The University of Southampton
University of Southampton Institutional Repository

Label-free smartphone quantitation of bacteria by darkfield imaging of light scattering in fluoropolymer micro capillary film allows portable detection of bacteriophage lysis

Label-free smartphone quantitation of bacteria by darkfield imaging of light scattering in fluoropolymer micro capillary film allows portable detection of bacteriophage lysis
Label-free smartphone quantitation of bacteria by darkfield imaging of light scattering in fluoropolymer micro capillary film allows portable detection of bacteriophage lysis
Conventional methods for the detection and quantitation of bacteria are slow, laborious and require a laboratory. Microfluidic systems offer faster and portable testing, and smartphone cameras can record colorimetric or fluorometric bioassays, but this requires dye addition. Here, we demonstrate for the first time label-free smartphone detection of bacterial light scattering by darkfield microfluidic imaging to measure bacteria and bacteriophage lysis. A single LED and portable 3D printed imaging box allowed bacterial concentration and growth to be measured by direct imaging of bacterial light scattering. Bacteriophage lysis was detected within a 10-channel microfluidic device made from melt-extruded fluoropolymer micro capillary film, allowing rapid detection of host specificity. Elimination of unwanted reflections and optimising illumination angle are critical for successful darkfield bacterial imaging, with 15° giving maximal intensity. Bacterial sedimentation was directly observed within microfluidic devices, and detection sensitivity significantly increased by allowing bacteria to sediment for 30 min. With this simple, low-cost, 3D printed system bacterial concentrations down to an optical density of 0.1 could be measured corresponding to 8 × 104 colony forming units (CFU) per microdevice, approaching the sensitivity of conventional spectrophotometers. Bacteriophage lysis could be detected at a range of starting cell concentrations. With a low starting cell concentration, the increase in light scatter signal with incubation was prevented in the presence of bacteriophage. Conversely, with high starting cell concentration, the light scatter signal detected at the start was clearly eliminated when phage were added, indicating this simple system allows direct visualisation of bacteriophage eliminating light scattering by lysis.
0925-4005
Donmez, Sultan Itayda
d603a603-da60-4e73-b3ac-966f4684f4a0
Needs, Sarah H.
6dd8aa24-d1de-4429-9b0a-65e82204db58
Osborn, Helen M.I.
dfe7b84a-38d7-49d3-a57a-b445b33d884e
Edwards, Alexander D.
bc3d9b93-a533-4144-937b-c673d0a28879
Donmez, Sultan Itayda
d603a603-da60-4e73-b3ac-966f4684f4a0
Needs, Sarah H.
6dd8aa24-d1de-4429-9b0a-65e82204db58
Osborn, Helen M.I.
dfe7b84a-38d7-49d3-a57a-b445b33d884e
Edwards, Alexander D.
bc3d9b93-a533-4144-937b-c673d0a28879

Donmez, Sultan Itayda, Needs, Sarah H., Osborn, Helen M.I. and Edwards, Alexander D. (2020) Label-free smartphone quantitation of bacteria by darkfield imaging of light scattering in fluoropolymer micro capillary film allows portable detection of bacteriophage lysis. Sensors and Actuators B: Chemical, 323, [128645]. (doi:10.1016/j.snb.2020.128645).

Record type: Article

Abstract

Conventional methods for the detection and quantitation of bacteria are slow, laborious and require a laboratory. Microfluidic systems offer faster and portable testing, and smartphone cameras can record colorimetric or fluorometric bioassays, but this requires dye addition. Here, we demonstrate for the first time label-free smartphone detection of bacterial light scattering by darkfield microfluidic imaging to measure bacteria and bacteriophage lysis. A single LED and portable 3D printed imaging box allowed bacterial concentration and growth to be measured by direct imaging of bacterial light scattering. Bacteriophage lysis was detected within a 10-channel microfluidic device made from melt-extruded fluoropolymer micro capillary film, allowing rapid detection of host specificity. Elimination of unwanted reflections and optimising illumination angle are critical for successful darkfield bacterial imaging, with 15° giving maximal intensity. Bacterial sedimentation was directly observed within microfluidic devices, and detection sensitivity significantly increased by allowing bacteria to sediment for 30 min. With this simple, low-cost, 3D printed system bacterial concentrations down to an optical density of 0.1 could be measured corresponding to 8 × 104 colony forming units (CFU) per microdevice, approaching the sensitivity of conventional spectrophotometers. Bacteriophage lysis could be detected at a range of starting cell concentrations. With a low starting cell concentration, the increase in light scatter signal with incubation was prevented in the presence of bacteriophage. Conversely, with high starting cell concentration, the light scatter signal detected at the start was clearly eliminated when phage were added, indicating this simple system allows direct visualisation of bacteriophage eliminating light scattering by lysis.

Text
Donmez_manuscript_Accepted manuscript - Accepted Manuscript
Download (842kB)

More information

Accepted/In Press date: 23 July 2020
e-pub ahead of print date: 1 August 2020
Published date: 6 August 2020

Identifiers

Local EPrints ID: 494658
URI: http://eprints.soton.ac.uk/id/eprint/494658
ISSN: 0925-4005
PURE UUID: 3eeb4ae4-29c1-484a-9763-da6c7e03f9b7
ORCID for Alexander D. Edwards: ORCID iD orcid.org/0000-0003-2369-989X

Catalogue record

Date deposited: 11 Oct 2024 17:00
Last modified: 12 Oct 2024 04:01

Export record

Altmetrics

Contributors

Author: Sultan Itayda Donmez
Author: Sarah H. Needs
Author: Helen M.I. Osborn
Author: Alexander D. Edwards ORCID iD

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×