Stair climbing is more critical than walking in pre-clinical assessment of primary stability in cementless THA in vitro
Stair climbing is more critical than walking in pre-clinical assessment of primary stability in cementless THA in vitro
Pre-clinical testing of hip endoprostheses is a mandatory requirement before clinical release. Inadequate loading conditions may lead to lower elastic and plastic interface movements than those occurring postoperatively in vivo. This study investigated the influence of patient activity on the primary stability of cementless prostheses with a special emphasis on active simulation of muscle forces. A loading set-up, based on validated musculo-skeletal analyses, was used to generate the hip contact force during walking and stair climbing by transmitting muscle forces through the femur. In addition, a loading configuration which only generated the hip contact force occurring during stair climbing at the prosthesis head was simulated. CLS prostheses were implanted in 18 composite femora and subjected to cyclical loading. The relative micro-movements at the bone-prosthesis interface were determined and appeared to be extremely sensitive to the specific patient activity. Compared to walking, stair climbing generated higher micro-movements, with pronounced axial and rotational components. Stair climbing with the femur loaded by the resultant hip contact force only exhibited a characteristic valgus tilt of the stem with significantly lower interface micro-movements than under active simulation of muscle forces. The analyses suggest that stair climbing induced the highest mechanical instability at the bone-prosthesis interface, a level which may compromise the necessary osseointegration process. Active simulation of muscle forces considerably affects the primary stability of cementless hip endoprostheses. Pre-clinical in vitro tests should therefore simulate stair climbing and include muscle activity in the assessment of initial implant stability, otherwise micro-movements may be underestimated and the primary stability overestimated.
Cementless tha, muscle loading, primary stability, micro-movements, in vitro
1143-1154
Kassi, J.P.
41777fbb-4817-4753-ae88-1ee1b8d94b31
Heller, M.O.
3da19d2a-f34d-4ff1-8a34-9b5a7e695829
Stoeckle, U.
000858b5-9ce7-487a-8bf9-f6bb415b304c
Perka, C.
075d2c0e-b277-4a76-8b14-548bce0bb133
Duda, G.N.
32d09622-34ad-49dd-8314-3f61c99a764e
May 2005
Kassi, J.P.
41777fbb-4817-4753-ae88-1ee1b8d94b31
Heller, M.O.
3da19d2a-f34d-4ff1-8a34-9b5a7e695829
Stoeckle, U.
000858b5-9ce7-487a-8bf9-f6bb415b304c
Perka, C.
075d2c0e-b277-4a76-8b14-548bce0bb133
Duda, G.N.
32d09622-34ad-49dd-8314-3f61c99a764e
Kassi, J.P., Heller, M.O., Stoeckle, U., Perka, C. and Duda, G.N.
(2005)
Stair climbing is more critical than walking in pre-clinical assessment of primary stability in cementless THA in vitro.
Journal of Biomechanics, 38 (5), .
(doi:10.1016/j.jbiomech.2004.05.023).
Abstract
Pre-clinical testing of hip endoprostheses is a mandatory requirement before clinical release. Inadequate loading conditions may lead to lower elastic and plastic interface movements than those occurring postoperatively in vivo. This study investigated the influence of patient activity on the primary stability of cementless prostheses with a special emphasis on active simulation of muscle forces. A loading set-up, based on validated musculo-skeletal analyses, was used to generate the hip contact force during walking and stair climbing by transmitting muscle forces through the femur. In addition, a loading configuration which only generated the hip contact force occurring during stair climbing at the prosthesis head was simulated. CLS prostheses were implanted in 18 composite femora and subjected to cyclical loading. The relative micro-movements at the bone-prosthesis interface were determined and appeared to be extremely sensitive to the specific patient activity. Compared to walking, stair climbing generated higher micro-movements, with pronounced axial and rotational components. Stair climbing with the femur loaded by the resultant hip contact force only exhibited a characteristic valgus tilt of the stem with significantly lower interface micro-movements than under active simulation of muscle forces. The analyses suggest that stair climbing induced the highest mechanical instability at the bone-prosthesis interface, a level which may compromise the necessary osseointegration process. Active simulation of muscle forces considerably affects the primary stability of cementless hip endoprostheses. Pre-clinical in vitro tests should therefore simulate stair climbing and include muscle activity in the assessment of initial implant stability, otherwise micro-movements may be underestimated and the primary stability overestimated.
This record has no associated files available for download.
More information
Published date: May 2005
Keywords:
Cementless tha, muscle loading, primary stability, micro-movements, in vitro
Organisations:
Bioengineering Group
Identifiers
Local EPrints ID: 348507
URI: http://eprints.soton.ac.uk/id/eprint/348507
ISSN: 0021-9290
PURE UUID: 40f77537-7901-466b-93cb-008d75ceb53f
Catalogue record
Date deposited: 26 Feb 2013 12:14
Last modified: 15 Mar 2024 03:43
Export record
Altmetrics
Contributors
Author:
J.P. Kassi
Author:
U. Stoeckle
Author:
C. Perka
Author:
G.N. Duda
Download statistics
Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.
View more statistics