/epoxy composites. Univiersity of Southampton, School of Engineering Sciences, Doctoral Thesis , 239pp.

Summerfield, A. Quentin, Barton, G.R., Toner, J., McAnallen, C., Proops, D., Harries, C., Cooper, H., Court, I., Gray, R., Osborne, J., Doran, M., Ramsden, R., Mawman, D., O'Driscoll, M., Graham, J., Aleksy, W., Meerton, L., Verschure, C., Ashcroft, P. and Pringle, M. (2006) Self-reported benefits from successive bilateral cochlear implantation in post-lingually deafened adults: randomised controlled trial. Beneficios auto-reportados en la implantación coclear bilateral consecutiva en adultos ensordecidos postlingüísticos: prueba aleatoria controlada. International Journal of Audiology, 45, (Supplement 1), 99-107. (doi:10.1080/14992020600783079).

Sun, Kai, Hakim, M.M.A., Kong, J., de Planque, M.R.R., Morgan, H., Roach, P.L., Davies, D.E., Howarth, P. and Ashburn, P. (2010) Low cost nanowire biosensor fabrication using thin film amorphous silicon crystallisation technologies. At IDRN, Leceister, UK, 14 May 2010.

Sutherland, L.S., Shenoi, R.A. and Lewis, S.M. (1999) Size and scale effects in composites: I. Literature review. Composites Science and Technology, 59, (2), 209-220. (doi:10.1016/S0266-3538(98)00065-7).

Sutherland, L.S., Shenoi, R.A. and Lewis, S.M. (1999) Size and scale effects in composites: II. Unidirectional laminates. Composites Science and Technology, 59, (2), 221-233. (doi:10.1016/S0266-3538(98)00083-9).

Sutherland, L.S., Shenoi, R.A. and Lewis, S.M. (1999) Size and scale effects in composites: III. Woven-roving laminates. Composites Science and Technology, 59, (2), 235-251. (doi:10.1016/S0266-3538(98)00106-7).

Syngellakis, S. (2000) Developments in boundary element applications to polymer analysis. In, Brebbia, C.A. and Power, H. (eds.) Boundary Elements XXII. BEM 22: 22nd International Conference on the Boundary Element Method Southampton, UK, Wessex Institute of Technology, 319-328. (Modelling and Simulation, 26). (doi:10.2495/BE000311).

Sánchez, E., Rincón, B., Borja, R, Travieso, L., Raposo, F. and Colmenarejo, M.F. (2007) Aerobic degradation kinetic of the effluent derived from the anaerobic digestion of two-phase olive mill solid residue. International Biodeterioration & Biodegradation, 60, (1), 60-67. (doi:10.1016/j.ibiod.2006.10.002).

Tammineni, S.V., Scanlan, J.P. and Reed, P.A.S. (2007) Expert decision support system for costing of aircraft gas turbine engine. In, Proceedings of GT-2007 ASME Turbo Expo 2007: Power for Land, Sea and Air. GT-2007 ASME Turbo Expo 2007: Power for Land, Sea and Air USA, American Society Of Mechanical Engineers, 9pp. (In Press).

Teunter, Ruud, Kaparis, Konstantinos and Tang, Ou (2008) Multi-product economic lot scheduling problem with separate production lines for manufacturing and remanufacturing. European Journal of Operational Research, 191, (3), 1241-1253. (doi:10.1016/j.ejor.2007.08.003).

Thakur, Nikita (2010) Probabilistic manufacturing variability quantification from measurement data for robust design of turbine blades. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 194pp.

Thokala, Praveen (2009) Life cycle cost modelling as an aircraft design decision support tool. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 205pp.

Thomas, John Meurig and Raja, Robert (2006) The advantages and future potential of single-site heterogeneous catalysts. Topics in Catalysis, 40, (1-4), 3-17. (doi:10.1007/s11244-006-0105-7).

Unwin, Lorna, Fuller, Alison, Bishop, Daniel, Felstead, Alan, Jewson, Nick and Kakavelakis, Konstantinos (2008) Exploring the dangers and benefits of the UK's competence-based approach: the use of vocational qualifications as learning artefacts and tools for measurement in the automotive sector. Cardiff, UK, Cardiff School of Social Sciences, 30pp. (Learning as Work Research Paper, (15) ).

