The University of Southampton
University of Southampton Institutional Repository

Effect of surface heave on response of partially embedded pipelines on clay

Effect of surface heave on response of partially embedded pipelines on clay
Effect of surface heave on response of partially embedded pipelines on clay

The as-laid embedment of an on-bottom pipeline strongly influences the resulting thermal insulation, and the resistance to subsequent axial and lateral movement of the pipeline. Reliable assessment of these parameters is essential for the design of offshore pipelines. Static vertical penetration of a pipe into a soft clay seabed-which can be modeled as an undrained process - causes heave of soil on each side of the pipeline. The heaved soil contributes to the vertical penetration resistance and the horizontal capacity. This paper describes a series of large deformation finite-element analyses of pipe penetration, supported by a simple analytical assessment of the heave process. The conventional bearing capacity approach to the analysis of pipe penetration is reviewed, and modifications for the effects of soil weight and heave are presented. It is shown that in soft soil conditions - which are typical for deep water - the soil self-weight contributes a significant portion of the vertical penetration resistance and horizontal capacity. If heave is neglected, the soil weight leads to a vertical force due to buoyancy, based on Archimedes' principle. When heave is considered, the soil weight contributes an additional component of vertical load, exceeding simple buoyancy, due to the distorted geometry of the soil surface. Archimedes' principle does not apply. The finite-element analyses, benchmarked against rigorous plasticity solutions, are used to calibrate simple expressions for predicting static vertical pipe penetration, and the resulting horizontal capacity. These simple solutions allow the conventional bearing capacity approach to be used in a manner which correctly accounts for the effects of soil self-weight and heave. An approximate solution for predicting the "local" pipe embedment - relative to the raised soil level immediately adjacent to the pipe - is derived. The local embedment significantly exceeds the nominal embedment relative to the original soil surface. This effect counteracts the tendency for heave to reduce the embedment by raising the penetration resistance.

Clays, Cohesive soils, Collapse loads, Embedment, Finite element method, Offshore structures, Pipelines, Plasticity, Soil mechanics
1090-0241
819-829
Merifield, R.S.
e0df4fb1-76a4-4446-86ef-38bd7481dfec
White, D.J.
a986033d-d26d-4419-a3f3-20dc54efce93
Randolph, M.F.
75caa33a-e630-4ae8-84cd-758797bf9633
Merifield, R.S.
e0df4fb1-76a4-4446-86ef-38bd7481dfec
White, D.J.
a986033d-d26d-4419-a3f3-20dc54efce93
Randolph, M.F.
75caa33a-e630-4ae8-84cd-758797bf9633

Merifield, R.S., White, D.J. and Randolph, M.F. (2009) Effect of surface heave on response of partially embedded pipelines on clay. Journal of Geotechnical and Geoenvironmental Engineering, 135 (6), 819-829. (doi:10.1061/(ASCE)GT.1943-5606.0000070).

Record type: Article

Abstract

The as-laid embedment of an on-bottom pipeline strongly influences the resulting thermal insulation, and the resistance to subsequent axial and lateral movement of the pipeline. Reliable assessment of these parameters is essential for the design of offshore pipelines. Static vertical penetration of a pipe into a soft clay seabed-which can be modeled as an undrained process - causes heave of soil on each side of the pipeline. The heaved soil contributes to the vertical penetration resistance and the horizontal capacity. This paper describes a series of large deformation finite-element analyses of pipe penetration, supported by a simple analytical assessment of the heave process. The conventional bearing capacity approach to the analysis of pipe penetration is reviewed, and modifications for the effects of soil weight and heave are presented. It is shown that in soft soil conditions - which are typical for deep water - the soil self-weight contributes a significant portion of the vertical penetration resistance and horizontal capacity. If heave is neglected, the soil weight leads to a vertical force due to buoyancy, based on Archimedes' principle. When heave is considered, the soil weight contributes an additional component of vertical load, exceeding simple buoyancy, due to the distorted geometry of the soil surface. Archimedes' principle does not apply. The finite-element analyses, benchmarked against rigorous plasticity solutions, are used to calibrate simple expressions for predicting static vertical pipe penetration, and the resulting horizontal capacity. These simple solutions allow the conventional bearing capacity approach to be used in a manner which correctly accounts for the effects of soil self-weight and heave. An approximate solution for predicting the "local" pipe embedment - relative to the raised soil level immediately adjacent to the pipe - is derived. The local embedment significantly exceeds the nominal embedment relative to the original soil surface. This effect counteracts the tendency for heave to reduce the embedment by raising the penetration resistance.

This record has no associated files available for download.

More information

Accepted/In Press date: 29 September 2008
e-pub ahead of print date: 19 February 2009
Published date: June 2009
Keywords: Clays, Cohesive soils, Collapse loads, Embedment, Finite element method, Offshore structures, Pipelines, Plasticity, Soil mechanics

Identifiers

Local EPrints ID: 419874
URI: http://eprints.soton.ac.uk/id/eprint/419874
ISSN: 1090-0241
PURE UUID: 66034e01-a206-49b9-979c-bea5a29427dd
ORCID for D.J. White: ORCID iD orcid.org/0000-0002-2968-582X

Catalogue record

Date deposited: 23 Apr 2018 16:30
Last modified: 06 Jun 2024 02:00

Export record

Altmetrics

Contributors

Author: R.S. Merifield
Author: D.J. White ORCID iD
Author: M.F. Randolph

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×