The University of Southampton
University of Southampton Institutional Repository

Solar thermoelectric generators fabricated on a silicon-on-insulator substrate

Solar thermoelectric generators fabricated on a silicon-on-insulator substrate
Solar thermoelectric generators fabricated on a silicon-on-insulator substrate
Solar thermal power generation is an attractive electricity generation technology as it is environment-friendly, has the potential for increased efficiency, and has high reliability. The design, modelling, and evaluation of solar thermoelectric generators (STEGs) fabricated on a silicon-on-insulator substrate are presented in this paper. Solar concentration is achieved by using a focusing lens to concentrate solar input onto the membrane of the STEG. A thermal model is developed based on energy balance and heat transfer equations using lumped thermal conductances. This thermal model is shown to be in good agreement with actual measurement results. For a 1 W laser input with a spot size of 1 mm, a maximum open-circuit voltage of 3.06 V is obtained, which translates to a temperature difference of 226 °C across the thermoelements and delivers 25 µW of output power under matched load conditions. Based on solar simulator measurements, a maximum TEG voltage of 803 mV was achieved by using a 50.8 mm diameter plano-convex lens to focus solar input to a TEG with a length of 1000 µm, width of 15 µm, membrane diameter of 3 mm, and 114 thermocouples. This translates to a temperature difference of 18 °C across the thermoelements and an output power under matched load conditions of 431 nW.

This paper demonstrates that by utilizing a solar concentrator to focus solar radiation onto the hot junction of a TEG, the temperature difference across the device is increased; subsequently improving the TEG's efficiency. By using materials that are compatible with standard CMOS and MEMS processes, integration of solar-driven TEGs with on-chip electronics is seen to be a viable way of solar energy harvesting where the resulting microscale system is envisioned to have promising applications in on-board power sources, sensor networks, and autonomous microsystems.
0960-1317
1-13
de Leon, Maria Theresa
779b393c-38ac-47dd-b960-818eda45de2c
Chong, Harold
795aa67f-29e5-480f-b1bc-9bd5c0d558e1
Kraft, Michael
54927621-738f-4d40-af56-a027f686b59f
de Leon, Maria Theresa
779b393c-38ac-47dd-b960-818eda45de2c
Chong, Harold
795aa67f-29e5-480f-b1bc-9bd5c0d558e1
Kraft, Michael
54927621-738f-4d40-af56-a027f686b59f

de Leon, Maria Theresa, Chong, Harold and Kraft, Michael (2014) Solar thermoelectric generators fabricated on a silicon-on-insulator substrate. Journal of Micromechanics and Microengineering, 24, 1-13. (doi:10.1088/0960-1317/24/8/085011).

Record type: Article

Abstract

Solar thermal power generation is an attractive electricity generation technology as it is environment-friendly, has the potential for increased efficiency, and has high reliability. The design, modelling, and evaluation of solar thermoelectric generators (STEGs) fabricated on a silicon-on-insulator substrate are presented in this paper. Solar concentration is achieved by using a focusing lens to concentrate solar input onto the membrane of the STEG. A thermal model is developed based on energy balance and heat transfer equations using lumped thermal conductances. This thermal model is shown to be in good agreement with actual measurement results. For a 1 W laser input with a spot size of 1 mm, a maximum open-circuit voltage of 3.06 V is obtained, which translates to a temperature difference of 226 °C across the thermoelements and delivers 25 µW of output power under matched load conditions. Based on solar simulator measurements, a maximum TEG voltage of 803 mV was achieved by using a 50.8 mm diameter plano-convex lens to focus solar input to a TEG with a length of 1000 µm, width of 15 µm, membrane diameter of 3 mm, and 114 thermocouples. This translates to a temperature difference of 18 °C across the thermoelements and an output power under matched load conditions of 431 nW.

This paper demonstrates that by utilizing a solar concentrator to focus solar radiation onto the hot junction of a TEG, the temperature difference across the device is increased; subsequently improving the TEG's efficiency. By using materials that are compatible with standard CMOS and MEMS processes, integration of solar-driven TEGs with on-chip electronics is seen to be a viable way of solar energy harvesting where the resulting microscale system is envisioned to have promising applications in on-board power sources, sensor networks, and autonomous microsystems.

Text
0960-1317_24_8_085011.pdf - Version of Record
Restricted to Repository staff only
Request a copy

More information

Accepted/In Press date: 16 June 2014
e-pub ahead of print date: 28 July 2014
Published date: 1 August 2014
Organisations: Nanoelectronics and Nanotechnology

Identifiers

Local EPrints ID: 367542
URI: http://eprints.soton.ac.uk/id/eprint/367542
ISSN: 0960-1317
PURE UUID: ee7154a3-4b4a-489e-a489-38e16f5becc0
ORCID for Harold Chong: ORCID iD orcid.org/0000-0002-7110-5761

Catalogue record

Date deposited: 31 Jul 2014 13:07
Last modified: 15 Mar 2024 03:30

Export record

Altmetrics

Contributors

Author: Maria Theresa de Leon
Author: Harold Chong ORCID iD
Author: Michael Kraft

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×