Vaezi, Mohammad Chua, Chee Kai and Chou, Siaw Meng (2012) Improving the process of making rapid prototyping models from medical ultrasound images. Rapid Prototyping Journal, 18, (4), 287-298. (doi:10.1108/13552541211231716).

Vaezi, Mohammad (2012) Rapid prototyping of biomaterials. At 19th Joint Conference of CSCST & SCI, Reading, GB, 15 Sep 2012.

Vaezi, Mohammad (2013) 3D printing of PEEK and bioceramics for healthcare applications. At BioXneT, Southampton, GB,

Vaezi, Mohammad (2013) Advances in dry powder printing. At 20th Joint Conference of CSCST & SCI, London, GB, 14 Sep 2013.

Vaezi, Mohammad (2013) 3D printing of tissue engineeing scaffolds for healthcare application. At Annual PG Conference, Southampton, GB, 23 Oct 2013.

Vaezi, Mohammad (2014) 3D Printing of bioactive PEEK OPTIMA and porous scaffolds. At 2014 Materials Research Exchange: UK Advanced Materials Research Showcase, Coventry, GB, 25 Feb 2014.

Vaezi, Mohammad, Chianrabutra, Srisit, Mellor, Brian and Yang, Shoufeng (2013) Multiple material additive manufacturing – Part 1: a review. Virtual and Physical Prototyping, 8, (1), 19-50.

Vaezi, Mohammad and Chua, Chee Kai (2011) Effects of layer thickness and binder saturation level parameters on 3D printing process. International Journal of Advanced Manufacturing Technology, 53, (1-4), 275-284. (doi:10.1007/s00170-010-2821-1).

Vaezi, Mohammad, Kruger, Hannes and Yang, Shoufeng (2014) 3D printing of magnetorheological elastomers (MREs) smart materials. In, 1st International Conference on Progress in Additive Manufacturing, Singapore, SG, 26 - 28 May 2014. Research Publishing Services, 213-218. (doi:10.3850/978-981-09-0446-3 088).

Vaezi, Mohammad, Li, Zongqi, Yang, Shoufeng, Chant, Jordan, Jarman-Smith, Marcus and Wilson, Jo (2013) Novel method for making homogeneous bioactive PEEK compounds using an ultrasonic co-feeding and on-line mixing system. In, 1st PEEK conference, Philadelphia, US, 25 - 26 Apr 2013.

Vaezi, Mohammad, Safaeian, Davood and Chua, Chee Kai (2011) Gas turbine blade manufacturing by use of epoxy resin tooling and silicone rubber molding techniques. Rapid Prototyping Journal, 17, (2), 107-115. (doi:10.1108/13552541111113853).

Vaezi, Mohammad, Safaeian, Davood and Shakeri, Mohsen (2011) Integration of reverse engineering and rapid technologies for rapid investment casting of gas turbine blades. Virtual and Physical Prototyping, 6, (4), 225-239. (doi:10.1080/17452759.2011.631173).

Vaezi, Mohammad, Seitz, Hermann and Yang, Shoufeng (2013) A review on 3D micro-additive manufacturing technologies. The International Journal of Advanced Manufacturing Technology, 67, (5-8), 1721-1754. (doi:10.1007/s00170-012-4605-2).

Vaezi, Mohammad and Shakeri, Mohsen (2009) Experimental study of effective parameters in 3D printing. At 10th Iranian Conference of Manufacturing Engineering, Babol, IR, 01 - 03 Mar 2010.

Vaezi, Mohammad and Soleimani, Masoud (2009) Creep life prediction of IN738 gas turbine blade. Journal of Applied Sciences, 9, (10), 1950-1955. (doi:10.3923/jas.2009.1950.1955 ).

Vaezi, Mohammad and Soleimani, Masoud (2009) Quality control of quick response products by used of reverse engineering technologies. Journal of Applied Sciences, 9, (13), 2424-2430. (doi:10.3923/jas.2009.2424.2430 ).

Vaezi, Mohammad and Yang, Shoufeng (2013) Freeform fabrication of nano-biomaterials using 3D printing. In, Narayan, R. (ed.) Rapid Prototyping of Biomaterials: Principles and Applications. Cambridge, GB, Woodhead.

