The University of Southampton
University of Southampton Institutional Repository

Active vibration control of space truss structures: power analysis and energy distribution

Active vibration control of space truss structures: power analysis and energy distribution
Active vibration control of space truss structures: power analysis and energy distribution
This work concerns the analysis of power flow in truss structures, such as those used in space, when active control is used to attenuate vibration levels at some point in the structure. A truss structure consisting of 93 aluminum beams connected by 33 joints is studied. A model of the structure is obtained by the dynamic stiffness method using the exact solution for wave propagation in the beams; the model is also compared to a finite element model of pin-jointed bars to illustrate the localized dynamic behaviour of the structural members of the truss. Joint masses are used in the model, however dissipation is considered to occur only in the beams. Reaction forces for individual beam ends can be calculated after solving the equation of motion for the overall system. Knowing the forces and velocities on a beam end makes it possible to calculate the power flow at that end. The sum of the coupling power at both beam ends gives the power dissipated by that beam. It is found that around 80% of power dissipated is by bending motion of the beams and only 20% of power is transmitted by bending. The principal mechanism of power flow is by longitudinal motion of the beams. Overall power flow and dissipated power is analyzed before and after multichannel feedforward control is implemented in order to help understand the physical mechanisms of this form of active vibration control. Results show that on average, the controller reduces the primary source input power and supplies energy to the system. The amount of energy dissipated by the controller can be neglected, which leads to conclusion that the controller is not dissipative.
383-396
Katholieke Universiteit Leuven
Goncalves, P.
24a2c413-106c-4aed-8f97-cab07b91b251
Elliott, S.
721dc55c-8c3e-4895-b9c4-82f62abd3567
Brennan, M.
87c7bca3-a9e5-46aa-9153-34c712355a13
Goncalves, P.
24a2c413-106c-4aed-8f97-cab07b91b251
Elliott, S.
721dc55c-8c3e-4895-b9c4-82f62abd3567
Brennan, M.
87c7bca3-a9e5-46aa-9153-34c712355a13

Goncalves, P., Elliott, S. and Brennan, M. (2006) Active vibration control of space truss structures: power analysis and energy distribution. In Proceedings of the International Conference on Noise & Vibration Engineering. ISMA 2006. Katholieke Universiteit Leuven. pp. 383-396 .

Record type: Conference or Workshop Item (Paper)

Abstract

This work concerns the analysis of power flow in truss structures, such as those used in space, when active control is used to attenuate vibration levels at some point in the structure. A truss structure consisting of 93 aluminum beams connected by 33 joints is studied. A model of the structure is obtained by the dynamic stiffness method using the exact solution for wave propagation in the beams; the model is also compared to a finite element model of pin-jointed bars to illustrate the localized dynamic behaviour of the structural members of the truss. Joint masses are used in the model, however dissipation is considered to occur only in the beams. Reaction forces for individual beam ends can be calculated after solving the equation of motion for the overall system. Knowing the forces and velocities on a beam end makes it possible to calculate the power flow at that end. The sum of the coupling power at both beam ends gives the power dissipated by that beam. It is found that around 80% of power dissipated is by bending motion of the beams and only 20% of power is transmitted by bending. The principal mechanism of power flow is by longitudinal motion of the beams. Overall power flow and dissipated power is analyzed before and after multichannel feedforward control is implemented in order to help understand the physical mechanisms of this form of active vibration control. Results show that on average, the controller reduces the primary source input power and supplies energy to the system. The amount of energy dissipated by the controller can be neglected, which leads to conclusion that the controller is not dissipative.

This record has no associated files available for download.

More information

Published date: 2006
Additional Information: CD-ROM
Venue - Dates: International Conference on Noise and Vibration Engineering. ISMA 2006, Leuven, Belgium, 2006-09-17 - 2006-09-19

Identifiers

Local EPrints ID: 43381
URI: http://eprints.soton.ac.uk/id/eprint/43381
PURE UUID: a4c5c06a-22c1-4672-a5e9-696cf0aa5432

Catalogue record

Date deposited: 09 Feb 2007
Last modified: 08 Jan 2022 18:59

Export record

Contributors

Author: P. Goncalves
Author: S. Elliott
Author: M. Brennan

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×