The University of Southampton
University of Southampton Institutional Repository

Bridging the pressure gap : taking surface science to more realistic pressures

Bridging the pressure gap : taking surface science to more realistic pressures
Bridging the pressure gap : taking surface science to more realistic pressures

Traditional surface science experiments are conducted under ultra high vacuum conditions, this enables surface cleanliness to be strictly controlled and the use of electron based measurements, to determine surface structure and composition. Unfortunately, UHV conditions are very different from those in real world catalysis (e.g. car exhaust clean-up) and only limited insight can be obtained from such studies. For example, it has been found that certain catalytic species do not exist under UHV conditions. It is an essential step in the progression of surface science to move to more realistic conditions whilst still retaining the simplicity enabled by a UHV cleaned, ideal surface such as a single crystal. Within this thesis the development oftwo new pieces of equipment, which bridge this gap, at the SRS at Daresbury Laboratory are presented. The High Pressure Reaction Cell (HPRC), based on the far-IR beamline 13.3 at Daresbury laboratory, enables samples to be cleaned under UHV conditions before being exposed to pressures, inside the cell, of up to 200 mbar of a chosen gas, without compromising the external vacuum. Far-IR RAIRS, which is useful for adsorbate investigations, is unaffected by the presence of a partial pressure of gas, enabling in-situ measurements as well as post experiment UHV measurements. Results are presented for investigations into the high pressure oxidation and reduction of copper, these are supported by DFT calculations of the phonon modes for common copper oxides. The High Ambient Pressure Photoelectron spectroscopY (HAPPY) system is a peripatetic end station designed to allow sample cleaning in UHV, before performing in-situ photoelectron spectroscopy at pressures up to 10.2 mbar. The commissioning experiments in which a commercial supported catalyst was studied are presented. The future of these two newly developed pieces of equipment is discussed alongside the future offar-IR RAIRS as a whole.

University of Southampton
Quin, David John Gilbert
87ec6b4a-3757-469d-b110-57cc53820a8f
Quin, David John Gilbert
87ec6b4a-3757-469d-b110-57cc53820a8f

Quin, David John Gilbert (2007) Bridging the pressure gap : taking surface science to more realistic pressures. University of Southampton, Doctoral Thesis.

Record type: Thesis (Doctoral)

Abstract

Traditional surface science experiments are conducted under ultra high vacuum conditions, this enables surface cleanliness to be strictly controlled and the use of electron based measurements, to determine surface structure and composition. Unfortunately, UHV conditions are very different from those in real world catalysis (e.g. car exhaust clean-up) and only limited insight can be obtained from such studies. For example, it has been found that certain catalytic species do not exist under UHV conditions. It is an essential step in the progression of surface science to move to more realistic conditions whilst still retaining the simplicity enabled by a UHV cleaned, ideal surface such as a single crystal. Within this thesis the development oftwo new pieces of equipment, which bridge this gap, at the SRS at Daresbury Laboratory are presented. The High Pressure Reaction Cell (HPRC), based on the far-IR beamline 13.3 at Daresbury laboratory, enables samples to be cleaned under UHV conditions before being exposed to pressures, inside the cell, of up to 200 mbar of a chosen gas, without compromising the external vacuum. Far-IR RAIRS, which is useful for adsorbate investigations, is unaffected by the presence of a partial pressure of gas, enabling in-situ measurements as well as post experiment UHV measurements. Results are presented for investigations into the high pressure oxidation and reduction of copper, these are supported by DFT calculations of the phonon modes for common copper oxides. The High Ambient Pressure Photoelectron spectroscopY (HAPPY) system is a peripatetic end station designed to allow sample cleaning in UHV, before performing in-situ photoelectron spectroscopy at pressures up to 10.2 mbar. The commissioning experiments in which a commercial supported catalyst was studied are presented. The future of these two newly developed pieces of equipment is discussed alongside the future offar-IR RAIRS as a whole.

Text
1138518.pdf - Version of Record
Available under License University of Southampton Thesis Licence.
Download (4MB)

More information

Published date: 2007

Identifiers

Local EPrints ID: 466455
URI: http://eprints.soton.ac.uk/id/eprint/466455
PURE UUID: 73ccdae5-c3e8-45b4-abbd-bf07e25b6833

Catalogue record

Date deposited: 05 Jul 2022 05:17
Last modified: 16 Mar 2024 20:42

Export record

Contributors

Author: David John Gilbert Quin

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×