READ ME File For 'Investigating the mechanical failures at the bonded joints of screen-printed e-textile circuits' Dataset DOI: 10.5258/SOTON/D2192 Date that the file was created: 16th April, 2024 ------------------- GENERAL INFORMATION ------------------- ReadMe Author: Abiodun Komolafe, University of Southampton Date of data collection: Bending test results were collected within the period March 2020 to July 2021 Information about geographic location of data collection: University of Southampton This work is funded under WEARPLEX project with a Grant agreement ID: 825339 under the Horizon 2020 EU funding – ICT-02-2018 -------------------------- SHARING/ACCESS INFORMATION -------------------------- Dataset available under a CC BY 4.0 licence Publisher: University of Southampton, U.K. Recommended citation for the data: This dataset supports the publication: AUTHORS:Abiodun KomolafE and Russel Torah TITLE:Investigating the mechanical failures at the bonded joints of screen-printed e-textile circuits CONFERENCE: International Conference on the Challenges, Opportunities, Innovations and Applications in Electronic Textiles (E-Textiles 2021), Manchester UK, 4th, November 2021. PAPER DOI IF KNOWN: https://doi.org/10.3390/engproc2022015017 -------------------- DATA & FILE OVERVIEW -------------------- This dataset contains experimental data for the following figures in the paper: Figure 6: Normalised resistance change of samples using conductive epoxy before failure (left) and after failure (right) Figure 7: Normalised resistance changes of samples using pressure-bonded conductive film (left) and conductive epoxy + conductive film (right) -------------------------- METHODOLOGICAL INFORMATION -------------------------- Bending test results were obtained using Keithley 2000 Multimeter via a LabVIEW interface. Analysis of data was performed with Microsoft Excel.