Vaezi, Mohammad and Yang, Shoufeng (2014) HA enhanced bioactive PEEK OPTIMA for orthopedic applications. At Multidisciplinary Research: Health Technologies USRG , Southampton, GB, 19 Feb 2014.

Vaezi, Mohammad and Yang, Shoufeng (2014) Investigation of process parameters in extrusion freeforming to make high resolution bioceramic lattice structures. At International Conference on Progress in Additive Manufacturing (Pro-AM 2014), Singapore, SG, 26 - 28 May 2014.

Vaezi, Mohammad, Yang, Shoufeng, Black, Cameron, Gibbs, David and Oreffo, Richard O.C. (2014) Extrusion freeformed integrated synthetic bone graft and fracture fixation system. At International Conference on Progress in Additive Manufacturing (Pro-AM 2014), Singapore, SG, 26 - 28 May 2014.

Vaezi, Mohammad, Yang, Shoufeng and Brady, Mark (2014) Extrusion freeformed hydroxyapitite (ha) incorporated into polyether ether ketone (peek). At International Conference on Progress in Additive Manufacturing (Pro-AM 2014), Singapore, SG, 26 - 28 May 2014.

Valiev, R.Z. and Langdon, T.G. (2006) Developments in the use of ECAP processing for grain refinement. Reviews on Advanced Materials Science, 13, (1), 15-26.

Valiev, Ruslan Z. and Langdon, Terence G. (2006) Principles of equal-channel angular pressing as a processing tool for grain refinement. Progress in Materials Science, 51, (881), 881-981. (doi:10.1016/j.pmatsci.2006.02.003).

Veres, Galina, Middleton, Lee, Sabeur, Zed, Bouchrika, Imed, Arbab-Zavar, Banafshe, Carter, John, Nixon, Mark, Grabner, Helmut, Stalder, Severin, Van Gool, Luc, Morzinger, Roland, Thaler, Marcus, Rene, Schuster, Albert, Hofman and Thallinger, Georg (2010) Tools for semi-automatic monitoring of industrial workflows. In, ACM Multimedia 2010, Florence, IT, 25 - 29 Oct 2010.

Vernon, Guy (1999) Working conditions, the logic of industrialism and the balance of social forces: exploring convergence and diversity across nations' manufacturing industry. Oxford, UK, [Centre on] Skills, Knowledge and Organisational Performance, 30pp. (SKOPE Research Papers, (2) ).

Vitanov, V.I. and Voutchkov, I.I. (2005) Process parameters selection for friction surfacing applications using intelligent decision support. Journal of Materials Processing Technology, 159, (1), 27-32. (doi:10.1016/j.jmatprotec.2003.11.006).

Voyce, C.J., Fitt, A.D. and Monro, T.M. (2008) The mathematical modelling of rotating capillary tubes for holey-fibre manufacture. Journal of Engineering Mathematics, 60, (1), 69-87. (doi:10.1007/s10665-006-9133-3).

Voyce, C.J., Fitt, A.D. and Monro, T.M. (2008) Mathematical modeling as an accurate predictive tool in capillary and microstructured fiber manufacture: the effects of preform rotation. IEEE Journal of Lightwave Technology, 26, (7), 791-798. (doi:10.1109/JLT.2007.914515).

Wahba, J. (1994) The transmission of Dutch disease and labour migration. Southampton, UK, University of Southampton (Discussion Papers in Economics and Econometrics, 9412).

Wang, Xudi, Chen, Yifang, Banu, Shahanara, Morgan, Hywel, Fu, Shaojun and Cui, Zheng (2007) High density patterns fabricated in SU-8 by UV curing nanoimprint. [in special issue: Proceedings of the 32nd International Conference on Micro- and Nano-Engineering] Microelectronic Engineering, 84, (5-8), 872-876. (doi:10.1016/j.mee.2007.01.027).

Wei, Yang, Torah, Russel, Yang, Kai, Beeby, Steve and Tudor, John (2012) A novel fabrication process for capacitive cantilever structures for smart fabric applications. In, Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS 2012, Cannes, FR, 25 - 27 Apr 2012. 4pp, 136-139.

White, Anthony S., Shen, Siu-Tsen and Prior, Stephen D. (2008) Including design in e-manufacturing. International Journal of Electronic Business Management, 6, (2), 99-105.

