The University of Southampton
University of Southampton Institutional Repository

Charging ability of pure hydrocarbons and lubricating oils

Charging ability of pure hydrocarbons and lubricating oils
Charging ability of pure hydrocarbons and lubricating oils
An experiment using a purpose-built test rig to examine the effect of oil chemistry on the charging ability of various oils revealed that the charge produced depends on two extrinsic properties; the electric field (used to charge the droplet) and the droplet radius. A normalization parameter was developed from these dependencies and used to compare the results from the tests described herein.Four classes of liquids were tested. These were pure hydrocarbon liquids (hexadecane, decane, and squalane), base oils (both mineral and synthetic stocks), formulated oils (mineral base oil with additives), and commercial oils (fully formulated mineral and synthetic oils, available over-the-counter).The charging for both pure hydrocarbons and base oils indicates that the charged species have a low mobility and thus are likely to be large, bulky molecules. For this reason, the charging of the base oils is noticeably time dependent and the charge imparted on the oil did not always reach saturation. The charging (rate) of base oils appears to follow the level of impurities (particularly sulfur). Generally, both pure hydrocarbons and base oils tend to charge more when a positive field is applied.Conductivity values help to explain the measured charge levels. This would be expected as conductivity is related to the ionic species (charge carriers) present. The majority of the formulated and commercial oils tested reached charge saturation for all conditions tested, resulting in a normalized value of around 0.1 pC mm?1V?1, comparable with a theoretical calculated value. The formulated and commercial oils that did not reach saturation have conductivities comparable with base oils and therefore behave in a fashion similar to the base oils.
additives, electrostatic, mineral basestocks, lubricants
1040-2004
263-71
Harvey, T.
3b94322b-18da-4de8-b1af-56d202677e04
Wood, R.
d9523d31-41a8-459a-8831-70e29ffe8a73
Powrie, H.
cb7da853-44b6-44be-ba74-6db0ff2e15db
Warrens, C.
f199a93b-b0b1-49c7-97b7-3e45dd29a8ae
Harvey, T.
3b94322b-18da-4de8-b1af-56d202677e04
Wood, R.
d9523d31-41a8-459a-8831-70e29ffe8a73
Powrie, H.
cb7da853-44b6-44be-ba74-6db0ff2e15db
Warrens, C.
f199a93b-b0b1-49c7-97b7-3e45dd29a8ae

Harvey, T., Wood, R., Powrie, H. and Warrens, C. (2004) Charging ability of pure hydrocarbons and lubricating oils. Tribology Transactions, 47 (2), 263-71. (doi:10.1080/05698190490439184).

Record type: Article

Abstract

An experiment using a purpose-built test rig to examine the effect of oil chemistry on the charging ability of various oils revealed that the charge produced depends on two extrinsic properties; the electric field (used to charge the droplet) and the droplet radius. A normalization parameter was developed from these dependencies and used to compare the results from the tests described herein.Four classes of liquids were tested. These were pure hydrocarbon liquids (hexadecane, decane, and squalane), base oils (both mineral and synthetic stocks), formulated oils (mineral base oil with additives), and commercial oils (fully formulated mineral and synthetic oils, available over-the-counter).The charging for both pure hydrocarbons and base oils indicates that the charged species have a low mobility and thus are likely to be large, bulky molecules. For this reason, the charging of the base oils is noticeably time dependent and the charge imparted on the oil did not always reach saturation. The charging (rate) of base oils appears to follow the level of impurities (particularly sulfur). Generally, both pure hydrocarbons and base oils tend to charge more when a positive field is applied.Conductivity values help to explain the measured charge levels. This would be expected as conductivity is related to the ionic species (charge carriers) present. The majority of the formulated and commercial oils tested reached charge saturation for all conditions tested, resulting in a normalized value of around 0.1 pC mm?1V?1, comparable with a theoretical calculated value. The formulated and commercial oils that did not reach saturation have conductivities comparable with base oils and therefore behave in a fashion similar to the base oils.

This record has no associated files available for download.

More information

Published date: 2004
Keywords: additives, electrostatic, mineral basestocks, lubricants

Identifiers

Local EPrints ID: 22787
URI: http://eprints.soton.ac.uk/id/eprint/22787
ISSN: 1040-2004
PURE UUID: dc3cb8be-217b-407d-9dce-a1e59d79915a
ORCID for R. Wood: ORCID iD orcid.org/0000-0003-0681-9239

Catalogue record

Date deposited: 22 Mar 2006
Last modified: 16 Mar 2024 02:46

Export record

Altmetrics

Contributors

Author: T. Harvey
Author: R. Wood ORCID iD
Author: H. Powrie
Author: C. Warrens

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×