Effects of pressure on cellular flame structure of high hydrogen content lean premixed syngas spherical flames: a DNS study
Effects of pressure on cellular flame structure of high hydrogen content lean premixed syngas spherical flames: a DNS study
The structure and propagation of turbulent lean premixed high hydrogen content syngas flames at pressure values of 1bar, 2bar and 4bar are studied using three-dimensional direct numerical simulations. Simulations for each pressure considered were performed for three different initial turbulence levels at the turbulent Reynolds numbers of 50, 100 and 150. The DNS of expanding spherical flames has taken into account detailed chemical kinetics and preferential diffusion effects. The mixture-averaged transport model has been employed. Effects of pressure on flame structures, heat release rate and radical species distributions under low to high initial turbulent conditions are examined. The results show that elevated pressures greatly influence the cellular flame structure of syngas spherical flames under different initial turbulent conditions. At the atmospheric pressure, the flame shows weakly wrinkling structures due to the initial turbulence level imposed in the simulation. At elevated pressures under turbulence conditions, the flame develops cellular burning structures, superimposed by flame wrinkles due to turbulence. It is shown that highly wrinkled cells that develop over the surface of a spherical flame increase its area and thereby the global propagation speed at elevated pressures. Results show noticeable increases in the local heat release rate with increasing pressure. The analysis also reveals the formation of cusped structures with low heat release rate values in areas of negative curvatures at elevated pressures, in agreement with previous studies. The joint probability density functions of OH radical mass fraction and temperature show broadening OH values in the high temperature zone at elevated pressures compared to its distribution at the atmospheric pressure. Comparisons of mean species distributions of OH and HO2 over temperature between laminar and turbulent flames show that pressure elevation has a major influence on the flame structure in the composition space.
21516-21531
Ranga Dinesh, K.K.J
6454b22c-f505-40f9-8ad4-a1168e8f87cd
Shalaby, H
b77f9d81-2444-4c52-add3-5a3918b97505
Luo, K.H
ebb53ff9-54e4-404d-9ae1-ce80d62587cd
van Oijen, J. A
742976d2-1bf7-40b4-a3a9-0b185bd24ed6
Thevenin, D
0190da9a-c594-4213-9fda-e755e80a9349
16 November 2016
Ranga Dinesh, K.K.J
6454b22c-f505-40f9-8ad4-a1168e8f87cd
Shalaby, H
b77f9d81-2444-4c52-add3-5a3918b97505
Luo, K.H
ebb53ff9-54e4-404d-9ae1-ce80d62587cd
van Oijen, J. A
742976d2-1bf7-40b4-a3a9-0b185bd24ed6
Thevenin, D
0190da9a-c594-4213-9fda-e755e80a9349
Ranga Dinesh, K.K.J, Shalaby, H, Luo, K.H, van Oijen, J. A and Thevenin, D
(2016)
Effects of pressure on cellular flame structure of high hydrogen content lean premixed syngas spherical flames: a DNS study.
International Journal of Hydrogen Energy, 41 (46), .
(doi:10.1016/j.ijhydene.2016.09.181).
Abstract
The structure and propagation of turbulent lean premixed high hydrogen content syngas flames at pressure values of 1bar, 2bar and 4bar are studied using three-dimensional direct numerical simulations. Simulations for each pressure considered were performed for three different initial turbulence levels at the turbulent Reynolds numbers of 50, 100 and 150. The DNS of expanding spherical flames has taken into account detailed chemical kinetics and preferential diffusion effects. The mixture-averaged transport model has been employed. Effects of pressure on flame structures, heat release rate and radical species distributions under low to high initial turbulent conditions are examined. The results show that elevated pressures greatly influence the cellular flame structure of syngas spherical flames under different initial turbulent conditions. At the atmospheric pressure, the flame shows weakly wrinkling structures due to the initial turbulence level imposed in the simulation. At elevated pressures under turbulence conditions, the flame develops cellular burning structures, superimposed by flame wrinkles due to turbulence. It is shown that highly wrinkled cells that develop over the surface of a spherical flame increase its area and thereby the global propagation speed at elevated pressures. Results show noticeable increases in the local heat release rate with increasing pressure. The analysis also reveals the formation of cusped structures with low heat release rate values in areas of negative curvatures at elevated pressures, in agreement with previous studies. The joint probability density functions of OH radical mass fraction and temperature show broadening OH values in the high temperature zone at elevated pressures compared to its distribution at the atmospheric pressure. Comparisons of mean species distributions of OH and HO2 over temperature between laminar and turbulent flames show that pressure elevation has a major influence on the flame structure in the composition space.
Text
__soton.ac.uk_ude_PersonalFiles_Users_jkk1d12_mydocuments_RANGADINESH_SOTON2013TO2017_JournalPapersforEprints_2016_HE2_2016.doc
- Accepted Manuscript
More information
Accepted/In Press date: 26 September 2016
e-pub ahead of print date: 13 October 2016
Published date: 16 November 2016
Organisations:
Energy Technology Group
Identifiers
Local EPrints ID: 403028
URI: http://eprints.soton.ac.uk/id/eprint/403028
ISSN: 0360-3199
PURE UUID: 5f50d4e2-c9f8-428b-9610-19b4627af467
Catalogue record
Date deposited: 17 Nov 2016 12:31
Last modified: 15 Mar 2024 03:47
Export record
Altmetrics
Contributors
Author:
H Shalaby
Author:
K.H Luo
Author:
J. A van Oijen
Author:
D Thevenin
Download statistics
Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.
View more statistics