Items where Subject is "V Naval Science > VM Naval architecture. Shipbuilding. Marine engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
[tool] Add To Shelf...
Group by: Authors/Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | X | Z
Number of items at this level: 800.

A

Abdul Ghani, M.P. and Wilson, P.A. (2009) Experimental analysis of catamaran forms with bulbous bows operating in shallow water. International Shipbuilding Progress, 56, (1/2), 29-57. (doi:10.3233/ISP-2009-0054).

Abu Sharkh, S.M., Turnock, S.R. and Hughes, A.W. (2003) Design and performance of an electric tip-driven thruster. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 217, (3), 133-147. (doi:10.1243/147509003322255840).

Abu-Sharkh, S. and Harris, M. (1996) Electric thrusters for autonomous underwater vehicles. In, Proceedings of IEE Colloquium on Autonomous Underwater Vehicles and their Systems: Recent Developments and Future Prospects. IEE Colloquium on Autonomous Underwater Vehicles and their Systems: Recent Developments and Future Prospects USA, Institute of Electrical and Electronics Engineers, 1-6.

Abu-Sharkh, S.M. (2003) Permanent magnet machines for underwater thrusters. In, 5th Joint UK Magnetics Workshop, Glasgow, UK, 02 - 04 Jul 2003.

Abu-Sharkh, S.M. and Griffiths, G. (2003) Energy storage systems for unmanned underwater vehicles. Underwater Technology, 25, (3), 143-148. (doi:10.3723/175605403783379714).

Abu-Sharkh, S.M., Turnock, S.R. and Draper, G. (2001) Performance of a tip-driven electric thrusters for unmanned underwater vehicles. In, The Proceedings of The Eleventh (2001) International Offshore and Polar Engineering Conference. The Eleventh (2001) International Offshore and Polar Engineering Conference Mountain View, USA, International Society of Offshore and Polar Engineers (ISOPE), 321-324.

Abu-Sharkh, Suleiman M. (2002) Populsion systems for AUV's. In, Griffiths, Gwyn (ed.) Technology and Applications of Autonomous Underwater Vehicles. Abingdon, UK, Taylor & Francis, 109-126. (Ocean and Earth Science Technology, 2).

Ahmed, T., Hudson, D.A. and Temarel, P. (2001) Effects of hull geometry and irregular frequencies on three-dimensional seakeeping predictions. In, NuTTS 2001: Fourth Numerical Towing Tank Symposium, Hamburg, Germany, Sep 2001. 4pp.

Ahmed, T.M., Du, S.X., Hudson, D.A., Kingsland, P.W. and Temarel, P. (2005) Improvement of seakeeping prediction methods for high speed vessels with a transom stern. In, Eighth International Conference on Fast Sea Transportation, St. Petersburg, Russia, 27 - 30 Jun 2005.

Ahmed, T.M., Hudson, D.A., Temarel, P. and Ballard, E.J. (2006) Prediction of parametric roll resonance in longitudinal regular waves using a non-linear method. In, Proceedings of the 9th International Conference on Stability of Ships and Ocean Vehicles (STAB2006), Rio de Janeiro, Brazil, 25 - 29 Sep 2006. Brazil, 8pp.

Akhtman, J., Furlong, M., Palmer, A., Phillips, A.B., Sharkh, S.M. and Turnock, S.R. (2008) SotonAUV: the design and development of a small, manoeuvreble autonomous underwater vehicle. Underwater Technology, 28, (1), 31-34. (doi:10.3723/ut.28.031).

Alexandru, I., Brizzolara, S., Viviani, M., Couty, N., Donner, R., Hermundstad, O., Kukkanen, T., Malenica, S. and Temarel, P. (2007) Comparison of experimental and numerical impact loads on ship-like sections. In, Advancements in Marine Structures : Proceedings of Marstruct 2007, the 1st International Conference on Marine Structures. Advancements in Marine Structures: 1st International Conference on Marine Structures (MARSTRUCT 2007) UK, Taylor & Francis, 339-349.

Allen, D.P., Taunton, D.J. and Allen, R. (2008) A study of shock impacts and vibration dose values onboard highspeed marine craft. International Journal of Maritime Engineering, 150, (A3), 1-10.

Allen, R. (2003) Guidance and Control of Underwater Vehicles. In, Roberts, G.N., Sutton, R. and Allen, R. (eds.) Guidance and Control of Underwater Vehicles 2003. , Elsevier.

Allen, R. (1998) Subzero. In, Remotely Operated Vehicles of the World: 1998-99 Edition. Ledbury, UK, Oilfield Publications, p.160. (Vessels of the World).

Allen, R. (2006) Subzero. In, Remotely Operated Vehicles of the World: 7th Edition. Ledbury, UK, Oilfield Publications, 227-228. (Vessels of the World).

Allen, R. (2010) Subzero. In, Remotely Operated Vehicles of the World. 9th Edition. Ledbury, UK, Oilfield Publications. (Vessels of the World).

Asif, M., Arshad, M.R. and Wilson, P.A. (2005) AGV guidance system: an application of simple active contour for visual tracking. In, Proceedings of Enformatika: Transactions on Engineering, Computing and Technology. Enformatika 2005 Madrid, Spain, World Academy of Science, Engineering and Technology, 74-77.

Austin, S and Wilson, P.A. (2009) Improving the Voyage Data Recorder. Digital Ship, 24-26.

Austin, S., Forestier, J-M., Winkley, C. and Wilson, P.A. (2008) VDR - the next generation. Digital Ship, 45-47.

Austin, S.C. and Wilson, P.A. (2010) D6 - draft amendments to existing VDR standards. Southampton, GB, University of Southampton, 36pp. (D6).

B

Badoe, C., Phillips, A.B. and Turnock, S.R. (2012) Initial numerical propeller rudder interaction studies to assist fuel efficient shipping. In, NuTTs 2012: 15th Numerical Towing Tank Symposium, Cortona, IT, 07 10 2012.

Badoe, C., Phillips, A.B. and Turnock, S.R. (2012) Numerical propeller rudder interaction studies to assist fuel efficient shipping. In, Low Carbon Shipping Conference, Newcastle upon Tyne, GB, 11 - 12 Sep 2012. , 1-10.

Bahaj, A.S., Molland, A.F., Chaplin, J.R. and Batten, W.M.J. (2007) Power and thrust measurements of marine current turbines under various hydrodynamic flow conditions in a cavitation tunnel and a towing tank. Renewable Energy, 32, (3), 407-426. (doi:10.1016/j.renene.2006.01.012).

Bailey, P.A., Ballard, E.J., Hudson, D.A. and Temarel, P. (2000) The effect of non-linear Froude Krylov forces on the seakeeping of monohull vessels using a novel calculation method. In, Third Numerical Towing Tank Symposium (NuTTS 2000), Tjarno, Sweden, 09 - 13 Sep 2000.

Bailey, P.A., Ballard, E.J., Hudson, D.A. and Temarel, P. (2000) Time domain analysis of vessels in waves accounting for fluid memory effects. In, NAV'2000: Thirteenth International Conference on Ships and Shipping Research, Venice, Italy, Sep 2000.

Bailey, P.A., Ballard, E.J. and Temarel, P. (2001) Dynamic behaviour of rigid mono- and multi-hulled vessels in waves, incorporating non-linear excitation. In, Wu, You-Sheng, Zhou, Guo-Jun and Cui, Wei-Cheng (eds.) Proceedings of the 8th International Symposium on Practical Design of Ships and Other Floating Structures. 8th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2001) Oxford, UK, Elsevier, 571-578.

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (1998) The measurement and prediction of fluid actions experienced by a manoeuvring vessel. In, MAN '98: Symposium on Forces Acting on a Manoeuvring Vessel, Val de Reuil, France, 16 - 18 Sep 1998. , 1M-8M.

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (2002) A simple yet rational approach to the panelling of hull surfaces. Transactions of the Royal Institution of Naval Architects, 144, 49-61.

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (1998) Theoretical and experimental techniques for predicting seakeeping and manoeuvring ship characteristics. In, RINA International Conference on Ship Motions and Manoeuvrability, Royal Institute of Naval Architects, London, UK, Feb 1998.

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (1999) Theoretical and experimental validation of the seakeeping characteristics of high speed mono- and multi-hulled vessels. In, FAST '99 - Fifth International Conference on Fast Sea Transportation - Seattle, Washington, August 31 - September 2, 1999. FAST '99: Fifth International Conference on Fast Sea Transportation USA, The Society of Naval Architects and Marine Engineers.

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (1998) Theoretical validation of the hydrodynamics of high speed mono- and multi-hull vessels travelling in a seaway. In, Oosterveld, M.C.W. and Tan, S.G. (eds.) Practical Design of Ships and Mobile Units. Proceedings of the seventh International Symposium on Practical Design of Ships and Mobile Units, The Hague, The Netherlands, September 1998. PRADS '98: Proceedings of the Seventh International Symposium on Practical Design of Ships and Mobile Units Amsterdan, The Netherlands, Elsevier, 567-576. (Developments in Marine Technology 11).

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (2000) Time simulation of ship manoeuvres in waves. In, International Workshop on Ship Manoeuvrability, Hamburg, Germany, Sep 2000.

Bailey, P.A., Hudson, D.A., Price, W.G. and Temarel, P. (1998) A validation of speed and frequency dependence in seakeeping. In, ISC '98: 2nd International Shipbuilding Conference, St. Petersburg, Russia, 24 - 26 Nov 1998.

Ballard, E.J., Du, S.X. and Hudson, D.A. (2001) Motions of mono/multi-hulled vessels in regular waves. In, Proceedings of the Sixth International Conference on Fast Sea Transportation (FAST 2001). Sixth International Conference on Fast Sea Transportation (FAST 2001) London, UK, The Royal Institution of Naval Architects, 219-233.

Banks, J., Webb, A., Spenkuch, T. and Turnock, S.R. (2010) Measurement of dynamic forces experienced by an asymmetric yacht during a gybe, for use within sail simulation software. Procedia Engineering, 2, (2), 2511-2516. (doi:10.1016/j.proeng.2010.04.024 ).

Banks, Joe, Phillips, A.B., Bull, P.W. and Turnock, S.R. (2010) RANS simulations of the multiphase flow around the KCS hullform. In, Gothenburg 2010: A Workshop on CFD in Ship Hydrodynamics, Gothenburg, Sweden, 08 - 10 Dec 2010. 6pp.

Banks, Joe, Phillips, A.B. and Turnock, Stephen (2010) Free surface CFD prediction of components of Ship Resistance for KCS. In, 13th Numerical Towing Tank Symposium, Duisburg, DE, 10 - 12 Oct 2010. 6pp.

Bardet, R.R., Shenoi, R.A. and Boyd, S.W. (2009) The use of life cycle tools towards sustainable thermoplastic composites in ship building. 2008 SAMPE Europe International Conference and Forum, Paris, France, 31 Mar - 02 Apr 2008. Paris, France, SAMPE Europe6pp.

Bardet, Raphaël Régis (2010) A life cycle assessment method for alternative material selection strategies in boat structures. University of Southampton, Engineering and the Environment, Doctoral Thesis , 227pp.

Barik, R.C., Wharton, J.A., Wood, R.J.K. and Stokes, K.R. (2009) Galvanic corrosion performance of high strength copper-nickel alloys in seawater. Journal of Corrosion Science and Engineering (In Press).

Barkley, G.S., Hudson, D.A., Turnock, S.R. and Spinney, D.R.B. (2007) Are daggerboards and trimtabs necessary when sailing upwind with a canting keel. In, Modern Yacht, Southampton, UK, 11 - 12 Oct 2007. London, UK, The Royal Institution of Naval Architects, 123-133.

Basaran, Ismail, Belik, Omer and Temarel, Pandeli (2008) Dynamic behaviour of a container ship using two- and three- dimensional hydroelasticity analyses. In, 27th International Conference on Offshore Mechanics and Arctic Engineering (OMAE 2008), Estoril, Portugal, 15 - 20 Jun 2008.

Batten, W.M.J., Bahaj, A.S., Molland, A.F. and Chaplin, J.R. (2004) Hydrodynamics of marine current turbines. In, Proceedings of the 8th World Renewable Energy Congress (WREC VIII). World Renewable Energy Congress (WREC-VIII) , Elsevier Science.

Batten, W.M.J., Bahaj, A.S., Molland, A.F. and Chaplin, J.R. (2008) The prediction of the hydrodynamic performance of marine current turbines. Renewable Energy, 33, (5), 1085-1096. (doi:10.1016/j.renene.2007.05.043).

Batten, W.M.J., Turnock, S.R., Bressloff, N.W. and Abu-Sharkh, S.M. (2004) Turbulent Taylor-Couette vortex flow between large radius ratio concentric cylinders. Experiments in Fluids, 36, (3), 419-421. (doi:10.1007/s00348-003-0739-1).

Bearman, P.W., Chaplin, J.R., Graham, J.G., Kostense, J.K. and Klopman, G. (1985) The loading on a cylinder in post-critical flow beneath periodic and random waves. In, 4th International Conference on Behaviour of Offshore Structures, Delft, NL, 01 - 05 Jul 1985.

Beaulieu, Claudie, Gharbi, Samir, Ouarda, Taha B. and Seidou, Ousmane (2009) Statistical approach to model the deep draft ships’ squat in the St. Lawrence Waterway. Journal of Waterway, Port, Coastal, and Ocean Engineering, 135, (3), 80-90. (doi:10.1061/(ASCE)WW.1943-5460.0000003).

Beaulieu, Claudie, Gharbi, Samir, Ouarda, Taha B.M.J., Charron, Christian and Aissia, Mohamed Aymen Ben (2012) Improved model of deep-draft ship squat in shallow waterways using stepwise regression trees. Journal of Waterway, Port, Coastal, and Ocean Engineering, 138, (2), 115-121. (doi:10.1061/(ASCE)WW.1943-5460.0000112).

Bennett, S.S., Hudson, D.A. and Temarel, P. (2013) The influence of forward speed on ship motions in abnormal waves: experimental measurements and numerical predictions. Journal of Fluids and Structures, 39, 154-172. (doi:10.1016/j.jfluidstructs.2013.01.006).

Benson, S, Downes, J. and Dow, R.S. (2012) An automated finite element methodology for hull girder progressive collapse analysis. In, 11th International Marine Design Conference (IMDC), Glasgow, GB, 11 - 14 Jun 2012. Department of Naval Architecture and Marine Engineering, University of Strathclyde.

Benson, S., Downes, J. and Dow, R.S (2010) A semi analytical method to predict the ultimate strength and collapse behaviour of orthogonally stiffened panels. In, 11th International Symposium on Practical Design of Ships and Other Floating Structures, Rio de Janeiro, BR, 19 - 24 Sep 2010. COPPE/UFRJ, 1091-1101.

Benson, S., Downes, J. and Dow, R.S. (2009) Collapse modes and ultimate strength characteristics of aluminium grillages in large high speed craft. In, 10th International Conference on Fast Sea Transportation (FAST 2009), Athens, GR, 05 - 09 Oct 2009. University of Athens, 321-332.

Benson, S., Downes, J. and Dow, R.S. (2011) A comparison of numerical methods to predict the progressive collapse of lightweight aluminium vessels. In, 11th International Conference on Fast Sea Transportation (FAST 2011), Hawaii, US, 26 - 29 Sep 2011.

Benson, S., Downes, J. and Dow, R.S. (2012) Compartment level progressive collapse analysis of a lightweight hull girder. In, 6th International ASRANet Conference for Integrating Structural Analysis, Risk and Reliability, Glasgow, GB, 02 - 04 Jul 2012. ASRANet Ltd.

Benson, S., Downes, J. and Dow, R.S. (2009) Ultimate strength characteristics of aluminium plates for high speed vessels. In, Proceedings of Analysis and Design of Marine Structures: 2nd International Conference on Marine Structures (MARSTRUCT). London, GB, Taylor & Francis.

Benson, S., Downes, J. and Dow, R.S. (2011) Ultimate strength characteristics of aluminium plates for high-speed vessels. Ships and Offshore Structures, 6, (1-2), 67-80. (doi:10.1080/17445302.2010.529696).

Benson, Simon, Downes, Jonathan and Dow, Robert S. (2013) A comparison of numerical methods to predict the progressive collapse of lightweight aluminium vessels. Journal of Ship Production and Design, 29, (3), 117-126. (doi:10.5957/JSPD.29.3.120054).

Blake, J.I.R., Shenoi, R.A., Das, P. and Yang, N. (2009) The application of reliability methods in the design of stiffened FRP composite panels for marine vessels. Ships and Offshore Structures, 4, (3), 287-297. (doi:10.1080/17445300903169176).

Blake, J.I.R., Shenoi, R.A., Das, P.K. and Yang, N. (2009) The application of reliability methods in the design of stiffened FRP composite panels for marine vessels and offshore structures. [in special issue: Reliability Analysis in the Design of Structures] Ships and Offshore Structures, 4, (3), 287-297. (doi:10.1080/17445300903169176).

Blake, J.I.R. and Sobey, A.J. (2013) Natural resourcefulness. Ship and Boat International, May/June, 42-48.

Blake, J.I.R. and Wilson, P.A., Wilson, P.A. (ed.) (2001) An analysis of planing craft vertical dynamics in calm water and waves. , 77-90. (doi:10.3940/rina.ft.2001).

Blake, J.I.R. and Wilson, P.A. (2001) A visual experimental technique for planing craft performance. Transactions of Royal Institution of Naval Architects, 143, (285), 393-404.

Blanco, Max (2009) An economically rational selection of submarine hull materials. In, OCEANS '09 IEEE Bremen, Bremen, Germany, 11 - 14 May 2009.

Blanco, Max (2009) Proposal for an AUV refuel station. In, OCEANS 2009 , MTS / IEEE Biloxi - Marine Technology for Our Future: Global and Local Challenges. OCEANS '09 MTS/IEEE Biloxi Piscataway, NJ, USA, Institute of Electrical and Electronics Engineers.

Blanco, Max and Wilson, P.A. (2012) A review of external hydrodynamics with experimental data assessment for low speed ocean flow. Journal of Fluids Engineering, 134, (3), 031203-[12pp]. (doi:10.1115/1.4005821).

Boltryk, Peter J., Hill, Martyn, Keary, Alison C. and White, Paul R. (2004) Surface-fitting for improving the resolution of peak estimation on a sparsely sampled two-dimensional surface with high levels of variance, for an acoustic velocity log. Measurement Science and Technology, 15, (3), 581-591. (doi:10.1088/0957-0233/15/3/010).

Boltryk, Peter J., Hill, Martyn and White, Paul R. (2005) Improving the resolution of peak estimation on a sparsely sampled surface with high variance using Gaussian processes and radial basis functions. Measurement Science and Technology, 16, (4), 955-965. (doi:10.1088/0957-0233/16/4/007).

Bose, N., Hayes, D. and Griffiths, G. (2007) Autonomous underwater vehicle operations: needs of new users. In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, 69-78.

Bowness, D. and Lee, M.M.K. (1994) Crack curvature under the weld toe in a tubular joint: a tree-dimensional numerical investigation. In, Proceedings of the Fourth (1994) International Offshore and Polar Engineering Conference, Osaka, Japan, April 10-15, 1994. Cupertino, US, International Society of Offshore and Polar Engineers, 664-669.

Bowness, D. and Lee, M.M.K. (1998) Guidance on the selection of stress intensity factor solutions for fracture mechanics assessment of cracked offshore tubular joints. In, Choo, Y.S. and van der Vegte, G.J. (eds.) Tubular structures VIII. 8th International Symposium on Tubular Structures Rotterdam, NL, A.A. Balkema, 361-370.

Boyd, S.W., Blake, J.I.R., Shenoi, R.A. and Kapadia, A. (2004) Integrity of hybrid steel-to-composite joints for marine application. Proceedings of the Institution of Mechanical Engineers: Part M, Journal of Engineering for the Maritime Environment, 218, (4), 235-246.

Boyd, S.W., Blake, J.I.R., Shenoi, R.A. and Mawella, J. (2007) Co-cured structural steel-composite joints for deck to superstructure connections. Transactions of the Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 149, (A4), 83-99.

Boyd, S.W., Blake, J.I.R., Shenoi, R.A. and Mawella, J. (2008) Optimisation of steel-composite connections for structural marine applications. Composites Part B: Engineering, 39, (5), 891-906. (doi:10.1016/j.compositesb.2007.08.001).

Boyd, S.W., Day, A.H. and Winkle, I.E. (2005) Geometric considerations for the design of production-friendly high-speed ship hull forms. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 219, (2), 65-76. (doi:10.1243/147509005X10486).

Boyd, S.W., Dulieu-Barton, J.M. and Rumsey, L. (2006) Stress analysis of finger joints in pultruded GRP material. International Journal of Adhesives and Adhesion, 26, (7), 498-510. (doi:10.1016/j.ijadhadh.2005.07.003).

Boyd, S.W., Dulieu-Barton, J.M. and Rumsey, L. (2005) Thermoelastic stress analysis of composite finger joints. In, Dulieu-Barton, J.M. and Quinn, S. (eds.) Advances in Experimental Mechanics IV. 4th International Conference on Advances in Experimental Mechanics Switzerland, Trans Tech, 149-154. (Applied Mechanics and Materials 3-4).

Boyd, S.W., Dulieu-Barton, J.M., Thomsen, O.T. and El-Gazzani, S. (2010) Through thickness stress distributions in pultruded GRP materials. Composite Structures, 92, (3), 662-668. (doi:10.1016/j.compstruct.2009.09.027).

Boyd, S.W., Winkle, I.E. and Day, A.H. (2004) Bonded butt joints in pultruded GRP panels - an experimental study. International Journal of Adhesion and Adhesives, 24, (3), 263-275. (doi:10.1016/j.ijadhadh.2003.11.002).

Boyd, Stephen W., Day, Alexander H. and Winkle, Ian E. (2001) Design considerations for lightweight high-speed ships using planked construction. In, Proceedings of the 6th International Conference on Fast Sea Transportation (FAST 2001). 6th International Conference on Fast Sea Transportation (FAST 2001) London, UK, The Royal Institution of Naval Architects, 231-241.

Boyd, Stephen William (2006) Strength and durability of steel to composite joints for marine application. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 223pp.

Brizzolara, S., Savio, L., Viviani, M., Chen, Y., Temarel, P., Couty, N., Hoflack, S., Diebold, L., Moirod, N. and Souto Iglesias, A. (2009) Comparison of experimental and numerical sloshing loads in partially filled tanks. 2nd International Conference on Marine Structures (MARSTRUCT2009), Lesbon, Portugal, 16 - 18 Mar 2009. London, UK, Taylor & Francis14pp, 13-26.

Brizzolara, S., Savio, L., Viviani, M., Chen, Y.G., Temarel, P., Couty, N., Hoflack, S., Diebold, L., Moirod, N. and Souto Iglesias, A. (2011) Comparison of experimental and numerical sloshing loads in partially filled tanks. Ships and Offshore Structures, 6, (1-2), 15-43. (doi:10.1080/17445302.2010.522372).

Burden, Aaron, Hearn, Grant E., Lloyd, Thomas, Mockler, Simon, Mortola, Lorenzo, Shin, Ie Bum and Smith, Ben (2010) Concept design of a fast sail assisted feeder container ship. In, Marine Unconventional Design Symposium – MUDS 2010, London, GB, 08 Jul 2010. (Submitted).

Burden, Aaron, Hearn, Grant E., Lloyd, Thomas P., Mockler, Simon, Mortola, Lorenzo, Shin, Ie Bum and Smith, Ben (2011) Improved container transshipment utilising low carbon feeder ships. In, International Conference on Technological and Operational Advances for Low Carbon Shipping (LCS2011), Glasgow, GB, 22 - 24 Jun 2011. 10pp.

Burden, Aaron, Lloyd, Thomas, Mockler, Simon, Mortola, Lorenzo, Shin, Ie Bum and Smith, Ben (2010) Concept design of a fast sail assisted feeder container ship. Southampton, GB, University of Southampton, 257pp.

Burgin, N. and Wilson, P. A. (1985) The influence of cable forces on the efficiency of kite devices as a means of alternative propulsion. In, Satchwell, C.J. (ed.) Windship Technology: Proceedings of the International Symposium on Windship Technology Southampton, U.K. April 23-25, 1985. International Symposium on Windship Technology USA, Elsevier, 349-367.

Burgin, N. and Wilson, P.A. (1985) The influence of cable forces on the efficency of kite devices as a means of alternative propulsion. Journal of Wind Engineering and Industrial Aerodynamics, 20, (1-3), 349-367. (doi:10.1016/0167-6105(85)90026-1).

Bélanger, Joseph François Maurice (2009) Study into the use of the GNSS for maritime structure analysis. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 160pp.

C

Cartwright, R.A., Wilson, P.A., Molland, A.F. and Taunton, D.J. (2008) A low wash design for a river patrol craft with minimal environmental impact. International Journal of Maritime Engineering, 150, (A2), 37-56.

Chambers, Lily D., Stokes, Keith R., Walsh, Frank C. and Wood, Robert J.K. (2006) Modern approaches to marine antifouling coatings. Surface and Coatings Technology, 201, (6), 3642-3652. (doi:10.1016/j.surfcoat.2006.08.129).

Champion, T.C. (2003) The deposition of the boat. In, The Dover Boat. UK, English Heritage.

Chandraprabha, S., Molland, A.F., Wilson, P.A. and Ghani, P.A. (2004) An experimental investigation into wash wave and resistance of high speed displacement craft in shallow water. In, Thailand Conference on Mechanical Engineering, Kornkan Province, Thailand, 18 - 20 Oct 2004. 7pp, 1-7.

Chaplin, J.R. (1981) Boundary layer seperation from a cylinder in waves. In, Gisvold, Kaare M. (ed.) Proceedings of International Symposium on Hydrodynamics in Ocean Engineering. The Norwegian Institute of Technology, Trondheim, Norway, August 24-28, 1981. Trondheim, NO, Norwegian Hydrodynamic Laboratories, 645-666.

Chaplin, J.R. (1997) Hydrodynamic damping of cylinders in still water, in currents and in oscillatory flow. In, International Workshop on Environmental Loading on Offshore Structures, Covilha, Portugal,

Chaplin, J.R. (1996) On the mechanics of ringing in offshore structures. In, International Conference in Ocean Engineering (COE'96), 17 Dec 1996 - 20 Dec 1999 .

Chaplin, J.R. and Hayashi, K. (1989) Lift forces on a rigid vertical cylinder in waves. In, Proceedings of the Eighth International Conference on Offshore Mechanics and Arctic Engineering, The Hague, The Netherlands, March 19-23, 1989. New York, US, American Society of Mechanical Engineers, 279-287.

