Flow visualization and PIV measurements of flow around a sport utility vehicle model

Lamy, Alban, Hamel, Amandine, Vanderwel, Christina, Tavoularis, Stavros and Kourta, Azeddine (2011) Flow visualization and PIV measurements of flow around a sport utility vehicle model. In Proceedings of the ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels. ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting. vol. 1, The American Society of Mechanical Engineers. pp. 2587-2593 . (doi:10.1115/FEDSM-ICNMM2010-30193).

Abstract

The instantaneous flow structure around a 1:18 scaled model of a square-back sport utility vehicle (Hummer H2) was documented in a low-speed water tunnel. The study comprises both flows with the model fixed on a flat plate and flows with the model's wheels rolling on an endless belt that moved with the speed of the free stream, thus simulating ground effects. The flow structure was investigated using flow visualization by dye injection as well as particle image velocimetry (PIV) for several Reynolds numbers in the range of 7000 to 27700. The flow along the roof, the sidewalls, and the underbody was observed to separate at the rear edges of the body, creating a recirculation zone at the rear of the vehicle, which is associated with pressure loss and a major contribution to aerodynamic drag. In the vertical plane of symmetry, this recirculation zone appears as two counter-rotating vortices. With a fixed ground, the lower vortex was less energetic than the upper vortex because the boundary layer that developed along the ground upstream of the model reduced the momentum of the flow below the vehicle. This boundary layer was also observed to separate from the ground behind the vehicle, creating a third vortex located further downstream along the ground. This boundary layer separation forced the bottom vortex to remain attached to the base of the vehicle, whereas the upper vortex was advected in the wake. The dimensionless frequency (Strouhal number) of the vortex shedding process from the roof was found to be in the range of 0.1 to 0.9. With a moving ground, the upper vortex behaved similarly to that in the fixed ground configuration; however, in the absence of the boundary layer along the ground, the lower vortex was typically stronger and its location showed some variability. In both configurations, the Reynolds number had little influence on the wake topology, mostly increasing the turbulence intensity without modifying the main flow pattern.

This record has no associated files available for download.

Contributors

Author: Christina Vanderwel

Download statistics