Acoustic characterisation of panel materials under simulated ocean conditions
Acoustic characterisation of panel materials under simulated ocean conditions
Viscoelastic materials are used for a variety of purposes in underwater acoustics, including encapsulation, housing and coating/lining. The acoustic properties of these materials can vary significantly with frequency, temperature and hydrostatic pressure. As a consequence, techniques of accurately characterising their acoustic properties are important when designing and selecting materials and when assessing their performance. Methods exist to determine the echo reduction and transmission loss of panels of materials, but these are typically undertaken in open laboratory tanks at atmospheric pressure. This limits the range of testing possible, since such tanks cannot
provide the range of environmental conditions that exist during deployment in the sea. Sea-trials are themselves expensive and are limited by the prevailing temperature conditions in the sea where the measurements are carried out. An alternative approach has been investigated using the Acoustic Pressure Vessel (APV), recently commissioned at the UK's National Physical Laboratory (NPL), which is capable of simulating ocean depths down to 700 m and temperatures from 2 °C to 35 °C. In order to provide a wide frequency range and limit the effects of diffraction a parametric array was installed in the APV as an acoustic source, with the array being truncated by an acoustic filter in order to provide a source-free measurement region. This facility has been used to measure the transmission loss and echo reduction of materials over a frequency range from a few kHz to 50 kHz, for pressures up to 2.8 MPa and for a range of temperatures from 8.0 °C to 27 °C. The problems of establishing a parametric array in the closed, confined space of the APV are discussed, as are the effects of pressure on the acoustic filter. The potential of the technique is illustrated with experimental results for the measurement of echo reduction and transmission loss of a test panel.
Humphrey, V.F.
23c9bd0c-7870-428f-b0dd-5ff158d22590
Carroll, N.L.
ebb6e85f-f853-4afa-b691-96661a9e3321
Smith, J.D.
36614739-504f-48d7-9455-afef5cc4663d
Beamiss, G.A.
bcbbe28c-67d7-491b-8580-087eb41bf590
Hayman, G.
c767c64a-8eb5-4415-8af3-55d125730818
Esward, T.J.
06fd58e3-778d-4732-8b2e-e7b9ec4e3068
Robinson, S.P.
00d341a1-6153-45db-bda4-666928a652e5
2003
Humphrey, V.F.
23c9bd0c-7870-428f-b0dd-5ff158d22590
Carroll, N.L.
ebb6e85f-f853-4afa-b691-96661a9e3321
Smith, J.D.
36614739-504f-48d7-9455-afef5cc4663d
Beamiss, G.A.
bcbbe28c-67d7-491b-8580-087eb41bf590
Hayman, G.
c767c64a-8eb5-4415-8af3-55d125730818
Esward, T.J.
06fd58e3-778d-4732-8b2e-e7b9ec4e3068
Robinson, S.P.
00d341a1-6153-45db-bda4-666928a652e5
Humphrey, V.F., Carroll, N.L., Smith, J.D., Beamiss, G.A., Hayman, G., Esward, T.J. and Robinson, S.P.
(2003)
Acoustic characterisation of panel materials under simulated ocean conditions.
Proceedings of the Institute of Acoustics, 25 (1).
Abstract
Viscoelastic materials are used for a variety of purposes in underwater acoustics, including encapsulation, housing and coating/lining. The acoustic properties of these materials can vary significantly with frequency, temperature and hydrostatic pressure. As a consequence, techniques of accurately characterising their acoustic properties are important when designing and selecting materials and when assessing their performance. Methods exist to determine the echo reduction and transmission loss of panels of materials, but these are typically undertaken in open laboratory tanks at atmospheric pressure. This limits the range of testing possible, since such tanks cannot
provide the range of environmental conditions that exist during deployment in the sea. Sea-trials are themselves expensive and are limited by the prevailing temperature conditions in the sea where the measurements are carried out. An alternative approach has been investigated using the Acoustic Pressure Vessel (APV), recently commissioned at the UK's National Physical Laboratory (NPL), which is capable of simulating ocean depths down to 700 m and temperatures from 2 °C to 35 °C. In order to provide a wide frequency range and limit the effects of diffraction a parametric array was installed in the APV as an acoustic source, with the array being truncated by an acoustic filter in order to provide a source-free measurement region. This facility has been used to measure the transmission loss and echo reduction of materials over a frequency range from a few kHz to 50 kHz, for pressures up to 2.8 MPa and for a range of temperatures from 8.0 °C to 27 °C. The problems of establishing a parametric array in the closed, confined space of the APV are discussed, as are the effects of pressure on the acoustic filter. The potential of the technique is illustrated with experimental results for the measurement of echo reduction and transmission loss of a test panel.
This record has no associated files available for download.
More information
Published date: 2003
Identifiers
Local EPrints ID: 10336
URI: http://eprints.soton.ac.uk/id/eprint/10336
ISSN: 0309-8117
PURE UUID: ce032460-daa0-4a99-a50e-b9bc1d3630a1
Catalogue record
Date deposited: 12 May 2005
Last modified: 12 Dec 2021 03:24
Export record
Contributors
Author:
N.L. Carroll
Author:
J.D. Smith
Author:
G.A. Beamiss
Author:
G. Hayman
Author:
T.J. Esward
Author:
S.P. Robinson
Download statistics
Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.
View more statistics