Chaplin, J.R. and Retzler, C.H. (1992) Fluid loading on pontoon sections, London, GB, Health and Safety Executive

Chaplin, J.R., Tickell, R.G. and Anastasiou, K. (1982) The non-linear properties of random wave kinematics. In, Third International Conference on the Behavior of Offshore Structures, Boston, US,

Chen, Y.G. and Price, W.G. (2009) Numerical simulation of liquid sloshing in a partially filled container with inclusion of compressibility effects. Physics of Fluids, 21, (112105), 112105-[16pp]. (doi:10.1063/1.3264835).

Chen, Y.G., Price, W.G. and Temarel, P. (2009) Numerical simulation of liquid sloshing in LNG tanks using a compressible two-fluid flow model. 19th (2009) International Offshore and Polar Engineering Conference (ISOPE-2009), Osaka, Japan, 21 - 26 Jun 2009. Mountain View, USA, The International Society of Offshore and Polar Engineers (ISOPE)10pp, 221-230.

Chen, Zhi-Min (2012) A vortex based panel method for potential flow simulation around a hydrofoil. Journal of Fluids and Structures, 28, 378-391. (doi:10.1016/j.jfluidstructs.2011.10.003).

Chen , Zhi-Min and Price , W.G. (2012) Dissipative free-surface solver for potential flow around hydrofoil distributed with doublets. Applied Mathematics and Mechanics, 33, (11), 1467-1480. (doi:10.1007/s10483-012-1636-9).

Choi, W.J., Xiong, Y.P. and Shenoi, R.A. (2009) Power flow analysis for a floating sandwich raft isolation system using a higher-order theory. Journal of Sound and Vibration, 319, (1-2), 228-246. (doi:10.1016/j.jsv.2008.05.020).

Choi, W.J., Xiong, Y.P. and Shenoi, R.A. (2010) Vibration characteristics of sandwich beams with steel skins and magnetorheological cores. Advances in Structural Engineering, 13, (5), 837-844. (doi:10.1260/1369-4332.13.5.837).

Choi, W.J., Xiong, Y.P. and Shenoi, R.A. (2007) Vibration characteristics of smart sandwich beams embedded with magnetorheological elastomer cores. In, Advancements in Marine Structures: Proceedings of the 1st MARSTRUCT International Conference, Glasgow, UK, 12-14 March 2007. MARSTRUCT 2007: 1st International Conference on Marine Structures: Advancements in Marine Structures London, UK, Taylor & Francis, 421-428.

Clark, S.D., Shenoi, R.A. and Allen, H.G. (1993) Fatigue characteristics of FRP sandwich beams for marine applications. Southampton, UK, University of Southampton, 83pp. (Ship Science Reports, (67) ).

Claughton, A. and Handley, P. (1984) An investigation into the stability of sailing yachts in large breaking waves. Southampton, UK, University of Southampton, 43pp. (Ship Science Reports, (15) ).

Clements, R.J., Wilson, P.A., Lewthwaite, J.C., Molland, A.F. and Ivanov, P. (2005) The potential for the use of a novel craft, PACSCAT (partial air cushion supported catamaran), in inland European waterways. In, Proceedings of FAST 2005. FAST 2005 [Eighth International Conference on Fast Sea Transportation] , The Institute of Marine Engineering, Science and Technology, 1-7.

Coe, T., Xing, J.T. and Shenoi, R.A. (2006) A human body model for dynamic response analysis of an integrated human-seat-controller-high speed marine craft interaction system. 41-th UK Conference on Human Response to Vibration,20-22 September, 2006, Vibration & Motion Group, QinetiQ,

Collins, K.J., Suonpää, A.M. and Mallinson, J.J. (2010) The impacts of anchoring and mooring in seagrass, Studland Bay, Dorset, UK. Underwater Technology, 29, (3), 117-123. (doi:10.3723/ut.29.117).

Collison, R.E., James, M.C., Turnock, S.R. and Hudson, D.A. (2013) Retro-fit solutions for energy efficient shipping. , Universty of Southampton, 63pp. (Ship Science Reports 148).

Cossich, N., Shenoi, R.A. and Wilson, P.A. (1998) Flexural characteristics in in-plane adehesively bonded sandwich structures. In, 4th International Conference on Sandwich Joints, Stockholm, Sweden, 09 - 11 Jun 1998. 14pp, 493-504.

Couser, P., Hudson, D.A., Price, W.G. and Temarel, P. (1995) Prediction of hydrodynamic loads and motions of a high speed catamaran in regular waves. In, Third Symposium on High Speed Marine Vehicles, Naples, Italy, Apr 1995.

Cross-Whiter, J., Wellicome, J.F., Wilson, P.A. and Cheng, X. (1994) Prediction of the manoeuvring forces on a slender ship using slender body theory. Part IV: planar motion experiments and slender body calculations applied to a leander class frigate model. Southampton, GB, University of Southampton, 42pp. (Ship Science Reports, (81) ).

Crossland, P., Wilson, P.A. and Bradburn, J.C. (1993) The free decay of coupled heave and pitch motions of a model frigate. Transactions of the Royal Institution of Naval Architects, 135, 121-132. (doi:10.3940/rina.trans.1993.08).

Crossland, P.C. and Wilson, P.A. (2000) Functional specification of seakeeping suite of computer programs. Haslar, UK, Admiralty Research Establishment, 40pp.

Cutter, Philip Anthony (2008) Predictive Methods for the Fire Resistance of Single Skin and Sandwich Composite Materials. University of Southampton, School of Civil Engineering and the Environment, Doctoral Thesis , 252pp.

D

D'Arcy, T., House, I., Kingsland, P., Spink, R., Yuceulug, M., Hudson, D. and Shenoi, R. (2006) Design of high performance craft from a human factors perspective. In, Symposium on Human Performance at Sea: Influence of Ship Motions on Biomechanics and Fatigue, Panama City, USA, 25 - 26 Apr 2006. USA,

Dadd, George M., Hudson, Dominic A. and Shenoi, R.A. (2010) Comparison of two kite force models with experiment. Journal of Aircraft, 47, (1), 212-224. (doi:10.2514/1.44738).

Dadd, George M., Hudson, Dominic A. and Shenoi, R.A. (2011) Determination of kite forces using three-dimensional flight trajectories for ship propulsion. Renewable Energy, 36, (10), 2667-2678. (doi:10.1016/j.renene.2011.01.027 ).

Date, J. and Turnock, S.R. (2000) CFD estimation of skin friction experienced by a plane moving through water. RINA Transactions Part B, 142, 116-135.

Date, J.C. and Turnock, S.R. (1999) A study into the techniques needed to accurately predict skin friction using RANS solvers with validation against Froude's historical flat plate experimental data. Southampton, UK, University of Southampton, 62pp. (Ship Science Reports, (114) ).

Dawood, T.A., Shenoi, R.A. and Sahin, M. (2007) A procedure to embed fibre Bragg Grating strain sensors into GFRP sandwich structures. Composites Part A: Applied Science and Manufacturing, 38, 217-226.

Dedes, E, Hudson, D.A. and Turnock, S.R. (2012) Assessing the potential of hybrid energy technology to reduce exhaust emissions from global shipping. Energy Policy, 40, 204-218. (doi:10.1016/j.enpol.2011.09.046).

Dedes, E, Hudson, D.A. and Turnock, S.R. (2012) Design and simulation of hybrid propulsion systems for reduction of fuel oil consumption and shipping emissions. In, 1st International MARINELIVE Conference on 'All Electric Ship', Athens, GR, 04 - 05 Jun 2012. 12pp.

Dedes, E, Hudson, D.A. and Turnock, S.R. (2010) Development of hybrid diesel - electric propulsion system for ships. In, 1st Marine Technology Postgraduate Conference, Newcastle upon Tyne, GB, 10 - 11 Jun 2010.

Dedes, E, Hudson, Dominic A. and Turnock, Stephen R. (2010) Design of hybrid diesel-electric energy storage systems to maximize overall ship propulsive efficiency. In, PRADS 2010: 11th International Symposium on Practical Design of Ships and Other Floating Structures, Rio de Janeiro, BR, 19 - 24 Sep 2010. 11pp.

Dedes, E, Turnock, S.R., Hudson, D.A. and Hirdaris, S. (2011) Possible power train concepts for nuclear powered merchant ships. In, LCS 2011: International Conference on Technologies, Operations, Logistics and Modelling for Low Carbon Shipping , Glasgow City, GB, 22 - 24 Jun 2011. , 261-274.

Dedes, E., Hudson, D.A. and Turnock, S.R. (2012) Technical feasibility of hybrid propulsion systems to reduce exhaust emissions of bulk carriers. The International Journal of Maritime Engineering, 154 (doi:10.3940/rina.ijme.2012.a4.207tn).

Denchfield, S., Winden, B., Brooks, Christopher James, Turnock, S.R., Hudson, D.A., Forrester, Alexander I.J. and Taunton, D.J. (2011) Wireless sensor network for determining boat motions and hydroelastic responses. In, Second International Conference on Advanced Model Measurement Technology for EU Maritime Industry (AMT' 11), Newcastle upon Tyne, GB, 14pp.

Denchfield, S.S., Hudson, D.A., Temarel, P., Bateman, W. and Hirdaris, S.E. (2009) Evaluation of rogue wave induced loads using 2D hydroelasticity analysis. In, Proceedings of the 5th International Conference on Hydroelasticity in Marine Technology. 5th International Conference on Hydroelasticity in Marine Technology Southampton, UK, University of Southampton, 347-360.

Denchfield, S.S., Murphy, A.J. and Temarel, P. (2009) A deep water beach for laboratory generation of abnormal waves. In, Olagon, Michel and Prevosto, Marc (eds.) Rogue Waves 2008. Proceedings of a Workshop organized by Ifremer and held in Brest, France 13-14-15 October 2008 within the Brest Sea Tech Week 2008. Rogue Waves 2008 Issy-les-Moulineaux, France, Ifremer, 219-229.

Denchfield, S.S., Wood, C.D., Hudson, D.A., Tan, M. and Temarel, P. (2010) Comparisons between CFD predictions and experiments for rogue wave-ship interactions. In, PRADS 2010: 11th International Symposium on Practical Design of Ships and Other Floating Structures, Rio de Janeiro, BR, 19 - 24 Sep 2010. 7pp.

Donohew, B.E. (2002) Effect of frequency of 100% roll compensation on motion sickness. In, 37th United Kingdom Conference on Human Responses to Vibration, Loughborough, UK, 18 - 20 Sep 2002. UK, , 282-293.

Douglas, J.D. and Wilson, P.A. (1985) The use of Decca for position fixing during ship manoeuvring trials. Seaways, 2, 5-7.

Downes, J., Collette, M. and Incecik, A. (2006) Analysis of hull girder strength in the damaged condition. In, 3rd ASRANet International Colloquium , 10 - 12 Jul 2006. Glasgow, GB,

Downes, J., Ham, W.L. and Dow, R.S. (2013) Assessment of the residual strength of a lightweight naval vessel. In, The 12th International Symposium on Practical Design of Ships and Other Floating Structures, Changwon City, Korea, Republic of, KR, 20 - 25 Oct 2013. Society of Naval Architects of Korea.

Downes, J., Moore, C.S., Incecik, A., Stumpf, E. and McGregor, J. (2007) A method for the quantitative assessment of performance of alternative designs in the accidental condition. In, 10th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS) 2007, Houston, US,

Downes, J. and Pu, Y. (2002) Reliability analysis of the ultimate hull girder strength of high speed craft. In, 1st ASRANet International Colloquium, Glasgow, GB,

Downes, Jonathan and Pu, Y. (2005) Reliability-based sensitivity analysis of ships. Proceedings of the Institution of Mechanical Engineers, Part M: : Journal of Engineering for the Maritime Environment, 219, (1), 11-23. (doi:10.1243/147509005X10468).

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2001) An alternative expression of the restoring coefficient matrix associated with a moving flexible structure. In, China Ship Scientific Research Center 50th Jubilee Workshop, Wuxi, China, Sep 2001.

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (1999) Comparison of numerical evaluation techniques for the hydrodynamic analysis of a ship travelling in waves. Transactions of Royal Institution of Naval Architects (RINA), 141, 236-258.

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2009) Implicit expresions of static and incident wave pressures over the instantaneous wetted surface of ships. [In Fluid-Structure Interactions: special issue in honour of Professor W. Geraint Price. Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment, 223, (3), 239-256. (doi:10.1243/14750902JEME162).

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2004) An improved matching method to solve the diffraction—radiation problem of a ship moving in waves. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 218, (3), 139-152. (doi:10.1243/1475090041737930).

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2003) An improved matching method to solve the radiation problem of a ship moving in waves. In, 8th International Conference on Numerical Ship Hydrodynamics, Busan, Korea, 22 - 25 Sep 2003.

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2002) An investigation into the effects of irregular frequencies and the waterline integral in the hydrodynamic analysis of vessels with forward speed. In, Third International Shipbuilding Conference (ISC 2002), St.Petersburg, Russia, 08 - 10 Oct 2002. , 234.

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2001) Methods to reduce the effects of irregular frequencies in hydrodynamic analysis of vessels with forward speed. In, Wu, You-Sheng, Zhou, Guo-Jun and Cui, Wei-Cheng (eds.) Practical design of ships and other floating structures. 8th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS) , Elsevier, 847-855.

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2004) Theoretical predictions of steady-state hydrodynamic characteristics of a high-speed vessel with transom stern. Royal Institution of Naval Architects Transactions A: International Journal of Maritime Engineering, 146, (4), 1-15.

Du, S.X., Hudson, D.A., Price, W.G. and Temarel, P. (2000) A validation study on mathematical models of speed and frequency dependence in seakeeping. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 214, (1), 181-202. (doi:10.1243/0954406001522903).

Du, Shuang Xing, Hudson, Dominic A., Price, W.Geraint and Temarel, Pandeli (2012) An investigation into the hydrodynamic analysis of vessels with a zero or forward speed. [in special issue: Hydroelasticity Theories and Applications] Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment, 226, (2), 83-102. (doi:10.1177/1475090211432078).

Du, Shuangxing, Hudson, Dominic A., Price, Geraint W., Temarel, Pandeli, Chen, Ruizhang and Wu, Yousheng (2008) Wavelet analysis of loads on a flexible ship model traveling in large-amplitude waves. Journal of Ship Research, 52, (4), 249-262.

Duan, W.Y., Hudson, D.A. and Price, W.G. (2000) Theoretical prediction of the motions of fast displacement vessels in long-crested head-seas. In, HPMV'2000: Third International Conference on High Performance Marine Vehicles, Shanghai, China, Apr 2000.

Duan, W.Y. and Price, W.G. (2002) A numerical method to solve the m-terms of a submerged body with forward speed. International Journal for Numerical Methods in Fluids, 40, (5), 655-667. (doi:10.1002/fld.367).

de Ruyter, Marcus J.M. (2009) Two-dimensional cut plan optimization for cutter suction dredgers. University of Southampton, School of Civil Engineering and the Environment, Doctoral Thesis , 197pp.

E

Earl, J.S. and Shenoi, R.A. (2004) Hygrothermal ageing effects on FRP laminate and structural foam materials. Composites Part A: Applied Science and Manufacturing, 35, (11), 1237-1247. (doi:10.1016/j.compositesa.2004.04.007).

Edwards, Howell G.M., Nikhassan, Nik F., Farwell, Dennis W., Garside, Paul and Wyeth, Paul (2006) Raman spectroscopic analysis of a unique linen artefact: the HMS Victory Trafalgar sail. Journal of Raman Spectroscopy, 37, (10), 1193-1200. (doi:10.1002/jrs.1609).

Eksik, Ömer, Shenoi, R. Ajit, Moy, Stuart S.J. and Jeong, Han Koo (2007) Experiments on top hat stiffened panels of FRP boat structures. Marine Technology, 44, (1), 1-15.

Eksik, Ömer, Shenoi, R. Ajit, Moy, Stuart S.J. and Jeong, Han Koo (2007) Finite element analysis of top hat stiffened panels of FRP boat structures. Marine Technology, 44, (1), 16-26.

Essersi, O., Tarfaoui, M., Boyd, S.W., Meraghni, F. and Shenoi, R.A. (2009) Dynamic study of adhesively bonded double lap composite joints. In, 17th International Conference on Composite Materials (ICCM-17), Edinburgh, UK, 27 - 31 Jul 2009.

Ezkeera, A., Wilson, P.A., Mayora, K. and Ruano-López, J.M. (2008) A mathematical model for the motion analysis of embedded straight microcantilevers under a pressure driven flow. Journal of Micromechanics and Microengineering, 18, (8), 1-12. (doi:10.1088/0960-1317/18/9/095011).

F

Fallows, C.D. (2005) AUTOSUB propulsion system investigation: characterisation of the force measurement system. Southampton, UK, University of Southampton, 28pp. (Ship Science Reports, 133).

Fallows, C.D. (2005) AUTOSUB propulsion system investigation: laboratory data pre-processing. Southampton, UK, University of Southampton, 10pp. (Ship Science Reports, 134).

Fallows, C.D. (2005) AUTOSUB propulsion system investigation: supplementary information. Southampton, UK, University of Southampton, 123pp. (Ship Science Reports, 135).

Fallows, C.D. (2005) AUTOSUB propulsion system investigation: theory of experiment design. Southampton, UK, University of Southampton, 20pp. (Ship Science Reports, 132).

Fan, Y.T. and Wilson, P.A. (2004) Time domain non linear strip theory for ship motions. Royal Institution of Naval Architects Transactions A: International Journal of Maritime Engineering, 146, (3), 33-47. (doi:10.3940/rina.ijme.2004.a3.3404).

Feng, Z. and Allen, R. (2004) Evaluation of the effects of the communication cable on the dynamics of an underwater flight vehicle. Ocean Engineering, 31, (8-9), 1019-1035. (doi:10.1016/j.oceaneng.2003.11.001).

Findlay, M. and Turnock, S.R. (2010) Mechanics of a rowing stroke: surge speed variations of a single scull. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 224, (1), 89-100. (doi:10.1243/17543371JSET49).

Findlay, M.W. and Turnock, S.R. (2008) Investigating sailing styles and boat set-up on the performance of a hydrofoiling Moth dinghy. In, 20th International HISWA Symposium on Yacht Design and Yacht Construction, Amsterdam, The Netherlands, 17 - 18 Nov 2008. Den Haag, The Netherlands, Koninklijke Bibliotheek16pp.

Findlay, M.W. and Turnock, S.R. (2008) Investigation of the effects of hydrofoil set-up on the performance of an international moth dinghy using a dynamic VPP. In, Innovation in High Performance Sailing Yachts, Lorient, France, 29 - 30 May 2008. London, UK, Royal Institution of Naval Architects, 43-56.

Findlay, Matt and Turnock, Stephen (2008) Rowing strategies in Cambridge bumps races. In, Estivalet, Margaret and Brisson, Pierre (eds.) The Engineering of Sport 7. 7th ISEA Conference 2007 , Springer, 53-64.

Flay, R.G.J. (1992) Wind tunnel tests on a 1/16th scale laser model. Southampton, UK, University of Southampton, 126pp. (Ship Science Reports, (55) ).

Forestier, J-M., Holmes, B., Barrett, S. and Lewis, A.W. (2007) Value and validation of small scale physical model tests of floating wave energy converters. In, Proceedings of the 7th European Wave and Tidal Energy Conference (EWTEC 2007). 7th European Wave and Tidal Energy Conference (EWTEC 2007) Porto, Portugal, European Wave and Tidal Energy Conference.

Franklin, M., Shenoi, R.A., Wilson, P.A., Turnock, S.R. and Hudson, D.A. (2011) Interdisciplinary research collegium in advanced maritime systems design. In, RINA International Conference on the Education and Professional Development of Engineers in the Maritime Industry, 07 - 08 Dec 2011. Newcastle upon Tyne, GB,

Fujiwara, Toshifumi, Hearn, Grant E., Kitamura, Fumitoshi and Ueno, Michio (2005) Sail–sail and sail–hull interaction effects of hybrid-sail assisted bulk carrier. Journal of Marine Science and Technology, 10, (2), 82-95. (doi:10.1007/s00773-005-0191-4).

Fujiwara, Toshifumi, Hearn, Grant E., Kitamura, Fumitoshi, Ueno, Michio and Miniami, Yoshimasa (2005) Steady sailing performance of a hybrid-sail assisted bulk carrier. Journal of Marine Science and Technology, 10, (3), 131-146. (doi:10.1007/s00773-004-0189-3).

Furlong, M.E. and Brito, M.P. (2009) Reliability Case Notes No. 4: Autosub6000 and Autosub3 actuator potentiometer failure analysis and testing report. Southampton, UK, National Oceanography Centre Southampton, 30pp. (National Oceanography Centre Southampton Research and Consultancy Report, 58).

Furlong, M.E., Hearn, G.E., Veres, S.M. and Rogers, E. (2003) Nonlinear system identification tools applied to the modeling of submarine dynamics. In, Roberts, Geoff, Sutton, Robert and Allen, R. (eds.) Guidance and Control of Underwater Vehicles 2003. 1st IFAC Workshop on Guidance and Control of Underwater Vehicles (GCUV 2003) Oxford, GB, Elsevier, 53-58. (Ifac Series).

Furlong, M.E., McPhail, Stephen D. and Pebody, Miles (2009) A New Collision Avoidance System for the Autosub6000 Autonomous Underwater Vehicle. In, Proceedings of the International Symposium on Unmanned Untethered Submersible Technology (UUST 2009), Durham, New Hampshire, 23-26 August 2009. UUST 09 Durham NH, USA, Autonomous Undersea Systems Institute (AUSI), [12p].

Furlong, Maaten E., McPhail, Stephen D. and Stevenson, Peter (2007) A concept design for an ultra-long-range survey class AUV. In, Oceans '07, Aberdeen, Scotland, 19 - 21 Jun 2007. 6pp.

G

Gazeley, I. and Rice, P. (1992) Output and employment during the interwar period: the case of the ship-building industry. Southampton, UK, University of Southampton (Discussion Papers in Economics and Econometrics 9224).

Gazeley, I. and Rice, P.G. (1996) Wages and employment in Britain between the wars: quarterly evidence from the shipbuilding industry. Southampton, UK, University of Southampton (Discussion Papers in Economics and Econometrics, (9605) ).

Gedge, Michael, Voon, Lawrence, Glynne-Jones, Peter and Hill, Martyn (2011) The use of ultrasonic waves to minimise biofouling in oceanographic microsensors. In, International Congress on Ultrasonics (ICU 2011), Gdańsk, PL, 05 - 08 Sep 2011.

German, C., Tyler, P. and Griffiths, G. (2003) The maiden voyage of UK ROV "Isis". Ocean Challenge, 12, (3), 16-18.

Ghani, M.P.A. and Wilson, P.A. (2002) Wake wash from high speed displacement craft. In, APHydro 2002: Asia Pacific Workshop on Maritime Hydrodynamics in Asia Pacific Maritime Congress - 90th Anniversary of KSNAJ, Tokyo, Japan, 21 - 23 May 2002. Tokyo, Japan, , 37-43.

Gibson, T.D. and Wilson, P.A. (2008) Operating a remotely controlled yacht at very large distances. In, ATMA - ASSS 2008 International Autonomous Surface Ship Symposium, Paris, France, 02 - 04 Jun 2008. Paris, France, 12pp, 30-36.

Gittins, R.P. and Williams, T.M., Royal Instituion of Naval Architects (1992) Extending endurance with Ras: mix, tactics and design trade-offs. In, Warship 92: Affordable Warships - Extending and Enhancing Maritime Capabilities. Proceedings. Warship 1992: Affordable Warships - extending and enhancing maritime capabilities London, UK, Royal Institution of Naval Architects.

Godderidge, B, Phillips, A.B., Lewis, S.G., Turnock, S.R., Hudson, D.A. and Tan, M. (2008) The simulation of free surface flows with Computational Fluid Dynamics. In, 2008 ANSYS UK User Conference: Inspiring Engineering, Oxford, UK, 29 - 30 Oct 2008. UK, ANSYS13pp.

Godderidge, B., Tan, M., Earl, C. and Turnock, S.R. (2006) Multiphase CFD modelling of a lateral sloshing tank. In, 10th Numerical Towing Tank Symposium, Le Croisic, France, 01 - 03 Oct 2006. Nantes, France, Ecole Centrale de Nantes, 59-64.

Godderidge, B., Tan, M., Turnock, S.R. and Earl, C. (2006) A verification and validation study of the application of computational fluid dynamics to the modelling of lateral sloshing. Southampton, UK, University of Southampton, 158pp. (Ship Science Reports, (140) ).

Godderidge, B., Tan, M.Y., Earl, C. and Turnock, S.R. (2007) Grid resolution for the simulation of sloshing using CFD. In, 10th Numerical Towing Tank Symposium (NuTTS'07), Hamburg, Germany, 23 - 25 Sep 2007. Hamburg, Germany, 6pp.

Godderidge, B. and Turnock, S.R. (2009) A rapid sloshing model for liquefied natural gas carriers. Hydrocarbon World, 4, (2), 40-46.

Godderidge, B., Turnock, S.R., Cowlan, N. and Tan, M. (2009) ISOPE 2009 Sloshing Comparative Study: simulation of lateral sloshing with multiphase CFD. In, Proceedings of the Nineteenth (2009) International Offshore and Polar Engineering Conference. Nineteenth (2009) International Offshore and Polar Engineering Conference (ISOPE-2009 Osaka) USA, International Society of Offshore and Polar Engineers, 239-246.

Godderidge, B., Turnock, S.R., Tan, M and Earl, C. (2008) The effect of an internal pump tower on fluid sloshing in a rectangular container. In, Marine CFD 2008, Southampton, UK, 26 - 27 Mar 2008. London, UK, Royal Institution of Naval Architects, 53-64.

Godderidge, B., Turnock, S.R., Tan, M. and Earl, C (2009) A simplified pump tower approach for realistic CFD simulation of sloshing in LNG tanks. Transactions of the Royal Institution of Naval Architects Part A3: International Journal of Maritime Engineering, 151, (3), Summer Issue, 1-11.

Godderidge, B., Turnock, Stephen R. and Tan, M. (2012) A rapid method for the simulation of sloshing using a mathematical model based on the pendulum equation. Computers and Fluids, 57, 1-10. (doi:10.1016/j.compfluid.2011.12.018).

Godderidge, Bernard, Tan, Mingyi, Earl, Chris and Turnock, Stephen, ISOPE (2007) Boundary layer resolution for modeling of a sloshing liquid. In, Chung, Jin S., Hong, Seok Won, Nagata, Shuichi, Antonio, J.N.A. and Koterayama, Wataru (eds.) Proceedings of The Seventeenth (2007) International Offshore and Polar Engineering Conference. Seventeenth (2007) International Offshore and Polar Engineering Conference USA, International Society of Offshore and Polar Engineers, 1905-1911.

