Experimental study of variable thermal lens in a two-stage chirped-pulse high-power Ti:sapphire amplifier at 1kHz
Experimental study of variable thermal lens in a two-stage chirped-pulse high-power Ti:sapphire amplifier at 1kHz
In general, misalignment, surface quality of optical components, thermal and nonlinear properties, doping level and inhomogeneity in the gain material can induce unexpected pulse propagation effects on intnese femtosecond laser pulses. Among them, the thermal lens in a thermally loaded material is more serious since it limits power scaling and degrades maximum achievable intensity at the focus by introducing distortion into the wavefront. Thereby, an understanding of thermally distortion wavefront is of great importance for optimum design of high power laser amplifiers and efficient serving femtosecond lasers in various specific applications. In this paper, we experimentally studied beam quality and wavefront distortion in a longitudinally pumped two-stage chirped pulse high power Ti:sapphire amplifier laser at 1 kHz operation in terms of pump power. The amplifier crystals are cooled thermoelectrically to below −10 °C. A simple formula for coupling the thermal lens in a two-stage amplifier consists of a regenerative amplifier followed by a single-pass amplifier pumped equally by the Nd:YLF laser at 527 nm with maximum average output power of 44 W and 130 ns pulse duration at 1 kHz is presented. The wavefront curvature of the compressed laser pulses with ∼40 fs pulse duration and center wavelength of 800 nm is evaluated directly by Shack-Hartmann Wavefront Sensor (SHWS) with help of the Zernike polynomials. While the beam radius and spatial beam quality M2 factor are estimated by knife-edge testing. Also, the optical wavefront distortion caused by an iris inserted into the beam path of a high power laser for quick spot size adjustment has been presented. When diameter of the iris is about 75% of the laser beam size (corresponding to 67% fraction transmission), laser beam distortion associated with the iris is negligible.
715-726
Shayeganrad, Gholamreza
8ea55a9a-4fe2-49df-a0f4-55fa81596dab
December 2018
Shayeganrad, Gholamreza
8ea55a9a-4fe2-49df-a0f4-55fa81596dab
Shayeganrad, Gholamreza
(2018)
Experimental study of variable thermal lens in a two-stage chirped-pulse high-power Ti:sapphire amplifier at 1kHz.
Optik - International Journal for Light and Electron Optics, 174, .
(doi:10.1016/j.ijleo.2018.08.120).
Abstract
In general, misalignment, surface quality of optical components, thermal and nonlinear properties, doping level and inhomogeneity in the gain material can induce unexpected pulse propagation effects on intnese femtosecond laser pulses. Among them, the thermal lens in a thermally loaded material is more serious since it limits power scaling and degrades maximum achievable intensity at the focus by introducing distortion into the wavefront. Thereby, an understanding of thermally distortion wavefront is of great importance for optimum design of high power laser amplifiers and efficient serving femtosecond lasers in various specific applications. In this paper, we experimentally studied beam quality and wavefront distortion in a longitudinally pumped two-stage chirped pulse high power Ti:sapphire amplifier laser at 1 kHz operation in terms of pump power. The amplifier crystals are cooled thermoelectrically to below −10 °C. A simple formula for coupling the thermal lens in a two-stage amplifier consists of a regenerative amplifier followed by a single-pass amplifier pumped equally by the Nd:YLF laser at 527 nm with maximum average output power of 44 W and 130 ns pulse duration at 1 kHz is presented. The wavefront curvature of the compressed laser pulses with ∼40 fs pulse duration and center wavelength of 800 nm is evaluated directly by Shack-Hartmann Wavefront Sensor (SHWS) with help of the Zernike polynomials. While the beam radius and spatial beam quality M2 factor are estimated by knife-edge testing. Also, the optical wavefront distortion caused by an iris inserted into the beam path of a high power laser for quick spot size adjustment has been presented. When diameter of the iris is about 75% of the laser beam size (corresponding to 67% fraction transmission), laser beam distortion associated with the iris is negligible.
This record has no associated files available for download.
More information
Accepted/In Press date: 26 August 2018
e-pub ahead of print date: 5 September 2018
Published date: December 2018
Identifiers
Local EPrints ID: 479085
URI: http://eprints.soton.ac.uk/id/eprint/479085
ISSN: 0030-4026
PURE UUID: 68f992d9-6076-497a-b531-2424336d95da
Catalogue record
Date deposited: 20 Jul 2023 16:32
Last modified: 17 Mar 2024 03:53
Export record
Altmetrics
Download statistics
Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.
View more statistics
