Multi-user hybrid beamforming relying on learning-aided link-adaptation for mmWave systems
Multi-user hybrid beamforming relying on learning-aided link-adaptation for mmWave systems
Hybrid beamforming (HBF) relying on a large antenna array is conceived for millimeter wave (mmWave) systems, where the beamforming (BF) gain compensates for the propagation loss experienced. The BF gain required for a successful transmission depends on the user’s distance from the base station (BS). For the geographically separated users of a multi-user mmWave system, the BF gain requirements of different users tend to be different. On the other hand, the BF gain is directly related to the number of antenna
elements (AEs) of the array. Therefore, in this paper, we propose a HBF design for the downlink of multi-user mmWave systems, where the number of AEs employed at the BS for attaining BF gains per user is dependent on the user’s distance. We then propose grouping of the RF chains at the BS, where each group of RF chains serves a specific group of users depending on the nature of the channel. Furthermore, to support the escalating data rate demands, the exploitation of link-adaptation techniques constitutes a promising solution, since the rate can be maximized for each link while maintaining a specific target bit error rate (BER). However, given the time-varying nature of the wireless channel and the non-linearities of the amplifiers, especially at mmWave frequencies, the performance of conventional link adaptation relying on pre-defined threshold values degrades significantly. Therefore, we additionally propose a two-stage link adaptation scheme. Specifically, in the first stage we switch on or off both the digital precoder and the combiner depending on the nature of the channel, while in the second stage a machine-learning assisted link-adaptation is proposed, where the receiver predicts whether to request spatial multiplexing- or diversity-aided transmission from the BS for every new channel realization. We
demonstrate by simulation that having both a digital precoder and a combiner in a single dominant path scenario is redundant. Furthermore, our simulations show that the learning assisted adaptation provides significantly higher data rates than that of the conventional link-adaptation, where the reconfiguration decision is simply based on pre-defined threshold values.
Katla, Satyanarayana
f3436daa-e5da-4b3c-ab4b-ad07a0cef99a
El-Hajjar, Mohammed
3a829028-a427-4123-b885-2bab81a44b6f
Hanzo, Lajos
66e7266f-3066-4fc0-8391-e000acce71a1
Katla, Satyanarayana
f3436daa-e5da-4b3c-ab4b-ad07a0cef99a
El-Hajjar, Mohammed
3a829028-a427-4123-b885-2bab81a44b6f
Hanzo, Lajos
66e7266f-3066-4fc0-8391-e000acce71a1
Katla, Satyanarayana, El-Hajjar, Mohammed and Hanzo, Lajos
(2019)
Multi-user hybrid beamforming relying on learning-aided link-adaptation for mmWave systems.
IEEE Access.
(doi:10.1109/ACCESS.2019.2900008).
Abstract
Hybrid beamforming (HBF) relying on a large antenna array is conceived for millimeter wave (mmWave) systems, where the beamforming (BF) gain compensates for the propagation loss experienced. The BF gain required for a successful transmission depends on the user’s distance from the base station (BS). For the geographically separated users of a multi-user mmWave system, the BF gain requirements of different users tend to be different. On the other hand, the BF gain is directly related to the number of antenna
elements (AEs) of the array. Therefore, in this paper, we propose a HBF design for the downlink of multi-user mmWave systems, where the number of AEs employed at the BS for attaining BF gains per user is dependent on the user’s distance. We then propose grouping of the RF chains at the BS, where each group of RF chains serves a specific group of users depending on the nature of the channel. Furthermore, to support the escalating data rate demands, the exploitation of link-adaptation techniques constitutes a promising solution, since the rate can be maximized for each link while maintaining a specific target bit error rate (BER). However, given the time-varying nature of the wireless channel and the non-linearities of the amplifiers, especially at mmWave frequencies, the performance of conventional link adaptation relying on pre-defined threshold values degrades significantly. Therefore, we additionally propose a two-stage link adaptation scheme. Specifically, in the first stage we switch on or off both the digital precoder and the combiner depending on the nature of the channel, while in the second stage a machine-learning assisted link-adaptation is proposed, where the receiver predicts whether to request spatial multiplexing- or diversity-aided transmission from the BS for every new channel realization. We
demonstrate by simulation that having both a digital precoder and a combiner in a single dominant path scenario is redundant. Furthermore, our simulations show that the learning assisted adaptation provides significantly higher data rates than that of the conventional link-adaptation, where the reconfiguration decision is simply based on pre-defined threshold values.
Text
journal_access
- Accepted Manuscript
More information
Accepted/In Press date: 14 February 2019
e-pub ahead of print date: 18 February 2019
Identifiers
Local EPrints ID: 428378
URI: http://eprints.soton.ac.uk/id/eprint/428378
ISSN: 2169-3536
PURE UUID: 24025e76-9286-4e26-b6e2-a188a3e94118
Catalogue record
Date deposited: 22 Feb 2019 17:30
Last modified: 18 Mar 2024 03:22
Export record
Altmetrics
Contributors
Author:
Satyanarayana Katla
Author:
Mohammed El-Hajjar
Author:
Lajos Hanzo
Download statistics
Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.
View more statistics