The University of Southampton
University of Southampton Institutional Repository

A two-stage electromagnetic coupling and structural optimisation for vibration energy harvesters

A two-stage electromagnetic coupling and structural optimisation for vibration energy harvesters
A two-stage electromagnetic coupling and structural optimisation for vibration energy harvesters
This paper demonstrates a two-stage optimisation for a single-degree-of-freedom (SDOF) electromagnetic vibration energy harvester under a harmonic base excitation vibration. In this paper, a designed cantilever beam was used to verify the optimisation methods. The dynamics of the beam was modelled using the Euler-Bernoulli beam theory. By deriving the exact expression of the power output under the optimum load resistance condition, the correct electromagnetic coupling coefficient was determined. The first optimisation stage involves maximising this coefficient by considering several coils and magnet parameters, allowing at this stage to define the electrical efficiency of the harvester which is described as the ratio of the harvester's power output to its power limit. The experimentally determined power output for this stage was 3.51 mW. The structural aspects of the harvester were then optimised by considering the addition and placement of proof masses and the structural dimensions of the harvester. This part represents the second optimisation and determines the power limit of the harvester. An experimental power output of 7.95 mW was achieved in this stage. All experimental results displayed a good agreement with the derived theoretical model, recording an error of less than 10.0%, hence validating the theoretical model. The first optimisation stage presented here can be applied to any linear electromagnetic SDOF harvester whereas the second optimisation stage can be easily modified to suit different structural considerations. Additionally, both stages can also be slightly modified to account for rotational systems.
two-stage optimisation, electromagnetic vibration energy harvesting, single-degree-of-freedom, electromagnetic coupling, structural
0964-1726
Foong, Faruq Muhammad
c2447e9f-b32a-4d99-a872-c6648903c557
Thein, Chung Ket
be1dc467-d763-46fe-99f6-53e1c03c254d
Yurchenko, Daniil
51a2896b-281e-4977-bb72-5f96e891fbf8
Foong, Faruq Muhammad
c2447e9f-b32a-4d99-a872-c6648903c557
Thein, Chung Ket
be1dc467-d763-46fe-99f6-53e1c03c254d
Yurchenko, Daniil
51a2896b-281e-4977-bb72-5f96e891fbf8

Foong, Faruq Muhammad, Thein, Chung Ket and Yurchenko, Daniil (2020) A two-stage electromagnetic coupling and structural optimisation for vibration energy harvesters. Smart Materials and Structures, 29 (8), [085030]. (doi:10.1088/1361-665X/ab98ee).

Record type: Article

Abstract

This paper demonstrates a two-stage optimisation for a single-degree-of-freedom (SDOF) electromagnetic vibration energy harvester under a harmonic base excitation vibration. In this paper, a designed cantilever beam was used to verify the optimisation methods. The dynamics of the beam was modelled using the Euler-Bernoulli beam theory. By deriving the exact expression of the power output under the optimum load resistance condition, the correct electromagnetic coupling coefficient was determined. The first optimisation stage involves maximising this coefficient by considering several coils and magnet parameters, allowing at this stage to define the electrical efficiency of the harvester which is described as the ratio of the harvester's power output to its power limit. The experimentally determined power output for this stage was 3.51 mW. The structural aspects of the harvester were then optimised by considering the addition and placement of proof masses and the structural dimensions of the harvester. This part represents the second optimisation and determines the power limit of the harvester. An experimental power output of 7.95 mW was achieved in this stage. All experimental results displayed a good agreement with the derived theoretical model, recording an error of less than 10.0%, hence validating the theoretical model. The first optimisation stage presented here can be applied to any linear electromagnetic SDOF harvester whereas the second optimisation stage can be easily modified to suit different structural considerations. Additionally, both stages can also be slightly modified to account for rotational systems.

This record has no associated files available for download.

More information

Accepted/In Press date: 2 June 2020
e-pub ahead of print date: 8 July 2020
Published date: 1 August 2020
Keywords: two-stage optimisation, electromagnetic vibration energy harvesting, single-degree-of-freedom, electromagnetic coupling, structural

Identifiers

Local EPrints ID: 469650
URI: http://eprints.soton.ac.uk/id/eprint/469650
ISSN: 0964-1726
PURE UUID: dc72759f-5ba2-4424-adf8-bee4dac7141b
ORCID for Daniil Yurchenko: ORCID iD orcid.org/0000-0002-4989-3634

Catalogue record

Date deposited: 21 Sep 2022 16:59
Last modified: 17 Mar 2024 04:11

Export record

Altmetrics

Contributors

Author: Faruq Muhammad Foong
Author: Chung Ket Thein
Author: Daniil Yurchenko ORCID iD

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×