The University of Southampton
University of Southampton Institutional Repository

Understanding the friction reduction mechanism based on molybdenum disulfide tribofilm formation and removal

Understanding the friction reduction mechanism based on molybdenum disulfide tribofilm formation and removal
Understanding the friction reduction mechanism based on molybdenum disulfide tribofilm formation and removal
Among friction modifier lubricant additives, molybdenum dialkyldithiocarbamate (MoDTC) provides excellent friction behavior in boundary lubricated tribocontacts. It is well established that the low friction obtained with MoDTC is as a result of the formation of lattice structure MoS2 nanosheets. However, the relationship between the molybdenum species quantity, its distribution on the contact surface, and the friction behavior is not yet fully understood. In this work, Raman microscopy and atomic force microscopy (AFM) have been used with the aim of understanding the link between the friction behavior and the MoDTC/ZDDP tribofilm formation and removal. Tribotests were coupled with a collection of ex-situ Raman intensity maps to analyze the MoS2 tribofilm buildup. Post-test AFM analyses were implemented on the ball wear scar to acquire the average MoDTC/ZDDP tribofilm thickness. In-situ Raman spectra analyses were carried out to detect the MoS2 tribofilm removal. A good correlation was achieved between the friction coefficient measurements and Raman maps when using a linear relationship between the microscopic friction and the local amount of MoS2 tribofilm. After a rapid increase, the average MoDTC/ZDDP tribofilm thickness levels out to a steady state as the friction drop ceases. The removal rate of MoS2 from tribofilms, obtained at different temperatures, suggests that the MoS2 tribofilms are much easier to remove from tribocontacts compared to antiwear ZDDP tribofilms. This is the first study that sets out a framework to link MoS2 amount and coverage to the friction behavior, providing the basis for developing numerical models capable of predicting friction by taking into account tribochemistry processes.
0743-7463
13523-13533
Xu, Dichu
e91ddedf-af9a-4f0c-834b-3e538c2e166b
Wang, Chun
c3a24183-b0ca-43b4-885f-66cba1ae77c5
Espejo, Cayetano
d8f521a2-a28f-436c-8bd5-9b6cafe697f0
Wang, Jiugen
ccec1ab0-f712-44d1-b270-a7e05f5c2131
Neville, Anne
9caf663e-2667-474f-9164-e0d0fc63ac8d
Morina, Ardian
855715bf-365f-42d9-854b-8365bbfd1ebf
Xu, Dichu
e91ddedf-af9a-4f0c-834b-3e538c2e166b
Wang, Chun
c3a24183-b0ca-43b4-885f-66cba1ae77c5
Espejo, Cayetano
d8f521a2-a28f-436c-8bd5-9b6cafe697f0
Wang, Jiugen
ccec1ab0-f712-44d1-b270-a7e05f5c2131
Neville, Anne
9caf663e-2667-474f-9164-e0d0fc63ac8d
Morina, Ardian
855715bf-365f-42d9-854b-8365bbfd1ebf

Xu, Dichu, Wang, Chun, Espejo, Cayetano, Wang, Jiugen, Neville, Anne and Morina, Ardian (2018) Understanding the friction reduction mechanism based on molybdenum disulfide tribofilm formation and removal. Langmuir, 34 (45), 13523-13533. (doi:10.1021/acs.langmuir.8b02329).

Record type: Article

Abstract

Among friction modifier lubricant additives, molybdenum dialkyldithiocarbamate (MoDTC) provides excellent friction behavior in boundary lubricated tribocontacts. It is well established that the low friction obtained with MoDTC is as a result of the formation of lattice structure MoS2 nanosheets. However, the relationship between the molybdenum species quantity, its distribution on the contact surface, and the friction behavior is not yet fully understood. In this work, Raman microscopy and atomic force microscopy (AFM) have been used with the aim of understanding the link between the friction behavior and the MoDTC/ZDDP tribofilm formation and removal. Tribotests were coupled with a collection of ex-situ Raman intensity maps to analyze the MoS2 tribofilm buildup. Post-test AFM analyses were implemented on the ball wear scar to acquire the average MoDTC/ZDDP tribofilm thickness. In-situ Raman spectra analyses were carried out to detect the MoS2 tribofilm removal. A good correlation was achieved between the friction coefficient measurements and Raman maps when using a linear relationship between the microscopic friction and the local amount of MoS2 tribofilm. After a rapid increase, the average MoDTC/ZDDP tribofilm thickness levels out to a steady state as the friction drop ceases. The removal rate of MoS2 from tribofilms, obtained at different temperatures, suggests that the MoS2 tribofilms are much easier to remove from tribocontacts compared to antiwear ZDDP tribofilms. This is the first study that sets out a framework to link MoS2 amount and coverage to the friction behavior, providing the basis for developing numerical models capable of predicting friction by taking into account tribochemistry processes.

This record has no associated files available for download.

More information

e-pub ahead of print date: 22 October 2018
Published date: 13 November 2018
Additional Information: © 2018 American Chemical Society

Identifiers

Local EPrints ID: 471816
URI: http://eprints.soton.ac.uk/id/eprint/471816
ISSN: 0743-7463
PURE UUID: 889599b4-e679-4bc5-9d45-3f1d766108ca

Catalogue record

Date deposited: 21 Nov 2022 17:40
Last modified: 16 Mar 2024 22:19

Export record

Altmetrics

Contributors

Author: Dichu Xu
Author: Chun Wang
Author: Cayetano Espejo
Author: Jiugen Wang
Author: Anne Neville
Author: Ardian Morina

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×