Godderidge, Bernhard (2009) A phenomenological rapid sloshing model for use as an operator guidance system on liquefied natural gas carriers. Doctoral Thesis , 213pp.

Godderidge, Bernhard, Turnock, Stephen, Earl, Chris and Tan, Mingyi (2009) The effect of fluid compressibility on the simulation of sloshing impacts. Ocean Engineering, 36, (8), 578-587. (doi:10.1016/j.oceaneng.2009.02.004).

Godderidge, Bernhard, Turnock, Stephen, Earl, Chris and Tan, Mingyi (2008) Identification of dangerous LNG sloshing using a rapid sloshing model validated with computational fluid dynamics. In, Chung, J.S., Grilli, S.T., Naito, S. and Ma, Q. (eds.) The Proceedings of the Eighteenth (2008) international Offshore and Polar engineering conference. 18th International Offshore and Polar Engineering Conference (ISOPE 2008) , International Society of Offshore and Polar Engineers (ISOPE), 170-177.

Godderidge, Bernhard, Turnock, Stephen, Tan, Mingyi and Earl, Chris (2009) An investigation of multiphase CFD modelling of a lateral sloshing tank. Computers & Fluids, 38, (2), 183-193. (doi:10.1016/j.compfluid.2007.11.007).

Goodes, L.R., Wharton, J.A., Dennington, S.P. and Stokes, K.R. (2014) Estimation of organic biocide leaching rate using a modified cavity jump diffusion model. Progress in Organic Coatings, 77, (9), 1499-1505. (doi:10.1016/j.porgcoat.2014.04.016).

Grant, D.S. and Wilson, P.A. (2005) The development of a design tool for rigid inflatable boats. In, Proceedings of the 7th Symposium on High Speed Marine Vehicles [HSMV05]. 7th Symposium on High Speed Marine Vehicles [HSMV05] Naples, Italy, Royal Institution of Naval Architects.

Gravina, Jonathan, Blake, James I.R., Shenoi, R. Ajit, Turnock, Stephen R. and Hirdaris, Spyros (2013) Concepts for a modular nuclear powered containership. In, 7th International Conference on Ships and Shipping Research, Naples, Italy, 10pp.

Grewal, S. and Lee, M. (2004) Strength of minimum structure platforms under ship impact. Journal of Offshore Mechanics and Arctic Engineering - Transactions of the ASME, 126, (4), 368-375. (doi:10.1115/1.1839883).

Griffiths, G. (2005) Autosub under ice. Ingenia, (22), 30-32.

Griffiths, G. (2003) Moorings recovery using the Isis deep submergence ROV. Challenger Wave, (March 2003), 4-5.

Griffiths, G. (2007) RRS James Cook Cruise JC009T, 01 May - 11 May 2007. Trials of the Isis Remotely Operated Vehicle. Southampton, UK, National Oceanography Centre Southampton, 42pp. (National Oceanography Centre Southampton Cruise Report, 18).

Griffiths, G. (2000) Technology needs for AUVs: where do we go from here? International Ocean Systems, 4, (3), 8-15.

Griffiths, G., Bose, N., Ferguson, J. and Blidberg, D.R. (2007) Insurance for autonomous underwater vehicles. Underwater Technology, 27, (2), 43-48.

Griffiths, G., Enoch, P. and Millard, N.W. (2001) On the radiated noise of the Autosub autonomous underwater vehicle. ICES Journal of Marine Science, 58, (6), 1195-2000. (doi:10.1006/jmsc.2001.1120).

Griffiths, G., Jamieson, J., Mitchell, S. and Rutherford, K. (2004) Energy storage for long endurance AUVs. In, Advances in Technology for Underwater Vehicles, Conference Proceedings, 16-17 March 2004. Advances in Technology for Underwater Vehicles London, UK, The Institute of Marine Engineering, Science and Technology, 8-16.

Griffiths, G., Jones, C., Ferguson, J. and Bose, N. (2007) Undersea gliders. Journal of Ocean Technology, 2, (2), 64-75.

Griffiths, G., Knap, A.H., Dickey, T. and Avvex 98 Team, (2000) The autonomous vehicle validation experiment. Sea Technology, 41, (2), 35-45.

Griffiths, G., Millard, N.W., McPhail, S.D., Stevenson, P. and Challenor, P.G. (2003) On the reliability of the Autosub autonomous underwater vehicle. Underwater Technology: International Journal of the Society for Underwater Technology, 25, (4), 175-184.

Griffiths, G., Millard, N.W. and Rogers, R. (2002) Logistics, risks and procedures concerning autonomous underwater vehicles. In, Griffiths, Gwyn (ed.) Technology and Applications of Autonomous Underwater Vehicles. London, UK, Taylor & Francis, 279-293.

Griffiths, G., Reece, D., Blackmore, P., Lain, M., Mitchell, S. and Jamieson, J. (2005) Modeling hybrid energy systems for use in AUVs. In, Proceedings of the 14th Unmanned Untethered Submersible Technology (UUST05). 14th International Symposium on Unmanned Untethered Submersible Technology (UUST05) Lee, USA, Autonomous Underwater Systems Institute, 10pp.

Griffiths, G. and Trembanis, A. (2007) Towards a risk management process for automous underwater vehicles. In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, 103-118.

Griffiths, Gwyn (2002) Rendezvous at nightfall: the voyages of ocean robot explorers. Environmental Scientist, 11, (5), 4-5.

Griffiths, Gwyn (2004) Science directions: AUVs in ocean research and monitoring. International Ocean Systems, 8, (1), 6-9.

Griffiths, Gwyn and Edwards, Ian (2003) AUVs: designing and operating next generation vehicles. In, Dahlin, H., Flemming, N.C., Nittis, K. and Petersson, S.E. (eds.) Building the European Capacity in Operational Oceanography: Proceedings of the Third International Conference on EuroGOOS, 3-6 December 2002, Athens, Greece. 3rd International Conference on EuroGOOS Amsterdam, The Netherlands, Elsevier, 229-236. (Elsevier Oceanography Series 69).

Griffiths, Gwyn, Merckelbach, Lucas and Smeed, David (2007) On the performance of three deep-diving underwater gliders. In, OCEANS 2007 - Europe. Oceans 2007 - Europe Richardson, USA, Institute of Electrical and Electronics Engineers, 1-5. (doi:10.1109/OCEANSE.2007.4302200).

Gruncell, Brian (2014) Superhydrophobic surfaces and their potential application to hydrodynamic drag reduction. University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 270pp.

Guermond, J.-L., Forestier, J.-M. and Dupont, M. (1986) A computer aided design procedure for marine propellers. In, Keramidas, G.A. and Murthy, T.K.S. (eds.) CADMO 86. Proceedings of the International Conference on Computer Aided Design and Operation in the Marine and Offshore Industries, Washington DC, September 1986. Berlin, DE, Springer, 285-294. (Springer Series in Information Sciences).

Gutowski, Martin, Bull, Jonathan M., Dix, Justin K., Henstock, Timothy J., Hogarth, Peter, Hillier, Tom, Leighton, Timothy G. and White, Paul R. (2008) 3D high-resolution acoustic imaging of the sub-seabed. Applied Acoustics, 69, (3), 262-272. (doi:10.1016/j.apacoust.2006.08.010).

H

Halliwell, N.A. (1975) A laser-anemometer for use in ship research. Southampton, GB, University of Southampton, 21pp. (Ship Science Reports).

Halliwell, N.A. (1977) Laser-doppler anemometry in ship hydrodynamics. Southampton, UK, University of Southampton, 43pp. (Ship Science Reports, (4/77) ).

Halswell, P., Wilson, P. A., Taunton, D. J. and Austen, S. (2011) Design and performance of inflatable boats: flexibility and environmental considerations. In, High Speed Marine Vehicles (HSMV'11), Napoli, IT, 10pp.

Harding, R.D., Hirdaris, S.E., Miao, Shihua and Temarel, P. (2006) Use of hydroelasticity analysis in design. In, Hydroelasticity in Marine Technology, 2006, Wuxi, China, 10 - 14 Sep 2006. Beijing, China, National Defence Industry Press12pp, 1-12. (Submitted).

Harris, C.J., Hong, X. and Wilson, P.A. (1999) An intelligent guidance and control system for ship obstacle avoidance. In, Proceedings CIMA'99. CIMA'99 International Congress on Computational Intelligence: Methods and Applications , Natural and Artificial Intelligence Systems Organisation, 234-240.

Hashim, S., Berggreen, C., Tsouvalis, N., McGeorge, D., Chirica, I., Moore, P., Boyd, S.W., Nisar, J., Anyfantis, K., Misirlis, K., Juin, E., Hayman, B., Dow, R. and Orsolini, A. (2011) Fabrication, testing and analysis of steel/composite DLS adhesive joints. Ships and Offshore Structures, 6, (1-2), 115-126. (doi:10.1080/17445302.2010.522019).

Haward, B.H., Lewis, C.H. and Griffin, M.J. (2000) Crew response to motions of an offshore oil production and storage vessel. In, Human Factors in Ship Design and Operation Conference, London, UK, 27 - 29 Sep 2000. 15pp.

Hayman, B., Berggreen, C., Lundsgaard-Larsen, C., Delarche, A., Toftegaard, H., Dow, R.S., Downes, J., Misirlis, K., Tsouvalis, N. and Douka, C. (2011) Studies of the buckling of composite plates in compression. Ships and Offshore Structures, 6, (1-2), 81-92. (doi:10.1080/17445302.2010.528283).

Hearn, G.E., Lafforgue, D., Perdriset, E. and Saydan, D. (2008) The hydrodynamic and dynamic motion analysis of a damaged ship. Transactions of the Royal Institution of Naval Architects. Part A, International Journal of Maritime Engineering, 150, (A2), 1-24.

Hearn, G.E., Veldhuis, I.J.S., Veer, R. van't and Steenbergen, R.J. (2001) Conceptual design investigation of a very high speed transpacific container vessel. In, Proceedings of FAST 2001. 6th International Conference on Fast Sea Transportation (FAST 2001) London, UK, The Royal Institution of Naval Architects, 81-107.

Hirdaris, S.E., Bakkers, N., White, N. and Temarel, P. (2007) Feasibility study for the estimation of service factors of a Great Lakes bulk carrier incorporating the effects of springing and whipping. In, International Conference on Computational Methods in Marine Engineering (MARINE 2007), Barcelona, Spain, 05 - 07 Jun 2007.

Hirdaris, S.E., Miao, S.H., Price, W.G. and Temarel, P. (2006) The influence of structural modelling on the dynamic behaviour of a bulker in waves. In, Fourth International Conference on Hydroelasticity in Marine Technology, Wuxi, China, 10 - 14 Sep 2006. Beijing, China, National Defence Industry Press, 25-34.

Hirdaris, S.E., Miao, S.H. and Temarel, P. (2009) The effect of structural discontinuity on antisymmetric response of a container ship. In, 5th International Conference on Hydroelasticity in Marine Technology, Southampton, UK, 08 - 10 Sep 2009. Southampton, UK, University of Southampton12pp, 57-68.

Hirdaris, S.E., Price, W.G. and Temarel, P. (2000) Hydroelastic analysis of a bulk carrier. In, 13th International Conference on Ship and Shipping Research (NAV 2000), Venice, Italy, 19 - 22 Sep 2000. , 1-12.

Hirdaris, S.E., Price, W.G. and Temarel, P. (2001) Symmetric and antisymmetric hydroelastic analysis of a bulker in waves. In, Proceedings of the 8th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2001), Shanghai, China, 16 - 21 Sep 2001. , 903-910.

Hirdaris, S.E., Price, W.G. and Temarel, P. (2003) Two- and three-dimensional hydroelastic modelling of a bulker in regular waves. Marine Structures, 16, (8), 627-658. (doi:10.1016/j.marstruc.2004.01.005).

Hirdaris, S.E. and Temarel, P. (2009) Hydroelasticity of ships: recent advances and future trends. Journal of Engineering for the Maritime Environment, 223, (3), 305-330. (doi:10.1243/14750902JEME160).

Hirdaris, Spyridon E., Bakkers, Norbert, White, Nigel and Temarel, Pandeli (2009) Service factor assessment of a great lakes bulk carrier incorporating the effects of hydroelasticity. Marine Technology, 46, (2), 116-121.

Hito, Braga de Moraes and Wilson, P.A. (2014) Evaluation of methods for estimating power to the most common form of hulls in the Amazon. Martec 2014 (Submitted).

Hong, X, Harris, C.J. and Wilson, P.A. (1999) Autonomous ship collision free trajectory navigation and control algorithm. ETFA'99, 2, 923-929. (doi:10.1109/ETFA.1999.813090).

Hong, X., Harris, C.J. and Wilson, P.A. (1999) An intelligent guidance and control system for ship obstacle avoidance. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 213, (4), 311-320. (doi:10.1243/0959651991540179).

Hong, X., Harris, C.J. and Wilson, P.A. (1999) Neurofuzzy state identification using prefiltering. Control Theory and Applications, IEE Proceedings, 146, (2), 234-240. (doi: 10.1049/ip-cta:19990121).

Hotchkiss, Anthony (1977) Low frequency damping of a ship's mast. University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 259pp.

Hou, Y. and Allen, R. (2008) Behaviour-based circle formation control for a team of cooperative Unmanned Underwater Vehicles. At Proceedings of Biological Approaches for Engineering, Southampton, UK, 17 - 19 Mar 2008. Southampton, UK, University of Southampton, 147-150.

Hou, Yan and Allen, Robert (2008) Intelligent behaviour-based team UUVs cooperation and navigation in a water flow environment. Ocean Engineering, 35, (3-4), 400-416. (doi:10.1016/j.oceaneng.2007.09.005).

Hu, B., Xing, J.T. and Shenoi, R.A. (2007) Effects of changes in curvatures on the natural characteristics of curved structures. In, MARSTRUCT 2007: 1st International Conference on Marine Structures: Advancements in Marine Structures, Glasgow, United Kingdom, 12 - 14 Mar 2007. London, UK, Taylor & Francis9pp, 177-185.

Hudson, D.A., Price, W.G. and Temarel, P. (1995) Seakeeping performance of high speed displacement craft. In, FAST '95: Third International Conference on Fast Sea Transportation, Lubeck-Travemunde, Germany, Sep 1995. , 877-892.

Hudson, D.A., Turnock, S.R. and Lewis, S.G. (2007) Predicting motions of high-speed rigid inflatable boats: improved wedge impact prediction. In, The Ninth International Conference on Fast Sea Transportation (FAST2007), Shanghai, China, 23 - 27 Sep 2007. Shanghai, China, , 377-383.

Hudson, D.A. and Wilson, P.A. (1997) Prediction of the motions of an autonomous semi-submersible vehicle. Southampton, UK, University of Southampton, 32pp. (Ship Science Reports, (103) ).

Hudson, Dominic A. (2010) High speed catamaran hydrodynamics and human factors of small, high speed craft. In, Seminar on High Speed Ships, Osaka, Japan,

Hudson, Dominic A. (2012) Ship design for energy efficiency. In, 2nd Annual Green Ship Technology Asia Conference, Wuhan, CN, 26 - 27 Sep 2012.

Hudson, Dominic A., Ballard, Edward J., Temarel, Pandeli and Ahmed, Tamer (2008) A non-linear numerical method for the simulation of parametric roll resonance in regular waves. In, 27th International Conference on Offshore Mechanics and Arctic Engineering (OMAE 2008), Estoril, Portugal, 15 - 20 Jun 2008.

Hudson, Dominic A. and Molland, Anthony (2006) Hydrodynamics of high speed craft. In, Meeting of London Branch of RINA, London, GB,

Hughes, A.W. and Turnock, S.R. (1997) Computational fluid dynamic investigation of hull-waterjet flow interaction. Southampton, UK, University of Southampton, 58pp. (Ship Science Reports, (102) ).

Hughes, A.W., Turnock, S.R. and Abu Sharkh, S. (2000) CFD modelling of a novel electromagnetic tip-driven thruster. In, Proceedings of the International Offshore and Polar Engineering Conference. ISOPE-2000 Seattle. The 10th (2000) International Offshore and Polar Engineering Conference & Exhibition Cupertino, USA, International Society of Offshore and Polar Engineers, 294-298.

Hughes, A.W., Turnock, S.R. and Abu Sharkh, S.M. (2003) Use of electromagnetic rim driven propulsor for waterjet propulsion systems. Royal Institution of Naval Architects Transactions A: International Journal of Maritime Engineering, 145, (A4), 41-52.

Hutchinson, K, Scott, A.L., Wright, P.N.H., Woodward, M.D. and Downes, J. (2011) Consideration of damage to ships from conceptual design to operation: the implications of recent and potential future regulations regarding application, impact, and education. In, The Damaged Ship, London, GB, 26 - 27 Jan 2011. The Royal Institution of Naval Architects.

Hyde, A.S. and Wilson, P. A. (1992) The effect of ramp functions on the theoretical time response of a body subjected to a sinusoidal force. International Shipbuilding Progress, 39, (418), 195-207.

Hyde, A.S. and Wilson, P.A. (1992) Time domain calculation of the motion of a horizontal cylinder. International Shipbuilding Progress, 39, (418), 177-193.

I

Ishimitsu, S. and Elliott, S.J. (2003) Adaptive controllers for multichannel feedforward control and their application to the active control of ship interior noise. In, Inter-Noise 2003: 32nd International Congress and Exposition on Noise Control Engineering, Seogwipo, Korea, 25 - 28 Aug 2003. , 404-411.

Ishimitsu, S. and Elliott, S.J. (2002) Comparison of adaptive controllers for multichannel feedforward control and their application to the active control of ship interior noise. In, 6th International Conference on Motion and Vibration Control, Saitama, Japan, 20 - 23 Aug 2002. , 1127-1132.

Ishimitsu, S. and Elliott, S.J. (2004) Improvement of the convergence property of adaptive feedforward controllers and their application to the active control of ship interior noise. Acoustical Science and Technology, 25, (3), 181-187. (doi 10.1250/ast.25.181).

J

James, Marion C., Turnock, Stephen R. and Hudson, Dominic A. (2012) Design of retrofit devices using CFD, validated with wind tunnel tests. In, NuTTS 2012: 15th Numerical Towing Tank Symposium, Cortona, IT, 07 - 09 Oct 2012. 6pp.

Jantapremjit, P and Wilson, P.A. (2008) Control and guidance approach using an Autonomous Underwater Vehicle. International Journal of Maritime Engineering, 150, (A2), 1-12.

Jantapremjit, P. and Wilson, P.A. (2008) Autonomous homing and docking tasks for an underwater vehicle. In, 2nd International Conference on Underwater Systems, Bali, Indonesia, 04 - 05 Nov 2008. Bali, Indonesia, Underwater Society of Indonesia6pp.

Jantapremjit, Pakpong and Wilson, P. A. (2008) Autonomous homing and docking tasks for an underwater vehicle. Journal of Bionic Engineering (Submitted).

Jantapremjit, Pakpong and Wilson, P. A. (2008) Guidance-control based path following for homing and docking using an Autonomous Underwater Vehicle. Oceans'08 (doi:10.1109/OCEANSKOBE.2008.4530935).

Jantapremjit, Pakpong and Wilson, P. A. (2007) Optimal control and guidance of homing and docking tasks using an autonomous underwater vehicle. International conference on Mechatronics and applications 2007, 243-248. (doi:10.1109/ICMA.2007.4303548).

Jantapremjit, Pakpong, Wilson, P. A. and Murphy, Alan J. (2006) A study of autonomous docking with an AUV using intelligent controls. In, International Conference on Underwater System Technology: Theory and applications 2006, Penang, Malaysia, 18 - 21 Aug 2006. Penang, Malaysia, 5pp, 12-16.

Jantapremjit, Pakpong and Wilson, P.A. (2007) Control and guidance for homing and docking tasks using an autonomous underwater vehicle. Mechatronics and Automation, 3672-3677. (doi:10.1109/ICMA.2007.4303548).

Jeong, H.K. and Shenoi, R.A. (1997) Modelling uncertainties in the optimal design of composite plates. In, 6th International Marine Design Conference (IMDC’97), Newcastle-upon-Tyne, UK, 23 - 25 Jun 1997. 14pp.

Jeong, H.K. and Shenoi, R.A. (2001) Structural reliability of fibre reinforced composite plates. RINA Transactions Part B, 143, 73-98.

Jeong, H.K., Shenoi, R.A. and Kim, K.S. (2000) Reliability analysis of thick FRP plates. Journal of Ship and Ocean Technology, 4, (2), 38-57.

Jeong, Hankoo, Shenoi, R. Ajit and Kim, Kisung (2000) Structural reliability of thick FRP plates subjected to lateral pressure loads. Journal of Ship and Ocean Technology, 4, 38-57.

Jin, J.Z. and Xing, J.T. (2006) The dynamic analysis of a three dimensional landing beam–floating beam–water interaction system subject to landing impacts. Proceedings of the IX international conference on recent advances in structural dynamics (CD-ROM),(ISBN 0854328475, Eds by M. J. Brennan et al), Paper No.5 pp1-12, July 17-19, 2006, University of Southampton, Southampton, UK, (2006), 1-21.

Jin, J.Z. and Xing, J.T. (2007) The transient dynamic analysis of a floating beam - water interaction system excited by the impact of a landing beam. Journal of Sound and Vibration, 303, (1-2), 371-390. (doi:10.1016/j.jsv.2007.01.026).

Jin, J.Z. and Xing, J.T. (2007) The transient dynamic analysis of a floating beam-water interaction system excited by the impact of a landing beam. Journal of Sound and Vibration, 303, (1-2), 371-390. (doi:10.1016/j.jsv.2007.01.026).

Jin, Jin and Xing, JingTang (2009) A convergence study on mixed mode function – boundary element method for aircraft-VLFS-water interaction system subject to aircraft landing impacts. In, Proceedings of the 28th International Conference on Ocean, Offshore and Arctic Engineering. 28th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2009) New York, USA, American Society of Mechanical Engineers, 1-11.

Jin, Jingzhe (2008) A mixed mode function: boundary element method for very large floating structure: water interaction systems excited by airplane landing impacts. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 347pp.

Johnson, M.C. and Wilson, P.A. (2005) Sea state estimated from ship motions by a statistical approach. Transactions of The Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 147, 35-51. (doi:10.3940/rina.ijme.2005.a1.050161).

Jones, D.G. (1982) SORACOS V3.2. A suite of programs for the simulation of roll and capsize of ships. Volume 1: user guide. Southampton, UK, University of Southampton, 83pp. (Ship Science Reports, (13) ).

Jones, D.G. (1982) SORACOS V3.2. A suite of programs for the simulation of roll and capsize of ships. Volume 2: maintenance manual. Southampton, UK, University of Southampton, 181pp. (Ship Science Reports, (14) ).

Junhou, P. and Shenoi, R.A. (1994) Detailed research review of the performance characteristics of out-of-plane joints in FRP marine structures. Southampton, UK, University of Southampton, 59pp. (Ship Science Reports, (83) ).

Junhou, Pei and Shenoi, R.A. (1994) The stiffness matrix of an 8-node laminated plate element based on Reddy's higher-order shear deformation theory. Southampton, UK, University of Southampton, 24pp. (Ship Science Reports, (65) ).

Junhou, Pei and Shenoi, R.A. (1994) Stiffness matrix of an anisotropic layered plate element based on equilibrium equations derived directly from the principle of virtual displacements. Southampton, UK, University of Southampton, 27pp. (Ship Science Reports, (85) ).

K

Karayiannis, T., Papanikolaou, A.D. and Molland, A.F. (2000) The introduction of high-speed ferries into the Eastern Mediterranean. In, Proceedings of the International Congress of International Maritime Association (IMAM) 2000, Ischia, Italy, May 2000. 11pp.

Keane, G.A., Taunton, D.J., Hudson, D.A. and Turnock, S.R. (2012) Group working and project assessment in undergraduate ship design assignments. In, RINA International Seminar on the Education and Professional Development of Engineers in the Maritime Industry, Southampton, GB, 14 - 15 Nov 2012. 7pp.

Keary, A., Hill, M., White, P. and Robinson, H. (1999) Simulation of the correlation velocity log using a computer based acoustic model. In, 11th International Symposium Unmanned Untethered Submersible Technology, Durham, USA, Aug 1999. , 446-454.

Kecsmar, J. and Shenoi, R.A. (2004) Some notes on the influence of manufacturing on the fatigue life of welded aluminum marine structures. Journal of Ship Production, 20, (3), 164-175.

Kia, C., Arshad, M.R., Adom, A.D. and Wilson, P.A. (2005) Supervisory fuzzy learning control for underwater target tracking. In, Proceedings of Enformatika. Enformatika '05 Istanbul, Turkey, World Enformatika Society, 92-95. (Enformatika Transactions on Engineering, Computing and Technology, 6).

Kim, K., Turnock, S.R., Ando, J., Becchi, P., Minchev, A., Semionicheva, E.Y., Van, S.H., Zhou, W.X. and Korkut, E. (2008) The Propulsion Committee: final report and recommendations to the 25th ITTC. In, UNSPECIFIED 25th ITTC (International Towing Tank Conference) , .

Knox-Johnston, Robin (2002) The seaworthy yacht. Southampton, UK, University of Southampton, 16pp. (Ship Science Reports, (126) ).

Kumar, Manoj, Shenoi, R.A. and Cox, S.J. (2009) Experimental validation of modal strain energies based damage identification method for a composite sandwich beam. Composites Science and Technology, 69, (10), 1635-1643. (doi:10.1016/j.compscitech.2009.03.019).

L

Labbe, D.F.L., Wilson, P.A., Weiss, P. and Lapierre, L. (2003) Navigation, guidance and control of an intervention Autonomous Underwater Vehicle (AUV). In, 13th Ship Systems Control Symposium, Orlando, USA, 2003.

Labbé, D.F.L. and Wilson, P.A. (2007) A numerical investigation of the effects of the spanwise length on the 3-D wake of a circular cylinder. Journal of Fluids and Structures, 23, (8), 1168-1188. (doi:10.1016/j.jfluidstructs.2007.05.005).

Labbé, D.F.L., Wilson, P.A., Weiss, P. and Lapierre, L. (2004) Freesub: Navigation Guidance and Control of an IAUV. Royal Institution of Naval Architects Transactions A: International Journal of Maritime Engineering, 146, (2), 71-9. (doi:10.3940/rina.ijme.2004.a2.3504).

Labriola, Corrado (2006) Effects of varying strain-rate on the behaviour of FRP yacht hull Structure under Slam Load Conditions. University of Southampton, School of Engineering Sciences, Masters Thesis , 149pp.