Williams, T.M. (1994) Managing risk in development and initial production. International Journal of Production Research, 32, (7), 1591-1597. (doi:10.1080/00207549408957024).

Williams, Terry, Eden, Colin, Ackermann, Fran and Tait, Andrew (1995) The effects of design changes and delays of project costs. Journal of the Operational Research Society, 46, (7), 809-818.

Williams, Terry, Eden, Colin, Ackermann, Fran and Tait, Andrew (1995) Vicious circles of parallelism. International Journal of Project Management, 0263-7863, (3), 151-155. (doi:10.1016/0263-7863(95)00034-N).

Wong, J.S., Scanlan, J.P. and Eres, M.H. (2009) An integrated life cycle cost tool for aero-engines. In, 6th International Product Lifecycle Management Conference, Bath, UK, 06 - 08 Jul 2009. (Submitted).

Wongsa-Ngam, Jittraporn, Wen, Haiming and Langdon, Terence G. (2013) Microstructural evolution in a Cu-Zr alloy processed by a combination of ECAP and HPT. Materials Science and Engineering A, 579, 126-135. (doi:10.1016/j.msea.2013.05.010).

Wright, M. C. M. (2002) Graphical analysis of bra size calculation procedures. International Journal of Clothing Science and Technology, 14, (1), 41-45. (doi:10.1108/09556220210420327).

Wright, Peter Michael (2011) Investigation of damage in laminated carbon fibre composites using high resolution computed tomography. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 167pp.

Wu, Xiaoqing, Li, Jialu and Shenoi, R. Ajit (2006) Measurement of braided form permeability. Composites Science and Technology, 66, (15), 3064-3069. (doi:10.1016/j.compscitech.2005.12.021).

Wu, Xiaoqing, Li, Jialu and Shenoi, R.A. (2007) A new method to determine fiber transverse permeability. Journal of Composite Materials, 41, (6), 747-756. (doi:10.1177/0021998306067012).

Wyeth, P., Garside, P., Farwell, D., Edwards, H. and Acton, L. (2003) Vibrational microspectroscopic characterisation of sailcloth: monitoring the deterioration of historic marine textiles. In, International Conference on the Application of Raman Spectroscopy in Art and Archaeology, Ghent, Belgium, 03 - 06 Sep 2003.

Wyeth, P. and Takami, M. (2002) Studies on a Korean painted silk banner: identification of layer structure, binding medium and pigments. In, North American Textile Conservation Conference, Philadelphia, USA and Winterhur, Switzerland, 2002. Philadelphia, USA, NATCC, 135-144.

Xu, F. and Brambilla, G. (2007) Manufacture of 3-D microfiber coil resonators. IEEE Photonics Technology Letters, 19, (19), 1481-1483. (doi:10.1109/LPT.2007.903762).

Xu, Fei and Brambilla, Gilberto (2007) Embedding optical microfiber coil resonators in Teflon. Optics Letters, 32, (15), 2164-2166.

Yang, Kai, Torah, Russel, Wei, Yang, Beeby, Steve and Tudor, John (2013) Waterproof and durable screen printed silver conductive tracks on textiles. Textile Research Journal (doi:10.1177/0040517513490063).

Zhang, Jianfa, Ou, Jun-Yu, Papasimakis, Nikitas, Chen, Yifang, MacDonald, Kevin F. and Zheludev, Nikolay I. (2012) Control of metal color using surface relief metamaterial nanostructuring. SPIE Newsroom, 1-2. (doi:10.1117/2.1201201.004119 ).

Zhang, P., An, A.H., Zhang, Z.J., Wu, S.D., Li, S.X., Zhang, Z.F., Figueiredo, R.B., Gao, N. and Langdon, T.G. (2012) Optimizing strength and ductility of Cu-Zn alloys through severe plastic deformation. Scripta Materialia, 67, (11), 871-874. (doi:10.1016/j.scriptamat.2012.07.040).

Zhilyaev, Aleander P. and Langdon, Terence G. (2013) Microhardness and EBSD microstructure mapping in partially-pressed Al and Cu through 90 degrees ECAP die. Materials Research-Ibero-American Journal of Materials, 16, (3), 586-591. (doi:10.1590/S1516-14392013005000037).

This list was generated on Sat Oct 25 01:47:57 2014 BST.