READ ME File For 'Dataset: Investigation of fatigue performance of tin-based multilayer coatings with varying locations of an intermetallic sublayer'

Dataset DOI: 10.5258/SOTON/D1399

ReadMe Author: Songsong Lu, University of Southampton [https://orcid.org/0000-0001-7591-434X]

This dataset supports the publication:
AUTHORS: Songsong Lu, Richard Cook, Yi Zhang, Philippa Reed
TITLE: Investigating the fatigue performance of soft multilayer coatings with varying locations of an intermetallic interlayer
JOURNAL: International Journal of Fatigue
PAPER DOI IF KNOWN:


This dataset contains: The data of following figures



The figures are as follows:

Fig. 5  The effect of tin based layer’s thickness on the Ra of Tin-Top layer’s top surface and interfaces between tin based layer and IML layer.
Fig. 8  Grain size of tin along the length direction in different tin based layers with the effect of thickness of tin layer and IML-Top layer, where the location of the intermediate IML-Top layer is increasingly closer to the top surface going from A to D with an unvaried thickness of IML-Top layer (denoted by M).
Fig. 9  (a) Pmax/ΔƐ-N curve for 2IML multilayer coatings with different IML-Top layer’s location, where the location of IML-Top layer is away from top surface from A to D, (b) The effect of IML-Top layer’s location on the fatigue performance. Note: The Tin-Top layer’s thickness represents the location of the intermediate IML-Top Layer as its thickness does not vary.
Fig. 11  The effect of IML-Top layer’s location on the density of Type B cracks. Note: The Tin-Top layer’s thickness was used to represent the location of IML-Top Layer quantitatively as the thickness of IML-Top layer in all 2IML multilayer coatings are similar.
Fig. 12  The ultimate tensile strength (UTS) and yield strength (YS) of Ni/Sn multilayer composite versus bilayer thickness. Note: This multilayer composite is the repeating of a same bilayer architecture (composed by a Nickel layer and a Tin layer with a constant thickness ratio). [21]
Fig. 14  Percentage of surface cracks in 2IML multilayer coatings with different location of IML-Top layer.


Date of data collection: 2018.1-2020.8

Information about geographic location of data collection: University of Southampton

Licence: CC BY

Related projects: Engineering and Physical Sciences Research Council (EPSRC, EP/M50662X/1)



Date that the file was created: 12, 2020