Lea, R.K. and Allen, R. Institute of Sound and Vibration (1998) Control and design of a submersible for astern motion. Southampton, UK, University of Southampton, Institute of Sound and Vibration Research (98/09).

Lea, R.K., Allen, R. and Merry, S.L. (1999) A comparitive study of control techniques for an underwater flight vehicle. International Journal of Systems Science, 30, (9), 947-964. (doi:10.1080/002077299291831).

Lea, R.K., Allen, R. and Merry, S.L. (1996) A low-cost remotely operated underwater vehicle. Measurement and Control, 29, 201-204. (13).

Lee, F.J. and Wilson, P.A. (2007) Hydro impact and fluid structure interaction of a racing yacht. Modern yacht conference, 157-163. (doi:10.3940/rina.tmy.2007.5).

Lee, June (2009) Hydor-impact, fluid-structure interaction and structural response of modern racing yacht. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 329pp.

Lee, M. and Bowness, D. (1993) Stress fields and stress intensity factors in tubular joints. In, Conference on Offshore Mechanics and Artic Engineering. Glasgow, GB, ASME, 839-846.

Lee, M. and Bowness, D. (1995) Validation of a finite element procedure for obtaining stress intensity factors in doubly curved cracks in tubular joints. In, 14th International Conference on Offshore Mechanics and Arctic Engineering, Copenhagen, DK,

Lee, M. and Jones, W. (1999) A parametric study on stress concentrations in single-sided welds in offshore tubular joints. In, American Society of Mechanical Engineers Offshore Mechanics & Arctic Engineering Conference

Lee, M. and Wilmshurst, S.R. (1993) Nonlinear FEM study of ultimate strength of tubular muliplanar double K-joints. In, OMAE 1993 : proceedings of the 12th International Conference on Offshore Mechanics and Arctic Engineering, Glasgow, Scotland, June 20-24, 1993. New York, US, American Society of Mechanical Engineers, 577-586.

Lee, M. and Wilmshurst, S.R. (1994) The static strength of multiplanar joints- a design formulation. In, The Proceedings of the 4th (1994) International Offshore and Polar Engineering Conference, Osaka, Japan, April 10-15, 1994. Colorado, US, International Society of Offshore and Polar Engineers, 8-14.

Lee, M. and Wilmshurst, S.R. (1995) Static strength of multiplanar KK-joints- a reassessment of the database and estimation equations. In, Salama, M.M., Toyoda, M., Lui, S., Kocak, M., Dos Santos, J.F., Patterson, E.A., Berge, S. and Stacey, A. (eds.) 1995 Proceedings Offshore Mechanics and Arctic Engineering Materials Symposium, June 18-22, 1995, Copenhagen, Denmark. New York, US, American Society of Mechanical Engineers, 181-191.

Lee, M., Wilmshurst, S.R., Kurobane, Y. and Makino, Y. (1995) Proposed ultimate capacity equations for CHS KK-joints under anti-symmetrical loads. In, 5th International Offshore & Polar Engineering Conference, The Hague, Netherlands,

Lee, Y., Godderidge, B., Tan, M., Temarel, P., Turnock, S.R. and Cowlan, N. (2009) Coupling between ship motion and sloshing using potential flow analysis and rapid sloshing model. In, Nineteenth (2009) International Offshore and Polar Engineering Conference (ISOPE-2009 Osaka), Osaka, Japan, 21 - 26 Jun 2009. USA, International Society of Offshore and Polar Engineers9pp.

Lee, Y.B., Tan, M. and Temarel, P. (2008) Coupling between ship motion and sloshing using potential flow analysis. In, 8th International Conference on HydroDynamics (ICHD'08), Nantes, France, 30 Sep - 03 Oct 2008. , 573-581.

Lee, Youngbum, Tan, Mingyi, Temarel, Pandeli and Miao, Shihua (2010) Coupling between flexible ship and liquid sloshing using potential flow analysis. In, Proceedings of the 29th International Conference on Ocean, Offshore and Arctic Engineering. 29th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2010) New York City, US, American Society of Mechanical Engineers.

Leekitwattana, M., Boyd, S.W. and Shenoi, R.A. (2010) An alternative design of steel-concrete-steel sandwich beam. In, 9th International Conference on Sandwich Structures (ICSS-9), California, US, 14 - 16 Jun 2010. 10pp.

Leekitwattana, M., Shenoi, R.A. and Boyd, S.W. (2009) Transverse shear strength of a bi-directional corrugated-strip-core steel sandwich plate. In, Sixth International Conference on Advances in Steel Structures (ICASS’09), Hong Kong, China, 16 - 18 Dec 2009. , 959-968.

Leighton, T.G., Farhat, M., Field, J.E. and Avellan, F. (2003) Cavitation luminescence from flow over a hydrofoil in a cavitation tunnel. Journal of Fluid Mechanics, 480, 43-60. (doi: 10.1017/S0022112003003732).

Leighton, T.G., Finfer, D.C., Chua, Gim Hwa, White, P.R. and Dix, J.K. (2011) Clutter suppression and classification using twin inverted pulse sonar in ship wakes. The Journal of the Acoustical Society of America, 130, (5), 3431-3437. (doi:10.1121/1.3626131).

Letki, L. and Hudson, D.A. (2005) Simulation of ship manoeuvring performance in calm water and waves. Southampton, UK, University of Southampton, 106pp. (Ship Science Reports, (138) ).

Lewis, S.G., Hudson, D.A. and Turnock, S.R. (2008) Improvement to body impact predictions using CFD through analysis of an unsteady boundary layer. In, 11th Numerical Towing Tank Symposium, Brest, France, 07 - 09 Sep 2008. Brest, France, ENSIETA, 65-70.

Lewis, S.G., Hudson, D.A. and Turnock, S.R. (2007) Simulation of a free falling wedge into water using 2D CFD with applications in the prediction of high speed craft motions. In, 10th Numerical Towing Tank Symposium (NuTTS'07), Hamburg, Germany, 23 - 25 Sep 2007. Hamburg, Germany, 6pp.

Lewis, S.G., Hudson, D.A. and Turnock, S.R. (2006) Visualisation techniques for interpreting performance of high speed craft. In, Proceedings of the 10th Numerical Towing Tank Symposium (NuTTS'06). 10th Numerical Towing Tank Symposium (NuTTS'06) Le Croisic, France, Ecole Centrale de Nantes.

Lewis, S.G., Hudson, D.A., Turnock, S.R., Blake, J.I.R and Shenoi, R.A. (2007) A comparison of experimental measurements of high-speed RIB motions with non-linear strip theory. Australian Journal of Mechanical Engineering, 4, (2), 165-182.

Lewis, S.G., Hudson, D.A., Turnock, S.R., Blake, J.I.R. and Shenoi, R.A. (2006) Predicting the motions of high speed RIBs: a comparison of non-linear strip theory with experiments. In, Proceedings of the 5th International Conference on High Performance Marine Vehicles (HIPER '06). 5th International Conference on High Performance Marine Vehicles (HIPER '06) London, UK, WEGEMT: Royal Institution of Naval Architects, 210-224.

Lewis, S.G., Skrzynski, M., Turnock, S.R. and Wright, A.M. (2011) Methodology for improving stern gear design of high speed craft using cfd simulation. In, Proceedings of the international conference on the design, construction & operation of super & mega yachts conference. , Royal Institution of Naval Architects, 67-76. (In Press).

Lewis, Simon G., Hudson, Dominic A., Turnock, Stephen R. and Taunton, Dominic J. (2010) Impact of a free-falling wedge with water: synchronized visualization, pressure and acceleration measurements. Fluid Dynamics Research, 42, (3), 035509-[30pp]. (doi:10.1088/0169-5983/42/3/035509).

Li, Y., Sobey, A.J. and Tan, M. (2014) Investigation into the effects of petalling on coefficient of discharge during compartment flooding. Journal of Fluids and Structures, 45, 66-78. (doi:10.1016/j.jfluidstructs.2013.11.016).

Liu, J., Allen, R. and Yi, H. (2011) Ship motion stabilizing control using a combination of model predictive control and an adaptive input disturbance predictor. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225, (5), 591-602. (doi:10.1177/2041304110394569).

Liu, J., Furlong, M.E., Palmer, A., Phillips, A.B., Turnock, S.R. and Sharkh, S.M. (2009) Design and Control of a Flight-Style AUV with Hovering Capability. In, Proceedings of the International Symposium on Unmanned Untethered Submersible Technology (UUST 2009), Durham, New Hampshire, 23-26 August 2009. UUST 09 Durham NH, USA, Autonomous Undersea Systems Institute (AUSI), [9p].

Liu, Jingyang, Allen, R., Yi, Hong and Zhang, Yufang (2010) Ship stabilization control using an adaptive input disturbance predictor. In, Proceedings of the 8th IEEE International Conference on Control and Automation. , Institute of Electrical and Electronics Engineers , 2158-2161.

Lloyd, T.P., James, M, Turnock, S.R., Phillips, A.B., Badoe, C and Banks, J (2012) University of Southampton Fluid-Structure Interactions Group OpenFOAM research. In, 2nd Gothenburg OpenFOAM user-group meeting, Gothenburg, SE, 12 - 16 Nov 2012. 24pp.

Lloyd, T.P., Turnock, S.R. and Humphrey, V.F. (2011) Unsteady CFD of a marine current turbine using OpenFOAM with generalised grid interface. In, Proceedings of the 14th Numerical Towing Tank Symposium, Poole, GB, 6pp.

Lorenzon, Filippo (2011) Safety and compliance. In, Baatz, Yvonne (ed.) Maritime Law, 2nd edition. Andover, GB, Sweet and Maxwell. (In Press).

Lorenzon, Filippo and Campas Velasco, Ainhoa (2011) Shipbuilding, sale, finance and registration. In, Baatz, Yvonne (ed.) Maritime Law, 2nd edition. Andover, GB, Sweet & Maxwell. (In Press).

Loscombe, R. (1987) An exploratory study of alternative structural materials for small SWATH craft. Southampton, UK, University of Southampton, 87pp. (Ship Science Reports, (34) ).

Loscombe, R. and Shenoi, R.A. (2006) Materials in construction. In, Claughton, A. R., Claughton, Wellicome, Wellicome, J. F. and Shenoi, R.A. (eds.) Sailing Yacht Design: Theory. 2nd Revised Edition. Southampton, UK, University of Southampton,Computing Service, 145-162.

M

Magherini, M., Turnock, S.R. and Campbell, I.M.C. (2014) Parameters affecting the performance of the c-class wingsail. Transactions of the Royal Institution of Naval Architects: International Journal of Small Craft Technology, 156, (B1), 21-34. (doi:10.3940/rina.ijsct.2014.b1.155). (In Press).

Man, S.K., Phillips, A.B., Boyd, S.W., Blake, J.I.R. and Griffiths, G. (2012) Bio-inspired aquatic flight propulsion system for agile and maneuverable underwater vehicles. In, IEEE Oceans 2012, Yeosu, KR, 21 - 24 May 2012. 10pp.

Maneepan, K., Shenoi, R.A., Blake, J.I.R. and Jeong, H.K. (2007) Genetic algorithms (GAs) based optimisation of FRP composite plated grillages in ship structures. Transactions of The Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 149, (Part A3), 1-19.

Maneepan, Komsan (2007) Genetic algorithm based optimisation of FRP composite plates in ship structures. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 157pp.

Manganelli, P., Wagermakers, B. and Wilson, P.A. (2003) Investigation of slamming loads using slam patches on a scale model of an Open 60' class yacht. Royal Institution of Naval Architects Transactions 2003 Part B1 - International Journal of Small Craft Technology, 145, (B1), 47-62. (doi:10.3940/rina.ijsct.2003.b1.6031).

Manganelli, P. and Wilson, P.A. (2001) Measurements of slamming on yacht structures. In, 15th Chesapeake Sailing Yacht Symposium, Chesapeake, USA, 2001. Chesapeake, USA, , 79-88.

McGregor, J. and Downes, J. (2006) Structural design for survivability. In, 9th International Marine Design Conference (IMDC 2006): Advancing Marine Design, Ann Arbor, US,

McGregor, J.I., Moore, C.S., Downes, J. and Aksu, S. (2009) Evaluation of the environmental risk of aframax tankers. In, World Maritime Technology Conference, India, Republic of, IN,

McPhail, S. (2007) Autosub operations in the Arctic and the Antarctic. In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV technology for Polar science: collaborative Autosub science in extreme environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, 27-38.

Meunier, M. and Shenoi, R.A., Wilson, P.A. and Hearn, G.E. (eds.) (2001) Transient analysis of FRP sandwich panels used in High Performance Craft. Proceedings of the 6th International Conference on Fast Sea Transportation, FAST2001, Southampton, 3 (doi:10.3940/rina.ft.2001.74).

Miao, S.H. and Temarel, P (2009) Application of 2D hydroelasticity theory to investigate the failure of a containership. In, 5th International Conference on Hydroelasticity in Marine Technology, Southampton, UK, 08 - 10 Sep 2009. Southampton, UK, University of Southampton10pp, 245-254.

Millard, N.W., McPhail, S.D., Stevenson, P., Pebody, M., Perrett, J.R., Webb, A.T., Squires, M., Griffiths, G., Thorpe, S.A., Collins, M.B., Statham, P., German, C., Burkill, P.H., Stansfield, K., Smeed, D.A. and AUTOSUB Science and Engineering Teams (2003) Multidisciplinary ocean science applications of an AUV: the AUTOSUB science missions programme. In, Griffiths, G. (ed.) The technology and applications of autonomous underwater vehicles. Abingdon, UK, Taylor & Francis, 139-159. (Ocean Science and Technology 2).

Misirlis, K., Downes, J. and Dow, R.S. (2010) Assessment of the ultimate compressive strength for FRP plates with geometrical imperfections. In, 11th International Symposium on Practical Design of Ships and Other Floating Structures, Rio de Janeiro, BR, 19 - 24 Sep 2010. COPPE/UFRJ.

Moat, B.I. (2003) Quantifying the effects of airflow distortion on anemometer wind speed measurements from merchant ships. University of Southampton, School of Engineering Sciences, Ship Science, Doctoral Thesis , 163pp.

Moat, B.I. and Yelland, M.J. (2008) Going with the flow: state of the art marine meteorological measurements on the new NERC research vessel. Weather, 63, (6), 158-159. (doi:10.1002/wea.184).

Moat, B.I., Yelland, M.J. and Molland, A.F. (2004) Possible biases in wind speed measurements from merchant ships. In, 5th International Colloquium on Bluff Body Aerodynamics and Applications, Ottawa, Canada, 11 - 15 Jul 2004. Ottawa, Canada, National Research Council Canada, Aerodynamics Laboratory4pp, 537-540.

Moat, B.I., Yelland, M.J., Pascal, R.W. and Molland, A.F. (2005) An overview of the airflow distortion at anemometer sites on ships. International Journal of Climatology, 25, (7), 997-1006. (doi:10.1002/joc.1177).

Moat, B.I., Yelland, M.J., Pascal, R.W. and Molland, A.F. (2006) Quantifying the airflow distortion over merchant ships. Part I: validation of a CFD model. Journal of Atmospheric and Oceanic Technology, 23, (3), 341-350. (doi:10.1175/JTECH1858.1).

Molland, A.F. (1977) A computer program for the analysis of wind tunnel control surface data. Southampton, UK, University of Southampton, 41pp. (Ship Science Reports, (2/77) ).

Molland, A.F. (1977) The design, construction & calibration of a five-component strain gauge and tunnel dynamometer. Southampton, UK, University of Southampton, 199pp. (Ship Science Reports, (1/77) ).

Molland, A.F. (1977) The free-stream characteristics of a semi-balanced ship skeg-rudder. Southampton, UK, University of Southampton, 68pp. (Ship Science Reports, (3/77) ).

Molland, A.F. (1978) Further free-stream characteristics of semi-balanced ship skeg-rudders. Southampton, UK, University of Southampton, 71pp. (Ship Science Reports, (2/78) ).

Molland, A.F. (1985) A modified lifting line analysis for semi-balanced ship skeg-rudders. Southampton, UK, University of Southampton, 81pp. (Ship Science Reports, (20) ).

Molland, A.F. (1992) The prediction of rudder-propeller interactions using blade element-momentum propeller theory and modified rudder lifting line theory. Southampton, UK, University of Southampton, 33pp. (Ship Science Reports, (54) ).

Molland, A.F. (1980) Pressure-distribution investigation of a semi-balanced ship skeg-rudder. Southampton, UK, University of Southampton, 99pp. (Ship Science Reports, (5/81) ).

Molland, A.F. (1978) Rudder design data for small craft. Southampton, UK, University of Southampton, 66pp. (Ship Science Reports, (1/78) ).

Molland, A.F., Bahaj, A.S., Chaplin, J.R. and Batten, W.M.J. (2004) Measurements and predictions of forces, pressures and cavitation on 2-D sections suitable for marine current turbines. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 218, (2), 127-138. (doi:10.1243/1475090041651412).

Molland, A.F. and Barbeau, T.-E. (2003) An investigation into the aerodynamic drag on the superstructures of fast catamarans. The Transactions of the Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 145, 29-39. (IJME303).

Molland, A.F. and Karayannis, T. (2003) Technical and economic investigations of fast ferry transportation. In, Proceedings of Seventh International Conference on Fast Sea Transportation, FAST, Ischia, Italy, 07 - 10 Oct 2003.

Molland, A.F. and Lee, A.R. (1995) The theoretical investigation of a series of high speed displacement catamaran forms: variation of prismatic coefficient. Southampton, UK, University of Southampton, 65pp. (Ship Science Reports, (87) ).

Molland, A.F. and Lee, Adrian R. (1995) Resistance experiments on a series of high speed displacement catamaran forms: variation of prismatic coefficient. Southampton, UK, University of Southampton, 68pp. (Ship Science Reports, (86) ).

Molland, A.F. and Taunton, D.J. (1999) Methods for assessing the seakeeping performance of competing high speed vessel designs. In, Hydrodynamics of High Speed Craft, London, UK, 24 - 25 Nov 1999. London, UK, The Royal Institution of Naval Architects15pp, 1-15.

Molland, A.F., Turnock, S. R. and Hudson, D.A. (2011) Ship resistance and propulsion: practical estimation of ship propulsive power, Cambridge, GB, Cambridge University Press, 544pp.

Molland, A.F. and Turnock, S.R. (1996) A compact computational method for predicting forces on a rudder in a propeller slipstream. Transactions of the Royal Institution of Naval Architects, 138, 227-244.

Molland, A.F. and Turnock, S.R. (1991) The design and construction of model ship propeller blades in hybrid composite materials. Composites Manufacturing, 2, (1), 39-47. (doi:10.1016/0956-7143(91)90157-C).

Molland, A.F. and Turnock, S.R. (1990) The design and construction of propeller blades in composite materials for a wind tunnel model. Southampton, UK, University of Southampton, 24pp. (Ship Science Reports, (41) ).

Molland, A.F. and Turnock, S.R. (1990) The design, construction and calibration of a thrust and torque dynamometer for a wind tunnel propeller model. Southampton, UK, University of Southampton, 28pp. (Ship Science Reports, (44) ).

Molland, A.F. and Turnock, S.R. (1994) Developments in modelling ship rudder-propeller interaction. In, Brebbia, C.A., Murthy, T.K.S, Wilson, P.A. and Washams, P. (eds.) Marine, Offshore and Ice Technology. Ashurst, UK, WIT Press, 255-263. (Transactions of the Wessex Institute, 5). (doi:10.2495/CMO940251).

Molland, A.F. and Turnock, S.R. (1998) The effect of the hull on the manoeuvring performance of rudders. In, International Conference on Ship Motions and Manoeuvrability, London, UK, 18 - 19 Feb 1998. London, UK, Royal Institution of Naval Architects10pp.

Molland, A.F. and Turnock, S.R. (1994) Further developments in the use of blade element-momentum and modified lifting line theories to predict rudder-propeller interactions. Southampton, UK, University of Southampton, 36pp. (Ship Science Reports, (80) ).

Molland, A.F. and Turnock, S.R. (1992) Further wind tunnel tests on the influence of propeller loading on ship rudder performance. Southampton, UK, University of Southampton, 124pp. (Ship Science Reports, (52) ).

Molland, A.F. and Turnock, S.R. (1992) Influence of propeller loading on ship rudder performance. Transactions of the Royal Institution of Naval Architects, 135, 105-120.

Molland, A.F. and Turnock, S.R. (2007) Marine rudders and control surfaces: principles, data, design and applications, Oxford, UK, Butterworth-Heinemann, 386pp.

Molland, A.F. and Turnock, S.R. (1992) The prediction of ship rudder performance characteristics in the presence of a propeller. In, Wilson, P.A. (ed.) Manoeuvring and Control of Marine Craft. Proceedings of the Second International Conference, held in Southampton, UK, 14-17 July 1992. MCMC'92: Manoeuvring and Control of Marine Craft. 2nd International Conference Boston, USA, Computational Mechanics Publications, 475-492.

Molland, A.F. and Turnock, S.R. (1993) Preliminary wind tunnel investigation of the influence of propeller loading on a ship rudder in the bollard (J=0) condition. Southampton, UK, University of Southampton, 39pp. (Ship Science Reports, (49) ).

Molland, A.F. and Turnock, S.R. (1993) Wind tunnel investigation of the influence of propeller loading on a semi-balanced skeg rudder. Southampton, UK, University of Southampton, 55pp. (Ship Science Reports, (48) ).

Molland, A.F. and Turnock, S.R. (1991) Wind tunnel investigation of the influence of propeller loading on ship rudder performance. Southampton, UK, University of Southampton, 151pp. (Ship Science Reports, (46) ).

Molland, A.F. and Turnock, S.R. (1990) Wind tunnel test results for a model ship propeller based on a modified Wageningen B4.40. Southampton, UK, University of Southampton, 29pp. (Ship Science Reports, (43) ).

Molland, A.F. and Turnock, S.R. (1995) Wind tunnel tests on the effect of a ship hull on rudder-propeller performance at different angles of drift. Southampton, UK, University of Southampton, 297pp. (Ship Science Reports, (76) ).

Molland, A.F. and Turnock, S.R. (1993) Wind tunnel tests on the influence of propeller loading on ship rudder performance: four quadrant operation, low and zero speed operation. Southampton, UK, University of Southampton, 162pp. (Ship Science Reports, (64) ).

Molland, A.F., Turnock, S.R. and Hudson, D.A. (2009) Design metrics for evaluating the propulsive efficiency of future ships. In, IMDC 2009: 10th International Marine Design Conference, Trondheim, Norway, 26 - 29 May 2009. Trondheim, Norway, Tapir Academic Press17pp, 209-225.

Molland, A.F., Turnock, S.R., Hudson, D.A. and Utama, I.K.A.P. (2014) Reducing ship emissions: a review of potential practical improvements in the propulsive efficiency of future ships. Transactions of Royal Institution of Naval Architects Part A, 156, 175-188. (doi:10.3940/rina.ijme.2014.a2.289).

Molland, A.F., Turnock, S.R. and Smithwick, J.E.T. (2000) Design and performance characteristics of semi-balanced ship skeg rudder. RINA Transactions Part D, 142, 230-247.

Molland, A.F., Turnock, S.R. and Smithwick, J.E.T. (1998) Design studies of the manoeuvring performance of rudder-propeller systems. In, Oosterveld, M.C.W. and Tan, S.G. (eds.) Proceedings of the Seventh International Symposium on Practical Design of Ships and Mobile Units, The Hague, The Netherlands, September 1998. Seventh International Symposium on Practical Design of Ships and Mobile Units (PRADS '98) Amsterdam, Netherlands, Elsevier, 807-816. (Developments in Marine Technology 11).

Molland, A.F., Turnock, S.R. and Smithwick, J.E.T. (1996) Investigation of the influence of propeller loading on a ship rudder in the bollard (J=0) condition. Southampton, UK, University of Southampton, 80pp. (Ship Science Reports, (94) ).

Molland, A.F., Turnock, S.R. and Smithwick, J.E.T. (1995) Wind tunnel tests on the influence of propeller loading and the effect of a ship hull on skeg-rudder performance. Southampton, UK, University of Southampton, 187pp. (Ship Science Reports, (90) ).

Molland, A.F., Turnock, S.R. and Wilson, P.A. (1996) Performance of an enhanced force prediction model in a ship manoeuvring simulator. In, Chislett, M.S. (ed.) MARSIM '96, Proceedings of International Conference on Marine Simulation and Manoeuvrability. MARSIM'96 - International Conference on Marine Simulation and Manoeuvrability Rotterdam, The Netherlands, A.A. Balkema, 425-435. (Submitted).

Molland, A.F. and Utama, I.K.A.P. (2002) Experimental and numerical investigations into the drag characteristics of a pair of ellipsoids in close proximity. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 216, (2), 107-115. (doi:10.1243/147509002762224324).

Molland, A.F. and Utama, I.K.A.P. (1997) Wind tunnel investigation of a pair of ellipsoids in close proximity. Southampton, UK, University of Southampton, 83pp. (Ship Science Reports, (98) ).

Molland, A.F. and Watson, M.J. (1988) The regression analysis of some ship model resistance data. Southampton, UK, University of Southampton, 16pp. (Ship Science Reports, (36) ).

Molland, A.F., Wellicome, J.F. and Couser, P.R. (1994) Resistance experiments on a systematic series of high speed displacement catamaran forms: variation of length-displacement ratio and breadth-draught ratio. Southampton, UK, University of Southampton, 84pp. (Ship Science Reports, (71) ).

Molland, A.F., Wellicome, J.F. and Couser, P.R. (1994) Theoretical prediction of the wave resistance of slender hull forms in catamaran configurations. Southampton, UK, University of Southampton, 36pp. (Ship Science Reports, (72) ).

Molland, A.F., Wilson, P.A. and Chandraprabha, S. (2000) The predictions of ship generated near-field wash waves using thin strip theory.

Molland, A.F., Wilson, P.A., Lewthwaite, J.C. and Taunton, D.J. (2005) An investigation into the hydrodynamic characteristics of a high-speed partial air cushion supported catamaran (PACSCAT). In, Proceedings of FAST 2005. Eighth International Conference on Fast Sea Transportation (FAST 2005) , Institute of Marine Engineering, Science and Technology.

Molland, A.F., Wilson, P.A. and Taunton, D.J. (2002) Experimental measurement of the wash characteristics of a fast displacement catamaran in deep water. Southampton, UK, University of Southampton, 62pp. (Ship Science Reports, (124) ).

Molland, A.F., Wilson, P.A. and Taunton, D.J. (2002) Further experimental wash wave measurements for high speed displacement catamaran forms in shallow water. Southampton, UK, University of Southampton, 156pp. (Ship Science Reports, (123) ).

