Turbine blade tip heat transfer in low speed and high speed flows
Turbine blade tip heat transfer in low speed and high speed flows
In this paper, high and low speed tip flows are investigated for a high-pressure turbine blade. Previous experimental data are used to validate a CFD code, which is then used to study the tip heat transfer in high and low speed cascades. The results show that at engine representative Mach numbers the tip flow is predominantly transonic. Thus, compared to the low speed tip flow, the heat transfer is affected by reductions in both the heat transfer coefficient and the recovery temperature. The high Mach numbers in the tip region (M>1.5) lead to large local variations in recovery temperature. Significant changes in the heat transfer coefficient are also observed. These are due to changes in the structure of the tip flow at high speed. At high speeds, the pressure side corner separation bubble reattachment occurs through supersonic acceleration which halves the length of the bubble when the tip gap exit Mach number is increased from 0.1 to 1.0. In addition, shock/boundary-layer interactions within the tip gap lead to large changes in the tip boundary-layer thickness. These effects give rise to significant differences in the heat-transfer coefficient within the tip region compared to the low-speed tip flow. Compared to the low speed tip flow, the high speed tip flow is much less dominated by turbulent dissipation and is thus less sensitive to the choice of turbulence model. These results clearly demonstrate that blade tip heat transfer is a strong function of Mach number, an important implication when considering the use of low speed experimental testing and associated CFD validation in engine blade tip design
978-0-7918-4884-5
349-359
The American Society of Mechanical Engineers
Wheeler, Andrew P.S.
0f243ba3-3aae-470c-ba4a-46a8c4b9197a
Atkins, Nicholas R.
acdd0d7f-0359-4c88-8d14-c3b387a5f757
He, Li
fed5e713-b34d-4f0a-ad5f-da317f5fed61
2009
Wheeler, Andrew P.S.
0f243ba3-3aae-470c-ba4a-46a8c4b9197a
Atkins, Nicholas R.
acdd0d7f-0359-4c88-8d14-c3b387a5f757
He, Li
fed5e713-b34d-4f0a-ad5f-da317f5fed61
Wheeler, Andrew P.S., Atkins, Nicholas R. and He, Li
(2009)
Turbine blade tip heat transfer in low speed and high speed flows.
In ASME Turbo Expo 2009: Power for Land, Sea, and Air (GT2009). Heat Transfer, Parts A and B.
The American Society of Mechanical Engineers.
.
(doi:10.1115/GT2009-59404).
Record type:
Conference or Workshop Item
(Paper)
Abstract
In this paper, high and low speed tip flows are investigated for a high-pressure turbine blade. Previous experimental data are used to validate a CFD code, which is then used to study the tip heat transfer in high and low speed cascades. The results show that at engine representative Mach numbers the tip flow is predominantly transonic. Thus, compared to the low speed tip flow, the heat transfer is affected by reductions in both the heat transfer coefficient and the recovery temperature. The high Mach numbers in the tip region (M>1.5) lead to large local variations in recovery temperature. Significant changes in the heat transfer coefficient are also observed. These are due to changes in the structure of the tip flow at high speed. At high speeds, the pressure side corner separation bubble reattachment occurs through supersonic acceleration which halves the length of the bubble when the tip gap exit Mach number is increased from 0.1 to 1.0. In addition, shock/boundary-layer interactions within the tip gap lead to large changes in the tip boundary-layer thickness. These effects give rise to significant differences in the heat-transfer coefficient within the tip region compared to the low-speed tip flow. Compared to the low speed tip flow, the high speed tip flow is much less dominated by turbulent dissipation and is thus less sensitive to the choice of turbulence model. These results clearly demonstrate that blade tip heat transfer is a strong function of Mach number, an important implication when considering the use of low speed experimental testing and associated CFD validation in engine blade tip design
This record has no associated files available for download.
More information
Published date: 2009
Venue - Dates:
ASME Turbo Expo 2009: Power for Land, Sea, and Air (GT2009), Orlando, United States, 2009-06-08 - 2009-06-12
Organisations:
Aerodynamics & Flight Mechanics Group
Identifiers
Local EPrints ID: 334482
URI: http://eprints.soton.ac.uk/id/eprint/334482
ISBN: 978-0-7918-4884-5
PURE UUID: 07f93be7-9446-4548-bc5c-8b5d7a6c4b93
Catalogue record
Date deposited: 09 Mar 2012 08:38
Last modified: 14 Mar 2024 10:35
Export record
Altmetrics
Contributors
Author:
Andrew P.S. Wheeler
Author:
Nicholas R. Atkins
Author:
Li He
Download statistics
Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.
View more statistics