The University of Southampton
University of Southampton Institutional Repository

Improved thermal performances of resonant reflection waveguide grating structure

Improved thermal performances of resonant reflection waveguide grating structure
Improved thermal performances of resonant reflection waveguide grating structure

We present the intra-cavity characterization (within an Yb:YAG thin-disk oscillator) of a single-layer resonant waveguide grating (RWG) using a crystalline material (namely Sapphire) as substrate. The operating principle of the present device is the same as in [1]. It offers high reflectivity > 99% with a narrow spectral bandwidth of typically <1 nm FWHM for a given polarization and angle of incidence. Commonly single-layer dielectric waveguide gratings are based on sub-wavelength grating integrated with a high-index waveguide (such as Ta2O5 or Nb2O5) coated on a fused silica substrate. Often, they suffer from heating caused by the absorption in the waveguide layer, in addition to the relatively low thermal conductivity of the substrate, thus limiting their applications in high average power lasers. In the present contribution, we report on a RWG composed of a Ta2O5 waveguide layer coated on a structured sapphire substrate with better thermal performance at high average laser power (i.e., at high-power densities on the grating surface). The designed device consists of a single Ta2O5 layer of 200-235 nm thickness deposited upon a binary grating with a period of 515 nm and a groove depth of 120 nm etched into a sapphire (Al2O3) substrate [2]. The RWG was designed to operate for TE polarization at 1030 nm and an angle of incidence of ~ 10°.The suitable choice of substrate material offers a thermal conductivity that is an order of magnitude higher than fused silica. Before its implementation in the laser cavity, the fabricated sample was first characterized in a spectroscopic setup to measure its reflectivity for both TE and TM polarizations. At the central wavelength of our laser i.e. 1030 nm, the reflectivity for TE and TM polarizations were measured to be R TE = 99.2 ± 0.2% a R TM = 8 ± 0.2%, respectively.

IEEE
Boubekraoui, Ayoub
403339c3-b89b-4ece-a33a-59ea6809c818
Bashir, Danish
534a36c9-f44e-432e-8f62-7fef91a6c0ed
Mourkioti, Georgia
fdbd699f-f21a-4e85-98bb-f961bd59b19f
Mackenzie, Jacob
1d82c826-fdbf-425b-ac04-be43ccf12008
Graf, Thomas
a8f9f5c7-fae6-459b-a970-2b8a25f412cb
Ahmed, Marwan Abdou
ea6f8609-ca30-46f0-96cf-709009811b95
Boubekraoui, Ayoub
403339c3-b89b-4ece-a33a-59ea6809c818
Bashir, Danish
534a36c9-f44e-432e-8f62-7fef91a6c0ed
Mourkioti, Georgia
fdbd699f-f21a-4e85-98bb-f961bd59b19f
Mackenzie, Jacob
1d82c826-fdbf-425b-ac04-be43ccf12008
Graf, Thomas
a8f9f5c7-fae6-459b-a970-2b8a25f412cb
Ahmed, Marwan Abdou
ea6f8609-ca30-46f0-96cf-709009811b95

Boubekraoui, Ayoub, Bashir, Danish, Mourkioti, Georgia, Mackenzie, Jacob, Graf, Thomas and Ahmed, Marwan Abdou (2023) Improved thermal performances of resonant reflection waveguide grating structure. In 2023 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2023. IEEE. 1 pp . (doi:10.1109/CLEO/Europe-EQEC57999.2023.10232337).

Record type: Conference or Workshop Item (Paper)

Abstract

We present the intra-cavity characterization (within an Yb:YAG thin-disk oscillator) of a single-layer resonant waveguide grating (RWG) using a crystalline material (namely Sapphire) as substrate. The operating principle of the present device is the same as in [1]. It offers high reflectivity > 99% with a narrow spectral bandwidth of typically <1 nm FWHM for a given polarization and angle of incidence. Commonly single-layer dielectric waveguide gratings are based on sub-wavelength grating integrated with a high-index waveguide (such as Ta2O5 or Nb2O5) coated on a fused silica substrate. Often, they suffer from heating caused by the absorption in the waveguide layer, in addition to the relatively low thermal conductivity of the substrate, thus limiting their applications in high average power lasers. In the present contribution, we report on a RWG composed of a Ta2O5 waveguide layer coated on a structured sapphire substrate with better thermal performance at high average laser power (i.e., at high-power densities on the grating surface). The designed device consists of a single Ta2O5 layer of 200-235 nm thickness deposited upon a binary grating with a period of 515 nm and a groove depth of 120 nm etched into a sapphire (Al2O3) substrate [2]. The RWG was designed to operate for TE polarization at 1030 nm and an angle of incidence of ~ 10°.The suitable choice of substrate material offers a thermal conductivity that is an order of magnitude higher than fused silica. Before its implementation in the laser cavity, the fabricated sample was first characterized in a spectroscopic setup to measure its reflectivity for both TE and TM polarizations. At the central wavelength of our laser i.e. 1030 nm, the reflectivity for TE and TM polarizations were measured to be R TE = 99.2 ± 0.2% a R TM = 8 ± 0.2%, respectively.

Text
Boubekraoui_CLEO_Munich2023_CA-9-2 - Accepted Manuscript
Download (406kB)

More information

Published date: 4 September 2023
Additional Information: Funding Information: Acknowledgments: This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No.813159 Publisher Copyright: © 2023 IEEE.
Venue - Dates: 2023 Conference on Lasers and Electro-Optics Europe &amp; European Quantum Electronics Conference (CLEO/Europe-EQEC), , Munich, Germany, 2023-06-26 - 2023-06-30

Identifiers

Local EPrints ID: 481901
URI: http://eprints.soton.ac.uk/id/eprint/481901
PURE UUID: 26b68230-88a6-4659-839c-590d144101db
ORCID for Jacob Mackenzie: ORCID iD orcid.org/0000-0002-3355-6051

Catalogue record

Date deposited: 12 Sep 2023 17:00
Last modified: 18 Mar 2024 02:52

Export record

Altmetrics

Contributors

Author: Ayoub Boubekraoui
Author: Danish Bashir
Author: Jacob Mackenzie ORCID iD
Author: Thomas Graf
Author: Marwan Abdou Ahmed

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×