Molland, A.F., Wilson, P.A. and Taunton, D.J. (2003) Resistance experiments on a systematic series of high speed displacement monohull and catamaran forms in shallow water. Southampton, UK, University of Southampton, 48pp. (Ship Science Reports, (127) ).

Molland, A.F., Wilson, P.A. and Taunton, D.J. (2001) A systematic series of experimental wash wave measurements for high speed displacement monohull and catamaran forms in shallow water. Southampton, UK, University of Southampton, 194pp. (Ship Science Reports, (122) ).

Molland, A.F., Wilson, P.A. and Taunton, D.J. (2002) Theoretical prediction of the characteristics of ship generated near-field wash waves. Southampton, UK, University of Southampton, 33pp. (Ship Science Reports, (125) ).

Molland, A.F., Wilson, P.A., Taunton, D.J., Chandraprabha, S. and Ghani, P.A. (2004) Resistance and wash measurements on a series of high speed displacement monohull and catamaran forms in shallow water. Royal Institution of Naval Architects Transactions A: International Journal of Maritime Engineering, 146, (2), 19-38. (doi:10.3940/rina.ijme.2004.a2.3604).

Molland, A.F., Wilson, P.A., Taunton, D.J., Chandraprabha, S. and Ghani, P.A. (2004) Resistance and wash measurements on a series of high speed displacement monohull and catamaran forms in shallow water. In, 25th Duisburg Colloquium on Ship and Ocean Technology, Duisberg, Germany, Jul 2004. 10pp.

Molland, A.F., Wilson, P.A., Taunton, D.J. and Ghani, P.A. (2003) Numerical estimation of ship wash waves in deep and shallow water. In, Casslla, P. (ed.) FAST2003: The 7th International Conference on FAST SEA TRANSPORTATION. 7th International Conference on Fast Sea Transportation (FAST 2003) Ischia, Italy, University of Naples, 33-40. (3310).

Molland, A.F., Wilson, P.A., Turnock, S.R., Taunton, D.J.S. and Chandraprabha, S, Wilson, P. A. (ed.) (2001) The prediction of the characteristics of ship generated near field wash waves. Proceedings of 6th International Conference on fast sea transportation, FAST2001, 1, 149-164. (doi:10.3940/rina.ft.2001.15).

Molland, A.F. and Wilson, P.A. (2010) The development of hydrodynamics: 1860–2010. In, Transactions and Annual Report 2010. London, GB, Royal Institution of Naval Architects, 32-34.

Moore, N., Wilson, P.A. and Peters, A.J. (2002) An investigation into wing in ground effect aerofoil geometry. In, RTO-MP-095. RTO SCI Symposium on Challenges in Dynamics, System Identification, Control and Handling Qualities for Land, Air, Sea and Space Vehicles Paris, France, NATO RTO, 11-[20pp].

Moy, S.S.J., Shenoi, R.A., Allen, H.G. and Miao, Shihua (1992) The behaviour of modern marine composite panels under extreme pressure loads. Southampton, GB, University of Southampton

Murphy, Alan J. and Hearn, Grant E. (2007) A practical and robust method to experimentally determine the location of the region of transition from laminar to turbulent flow on a towed body. Transactions of Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 149, (A1), 31-43.

Murthy, T.K., Wilson, P.A. and Wadhams, P. (1994) Marine offshore and ice technology, Southampton, Uk, Computational Mechanics Publications, 402pp.

Murthy, T.K.S and Wilson, P.A. (1994) Design of Marine & Offshore Structures, Southampton, UK, Computational Mechanics Publications, 400pp.

Murton, Bramley J., Huhnerbach, Veit and Garrard, Jo (2012) Exploring ultradeep hydrothermal vents in the Cayman Trough by ROV. Sea Technology, 53, (9), 9-15.

Myers, L. and Bahaj, A. S. (2005) Simulated electrical power potential harnessed by marine current turbine arrays in the Alderney Race. Renewable Energy, 30, (11), 1713-1731. (doi:10.1016/j.renene.2005.02.008).

Myers, L.E. and Bahaj, A.S. (2004) Basic operational parameters of a horizontal axis marine current turbine. In, Proceedings of the 8th World Renewable Energy Congress (WREC VIII). World Renewable Energy Congress (WREC-VIII) , Elsevier Science.

Myers, L.E. and Bahaj, A.S. (2005) Wake studies of a 1/30th scale horizontal axis marine current turbine. In, Imbabi, M. and Mitchell, P. (eds.) Proceedings of the World Renewable Energy Congress 2005. Proceedings World Renewable Energy Congress (WREC 2005) , Elsevier Science, 1205-1210.

N

NIcholls-Lee, R.F and Turnock, S.R. (2008) Tidal energy extraction: renewable, sustainable and predictable. Science Progress, 91, (1), 81-111. (doi:10.3184/003685008X285582).

Nayak, A.K. and Shenoi, R.A. (2005) Finite element analysis of sandwich plates and shells. In, Shenoi, R.A., Groves, A. and Rajapaske, Y.D.S. (eds.) Theory and Applications of Sandwich Structures. Southampton, UK, University of Southampton Press, 267-286.

Nebylov, A. and Wilson, P. A. (2002) Ekranoplanes: Controlled flight close to the sea, Lyndhurst, UK, WIT Press, 236pp.

Newman, Simon (2004) The safety of shipborne helicopter operation. Aircraft Engineering and Aerospace Technology, 76, (5), 487-501. (doi:10.1108/00022660410555167).

Nicholls, K.W., Abrahamsen, E.P., Buck, J.J.H., Dodd, P.A., Goldblatt, C., Griffiths, G., Heywood, K.J., Hughes, N.E., Kaletzky, A., Lane-Serff, G.F., McPhail, S.D., Millard, N.W., Oliver, K.I.C., Perrett, J., Price, M.R., Pudsey, C.J., Saw, K., Stansfield, K., Stott, M.J., Wadhams, P., Webb, A.T. and Wilkinson, J.P. (2006) Measurements beneath an Antarctic ice shelf using an autonomous underwater vehicle. Geophysical Research Letters, 33, (8), L08612-[4pp]. (doi:10.1029/2006GL025998).

Nicholls-Lee, R.F., Bostock, T.D. and Watt, P. (2011) Fully submerged composite cryogenic testing. In, 18th International Conference on Composite Materials, Jeju Island, South Korea, 21 - 26 Aug 2011. 5pp.

Nicholls-Lee, R.F., Boyd, S.W. and Turnock, S.R. (2009) Development of high performance composite bend-twist coupled blades for a horizontal axis tidal turbine. In, 17th International Conference on Composite Materials, Edinburgh, UK, 27 - 31 Jul 2009. London, UK, Institute of Materials, Minerals and Mining10pp.

Nicholls-Lee, R.F., Boyd, S.W. and Turnock, S.R. (2009) Use of cryogenic buoyancy systems for controlled removal of heavy objects from the seabed. In, ASME 28th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2009, Honolulu, Hawaii, USA, USA, American Society Of Mechanical Engineers (ASME)10pp.

Nicholls-Lee, R.F., Turnock, S.R. and Boyd, S.W. (2008) Performance prediction of a free stream tidal turbine with composite bend-twist coupled blades. At 2nd International Conference on Ocean Energy (ICOE 2008), Brest, France, 15 - 17 Oct 2008. 9pp.

Nicholls-Lee, Rachel F., Boyd, Stephen W. and Turnock, Stephen R. (2010) Obtaining experimental data suitable for validation of a numerical design tool for an adaptive composite free stream tidal turbine blade. In, The 11th International Symposium on Practical Design of Ships and Other Floating Structures, Rio de Janeiro, Brazil, 19 - 24 Sep 2010. 7pp. (Submitted).

Nicholls-Lee, Rachel F., Turnock, Stephen R. and Boyd, Stephen W. (2008) Simulation based optimisation of marine current turbine blades. 7th International Conference on Computer and IT Applications in the Maritime Industries (COMPIT’08), Liège, Belgium, 21 - 23 Apr 2008. Liège, Belgium, Architecture Navale, Génie Maritime, Navigation Intérieure et Maritime, Analyse des Systèmes de Transport, 314-328.

Nicholls-Lee, Rachel F., Turnock, Stephen R., Tan, Mungyi, McDonald, Paul C. and Shenoi, R.A. (2011) Development of a prototype test rig for a cryogenic, marine, heavy lift, buoyancy system. In, 30th International Conference on Ocean, Offshore and Arctic Engineering, Rotterdam, NL, 19 - 24 Jun 2011. 9pp.

Nielsen, F.G., Argyriadis, K., Fonseca, N., Le Boulluec, M., Liu, P., Suzuki, H., Sirkar, J., Tarp-Johansen, N.J., Turnock, S.R., Waegter, J. and Zong, Z. (2009) [Report of] Specialist Committee V.4: ocean, wind and wave energy utilization. In, Proceedings of the 17th International Ship and Offshore Structures Congress. 17th International Ship and Offshore Structures Congress Seoul, Korea, Seoul National University, 201-257.

Nikolic, D., Allen, R., Collier, R., Taunton, D., Hudson, D. and Shenoi, R.A. (2009) Human factors in the design of high speed marine craft. At Maritime Event for Industry & the Public, Southampton, GB, 15 Sep 2009.

O

Oppenheim, B.W. and Wilson, P.A. (1980) Continuous digital simulation of the second-order slowly varying wave drift force. Journal of Ship Research, 24, (3), 181-189.

Oppenheim, B.W. and Wilson, P.A. (1982) Polynomial approximations to mooring forces in equations of low-frequnecy vessel motions. Journal of Ship Research, 26, (1), 16-24.

Oppenheim, B.W. and Wilson, P.A. (1982) Static 2-D solution of a mooring line of arbitary composition in the vertical and horizontal operating modes. International Shipbuilding Progress, 29, (334), 142-153.

Oppenhein, B.W. and Wilson, P.A. (1982) Low frequency dynamics of moored vessels. Marine Technology, 19, (1), 1-22.

P

Palaniappan, J., Boyd, S.W., Shenoi, R.A. and Mawella, J. (2009) Repair efficiency of resin infused scarf repair to marine sandwich structures. In, 17th International conference on composite materials (ICCM 17), Edinburgh, UK, 27 - 31 Jul 2009.

Palaniappan, J., Brisoux, S., Boyd, S.W., Shenoi, R.A. and Mawella, J. (2009) Repair efficiency studies on resin infused scarf repaired composite structure. At 10th Deformation and Fracture of Composites (DFC 10), Sheffield, GB,

Palmer, A., Hearn, G.E. and Stevenson, P. (2008) Modelling tunnel thrusters for autonomous underwater vehicles. In, Navigation, Guidance and Control of Underwater Vehicles (NGCUV'08), Killaloe, Co. Clare, Ireland, 08 - 10 Apr 2008. University of Limerick, International Federation of Automatic Control (IFAC)6pp.

Palmer, Alistair Robin (2009) Analysis of the propulsion and manoeuvring characteristics of survey-style AUVs and the development of a multi-purpose AUV. University of Southampton, School of Engineering, Science and Mathematics, Doctoral Thesis , 225pp.

Park, J.H. and Temarel, P. (2007) The influence of nonlinearities on wave-induced motions and loads predicted by two-dimensional hydroelasticity analysis. In, The 10th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2007), Houston, USA, 01 - 05 Oct 2007. USA, American Bureau of Shipping, Vol. 1, 27-34.

Parson, L. and Edwards, R. (2007) Political/economic drivers: potential for AUV technologies in United Nations Convention on the Law of the Sea (UNCLOS). In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, p.143.

Pashias, C. and Turnock, S.R. (2003) Hydrodynamic design of a bi-directional, rim-driven ducted thruster suitable for underwater vehicles. Southampton, UK, University of Southampton, 52pp. (Ship Science Reports, (128) ).

Pashias, C., Turnock, S.R. and Abu-Sharkh, S.M. (2003) Design optimization of a bi-directional integrated thruster. In, Proceedings of Propellors / Shafting Symposium 2003 (SNAME 13). Propellers / Shafting 2003 Symposium (SNAME 13): Technology for the 21st Century USA, Society of Naval Architects and Marine Engineers, 13pp. (1941).

Patrikalakis, N.M., Weymouth, G.D., Kurniawati, Hanna, Leighton, Joshua, Papadopoulos, Georgios, Valdivia y Alvarado, Pablo, Taher, Tawfiq and Khan, Rubaina (2012) Modeling and inspection applications of a coastal distributed autonomous sensor network. In, International Conference on Ocean, Offshore and Arctic Engineering, Rio de Janeiro, BR, 01 - 06 Jul 2012.

Pattenden, R.J., Turnock, S.R., Bissuel, M. and Pashias, C. (2005) Experiments and numerical modelling of the flow around the kvlcc2 hullform at an angle of yaw. In, Proceedings of the 5th Osaka Colloquium on Advanced Research on Ship Viscous Flow and Hull Form Design by EFD and CFD Approaches. 5th Osaka Colloquium on Advanced Research on Ship Viscous Flow and Hull Form Design by EFD and CFD Approaches , Osaka Prefecture University, 163-170.

Pattenden, R.J., Turnock, S.R. and Bressloff, N.W. (2003) Developments in the use of large eddy simulation for ship hydrodynamics. In, The 3rd International 'Computational Fluid Dynamics in Ship Hydrodynamics' Conference (CFD2003), London, UK, 06 - 07 Feb 2003. London, UK, Royal Institute of Naval Architects.

Pattenden, R.J., Turnock, S.R. and Pashias, C. (2005) Oblique ship flow predictions using identification of vortex centres to control mesh adaptation. In, Proceedings of CFDWS05. CFDWS2005 , Computational Fluid Dynamics, 454-459.

Pebody, M. (2007) Autonomy and collision avoidance. In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, 89-96.

Pemberton, R., Turnock, S.R. and Watson, S.J. (2001) Free surface CFD simulations of the flow around a planing plate. In, Proceedings of the 6th International Conference on Fast Sea Transportation. 6th International Conference on Fast Sea Transportation (FAST 2001) London, UK, Royal Institution of Naval Architects, 321-327.

Pemberton, R.J., Turnock, S.R. and Rogers, E. (2003) Identification of bilge vortices within CFD simulations. Transactions of the Royal Institution of Naval Architects (Part A) - International Journal of Maritime Engineering, 145, (A1), 57-66.

Perez G,, C.A., Tan, M. and Wilson, P.A. (2008) Validation and verification of hull resistance components using a commercial CFD code. In, 11th Numerical Towing Tank Symposium, Brest, France, 07 - 09 Sep 2008. 6pp.

Philips, A.B., Steenson, L.V., Rogers, E, Turnock, S.R., Harris, C.A. and Furlong, M. (2013) Delphin2: an over actuated autonomous underwater vehicle for manoeuvring research. Transactions of the Royal Institution of Naval Architects, Part A – International Journal of Maritime Engineering, 155, (A4), 171-180.

Phillips, A. B., Turnock, Stephen R. and Furlong, Maaten (2010) Influence of turbulence closure models on the vortical flow field around a submarine body undergoing steady drift. Journal of Marine Science and Technology, 15, (3), 201-217. (doi:10.1007/s00773-010-0090-1 ).

Phillips, A.B., Blake, J.I.R., Boyd, S.W., Ward, S. and Griffiths, G. (2012) Nature in Engineering for Monitoring the Oceans (NEMO): an isopycnal soft bodied approach for deep diving autonomous underwater vehicles. In, Autonomous Underwater Vehicles (AUV), 2012 IEEE/OES. Piscataway NJ, USA, IEEE, 1-8. (doi:10.1109/AUV.2012.6380743).

Phillips, A.B., Furlong, M. and Turnock, S.R. (2007) The use of computational fluid dynamics to determine the dynamic stability of an autonomous underwater vehicle. In, 10th Numerical Towing Tank Symposium (NuTTS'07), Hamburg, Germany, 23 - 25 Sep 2007. Hamburg, Germany, 6pp.

Phillips, A.B., Furlong, M. and Turnock, S.R. (2007) Virtual planar motion mechanism tests of the autonomous underwater vehicle autosub. In, STG-Conference / Lectureday "CFD in Ship Design", Hamburg, Germany, 26 Sep 2007. Hamburg, Germany, Institute M-8 of Hamburg University of Technology8pp.

Phillips, A.B., Furlong, M.E. and Turnock, S.R. (2009) Accurate capture of rudder-propeller interaction using a coupled blade element momentum-RANS approach. In, 12th Numerical Towing Tank Symposium, Cortona, Italy, 04 - 06 Oct 2009. Cortona, Italy, 6pp.

Phillips, A.B., Furlong, Maaten and Turnock, Stephen R. (2007) The use of computational fluid dynamics to assess the hull resistance of concept autonomous underwater vehicles. OCEANS 2007 - Europe, Aberdeen, UK, 18 - 21 Jun 2007. Richardson TX, USA, Institute of Electrical and Electronics Engineers, 1292-1297. (doi:10.1109/OCEANSE.2007.4302434).

Phillips, A.B., Turnock, S.R. and Furlong, M. (2008) Comparisons of CFD simulations and in-service data for the self propelled performance of an Autonomous Underwater Vehicle. In, 27th Symposium of Naval Hydrodynamics, Seoul, Korea, 05 - 10 Oct 2008. Seoul, Korea, Office of Naval Research15pp.

Phillips, A.B., Turnock, S.R. and Furlong, M. (2010) The use of computational fluid dynamics to aid cost-effective hydrodynamic design of autonomous underwater vehicles. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 224, (4), 239-254. (doi:10.1243/14750902JEME199).

Phillips, A.B., Turnock, S.R. and Furlong, M.E. (2010) Accurate capture of rudder-propeller interaction using a coupled blade element momentum-RANS approach. Ship Technology Research (Schiffstechnik), 57, (2), 128-139.

Phillips, A.B., Turnock, S.R. and Furlong, M.E. (2009) Evaluation of manoeuvring coefficients of a self-propelled ship using a blade element momentum propeller model coupled to a Reynolds averaged Navier Stokes flow solver. Ocean Engineering, 36, (15-16), 1217-1225. (doi:10.1016/j.oceaneng.2009.07.019).

Phillips, Alexander B., Blake, J.I.R., Smith, B., Boyd, S.W. and Griffiths, G. (2010) Nature in engineering for monitoring the oceans: towards a bio-inspired flexible AUV operating in an unsteady flow. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 224, (4), 267-278. (doi:10.1243/14750902JEME201).

Phillips, B., Robinson, H. and Hill, M. (2000) A new correlation sonar velocity sensor (COVELIA). In, Oceanology International 2000, Brighton, UK, 07 - 10 Mar 2000. 8pp.

Phillips, B., Robinson, H. and Hill, M. (2000) On the development of a correlation sonar velocity log. In, Unmanned Undersea Vehicle Symposium, Newport, USA, 24 - 28 Apr 2000.

Phillips, H.J. and Shenoi, R.A. (1994) Analytical modelling concerning onset of delamination in FRP beam panels. Southampton, UK, University of Southampton, 94pp. (Ship Science Reports, (82) ).

Phillips, H.J. and Shenoi, R.A. (1995) Approaches to assessment of damage tolerance levels in FRP structures. Southampton, UK, University of Southampton, 66pp. (Ship Science Reports, (88) ).

Prentice, D.R. (1979) Methods to determine the behaviour of a ferrocement panel. Southampton, UK, University of Southampton, 76pp. (Ship Science Reports, (4/78) ).

Price, W.G. (2000) Hydroelasticity developments in maritime engineering. In, 2nd International Conference on Oceanic Engineering (OCEAN 2000), Valdivia, CL,

Price, W.G., Salas Inzunza, M. and Temarel, P. (2002) The dynamic behaviour of a mono-hull in oblique waves using two- and three dimensional fluid-structure interaction models. Royal Institution of Naval Architects Transactions 2002 Part A, 144, 1-26.

Price, W.G. and Westlake, P.C. (1993) Interfacial waves produced by a submerged body moving in a layered fluid. Southampton, UK, University of Southampton, 78pp. (Ship Science Reports, (62) ).

Price, W.G. and Westlake, P.C. (1996) Trapped internal waves produced by a submerged slender body moving in a stratified fluid. Southampton, UK, University of Southampton, 77pp. (Ship Science Reports, (91) ).

Prien, Ralf, Pascal, Robin, Mowlem, Matt, Denuault, Guy and Sosna, Maciej (2005) Development and first results of a new fast response microelectrode DO-sensor. In, Proceedings of Oceans - Europe 2005. Oceans 2005 - Europe, Vols 1 and 2 , Institute of Electrical and Electronics Engineers, 744-747.

Puget, Y., Wood, R.J.K. and Trethewey, K. (1997) Cost effective tribo-corrosion resistant coatings for aggressive marine environments. In, Proceedings of 1st World Tribology Congress, London, UK, Sep 1997. , p.369.

Q

Qin, Li, Zhou, Xincong, Cao, Pengju, Xu, Pingyong, Xiang, Yongkun and Xiong, Yeping (2014) Analysis of longditudinal vibration power-flow in marine propulsion shafting system. In, 21st International Congress on Sound and Vibration (ICSV21), Beijing, CN, 13 - 17 Jul 2014. 10pp.

Querard, A., Temarel, P. and Turnock, S.R. (2006) Developments on hydroelasticity of ships using RANS. In, 10th Numerical Towing Tank Symposium, Le Crosic, France, 01 - 03 Oct 2006. Nantes, France, Ecole Centrale de Nantes6pp.

Querard, A.B.G., Temarel, P. and Turnock, S.R. (2007) Hydrodynamics of ship-like sections in heave, sway and roll motions using RANS. In, Maritime Industry, Ocean Engineering and Coastal Resources: Proceedings of the 12th International Congress of the International Maritime Association. 12th International Maritime Association of the Mediterranean Congress (IMAM 2007) London, UK, Taylor and Francis, 77-83. (Balkema--Proceedings and Monographs in Engineering, Water and Earth Sciences, Volume 1: Marit).

Querard, A.B.G., Temarel, P. and Turnock, S.R. (2008) A RANS approach to hydrodynamic and hydroelastic responses of a flexible barge. In, Proceedings of 8th International Conference on Hydrodynamics (ICHD'08), Nantes, France, 30 Sep - 03 Oct 2008. , 493-504.

Querard, A.B.G. and Wilson, P.A. Royal Institution of Naval Architects (2007) Aerodynamic of modern square head sails: a comparative study between wind-tunnel experiments and RANS simulations. The Modern Yacht, 2007, 107-114. (doi:10.3940/rina.tmy.2007.1).

Querard, A.B.G. and Wilson, P.A. (2007) Aerodynamic of modern square head sails: a comparative study between wind-tunnel experiments and RANS simulations. International Journal of Small Craft Technology, 147, (B1)

Querard, A.B.G. and Wilson, P.A. (2010) A comparative study between wind-tunnel experiments and RANS simulations of modern square headed main sails. International Journal of Small Craft Technology, 151, (B1), 1-10. (doi:10.3494/rina.ijsct.2010.b1.82).

Quérard, A.B.G., Temarel, P and Turnock, S.R. (2009) The hydrodynamics of ship-like sections in heave, sway, and roll motions predicted using an unsteady Reynolds-averaged Navier–Stokes method. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 223, (2), 227-238. (doi:10.1243/14750902JEME114).

Quérard, Aymeric, Temarel, Pandeli and Turnock, Steve (2008) Influence of viscous effects on the hydrodynamics of ship- like sections undergoing symmetric and anti-symmetric motions, using RANS. In, 27th International Conference on Offshore Mechanics and Arctic Engineering, Estoril, Portugal, 15 - 20 Jun 2008. Portugal, American Society of Mechanical Engineers10pp.

R

Radojčić, D. (1985) An approximate method for calculation of resistance and trim of the planing hulls. Southampton, UK, University of Southampton, 30pp. (Ship Science Reports, (23) ).

Radojčić, D. (1985) Optimal preliminary propeller design using nonlinear constrained mathematical programming technique. Southampton, UK, University of Southampton, 24pp. (Ship Science Reports, (21) ).

Rattanasiri, Pareecha, Wilson, P.A. and Phillips, A.B. (2014) Numerical investigation of a fleet of self-propelled AUVs. Ocean Engineering, 80c, 25-35. (doi:10.1016/j.oceaneng.2014.02.001).

Rattanasiri, Pareecha, Wilson, P.A. and Phillips, A.B. (2012) Numerical investigation of the drag of twin prolate spheroid hulls in various longitudinal and transverse configurations. In, AUV2012, Kuala Lumpur, MY, 04 - 05 Dec 2012.

Rattanasiri, Pareecha, Wilson, P.A. and Phillips, A.B. (2012) Numerical investigation of the influence of propeller to the interference drag of twin prolate spheroids at various longitudinal offsets and transverse separations. In, USYS'12: 4th International Conference on Underwater System Technology , Southampton, GB,

Rihan, Dominic, O'Regan, Noel and Deakin, Barry (2010) The Development of a "Green Trawler". In, E-Fishing: Fishing Vessel Energy Efficiency. 2nd International Symposium on Fishing Vessel Energy Efficiency , Vigo, ES, 22 - 24 May 2010. e-fishing7pp.

Ring, D. and Shenoi, R.A. (2000) Application of SADT to decompose ship design in a production context. In, Proceedings of the SNAME Ship Production Symposium, Wilhelmsburg, USA, Aug 2000.

Ring, D. and Shenoi, R.A. (2000) Evaluation of an analysis method used to decompose ship systems design. In, Proceedings of the International Naval Engineering Conference 2000, Hamburg, Germany, Mar 2000. , 199-206.

Ring, D. and Shenoi, R.A. (2000) Innovative product development & structured decomposition techniques for design processes. In, Proceedings of the RINA Conference on European Shipbuilding in the 21st Century, London, UK, Dec 2000. , 6.1-6.16.

Ring, D. and Shenoi, R.A. (2000) Use of structured definition techniques to decompose the design process vis-a-vis producibility considerations. In, Proceedings of the 7th International Marine Design Conference, Kyongju, Korea, May 2000. , 527-538.

Ring, D., Shenoi, R.A. and Courts, M. (2001) Application of goal tree - success tree (GTST) technique to decompose ship design in a production context. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215, (1), 79-92.

Roberton, D.M.V., Shenoi, R.A., Boyd, S.W. and Austen, S. (2009) A plausible method for fatigue life prediction of boats in a data scarce environment. In, 17th International Conference on Composite Materials (ICCM-17), Edinburgh, UK, 27 - 31 Jul 2009. (Submitted).

Ruiz, Simón, Font, Jordi, Griffiths, G. and Castellón, A. (2002) Estimation of heading gyrocompass error using a GPS 3DF system: impact on ADCP measurements. Scientia Marina, 66, (4), 347-354.

