READ ME File For 'Dataset supporting an article "Amplified O-band WDM Transmission using a Bi-doped Fibre Amplifier"'

Dataset DOI: 10.5258/SOTON/D0422

Date that the file was created: February, 2024

-------------------
GENERAL INFORMATION
-------------------

ReadMe Author: Natsupa Taengnoi, University of Southampton 


--------------------------
SHARING/ACCESS INFORMATION
-------------------------- 

Licenses/restrictions placed on the data, or limitations of reuse: CC BY

Recommended citation for the data:

This dataset supports the publication:
N. Taengnoi et al.,
"Amplified O-Band WDM Transmission Using a Bi-Doped Fibre Amplifier"
2018 European Conference on Optical Communication (ECOC), 
Rome, Italy, 2018, pp. 1-3, 
doi: 10.1109/ECOC.2018.8535369


--------------------
DATA & FILE OVERVIEW
--------------------


The figures in this data demonstrate WDM transmission on both a coarse and dense spacing over 100km and 120km of SMF-28e, respectively, using mid-span amplification with a Bismuth-doped fibre amplifier exhibiting 7THz (42nm) of gain bandwidth. Negligible power penalties are observed for all signals.


This dataset contains:

The data for each figure is contained within a directory of the same name. Data files are named after the Figure they correspond to and contain the data necessary to recreate the plots.

Fig-1

Fig-1-a.csv contains all of the data for Fig-1-a. The units for each column are described in the header.

Fig-1-b.csv contains all of the data for Fig-1-b. The units for each column are described in the header.

Fig-1-c.csv contains all of the data for Fig-1-c. The units for each column are described in the header.

Fig-1-d.csv contains all of the data for Fig-1-d. The units for each column are described in the header.

Fig-1-e.csv contains all of the data for Fig-1-e. The units for each column are described in the header.

Fig-1-f.csv contains all of the data for Fig-1-f. The units for each column are described in the header.

Fig-1-g.csv contains all of the data for Fig-1-g. The units for each column are described in the header.

Fig-1-h.csv contains all of the data for Fig-1-h. The units for each column are described in the header.


Fig-2

Fig-2-a.csv contains all of the data for Fig-2-a. The units for each column are described in the header.

Fig-2-b.csv contains all of the data for Fig-2-b. The units for each column are described in the header.

Fig-2-c.csv contains all of the data for Fig-2-c. The units for each column are described in the header.

Fig-2-d.csv contains all of the data for Fig-2-d. The units for each column are described in the header.

Fig-2-e.csv contains all of the data for Fig-2-e. The units for each column are described in the header.

Fig-2-f.csv contains all of the data for Fig-2-f. The units for each column are described in the header.

Fig-2-g.csv contains all of the data for Fig-2-g. The units for each column are described in the header.

Fig-2-h.csv contains all of the data for Fig-2-h. The units for each column are described in the header.

Fig-2-i.csv contains all of the data for Fig-2-i. The units for each column are described in the header.