The influence of point defects on the entropy profiles of Lithium Ion Battery cathodes: a lattice-gas Monte Carlo study
The influence of point defects on the entropy profiles of Lithium Ion Battery cathodes: a lattice-gas Monte Carlo study
In-situ diagnostic tools have become established to as a means to understanding the aging processes that occur during charge/discharge cycles in Li-ion batteries (LIBs). One electrochemical thermodynamic technique that can be applied to this problem is known as entropy profiling. Entropy profiles are obtained by monitoring the variation in the open circuit potential as a function of temperature. The peaks in these profiles are related to phase transitions, such as order/disorder transitions, in the lattice. In battery aging studies of cathode materials, the peaks become suppressed but the mechanism by which this occurs is currently poorly understood. One suggested mechanism is the formation of point defects. Intentional modifications of LIB electrodes may also lead to the introduction of point defects. To gain quantitative understanding of the entropy profile changes that could be caused by point defects, we have performed Monte Carlo simulations on lattices of variable defect content. As a model cathode, we have chosen manganese spinel, which has a well-described order-disorder transition when it is half filled with Li. We assume, in the case of trivalent defect substitution (M = Cr,Co) that each defect M permanently pins one Li atom. This assumption is supported by Density Functional Theory (DFT) calculations. Assuming that the distribution of the pinned Li sites is completely random, we observe the same trend in the change in partial molar entropy with defect content as observed in experiment: the peak amplitudes become increasing suppressed as the defect fraction is increased. We also examine changes in the configurational entropy itself, rather than the entropy change, as a function of the defect fraction and analyse these results with respect to the ones expected for an ideal solid solution. We discuss the implications of the quantitative differences between some of the results obtained from the model and the experimentally observed ones.
Mercer, Michael
d1f983bf-4e74-4a80-b670-372ac0d8a1d7
Finnigan, Sophie
09074132-a717-4759-9c05-56c47d5d6473
Kramer, Denis
1faae37a-fab7-4edd-99ee-ae4c30d3cde4
Richards, Daniel
82f7e937-0fe3-4fc6-b0d9-be4b184a1864
Hoster, Harry
f4edfa35-d450-4855-b76e-738903d355d6
Mercer, Michael
d1f983bf-4e74-4a80-b670-372ac0d8a1d7
Finnigan, Sophie
09074132-a717-4759-9c05-56c47d5d6473
Kramer, Denis
1faae37a-fab7-4edd-99ee-ae4c30d3cde4
Richards, Daniel
82f7e937-0fe3-4fc6-b0d9-be4b184a1864
Hoster, Harry
f4edfa35-d450-4855-b76e-738903d355d6
Mercer, Michael, Finnigan, Sophie, Kramer, Denis, Richards, Daniel and Hoster, Harry
(2017)
The influence of point defects on the entropy profiles of Lithium Ion Battery cathodes: a lattice-gas Monte Carlo study.
Electrochimica Acta.
(doi:10.1016/j.electacta.2017.04.115).
(In Press)
Abstract
In-situ diagnostic tools have become established to as a means to understanding the aging processes that occur during charge/discharge cycles in Li-ion batteries (LIBs). One electrochemical thermodynamic technique that can be applied to this problem is known as entropy profiling. Entropy profiles are obtained by monitoring the variation in the open circuit potential as a function of temperature. The peaks in these profiles are related to phase transitions, such as order/disorder transitions, in the lattice. In battery aging studies of cathode materials, the peaks become suppressed but the mechanism by which this occurs is currently poorly understood. One suggested mechanism is the formation of point defects. Intentional modifications of LIB electrodes may also lead to the introduction of point defects. To gain quantitative understanding of the entropy profile changes that could be caused by point defects, we have performed Monte Carlo simulations on lattices of variable defect content. As a model cathode, we have chosen manganese spinel, which has a well-described order-disorder transition when it is half filled with Li. We assume, in the case of trivalent defect substitution (M = Cr,Co) that each defect M permanently pins one Li atom. This assumption is supported by Density Functional Theory (DFT) calculations. Assuming that the distribution of the pinned Li sites is completely random, we observe the same trend in the change in partial molar entropy with defect content as observed in experiment: the peak amplitudes become increasing suppressed as the defect fraction is increased. We also examine changes in the configurational entropy itself, rather than the entropy change, as a function of the defect fraction and analyse these results with respect to the ones expected for an ideal solid solution. We discuss the implications of the quantitative differences between some of the results obtained from the model and the experimentally observed ones.
Text
1-s2.0-S0013468617308836-main
- Accepted Manuscript
More information
Accepted/In Press date: 24 April 2017
Organisations:
Engineering Mats & Surface Engineerg Gp
Identifiers
Local EPrints ID: 407961
URI: http://eprints.soton.ac.uk/id/eprint/407961
ISSN: 0013-4686
PURE UUID: 1cac34be-4a25-4047-b3f3-37561b10b2d3
Catalogue record
Date deposited: 05 May 2017 01:06
Last modified: 16 Mar 2024 05:17
Export record
Altmetrics
Contributors
Author:
Michael Mercer
Author:
Sophie Finnigan
Author:
Daniel Richards
Author:
Harry Hoster
Download statistics
Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.
View more statistics