Rycroft, N.C. and Turnock, S.R. (1998) Hybrid cell finite volume Euler solutions of flow around a main-Jib sail using an IBM SP2. In, Satofuka, N., Ecer, A., Periaux, J. and Fox, P. (eds.) Parallel Computational Fluid Dynamics '97: Recent Developments and Advances Using Parallel Computers - Proceedings of the Parallel CFD Conferences, Manchester, United Kingdom, 19-23 May 1997. Parallel Computational Fluid Dynamics '97: Recent Developments and Advances Using Parallel Computers Amsterdam, Netherlands, Elsevier, 263-272.

Rycroft, N.C. and Turnock, S.R. (1997) Three-dimensional multiblock grid generation: fleximesh. Southampton, UK, University of Southampton, 66pp. (Ship Science Reports, (101) ).

S

Sampathkumar, Narasimhan (2005) Three dimensional geometrical and material nonlinear finite element analysis of adhesively bonded joints for marine structures. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 245pp.

Santos, F.M., Temarel, P. and Guedes Soares, C. (2009) Modal analysis of a fast patrol boat made of composite material. Ocean Engineering, 36, (2), 179-192. (doi:10.1016/j.oceaneng.2008.09.013).

Santos, F.M., Temarel, P. and Guedes Soares, C. (2009) On the limitations of two- and three-dimensional linear hydroelasticity analyses applied to a fast patrol boat. Journal of Engineering for the Maritime Environment, 223, (3), 457-478. (doi:10.1243/14750902JEME152).

Satchwell, C.J. (1987) Aerodynamic interaction between an aerofoil and a freeboard superstructure. Southampton, UK, University of Southampton, 41pp. (Ship Science Reports, (31) ).

Satchwell, C.J. (1989) An aerofoil design method for viscous flows. Southampton, UK, University of Southampton, 36pp. (Ship Science Reports, (39) ).

Satchwell, C.J. (1985) Development of a two dimensional flow test section for a wind tunnel and its use with a hybrid flapped multiplane. Southampton, UK, University of Southampton, 24pp. (Ship Science Reports, (22) ).

Satchwell, C.J. (1984) The evaluation of wind power for commercial vessels. Southampton, UK, University of Southampton, 20pp. (Ship Science Reports, (16) ).

Satchwell, C.J. (1986) Marine aerofoil motion damping and related propulsive benefits. Southampton, UK, University of Southampton, 42pp. (Ship Science Reports, (27) ).

Satchwell, C.J. (1984) The measurement of structural properties of sailcloth. Southampton, UK, University of Southampton, 35pp. (Ship Science Reports, (17) ).

Satchwell, C.J. (1986) The need for windship research in Europe. Southampton, UK, University of Southampton, 12pp. (Ship Science Reports, (25) ).

Satchwell, C.J. (1986) Preliminary analysis of log data from the Fiji windship 'Cagidonu'. Southampton, UK, University of Southampton, 27pp. (Ship Science Reports, (24) ).

Sawade, Caleb, Turnock, Stephen, Forrester, Alexander and Toward, Martin (2012) Improved rehabilitation and training techniques through the use of motion simulation – core strength conditioning for elite rowers. Procedia Engineering, 34, 646-651. (doi:10.1016/j.proeng.2012.04.110).

Saydan, Deniz . (2006) Damage stability of ships as a safety criterion for optimisation tools. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 317pp.

Scarponi, M, Conti, P, Shenoi, R.A. and Turnock, S.R. (2008) Interactions between yacht-crew systems and racing scenarios combining behavioural models with VPPS. Transactions of the Royal Institution of Naval Architects Part B: International Journal of Small Craft Technology, 150, (B1), 11-18.

Scarponi, M., Conti, P., Shenoi, R.A. and Turnock, S.R. (2007) Including human performance in the dynamic model of a sailing yacht: a matlab-simulink based tool. In, Modern Yacht, Southampton, UK, 11 - 12 Oct 2007. London, UK, The Royal Institution of Naval Architects, 143-156.

Scarponi, M., Conti, P., Turnock, S.R. and Shenoi, R.A. (2006) An improved approach for sail design based on the use of design of experiment techniques. In, Proceedings of the International Conference on Ship and Shipping Research, NAV 2006. International Conference on Ship and Shipping Research, NAV 2006 Genoa, Italy, Centro per gli Studi di Technica Navale.

Scarponi, M., McMorris, T., Shenoi, R.A., Turnock, S.R. and Conti, P. (2007) Robo-Yacht: a human behaviour-based tool to predict the performances of yacht-crew systems. In, 12th European Congress of Sport Psychology (FEPSAC 2007): Sport and Exercise Psychology Bridges Between Disciplines and Cultures, Halkidiki, Greece, 04 - 09 Sep 2007. Greece, University of Thessaly3pp.

Scarponi, M., Shenoi, R.A., Turnock, S.R. and Conti, P. (2006) Interactions between yacht-crew systems and racing scenarios combining behavioral models with VPPs. In, Proceedings of the 19th International HISWA Symposium on Yacht Design and Yacht Construction. 19th International HISWA Symposium on Yacht Design and Yacht Construction Amsterdam, The Netherlands, Handel en Industrie op het Gebied van Scheepsbouw en Watersport, 109-121.

Scarponi, M., Turnock, S.R. and Shenoi, R.A. (2004) Numerical simulations of mini 6.50 composite masts. Southampton, UK, University of Southampton, 49pp. (Ship Science Reports, (131) ).

Scarponi, Matteo, Shenoi, R. Ajit, Turnock, Stephen R. and Conti, Paolo (2007) A combined ship science-behavioural science approach to create a winning yacht-sailor combination. In, The 18th Chesapeake Sailing Yacht Symposium, Annapolis, USA, 02 - 03 Mar 2007. Annapolis, USA, Society of Naval Architects and Marine Engineers11pp.

Schreier, Sebastian, Godderidge, Bernhard, Paschen, Mathias, Turnock, Stephen, Tan, Ming Yi and Cowlan, Nicholas (2009) Assessment of transient sloshing due to encounter of an LNG carrier with a steep wave. In, 28th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2009), Honolulu, USA, 31 May - 05 Jun 2009. USA, American Society of Mechanical Engineers10pp.

Shaw, Richard (2005) Editorial. What is a ship in maritime law? Journal of International Maritime Law, 11, (4), 247-249.

Shenoi, Ajit and Blake, James (2011) Reliability engineering for composites. In, MBDA Workshop on Probabilistic Design, Hatfield, GB,

Shenoi, R.A. (2001) Damage modelling in tee connections in FRP ships. In, Proceedings of the 22nd SAMPE Europe International Conference. 22nd SAMPE Europe International Conference on 'Making a Difference with Innovative Materials and Processes' Paris, France, Society for the Advancement of Material and Process Engineering, 451-464.

Shenoi, R.A. (1990) Structural producibility considerations at a preliminary design level. Southampton, UK, University of Southampton, 23pp. (Ship Science Reports, (40) ).

Shenoi, R.A., Blake, J.I.R., Boyd, S. and Mawella, J. (2006) Damage mechanics of FRP ship structures. In, Proceedings of the International Conference on Ship and Shipping Research, NAV 2006. International Conference on Ship and Shipping Research, NAV 2006 Genoa, Italy, Centro per gli Studi di Technica Navale, 15pp.

Shenoi, R.A., Conti, P, Turnock, S.R. and Scarponi, M (2006) Mini 6.50 Mast optimisation using a design of experiment approach and finite element analysis simulations. Transactions of the Royal Institution of Naval Architects Part B: International Journal of Small Craft Technology, 148, (B1), 41-49.

Shenoi, R.A., Dulieu-Barton, J.M., Jeong, H.K., Winkle, I.E., Day, A.H. and Boyd, S.W. (2002) Use of pre-formed composites for cost-effective fast marine craft construction. , University of Southampton

Shenoi, R.A. and Groves, A. (2005) Materials and structures research thrusts: recommendations for the maritime environment. Southampton, UK, University of Southampton, 30pp. (Ship Science Reports, (139) ).

Shenoi, R.A. and Hawkins, G.L. (1993) Large deflection behaviour of GRP panels with attachments. Southampton, UK, University of Southampton, 155pp. (Ship Science Reports, (68) ).

Shenoi, R.A. and Hawkins, G.L. (1991) Large deflection behaviour of grp panels with attachments: a preliminary study. Southampton, UK, University of Southampton, 33pp. (Ship Science Reports, (47) ).

Shenoi, R.A. and Hawkins, G.L. (1996) Micromechanics approaches to predict damage in FRP composite laminates. Southampton, UK, University of Southampton, 18pp. (Ship Science Reports, (97) ).

Shenoi, R.A., Scarponi, M., Turnock, S.R. and Conti, P. (2006) Combining behavioral models with VPPs to derive a winning yacht-sailor combination. In, Small Craft 2006: An International Conference on Small Craft Related Sciences and Engineering, Bodrum, Turkey, 16 - 18 Nov 2006.

Shenoi, R.A. and Wang, R.A. (2001) An analytical solution to the design of tee connections in FRP ships. In, Proceedings of the of the 8th International Symposium on the Practical design of Ships and Mobile Offshore Units (PRADS 2001), Shanghai, China, Sep 2001. , 339-1344.

Shenoi, Ramanand Ajit (2006) Modelling structural capability in FRP ship structures. Schiffbauforschung, 45, (1), 46-58.

Sheridan, J.A., Shenoi, R.A., Hudson, D.A. and Neill, Alex (2011) Why is it harder to design a beautiful cruise liner than it is to design a beautiful work boat? In, RINA International Conference on Marine Design, Coventry, GB, 14 - 15 Sep 2011. 5pp.

Simpson, John and Howlett, Darryl, Saferworld (1995) Nuclear proliferation and control. In, Proliferation and Export Controls: an Analysis of Sensitive Technologies and Countries of Concern. London, UK, Deltac, 3-28.

Smith, B.J, Blake, J.I.R and Boyd, S.W. (2009) The development of a bio-inspired method to recover energy from unsteady flow. Southampton,UK, University of Southampton, 194pp. (Ship Science Reports, (146) ).

Sobey, A., Blake, J.I.R. and Shenoi, R.A. (2009) Optimisation approaches to design synthesis of marine composite structures. Schiffsteknik, 56, (1), 24-30.

Sobey, A.J., Blake, J.I.R and Shenoi, R.A. (2014) A rapid method for reliability analysis of composite tophat stiffened structures using a first principles method and design rules. Transactions of the Royal Institution of Naval Architects - The International Journal of Maritime Engineering, 156, 1-28.

Sobey, A.J., Blake, J.I.R. and Shenoi, R.A. (2013) Monte Carlo reliability analysis of tophat stiffened composite plate structures under out of plane loading. Reliability Engineering and System Safety, 110, 41-49. (doi:10.1016/j.ress.2012.08.011).

Sobey, A.J., Blake, J.I.R. and Shenoi, R.A. (2013) Optimisation of composite boat hulls using first principles and design rules. Ocean Engineering, 65, 62-70. (doi:10.1016/j.oceaneng.2013.03.001).

Spenkuch, T., Turnock, S.R., Wright, A.M. and Shenoi, R.A. (2008) The use of CFD in modelling blanketing effects for yacht race simulations. In, 11th Numerical Towing Tank Symposium, Brest, France, 07 - 09 Sep 2008. Brest, France, ENSIETA, 126-131.

Spenkuch, Thomas, Turnock, Stephen, Scarponi, Matteo and Shenoi, Ajit (2008) Improvements to a sailing VR simulator environment for assessing and improving helm performance. In, Estivalet, Margaret and Brisson, Pierre (eds.) The Engineering of Sport 7. 7th ISEA Conference 2007 , Springer, 65-76.

Spenkuch, Thomas, Turnock, Stephen, Scarponi, Matteo and Shenoi, Ajit (2008) Lifting line method for modelling covering and blanketing effects for yacht fleet race simulation. In, 3rd High Performance Yacht Design Conference, Auckland, New Zealand, 02 - 04 Dec 2008. Auckland, New Zealand, Royal Institution of Naval Architects, 111-120.

Spenkuch, Thomas, Turnock, Stephen, Scarponi, Matteo and Shenoi, Ajit (2010) Real time simulation of tacking yachts: how best to counter the advantage of an upwind yacht. Procedia Engineering, 2, (2), 3305-3310. (doi:10.1016/j.proeng.2010.04.149 ).

Spenkuch, Thomas, Turnock, Stephen R., Scarponi, Matteo and Shenoi, R. Ajit (2011) Modelling multiple yacht sailing interactions between upwind sailing yachts. Journal of Marine Science and Technology, 16, (2), 115-128. (doi:10.1007/s00773-010-0115-9).

Speyer, A.J., Wood, R.J.K., Stokes, K.R. and Sturgeon, A.J. (2000) Corrosion of aluminium based coatings for use in marine pipework. In, EUROCORR 2000. UK, Institute of Materials.

Squires, M.A. and Wilson, P.A. (1992) An investigation into translating pulsating Green' functions for ship motion prediction. In, 4th International Conference on Computer Aided Design Manufacture and Operation in the Marine and Offshore Industries (CADMO 92). Southampton, UK, Computational Mechanics Publications, 306-322.

Stansfield, Kate, Smeed, David A., Gasparini, Gian Pietro, McPhail, Stephen, Millard, Nick, Stevenson, Peter, Webb, Andy, Vetrano, Anna and Rabe, Benjamin (2001) Deep-sea, high-resolution, hydrography and current measurements using an autonomous underwater vehicle: the overflow from the Strait of Sicily. Geophysical Research Letters, 28, (13), 2645-2648. (doi:10.1029/2000GL012770).

Stanton, Neville A. (2013) Representing distributed cognition in complex systems: how a submarine returns to periscope depth. [in special issue: Beyond Human-Centred Automation] Ergonomics, 57, (3), 403-418. (doi:10.1080/00140139.2013.772244). (PMID:23510256).

Steenson, L.V., Phillips, A.B., Furlong, M., Rogers, E. and Turnock, S.R. (2011) Maneuvering of an over-actuated autonomous underwater vehicle using both through-body tunnel thrusters and control surfaces. In, 17th International Undersea Untethered Submersible Technology Conference. Lee, United States, Autonomous Underwtaer Vehicles Applications Center.

Steenson, Leo V. (2011) Preliminary results of a hover capable AUV attempting transitional flight. In, 17th International Unmanned Untethered Submersible Technology Conference. Lee, United States, Autonomous Undersea Vehicle Applications Center.

Steenson, Leo V., Phillips, A.B., Rogers, E., Furlong, M. and Turnock, S.R. (2012) Experimental Verification of a Depth Controller using Model Predictive Control with Constraints onboard a Thruster Actuated AUV. In, IFAC Workshop on Navigation, Guidance and Control of Underwater Vehicles (NGCUV’2012), Porto, Portugal, 6pp.

Steenson, Leo V., Phillips, Alexander B., Rogers, Eric, Furlong, Maaten E. and Turnock, Stephen R. (2011) Control of an AUV from thruster actuated hover to control surface actuated flight. In, Specialists Meeting AVT-189/RSM-028 Assessment of Stability and Control Prediction Methods for NATO Air & Sea Vehicles, Portsdown, United Kingdom, 12 Oct - 14 Nov 2011. 12pp.

Steenson, Leo V., Phillips, Alexander B., Turnock, Stephen R., Furlong, Maaten and Rogers, Eric (2012) Effect of measurement noise on the performance of a depth and pitch controller using the model predictive control method. In, 2012 IEEE/OES Autonomous Underwater Vehicles (AUV). Piscataway, US, Institute of Electrical and Electronics Engineers, 1-8. (doi:10.1109/AUV.2012.6380732).

Stevenson, P. (2007) Launch and recovery of autonomous underwater vehicles in Polar regions. In, Griffiths, G. and Collins, K. (eds.) Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments. Proceedings of the International Masterclass, 28-30 March 2006, National Oceanography Centre, Southampton, UK. Masterclass in AUV Technology for Polar Science: Collaborative Autosub Science in Extreme Environments London, UK, Society for Underwater Technology, 79-88.

Stevenson, P. (2009) Reliability Case Notes No. 5: Report on water leak in Autosub6000 charge blanking plug. Burton blank No 82530-12-5502-3212-0000 NR. Southampton, UK, National Oceanography Centre Southampton, 7pp. (National Oceanography Centre Southampton Research and Consultancy Report, 66).

Stevenson, P. and Graham, D. (2003) Advanced materials and their influence on the structural design of AUVs. In, Griffiths, G. (ed.) The technology and applications of autonomous underwater vehicles. Abingdon, UK, Taylor & Francis, 77-91. (Ocean Science and Technology 2).

Stevenson, P., Griffiths, G. and Webb, A.T. (2002) The experience and limitations of using manganese alkaline primary cells in a large operational AUV. In, Proceedings of the 2002 Workshop on Autonomous Underwater Vehicles. 2002 Workshop on Autonomous Underwater Vehicles USA, Institute of Electrical and Electronics Engineers, 27-34. (doi:10.1109/AUV.2002.1177198).

Stratmann, J.P., Wilson, P.A., Molland, A.F. and Courts, M.D. (2006) Project management of early stage warship design. The Transactions of The Royal Institution of Naval Architects, International Journal of Maritime Engineering,, 148, (A2), 1-14. (doi:10.3940/rina.ijme.2006.a2.7306).

Stratmann, Johannes Philipp (2006) Engineering management of early stage warship design. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 258pp.

Stuck, Arthur, Turnock, Stephen and Bressloff, Neil (2004) An evaluation of the RANS method for the prediction of steady ship rudder performance compared to wind tunnel measurements. Southampton, UK, University of Southampton, 72pp. (Ship Science Reports, (130) ).

Subbiah, K., Chaplin, J.R. and Irani, M. (1995) Loading on a vertical cylinder near mean water level in long-and-short-crested waves. In, ISOPE 95, 5th International Offshore & Polar Engineering Conference; The Hague, The Netherlands. Cupertino, US, International Society of Offshore and Polar Engineers, 324-331.

Sutherland, L. and Wilson, P.A. (1994) Windsurfer fin hydrodynamics. In, Marine, Offshore and Ice Technology. CADMO 94: Computer-aided Design, Manufacture and Operation in the Marine and Offshore Industries Southampton, UK, Computational Mechanics Publications, 51-58.

Suzuki, H., Riggs, H.R., Fujikubo, M., Shugar, T.A., Seto, H., Yasuzawa, Y., Bhattacharya, B., Hudson, D.A. and Shin, H. (2007) Very large floating structures. In, Proceedings of the ASME 26th International Conference on Offshore Mechanics and Arctic Engineering Volume 2: Structures, Safety and Reliability; Petroleum Technology Symposium. 26th International Conference on Offshore Mechanics and Arctic Engineering (OMAE2007) Mexico City, MX, American Society of Mechanical Engineers, 597-608. (doi:10.1115/OMAE2007-29758).

Sweet, G.W. (1993) Single snapshot frequency source location with a hydrophone array of uncertain shape: part 1. Southampton, UK, University of Southampton, 4pp. (Ship Science Reports, (59) ).

Sweet, G.W. (1992) With a single snapshot a target is located with hydrophones in uncertain locations, with NSR = 10 x log (number of hydrophones). Southampton, UK, University of Southampton, 7pp. (Ship Science Reports, (60) ).

T

Tan, M., Xiong, Y.P., Xing, J.T. and Toyoda, M. (2006) A numerical investigation of natural characteristics of a partially filled tank using a substrutcure method. In, Hydroelasticity '2006: Hydroelasticity in Marine Technology, Wuxi, China, 10 - 14 Sep 2006. Beijing, China, National Defense Industry Press, 181-190.

Tan, Mingyi, Xiong, Ye Ping and Xing, Jing Tang (2009) Dynamic response analysis of an onshore LNG-storage tank interaction system sub-ject to impact or earthquake loads. In, Proceedings of the Sixteenth International Congress on Sound and Vibration - ICSV16. 16th International Congress on Sound and Vibration - ICSV16 Krakow, Poland, International Institute of Acoustics and Vibration, (IIAV), 1-8. (ICSV16-539).

Tang, A. and Wilson, P.A. (1993) LFE stabilisation (final report). Southampton, UK, University of Southampton, 172pp. (Ship Science Reports, (61) ).

Tang, A. and Wilson, P.A. (1992) LFE stabilisation using the rudder. In, Manoeuvring and Control of Marine Craft. 2nd International Conference on Manoeuvring and Control of Marine Craft (MCMC 92) Southampton, UK, Computational Mechanics, 379-392.

Tang, A. and Wilson, P.A. (1992) Ship stabilisation using lateral force estimator. International Shipbuilding Progress, 39, (419), 267-278.

Tang, A.S.T., Crossland, P.C. and Wilson, P.A. (1993) Stabilising a frigate using lateral force. In, Ship control systems : proceedings symposium. 10th International Ship Control Systems Symposium Ottawa, Canada, National Defence.

Taunton, D.J. and Hudson, D.A. (2009) Design of high performance craft from a human factors perspective. In, IMDC 2009: 10th International Marine Design Conference, Trondheim, Norway, 26 - 29 May 2009. Trondheim, Norway, Tapir Academic Press12pp, 1010-1021.

Taunton, D.J., Hudson, D.A. and Shenoi, R.A. (2011) Characteristics of a series of high speed hard chine planing hulls - part II: performance in waves. International Journal of Small Craft Technology, 153, B1-B22. (doi:10.3940/rina.ijsct.2011.b1.97).

Taunton, D.J., Hudson, D.A. and Shenoi, R.A. (2010) Characteristics of a series of high speed hard chine planing hulls - part 1: performance in calm water. International Journal of Small Craft Technology, 152, 55-75. (doi:10.3940/rina.ijsct.2010.b2.96).

Temarel, P. (2008) Hydroelasticity of ships: taking stock and moving forward. In, 22nd Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures (TEAM 2008), Istanbul, Turkey, 06 - 09 Oct 2008.

Temarel, P. (2007) Loads on ships and offshore structures. In, The 26th International Conference on Offshore Mechanics and Arctic Engineering (OMAE 2007), San Diego, USA, 10 - 15 Jun 2007. USA, The American Society of Mechanical Engineers10pp.

Temarel, P. (2007) Slamming loads and whipping vibrations. In, Advanced School on Wave Loads on Ships, Lyngby, Denmark, 27 - 29 Aug 2007. Lyngby, Denmark, Danish Centre for Applied Mathematics and Mechanics74pp.

Temarel, P., Chen, X.B., Engle, A., Hermanski, G., Jankowski, J., Kapsenberg, G., Kawabe, H., Kruger, S., Kukkanen, T., Mavrakos, S., Pastoor, W., Pedersen, B., Ren, H.L., Sebastiani, L. and Xia, J., ISSC Committee I.2 (2006) [Report of] ISSC Committee: Loads. In, Frieze, P.A. and Shenoi, R. Ajit (eds.) Proceedings of the 16th International Ship and Offshore Structures Congress (v.1). 16th International Ship and Offshore Structures Congress (ISSC) Southampton, UK, University of Southampton, 68pp.

Temarel, P., Chen, X.B., Ergin, A., Hermanski, G., Hermundstad, O.A., Hirdaris, S.E., Huijsmans, R., Iijima, K., Mavrakos, S.A., Petrie, G.L., Ren, H., Sebastiani, L. and Yu, B.S. (2009) Report of Committee I.2: Loads. In, Jang, C.D. and Hong, S.Y. (eds.) Proceedings of the 17th International Ship and Offshore Structures Congress. , , 127-210.

Temarel, P. and Hudson, D.A. (1996) Report on contract SSDH300023. Trimaran seakeeping code validation - phase 1. Prediction of heave, pitch and roll motions for three trimaran models. Southampton, UK, University of Southampton, 48pp. (Ship Science Reports, (95) ).

Temarel, P. and Miao, S.H. Defence Evaluation and Research Agency (2000) Development of the software THAFTS (trimaran wave loading). UK, Defence Evaluation and Research Agency, 61pp.

Temarel, Pandeli (2009) Guest editorial. Fluid-structure interactions: a special issue in honour of Professor W. Geraint Price. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 223, (3), i-ii.

Theobald, P.D., Robinson, S.P., Lepper, P.A., Hayman, G., Humphrey, V.F., Wang, L. and Mumford, S.E. (2011) The measurement of underwater noise radiated by dredging vessels during aggregate extraction operations. In, Fourth International Conference on Underwater Acoustic Measurements, Technologies and Results, Kos, Greece,

Thornton, B., Ura, T., Nose, Y. and Turnock, S. (2006) Zero-G class underwater robots and unrestricted attitude control using control moment gyros. In, IEEE Oceans'06 Asia Pacific IEEE, Singapore, 16 - 19 May 2006. IEEE Oceanic Engineering Society.

Thornton, B., Ura, T., Nose, Y. and Turnock, S. (2007) Zero-G class underwater robots: unrestricted attitude control using control moment gyros. IEEE Journal of Oceanic Engineering, 32, (3), 565-583. (doi:10.1109/JOE.2007.899274).

Thornton, B., Ura, T., Nose, Y. and Turnock, S.R. (2006) Development of Zero-G Underwater Robots:Unrestricted attitude control using control moment gyros. Seisan-Kenkyu, 58, (2), 175-178.

Thornton, Blair (2006) The development of Zero-G class underwater robots: unrestricted attitude control using control moment gyros. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 141pp.

Thornton, Blair, Ura, Tamaki, Nose, Yoshiake and Turnock, Stephen R. (2005) Internal actuation of underwater robots using control moment gyros. In, Oceans 2005 - Europe. Oceans '05 Conference USA, Institute of Electrical and Electronics Engineers, 591-598. (doi:10.1109/OCEANSE.2005.1511781).

Tian, Zhe, Yan, Xinping and Xiong, Yeping (2012) Turbocharged two-stroke diesel engine of large vessels modeling and simulation. Applied Mechanics and Materials, 235, 233-238. (doi:10.4028/www.scientific.net/AMM.235.233).

Tong, T.K and Wilson, P.A. (1986) Finite Element Analysis by microcomputer. The Naval Architect, 137, 267-278.

Townsend, N.C. (2008) Influencing and influences of marine vessel motions. University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Townsend, N.C., Coe, T., Wilson, P.A. and Shenoi, R.A. (2012) Understanding planing craft motion exposures and mitigation strategies. Ocean Engineering, 42, 126-134. (doi:10.1016/j.oceaneng.2012.01.007).

Townsend, N.C., Coe, T.E. and Wilson, P.A. et al. (2012) High speed marine craft motion mitigation using flexible hull design. Ocean Engineering, 42, 126-134. (doi:10.1016/j.oceaneng.2012.01.007).

