Erbium-doped fibre amplifiers operating at 1.5µm
Erbium-doped fibre amplifiers operating at 1.5µm
The field of rare-earth-doped fibre lasers and amplifiers has expanded rapidly in recent years and there are now several groups working actively in the area. A variety of glass hosts, dopants and pump sources have been used, with the goal of achieving low-threshold, diode-laser-pumped operation of fibre lasers and amplifiers, particularly those operating in either the second or third telecommunication windows. The small core size of the single-mode fibre allows high pump intensities for modest (~mW) pump powers. Moreover, the intensity can be maintained over long lengths and this leads to ultra-low lasing thresholds and even permits CW diode-laser-pumped operation of three-level lasers. In conjunction with the long fluorescent lifetime of rare-earths in glass, the high pump intensity allows high-gain (>30dB) operation of fibre amplifiers with excellent saturation properties. In addition, compatibility with existing fibre components is excellent, allowing all-optical fibre circuitry to be assembled with both active and passive components. This is particularly beneficial for the fibre amplifier, where splicing of the active fibre into the telecommunication link virtually eliminates troublesome Fresnel-reflection feedback which normally limits the gain in semiconductor laser amplifiers.
The configuration of a rare-earth-doped fibre amplifier is shown in Fig. 1. Using Er3+ as a dopant, exceptionally high gains (26dB) have been obtained at a wavelength of 1.536µm, for modulation rates up to 400MHz. The amplifier is optically pumped using any one of a variety of wavelengths. The input equivalent noise power has been measured at -42dBm at a bit rate of 140Mb/s which compares favourably with state-of-the-art APD detectors at 1.54µm. A maximum output power of +13dBm has been achieved before onset of saturation. These early results demonstrate that Er3+-doped fibre amplifiers possess excellent gain and noise characteristics which make them attractive as wideband amplifiers and repeaters for multi-channel optical transmission systems.
Laming, R.I.
c86f359b-9145-4148-bc7d-ae4f3d272ca2
Payne, D.N.
4f592b24-707f-456e-b2c6-8a6f750e296d
Reekie, L.
ec314137-6924-44ad-86a4-ff3f9a67c1b5
Morkel, P.R.
51a7c599-5f6a-4b31-81ee-1de7b09ee0de
January 1989
Laming, R.I.
c86f359b-9145-4148-bc7d-ae4f3d272ca2
Payne, D.N.
4f592b24-707f-456e-b2c6-8a6f750e296d
Reekie, L.
ec314137-6924-44ad-86a4-ff3f9a67c1b5
Morkel, P.R.
51a7c599-5f6a-4b31-81ee-1de7b09ee0de
Laming, R.I., Payne, D.N., Reekie, L. and Morkel, P.R.
(1989)
Erbium-doped fibre amplifiers operating at 1.5µm.
OCTIMA, Rome, Italy.
24 - 26 Jan 1989.
Record type:
Conference or Workshop Item
(Other)
Abstract
The field of rare-earth-doped fibre lasers and amplifiers has expanded rapidly in recent years and there are now several groups working actively in the area. A variety of glass hosts, dopants and pump sources have been used, with the goal of achieving low-threshold, diode-laser-pumped operation of fibre lasers and amplifiers, particularly those operating in either the second or third telecommunication windows. The small core size of the single-mode fibre allows high pump intensities for modest (~mW) pump powers. Moreover, the intensity can be maintained over long lengths and this leads to ultra-low lasing thresholds and even permits CW diode-laser-pumped operation of three-level lasers. In conjunction with the long fluorescent lifetime of rare-earths in glass, the high pump intensity allows high-gain (>30dB) operation of fibre amplifiers with excellent saturation properties. In addition, compatibility with existing fibre components is excellent, allowing all-optical fibre circuitry to be assembled with both active and passive components. This is particularly beneficial for the fibre amplifier, where splicing of the active fibre into the telecommunication link virtually eliminates troublesome Fresnel-reflection feedback which normally limits the gain in semiconductor laser amplifiers.
The configuration of a rare-earth-doped fibre amplifier is shown in Fig. 1. Using Er3+ as a dopant, exceptionally high gains (26dB) have been obtained at a wavelength of 1.536µm, for modulation rates up to 400MHz. The amplifier is optically pumped using any one of a variety of wavelengths. The input equivalent noise power has been measured at -42dBm at a bit rate of 140Mb/s which compares favourably with state-of-the-art APD detectors at 1.54µm. A maximum output power of +13dBm has been achieved before onset of saturation. These early results demonstrate that Er3+-doped fibre amplifiers possess excellent gain and noise characteristics which make them attractive as wideband amplifiers and repeaters for multi-channel optical transmission systems.
Text
388.pdf
- Author's Original
More information
Published date: January 1989
Venue - Dates:
OCTIMA, Rome, Italy, 1989-01-24 - 1989-01-26
Identifiers
Local EPrints ID: 351922
URI: http://eprints.soton.ac.uk/id/eprint/351922
PURE UUID: f41505c5-b138-41b4-94d5-7c890fc1f0f2
Catalogue record
Date deposited: 14 May 2013 15:49
Last modified: 14 Mar 2024 13:45
Export record
Contributors
Author:
R.I. Laming
Author:
L. Reekie
Author:
P.R. Morkel
Download statistics
Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.
View more statistics