The University of Southampton
University of Southampton Institutional Repository

Tailoring the bending pattern of non-uniformly flexible pitching hydrofoils enhances propulsive efficiency

Tailoring the bending pattern of non-uniformly flexible pitching hydrofoils enhances propulsive efficiency
Tailoring the bending pattern of non-uniformly flexible pitching hydrofoils enhances propulsive efficiency
We present new measurements of non-uniformly flexible pitching foils fabricated with a rigid leading section joined to a flexible trailing section. This construction enables us to vary the bending pattern and resonance condition of the foils independently. A novel effective flexibility, defined as the ratio of added mass forces to elastic forces, is proposed and shown to provide a scaling for the natural frequencies of the fluid-structural system. Foils with very flexible trailing sections of EI < 1.81 × 10−5 N m2 do not show a detectable resonance and are classified as 'non-resonating' as opposed to 'resonating' foils. Moreover, the non-resonating foils exhibit a novel bending pattern where the foil has a discontinuous hinge-like deflection instead of the smooth beam-like deflection of the resonating foils. Performance measurements reveal that both resonating and non-resonating foils can achieve high propulsive efficiencies of around 50% or more. It is discovered that non-uniformly flexible foils outperform their rigid and uniformly flexible counterparts, and that there is an optimal flexion ratio from 0.4 ⩽ λ ⩽ 0.7 that maximizes the efficiency. Furthermore, this optimal range coincides with the flexion ratios observed in nature. Performance is also compared under the same dimensionless flexural rigidity, R*, which highlights that at the same flexion ratio more flexible foils achieve higher peak efficiencies. Overall, to achieve high propulsive efficiency non-uniformly flexible hydrofoils should (1) oscillate above their first natural frequency, (2) have a flexion ratio in the range of 0.4 ⩽ λ ⩽ 0.7 and (3) have a small dimensionless rigidity at their optimal flexion ratio. Scaling laws for rigid pitching foils are found to be valid for non-uniformly flexible foils as long as the measured amplitude response is used and the deflection angle of the trailing section β is < 45°. This work provides guidance for the development of high-performance underwater vehicles using simple purely pitching bio-inspired propulsive drives.
1748-3182
065003
Han, Tianjun
a8def36c-e810-40b6-a2fd-73448f391ef2
Mivehchi, Amin
e3cd21f8-2efd-4b02-9c02-c0fe320e3d24
Kurt, Melike
15dea522-b5e5-4360-8b03-7a68e543c873
Moored, Keith W
9c89d06c-a49a-4ff0-bd32-37d9d143d39a
Han, Tianjun
a8def36c-e810-40b6-a2fd-73448f391ef2
Mivehchi, Amin
e3cd21f8-2efd-4b02-9c02-c0fe320e3d24
Kurt, Melike
15dea522-b5e5-4360-8b03-7a68e543c873
Moored, Keith W
9c89d06c-a49a-4ff0-bd32-37d9d143d39a

Han, Tianjun, Mivehchi, Amin, Kurt, Melike and Moored, Keith W (2022) Tailoring the bending pattern of non-uniformly flexible pitching hydrofoils enhances propulsive efficiency. Bioinspiration & Biomimetics, 17 (6), 065003. (doi:10.1088/1748-3190/ac7f70).

Record type: Article

Abstract

We present new measurements of non-uniformly flexible pitching foils fabricated with a rigid leading section joined to a flexible trailing section. This construction enables us to vary the bending pattern and resonance condition of the foils independently. A novel effective flexibility, defined as the ratio of added mass forces to elastic forces, is proposed and shown to provide a scaling for the natural frequencies of the fluid-structural system. Foils with very flexible trailing sections of EI < 1.81 × 10−5 N m2 do not show a detectable resonance and are classified as 'non-resonating' as opposed to 'resonating' foils. Moreover, the non-resonating foils exhibit a novel bending pattern where the foil has a discontinuous hinge-like deflection instead of the smooth beam-like deflection of the resonating foils. Performance measurements reveal that both resonating and non-resonating foils can achieve high propulsive efficiencies of around 50% or more. It is discovered that non-uniformly flexible foils outperform their rigid and uniformly flexible counterparts, and that there is an optimal flexion ratio from 0.4 ⩽ λ ⩽ 0.7 that maximizes the efficiency. Furthermore, this optimal range coincides with the flexion ratios observed in nature. Performance is also compared under the same dimensionless flexural rigidity, R*, which highlights that at the same flexion ratio more flexible foils achieve higher peak efficiencies. Overall, to achieve high propulsive efficiency non-uniformly flexible hydrofoils should (1) oscillate above their first natural frequency, (2) have a flexion ratio in the range of 0.4 ⩽ λ ⩽ 0.7 and (3) have a small dimensionless rigidity at their optimal flexion ratio. Scaling laws for rigid pitching foils are found to be valid for non-uniformly flexible foils as long as the measured amplitude response is used and the deflection angle of the trailing section β is < 45°. This work provides guidance for the development of high-performance underwater vehicles using simple purely pitching bio-inspired propulsive drives.

This record has no associated files available for download.

More information

Accepted/In Press date: 7 July 2022
e-pub ahead of print date: 7 September 2022
Published date: 1 November 2022

Identifiers

Local EPrints ID: 474761
URI: http://eprints.soton.ac.uk/id/eprint/474761
ISSN: 1748-3182
PURE UUID: 357d54f9-77d0-478d-9145-bb6b3ba0fccf
ORCID for Melike Kurt: ORCID iD orcid.org/0000-0001-6711-7025

Catalogue record

Date deposited: 02 Mar 2023 17:43
Last modified: 17 Mar 2024 04:05

Export record

Altmetrics

Contributors

Author: Tianjun Han
Author: Amin Mivehchi
Author: Melike Kurt ORCID iD
Author: Keith W Moored

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×