The University of Southampton
University of Southampton Institutional Repository

Power control for a mobile satellite system

Power control for a mobile satellite system
Power control for a mobile satellite system

This thesis describes the design and performance of closed loop power control algorithms for a mobile satellite system. A two-loop control strategy is considered. It consists of a fast-acting 'inner' loop which controls received signal strength to a desired setpoint Pdes (dB) and a slow-acting 'outer' loop which adjusts the setpoint in order to maintain a desired code-word error rate at the receiver, WERdes.

A variety of 'inner' loop controllers were designed. The Predictive 'inner' loop controller forward predicts the channel gain disturbance and then issues appropriate power requests to the transmitter. The linear phase-lag controller attempts to compensate the channel gain disturbance by adopting a suitably large open-loop gain. Phase-lag compensators based on pure Integral, Ragazzini and Smith's design methods were considered. The Variable Step Integral (VSI) controller is shown to be the best choice phase-lag compensator in terms of quality of compensation and control filter complexity. The Predictive controller yields superior compensation at LEO and MEO delays whilst the VSI controller is better suited at GEP delay. The Integro-Predictive (IP) controller is a novel arrangement of a VSI filter followed by a forward predictor. The predictor allows the VSI filter to adopt a comparatively larger open-loop gain without affecting closed loop stability. The performance of the IP controller is akin to that of the Predictive controller at LEO and MEO delays whilst it is similar to the VSI controller to GEO delay.

In addition, two 'outer' loop control algorithms were designed to maintain WERdes at the receiver. The adaptive step (AS) algorithm updates the setpoint at fixed intervals but by a variable amount. In contrast, the fast response (FR) algorithm updates the setpoint by a fixed amount but at variable intervals. Simulation results show that power control with FR 'outer' loop algorithm is best suited to yield WERdes. It is established that for a given WERdes, the power costs increase with roundtrip delay. Hence, transmit power consumption at LEO delay is notably smaller than that at MEO or GEO delays. The uncorrelated diffuse multipath component of the fading channel limits the performance of the control scheme. So the transmit power requirements increase as the diffuse multipath component of the fading channel becomes increasingly dominant. As a result, the transmit power consumption increases as a mobile user travels from a rural to an urban surrounding.

University of Southampton
Mehta, Mehul
Mehta, Mehul

Mehta, Mehul (1998) Power control for a mobile satellite system. University of Southampton, Doctoral Thesis.

Record type: Thesis (Doctoral)

Abstract

This thesis describes the design and performance of closed loop power control algorithms for a mobile satellite system. A two-loop control strategy is considered. It consists of a fast-acting 'inner' loop which controls received signal strength to a desired setpoint Pdes (dB) and a slow-acting 'outer' loop which adjusts the setpoint in order to maintain a desired code-word error rate at the receiver, WERdes.

A variety of 'inner' loop controllers were designed. The Predictive 'inner' loop controller forward predicts the channel gain disturbance and then issues appropriate power requests to the transmitter. The linear phase-lag controller attempts to compensate the channel gain disturbance by adopting a suitably large open-loop gain. Phase-lag compensators based on pure Integral, Ragazzini and Smith's design methods were considered. The Variable Step Integral (VSI) controller is shown to be the best choice phase-lag compensator in terms of quality of compensation and control filter complexity. The Predictive controller yields superior compensation at LEO and MEO delays whilst the VSI controller is better suited at GEP delay. The Integro-Predictive (IP) controller is a novel arrangement of a VSI filter followed by a forward predictor. The predictor allows the VSI filter to adopt a comparatively larger open-loop gain without affecting closed loop stability. The performance of the IP controller is akin to that of the Predictive controller at LEO and MEO delays whilst it is similar to the VSI controller to GEO delay.

In addition, two 'outer' loop control algorithms were designed to maintain WERdes at the receiver. The adaptive step (AS) algorithm updates the setpoint at fixed intervals but by a variable amount. In contrast, the fast response (FR) algorithm updates the setpoint by a fixed amount but at variable intervals. Simulation results show that power control with FR 'outer' loop algorithm is best suited to yield WERdes. It is established that for a given WERdes, the power costs increase with roundtrip delay. Hence, transmit power consumption at LEO delay is notably smaller than that at MEO or GEO delays. The uncorrelated diffuse multipath component of the fading channel limits the performance of the control scheme. So the transmit power requirements increase as the diffuse multipath component of the fading channel becomes increasingly dominant. As a result, the transmit power consumption increases as a mobile user travels from a rural to an urban surrounding.

This record has no associated files available for download.

More information

Published date: 1998

Identifiers

Local EPrints ID: 463305
URI: http://eprints.soton.ac.uk/id/eprint/463305
PURE UUID: 3589dc82-7375-4382-b8b0-5c6e719f5c7e

Catalogue record

Date deposited: 04 Jul 2022 20:49
Last modified: 04 Jul 2022 20:49

Export record

Contributors

Author: Mehul Mehta

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×