The University of Southampton
University of Southampton Institutional Repository

Fully resolved simulation of particle deposition and heat transfer in a differentially heated cavity

Fully resolved simulation of particle deposition and heat transfer in a differentially heated cavity
Fully resolved simulation of particle deposition and heat transfer in a differentially heated cavity
In this paper a fictitious domain method is used to study the motion of particles in a differentially heated cavity. A collision strategy is implemented which is validated using the problem of two freely falling particles with natural convection taking place from the leading hot particle. The motion of the particles in a differentially heated cavity is considered where the vertical walls are subject to a temperature difference ?T?T whereas horizontal walls are assumed to be adiabatic. Depending on the fluid Grashof number different flow regimes and two critical Grashof numbers are identified. Sustained motion of the suspended particles is also studied and different behaviour is observed compared to the limiting case of tracer particles where simulations are usually performed using one-way coupled point-particle assumptions. Finally the effects of the particles on the heat transfer from the hot wall are studied and it is found that addition of large particles can adversely influence the heat transfer rate. However, if hot particles are effectively removed from the wall, e.g. by increasing the Grashof number, wall heat transfer properties can still be enhanced.
particulate flow, fictitious domain, GPU acceleration, differentially heated cavity, natural convection, direct numerical simulation
0142-727X
1-15
Haeri, S.
8e2f9ded-d4c7-4ae3-9fdb-db91f5f9ba9e
Shrimpton, J.S.
9cf82d2e-2f00-4ddf-bd19-9aff443784af
Haeri, S.
8e2f9ded-d4c7-4ae3-9fdb-db91f5f9ba9e
Shrimpton, J.S.
9cf82d2e-2f00-4ddf-bd19-9aff443784af

Haeri, S. and Shrimpton, J.S. (2014) Fully resolved simulation of particle deposition and heat transfer in a differentially heated cavity. International Journal of Heat and Fluid Flow, 1-15. (doi:10.1016/j.ijheatfluidflow.2014.04.009).

Record type: Article

Abstract

In this paper a fictitious domain method is used to study the motion of particles in a differentially heated cavity. A collision strategy is implemented which is validated using the problem of two freely falling particles with natural convection taking place from the leading hot particle. The motion of the particles in a differentially heated cavity is considered where the vertical walls are subject to a temperature difference ?T?T whereas horizontal walls are assumed to be adiabatic. Depending on the fluid Grashof number different flow regimes and two critical Grashof numbers are identified. Sustained motion of the suspended particles is also studied and different behaviour is observed compared to the limiting case of tracer particles where simulations are usually performed using one-way coupled point-particle assumptions. Finally the effects of the particles on the heat transfer from the hot wall are studied and it is found that addition of large particles can adversely influence the heat transfer rate. However, if hot particles are effectively removed from the wall, e.g. by increasing the Grashof number, wall heat transfer properties can still be enhanced.

This record has no associated files available for download.

More information

e-pub ahead of print date: 9 June 2014
Published date: December 2014
Keywords: particulate flow, fictitious domain, GPU acceleration, differentially heated cavity, natural convection, direct numerical simulation
Organisations: Aeronautics, Astronautics & Comp. Eng

Identifiers

Local EPrints ID: 367572
URI: http://eprints.soton.ac.uk/id/eprint/367572
ISSN: 0142-727X
PURE UUID: b8aeeaec-c877-448a-99d7-1b5632d4fb46

Catalogue record

Date deposited: 01 Aug 2014 12:09
Last modified: 14 Mar 2024 17:33

Export record

Altmetrics

Contributors

Author: S. Haeri
Author: J.S. Shrimpton

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×