On nanocomposite fabrication: using rheology to characterize filler/polymer interactions in epoxy-based nanocomposites

Abstract

The interactions that occur between an amorphous silicon nitride (Si₃N₄) nanofiller and an epoxy matrix are examined, as revealed by rheological changes in a diglycidyl ether of bisphenol-A (DGEBA)-based epoxy resin prior to curing and thermal analysis, scanning electron microscopy, and dielectric spectroscopy of the resulting amine-cured systems. The results show that isothermally heating the as-received Si₃N₄ in DGEBA at 100 °C leads to increases in the viscosity of the mixture. Analysis of rheological data obtained from unfilled, as-received Si₃N₄ -filled, and calcined Si₃N₄ -filled epoxy systems leads us to interpret this increase in viscosity as arising from reactions between epoxide groups of the DGEBA and nanoparticle surface groups, notably involving surface amines, which are stimulated by the elevated temperature. The extent of this filler/resin reaction depends on the material processing protocol used, particularly prior calcination of the Si3N4 and the temperature and duration of nanoparticle/DGEBA mixing. Glass transition temperature data show that cured samples prepared using different methods have significantly different glass transition temperatures, which is a consequence of the epoxide/amine stoichiometric imbalances that result from prior reactions between the Si₃N₄  and the DGEBA. Consistent behavior was observed in the dielectric response. These results demonstrate that ultimate macroscopic properties of Si₃N₄ /epoxy nanocomposites are critically affected by details of the processing protocol. Furthermore, we infer that, by using controlled prior calcination of the Si₃N₄ , it is may be possible to vary the initial surface chemistry of the nanoparticles so as to adjust their reactivity with epoxy-containing moieties. Here, this is exemplified using only two somewhat extreme thermal treatments and a bifunctional DGEBA-type compound but, we suggest, that the concept may be extended to many other mono- and polyfunctional epoxy-containing compounds in order to generate a wide range of different grafted nanoparticle systems. This strategy may provide a versatile means of adjusting the surface chemistry of inorganic nitride nanoparticles, in order to tailor their surface chemistry and thereby modify resulting nanocomposite properties.

More information

Identifiers

ORCID for Alun Vaughan: orcid.org/0000-0002-0535-513X

ORCID for Thomas Andritsch: orcid.org/0000-0002-3462-022X

Catalogue record

Export record

Altmetrics