The University of Southampton
University of Southampton Institutional Repository

Reduction of l/f noise in polysilicon emitter bipolar transistors

Reduction of l/f noise in polysilicon emitter bipolar transistors
Reduction of l/f noise in polysilicon emitter bipolar transistors
Polysilicon emitter bipolar transistors are becoming common in modern bipolar and BICMOS processes. For analogue applications, it is important to understand the noise phenomena as well as the more familiar circuit behaviour. In this paper we report on experimental studies of the noise in these transistors. Firstly, we show how the noise depends strongly on the type of interfacial oxide layer at the polysilicon/silicon interface. For example, the 10 Hz noise of a device with an RCA interfacial oxide layer is approximately four times higher than that of a comparable device with an HF interfacial layer (i.e. thinner and with poorer integrity). The dependence is explained by means of a simple mathematical model of the noise generation, based on the fluctuation in the occupancy level of individual traps in the thin oxide at the polysilicon/silicon interface. Two methods are presented for reducing the noise in polysilicon emitter bipolar transistors. The first involves the use of an interface anneal, which has the effect of breaking up the interfacial layer. This method reduces the 10 Hz noise by a factor of approximately four, but also dramatically reduces the current gain. The second method involves a fluorine implantation into the polysilicon immediately after the emitter implant. This reduces the 10Hz noise by a factor of approximately three, but does not significantly alter the current gain. This is explained by the action of the fluorine in passivating surface states in the interfacial oxide layer. It is also shown how the physical emitter structure can influence the noise. Both the effective depth of the emitter-base junction and the periphery-to-area ratio have an influence on the noise through the varying significance of surface recombination currents.
0038-1101
389-400
Siabi-Shahrivar, N
c44c0070-13d6-4311-a647-ce75fb649416
Redman-White, W
d5376167-c925-460f-8e9c-13bffda8e0bf
Ashburn, P
68cef6b7-205b-47aa-9efb-f1f09f5c1038
Kemhadjian, H A
a60ec87d-ecf4-4417-928f-2f9b5918242b
Siabi-Shahrivar, N
c44c0070-13d6-4311-a647-ce75fb649416
Redman-White, W
d5376167-c925-460f-8e9c-13bffda8e0bf
Ashburn, P
68cef6b7-205b-47aa-9efb-f1f09f5c1038
Kemhadjian, H A
a60ec87d-ecf4-4417-928f-2f9b5918242b

Siabi-Shahrivar, N, Redman-White, W, Ashburn, P and Kemhadjian, H A (1995) Reduction of l/f noise in polysilicon emitter bipolar transistors. Solid-State Electronics, 38 (2), 389-400. (doi:10.1016/0038-1101(94)00126-Z).

Record type: Article

Abstract

Polysilicon emitter bipolar transistors are becoming common in modern bipolar and BICMOS processes. For analogue applications, it is important to understand the noise phenomena as well as the more familiar circuit behaviour. In this paper we report on experimental studies of the noise in these transistors. Firstly, we show how the noise depends strongly on the type of interfacial oxide layer at the polysilicon/silicon interface. For example, the 10 Hz noise of a device with an RCA interfacial oxide layer is approximately four times higher than that of a comparable device with an HF interfacial layer (i.e. thinner and with poorer integrity). The dependence is explained by means of a simple mathematical model of the noise generation, based on the fluctuation in the occupancy level of individual traps in the thin oxide at the polysilicon/silicon interface. Two methods are presented for reducing the noise in polysilicon emitter bipolar transistors. The first involves the use of an interface anneal, which has the effect of breaking up the interfacial layer. This method reduces the 10 Hz noise by a factor of approximately four, but also dramatically reduces the current gain. The second method involves a fluorine implantation into the polysilicon immediately after the emitter implant. This reduces the 10Hz noise by a factor of approximately three, but does not significantly alter the current gain. This is explained by the action of the fluorine in passivating surface states in the interfacial oxide layer. It is also shown how the physical emitter structure can influence the noise. Both the effective depth of the emitter-base junction and the periphery-to-area ratio have an influence on the noise through the varying significance of surface recombination currents.

This record has no associated files available for download.

More information

Published date: 1995
Organisations: Nanoelectronics and Nanotechnology

Identifiers

Local EPrints ID: 250943
URI: http://eprints.soton.ac.uk/id/eprint/250943
ISSN: 0038-1101
PURE UUID: 1c079df9-ecd7-4faf-871d-520506eb15e0

Catalogue record

Date deposited: 04 Oct 1999
Last modified: 16 Mar 2024 22:47

Export record

Altmetrics

Contributors

Author: N Siabi-Shahrivar
Author: W Redman-White
Author: P Ashburn
Author: H A Kemhadjian

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×