Townsend, N.C., Murphy, A.J. and Shenoi, R.A. (2006) A new active gyrostabiliser system for ride control of marine vehicles. Ocean Engineering, 34, (11-12), 1607-1617. (doi:10.1016/j.oceaneng.2006.11.004). (Submitted).

Townsend, N.C. and Shenoi, R.A. (2013) Control strategies for marine gyrostabilizers. IEEE Journal of Oceanic Engineering, 1-13. (doi:10.1109/JOE.2013.2254591).

Townsend, N.C., Wilson, P.A. and Austen, S (2009) Sea-keeping characteristics of a model rib in head seas. Transactions of The Royal Institution of Naval Architects. Part A, International Journal of Maritime Engineering, 151, (A1), 35-44. (doi:10.3840/rina.ijme.2009.a1.141).

Townsend, N.C., Wilson, P.A. and Austen, S. (2008) What influences rigid inflatable boat motions? Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 222, (4), 207-217. (doi:10.1243/14750902JEME115).

Townsend, Nicholas and Shenoi, Ajit (2012) A gyroscopic wave energy recovery system for marine vessels. IEEE Journal of Oceanic Engineering, 37, (2), 271-280. (doi:10.1109/JOE.2012.2185880).

Toyota, M., Xing, J.T., Xiong, Y.P. and Tan, M. (2006) An experimental study on vibration characteristics of a thin spherical tank–water interaction system. In, Proceedings of Hydroelasticity '2006: Hydroelasticity in Marine Technology. Hydroelasticity '2006: Hydroelasticity in Marine Technology Beijing, China, National Defense Industry Press, 191-198.

Tran, T., Harris, C.J. and Wilson, P.A. (2000) Marine collision avoidance expert system. In, Proceedings of Intelligent Systems & Control 2000, Honolulu, USA, 14 - 16 Aug 2000. , 27-32.

Tran, T., Harris, C.J. and Wilson, P.A. (1999) Maritime avoidance navigation totally integrated system. In, FUSION'99, San Diego, USA, Sep 1999. San Diego, USA, 10pp.

Tran, T., Harris, C.J. and Wilson, P.A. (2000) Vessel management expert system. In, European Conference Marine Technology Industry & Simulation, Nantes, France, 29 - 30 Nov 2000. , 140-149.

Tran, T., Harris, C.J. and Wilson, P.A. (2002) A vessel management expert system. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 216, (2), 161-771. (doi: 10.1243/147509002762224379).

Trethewey, K.R., Wood, R.J.K., Puget, Y. and Roberge, P.R. (1998) Development of a knowledge-based system for materials management. Materials & Design, 19, (1-2), 39-56. (doi:10.1016/S0261-3069(98)00010-7).

Trimarchi, D. and Rizzo, C.M. (2009) A FEM-Matlab code for fluid-structure interaction coupling with application to sail aerodynamics of yachts. In, Gören, Ömer, Okan, Barbaros and Karakaş, Şafak C. (eds.) 13th International Congress of International Maritime Association of Mediterranean (IMAM2009), Towards the Sustainable Marine Technology. 12 – 15 October, 2009, İstanbul, Turkey. Proceedings Vol.III. 13th International Congress of International Maritime Association of Mediterranean Istanbul, Turkey, ITU Faculty of Naval Architecture and Ocean Engineering, 907-916.

Trimarchi, D., Turnock, S.R., Chapelle, D. and Taunton, D. (2009) Fluid-structure interactions of anisotropic thin composite materials for application to sail aerodynamics of a yacht in waves. In, 12th Numerical Towing Tank Symposium, Cortona, Italy, 04 - 06 Oct 2009. Cortona, Italy, 6pp.

Trimarchi, Daniele, Turnock, S.R., Taunton, D.J. and Chapelle, Dominique (2010) The use of shell elements to capture sail wrinkles, and their influence on aerodynamic loads. In, Second International Conference on Innovation in High Performance Sailing Yachts, Lorient, FR, 30 Jun - 01 Jul 2010. 12pp.

Tsimplis, Michael (2004) Alien species stay home: The International Convention for the Control and Management of Ships' Ballast Water. International Journal of Coastal and Marine Law, 19, (4), 411-482. (doi:10.1163/1571808053310116).

Turnock, S.R. (1990) Computer aided design and numerically controlled manufacture of a split mould for a composite model ship propeller. Southampton, UK, University of Southampton, 109pp. (Ship Science Reports, (42) ).

Turnock, S.R. (2001) Effective design of small craft propulsion systems. In, Proceedings of International Workshop on Small Craft, Surabaya, Indonesia, 05 - 06 Jul 2001. 10pp.

Turnock, S.R. (1992) Lifting surface method for modelling ship rudders and propellers. Southampton, UK, University of Southampton, 93pp. (Ship Science Reports, (50) ).

Turnock, S.R. (1995) Minimising the environmental impact of shipping: clean ships for a new century. In, Proceedings of MARIENV'95. International Conference on Technologies for Marine Environment Preservation Tokyo, Japan, Society of Naval Architects of Japan, 533-540.

Turnock, S.R. (1993) Parallel algorithm for surface panel analysis. Southampton, UK, University of Southampton, 65pp. (Ship Science Reports, (63) ).

Turnock, S.R. (2004) Parametric definition of complex multi-appended bodies for marine and aerospace application: a user guide to Adaptflexi. Southampton, GB, University of Southampton, 29pp. (Ship Science Report, 136).

Turnock, S.R. (1993) Prediction of ship rudder-propeller interaction using parallel computations and wind tunnel measurements. University of Southampton, Ship Science, Doctoral Thesis , 358pp.

Turnock, S.R. (1997) Technical manual and user guide for the surface panel code: PALISUPAN. Southampton, UK, University of Southampton, 66pp. (Ship Science Reports, (100) ).

Turnock, S.R. (1990) A test rig for the investigation of ship propeller/rudder interactions. Southampton, UK, University of Southampton, 90pp. (Ship Science Reports, (45) ).

Turnock, S.R. (1994) A transputer based parallel algorithm for surface panel analysis. Ship Technology Research, 41, (2), 93-104.

Turnock, S.R. (1989) Two-dimensional wind tunnel tests of the SSS series 1 structurally efficient aerofoils for wind turbines. Southampton, UK, University of Southampton, 138pp. (Ship Science Reports, (38) ).

Turnock, S.R. (1992) Validation of a lifting surface method for modelling rudder-propeller interaction. Southampton, UK, University of Southampton, 61pp. (Ship Science Reports, (53) ).

Turnock, S.R., Holroyd, N.J. and Date, J.C. (2001) Appendage design for the America's Cup using CFD. In, European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS--CFD 2001), Swansea, UK, 04 - 07 Sep 2001. 19pp.

Turnock, S.R. and Hughes, A.W. (1997) Evaluation of a CFD code for investigating hull-waterjet flow interaction. In, RINA'97: International Symposium Power, Performance and Operability of Small Craft, Southampton, UK, 15 - 16 Sep 1997. London, UK, Royal Institution of Naval Architects12pp.

Turnock, S.R., Hughes, A.W., Moss, R. and Molland, A.F. (1997) Investigation of hull-waterjet flow interaction. In, Baird, Neil and Jeffs, Andrew (eds.) FAST'97 / fourth International Conference on Fast Sea Transportation, Sydney, Australia, July 21-23, 1997. FAST'97: Fourth International Conference on Fast Sea Transportation South Yarra, Australia, Baird Publications, 51-58.

Turnock, S.R., Keane, A.J., Bressloff, N.W., Nicholls-Lee, R.F. and Boyd, S.W. (2009) Morphing of ‘flying’ shapes for autonomous underwater and aerial vehicles. In, NATO RTO Modelling & Simulation Conference 2009, Lisbon, Portugal, 2009. 19pp, 1-19.

Turnock, S.R., Lewis, S.G., Philips, A.B., Banks, J., Winden, B., Hudson, D.A. and Molland, A.F. (2010) Evaluating the self-propulsion of a container ship in a seastate using computational fluid dynamics. In, William Froude Conference: Advances in Theoretical and Applied Hydrodynamics - Past and Future, Portsmouth, GB, 24 - 25 Nov 2010. 12pp.

Turnock, S.R., Molland, A.F., Barrass, C.B., Derrett, D.R., Bertram, V, Rawson, K.J. and Tupper, E.C. (2008) Chapter 8. Manoeuvring. In, Molland, Anthony F. (ed.) The Maritime Engineering Reference Book: a Guide to Ship Design, Construction and Operation. UK, Butterworth-Heinemann, 578-635.

Turnock, S.R., Pashias, C. and Rogers, E. (2006) Flow feature identification for capture of propeller tip vortex evolution. In, Proceedings of the 26th Symposium on Naval Hydrodynamics. 26th Symposium on Naval Hydrodynamics Rome, IT, INSEAN Italian Ship Model Basin / Office of Naval Research, 223-240.

Turnock, S.R., Pattenden, R.J., Pemberton, R. and Watson, S. (2000) Computation of viscous steady flow around the KRISO tanker (KVLCC2) hull form. In, Gothenburg 2000. A Workshop on Numerical Ship Hydrodynamics, Gothenburg, Sweden, 14 - 16 Sep 2001.

Turnock, S.R., Phillips, A.B., Banks, Joe and Nicholls-Lee, R.F. (2011) Modelling tidal current turbine wakes using a coupled RANS-BEMT approach as a tool for analysing power capture of arrays of turbines. Ocean Engineering, 38, (11-12), 1300-1307. (doi:10.1016/j.oceaneng.2011.05.018).

Turnock, S.R., Phillips, A.B. and Furlong, M. (2008) Urans simulations of static drift and dynamic manoeuvres of the KVLCC2 tanker. In, SIMMAN 2008: workshop on verification and validation of ship manoeuvring Simulation Methods, Lyngby, Denmark, 13 - 17 Apr 2008. Denmark, Force Technology6pp.

Turnock, S.R. and Smithwick, J.E.T. (1998) Practical analysis of the hydrodynamic performance of the Reflex 28 keel and rudder. In, International Conference on the Modern Yacht, Portsmouth, UK, 18 - 19 Mar 1998. London, UK, Royal Institution of Naval Architects17pp.

Turnock, S.R. and Wright, A. (1999) A fully adaptive free surface definition algorithm suitable for modelling unsteady wave flow around floating structures. In, 3rd ASME/JSME Joint Fluids Engineering Conference (FESDSM '99), San Francisco, USA, 18 - 23 Jul 1999. 6pp. (Submitted).

Turnock, S.R., Wright, A.M., Pattenden, R.J. and Pemberton, R. (2000) Adaptive grid flow solutions around a Mariner hull at drift. Proceedings of 3rd Numerical Towing Tank Symposium, 9-13.

Turnock, Stephen and Molland, Anthony (2010) Energy efficiency of ship propulsive systems: rudder-propeller interaction. In, Ship Propulsion Systems Conference, London, UK, 27 - 28 Jan 2010. London, UK, Institute of Marine Engineering Science & Technology30pp.

V

Van de Noort, Robert, Cumby, Brian, Blue, Lucy, Harding, Anthony, Hurcombe, Linda, Hansen, Tom Monrad, Wetherelt, Andy, Wittamore, Jenny and Wyke, Andy (2014) Morgawr: an experimental Bronze Age-type sewn-plank craft based on the Ferriby boats. International Journal of Nautical Archaeology, 1-22. (doi:10.1111/1095-9270.12058).

Veiga, Augusto Elisio Lessa (2006) The analysis of partially separated flow on sail systems using a sectional method. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 224pp.

Veldhuis, Ivo (2007) Application of hydrogen marine systems in high-speed sea container transport. University of Southampton, School of Engineering Sciences, Doctoral Thesis , 236pp.

Velduis, I.J.S., Richardson, R.N. and Stone, H.B.J. (2007) Hydrogen fuel in a marine environment. International Journal of Hydrogen Energy, 32, (13), 2553-2566. (doi:10.1016/j.ijhydene.2006.11.013).

Velduis, I.J.S., Richardson, R.N. and Stone, H.B.J. (2006) A hydrogen fuelled fast marine transport system. In, World Hydrogen Energy Conference (WHEC) 2006, Lyon, France, 13 - 16 Jun 2006. USA, International Assocaition for Hydrogen Energy11pp, 1-11. (Submitted).

Veres, Sandor M., Molnar, Levente, Lincoln, Nicholas and Morice, Colin (2011) Autonomous vehicle control systems – a review of decision making. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225, (2), 155-195. (doi:10.1177/2041304110394727).

van Maanen, B., Coco, G. and Bryan, K.R. (2011) A numerical model to simulate the formation and subsequent evolution of tidal channel networks. Australian Journal of Civil Engineering, 9, (1), 61-71.

W

Wakefield, N.H., Newman, S.J. and Wilson, P.A. (1998) CFD predictions of the influence of external airflow on helicopter operations when operating from ship flight decks. In, International Powered Lift Conference, London, UK, 02 - 04 Sep 1998. London, UK, Royal Aero Society10pp.

Wakefield, N.H., Newman, S.J. and Wilson, P.A. (1998) CFD predictions of the influence of external airflow on helicopter operations when operating from ship flight decks. In, RTO Applied Vehicle Technology Panel Symposium: Fluid Dynamics Problems of Vehicles Operating Near or in the Air-Sea Interface. Neuilly-sur-Seine, France, Research and Technology Organization, 1-10. (RTO Meeting Proceedings).

Wakefield, N.H., Newman, S.J. and Wilson, P.A. (2002) Helicopter flight around a ship's superstructure. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 216, (1), 13-28. (doi:10.1243/0954410021533391).

Walmsley, R. (2003) Buying boats: comparing lifeboats and nuclear submarines. Southampton, UK, University of Southampton, 38pp. (Ship Science Reports, (129) ).

Wang, L, Humphrey, V.F., Robinson, S.P., Theobald, P.D., Lepper, P.A. and Hayman, G. (2011) Measurement of noise source locations in depth from dredging ships with a vertical line array. In, Fourth International Conference on Underwater Acoustic Measurements, Technologies and Results, Kos, Greece, 20 - 24 Jun 2011.

Wang, W., Makarov, G. and Shenoi, R.A. (2003) Investigating high strain rate behaviour of unidirectional composites by a visco-elastic model. In, Proceedings of The International Symposium on Naval Architecture and Ocean Engineering, Shanhai, China, Sep 2003.

Wang, W., Shenoi, R. A. and Cui, W. (2006) Delamination buckling of a curved composite beam subjected to a closing bending moment. Journal of Ship Mechanics, 10, (6), 102-114.

Wang, W. and Shenoi, R.A. (2009) Investigating high strain rate behaviour of unidirectional composites by a visco-elastic model. Journal of Ship Mechanics, 13, (3), 406-415.

Wang, Wei and Xiong, Ye Ping (2014) Minimising the sloshing impact in membrane LNG tank using a baffle. In, Proceedings of the 9th International Conference on Structural Dynamics (EURODYN 2014). EURODYN 2014: 9th International Conference on Structural Dynamics Porto, PT, EURODYN 2014, 3171-3177.

Ward, B. and Wilson, P. A. (1992) Forces on a body of revolution in a vortex flow field. Transactions of The Royal Institution of Naval Architects, Part B, 134, 329-339. (doi:10.3940/rina.trans.1992.19).

Webb, A., Banks, Joe, Phillips, C.W.G., Hudson, D.A., Taunton, D.J. and Turnock, S.R. (2011) Prediction of passive and active drag in swimming. Procedia Engineering, 13, 133-140.

Weddell, Alex S., Zhu, Dibin, Merrett, Geoff V., Beeby, S.P. and Al-Hashimi, B.M. (2012) A practical self-powered sensor system with a tunable vibration energy harvester. In, PowerMEMS 2012, Atlanta, US, 02 - 05 Dec 2012. 4pp. (Submitted).

Weiss, P., Catret Mascarell, J.V., Badica, M., Labbe, D.F.L., Lapierre, L., Brignone, L. and Wilson, P. A. (2003) FREESUB: Modular control system for intervention AUVS (IAUV). In, 13th International Symposium on Unmanned Untethered Submersible Technology, Durham, USA,

Weiss, P., Catret Mascarelli, J.V., Grossnet, D., Brignone, L., Labbe, D.F.L. and Wilson, P.A. (2003) FREESUB: Dynamic stabilization and docking for autonomous underwater vehicles. In, 13th International Symposium on Unmanned Untethered Submersible Technology, Durham, USA,

Weitzenbock, J.R., Shenoi, R.A. and Wilson, P.A. (1994) Characterisation of resin flow through thick laminates in resin transfer mouldings. In, Poursartip, Anoush and Street, Ken (eds.) Proceedings of the Tenth International Conference on Composite Materials. ICCM-10: 10th International Conference on Composite Materials , Woodhead Publishing Limited, 301-308.

Weitzenbock, J.R., Shenoi, R.A. and Wilson, P.A. (1995) Flow front measurement in RTM. In, ICAC'95 - 4th International Conference on Automated Composites, Nottingham, UK, 06 - 07 Sep 1995. Nottingham, UK, IFAC10pp, 307-314.

Weitzenbock, J.R., Shenoi, R.A. and Wilson, P.A. (1999) Measurement of the principal permeability with the channel flow experiment. Polymer Composites, 20, (2), 321-335. (doi:10.1002/pc.10359).

Weitzenbock, J.R., Shenoi, R.A. and Wilson, P.A. (1996) Measurement of three dimensional permeability. In, FPCM'96: Fourth International Conference on Flow Processes in Composite Materials, Aberystwyth, Wales, 09 - 11 Sep 1996. Aberystwyth, Wales, 10pp.

Wellicome, J.F. (1975) A broad appraisal of the economic and technical requisites for a wind driven merchant vessel. Southampton, UK, University of Southampton, 27pp. (Ship Science Reports, (3) ).

Wellicome, J.F. (1999) The design of developable and nearly developable hullforms. Southampton, UK, University of Southampton, 28pp. (Ship Science Reports, (115) ).

Wellicome, J.F. (1981) Slenderbody theory applied to asymmetric bodies fitted with lifting appendages. Southampton, UK, University of Southampton, 49pp. (Ship Science Reports, (8/81) ).

Wellicome, J.F. and Campbell, I.M.C. (1984) The transverse dynamic stability of planing craft. Southampton, UK, University of Southampton, 115pp. (Ship Science Reports, (12) ).

Wellicome, J.F., Molland, A.F., Cic, J. and Taunton, D.J. (1999) Experimental measurements in head seas of the seakeeping characteristics of a fast displacement catamaran of series 64 form. Southampton, UK, University of Southampton, 28pp. (Ship Science Reports, (107) ).

Wellicome, J.F., Molland, A.F., Cic, J. and Taunton, D.J. (1999) Resistance experiments on a high speed displacement catamaran of series 64 form. Southampton, UK, University of Southampton, 20pp. (Ship Science Reports, (106) ).

Wellicome, J.F., Temarel, P., Molland, A.F., Cic, J. and Taunton, D.J. (1999) The design, construction and calibration of a wave buoy for ship model tests in open water. Southampton, UK, University of Southampton, 36pp. (Ship Science Reports, (112) ).

Wellicome, J.F., Temarel, P., Molland, A.F., Cic, J. and Taunton, D.J. (1999) Experimental measurements of the seakeeping characteristics of fast 4.5m displacement catamarans in open irregular seas. Southampton, UK, University of Southampton, 23pp. (Ship Science Reports, (118) ).

Wellicome, J.F., Temarel, P., Molland, A.F., Cic, J. and Taunton, D.J. (1999) Experimental measurements of the seakeeping characteristics of fast displacement catamarans in oblique waves. Southampton, UK, University of Southampton, 34pp. (Ship Science Reports, (111) ).

Wellicome, J.F., Temarel, P., Molland, A.F. and Couser, P.R. (1995) Experimental measurements of hull pressures on fast displacement catamarans during motions in long-crested head-seas. Southampton, UK, University of Southampton, 13pp. (Ship Science Reports, (92) ).

Wellicome, J.F., Temarel, P., Molland, A.F. and Couser, P.R. (1995) Experimental measurements of the seakeeping characteristics of fast displacement catamarans in long-crested head-seas. Southampton, UK, University of Southampton, 71pp. (Ship Science Reports, (89) ).

Wellicome, J.F., Temarel, P., Molland, A.F. and Hudson, D.A. (1995) Theoretical prediction of the seakeeping characteristics of fast displacement catamarans. Southampton, UK, University of Southampton, 22pp. (Ship Science Reports, (93) ).

Wellicome, J.F., Temarel, P., Molland, A.F. and Hudson, D.A. (1999) Theoretical prediction of the seakeeping characteristics of two fast displacement catamarans in oblique seas. Southampton, UK, University of Southampton, 29pp. (Ship Science Reports, (113) ).

Wellicome, J.F., Weynberg, P.A. and Wilson, P.A. (1979) The computer as an aid to preliminary design. In, Reed, T. (ed.) Proceedings of the Third International Offshore Craft Conference. Third International Offshore Craft Conference Elmsford, USA, Maxwell Scientific International, 10pp.

Wellicome, J.F., Wilson, P.A. and Cheng, X. (1994) The commisioning and operation of a horizontal planar motion mechanism. In, 3rd Conference on Marine Craft Maneuvering and Control (MCMC'94), Southampton, UK, 07 - 09 Sep 1994. Southampton, UK, Computational Mechanics Publications12pp, 375-378.

Wellicome, J.F., Wilson, P.A. and Cheng, X. (1997) Experimental and numerical studies of manoeuvring forces on a slender ship. Transactions of The Royal Institution of Naval Architects, 139, 147-156. (doi:10.3940/rina.trans.1997.08).

Wellicome, J.F., Wilson, P.A. and Cheng, X. (1995) Prediction of sway force and yaw moments of slender ships. International Shipbuilding Progress, 42, (431), 259-276.

Wellicome, J.F., Wilson, P.A. and Cheng, X. (1994) Prediction of the manoeuvring forces on a slender ship using slender body theory. Part I: theoretical estimates of forces and moments. Southampton, GB, University of Southampton, 49pp. (Ship Science Reports, (73) ).

Wellicome, J.F., Wilson, P.A. and Cheng, X. (1994) Prediction of the manoeuvring forces on a slender ship using slender body theory. Part II: towing tank tests using planar motion mechanism. Southampton, GB, University of Southampton, 112pp. (Ship Science Reports, (74) ).

Wellicome, J.F., Wilson, P.A. and Cheng, X. (1994) Prediction of the manoeuvring forces on a slender ship using slender body theory. Part III: the commissioning and operation of a horizontal planar motion mechanism. Southampton, GB, University of Southampton, 19pp. (Ship Science Reports, (75) ).

Westlake, P.C. and Wilson, P.A. (2000) A new conformal mapping technique for ship sections. International Shipbuilding Progress, 47, (449/2000), 5-22.

Westlake, P.C. and Wilson, P.A. (1998) Ship motions in oblique regular waves. Southampton, UK, University of Southampton, 89pp. (Ship Science Reports, (104) ).

Westlake, P.C., Wilson, P.A. and Bailey, P.A. (2000) Time domain simulations of ship motions. RINA Transaction Part D, 142, 268-288. (doi:10.3940/rina.sbt.2000.d4).

Weymouth, G.D. and Maertens, Audrey (2013) Accurate near-body Cartesian-grid predictions at intermediate Reynolds numbers. In, EUROMECH Colloquium 549 Immersed Boundary Methods: Current Status and Future Research Directions, Leiden, NL, 17 - 19 Jun 2013. , 1-31.

Weymouth, Gabriel D. (2013) Comparison and synthesis of 2D+T and 3D predictions of non-linear ship bow waves. In, International Conference on Ocean, Offshore and Arctic Engineering, Nantes, FR, 09 - 14 Jun 2013. , 1-9.

Wharton, J.A., Barik, R.C., Kear, G., Wood, R.J.K., Stokes, K.R. and Walsh, F.C. (2005) The corrosion of nickel–aluminium bronze in seawater [in A Century of Tafel’s Equation: A Commemorative Issue of Corrosion Science]. Corrosion Science, 47, (12), 3336-3367. (doi:10.1016/j.corsci.2005.05.053).

Whitten, T., Merry, S.L. and Allen, R. (1998) A novel propulsion system for small underwater vehicles. In, Oceanology International 98: the global ocean. Conference Proceedings Vol. 3. Oceanology International 98 : The Global Ocean New Malden, UK, Spearhead Exhibitions Ltd, 165-174.

Williamson, C.H.K. (1978) Methods to determine the hydrodynamic CLR and directional stability of yachtforms. Southampton, UK, University of Southampton, 81pp. (Ship Science Reports, (3/78) ).

Wilson, P. A. (2009) Autonomous homing and docking tasks for an underwater vehicle. In, McMc'09, Sao Paolo, Brazil, 16 - 19 Sep 2009. Sao Paolo, Brazil, Institute Electical and Electronics Engineers6pp.

Wilson, P. A. (2010) Underwater vehicle technology: the European project (FREESUB). The 3rd International Conference on Underwater System Technology: Theory and Applications 2010 (USYS'10) , Malaysia, MY, 01 - 02 Nov 2010. 16pp.

Wilson, P. A., Harris, C.J. and Hong, X. (2003) A line of sight counteraction navigation algorithm for ship encounter collision avoidance. Journal of Navigation, 56, (1), 111-121. (doi:10.1017/S0373463302002163).

Wilson, P.A. (1984) The apparent shape of towing tanks. Southampton, UK, University of Southampton, 16pp. (Ship Science Reports, (18) ).

Wilson, P.A. (1986) The apparent shape of towing tanks. Journal of Naval Science, 12, (1), 19-22.

Wilson, P.A. (1981) Calculation of static and dynamic configurations of a single point mooring cable. Southampton, UK, University of Southampton, 24pp. (Ship Science Reports, (7/81) ).

Wilson, P.A. (2005) Design & analysis facilities for warship design. In, Algorithms and Computation: Proceedings of the 16th International Symposium, ISAAC 2005. 16th International Symposium on Algorithms and Computation (ISAAC 2005) , Springer, 301-314. (Lecture Notes in Computer Science 3827).

Wilson, P.A. (2005) Design and analysis facilities for warship design. In, Johansson, K. and Han, S. (eds.) Proceedings of the 12th International Conference on Computer Applications in Shipbuilding. 12th International Conference on Computer Applications in Shipbuilding - ICCAS Busan, Korea, ICCAS, 301-314.

Wilson, P.A. (1986) Determination of quiescent periods in short crested seas. Southampton, UK, University of Southampton, 9pp. (Ship Science Reports, (26) ).

Wilson, P.A. (2005) Discovery programme, Bigger, Stronger, Better series: greener ships: the effect of wave wash. BBC World Service, 15 Nov 2005

Wilson, P.A. (1981) The effect of truncation of spectra in computing subjective motion. Southampton, UK, University of Southampton, 11pp. (Ship Science Reports, (4/81) ).

