Stacked Intelligent Metasurfaces for Holographic MIMO Aided Cell-Free Networks
Stacked Intelligent Metasurfaces for Holographic MIMO Aided Cell-Free Networks
Large-scale multiple-input and multiple-output (MIMO) systems are capable of achieving high date rate. However, given the high hardware cost and excessive power consumption of massive MIMO systems, as a remedy, intelligent metasurfaces have been designed for efficient holographic MIMO (HMIMO) systems. In this paper, we propose a HMIMO architecture based on stacked intelligent metasurfaces (SIM) for the uplink of cell-free systems, where the SIM is employed at the access points (APs) for improving the spectral- and energy-efficiency. Specifically, we conceive distributed beamforming for SIM-assisted cell-free networks, where both the SIM coefficients and the local receiver combiner vectors of each AP are optimized based on the local channel state information (CSI) for the local detection of each user equipment (UE) information. Afterward, the central processing unit (CPU) fuses the local detections gleaned from all APs to detect the aggregate multi-user signal. Specifically, to design the SIM coefficients and the combining vectors of the APs, a low-complexity layer-by-layer iterative optimization algorithm is proposed for maximizing the equivalent gain of the channel spanning from the UEs to the APs. At the CPU, the weight vector used for combining the local detections from all APs is designed based on the minimum mean square error (MMSE) criterion, where the hardware impairments (HWIs) are also taken into consideration based on their statistics. The simulation results show that the SIM-based HMIMO outperforms the conventional single-layer HMIMO in terms of the achievable rate. We demonstrate that both the HWI of the radio frequency (RF) chains at the APs and the UEs limit the achievable rate in the high signal-to-noise-ratio (SNR) region.
cell-free network, Computer architecture, Hardware, hardware impairment (HWI), Holographic multiple-input and multiple-output (HMIMO), Massive MIMO, Metasurfaces, Radio frequency, Simulation, stacked intelligent metasurface (SIM), Vectors
1
Li, Qingchao
504bc1ac-445e-4750-93ab-6ebe01591c9a
El-Hajjar, Mohammed
3a829028-a427-4123-b885-2bab81a44b6f
Xu, Chao
5710a067-6320-4f5a-8689-7881f6c46252
An, Jiancheng
5fa38cfb-6010-4404-a39c-f03c68f248c5
Yuen, Chau
0dd04333-bade-4812-b3df-a416597f1325
Hanzo, Lajos
66e7266f-3066-4fc0-8391-e000acce71a1
20 May 2024
Li, Qingchao
504bc1ac-445e-4750-93ab-6ebe01591c9a
El-Hajjar, Mohammed
3a829028-a427-4123-b885-2bab81a44b6f
Xu, Chao
5710a067-6320-4f5a-8689-7881f6c46252
An, Jiancheng
5fa38cfb-6010-4404-a39c-f03c68f248c5
Yuen, Chau
0dd04333-bade-4812-b3df-a416597f1325
Hanzo, Lajos
66e7266f-3066-4fc0-8391-e000acce71a1
Li, Qingchao, El-Hajjar, Mohammed, Xu, Chao, An, Jiancheng, Yuen, Chau and Hanzo, Lajos
(2024)
Stacked Intelligent Metasurfaces for Holographic MIMO Aided Cell-Free Networks.
IEEE Transactions on Communications, , [10535263].
(doi:10.1109/TCOMM.2024.3403499).
Abstract
Large-scale multiple-input and multiple-output (MIMO) systems are capable of achieving high date rate. However, given the high hardware cost and excessive power consumption of massive MIMO systems, as a remedy, intelligent metasurfaces have been designed for efficient holographic MIMO (HMIMO) systems. In this paper, we propose a HMIMO architecture based on stacked intelligent metasurfaces (SIM) for the uplink of cell-free systems, where the SIM is employed at the access points (APs) for improving the spectral- and energy-efficiency. Specifically, we conceive distributed beamforming for SIM-assisted cell-free networks, where both the SIM coefficients and the local receiver combiner vectors of each AP are optimized based on the local channel state information (CSI) for the local detection of each user equipment (UE) information. Afterward, the central processing unit (CPU) fuses the local detections gleaned from all APs to detect the aggregate multi-user signal. Specifically, to design the SIM coefficients and the combining vectors of the APs, a low-complexity layer-by-layer iterative optimization algorithm is proposed for maximizing the equivalent gain of the channel spanning from the UEs to the APs. At the CPU, the weight vector used for combining the local detections from all APs is designed based on the minimum mean square error (MMSE) criterion, where the hardware impairments (HWIs) are also taken into consideration based on their statistics. The simulation results show that the SIM-based HMIMO outperforms the conventional single-layer HMIMO in terms of the achievable rate. We demonstrate that both the HWI of the radio frequency (RF) chains at the APs and the UEs limit the achievable rate in the high signal-to-noise-ratio (SNR) region.
Text
TAMS
- Accepted Manuscript
More information
Accepted/In Press date: 14 May 2024
e-pub ahead of print date: 20 May 2024
Published date: 20 May 2024
Additional Information:
Publisher Copyright:
IEEE
Keywords:
cell-free network, Computer architecture, Hardware, hardware impairment (HWI), Holographic multiple-input and multiple-output (HMIMO), Massive MIMO, Metasurfaces, Radio frequency, Simulation, stacked intelligent metasurface (SIM), Vectors
Identifiers
Local EPrints ID: 490294
URI: http://eprints.soton.ac.uk/id/eprint/490294
ISSN: 0090-6778
PURE UUID: 59051d2f-22b9-419a-9047-954e4fc5ea68
Catalogue record
Date deposited: 23 May 2024 16:39
Last modified: 11 Jun 2024 02:09
Export record
Altmetrics
Download statistics
Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.
View more statistics