An alternate oxic-anoxic process automatically controlled: theory and practice in a real treatment plant network
An alternate oxic-anoxic process automatically controlled: theory and practice in a real treatment plant network
A simple mathematical model of an alternate oxic-anoxic process has been elaborated. It enables us to optimise the cycle time on the basis of maximum nitrates concentration in the effluent and the desired nitrogen removal performance. At the same time the model can be employed to verify the impact of the variations of flow rate and influent characteristics as well as the operational parameters of the process. Actually, the model confirms the process efficiency but its feasibility in real plants needs a local or remote process control. To verify these theoretical conclusions a real wastewater plant (700 PE) has been upgraded in an alternate oxic-anoxic process. It was implemented with software able to elaborate the data of dissolved oxygen concentration and oxidation reduction potential. Moreover, the evaluation of the flexing points was performed to manage mixer and blowers. A one-year experience of plant management allowed us to obtain very high nitrogen removal. However, the performances were different during wet or dry weather periods. The statistical analysis of probe signals evaluation confirmed the capability of the control device to detect the flexing points during the anoxic phase (70-94%). On the other hand, the capability of detecting the DO signal was lower, in particular when the oxygen demand was similar to the amount of supplied oxygen. The hourly variations of flow rate and mass loading determines different conditions for starting the anoxic phase: over aeration, over loading and the equivalence of oxygen demand and supply, are the main factors determining the blowers stopping.
337-344
Bolzonella, D
554b33d4-ce6f-4d05-93ac-fcc5d49187f3
Battistoni, P
05bd4392-6721-4365-a826-df1171a4a74a
Boccadoro, R
8c085f68-359e-42d7-b86f-6576411ad16c
Marinelli, M
02ab3c64-79cc-4dd1-900f-c1e1cff8cc58
2003
Bolzonella, D
554b33d4-ce6f-4d05-93ac-fcc5d49187f3
Battistoni, P
05bd4392-6721-4365-a826-df1171a4a74a
Boccadoro, R
8c085f68-359e-42d7-b86f-6576411ad16c
Marinelli, M
02ab3c64-79cc-4dd1-900f-c1e1cff8cc58
Bolzonella, D, Battistoni, P, Boccadoro, R and Marinelli, M
(2003)
An alternate oxic-anoxic process automatically controlled: theory and practice in a real treatment plant network.
Water Science & Technology, 48 (11-12), .
Abstract
A simple mathematical model of an alternate oxic-anoxic process has been elaborated. It enables us to optimise the cycle time on the basis of maximum nitrates concentration in the effluent and the desired nitrogen removal performance. At the same time the model can be employed to verify the impact of the variations of flow rate and influent characteristics as well as the operational parameters of the process. Actually, the model confirms the process efficiency but its feasibility in real plants needs a local or remote process control. To verify these theoretical conclusions a real wastewater plant (700 PE) has been upgraded in an alternate oxic-anoxic process. It was implemented with software able to elaborate the data of dissolved oxygen concentration and oxidation reduction potential. Moreover, the evaluation of the flexing points was performed to manage mixer and blowers. A one-year experience of plant management allowed us to obtain very high nitrogen removal. However, the performances were different during wet or dry weather periods. The statistical analysis of probe signals evaluation confirmed the capability of the control device to detect the flexing points during the anoxic phase (70-94%). On the other hand, the capability of detecting the DO signal was lower, in particular when the oxygen demand was similar to the amount of supplied oxygen. The hourly variations of flow rate and mass loading determines different conditions for starting the anoxic phase: over aeration, over loading and the equivalence of oxygen demand and supply, are the main factors determining the blowers stopping.
This record has no associated files available for download.
More information
Published date: 2003
Identifiers
Local EPrints ID: 189043
URI: http://eprints.soton.ac.uk/id/eprint/189043
ISSN: 0273-1223
PURE UUID: 9f11ef07-dc0b-4c4f-bbd8-9256fcb6821c
Catalogue record
Date deposited: 31 May 2011 13:35
Last modified: 08 Jan 2022 11:39
Export record
Contributors
Author:
D Bolzonella
Author:
P Battistoni
Author:
R Boccadoro
Author:
M Marinelli
Download statistics
Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.
View more statistics