Wilson, P.A. (1982) The effect of truncation of spectra when computing subjective motion. The Naval Architect, 130, E83-E85.

Wilson, P.A. (2012) FREESUBNET a collaborative research program. In, 4th International Conference on Underwater System Technology: Theory and Applications 2012 (USYS'12), Kuala Lumpur, MY, 04 - 06 Dec 2012, 05 - 06 Dec 2012. 8pp.

Wilson, P.A. (1992) Graphics visualizations of seakeeping data. Southampton, UK, University of Southampton, 23pp. (Ship Science Reports, (58) ).

Wilson, P.A. (1993) Lateral force estimator and its uses in controlling and stabilising ships. In, Ship Manoeuvring Workshop - Manoeuvring Qualities In Ship Design - Practical Exercises Programme., Ilawa, Poland, 04 - 07 Oct 1993. Ilawa, Poland, 12pp.

Wilson, P.A. (1994) LFE stabilisation of Ships. In, IMECE'94, Shanghai, China, 08 - 10 Nov 1994. Shanghai, China, 5pp, 8-12.

Wilson, P.A. (1981) Lifting and fairing ship lines data on a Tektronix 4052. Southampton, UK, University of Southampton, 13pp. (Ship Science Reports, (9/81) ).

Wilson, P.A. (1983) Manual for the calculation of vertical motions of a ship using an Apple microcomputer. Southampton, UK, University of Southampton, 29pp. (Ship Science Reports, (1/83) ).

Wilson, P.A. (1986) More on the shape of towing tanks. Journal of Naval Science, 12, (3), 40-42.

Wilson, P.A. (1983) Online seakeeping calculations. Southampton, UK, University of Southampton, 71pp. (Ship Science Reports, (11) ).

Wilson, P.A., Society for Underwater Technology (SUT) (1988) The prediction of manoeuvring characteristics of surface ships in the design spiral. In, Jackman, T.J. (ed.) Technology Common to Aero and Marine Engineering. Dordrecht, The Netherlands, Kluwer, 233-244. (Advances in Underwater Technology, Ocean Science and Offshore Engineering, 15).

Wilson, P.A. (1985) A review of methods of calculation of added resistance for ships in a seaway. Journal of Wind Engineering and Industrial Aerodynamics, 20, (1-3), 187-199. (doi:10.1016/0167-6105(85)90018-2).

Wilson, P.A. (1986) Seakeeping analysis from methodical series. In, Keramides, G.A. and Murthy, T.K. (eds.) International Conference on Computer Aided Design, Manufacture and Operation in the Marine and Offshore Industries (CADMO '86). New York, USA, Springer, 237-254.

Wilson, P.A. (1987) Seakeeping calculations by microcomputer. Southampton, UK, University of Southampton, 52pp. (Ship Science Reports, (28) ).

Wilson, P.A. (1981) Theory and computer programme for calculation of the lateral motion of a ship. Southampton, UK, University of Southampton, 32pp. (Ship Science Reports, (6/81) ).

Wilson, P.A. (1987) Time series programme. Southampton, UK, University of Southampton, 8pp. (Ship Science Reports, (30) ).

Wilson, P.A. (1987) Total motions at a point programme. Southampton, UK, University of Southampton, 6pp. (Ship Science Reports, (29) ).

Wilson, P.A. (2012) Training seminar in intelligent transport systems. Training Seminar in Intelligent Transport Systems, Samara, RU, 15 Sep 2012.

Wilson, P.A. (1987) The use of conformal mapping in seakeeping calculations. Southampton, UK, University of Southampton, 17pp. (Ship Science Reports, (32) ).

Wilson, P.A. (1991) The use of high definition graphics in seakeeping and ship manoeuvring. In, 3rd International Conference on Computer Methods in Marine and Offshore Engineering (CADMO 91). 3rd International Conference in Computer Methods in Marine and Offshore Engineering (CADMO 91) Southampton, UK, Computational Mechanics Publications, 183-195.

Wilson, P.A. (1992) The use of lateral force estimator in ship control. In, Murthy, T.K.S. (ed.) 4th International Conference on Computer Aided Design Manufacture and Operation in the Marine and Offshore Industries (CADMO 92). Southampton, UK, Computational Mechanics Publications, 323-332.

Wilson, P.A. (1987) The use of symmetry in seakeeping calculations. Southampton, UK, University of Southampton, 12pp. (Ship Science Reports, (33) ).

Wilson, P.A. and Austin, S.C. (2010) Maritime voyage data recorder study by the European Maritime Data Management Project. International Journal of Maritime Engineering, 151, (A4), 13-25. (doi:10.3940/rina.ijme.2009.a4.160).

Wilson, P.A. and Blake, J.I.R. (1998) Analysis and prediction of motions of high speed planing craft in waves. In, High Speed Motions and Manoeuvrability. Proceedings. High Speed Motions and Manoeuvrability, 1998. Royal Institution of Naval Architects, London. London, UK, RINA (Royal Institution of Naval Architects), 1-13. (doi:10.3940/rina.hscm.1998.1).

Wilson, P.A., Harris, C.J. and Tran, T. (1999) Maritime avoidance navigation totally integrated system (MANTIS). In, Stapersma, D. (ed.) Proceedings of the Twelfth Ship Control Systems Symposium (12th SCSS 1999). 12th SCSS 1999 - 12th Ship Control Systems Symposium The Hague, The Netherlands, Royal Dutch Navy.

Wilson, P.A. and Hudson, D.A. (1999) Seakeeping design of a high-speed autonomous semi-submersible vehicle. In, Fifth International Conference on Fast Sea Transportation (FAST 1999), Seattle, USA, 31 Aug - 02 Sep 1999. Seattle, USA, Society of Naval Architects & Marine Engineers11pp, 107-118.

Wilson, P.A. and Hudson, D.A. (1999) Seakeeping design of an autonomous semi-submersible vehicle. Transactions of the Royal Institution of Naval Architects, 141, 211-222. (doi:103940/rina.sbt.1999.c4).

Wilson, P.A. and Lewis, G.D.W (1988) Predicting surface ship manoeuvring characteristics for preliminary design using a microcomputer. Journal of Naval Science, 14, (1), 51-58.

Wilson, P.A. and Lewis, G.D.W. (1986) Predicting surface ship manoeuvring characteristics for preliminary design using a desktop computer. In, Keramides, G.A. and Murthy, T.K.S. (eds.) Computer Aided Design, Manufacture and Operation in the Marine and Offshore Industries (CADMO 86). Southampton, UK, Computational Mechanics Publications, 19-32.

Wilson, P.A., Manganelli, P. and Wagemakers, B. (2002) Investigation of slamming loads using slam patches on a scale model of an Open 60' class yacht. In, Proceedings HISWA 2002. HISWA 2002 Driebergen, The Netherlands, Handel Industrie En Scheepvaart in de Waterrecreatie.

Wilson, P.A., Molland, A.F. and Cartwright, R.J. (2005) A study of the potential replacements for a vessel for the port of London authority. In, Proceedings of FAST2005. FAST2005 [Eighth International Conference on Fast Sea Transportation] , The Institute of Marine Engineering, Science and Technology.

Wilson, P.A. and Prince, M.P. (1996) Helicopter handling and entrapment. Southampton, UK, University of Southampton, 48pp. (Ship Science Reports, (96) ).

Wilson, P.A. and Prince, M.P. (1997) Helicopter handling and entrapment systems. warship, 1997, 1-10. (doi:10.3940/rina.warship.1997.1).

Wilson, P.A. and Prince, M.P. (1998) Predictions of quiescent periods in ship motions using wavelet analysis. Ship Motions and Manoeuvrability, 1-10. (doi:10.3940/rina.sm.1998.11).

Wilson, P.A. and Prince, M.P. (1999) The testing of an H-infinity roll stabilisation controller through experimental and numerical analysis. In, Stapersma, D. (ed.) Proceedings of the Twelfth Ship Control Systems Symposium (12th SCSS 1999). 12th SCSS 1999 - 12th Ship Control Systems Symposium The Hague, The Netherlands, Royal Dutch Navy, 1-10.

Wilson, P.A. and Smithwick, J.E.T. (1995) Constructing a hydrodynamics and aerodynamic research tunnel. Naval Architect, 140, 434-436.

Wilson, P.A., Squires, M.A. and Seakins, P.A. (1990) Enhanced preliminary design manoeuvring simulator techniques. In, International Conference on Modelling and Control of Marine Craft, Exeter, UK, 18 - 20 Apr 1990. Elsevier12pp, 40-51.

Wilson, P.A., Squires, M.A. and Seakins, P.A. (1990) Enhanced preliminary design ship manoeuvring simulator techniques. In, Symposium on Modelling and Control of Marine Craft, Exter, UK, Exeter, UK, , 40-51.

Wilson, P.A. and Tang, A. (1992) An investigation into lateral force estimator (LFE) stabilisation using the rudder. Southampton, UK, University of Southampton, 47pp. (Ship Science Reports, (51) ).

Wilson, P.A. and Tang, A. (1992) LFE stabilisation report of preliminary trial. Southampton, UK, University of Southampton, 53pp. (Ship Science Reports, (57) ).

Wilson, P.A. and Tang, A. (1992) Ship stabilization using a lateral force estimator. The Naval Architect, 138, E165-E166.

Wilson, P.A. and Tang, A.S.T. (1992) Lateral force estimator stabilisation. In, 2nd IFAC Workshop on Control Applications in Marine Systems (CAMS 92), Genova, Italy, 04 - 05 Nov 1992. , 1-10.

Wilson, P.A. and Ward, B. (1992) Experiments to investigate vortex separation on an appended body of revolution. In, Murthy, T.K.S (ed.) 4th International Conference on Computer Aided Design Manufacture and Operation in the Marine and Offshore Industries (CADMO 92). Southampton, UK, Computational Mechanics Publications, 519-532.

Wilson, P.A., Zhao, J., Price, W.G. and Tan, M. (1996) A basic study of the first manoeuvre decision making for automatic collision avoidance systems using neural networks and fuzzy sets. In, Zhao, J, Wilson, P.A., Hu, Z. and Wang, F. (eds.) Maritime collision and prevention : proceedings of the Hill Taylor Dickinson Seminar on Maritime Collision, held in Dalian, China, 21 September 1996, and the International Conference on Preventing Collision at Sea, held in Dalian, China 22-25 September 19. Hill Taylor Dickinson Seminar on Maritime Collision and International Conference on Preventing Collision at Sea - Collision'96 Dalian, China, Chiavari Publishing, 63-68.

Wilson, P.A., Zhao, J., Price, W.G. and Tan, M. (1996) Comments on recent cases of collision liability. In, Zhao, J., Wilson, P.A, Hu, F. and Wang, Z. (eds.) Maritime Collision and Prevention : proceedings of the Hill Taylor Dickinson Seminar on Maritime Collision, held in Dalian, China, 21 September 1996, and the International Conference on Preventing Collision at Sea, held in Dalian, China 22-25 September 19. Hill Taylor Dickinson Seminar on Maritime Collision and International Conference on Preventing Collision at Sea Dalian, China, Chiavari Publishing, 150-171.

Winden, B., Badoe, C., Turnock, S.R., Phillips, Alexander B. and Hudson, D.A. (2013) Self propulsion in waves using a coupled RANS-BEMt model and active RPM control. In, Numerical Towing Tank Symposium (NuTTS'13), Duisburg, DE, 02 - 04 Sep 2013.

Winden, B., Turnock, S.R. and Hudson, D.A. (2013) Predicting powering performance changes for ships in offshore conditions from small design modifications. In, Twenty-third International Offshore and Polar Engineering Conference, Anchorage, US, 30 Jun - 04 Jul 2013.

Winden, B., Turnock, Stephen R. and Hudson, Dominic A. (2012) Validating force calculations using OpenFOAM on a fixed wigley hull in waves. In, NuTTS 2012: 15th Numerical Towing Tank Symposium, Cortona, IT,

Winden , Bjorn, Turnock, S.R. and Hudson, Dominic A. (2013) A RANS Modelling Approach for Predicting Powering Performance of Ships in Waves. In, Proceedings of PRADS2013 Conference. The 12th International Symposium on Practical Design of Ships and Other Floating Structures , Society of Naval Architects of Korea, 31-38.

Windén, Björn (2014) Visualisation of the flow and force distribution around a self propelled container ship in head waves. doi:10.5258/SOTON/365546 [dataset]

Wood, C.D., Hudson, Dominic A. and Tan, Mingyi (2010) CFD simulation of orifice flow for the flooding of damaged ships. In, NuTTS 2010: 13th Numerical Towing Tank Symposium, Duisburg, DE, 10 - 12 Oct 2010. 4pp.

Wright, A.M. and Turnock, S.R. (1999) Convective cell approach for solving incompressible Euler flows: explicit flux vector splitting scheme using artificial compressibility. Southampton, UK, University of Southampton, 82pp. (Ship Science Reports, (117) ).

Wright, A.M. and Turnock, S.R. (1999) Efficient multi-level adaption methods for unstructured polyhedral computational meshes. Southampton, UK, University of Southampton, 74pp. (Ship Science Reports, (109) ).

Wright, A.M. and Turnock, S.R. (1999) Techniques for assessing the flow and spatial quality of arbitrary 3D computational meshes. Southampton, UK, University of Southampton, 99pp. (Ship Science Reports, (108) ).

Wright, P.N.H, Hutchinson, K.W. and Downes, Jonathan (2013) Naval Architecture and Ship Design Education in Singapore and Newcastle: Under-graduate Learning and Teaching through to Initial Professional Development. In, International Conference on Education and Professional Development of Engineers in the Maritime Industry, Singapore, Republic of, SG, 26 - 27 Feb 2013. The Royal Institution of Naval Architects.

Wu, Wei, Chen, Sheng and Qin, Shiqiao (2012) Determination of dynamic flexure model parameters for ship angular deformation measurement. In, UKACC International Conference on Control 2012, Cardiff, GB, 03 - 05 Sep 2012. 6pp.

Wu, X., Feng, Z., Zhu, J. and Allen, R. (2006) Line of sight guidance with intelligent obstacle overidance for autonomous underwater vehicles. In, Oceans'06 MTS/IEEE-Boston Conference and Exhibition, Boston, USA, 18 - 21 Sep 2006. , 6pp.

X

Xing, J., Shenoi, R.A., Wilson, P.A. and Xing, J.T. (2000) Gravitational effect on permeability identification. Proceedings of the 8th International Conference On Fibre Reinforced Composites (FRC 2000, 175 -182. (731).

Xing, J.T. (2005) Advanced vibration modeling and analysis with applications in maritime engineering. In, 4th MASTRUCT General Meeting, Lisbon, Portugal, 26 - 30 Sep 2005. , 1-258.

Xing, J.T. (2006) The natural vibration of fluid-structure interaction systems subject to the sommerfeld radiation condition. ASME PVP 2006 / ICPVT-11: 2006 Pressure Vessels & Piping Conference and the Eleventh International Conference on Pressure Vessel Technology, Vancouver, Canada, 23 - 27 Jul 2006. USA, American Society of Mechanical Engineers, 1-8.

Xing, J.T. (2005) Numerical methods solving dynamic finite element equations. Maritime Transportation and Exploitation of Ocean and Coastal Resources, IMAM 2005, Lisbom, Portugal, September 26-30, 2005, 1, 559-567.

Xing, J.T. and Price, W. G. (1999) Variational formulations of nonlinear water-ship interaction problems. Mechanics and Engineering, in Honor of Professor Qinghua Du's 80th Anniversary, eds. Zhenhan Yao, Xucheng Wang and Zhangzhi Cen, 262-269.

Xing, J.T. and Price, W.G. (1995) General theorems and generalized variational principles for nonlinear elastodynamics. Southampton, UK, University of Southampton, 25pp. (Ship Science Reports, (99) ).

Xing, J.T., Xiong, Y.P. and Tan, M. (2009) Developments of a mixed finite element substructure–subdomain method for fluid–structure interaction dynamiProccs with applications in maritime engineering. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 223, (3), 399-418. (doi:10.1243/14750902JEME149).

Xing, J.T., Xiong, Y.P. and Tan, M. (2007) The natural vibration characteristics of a water-shell tank interaction system. In, 1st MARSTRUCT International Conference, Glasgow, Scotland, 12 - 14 Mar 2007. London, UK, Taylor & Francis8pp, 305-312.

Xing, J.T., Xiong, Y.P., Tan, M. and Toyota, Makoto (2006) Vibration problem of a spherical tank containing jet propellant: numerical simulations. Southampton, UK, University of Southampton, 59pp. (Ship Science Reports, (141) ).

Xing, J.T., Xiong, Y.P. and Tan, M.Y. (2009) Application developments of mixed finite element method for fluid-structure interaction analysis in maritime engineering. In, Proceedings of Marstruct 2009: Analysis and Design of Marine Structures. 2nd International Conference on Marine Structures. Marstruct 2009: Analysis and Design of Marine Structures. 2nd International Conference on Marine Structures London, UK, Taylor & Francis, 83-92.

Xing, JingTang, Xiong, Ye Ping, Tan, Ming Yi and An, Huaiyu (2009) A numerical investigation of a wave energy harness device-water interaction system subject to the wave maker excitation in a towing tank. In, Proceedings of the 28th International Conference on Ocean, Offshore and Arctic Engineering. 28th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2009) New York, USA, American Society of Mechanical Engineers, 1-10.

Xiong, J.-J., Shenoi, R.A. and Zhang, Y. (2008) Effect of the mean strength on the endurance limit or the crack growth threshold and the associated probability distributions. Journal of Strain Analysis for Engineering Design, 43, (4), 243-258. (doi:10.1243/03093247JSA336).

Xiong, J.J. and Shenoi, R.A. (2009) A durability model incorporating safe life methodology and damage tolerance approach to assess first inspection and maintenance period for structures. Reliability Engineering & System Safety, 94, (8), 1251-1258. (doi:10.1016/j.ress.2009.01.005).

Xiong, J.J. and Shenoi, R.A. (2008) Integrated experimental schemes for bonded patch repairs to notched aluminium-alloy panels based on static and fatigue strength concepts. Composite Structures, 83, (3), 266-272. (doi:10.1016/j.compstruct.2007.04.019).

Xiong, J.J. and Shenoi, R.A. (2006) Single-point likelihood method to determine a generalized S-N surface. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220, (10), 1519-1530. (doi:10.1243/09544062JMES127).

Xiong, J.J., Shenoi, R.A. and Cheng, X. (2009) A modified micromechanical curved beam analytical model to predict the tension modulus of 2D plain weave fabric composites. Composites B, 40, (8), 776-783. (doi:10.1016/j.compositesb.2009.06.004).

Xiong, Y., Xing, J.T. and Price, W. (2005) Power flow analysis and applications to vibration and control in maritime engineering. Maritime Transportation and Exploitation of Ocean and Coastal Resources, eds C. Guedes Soares et al, IMAM 2005, Lisbom, Portugal, September 26-30, 2005, 1, 569-577.

Xiong, Y.P., Wang, X.P., Xing, J.T. and Price, W.G. (2000) Hybrid active and passive control of vibratory power flow in flexible isolation system. Shock and Vibration, 7, (3), 139-148.

Xiong, Y.P. and Xing, J.T. (2008) Dynamic analysis and design of LNG tanks considering fluid structure interactions. In, 27th International Conference on Offshore Mechanics and Arctic Engineering-OMAE2008, Paper OMAE2008-57937. 27th International Conference on Offshore Mechanics and Arctic Engineering (OMAE2008) USA, ASME, 1-7.

Xiong, Y.P. and Xing, J.T. (2007) Natural dynamic behaviour of an integrated liquid – LNG tank – water interaction system. In, MARSTRUCT 2007: 1st International Conference on Marine Structures: Advancements in Marine Structures, Glasgow, UK, 12 - 14 Mar 2007. London, UK, Taylor & Francis9pp, 313-321.

Xiong, Y.P. and Xing, J.T. (2005) Power flow analysis and applications to ship vibration and controls. In, MASTRUCT 3rd General Meeting, Glasgow, UK, 21 - 23 Feb 2005. , 1-15.

Xiong, Y.P. and Xing, J.T. (2008) Power flow mode theory and application to active vibration control of equipment mounted on travelling flexible ship excited by waves. In, Proceedings of ISMA 2008 International Conference on Noise and Vibration Engineering. 23rd ISMA Conference Leuven, Belgium, Katholieke Universiteit Leuven, 439-454. (ID607).

Xiong, Y.P. and Xing, J.T. (2008) Transient dynamic responses of an integrated air-liquid-elastic tank interaction system subject to earthquake excitations. In, ASME Pressure Vessels and Piping Division Conference (PVP2008), PVP2008-61815. 2008 ASME Pressure Vessels and Piping Division Conference-PVP2008 USA, ASME, 1-10.

Xiong, Y.P., Xing, J.T. and Price, W.G. (2006) The interactive dynamic behaviour of an air-liquid-elastic spherical tank system. ASME PVP 2006 / ICPVT-11, (PVP2006-ICPVT11), 1-8.

Xiong, Y.P., Xing, J.T. and Tan, M. (2007) Transient dynamic responses of an internal liquid-LNG tank-sea water interaction system excited by waves and earthquake loads. In, Fourteenth International Congress on Sound & Vibration (ICSV14), Cairns, Australia, 09 - 12 Jul 2007. Cairns, Australia, International Institute of Acoustics and Vibration8pp, 1-8.

Xue, X.G., Li, G.X., Sobey, A.J. and Shenoi, R.A. (2013) The application of reliability based optimization of tophat stiffened composite panels subject to bi-directional buckling loads. Materials Science and Engineering B, 3, (11), 721-733.

Z

Zhao, J., Price, W.G., Grime, R.P. and Wilson, P.A. (1996) Legal interpretation of keeping course and speed. In, Zhao, J., Wilson, P.A., Hu, Z. and Wang, F. (eds.) Maritime collision and prevention : proceedings of the Hill Taylor Dickinson Seminar on Maritime Collision, held in Dalian, China, 21 September 1996, and the International Conference on Preventing Collision at Sea, held in Dalian, China 22-25 September 19. Hill Taylor Dickinson Seminar on Maritime Collision and International Conference on Preventing Collision at Sea - Collision'96 Dalian, China, Chiavari Publishing, 235-259.

Zhao, J., Price, W.G. and Wilson, P.A. (1995) Automatic collision avoidance: towards the 21st century. In, ACAS, Shanghai, China, Sep 1994. Shanghai, China, , 1-10.

Zhao, J., Price, W.G. and Wilson, P.A. (1994) Risk assessment of ship/platform collision. In, Murthy, T.K.S., Wadhams, P. and Wilson, P.A. (eds.) Marine, Offshore and Ice Technology: Proceedings of the International Conference on Computer-aided Manufacture and Operation in the Marine and Offshore Industries and Ice Technology. CADMO'94 - International Conference on Computer-aided Manufacture and Operation in the Marine and Offshore Industries and Ice Technology Southampton, UK, Computational Mechanics Publications, 51-58. (doi:10.2495/CMO940191).

Zhao, J., Tan, M., Price, W.G. and Wilson, P.A. (1994) Simulation model for automatic collision avoidance decision making systems using fuzzy sets. In, OCEANS '94: Proceedings of Oceans Engineering for Today's Technology and Tomorrow's Preservation. Oceans 94: Oceans Engineering for Today's Technology and Tomorrow's Preservation Brest, France, Institute of Electrical and Electronics Engineers, 244-249. (94Ch34722-8 (Oceans), 2). (doi:10.1109/OCEANS.1994.364049).

Zhao, J., Tan, M., Price, W.G. and Wilson, P.A. (1996) A statistical study of mariners behaviour in collision avoidance at sea. In, Chislett, M J (ed.) Marine Simulation and Ship Manoeuvrability. International Conference MARSIM'96 Copenhagen, Denmark, Taylor & Francis, 169-176.

Zhao, J., Tan, M., Price, W.G. and Wilson, P.A. (1994) The uncertainity and uncoordination of mariners behaviour to collision avoidance at sea. In, 8th Navigation Simulator Conference, Shangahai, China, Sep 1994. Shanghai, China, , 1-12.

Zhao, J., Wilson, P.A. and Price, W.G. (1994) A study of the ship domain with collision making simulation models. In, 3rd Conference on Marine Craft Manoeuvering and Control (MCMC'94), Southampton, UK, 07 - 09 Sep 1994. Southampton, UK, Computational Mechanics Publications10pp, 251-260.

Zhao, J., Wilson, P.A., Price, W.G. and Tan, M. (1995) The uncertainty and uncoordination of mariners' behaviour in collision avoidance at sea. Journal of Navigation, 48, (3), 425-435. (doi: 10.1017/S0373463300012911).

Zhao, S., Xing, J.T. and Price, W.G. (2002) Natural vibration of a flexible beam-water coupled system with a concentrated mass attached at the free end of the beam. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 216, (2), 145-154.

Zhao, S., Xing, J.T., Price, W.G. and Chen, Y.G. (2003) The numerical analysis of a two dimensional nonlinear beam water interaction system. Hydroelasticity 2003: 3rd International Conference on Hydroelasticity in Marine Technology, Oxford, UK, 15 - 17 Sep 2003. Oxford, UK, Oxford University, 75-84.

Zhou, Q., Zhang, W. and Joseph, P.F. (2001) A new method of determining acoustic added mass and damping coefficient of fluid-structure interaction. In, Practical Design of Ships and Other Floating Structures: Proceedings of the Eighth International Symposium on Practical Design of Ships and Other Floating Structures, 16-21 September 2001, Shanghai, China, Vol. 2. Eighth International Symposium on Practical Design of Ships and Other Floating Structures Amsterdam, Elsevier Science, 1185-1195.

Zhou, Xincong, Qin, Li, Xiong, Yeping, Quan, Jianzhou and Wang, Xinping (2014) Vibrational characteristics of a marine shaft coupling system excited by propellor force. In, 21st International Congress on Sound and Vibration (ICSV21), Beijing, CN, 13 - 17 Jul 2014. 11pp.

Zhuo, Y. and Hearn, G.E. (2008) A ship based intelligent anti-collision decision-making support system utilizing trial manoeuvres. In, Chinese Control and Decision Conference, Yantai, China, 02 - 04 Jul 2008. Yantai, China, 5pp.

Zhuo, Y. and Hearn, G.E. (2008) Ship intelligent autopilot in narrow water. In, 27th Annual Chinese Control Conference (CCC'08), Kunming, China, 16 - 18 Jul 2008. Kunming, China, 6pp.

This list was generated on Tue Jul 29 19:36:54 2014 BST.